Research

Items from Research Centres & Institutes > Innovative Design & Manufacturing Research Centre (IdMRC)

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items at this level: 410.

A

Abulrub, A. H. G., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2008. Performance Assessment of a Multi-Frequency Controller Applied to a Flexible Rotor Magnetic Bearing System - Contact Dynamics. In: Ulbrich, H. and Ginzinger, L., eds. 9th International Conference on Motion and Vibration Control, 2008-09-15 - 2008-09-18, Munich.

Abulrub, A. H., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. Performance assessment of a multi-frequency controller applied to a flexible rotor magnetic bearing system - contact dynamics. In: 9th International Conference on Motion and Vibration Control, 2008-09-15 - 2008-09-18, Munich.

Abulrub, A. H., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. Robustness of recursive auto-tuning strategy in flexible rotor and magnetic bearing systems. In: 11th International Symposium on Magnetic Bearings, 2008-08-26 - 2008-08-29, Nara.

Adams, P. W., Hammond, G., McManus, M. and Mezzullo, W., 2008. Barriers to UK bioenergy development: experiences from the South West of England. In: Biomass and Energy Crops III (Association of Applied Biologists), 2008-12-10 - 2008-12-12, York.

Aksakal, B., Osman, F. H. and Bramley, A. N., 2008. Determination of experimental axial and sideways metal flow in open die forging. Materials & Design, 29 (3), pp. 576-583.

Allen, S. R., Hammond, G. P. and McManus, M. C., 2008. Energy analysis and environmental life cycle assessment of a micro-wind turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (A7), pp. 669-684.

Allen, S. R., Hammond, G. P. and McManus, M. C., 2008. Prospects for and barriers to domestic micro-generation: a United Kingdom perspective. Applied Energy, 85 (6), pp. 528-544.

Allen, S. R., Hammond, G. P., Harajli, H. A., Jones, C. I., McManus, M. C. and Winnett, A. B., 2008. Integrated appraisal of micro-generators: methods and applications. Proceedings of the Institution of Civil Engineers - Energy, 161 (2), pp. 73-86.

Armoutis, N., Maropoulos, P. G., Matthews, P. and Lomas, C., 2008. Establishing agile supply networks through competence profiling. International Journal of Computer Integrated Manufacturing, 21 (2), pp. 166-173.

Austin, S. A., Tang, L., Zhao, Y., Darlington, M. and Culley, S., 2008. Information: what is it worth? In: Seminar on Knowledge and Information Management Through-life, Institution of Mechanical Engineers, 2008-06-24, London.

B

Baguley, P., Maropoulos, P. and Pease, R., 2008. A Roadmap for Cost Engineering in the Automotive Supplier Sector. International Journal of Manufacturing Technology and Management (IJMTM), 15 (3/4), pp. 265-283.

Ball, A., 2012. Minimum Mandatory Metadata Set for RAIDmap. Other. Bath, UK: University of Bath.

Ball, A., 2012. Review of Data Management Lifecycle Models. Other. Bath, UK: University of Bath.

Ball, A., 2010. Review of the State of the Art of the Digital Curation of Research Data. Other. Bath: University of Bath. (ERIM Project Document; ERIM Project Documen)

Ball, A., 2010. The KIM and ERIM Projects. In: University of Bath Library Summer Staff Development Programme, 2010-08-05, Bath.

Ball, A., 2010. Thematic Analysis of Data Management Plan Tools and Exemplars. Other. Bath, UK: University of Bath. (ERIM Project Document; erim6rep100701ab10)

Ball, A., 2012. Tools for research data management. Other. Bath, UK: University of Bath.

Ball, A. and Darlington, M., 2012. Review of DCC Tools and Guidance. Other. Bath, UK: University of Bath.

Ball, A. and Darlington, M., 2012. University of Bath Department of Mechanical Engineering DMP Online Template. Other. Bath, UK: University of Bath.

Ball, A., Darlington, M. and Howard, T., 2010. Modelling the Development of Research Data. In: 6th International Digital Curation Conference, 2010-12-06 - 2010-12-08, Chicago.

Ball, A., Darlington, M., Howard, T., McMahon, C. and Culley, S., 2010. Engineering Research Data Management Plan Requirement Specification. Other. Bath, UK: University of Bath. (ERIM Project Document; erim6rep100901ab11)

Ball, A., Darlington, M., Howard, T., McMahon, C. and Culley, S., 2012. Visualizing research data records for their better management. Journal of Digital Information, 13 (1).

Ball, A., Darlington, M., Thangarajah, U., McMahon, C. and Lyon, E., 2011. Research Data Management for Mechanical Engineering Departments. In: 7th International Digital Curation Conference, 2011-12-05 - 2011-12-07, Marriott Royal Hotel, Bristol.

Ball, A., Patel, M. and Ding, L., 2008. Towards a Curation and Preservation Architecture for CAD Engineering Models. In: iPRES 2008: The Fifth International Conference on Preservation of Digital Objects, 2008-09-29 - 2008-09-30, London.

