Research

Influence of fluid dynamics on heat transfer in a preswirl rotating-disk system


Reference:

Lock, G. D., Wilson, M. and Owen, J. M., 2005. Influence of fluid dynamics on heat transfer in a preswirl rotating-disk system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 127 (4), pp. 791-797.

Related documents:

This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below.

Official URL:

http://dx.doi.org/10.1115/1.1924721

Abstract

Modem gas turbines are cooled using air diverted from the compressor In a "direct transfer" preswirl system, this cooling air flows axially across the wheel space from stationary preswirl nozzles to receiver holes located in the rotating turbine disk. The distribution of the local Nusselt number Nu on the rotating disk is governed by three nondimensional fluid-dynamic parameters: preswirl ratio beta(p), rotational Reynolds number Reo, and turbulent flow parameter lambda(T). This paper describes heat transfer measurements obtained from a scaled model of a gas turbine rotor-stator cavity, where the flow structure is representative of that found in the engine. The experiments reveal that Nu on the rotating disk is axisymmetric except in the region of the receiver holes, where significant two-dimensional variations have been measured. At the higher coolant flow rates studied, there is a peak in heat transfer at the radius of the preswirl nozzles associated with the impinging jets from the preswirl nozzles. At lower coolant flow rates, the heat transfer is dominated by viscous effects. The Nusselt number is observed to increase as either Reo or XT increases.

Details

Item Type Articles
CreatorsLock, G. D., Wilson, M. and Owen, J. M.
DOI10.1115/1.1924721
DepartmentsFaculty of Engineering & Design > Mechanical Engineering
RefereedYes
StatusPublished
ID Code2046

Export

Actions (login required)

View Item