Research

Modelling a buffered impact damper system using a spring-damper model of impact


Reference:

Li, K. and Darby, A., 2009. Modelling a buffered impact damper system using a spring-damper model of impact. Structural Control and Health Monitoring, 16 (3), pp. 287-302.

Related documents:

This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below. (Contact Author)

Official URL:

http://dx.doi.org/10.1002/stc.238

Abstract

This paper presents a simple, practical method of modelling non-destructive impacts macroscopically, where the impact force and post-impact motion of the impacting bodies are of primary concern. The main focus is use of the model for simulating the dynamics of impact dampers used to control the response complex structures. A spring-damper pair is used to model the contact surface between the damper mass and the structure. The key to such a model is the ability to define the contact surface spring stiffness and damping parameters, which does not relate to simple mechanical properties under high-rate loading. A method is developed to derive these parameters by making use of experimentally measured coefficient of restitution and contact time of an impact. The model is able to represent contact force and elastic deformation during an impact process. A simple structure, controlled by an impact damper, is used to compare theoretical and experimental results and demonstrate the validity of the resulting spring-damper model. The results demonstrate that the spring-damper model can be effectively used in situations where the impulse-momentum model fails.

Details

Item Type Articles
CreatorsLi, K.and Darby, A.
DOI10.1002/stc.238
DepartmentsFaculty of Engineering & Design > Architecture & Civil Engineering
RefereedYes
StatusPublished
ID Code13943

Export

Actions (login required)

View Item