Quantifying the effects of biodiesel blend ratio, at varying ambient temperatures, on vehicle performance and emissions
Bannister, C., Hawley, J. G., Ali, H., Chuck, C. and Price, P., 2009. Quantifying the effects of biodiesel blend ratio, at varying ambient temperatures, on vehicle performance and emissions. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 2009-06-15 - 2009-06-17, Florence.
Related documents:This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below. (Contact Author)
A number of studies have been carried out examining the impact of biodiesel blend ratio on vehicle performance and emissions, however there is relatively little data available on the interaction between blend ratio and reduced ambient temperatures over the New European Drive Cycle (NEDC). This study examines the effects of increasing the blend ratio of Rapeseed Methyl Ester (RME) on the NEDC fuel consumption and tailpipe emissions of a vehicle equipped with a 2.0 litre common rail diesel engine, tested on a chassis dynamometer at ambient temperatures of 25, 10 & -5°C. This study found that under low temperature ambient conditions increasing blend ratios had a significant detrimental effect on vehicle particulate emissions reversing the benefits observed at higher ambient temperatures. Blend ratio was found to have minimal impact on hydrocarbon emissions regardless of ambient temperature while carbon monoxide and NOx emissions were found to increase by up to 20% and 5.5% respectively. Fuel consumption rose by 5% for a B50 blend - a larger than expected increase when considering differences in calorific values alone.
|Item Type||Conference or Workshop Items (Paper)|
|Creators||Bannister, C., Hawley, J. G., Ali, H., Chuck, C. and Price, P.|
|Departments||Faculty of Engineering & Design > Mechanical Engineering|
Faculty of Engineering & Design
Faculty of Engineering & Design > Chemical Engineering
|Research Centres||Powertrain & Vehicle Research Centre|
Actions (login required)