Research

Items from Research Centres & Institutes > Aerospace Engineering Research Centre

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Z
Number of items at this level: 554.

A

Abd Kadir, N. F., Rees, D. A. S. and Pop, I., 2008. Conjugate forced convection flow past a circular cylinder with internal heat generation which is embedded in a porous medium. International Journal of Numerical Methods in Heat and Fluid Flow, 18 (6), pp. 730-744.

Ahmad, S. and Rees, D. A. S., 2016. The effect of conducting sidewalls on the onset of convection in a porous cavity. Transport in Porous Media, 111 (2), pp. 287-304.

Akalanne, L. C. and MacGregor, S. A., 2008. CFD investigation of the flow over distorted and un-distorted cuboids. In: International Symposium on Advances in Computational Heat Transfer (ICHMT), 2008-05-11 - 2008-05-16.

Al-Battal, N., Cleaver, D. and Gursul, I., 2016. Aerodynamic Load Control through Blowing. In: AIAA SciTech 2016, 2016-01-04 - 2016-01-08, Manchester Grand Hyatt, San Diego, California.

Amerini, F., Barbieri, E., Meo, M. and Polimeno, U., 2009. Non Linear Vibration Method to Detect Imperfectly Contact Interfaces in Composite Beams. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31.

Amerini, F. and Meo, M., 2010. Structural health monitoring of bolted joints using linear and nonlinear acoustic methods. In: 5th European Workshop on Structural Health Monitoring, 2010-06-28 - 2010-07-02.

Amerini, F. and Meo, M., 2011. Structural health monitoring of bolted joints using linear and nonlinear acoustic/ultrasound methods. Structural Health Monitoring - An International Journal, 10 (6), pp. 659-672.

Amura, M., Meo, M. and Amerini, F., 2011. Baseline-free estimation of residual fatigue life using a third order acoustic nonlinear parameter. Journal of the Acoustical Society of America, 130 (4), pp. 1829-1837.

Amura, M. and Meo, M., 2012. Prediction of residual fatigue life using nonlinear ultrasound. Smart Materials and Structures, 21 (4), 045001.

Angioni, S., Visrolia, A. and Meo, M., 2010. A hierarchical multiscale plate model for the efficient simulation of composite laminates. In: 14th European Conference on Composite Materials, 2010-06-07 - 2010-06-10.

Angioni, S. L., Meo, M. and Foreman, A., 2011. A comparison of homogenization methods for 2-D woven composites. Composites Part B - Engineering, 42 (2), pp. 181-189.

Angioni, S. L., Meo, M. and Foreman, A., 2011. A critical review of homogenization methods for 2D woven composites. Journal of Reinforced Plastics and Composites, 30 (22), pp. 1895-1906.

B

Baker, N., Rhead, A. and Butler, R., 2008. Optimisation of aerospace laminates for damage tolerance. In: 7th ASMO UK/ISSMO Conference on Engineering Design Optimization, 2008-07-07 - 2008-07-08.

Baker, N., Butler, R. and York, C.B., 2011. Maximizing compression after impact strength of uncoupled symmetric and non-symmetric laminates. In: 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2011-04-03 - 2011-04-06. American Institute of Aeronautics and Astronautics.

Baker, N. and Butler, R., 2010. Compression after impact modeling of damage tolerant composite laminates. In: 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston, VA.: American Institute of Aeronautics and Astronautics.

Baker, N., Butler, R. and York, C. B., 2012. Damage tolerance of fully orthotropic laminates in compression. Composites Science and Technology, 72 (10), pp. 1083-1089.

Bannister, C., Brace, C., Lock, G., Taylor, J., Brooks, T. and Fraser, N., 2008. Experimental Characterisation of Heat Transfer in Exhaust Pipe Sections. In: SAE World Congress & Exhibition, 2008-04-01.

Bannister, C., Brace, C., Lock, G., Taylor, J., Brooks, T. and Fraser, N., 2009. Experimental characterisation of heat transfer in exhaust pipe sections. SAE International Journal of Materials & Manufacturing, 1 (1), pp. 136-144.

Barbieri, E., Petrinic, N., Meo, M. and Tagarielli, V. L., 2012. A new weight-function enrichment in meshless methods for multiple cracks in linear elasticity. International Journal for Numerical Methods in Engineering, 90 (2), pp. 177-195.

Barbieri, E. and Meo, M., 2009. A meshfree penalty-based approach to delamination in composites. Composites Science and Technology, 69 (13), pp. 2169-2177.

Barbieri, E. and Meo, M., 2009. Computation of the integrals in reproducing kernel methods. In: 10th U.S. National Congress of Computational Mechanics, 2009-07-16 - 2009-07-19.

Barbieri, E. and Meo, M., 2008. Delamination modelling using an element free galerkin approach. In: 13th European Conference on Composite Materials (ECCM13), 2008-06-02 - 2008-06-05.

Barbieri, E. and Meo, M., 2010. Discriminating linear from nonlinear elastic damage using a nonlinear time reversal DORT method. International Journal of Solids and Structures, 47 (20), pp. 2639-2652.

Barbieri, E. and Meo, M., 2009. Evaluation of the integral terms in reproducing kernel methods. Computer Methods in Applied Mechanics and Engineering, 198 (33-36), pp. 2485-2507.

Barbieri, E. and Meo, M., 2009. Meshless cohesive segments method for crack initiation and propagation in composites. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31.

Barletta, A., Celli, M. and Rees, D. A. S., 2009. The onset of convection in a porous layer induced by viscous dissipation: A linear stability analysis. International Journal of Heat and Mass Transfer, 52 (1-2), pp. 337-344.

Barletta, A. and Rees, D. A. S., 2012. Local thermal non-equilibrium effects in the Darcy-Benard instability with isoflux boundary conditions. International Journal of Heat and Mass Transfer, 55 (1-3), pp. 384-394.

Barletta, A. and Rees, D. A. S., 2009. Stability analysis of dual adiabatic flows in a horizontal porous layer. International Journal of Heat and Mass Transfer, 52 (9-10), pp. 2300-2310.

Barletta, A. and Rees, D. A. S., 2015. Local thermal non-equilibrium analysis of the thermoconvective instability in an inclined porous layer. International Journal of Heat and Mass Transfer, 83, pp. 327-336.

Barletta, A. and Rees, D. A. S., 2012. Linear instability of the Darcy–Hadley flow in an inclined porous layer. Physics of Fluids, 24 (7), 074104.

Bennett, G. J., Kennedy, J., Meskell, C., Carley, M., Jordan, P. and Rice, H., 2015. Aeroacoustics research in Europe:The CEAS-ASC report on 2013 highlights. Journal of Sound and Vibration, 340, pp. 39-60.

Betts, D., Bowen, C. R., Inman, D. J. and Kim, H. A., 2014. Novel model for arbitrary shape bistable piezoelectric-composite plates for vibration-based energy harvesting. In: Active and Passive Smart Structures and Integrated Systems VIII, part of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014-03-10.

Betts, D.N., Kim, H.A., Bowen, C.R. and Inman, D.J., 2012. Optimization of piezoelectric bistable composite plates for broadband vibrational energy harvesting. Proceedings of SPIE - The International Society for Optical Engineering, 8341, 83412Q.

Betts, D. N., Fong, Y. T. T., Salo, A., Bowen, C. R. and Kim, H. A., 2009. Characterization of the cured shapes of arbitrary layup composite laminates. In: 15th International Conference on Composite Structures, 2009-06-01 - 2009-06-05.

Betts, D. N. and Kim, H. A., 2008. Towards the optimization of the design of bi-stable composites. In: 7th ASMO-UK/ISSMO International Conference on Engineering Design Optimization, 2008-07-07 - 2008-07-08.

Betts, D. N., Kim, H. A. and Bowen, C. R., 2011. Modeling and optimization of bistable composite laminates for piezoelectric actuation. Journal of Intelligent Material Systems and Structures, 22 (18), pp. 2181-2191.

Betts, D. N., Kim, H. A., Bowen, C. R. and Inman, D. J., 2012. Optimal configurations of bistable piezo-composites for energy harvesting. Applied Physics Letters, 100 (11), 114104.

Betts, D. N., Bowen, C. R., Inman, D. J., Weaver, P. M. and Kim, H. A., 2014. Investigation of geometries of bistable piezoelectric-laminate plates for vibration-based energy harvesting. In: Liao, W.-H., ed. Proceedings of SPIE - The International Society for Optical Engineering.Vol. 9057. .

Betts, D. N., Guyer, R. A., Le Bas, P.-Y., Bowen, C. R., Inman, D. and Kim, H. A., 2014. Modelling the dynamic response of bistable composite plates for piezoelectric energy harvesting. In: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014, 2014-01-13 - 2014-01-17, National Harbor.

Boccardi, S., Calla, D. B., Malfense Fierro, G. P., Ciampa, F. and Meo, M., 2016. Nonlinear damage detection and localization using a time domain approach. In: Yu, T., Gyekenyesi, A. L., Shull, P. J. and Wu, H. F., eds. Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016, 2016-03-21 - 2016-03-24. SPIE. (Proceedings of SPIE; 9804)

Borowiec, M., Rysak, A., Betts, D. N., Bowen, C. R., Kim, H. A. and Litak, G., 2014. Complex response of a bistable laminated plate:Multiscale entropy analysis. European Physical Journal Plus, 129 (211), pp. 1-7.

Boston, R., Bell, A., Ting, V. P., Rhead, A. T., Nakayama, T., Faul, C. F. J. and Hall, S. R., 2015. Graphene oxide as a template for a complex functional oxide. CrystEngComm, 17 (32), pp. 6094-6097.

Bowen, C. R., Butler, R., Jervis, R., Kim, H. A. and Salo, A. I. T., 2007. Morphing and shape control using unsymmetrical composites. Journal of Intelligent Material Systems and Structures, 18 (1), pp. 89-98.

Bowen, C.R., Topolov, V.Y., Betts, D.N. and Kim, H.A., 2013. 2-2 composites based on [011]-poled relaxor-ferroelectric single crystals:from the piezoelectric anisotropy to the hydrostatic response. In: Schmid, U., Sanchez de Rojas Aldavero, J. L. and Leester-Schaedel, M., eds. Conference Smart Sensors, Actuators, and MEMS VI, 2013-04-24 - 2013-04-26. Bellingham, WA: SPIE - Society of Photo-Optical Instrumentation Engineers. (Proceedings of SPIE; 8763)

Bowen, C. R., Giddings, P., Salo, A. and Kim, H. A., 2011. Modeling and characterization of piezoelectrically actuated bistable composites. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 58 (9), pp. 1737-1750.

Brambles, O. J. and Rees, D. A. S., 2007. Curved free convection plume paths in porous media. Idojaras, 111 Apr-Sep (2-3), pp. 109-122.

Brampton, C. J., Kim, A. H. and Cunningham, J. L., 2012. Algorithm to maintain linear element in 3D level set topology optimization. In: ICPRAM 2012 - Proceedings of the 1st International Conference on Pattern Recognition Applications and Methods. , pp. 341-350.

Brampton, C. J. and Kim, H. A., 2013. Structural optimisation as a moving boundary problem using level set functions. In: Moitinho de Almeida, J. P., Diez, P., Tiago, C. and Pares, N., eds. 6th International Conference on Adaptive Modeling and Simulation, ADMOS 2013, 2013-06-03 - 2013-06-05. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE), pp. 131-137.

Brampton, C.J., Kim, H. A. and Cunningham, J.L., 2012. Level set topology optimisation of aircraft wing considering aerostructural interaction. In: 12th AIAA Aviation Technology, Integration and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2012-09-17 - 2012-09-19. American Institute of Aeronautics and Astronautics.

Brampton, C. J., Bowen, C. R., Buschhorn, S. T., Lee, J., Pickering, S. G., Wardle, B. L. and Kim, H. A., 2014. Actuation of bistable laminates by conductive polymer nanocomposites for use in thermal-mechanical aerosurface de-icing systems. In: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014, 2014-01-13 - 2014-01-17, National Harbor.

Brampton, C. J., Dunning, P. D. and Kim, H. A., 2015. Topology optimisation for stress using level set method. In: 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, 2015-01-05 - 2015-01-09. American Institute of Aeronautics and Astronautics Inc..

