Research

Experimental optimization of catalytic process in situ for heavy-oil and bitumen upgrading


Reference:

Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2011. Experimental optimization of catalytic process in situ for heavy-oil and bitumen upgrading. Journal of Canadian Petroleum Technology, 50 (11-12), pp. 33-47.

Related documents:

This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below. (Contact Author)

Official URL:

http://dx.doi.org/10.2118/136870-PA

Abstract

The worldwide conventional crude-oil demand is on the rise, and because of the rising prices, unconventional oils are becoming more economically attractive to extract and refine. However, technological innovation is needed if heavier oil supplies are to be exploited further. Toe-to-heel air injection (THAI) and its catalytic add-on processes (CAPRI) combine in-situ combustion with catalytic upgrading using an annular catalyst packed around the horizontal producer well. These techniques offer potentially higher recovery levels and lower environmental impact than alternative technologies (e.g., steam-based techniques). An experimental study is reported concerning the optimization of catalyst type and operating conditions for use in the THAI-CAPRI process. The feed oil was supplied from the Whitesands THAI-pilot trial. Experiments were carried out using microreactors containing 10 g of catalyst, with oil flow of 1 mL/min and gas flow of 0.5 L/min, under different temperatures, pressures, and gas environments. Catalysts tested included alumina-supported CoMo, NiMo, and ZnO/CuO. It was found that there was a trade-off in operation temperature between upgrading performance and catalyst lifetime. At a pressure of 20 bar, operation at 500C led to an average of 6.1API upgrading of THAI oil to 18.9API, but catalyst lifetime was limited to 1.5 hours. Operation at 420C was found to be a suitable compromise, with upgrading by an average of 1.6API, and sometimes up to 3API, with catalyst lifetime extended to 77.5 hours. Coke deposition occurred within the first few hours of the reaction, such that the catalyst pore space became blocked. However, upgrading continued, suggesting that thermal reactions or reactions catalysed by hydrogen transfer from the coke itself play a part in the upgrading reaction mechanism. The CAPRI process was relatively insensitive to changes in reaction-gas medium, gas-flow rate, and pressure, suggesting that the dissolution of hydrogen or methane from the gas phase does not play a key role in the upgrading reactions. By careful control of the temperature and oil-flow rate in the in-situ CAPRI process, additional upgrading compared with the THAI process alone may be effected, resulting in a more-valuable produced oil, which is easier to transport.

Details

Item Type Articles
CreatorsShah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M.
DOI10.2118/136870-PA
DepartmentsFaculty of Engineering & Design > Chemical Engineering
RefereedYes
StatusPublished
ID Code27784

Export

Actions (login required)

View Item