Research

Pulse-voltammetric glucose detection at gold junction electrodes


Reference:

Rassaei, L. and Marken, F., 2010. Pulse-voltammetric glucose detection at gold junction electrodes. Analytical Chemistry, 82 (17), pp. 7063-7067.

Related documents:

This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below. (Contact Author)

Official URL:

http://dx.doi.org/10.1021/ac101303s

Abstract

A novel glucose sensing concept based on the localized change or "modulation" in pH within a symmetric gold gold junction electrode is proposed. A paired gold gold junction electrode (average gap size ca. 500 nm) is prepared by simultaneous bipotentiostatic electrodeposition of gold onto two closely spaced platinum disk electrodes. For glucose detection in neutral aqueous solution, the potential of the "pH-modulator" electrode is set to -1.5 V vs saturated calomel reference electrode (SCE) to locally increase the pH, and simultaneously, either cyclic voltammetry or square wave voltammetry experiments are conducted at the sensor electrode. A considerable improvement in the sensor electrode response is observed when a normal pulse voltammetry sequence is applied to the modulator electrode (to generate "hydroxide pulses") and the glucose sensor electrode is operated with fixed bias at +0.5 V vs SCE (to eliminate capacitive charging currents). Preliminary data suggest good linearity for the glucose response in the medically relevant 1-10 mM concentration range (corresponding to 0.18-1.8 g L-1). Future electroanalytical applications of multidimensional pulse voltammetry in junction electrodes are discussed.

Details

Item Type Articles
CreatorsRassaei, L.and Marken, F.
DOI10.1021/ac101303s
DepartmentsFaculty of Science > Chemistry
RefereedYes
StatusPublished
ID Code20788

Export

Actions (login required)

View Item