Brampton, C. J. and Kim, H. A., 2015. Level set based optimisation of steered fibre composites. In: 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, 2015-01-05 - 2015-01-09. American Institute of Aeronautics and Astronautics Inc..

Brampton, C. J., Kim, H. A. and Cunningham, J. L., 2012. Applications of 3D level set topology optimization. In: ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012, 2012-08-12 - 2012-08-12. Chicago, IL: ASME, pp. 875-882.

Brampton, C. J., Wu, K. C. and Kim, H. A., 2015. New optimization method for steered fiber composites using the level set method. Structural and Multidisciplinary Optimization, 52 (3), pp. 493-505.

Bringedal, C., Berre, I., Nordbotten, J. M. and Rees, D. A. S., 2011. Linear and nonlinear convection in porous media between coaxial cylinders. Physics of Fluids, 23 (9), 094109.

Browne, P. A., Budd, C., Gould, N. I. M., Kim, H. A. and Scott, J. A., 2012. A fast method for binary programming using first-order derivatives, with application to topology optimization with buckling constraints. International Journal for Numerical Methods in Engineering, 92 (12), pp. 1026-1043.

Bullock, K., Gould, V., Hejmadi, M. and Lock, G., 2009. Work placement experience: should I stay or Should I go? Higher Education Research and Development, 28 (5), pp. 481-494.

Butler, R., Almond, D. P., Hunt, G. W., Hu, B. and Gathercole, N., 2007. Compressive fatigue limit of impact damaged composite laminates. Composites Part A Applied Science and Manufacturing, 38 (4), pp. 1211-1215.

Butler, R. and Liu, W., 2008. Optimisation of stiffened panels using finite strip models. In: Falzon, B. G. and Aliabadi, M. H., eds. Buckling and postbuckling structures. London: Imperial College Press.

Butler, R., 2014. Buckling and compressive strength of laminates with optimized fibre-steering and layer-stacking for aerospace applications. In: Irving, P. and Soutis, C., eds. Polymer Composites in the Aerospace Industry. Oxford, U. K.: Elsevier, pp. 77-97. (Woodhead Publishing Series in Composites)

Butler, R., Baker, N. and Liu, W., 2009. Damage Tolerance of Buckling Optimized Variable Angle Tow Panels. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2009-05-04 - 2009-05-07.

Butler, R., Dodwell, T. J., Kim, T., Kynaston, S., Scheichl, R., Haftka, R. T. and Kim, N. H., 2015. Uncertainty quantification of composite structures with defects using multilevel monte carlo simulations. In: 17th AIAA Non-Deterministic Approaches Conference 2015, 2015-01-05 - 2015-01-09. American Institute of Aeronautics and Astronautics Inc..

Butler, R., Rhead, A. T., Liu, W. and Kontis, N., 2012. Compressive strength of delaminated aerospace composites. Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences, 370 (1965), pp. 1759-1779.

C

Calderon, D. E., Wang, Z. and Gursul, I., 2010. Lift enhancement of a rectangular wing undergoing a small amplitude plunging motion. In: 48th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2010-01-04. Reston, U. S. A.: American Institute of Aeronautics and Astronautics.

Calderon, D.E., Cleaver, D. J., Wang, Z. and Gursul, I., 2013. Wake structure of plunging finite wings. In: 43rd AIAA Fluid Dynamics Conference, 2013-06-24 - 2013-06-27.

Calderon, D. E., Wang, Z., Gursul, I. and Visbal, M.R., 2012. Volumetric measurements and simulations of the vortex structures generated by low aspect ratio plunging wings. In: 50th AIAA Aerospace Sciences Meeting, 2012-01-06 - 2012-01-09. Reston, Va.: American Institute of Aeronautics and Astronautics.

Calderon, D. E., Wang, Z. and Gursul, I., 2012. Three-dimensional measurements of vortex breakdown. Experiments in Fluids, 53 (1), pp. 293-299.

Calderon Robayo, D., Wang, Z. and Gursul, I., 2010. Effect of Wing Geometry on the Lift of a Plunging Finite Wing. In: 40th AIAA Fluid Dynamics Conference and Exhibit, 2010-06-28.

Calderon Robayo, D., Wang, Z. and Gursul, I., 2010. Lift enhancement of a rectangular wing undergoing a small amplitude plunging motion. In: 48th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2010-01-04.

Calderon Robayo, D., Wang, Z., Gursul, I. and Visbal, M. R., 2012. Volumetric measurements and simulations of the vortex structures generated by low aspect ratio plunging wings. In: 50th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2012-01-09 - 2012-01-12.

Capezzuto, F., Ciampa, F., Carotenuto, G., Meo, M., Milella, E. and Nicolais, F., 2010. A smart multifunctional polymer nanocomposites layer for the estimation of low-velocity impact damage in composite structures. Composite Structures, 92 (8), pp. 1913-1919.

Carley, M., 2007. Numerical Quadratures for Singular and Hypersingular Integrals in Boundary Element Methods. SIAM Journal on Scientific Computing, 29 (3), pp. 1207-1216.

Carley, M., 2010. Analysis of the radiated information in spinning sound fields. Journal of the Acoustical Society of America, 128 (4), pp. 1679-1684.

Carley, M., 2013. Analytical formulae for potential integrals on triangles. Journal of Applied Mechanics - Transactions of the ASME, 80 (4), 041008.

Carley, M., 2016. Fast evaluation of transient acoustic fields. Journal of the Acoustical Society of America, 139 (2), p. 630.

Carley, M., 2009. Inversion of spinning sound fields. Journal of the Acoustical Society of America, 125 (2), pp. 690-697.

Carley, M., 2009. Numerical quadratures for near-singular and near-hypersingular integrals in boundary element methods. Mathematical Proceedings of the Royal Irish Academy, 109 (1), pp. 49-60.

Carley, M., 2013. Numerical solution of the modified Bessel equation. IMA Journal of Numerical Analysis, 33 (3), pp. 1048-1062.

Carley, M., 2010. The near-field of spinning sources: Why source identification is hard. In: 159th Meeting of the Acoustical Society of America/NOISE-CON 2010, 2010-04-19 - 2010-04-23.

Carley, M., 2011. The radiating part of circular sources. Journal of the Acoustical Society of America, 129 (2), pp. 633-641.

Carley, M. and Angioni, S., 2017. Exact integration of surface and volume potentials. Journal of Engineering Mathematics, 104 (1), pp. 93-106.

Carley, M., Holt, N. and Walker, I., 2010. Noise mechanisms in motorcycle helmet noise. Proceedings of Meetings on Acoustics, 9, 040005.

Carley, M., Kennedy, J., Holt, N. and Walker, I., 2011. The sources and effects of noise exposure in motorcyling. Journal of the Acoustical Society of America, 129 (4), p. 2651.

Carley, M., Kennedy, J., Walker, I. and Holt, N., 2011. The experimental measurement of motorcycle noise. Proceedings of Meetings on Acoustics, 12, 040002.

Carley, M., Kennedy, J., Walker, I. and Holt, N., 2011. The experimental measurement of motorcycle noise. Journal of the Acoustical Society of America, 129 (4), p. 2651.

Carley, M. J., 2010. Moving least squares via orthogonal polynomials. SIAM Journal on Scientific Computing, 32 (3), pp. 1310-1322.

Carley, M. J., 2010. Series expansion for the sound field of a ring source. Journal of the Acoustical Society of America, 128 (6), pp. 3375-3380.

Carley, M. J., Holt, N. J. and Walker, I., 2010. Noise mechanisms in motorcycle helmet noise. Journal of the Acoustical Society of America, 127 (3), p. 1777.

Carley, M. J. and Martin, P. A., 2012. Jet noise: sound generation by disc and cylinder sources. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 468 (2148), pp. 3947-3964.

Carotenuto, G., Meo, M. and Milella, E., 2009. A new smart multifunctional polymer nanocomposites layer for the detection of low velocity impact damage in composite structures. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31.

Celli, M., Barletta, A. and Rees, D. A. S., 2009. Darcy boundary layer in forced convective regime using Local Thermal Non-Equilibrium model: analytical and numerical model. In: XXVII Congresso Nazionale UIT sulla Trasmissione del Calore, 2009-06-22 - 2009-06-24.

Celli, M., Rees, D. A. S. and Barletta, A., 2010. The effect of local thermal non-equilibrium on forced convection boundary layer flow from a heated surface in porous media. International Journal of Heat and Mass Transfer, 53 (17-18), pp. 3533-3539.

Chauncey Wu, K., Stanford, B.K., Hrinda, G.A., Wang, Z., Martin, R.A. and Kim, H. A., 2013. Structural assessment of advanced composite tow-steered shells. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2013-04-08 - 2013-04-11. American Institute of Aeronautics and Astronautics.

Cho, G. H., Sangan, C. M., Owen, J. M. and Lock, G. D., 2016. Effect of ingress on turbine disks. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 138 (4), 042502.

Cho, G. H., Tang, H., Owen, J. M. and Lock, G. D., 2016. On the measurement and analysis of data from transient heat transfer experiments. International Journal of Heat and Mass Transfer, 98, pp. 268-276.

Cho, G., Sangan, C. M., Owen, J. M. and Lock, G. D., 2015. Effect of ingress on turbine discs. Montreal, Canada: ASME, V05CT15A004.

Ciampa, F. and Meo, M., 2014. Impact localization on a composite tail rotor blade using an inverse filtering approach. Journal of Intelligent Material Systems and Structures, 25 (15), pp. 1950-1958.

Ciampa, F., Meo, M. and Barbieri, E., 2012. Impact localization in composite structures of arbitrary cross section. Structural Health Monitoring - An International Journal, 11 (6), pp. 643-655.

Ciampa, F., Onder, E., Barbieri, E. and Meo, M., 2014. Detection and Modelling of Nonlinear Elastic Response in Damaged Composite Structures. Journal of Nondestructive Evaluation, 33 (4), pp. 515-521.

Ciampa, F., Angioni, S., Pinto, F., Scarselli, G., Almond, D. and Meo, M., 2015. Modelling of Thermal Wave Propagation in Damaged Composites with Internal Source. Proceedings of SPIE - The International Society for Optical Engineering, 9437.

Ciampa, F., Barbieri, E. and Meo, M., 2014. Modelling of multiscale nonlinear interaction of elastic waves with three-dimensional cracks. The Journal of the Acoustical Society of America, 135 (6), pp. 3209-3220.

Ciampa, F., Boccardi, S. and Meo, M., 2016. Factors affecting the imaging of the impact location with inverse filtering and diffuse wave fields. Journal of Intelligent Material Systems and Structures, 27 (11), pp. 1523-1533.

Ciampa, F. and Meo, M., 2010. A new wavelet based algorithm for impact identificationand group velocity determination in composite structures. In: 5th European Workshop on Structural Health Monitoring, 2010-06-28 - 2010-07-02.

Ciampa, F. and Meo, M., 2011. Acoustic emission localization in a composite stiffened panel using a time reversal algorithm. In: Composite Science and Technology.Vol. 471-472. Zurich-Durnten: Trans Tech Publications, pp. 910-915. (Key Engineering Materials)

Ciampa, F. and Meo, M., 2011. Acoustic emission source localization in anisotropic structures with diffuse field conditions using a time reversal approach. Proceedings of SPIE - The International Society for Optical Engineering, 7984, 798416.

Ciampa, F. and Meo, M., 2012. Imaging non-classical elastic nonlinearities using reciprocal time reversal and phase symmetry analysis. Proceedings of SPIE - The International Society for Optical Engineering, 8348, 83480P.

Ciampa, F. and Meo, M., 2012. Impact detection in anisotropic materials using a time reversal approach. Structural Health Monitoring - An International Journal, 11 (1), pp. 43-49.

Ciampa, F. and Meo, M., 2013. Impact detection on a helicopter composite rotor blade. In: 9th International Conference on Composite Science And Technology, 2013-04-24 - 2013-04-26.

Ciampa, F. and Meo, M., 2012. Nonlinear elastic imaging using reciprocal time reversal and third order symmetry analysis. Journal of the Acoustical Society of America, 131 (6), pp. 4316-4323.

