Measurements and calculations of transport AC loss in second generation high temperature superconducting pancake coils

Reference:

Yuan, W., Coombs, T. A., Kim, J. H., Kim, C. H., Kvitkovic, J. and Pamidi, S., 2011. Measurements and calculations of transport AC loss in second generation high temperature superconducting pancake coils. Journal of Applied Physics, 110 (11), 113906.

Related documents:

Preview

PDF (Yuan_JAP_2011_110_113906.pdf) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader Download (2389kB) | Preview

Official URL:

http://dx.doi.org/10.1063/1.3662174

Abstract

Theoretical and experimental AC loss data on a superconducting pancake coil wound using second generation (2 G) conductors are presented. An anisotropic critical state model is used to calculate critical current and the AC losses of a superconducting pancake coil. In the coil there are two regions, the critical state region and the subcritical region. The model assumes that in the subcritical region the flux lines are parallel to the tape wide face. AC losses of the superconducting pancake coil are calculated using this model. Both calorimetric and electrical techniques were used to measure AC losses in the coil. The calorimetric method is based on measuring the boil-off rate of liquid nitrogen. The electric method used a compensation circuit to eliminate the inductive component to measure the loss voltage of the coil. The experimental results are consistent with the theoretical calculations thus validating the anisotropic critical state model for loss estimations in the superconducting pancake coil.

Export

Actions (login required)