Optical guiding properties of high-brightness parabolic bow-tie laser arrays
Masanotti, D. and Causa, F., 2005. Optical guiding properties of high-brightness parabolic bow-tie laser arrays. IEEE Journal of Quantum Electronics, 41 (7), pp. 909-916.
Related documents:This repository does not currently have the full-text of this item.
You may be able to access a copy if URLs are provided below.
This paper presents the characteristics of parabolic bow-tie laser arrays (PBTLAs) which are a novel category of laser diodes specially designed to achieve high power with high brightness at 980 nm. Output powers in excess of 2.8 W/facet have been measured from five-element PBTLAs with output beam less than twice the diffraction limit, achieving high brightness of 275 MWcm/sup -2/srad/sup -1/ at 3 A (pulsed) injection current (=22 times the threshold). Changes in the achievable brightness due to changes in the optical cavity geometry and in the lateral optical guiding strength are discussed in detail, using the coupled-mode theory to interpret the experimental results. At threshold all devices operate in the highest (double lobed) array mode. At higher currents the arrays of tapered lasers change to quasi-in-phase operation when the modal gain of the fundamental array mode dominates because of the combined effect of carrier hole burning and spatial filtering from the narrow stripe central section of the device. Similar trends have been observed under continuous-wave operation. The reduction of lateral optical guiding strength is deleterious for the operational characteristics of PBTLAs and linear bow-tie arrays, and it leads to filamentation in gain-guided devices even at low currents. Theoretical results presented in this paper show that scalability is in principle possible; however, changes in the lateral gain profile due to hole-burning can significantly increase the modal gain of higher order modes and, therefore, strongly influence the optical output profile.
|Creators||Masanotti, D.and Causa, F.|
|Uncontrolled Keywords||optical output profile, high power, spatial filters, laser modes, optical hole burning, tapered lasers, lateral gain profile, brightness, linear bow-tie arrays, spatial filtering, fundamental array mode, optical cavity geometry, optical guiding, diffraction limit, coupled mode analysis, laser diodes, 980 nm, high-brightness laser arrays, 3 a, laser cavity resonators, gain-guided devices, quasiin-phase operation, waveguide lasers, continuous-wave operation, high power laser arrays, modal gain, semiconductor laser arrays, tapered geometry laser, parabolic bow-tie laser arrays, coupled mode theory, carrier hole burning, index- and gain-guiding|
|Departments||Faculty of Engineering & Design > Electronic & Electrical Engineering|
Actions (login required)