Ciampa, F., Pickering, S., Scarselli, G. and Meo, M., 2014. Nonlinear damage detection in composite structures using bispectral analysis. In: Proceedings of SPIE - The International Society for Optical Engineering.Vol. 9064. .

Ciampa, F., Scarselli, G., Pickering, S., Meo, M. and Gianpiccolo, A., 2014. Nonlinear Elastic Tomography using sparse array measurements. In: 7th European Workshop on Structural Health Monitoring. .

Ciampa, F., Scarselli, G., Ginzburg, D. and Meo, M., 2015. Non-destructive testing techniques based on nonlinear methods for assessment of debonding in single lap joints. Proceedings of SPIE - The International Society for Optical Engineering

Cleaver, D. J., Calderon, D.E., Wang, Z. and Gursul, I., 2013. Low aspect ratio oscillating flexible wings at low Reynolds numbers. In: 43rd AIAA Fluid Dynamics Conference, 2013-06-24 - 2013-06-27.

Cleaver, D., 2011. Low Reynolds number flow control through small-amplitude high-frequency motion. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Cleaver, D., Calderon, D.E., Wang, Z. and Gursul, I., 2016. Lift enhancement through flexibility of plunging wings at low Reynolds numbers. Journal of Fluids and Structures, 64, pp. 27-45.

Cleaver, D., Calderon Robayo, D., Wang, Z. and Gursul, I., 2012. Rigid and Flexible Foils Oscillating Near a Free Surface. In: 50th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2012-01-09 - 2012-01-12.

Cleaver, D., Wang, Z. and Gursul, I., 2009. Delay of stall by small amplitude airfoil oscillation at low reynolds numbers. In: 47th AIAA Aerospace Sciences Meeting, 2009-01-05 - 2009-01-08.

Cleaver, D., Wang, Z. and Gursul, I., 2012. Effect of airfoil shape on flow control by small-amplitude oscillations. In: 50th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2012-01-09 - 2012-01-12.

Cleaver, D., Wang, Z. and Gursul, I., 2009. Lift enhancement on oscillating airfoils. In: 39th AIAA Fluid Dynamics Conference, 2009-06-22 - 2009-06-25.

Cleaver, D., Wang, Z. and Gursul, I., 2013. Oscillating flexible wings at low Reynolds numbers. In: 51st AIAA Aerospace Sciences Meeting, 2013-01-07 - 2013-01-10.

Cleaver, D. J., Wang, Z. and Gursul, I., 2010. Vortex mode bifurcation and lift force of a plunging airfoil at low reynolds numbers. In: 48th AIAA Aerospace Sciences Meeting, 2010-01-07 - 2010-01-10.

Crick, T., Dunning, P., Kim, H. A. and Padget, J., 2009. Engineering design optimization using services and workflows. Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences, 367 (1898), pp. 2741-2751.

Crick, T., Dunning, P., Kim, H. A. and Padget, J., 2008. Structural optimization using services and workflows. In: UK e-Science All Hands Meeting: Crossing Boundaries, 2008-09-08 - 2008-09-11.

Cunningham, J. L., Clement, P. J. and Kim, H. A., 2007. Cancellous bone architecture as a structural optimum. In: 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, 2007-03-01.

D

Dang, T. D., Hallet, S. R., Kim, B. C., Cahain, Y. L., Butler, R. and Liu, W., 2015. Modelling of as manufactured geometry for prediction of impact and compression after impact behaviour of variable angle tow laminates. Journal of Composite Materials, 49 (12), pp. 1423-1438.

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Polimeno, U., 2011. Impact damage detection in a stiffened composite wing panel using digital shearography and thermosonics. In: Composite Science and Technology.Vol. 471-472. Zurich-Durnten: Trans Tech Publications, pp. 904-909. (Key Engineering Materials)

De Simone, M. E., Boccardi, S., Ciampa, F. and Meo, M., 2016. A linearized impact localization algorithm for the health monitoring of aerospace components. In: 8th European Workshop on Structural Health Monitoring, EWSHM 2016, 2016-07-05 - 2016-07-08. NDT.net, pp. 1773-1782.

Dodwell, T., Butler, R. and Hunt, G. W., 2012. A variational model for the wrinkling of carbon fiber composites during consolidation. In: 10th World Conference on Computational Mechanics, 2012-07-08 - 2012-07-13.

Dolce, F., Meo, M., Wright, A. and French, M., 2009. Structural response of laminated composite plates to blast load. In: ICCM-17 - 17th International Conference on Composite Materials. 2009. Piscataway, U. S. A.: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Dolce, F., Meo, M., Wright, A., French, M. and Bernabei, M., 2011. Hybrid S2/Carbon epoxy composite armours under blast loads. Applied Composite Materials, 19 (3-4), pp. 349-362.

Dolce, F., Meo, M., Wright, A., French, M. and Bernabei, M., 2010. Structural response of laminated composite plates to blast load. Plastics, Rubber and Composites: Macromolecular Engineering, 39 (3-5), pp. 180-188.

Dolce, F. and Meo, M., 2010. Structural response of laminated composite plates to blast load. In: 2010 Enginsoft International Conference, 2010-10-21 - 2010-10-22.

Dolce, F., Meo, M., Wright, A. and French, M., 2009. Structural response of laminated composite plates to blast load. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31.

Dolce, F., Meo, M., Wright, A., French, M. and Bernabei, M., 2009. Glass/epoxy composite armours under blast loads. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22.

Duan, K., Padget, J., Kim, H.A. and Hosobe, H., 2012. Composition of engineering web services with universal distributed data-flows framework based on ROA. In: Alarcon, R., Pautasso, C. and Wilde, E., eds. Third International Workshop on RESTful Design (WS-REST 2012) at WWW2012, 2012-04-16. New York, U. S. A.: Association for Computing Machinery (ACM), pp. 41-48.

Dunning, P.D. and Kim, H. A., 2010. A new hole insertion method for level set based topology optimization. In: 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, 2010-09-13 - 2010-09-15. American Institute of Aeronautics and Astronautics.

Dunning, P.D. and Kim, H. A., 2013. A new hole insertion method for level set based structural topology optimization. International Journal for Numerical Methods in Engineering, 93 (1), pp. 118-134.

Dunning, P., Kim, H. A. and Mullineux, G., 2008. Error analysis of fixed grid formulation for boundary based structural optimisation. In: 7th ASMO UK / ISSMO conference on Engineering Design Optimization, 2008-07-07 - 2008-07-08.

Dunning, P., Kim, H. A. and Mullineux, G., 2010. Introducing Loading Direction Uncertainty in Topology Optimization. In: 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2010-04-12 - 2010-04-15.

Dunning, P., Kim, H. A. and Mullineux, G., 2009. Introducing Loading Uncertainty in Topology Optimization. In: PLATO-N International Workshop: Advances in Topology and Material Optimization - Methods and Industrial Applications, 2009-09-01.

Dunning, P., Kim, H. A. and Mullineux, G., 2010. Loading Magnitude Uncertainty in Level-Set Based Topology Optimization. In: 12th AIAA non-Deterministic Approaches Conference, 2010-04-12 - 2010-04-15.

Dunning, P., Kim, H. A. and Mullineux, G., 2008. Two-dimensional fixed grid based finite element structural analysis. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2008-09-10 - 2008-09-12.

Dunning, P. D., Kim, H. A. and Mullineux, G., 2009. Introducing isoparametric fixed grid analysis for boundary based topology optimization. In: 10th US National Congress on Computational Mechanics, 2009-07-16 - 2009-07-19.

Dunning, P. D. and Kim, H.A., 2015. Introducing the sequential linear programming level-set method for topology optimization. Structural and Multidisciplinary Optimization, 51 (3), pp. 631-643.

Dunning, P. D., Stanford, B. K. and Kim, H. A., 2015. Coupled aerostructural topology optimization using a level set method for 3D aircraft wings. Structural and Multidisciplinary Optimization, 51 (5), pp. 1113-1132.

Dunning, P. D., Stanford, B. K. and Kim, H. A., 2015. Level-set topology optimization with aeroelastic constraints. In: 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, 2015-01-05 - 2015-01-09. American Institute of Aeronautics and Astronautics Inc..

Dunning, P. D., Stanford, B. K., Kim, H. A. and Jutte, C. V., 2014. Aeroelastic tailoring of a plate wing with functionally graded materials. Journal of Fluids and Structures, 51, pp. 292-312.

Dunning, P. D., Stanford, B. K. and Kim, H. A., 2014. Aerostructural level set topology optimization for a common research model wing. In: 10th AIAA Multidisciplinary Design Optimization Specialist Conference, 2014, 2014-01-13 - 2014-01-17, National Harbor.

Dunning, P. D., Stanford, B. K., Kim, H. A. and Jutte, C., 2014. Aeroelastic tailoring of a plate wing with functionally graded materials. In: 55th AIAA/ASME/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014. Reston, U. S. A.: American Institute of Aeronautics and Astronautics.

Duro, J. A., Padget, J. A., Bowen, C. R., Kim, H. A. and Nassehi, A., 2016. Multi-sensor data fusion framework for CNC machining monitoring. Journal of Mechanical Systems and Signal Processing, 66-67, pp. 505-520.

de Vahl Davis, G. and Rees, D. A. S., 2012. Preface:Fifth international symposium on computational heat transfer keynote lectures. Computational Thermal Sciences, 4 (6).

E

Edwards, C. S., Kim, H. A. and Budd, C. J., 2007. Smooth Boundary Based Optimisation Using Fixed Grid. In: 7th World Congress on Structural and Multidisciplinary Optimization, 2007-05-01.

Edwards, C. S., Kim, H. A. and Budd, C. J., 2007. An evaluative study on ESO and SIMP for optimising a cantilever tie-beam. Structural and Multidisciplinary Optimization, 34 (5), pp. 403-414.

Erland, S., Dodwell, T. J. and Butler, R., 2015. Characterisation of inter-ply shear in uncured carbon fibre prepreg. Composites Part A - Applied Science and Manufacturing, 77, pp. 210-218.

Erland, S., Dodwell, T. J. and Butler, R., 2014. Inter and intra-ply shearing of uncured carbon fibre laminates. In: 16th European Conference on Composite Materials, ECCM 2014, 2014-06-22 - 2014-06-26. European Conference on Composite Materials, ECCM.

F

Fletcher, T. A., Butler, R. and Dodwell, T. J., 2015. Anti-symmetric laminates for improved consolidation and reduced warp of tapered C-sections. Advanced Manufacturing: Polymer and Composites Science, 1 (2), pp. 105-111.

Fletcher, T. A., Butler, R., Dodwell, T. J. and Erland, S., 2014. Non-symmetric stacking sequences to aid manufacture. In: 16th European Conference on Composite Materials, ECCM 2014, 2014-06-22 - 2014-06-26. European Conference on Composite Materials, ECCM.

G

Genc, G. and Rees, D. A. S., 2011. The onset of convection in horizontally partitioned porous layers. Physics of Fluids, 23 (6), 064107.

Genc, M. S., Kaynak, U. and Lock, G. D., 2009. Flow over an aerofoil without and with a leading-edge slat at a transitional Reynolds number. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 223 (G3), pp. 217-231.

Genc, M. S., Lock, G. and Kaynak, U., 2008. An Experimental and Computational of Low Re Number Transitional Flows over an Aerofoil with Leading Edge Slat. In: 8th AIAA Aviation, Technology and Operation Conference, 2008-09-14 - 2008-09-19.

Genc, M. S., Lock, G. and Kaynak, U., 2008. An experimental and computational study of low Re number transitional flows over an aerofoil with leading edge slat. In: 8th AIAA Aviation Technology, Integration and Operations (ATIO) Conference, September 14, 2008 - September 19, 2008, 2008-09-14 - 2008-09-19.

Ghorbaniasl, G., Carley, M. and Lacor, C., 2013. Acoustic velocity formulation for sources in arbitrary motion. AIAA Journal, 51 (3), pp. 632-642.

Ghorbaniasl, G., Carley, M. and Lacor, C., 2016. Reply by the authors to S. Lee and K. Brentner. AIAA Journal, 54 (5), pp. 1811-1812.

