Research

Dynamic measurement of heat flux through the cylinder wall of a modern HSDI engine over a new European drive cycle


Reference:

Lewis, A. G., Akehurst, S., Brace, C., Finol, C. and Robinson, K., 2010. Dynamic measurement of heat flux through the cylinder wall of a modern HSDI engine over a new European drive cycle. In: SAE 2010 World Congress & Exhibition, 2010-04-01, Detroit, MI.

Related documents:

This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below. (Contact Author)

Official URL:

http://dx.doi.org/10.4271/2010-01-0322

Abstract

A modern high speed four cylinder Diesel engine equipped with high pressure common rail fuel injection equipment has been fitted with extensive instrumentation to allow the heat flux and coolant convective heat transfer coefficient through the cylinder walls to be estimated. The instrumentation was located around the circumference of the cylinder and longitudinally down the cylinder. The engine has been run through the new European drive cycle using a dynamic test stand. From the experimental results it was found that there was a strong correlation between the one dimensional heat flux through the cylinder wall and the engine speed. The changes in heat flux were found to be repeatable over the four repeated ECE sections of the drive cycle. It was also found that the magnitude of heat flux reduced down the length of the cylinder.

Details

Item Type Conference or Workshop Items (Paper)
CreatorsLewis, A. G., Akehurst, S., Brace, C., Finol, C. and Robinson, K.
DOI10.4271/2010-01-0322
DepartmentsFaculty of Engineering & Design > Mechanical Engineering
RefereedYes
StatusPublished
ID Code26978

Export

Actions (login required)

View Item