Giddings, P., Bowen, C. R., Butler, R. and Kim, H. A., 2008. Characterisation of actuation properties of piezoelectric bi-stable carbon-fibre laminates. Composites Part A Applied Science and Manufacturing, 39 (4), pp. 697-703.

Giddings, P., Bowen, C. and Kim, H. A., 2009. A coupled field finite element model to predict actuation properties of piezoelectrically actuated bistable composites. In: 17th International Conference on Composite Materials, ICCM-17, 2009-07-27 - 2009-07-31.

Giddings, P., Bowen, C. and Kim, H. A., 2008. Characterisation of force-deflection behaviour of piezoelectrically actuated bistable composite laminate under two-axis constraint. In: 3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008, 2008-06-08 - 2008-06-13.

Giddings, P. F., Kim, H. A. and Bowen, C. R., 2009. Piezoelectrically actuated bistable composites: a finite element model to predict cured shape and actuation properties. In: 17th Annual International Conference on Composites/Nano Engineering, 2009-07-26 - 2009-08-01.

Gonzalez, C. M., Fagan, M., Ansell, M. P. and Meo, M., 2007. Experimental and finite element studies of adhesively bonded lap joints for natural fibre composites. In: 6th International Conference on Composite Materials (ICCM-16), 2007-07-01.

Gordnier, R. E., Visbal, M. R., Gursul, I. and Wang, Z., 2007. Computational and Experimental Investigation of a Nonslender Delta Wing. In: 45th AIAA Aerospace Sciences Meeting and Exhibit, 2007-01-01.

Gordnier, R. E., Visbal, M. R., Gursul, I. and Wang, Z., 2009. Computational and experimental investigation of a nonslender delta wing. AIAA Journal, 47 (8), pp. 1811-1825.

Gresham, N. T., Wang, Z. J. and Gursul, I., 2008. Vortex Dynamics of Delta Wings Undergoing Self-Excited Roll Oscillations. In: 38th AIAA Fluid Dynamics Conference and Exhibit, 2008-06-23 - 2008-06-26.

Gresham, N., Wang, Z. and Gursul, I., 2009. Aerodynamics of Free-to-Roll Low Aspect Ratio Wings. In: 47th AIAA Aerospace Sciences Meeting, 2009-01-05 - 2009-01-08.

Gresham, N. T., Wang, Z. and Gursul, I., 2011. Effect of slenderness ratio on free-to-roll wing aerodynamics. AIAA Journal of Aircraft, 48 (3), pp. 1112-1116.

Guida, M., Grimaldi, A., Marulo, M., Meo, M. and Olivares, G., 2009. Bird impact simulation on fiber metal laminate sandwich leading edge using a coupled FE/SPH approach. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31.

Guida, M., Marulo, F., Meo, M., Grimaldi, A. and Olivares, G., 2011. SPH - Lagrangian study of bird impact on leading edge wing. Composite Structures, 93 (3), pp. 1060-1071.

Guida, M., Marulo, F., Meo, M. and Riccio, M., 2009. Transient three dimensional finite element analysis of a bird strike on a sandwich fin leading edge. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22.

Guida, M., Marulo, F., Meo, M. and Russo, S., 2012. Experimental tests analysis of fiber metal laminate under birdstrike. Mechanics of Advanced Materials and Structures, 19 (5), pp. 376-395.

Guida, M., Marulo, F., Polito, T., Meo, M. and Riccio, M., 2009. Design and testing of a fiber-metal-laminate bird-strike-resistant leading edge. AIAA Journal of Aircraft, 46 (6), pp. 2121-2129.

Guida, M., Marulo, M., Meo, M. and Riccio, M., 2008. Evaluation and validation of multi-physics FE methods to simulate bird strike on a wing leading edge. In: 13th European Conference on Composite Materials (ECCM13), 2008-06-02 - 2008-06-05.

Guida, M., Meo, M., Riccio, M. and Marulo, F., 2008. Analysis of bird impact on a composite tailplane leading edge. Applied Composite Materials, 15 (4-6), pp. 241-257.

Guo, Y., Owen, G., Liu, W., Maropoulos, P. and Mileham, A., 2008. Application of Particle Swarm Optimisation Approach to Integrate Process Planning and Scheduling. In: Proceedings of 5th International Conference on Digital Enterprise Technology, 2008-10-22 - 2008-10-24.

Gursul, I., 2007. Self-Excited Roll Oscillations of Nonslender Wings. In: AFOSR Contractors Meeting, 2007-08-01.

Gursul, I., 2007. Vortex Flows of Unmanned Air Vehicles. In: AIAC-2007-003, Ankara International Aerospace Conference, 2007-09-10 - 2007-09-12.

Gursul, I., Vardaki, E., Margaris, P. and Wang, Z., 2007. Control of wing vortices. In: King, R., ed. Active flow control. Berlin, Germany: Springer, pp. 137-151. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; 95)

Gursul, I., Wang, Z. and Vardaki, E., 2007. Review of flow control mechanisms of leading-edge vortices. Progress in Aerospace Sciences, 43 (7-8), pp. 246-270.

Gursul, I., 2000. A proposed mechanism for the time lag of vortex breakdown location in unsteady flows. In: 38th Aerospace Sciences Meeting and Exhibit, 2000, 2000-01-10 - 2000-01-13.

Gursul, I., 2008. Fluid-Structure Interaction Research at the University of Bath. In: AFOSR Workshop on Aeroelasticity, Unsteady Aerodynamics, and Fluid-Structure Interaction, 2008-02-11 - 2008-02-12.

Gursul, I., Vardaki, E., Margarris, P. and Wang, Z., 2006. Control of wing vortices. In: Conference on Active Flow Control, 2006-09-01.

Gursul, I. and Wang, Z., 2010. High angle of attack aerodynamics. In: Blockley, R. and Shyy, W., eds. Encyclopedia of Aerospace Engineering. Wiley.

Guyer, R. A., Kim, H. A., Derome, D., Carmeliet, J. and TenCate, J., 2011. Hysteresis in modeling of poroelastic systems: quasistatic equilibrium. Physical Review E, 83 (6), 061408.

Guyer, R. A. and Kim, H. A., 2015. Theoretical model for fluid-solid coupling in porous materials. Physical Review E, 91, 042406.

Guyer, R. A. and Kim, H. A., 2015. Theoretical modeling of fluid-solid coupling in porous materials. In: Nonlinear Elasticity and Hysteresis. Chichester, U. K.: Wiley-Blackwell, pp. 57-80.

H

Harris, P., Bowen, C. and Kim, H. A., 2014. Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetrie bistable laminates. In: 29th Annual American Society for Composites Technical Conference, 2014-09-08 - 2014-09-10.

Heathcote, D., Al-Battal, N., Gursul, I. and Cleaver, D., 2015. Control of Wing Loads by Means of Blowing and Mini-Tabs. In: European Drag Reduction and Flow Control Meeting, 2015-03-23 - 2015-03-25, Sidney Sussex College, Cambridge.

Heathcote, D., Gursul, I. and Cleaver, D., 2016. An Experimental Study of Mini-Tabs for Aerodynamic Load Control. In: AIAA SciTech 2016, 2016-01-04 - 2016-01-08, Manchester Grand Hyatt, San Diego, California.

Heathcote, S. and Gursul, I., 2007. Flexible flapping airfoil propulsion at low reynolds numbers. AIAA Journal, 45 (5), pp. 1066-1079.

Heathcote, S. and Gursul, I., 2007. Jet switching phenomenon for a periodically plunging airfoil. Physics of Fluids, 19 (2), 027104.

Heathcote, S., Wang, Z. and Gursul, I., 2008. Effect of spanwise flexibility on flapping wing propulsion. Journal of Fluids and Structures, 24 (2), pp. 183-199.

Hejmadi, M.V., Bullock, K., Gould, V. and Lock, G.D., 2012. Is choosing to go on placement a gamble? Perspectives from bioscience undergraduates. Assessment and Evaluation in Higher Education, 37 (5), pp. 605-618.

Holt, N., Walker, I., Kennedy, J. and Carley, M., 2011. Motorcycle helmets and the frequency dependence of temporary hearing threshold shift. Proceedings of Meetings on Acoustics, 12, 050001.

Holt, N., Walker, I., Kennedy, J. and Carley, M., 2011. Motorcycle helmets and the frequency dependence of temporary hearing threshold shift. Journal of the Acoustical Society of America, 129 (4), p. 2654.

Hu, T., Wang, Z. and Gursul, I., 2014. Passive control of self-induced roll oscillations using bleed. In: 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, 2014-01-13 - 2014-01-17, Maryland.

Hu, T., Wang, Z. and Gursul, I., 2011. Control of Self-Excited Roll Oscillations of Low-Aspect-Ratio Wings Using Acoustic Excitation. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, January 4, 2011 - January 7, 2011, 2011-01-01.

Hu, T., Wang, Z., Gursul, I. and Bowen, C., 2013. Active control of self-induced roll oscillations of a wing using synthetic jet. International Journal of Flow Control, 5 (3-4), pp. 201-214.

Huang, G. Q., Fang, M. J., Lu, H., Dai, Q. Y., Liu, W. and Newman, S., 2009. RFID-Enabled Real-Time Mass-Customized Production Planning and Scheduling. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2009-07-06 - 2009-07-08.

Hunt, G., Butler, R. and Budd, C., 2012. Geometry and mechanics of layered structures and materials. Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences, 370 (1965), pp. 1723-1729.

Hunt, V., Charney, K. and Lock, G., 2008. Thermal imaging establishes behavioural fever in the desert locust, Schistocerca gregaria during mycosis. In: 23rd International Congress on Entomology, 2008-07-06 - 2008-07-12.

I

Iemma, U., Carley, M. and Pellegrini, R., 2014. Tailoring acoustic metamaterials to aeroacoustic applications. In: 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control, INTERNOISE 2014, 2014-11-16 - 2014-11-19. Australian Acoustical Society.

Iervolino, O., Jenks, C.H. and Meo, M., 2014. Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM. In: Proceedings of SPIE - The International Society for Optical Engineering.Vol. 9063. .

J

Jackson, R., Wang, Z. and Gursul, I., 2015. Control of afterbody vortices by blowing. In: AIAA Aviation Forum 2015, 2015-06-22 - 2015-06-26, Hilton Anatole.

Jamalud-Din, S. -D., Rees, D. A. S., Reddy, B. V. K. and Narasimhan, A., 2010. Prediction of natural convection flow using a network model and numerical simulations inside an enclosure with distributed solid blocks. Heat and Mass Transfer, 46 (3), pp. 333-343.

Javiya, U., Chew, J., Hills, N., Zhou, L., Wilson, M. and Lock, G., 2010. CFD analysis of flow and heat transfer in a direct transfer pre-swirl system. In: ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010.Vol. 4. New York: American Society of Mechanical Engineers, pp. 1167-1178. (Proceedings of the ASME Turbo Expo)

Javiya, U., Chew, J. W., Hills, N. J., Zhou, L., Wilson, M. and Lock, G. D., 2012. CFD analysis of flow and heat transfer in a direct transfer preswirl system. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031017.

Jones, R., Cleaver, D. and Gursul, I., 2015. Fluid-structure interactions for flexible and rigid tandem-wings at low Reynolds numbers. In: 53rd AIAA Aerospace Sciences Meeting (AIAA SciTech 2015), 2015-01-05. American Institute of Aeronautics and Astronautics.

K

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Accurate heat transfer measurements using thermochromic liquid crystal, Part 2:application to a rotating disc. International Journal of Heat and Fluid Flow, 30 (5), pp. 950-959.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Accurate heat transfer measurements using thermochromic liquid crystal. Part 1: calibration and characteristics of crystals. International Journal of Heat and Fluid Flow, 30 (5), pp. 939-949.

Kakade, V., Lock, G., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Effect of Location of Nozzles on Heat Transfer in pre-Swirl Cooling Systems. In: 54th International Gas Turbine and Aerospace Congress, 2009-06-01.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Effect of radial location of nozzles on heat transfer in pre-swirl cooling systems. In: Proceedings of the ASME Turbo Expo 2009.Vol. 3. ASME, pp. 1051-1060.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2011. Effect of radial location of nozzles on heat transfer in preswirl cooling systems. Journal of Turbomachinery: Transactions of the ASME, 133 (2), 021023.

Karnahl, J., Von Wolfersdorf, J., Tham, K. M., Wilson, M. and Lock, G., 2012. Computational fluid dynamics simulations of flow and heat transfer in a preswirl system: influence of rotating-stationary domain interface. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 134 (5), 052502.

Karnahl, J., von Wolfersdorf, J., Tham, K. M., Wilson, M. and Lock, G., 2011. CFD simulations of flow and heat transfer in a pre-swirl system: influence of rotating-stationary domain interface. In: Proceedings of the ASME Turbo Expo 2011. ASME.

Kennedy, J., Adetifa, O., Carley, M., Holt, N. and Walker, I., 2011. Aeroacoustic sources of motorcycle helmet noise. The Journal of the Acoustical Society of America, 130 (3), pp. 1164-1172.

Kennedy, J., Carley, M., Walker, I. and Holt, N., 2013. On-road and wind-tunnel measurement of motorcycle helmet noise. The Journal of the Acoustical Society of America, 134 (3), pp. 2004-2010.

Kennedy, J., Holt, N., Carley, M. and Walker, I., 2014. The influence of the acoustic properties of motorcycle helmets on temporary hearing loss in motorcyclists. Acta Acustica United with Acustica, 100 (6), pp. 1129-1138.

Kennedy, J., Carley, M., Holt, N. and Walker, I., 2011. The effects of windscreen flow on noise in motorcycle helmets. Journal of the Acoustical Society of America, 129 (4), p. 2652.

Kennedy, J., Carley, M., Holt, N. and Walker, I., 2011. The effects of windscreen flow on noise in motorcycle helmets. In: 161st Acoustical Society of America Meeting, 2011-05-23 - 2011-05-27.

Kennedy, J., Holt, N., Carley, M. and Walker, I., 2011. Spectral filtering characteristics of a motorcycle helmet. Journal of the Acoustical Society of America, 129 (4), p. 2652.

Kim, H. A., Clement, P. J. and Cunningham, J. L., 2008. Investigation of cancellous bone architecture using structural optimisation. Journal of Biomechanics, 41 (3), pp. 629-635.

Kim, H. A., Featherston, C. A., Ussel, J. and Williams, P. A., 2008. Introducing a discrete modelling technique for buckling of panels under combined loading. Structural and Multidisciplinary Optimization, 36 (1), pp. 3-13.

Kim, H. A. and Guyer, R.A., 2013. Robust topology optimisation with generalised probability distribution of loading. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2013-04-08 - 2013-04-11.

Kim, H. A., Howard, G. J. and Cunningham, J. L., 2009. Do trabeculae of femoral head represent a structural optimum? In: Lim, C. T. and Goh, G. T. C., eds. 13th International Conference on Biomedical Engineering.Vol. 23. Springer, pp. 1636-1639. (IFMBE Proceedings)

Kim, H. A., Kennedy, D. and Gurdal, Z., 2008. Optimization of aerospace structures. Structural and Multidisciplinary Optimization, 36 (1), pp. 1-2.

Kim, H. A., Betts, D. N., Salo, A. I. T. and Bowen, C. R., 2009. Shape memory alloy actuation for asymmetric bistable composites. In: 17th Annual International Conference on Composites/Nano Engineering, 2009-07-26 - 2009-08-01.

Kinawy, M. and Butler, R., 2009. Face Damage Growth of Sandwich Composites under Compressive Fatigue Loading. In: 17th International Conference on Composite Materials, ICCM-17, 2009-07-27 - 2009-07-31.

Kinawy, M., Butler, R. and Hunt, G. W., 2012. Bending strength of delaminated aerospace composites. Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences, 370 (1965), pp. 1780-1797.

Kinawy, M., Butler, R. and Hunt, G. W., 2010. Buckling and propagation of a delaminated composite beam in bending. In: AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2010: Collection of Technical Papers. American Institute of Aeronautics and Astronautics.

King, M. P., Wilson, M. and Owen, J. M., 2007. Rayleigh-Benard convection in open and closed rotating cavities. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 129 (2), pp. 305-311.

Krishnababu, K., Hodson, H. P., Dawes, W. N., Lock, G. D., Hannis, J. and Whitney, C., 2007. Aero-Thermal Investigations Of Tip Leakage Flow In Axial Flow Turbines: Part 2- Effects Of Relative Casing Motion. In: ASME 52nd International Gas Turbine and Aerospace Congress, 2007-05-01.

Krishnababu, S. K., Booth, G. D., Hodson, H. P., Lock, G. and Dawes, W. N., 2008. Aero-Thermal Investigation of Tip Leakage Flow in a Film-Cooled Industrial Turbine. In: 53rd International Gas Turbine and Aerospace Congress, 2008-05-01.

Krishnababu, S. K., Dawes, W. N., Hodson, H. P., Lock, G. D., Hannis, J. and Whitney, C., 2009. Aerothermal Investigations of Tip Leakage Flow in Axial Flow Turbines-Part II: Effect of Relative Casing Motion. Journal of Turbomachinery: Transactions of the ASME, 131 (1), 011007.

Krishnababu, S. K., Hodson, H. P., Booth, G. D., Lock, G. D. and Dawes, W. N., 2010. Aerothermal investigation of tip leakage flow in a film cooled industrial turbine rotor. Journal of Turbomachinery: Transactions of the ASME, 132 (2), 021016.

Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Lock, G., Booth, G. D. and , S. I. T. L., L., 2008. Aero-thermal investigation of tip leakage flow in a film cooled industrial turbine rotor. In: 2008 ASME Turbo Expo, 2008-06-09 - 2008-06-13.

Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Newton, S. J. and Lock, G. D., 2009. Numerical and experimental investigation of tip leakage flow and heat transfer using idealised rotor-tip models at transonic conditions. Aeronautical Journal, 113 (1141), pp. 165-175.

Krishnababu, S. K., Newton, P. J., Dawes, W. N., Lock, G. D., Hodson, H. P., Hannis, J. and Whitney, C., 2009. Aerothermal Investigations of Tip Leakage Flow in Axial Flow Turbines-Part I: Effect of Tip Geometry and Tip Clearance Gap. Journal of Turbomachinery: Transactions of the ASME, 131 (1), 011006.

Krishnababu, S. K., Newton, P. J., Lock, G. D., Dawes, W. N., Hodson, H. P., Hannis, J. and Whitney, C., 2007. Aero-Thermal Investigations Of Tip Leakage Flow In Axial Flow Turbines: Part 1- Effect Of Tip Geometry. In: ASME 52nd International Gas Turbine and Aerospace Congress, 2007-05-01.

Kwan, H. Y. H., Rees, D. A. S. and Pop, I., 2008. Finite Péclet number forced convection past a sphere in a porous medium using a thermal nonequilibrium model. Heat and Mass Transfer, 44 (11), pp. 1391-1399.

L

Lalwani, Y., Sangan, C. M., Wilson, M. A. and Lock, G. D., 2015. Steady computations of ingress through gas turbine rim seals. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 229 (1), pp. 2-15.

Larrañaga, M., Bou-Ali, M. M., de Mezquıa, D. A., Rees, D. A. S., Madariaga, J. A., Santamaría, C. and Platten, J. K., 2015. Contribution to the benchmark for ternary mixtures:Determination of Soret coefficients by the thermogravitational and the sliding symmetric tubes techniques. European Physical Journal B, 38 (28), 28.

Larrañaga, M., Rees, D.A. S. and Manir Bou-Ali, M., 2014. Determination of the molecular diffusion coefficients in ternary mixtures by the sliding symmetric tubes technique. Journal of Chemical Physics, 140 (5), 054201.

Lee, J., Brampton, C. J., Read, J., Bowen, C. R., Wardle, B. L. and Kim, H. A., 2015. Investigation of aligned conductive polymer nanocomposites for actuation of bistable laminates. In: 23nd AIAA/AHS Adaptive Structures Conference 2015, 2015-01-05 - 2015-01-09. American Institute of Aeronautics and Astronautics Inc..

Leppinen, D. M. and Rees, D. A. S., 2014. Natural convection in shallow porous cavities near the density maximum:The conduction and intermediate regimes. IMA Journal of Applied Mathematics, 79 (3), pp. 459-493.

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2007. Physical interpretation of flow and heat transfer in preswirl systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 129 (3), pp. 769-777.

Lewis, P. R. and Wilson, M., 2007. Three-dimensional computations of ingress in gas turbine cooling systems. In: International Gas Turbine Congress, 2007-12-01.

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2008. Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13.

Lewis, P., Wilson, M., Lock, G. D. and Owen, J. M., 2009. Effect of radial location of nozzles on performance of preswirl systems:a computational and theoretical study. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (2), pp. 179-190.

Li, T., Almond, D. P. and Rees, D. A. S., 2011. Crack imaging by scanning laser-line thermography and laser-spot thermography. Measurement Science and Technology, 22 (3), 035701.

Li, T., Rees, D. A. S. and Almond, D., 2009. Crack detection by the scanning pulsed laser spot imaging thermography. In: 15th International Conference on Photoacoustic and Photothermal Phenomena, 2009-07-19 - 2009-07-23.

Li, T., Almond, D. P. and Rees, D. A. S., 2011. Crack imaging by scanning pulsed laser spot thermography. NDT & E International, 18 (1), pp. 117-123.

Li, T., Almond, D. P., Rees, D. A. S. and Weekes, B., 2010. Crack imaging by pulsed laser spot thermography. Journal of Physics: Conference Series, 214 (1), 012072.

Li, T., Pickering, S. G., Rees, D. A. S. and Almond, D., 2010. Pulsed laser spot imaging thermography and experimental data. In: Review of Progress in Quantitative Nondestructive Evaluation vols 29A and 29B.Vol. 1211. American Institute of Physics, pp. 435-442. (AIP Conference Proceedings)

Lillico, M., Butler, R., Hunt, G. W., Watson, A. S. and Kennedy, D., 2001. Post-buckling of single and multi-bay panels using strut, strip and fe methods. In: 19th AIAA Applied Aerodynamics Conference, 2001-06-11 - 2001-06-14. Reston, Canada: American Institute of Aeronautics and Astronautics.

Liu, J., Weaver, A., Shih, T. I. P., Sangan, C. and Lock, G., 2015. Modelling and simulation of ingress into the rim seal and wheelspace of a gas-turbine rotor-stator configuration. In: 53rd AIAA Aerospace Sciences Meeting (AIAA SciTech 2015), 2015-01-05.

Liu, W. and Butler, R., 2007. Optimum buckling design of composite wing cover panels with manufacturing constraints. In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2007-04-01.

Liu, W., Butler, R. and Kim, H. A., 2012. Buckling optimization of variable angle tow panels using exact strip models. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2012-04-23 - 2012-04-26.

Liu, W. and Butler, R., 2008. Buckling optimization for composite panels with elastic tailoring. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2008-04-07 - 2008-04-10.

Liu, W., Butler, R. and Kim, H. A., 2008. Optimization of composite stiffened panels subject to compression and lateral pressure using a bi-level approach. Structural and Multidisciplinary Optimization, 36 (3), pp. 235-245.

Lock, G., 2007. Fluid Mechanics with Historical Perspective. Engineering Education: Journal of the Higher Education Academy. Engineering Subject Centre (2), 1, pp. 33-40.

Lock, G., Bullock, K., Gould, V. and Hejmadi, M., 2009. Exploring the industrial-placement experience for Mechanical Engineering undergraduates. Engineering Education: Journal of the Higher Education Academy, Engineering Subject (1), pp. 42-51.

Lock, G., Holland, E. C., Cranston, G., Kakade, V., Lewis, P. and Pilbrow, R. G., 2009. Boundary layers explained: An undergraduate laboratory using an aerofoil with leadingedge slat. International Journal of Mechanical Engineering Education, 37 (1), pp. 45-66.

Lock, G., Holland, E. C., Cranston, G., Kakade, V., Lewis, P. and Pilbrow, R. G., 2009. Boundary layers explained:An undergraduate laboratory using an aerofoil with leading-edge slat. International Journal of Mechanical Engineering Education, 37 (1), pp. 45-66.

Lock, G. and Wright, C., 2008. In undergraduate industrial design exercise at Rolls-Royce plc. International Journal of Mechanical Engineering Education, 36 (1), pp. 37-47.

Lock, G. D., Edwards, S. and Almond, D. P., 2010. Flow visualization experiments demonstrating the reverse swing of a cricket ball. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 224 (3), pp. 191-199.

M

Magyari, E. and Rees, D. A. S., 2008. The Entrainment Theorem for the Darcy free convection over a permeable vertical plate. International Journal of Thermal Sciences, 47 (9), pp. 1123-1130.

Makin, T. and Kim, H. A., 2010. Efficient voronoi metamodelling for large scale approximation. In: 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2010, 2010-09-13 - 2010-09-15. American Institute of Aeronautics and Astronautics.

Malfense Fierro, G. P., Ginzburg, D., Ciampa, F. and Meo, M., 2016. Nonlinear thermosonics and laser vibrometry for barely visible impact damage of a composite stiffener panel. In: Yu, T., Gyekenyesi, A. L., Shull, P. J. and Wu, H. F., eds. Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016, 2016-03-21 - 2016-03-24. SPIE. (Proceedings of SPIE - The International Society for Optical Engineering)

Malfense-Fierro, G. P., Ciampa, F., Ginzburg, D., Onder, E. and Meo, M., 2015. Nonlinear ultrasound modelling and validation of fatigue damage. Journal of Sound and Vibration, 343, pp. 121-130.

Margaris, P. and Gursul, I., 2007. Vortex topology of wing tip blowing. In: 45th AIAA Aerospace Sciences Meeting, 2007-01-01.

Margaris, P. and Gursul, I., 2010. Vortex topology of wing tip blowing. Aerospace Science and Technology, 14 (3), pp. 143-160.

Margaris, P., Marles, D. and Gursul, I., 2008. Experiments on Jet/Vortex Interaction. Experiments in Fluids, 44 (2), pp. 261-278.

Margaris, P., Marles, D. and Gursul, I., 2007. Experiments on interaction of a jet with a trailing vortex. In: 45th AIAA Aerospace Sciences Meeting, 2007-01-01.

Marles, D. and Gursul, I., 2007. Effect of a jet on vortex merging. In: 37th AIAA Fluid Dynamics Conference, 2007-01-01.

Marles, D., Margaris, P. and Gursul, I., 2008. Effect of an Axial Jet on Aircraft Wake Vortices. In: International Workshop on Fundamental Issues Related to Aircraft Trailing Wakes, 2008-05-27 - 2008-05-29.

Marles, D. and Gursul, I., 2008. Effect of an axial jet on vortex merging. Physics of Fluids, 20 (4), 047101.

McClain, A., Wang, Z., Vaidaki, E. and Gursul, I., 2007. Unsteady aerodynamics of free-to-roll nonslender delta wings. In: 45th AIAA Aerospace Sciences Meeting and Exhibit, 2007-01-01.

Mear, I., Michael Owen, J. and Lock, G. D., 2016. Theoretical model to determine effect of ingress on turbine disks. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 138 (3), 032502.

Mear, L. I., Owen, J. M. and Lock, G. D., 2015. Theoretical model to determine effect of ingress on turbine discs. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, GT 2015, 2015-06-15 - 2015-06-19. American Society of Mechanical Engineers (ASME), V05CT15A005.

Meo, M., 2014. Acoustic emission sensors for assessing and monitoring civil infrastructures. In: Wang, M. L., Lynch, J. P. and Sohn, H., eds. Sensor Technologies for Civil Infrastructures.Vol. 1. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 159-178. (Woodhead Publishing Series in Electronic and Optical Materials)

Meo, M., 2014. Nonlinear acoustic and ultrasound methods for assessing and monitoring civil infrastructures. In: Wang, M. L., Lynch, J. P. and Sohn, H., eds. Sensor Technologies for Civil Infrastructures.Vol. 1. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 179-200. (Woodhead Publishing Series in Electronic and Optical Materials)

Meo, M., Marulo, F., Guida, M. and Russo, S., 2013. Shape memory alloy hybrid composites for improved impact properties for aeronautical applications. Composite Structures, 95, pp. 756-766.

Meo, M., 2011. Modelling Wave Propagation in Nonlinear Elastic Solids. In: Vanhille, C. and Campos-Pozuelo, C., eds. Computational Methods in Nonlinear Acoustics: Current Trends. Transworld Research Network.

Meo, M. and Polimeno, U., 2007. Development of a single mode nonlinear acoustic resonance method for the detection of delamination due to low velocity impact. In: Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Meo, M., Polimeno, U. and Zumpano, G., 2008. Detecting damage in composite material using nonlinear elastic wave spectroscopy methods. Applied Composite Materials, 15 (3), pp. 115-126.

Meo, M. and Rossi, M., 2007. A molecular-mechanics based finite element model for strength prediction of single wall carbon nanotubes. Materials Science & Engineering A - Structural Materials Properties Microstructure and Processing, 454, p. 170.

Meo, M., Tammaro, U. and Capuano, P., 2008. Influence of topography on ground deformation at Mt. Vesuvius (Italy) by finite element modelling. International Journal of Non-Linear Mechanics, 43 (3), pp. 178-186.

Meo, M. and Zumpano, G., 2008. Damage assessment on plate-like structures using a global-local optimization approach. Optimization and Engineering, 9 (2), pp. 161-177.

Mojtabi, A. and Rees, D. A. S., 2011. The effect of conducting bounding plates on the onset of Horton-Rogers-Lapwood convection. International Journal of Heat and Mass Transfer, 54 (1-3), pp. 293-301.

Moussa, C. and Carley, M., 2008. A Lagrangian vortex method for unbounded flows. International Journal for Numerical Methods in Fluids, 58 (2), pp. 161-181.

N

Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney, C., 2007. Aero-Thermal Investigations Of Tip Leakage Flow In Axial Flow Turbines: Part 3- Tip Cooling. In: ASME 52nd International Gas Turbine and Aerospace Congress, 2007-05-01.

Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney, C., 2009. Aerothermal investigations of tip leakage flow in axial flow turbines-part III:TIP cooling. Journal of Turbomachinery: Transactions of the ASME, 131 (1), 011008.

Nielsen, M., Rhead, A. T. and Butler, R., 2014. Structural efficiency via minimisation of elastic energy in damage tolerant laminates. In: 16th European Conference on Composite Materials, ECCM 2014, 2014-06-22 - 2014-06-26. European Conference on Composite Materials, ECCM.

Noghrehabadi, A., Rees, D. A. S. and Bassom, A. P., 2013. Linear stability of a developing thermal front induced by a constant heat flux. Transport in Porous Media, 99 (3), pp. 493-513.

Nouri-Borujerdi, A., Noghrehabadi, A. R. and Rees, D. A. S., 2007. The effect of local thermal non-equilibrium on impulsive conduction in porous media. International Journal of Heat and Mass Transfer, 50 (15-16), pp. 3244-3249.

Nouri-Borujerdi, A., Noghrehabadi, A. R. and Rees, D. A. S., 2007. The linear stability of a developing thermal front in a porous medium: The effect of local thermal non-equilibrium. International Journal of Heat and Mass Transfer, 50 (15-16), pp. 3090-3099.

Nouri-Borujerdi, A., Noghrehabadi, A. R. and Rees, D. A. S., 2008. Influence of Darcy number on the onset of convection in a porous layer with a uniform heat source. International Journal of Thermal Sciences, 47 (8), pp. 1020-1025.

Nouri-Borujerdi, A., Noghrehabadi, A. R. and Rees, D. A. S., 2007. Onset of convection in a horizontal porous channel with uniform heat generation using a thermal nonequilibrium model. Transport in Porous Media, 69 (3), pp. 343-357.

Nouri-Borujerdi, A., Noghrehabadi, A. R. and Rees, D. A. S., 2007. The effect of local thermal non-equilibrium on conduction in porous channels with a uniform heat source. Transport in Porous Media, 69 (2), pp. 281-288.

O

Orlando, C., Carley, M. and Marretta, R. M. A., 2009. Adaptive BEM for low noise propeller design. The Open Acoustics Journal, 2 (1), pp. 20-30.

Owen, J. M., Wu, K., Scobie, J. A., Sangan, C. M., Cho, G. and Lock, G. D., 2015. Use of pressure measurements to determine effectiveness of turbine rim seals. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 137 (3), 032510.

Owen, J. M., Zhou, K., Wilson, M., Pountney, O. and Lock, G., 2010. Prediction of ingress through turbine rim seals part 1:externally-induced ingress. In: ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010.Vol. 4. American Society of Mechanical Engineers, pp. 1217-1234. (Proceedings of the ASME Turbo Expo)

Owen, J. M., Pountney, O. and Lock, G., 2012. Prediction of ingress through turbine rim seals-part II:Combined ingress. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031013.

Owen, J. M., Zhou, K., Pountney, O., Wilson, M. and Lock, G., 2012. Prediction of ingress through turbine rim seals-part I:Externally induced ingress. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031012.

Owen, J. M., Wu, K., Scobie, J., Sangan, C. M., Cho, G. and Lock, G. D., 2014. Use of pressure measurements to determine effectiveness of turbine rim seals. In: ASME Turbo EXpo 2014, 2014-06-16 - 2014-06-20. Dusseldorf, Germany: ASME.

Owen, J. M., Pountney, O. and Lock, G., 2010. Prediction of ingress through turbine rim seals:Part 2 combined ingress. In: ASME Turbo Expo 2010.Vol. 4. New York, U. S. A.: American Society of Mechanical Engineers, pp. 1235-1245. (Proceedings of the ASME Turbo Expo)

Owen, M., Lock, G., Sangan, C., Tham, K. M., Laurello, V. and Lee, C.P., 2012. Finned seal assembly for gas turbine engines. USPTO- 2012P08852US, 2012.

P

Parkes, P. N., Butler, R., Meyer, J. and de Oliveira, A., 2014. Static strength of metal-composite joints with penetrative reinforcement. Composite Structures, 118, pp. 250-256.

Parkes, P.N., Butler, R. and Almond, D.P., 2012. Growth of damage in additively manufactured metal-composite joints. In: 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, 2012-06-24 - 2012-06-28.

Patil, P. M. and Rees, D. A. S., 2014. The onset of convection in a porous layer with multiple horizontal solid partitions. International Journal of Heat and Mass Transfer, 68, pp. 234-246.

Paul, M. C., Rees, D. A. S. and Wilson, M., 2008. Receptivity of free convective flow from a heated vertical surface. I. Linear waves. International Journal of Thermal Sciences, 47 (10), pp. 1382-1392.

Paul, M. C., Rees, D. A. S. and Wilson, M., 2010. Thermal receptivity of free convective flow from a heated vertical surface: Nonlinear waves. Computational Thermal Sciences, 2 (5), pp. 421-437.

Pernice, M. F., Annicchiarico, D., Petriccione, A., De Tommaso, G., Meo, M., Antonucci, V. and Zarrelli, M., 2011. Structural polymer composite materials for muscle-skeletal diagnostic systems. Journal of Reinforced Plastics and Composites, 30 (4), pp. 287-300.

Phani, A. S., Butler, R., Habgood, S. and Bowen, C. R., 2008. Analysis of wing morphing via frame buckling. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2008-04-07 - 2008-04-10.

Pinto, F., Carotenuto, G. and Meo, M., 2015. Preparation and thermomechanical characterisation of graphene nanoplatelets/low-density polyethylene composites. Journal of Thermoplastic Composite Materials, 28 (6), pp. 745-761.

Pinto, F., D'Oriano, G. and Meo, M., 2014. Dielectric Elastomer based active layer for macro-scaled industrial application in roto-flexographic printing. In: Proceedings of SPIE - The International Society for Optical Engineering.Vol. 9056. SPIE - Society of Photo-Optical Instrumentation Engineers.

Pinto, F., Iervolino, O., Scarselli, G., Ginzburg, D. and Meo, M., 2016. Bioinspired twisted composites based on Bouligand structures. In: Martin Palma, R. J., Lakhtakia, A. and Knez, M., eds. Bioinspiration, Biomimetics, and Bioreplication 2016, 2016-03-21 - 2016-03-22. SPIE. (Proceedings of SPIE. Materials and Processing; 9797)

Pinto, F., Maroun, F.Y. and Meo, M., 2014. Material enabled thermography. NDT & E International, 67, pp. 1-9.

Pinto, F., White, A. and Meo, M., 2013. Characterisation of ductile prepregs. Applied Composite Materials, 20 (2), pp. 195-211.

Polimeno, U., Meo, M. and Almond, D., 2008. Smart nonlinear acoustic based structural health monitoring system. Advances in Science and Technology, 56, pp. 426-434.

Pountney, O., Cho, G., Lock, G. D. and Owen, J. M., 2012. Solutions of Fourier's equation appropriate for experiments using thermochromic liquid crystal. International Journal of Heat and Mass Transfer, 55 (21-22), pp. 5908-5915.

Pountney, O., Sangan, C., Lock, G. D. and Owen, J. M., 2013. Effect of ingestion on temperature of turbine discs. Journal of Turbomachinery: Transactions of the ASME, 135 (5), 051010.

Pountney, O., Sangan, C., Owen, M. and Lock, G., 2012. Effect of ingestion on temperature of turbine discs (ASME GT2012-68496). In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15. Copenhagen, Denmark: ASME, pp. 1997-2012.

R

Rabs, M., Benra, F.-K., Dohmen, H.J., Lock, G. D. and Schneider, O., 2012. Model simplifications for numerical simulation of ingestion through gas turbine rim seals. In: 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2012, 2014-02-27 - 2014-03-02.

Rashed, A., Almond, D. P., Rees, D. A. S., Burrows, S. E. and Dixon, S., 2007. Crack detection by laser spot imaging thermography.

Rathish Kumar, B. V., Belouettar, S., Murthy, S. K., Sangwan, V., Nigam, M., Shalini, [N. V.], Rees, D. A. S. and Chandra, P., 2009. Soret and Dufour effect on double diffusive natural convection in a wavy porous enclosure. In: Acosta, J. L. and Camacho, A. F., eds. Porous Media: Heat and Mass Transfer, Transport and Mechanics. Nova.

Rees, D. A. S., 2015. Convection of a Bingham fluid in a porous medium. In: Vafai, K., ed. Handbook of Porous Media (3rd ed.). London, U. K.: CRC Press.

Rees, D. A. S., 2015. On convective boundary layer flows of a Bingham fluid in a porous medium. International Journal of Heat and Mass Transfer, 82, pp. 206-212.

Rees, D. A. S., 2016. The convection of a Bingham fluid in a differentially-heated porous cavity. International Journal for Numerical Methods in Heat and Fluid Flow, 26 (3/4), pp. 879-896. Item availability may be restricted.

Rees, D. A. S. and Bassom, A.P., 2015. Unsteady thermal boundary layer flows of a Bingham fluid in a porous medium. International Journal of Heat and Mass Transfer, 82, pp. 460-467.

Rees, D. A. S. and Mojtabi, A., 2013. The effect of conducting boundaries on Lapwood-Prats convection. International Journal of Heat and Mass Transfer, 65, pp. 765-778.

Rees, D. A. S., Nield, D. A. and Kuznetsov, A. V., 2008. Vertical free convective boundary-layer flow in a bidisperse porous medium. Journal of Heat Transfer, 130 (9), 092601-1.

Rees, D. A. S. and Pop, I., 2005. Local thermal non-equilibrium in porous medium convection. In: Ingham, D. B. and Pop, I., eds. Transport Phenomena in Porous Media III. Oxford: Elsevier, pp. 147-173.

Rees, D. A. S., 2009. Microscopic modelling of the two-temperature model for conduction in heterogeneous media: three-dimensional media. In: 4th International Conference on Applications of Porous Media, 2009-08-10 - 2009-08-12.

Rees, D. A. S. and Barletta, A., 2011. Linear Instability of the Isoflux Darcy-Benard Problem in an Inclined Porous Layer. Transport in Porous Media, 87 (3), pp. 665-678.

Rees, D. A. S. and Bassom, A. P., 2008. The radial injection of a hot fluid into a cold porous medium: the effects of local thermal non-equilibrium. In: CHT-08, Advances in Computational Heat Transfer, 2008-05-11 - 2008-05-16.

Rees, D. A. S., Bassom, A. P. and Postelnicu, A., 2008. The linear vortex instability of the near-vertical line source plume in porous media. Transport in Porous Media, 74 (2), pp. 221-238.

Rees, D. A. S., Bassom, A. P. and Siddheshwar, P. G., 2008. Local thermal non-equilibrium effects arising from the injection of a hot fluid into a porous medium. Journal of Fluid Mechanics, 594, pp. 379-398.

Rees, D. A. S. and Genc, G., 2011. The onset of convection in porous layers with multiple horizontal partitions. International Journal of Heat and Mass Transfer, 54 (13-14), pp. 3081-3089.

Rees, D. A. S. and Mojtabi, A., 2011. The Effect of Conducting Boundaries on Weakly Nonlinear Darcy-Benard Convection. Transport in Porous Media, 88 (1), pp. 45-63.

Rees, D. A. S., Selim, A. and Ennis-King, J. P., 2008. The instability of unsteady boundary layers in porous media. In: Vadasz, P., ed. Emerging Topics in Heat and Mass Transfer in Porous Media.Vol. 22. Dordrecht, Netherlands: Springer, pp. 85-110. (Theory and Applications of Transport in Porous Media)

Rees, D. A. S. and Nield, D. A., 2016. The effect of an embedded solid block on the onset of convection in a porous cavity. International Journal of Numerical Methods in Heat and Fluid Flow, 26 (3-4), pp. 950-976. Item availability may be restricted.

Rees, D. A. S., Bassom, A. P. and Genç, G., 2014. Weakly nonlinear convection in a porous layer with multiple horizontal partitions. Transport in Porous Media, 103 (3), pp. 437-448.

Rhead, A.T., Butler, R. and Hunt, G.W., 2012. Compressive strength following delamination induced interaction of panel and sublaminate buckling. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2012-04-23 - 2012-04-26.

Rhead, A.T. and Butler, R., 2014. Designing for damage tolerance. JEC Composites Magazine, 51 (88), pp. 57-61.

Rhead, A.T., Dodwell, T.J. and Butler, R., 2012. The effect of tow gaps on compression after impact strength of AFP laminates. In: 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, 2012-06-24 - 2012-06-28.

Rhead, A., Butler, R. and Hunt, G. W., 2007. Enhanced compressive fatigue model for impact damaged laminates. In: 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace", 2007-07-08 - 2007-07-13.

Rhead, A. and Butler, R., 2008. A static compressive strength model for damaged composite laminates. In: 13th European Conference on Composite Materials, 2009-06-02 - 2009-06-05.

Rhead, A., Butler, R. and Baker, N., 2009. Compression Testing of Laminates Optimised for Damage Tolerance. In: 17th International Conference on Composite Materials, ICCM-17, 2009-07-27 - 2009-07-31.

Rhead, A., Hua, S. and Butler, R., 2015. Damage resistance and damage tolerance of hybrid carbon-glass laminates. Composites Part A - Applied Science and Manufacturing, 76, pp. 224-232.

Rhead, A. T., 2009. Analysis and optimisation of postbuckled damage tolerant composite laminates. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Rhead, A. T. and Butler, R., 2009. Compressive static strength model for impact damaged laminates. Composites Science and Technology, 69 (14), pp. 2301-2307.

Rhead, A. T., Marchant, D. and Butler, R., 2010. Compressive strength of composite laminates following free edge impact. Composites Part A Applied Science and Manufacturing, 41 (9), pp. 1056-1065.

Rhead, A. T., Butler, R. and Hunt, G. W., 2009. Post-buckled propagation model for compressive fatigue of impact damaged laminates. International Journal of Solids and Structures, 45 (16), pp. 4349-4361.

Rhead, A. T., Shi, H. and Butler, R., 2011. Damage resistance and damage tolerance of hybrid carbon-glass laminates. In: 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2011-04-03 - 2011-04-06. American Institute of Aeronautics and Astronautics.

Robinson, K., Wilson, M., Leathard, M. J. and Hawley, J. G., 2007. Computational modelling of convective heat transfer in a simulated engine cooling gallery. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221 (9), pp. 1147-1157.

Rojratsirikul, P., Wang, Z. and Gursul, I., 2010. Unsteady fluid-structure interactions of membrane airfoils at low Reynolds numbers. In: Taylor, G. K., Triantafyllou, M. S. and Tropea, C., eds. Animal Locomotion. Berlin, Germany: Springer, pp. 297-310.

Rojratsirikul, P., Genc, M. S., Wang, Z. and Gursul, I., 2011. Flow-induced vibrations of low aspect ratio rectangular membrane wings. Journal of Fluids and Structures, 27 (8), pp. 1296-1309.

Rojratsirikul, P., Wang, Z. and Gursul, I., 2009. Effect of pre-strain and excess length on unsteady fluid-structure interactions of membrane airfoils. In: 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2009-01-05 - 2009-01-08.

Rojratsirikul, P., Wang, Z. and Gursul, I., 2008. Unsteady Aerodynamics of Membrane Airfoils. In: 46th AIAA Aerospace Sciences Meeting and Exhibit, 2008-01-07 - 2008-01-10.

Rojratsirikul, P., Wang, Z. and Gursul, I., 2010. Unsteady aerodynamics of low aspect ratio membrane wings. In: 48th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, 2010-01-04.

S

Sangan, C. M., Scobie, J. A., Owen, J. M., Lock, G. D., Tham, K. M. and Laurello, V., 2014. Performance of a finned turbine rim seal. Journal of Turbomachinery: Transactions of the ASME, 136 (11), TURBO-14-1162.

Sangan, C. M., Scobie, J., Owen, J. M., Lock, G. D., Tham, K.-M. and Laurello, V., 2014. Performance of a finned turbine rim seal. Dusseldorf, Germany: ASME.

Sangan, C.M., Pountney, O.J., Zhou, K., Wilson, M., Owen, J.M. and Lock, G.D., 2011. Experimental measurements of ingestion through turbine rim seals. Part 2:rotationally-induced ingress (ASME GT2011-45313). In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011, 2011-06-05 - 2011-06-09. Vancouver, Canada: ASME, pp. 755-765.

Sangan, C., Lalwani, Y., Owen, M. and Lock, G., 2014. Fluid dynamics of a gas turbine wheel-space with ingestion. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 228 (5), pp. 508-524.

Sangan, C., Pountney, O., Scobie, J., Wilson, M., Owen, M. and Lock, G., 2012. Experimental measurements of ingestion through turbine rim seals. Part 3: Single and double seals. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15. Copenhagen, Denmark: ASME, pp. 1983-1995.

Sangan, C. M., 2011. Measurement of Ingress through Gas Turbine Rim Seals. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Sangan, C. M., Pountney, O., Zhou, K., Owen, J. M., Wilson, M. and Lock, G., 2013. Experimental measurements of ingestion through turbine rim seals, Part 2:rotationally-induced ingress. Journal of Turbomachinery: Transactions of the ASME, 135 (2), 021013.

Sangan, C. M., Pountney, O., Zhou, K., Wilson, M., Owen, J. M. and Lock, G., 2013. Experimental measurements of ingestion through turbine rim seals. Part 1:externally induced ingress. Journal of Turbomachinery: Transactions of the ASME, 135 (2), 021012.

Sangan, C. M., Zhou, K., Litherland, K., Lam, R. and Lock, G. D., 2011. Thermal imaging as flow visualization for gas-turbine film cooling. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 225 (G4), pp. 417-431.

Sangan, C. M., Zhou, K., Owen, J. M., Pountney, O. J., Wilson, M. and Lock, G. D., 2011. Experimental measurements of ingestion through turbine rim seals. Part 1: Externally-induced ingress (ASME GT2011-45310). In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011, 2011-06-05 - 2011-06-09. Vancouver, Canada: ASME, pp. 741-753.

Sangan, C. M., Lalwani, Y., Owen, J. M. and Lock, G. D., 2013. Experimental measurements of ingestion through turbine rim seals. Part 5: Fluid dynamics of wheel-space (ASME GT2013-94148). In: ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, 2013-06-03 - 2013-06-07, Texas. San Antonio, U.S.A.: ASME, V03AT15A003.

Sargison, J.E., Guo, S.M., Oldfield, M.L.G., Lock, G.D. and Rawlinson, A.J., 2001. A converging slot-hole film-cooling geometry Part 1:Low-speed flat-plate heat transfer and loss. In: Proceedings of the ASME Turbo Expo 2001.Vol. 3. ASME.

Scarselli, G., Nicassio, F., Pinto, F., Ciampa, F., Iervolino, O. and Meo, M., 2016. A novel bistable energy harvesting concept. Smart Materials and Structures

Scobie, J. A., Pickering, S. G., Almond, D. P. and Lock, G. D., 2013. Fluid dynamics of cricket ball swing. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 227 (3), pp. 196-208.

Scobie, J., Sangan, C., Owen, M. and Lock, G., 2015. An overview of hot gas ingestion research at the University of Bath. In: 11th European Turbomachinery Conference (ETC 2015), 2015-03-23. European Turbomachinery Society.

Scobie, J., Sangan, C., Teuber, R., Pountney, O., Owen, M., Wilson, M. and Lock, G., 2014. Experimental measurements of ingestion through turbine rim seals. Part 4: Off-design conditions. In: ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, 2013-06-03 - 2013-06-07, Texas. San Antonio, U.S.A.: ASME.

Scobie, J. A., Sangan, C. M., Owen, J. M., Wilson, M. and Lock, G. D., 2014. Experimental measurements of hot gas ingestion through turbine rim seals at off-design conditions. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 228 (5), pp. 491-507.

Scobie, J. A., Teuber, R., Li, Y. S., Sangan, C. M., Wilson, M. and Lock, G. D., 2016. Design of an improved turbine rim-seal. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 138 (2), 022503.

Selim, A. and Rees, D. A. S., 2010. Linear and nonlinear evolution of isolated disturbances in a growing thermal boundary layer in porous media. In: Vafai, K., ed. Porous Media and Its Applications in Science, Engineering and Industry. Melville: American Institute of Physics, pp. 47-52. (AIP Conference Proceedings)

Selim, A. and Rees, D. A. S., 2007. The stability of a developing thermal front in a porous medium. I linear theory. Journal of Porous Media, 10 (1), pp. 1-16.

Solmuş, I., Rees, D. A. S., Yamali, C., Baker, D. and Kaftanoǧlu, B., 2012. Numerical investigation of coupled heat and mass transfer inside the adsorbent bed of an adsorption cooling unit. International Journal of Refrigeration, 35 (3), pp. 652-662.

Solmuş, I., Rees, D. A. S., Yamali, C. and Baker, D., 2012. A two-energy equation model for dynamic heat and mass transfer in an adsorbent bed using silica gel/water pair. International Journal of Heat and Mass Transfer, 55 (19-20), pp. 5275-5288.

Song, Y.-Z., Bowen, C. R., Kim, A. H., Nassehi, A., Padget, J. and Gathercole, N., 2014. Virtual visual sensors and their application in structural health monitoring. Structural Health Monitoring - An International Journal, 13 (3), pp. 251-264.

Song, Y.-Z., Bowen, C. R., Kim, H. A., Nassehi, A., Padget, J., Gathercole, N. and Dent, A., 2014. Non-invasive damage detection in beams using marker extraction and wavelets. Mechanical Systems and Signal Processing, 49 (1-2), pp. 13-23.

Song, Y.-Z., Bowen, C., Kim, H. A., Nassehi, A., Padget, J., Gathercore, N. and Dent, A., 2011. Non-invasive damage detection in composite beams using marker extraction and wavelets. Proceedings of SPIE - The International Society for Optical Engineering, 7983, 79830R.

T

Taylor, G., Wang, Z., Vardaki, E. and Gursul, I., 2007. Lift enhancement over flexible nonslender delta wings. AIAA Journal, 45 (12), pp. 2979-2993.

Taylor, G. S., Gursul, I. and Greenwell, D. I., 2001. Static hysteresis of vortex breakdown due to support interference. In: 19th AIAA Applied Aerodynamics Conference, 2001-06-11 - 2001-06-14. Reston, Canada: American Institute of Aeronautics and Astronautics.

Teuber, R., Li, Y. S., Maltson, J., Wilson, M., Lock, G. D. and Owen, J. M., 2013. Computational extrapolation of turbine sealing effectiveness from test rig to engine conditions. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227 (2), pp. 167-178.

Teuber, R., Li, Y.S., Maltson, J., Wilson, M., Lock, G. and Owen, J.M., 2012. Computational extrapolation of turbine sealing effectiveness from test rig to engine conditions. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15.

Tregidgo, L., Wang, Z. and Gursul, I., 2013. Unsteady fluid-structure interactions of a pitching membrane wing. Aerospace Science and Technology, 28 (1), pp. 79-90.

Tregidgo, L., Wang, Z. and Gursul, I., 2011. Low aspect-ratio membrane wing undergoing transient pitching motion at a low Reynolds number. In: 41st AIAA Fluid Dynamics Conference and Exhibit 2011, 2011-06-27 - 2011-06-30.

Tregidgo, L., Wang, Z. and Gursul, I., 2011. Fluid-structure interactions for a low aspect-ratio membrane wing at low reynolds numbers. In: 41st AIAA Fluid Dynamics Conference and Exhibit 2011, 2011-06-27 - 2011-06-30.

Tsartaris, N., Dolce, F., Polimeno, U., Meo, M., Guida, M., Marulo, F. and Riccio, M., 2009. Low velocity impact behavior of fiber metal laminates. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22.

Tsartsaris, N., Meo, M., Dolce, F., Polimeno, U., Guida, M. and Marulo, F., 2011. Low-velocity impact behavior of fiber metal laminates. Journal of Composite Materials, 45 (7), pp. 803-814.

U

Ussorio, M., Perugini, P., Meo, M., Mataloni, A. and Milella, E., 2009. Damage tolerance modeling in design of space launcher motor cases. In: SAMPE 2009 (Society for the Advancement of Material and Process Engineering), 2009-05-18 - 2009-05-21.

V

Visrolia, A., Angioni, S. L. and Meo, M., 2010. A hierarchical XFEM plate model for the simulation of composite laminates failure. In: ECCM 2010: IV European Conference on Computational Mechanics, 2010-05-16 - 2010-05-21.

W

Waheed, M. A. and Rees, D. A. S., 2008. Heatfunction analysis of the Rayleigh-B´enard problem in porous media. In: CHT-08: Advances in Computational Heat Transfer, 2008-05-11 - 2008-05-16.

Wang, L. and Wilson, M. A., 2014. Effects of ingestion on the flow and heat transfer in a rotor-stator system. In: 15th International Heat Transfer Conference, IHTC-15, 2014-08-10 - 2014-08-15.

Wang, L. and Wilson, M., 2012. Computations of flow and heat transfer in a rotor-stator system with externally-induced ingestion. International Journal of Gas Turbine, Propulsion and Power Systems, 4 (1), pp. 10-18.

Wang, Z., Jiang, P. and Gursul, I., 2007. Effect of thrust vectoring jets on delta wing aerodynamics. AIAA Journal of Aircraft, 44 (6), pp. 1877-1888.

Wang, Z., Hu, T. and Gursul, I., 2014. Active control of self-excited roll oscillations of LAR wings. In: Zhou, Y., Liu, Y., Huang, L. and Hodges, D. H., eds. Fluid-Structure-Sound Interactions and Control. Berlin, Germany: Springer, pp. 357-362. (Lecture Notes in Mechanical Engineering)

Wang, Z. and Gursul, I., 2012. Unsteady characteristics of inlet vortices. Experiments in Fluids, 53 (4), pp. 1015-1032.

Wang, Z. and Gursul, I., 2011. An Experimental Study of the Formation and Unsteady Characteristics of Inlet Vortices. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, January 4, 2011 - January 7, 2011, 2011-01-01.

Wang, Z. and Gursul, I., 2011. An experimental study of the formation and unsteady characteristics of inlet vortices. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Reston, U. S. A.: American Institute of Aeronautics and Astronautics.

Wang, Z., Gursul, I. and Wu, J., 2015. A new approach to flow control of massively separated flow over an aerofoil. In: The 6th annual Airbus Flight Physics Distributed R&T Partnership (DiPaRT) event and The Airbus Flight Physics Symposium, 2015-11-16 - 2015-11-18, Bristol and Bath Science Park.

Wang, Z., Gursul, I. and Wu, J., 2015. Post-stall lift enhancement of a flat plate airfoil by suction. In: AIAA Science and Technology Forum and Exposition (SciTech 2015), 2015-01-05 - 2015-01-09, FL.

Williams, N. M., Wang, Z. and Gursul, I., 2008. Active flow control on a nonslender delta wing. AIAA Journal of Aircraft, 45 (6), pp. 2100-2110.

Williams, N., Wang, Z. and Gursul, I., 2008. Active Flow Control on a Nonslender Delta Wing. In: AIAA 46th Aerospace Sciences Meeting, 2008-01-07 - 2008-01-10.

Williams, P. A., Butler, R., Kim, H. A. and Hunt, G. W., 2007. A comparison of analytical methods for post-buckling of truss-lattice shear panels. In: 48th AIAA SDM, ASC, NDA, GSF and MDO Conference, 2007-05-01.

Williams, P. A., Butler, R., Kim, H. A. and Hunt, G. W., 2007. Complementary post-buckling analyses of truss-lattice shear panels. In: AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2008-01-01.

Williams, P. A., Butler, R., Kim, H. A. and Hunt, G. W., 2008. Postbuckling of truss-lattice shear panels using exact theory. Journal of Mechanics of Materials and Structures, 3 (5), pp. 995-1009.

Williams, P. A., Kim, H. A. and Butler, R., 2008. Bi-modal buckling of optimised truss-lattice shear panels. AIAA Journal, 46 (8), pp. 1937-1962.

Williams, P. A., Kim, H. A. and Butler, R., 2007. Bimodal buckling of optimised truss-lattice shear panels. In: AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2008-01-01.

Williams, P. A., Kim, H. A. and Butler, R., 2008. Discrete modeling method for post-buckling of shear panels. In: 8th World Congress on Computational Mechanics, 2008-06-30 - 2008-07-04.

Wilson, M. and Wallace, F.J., 1986. A comprehensive phenomenological model of the jet mixing process in D.I. diesel engines. In: International Off-Highway and Powerplant Congress and Exposition, 1986-09-08 - 1986-09-10.

Z

Zhang, X., Wang, Z. and Gursul, I., 2015. Interaction of multiple vortices over a double delta wing. In: AIAA Aviation Forum 2015, 2015-06-22 - 2015-06-26, Hilton Anatole.

Zhang, X., Wang, Z. and Gursul, I., 2016. Interaction of multiple vortices over a double delta wing. Aerospace Science and Technology, 48, pp. 291-307.

Zhou, C., Hodson, H. and Lock, G., 2012. Thermal Performance of Cooled Tips in a High-Pressure Turbine Cascade. Journal of Propulsion and Power, 28 (5), pp. 900-911.

Zhou, K., Wilson, M., Owen, J. M. and Lock, G. D., 2013. Computation of ingestion through gas turbine rim seals. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 227 (7), pp. 1101-1113.

Zhou, K., Wilson, M., Owen, J. M. and Lock, G., 2011. Computation of ingestion through gas turbine rim seals. In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011, 2011-06-05 - 2011-06-09. ASME, pp. 767-777.

Zumpano, G. and Meo, M., 2008. Damage detection in an aircraft foam sandwich panel using nonlinear elastic wave spectroscopy. Computers and Structures, 86 (3-5), pp. 483-490.

Zumpano, G. and Meo, M., 2008. Damage localization using transient non-linear elastic wave spectroscopy on composite structures. International Journal of Non-Linear Mechanics, 43 (3), pp. 217-230.

This list was generated on Sat Oct 21 21:33:39 2017 IST.