Ball, A. and Thangarajah, U., 2012. RAIDmap Application Developer Guide. Other. Bath, UK: University of Bath.

Ball, A., Thangarajah, U., Darlington, M., McMahon, C. and Lyon, E., 2012. Associating Research Data Records using RAIDmap. In: Meeting (Disciplinary) Challenges in Research Data Management Planning, 2012-03-23, Etc. venues, Paddington, London.

Barrie, J. and Owen, G., 2013. Exploring featherweight industry PLM solutions for academic use. In: Kovacevic, A., Lawlor, J. and Parkinson, B., eds. Proceedings of the 15th International Conference on Engineering and Product Design Education. Design Society, pp. 480-486.

Barrie, J. and Culley, S., 2012. Creating a component selection resource for undergraduate design teaching. In: Design Education for Future Wellbeing, Proceedings of the 14th International Conference on Engineering and Product Design Education (E&PDE12). .

Barrie, J. and Culley, S., 2012. Creating a component selection resource for undergraduate design teaching. In: International Conference on Engineering and Product Design Education, 2012-09-05 - 2012-09-06, Artesis University College, Antwerp.

Barrie, J. and Culley, S., 2012. Creating a component selection resource for undergraduate design teaching. In: Buck, L., Frateur, G., Ion, W., McMahon, C., Baelus, C., De Grande, G. and Verwulgen, S., eds. Design Education for Future Wellbeing. Glasgow: The Design Society, pp. 199-204.

Boa, D.R., Hicks, B. and Nassehi, A., 2013. A comparison of product preference and visual behaviour for product representations. In: Proceedings of the International Conference on Engineering Design, ICED. Vol. 7 DS75-07. , pp. 487-496.

Boujut, J. F., McMahon, C. and Subrahmanian, E., 2009. Annotation in design and product engineering: an introduction to the special issue. Research in Engineering Design, 20 (3), pp. 145-147.

Bradshaw, S., Bowyer, A. and Haufe, P., 2010. The intellectual property implications of low-cost 3D printing. ScriptEd, 7 (1), pp. 5-31.

Brown, A. I., Hammond, G. P., Jones, C. I. and Rogers, F. J., 2009. Greening the UK building stock : Historic trends and low carbon futures 1970-2050. Transactions of the Canadian Society for Mechanical Engineering, 33 (1), pp. 89-104.

Buckingham, M., Dekoninck, E. and McMahon, C., 2013. Improving eco-design projects through better understanding of the company characteristics and business context. In: Proceedings of the International Conference on Engineering Design, ICED. Vol. 3 DS75-03. , pp. 337-345.

Burt, G. M., Hammond, G. P. and Infield, D., 2008. Special Issue on Highly Distributed Power Systems. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (A7), I-III.

Butler, R. and Liu, W., 2008. Optimisation of stiffened panels using finite strip models. In: Falzon, B. G. and Aliabadi, M. H., eds. Buckling and postbuckling structures. London: Imperial College Press.

Butler, R., Baker, N. and Liu, W., 2009. Damage Tolerance of Buckling Optimized Variable Angle Tow Panels. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2009-05-04 - 2009-05-07, Palm Springs, CA.

C

Cabannes, G., Goh, Y.-M., Troussier, N., Gidel, T. and McMahon, C., 2008. Taking into account of information uncertainty (variability and maturity) in assessing product risk. In: Proceedings of IDMME, Virtual Concept, 2008-10-01, Beijing, PRC.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2009. An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 6. New York: ASME, pp. 855-865.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. On the design of an active auxiliary bearing for rotor/magnetic bearing systems. In: 11th International Symposium on Magnetic Bearings, 2008-08-26 - 2008-08-29, Nara.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. On the use of auxiliary bearing to escape trapped contact modes in rotor/magnetic bearings. In: 9th International Conference on Vibrations in Rotating Machinery, 2008-09-07 - 2008-09-11, University of Exeter, Exeter.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2009. On the use of actively controlled auxiliary bearings in magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 131 (2), 022507.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2008. On the use of actively controlled auxiliary bearings in magnetic bearning systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin.

Cai, B., Maropoulos, P., Guo, Y. and Jamshidi, J., 2008. Large Volume Measurability Analysis for Early Design. In: 5th International Conference on Digital Enterprise Technology (DET08), 2008-10-22 - 2008-10-24, Nantes.

Cantoni, S., Carrino, L., Nassehi, A., Newman, S., Tolio, T., Valente, A. and Vitiello, C., 2009. A STEP Compliant System for Manufacturing of Composites in the Aerospace Industry. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2009-07-06 - 2009-07-08, Teeside.

Carey, E., Culley, S., McAlpine, H., Weber, F. and Xie, Y., 2012. Key issues in the take-up of knowledge management interventions in engineering design. In: Marjanovic, D., Storga, M., Pavkovic, N. and Bojcetic, N., eds. Design 2012: Proceedings of the 12th International Design Conference, May 21-24, 2012, Dubrovnik - Croatia. Glasgow: The Design Society, pp. 1405-1414.

Carey, E., Culley, S. and Weber, F., 2013. Establishing key elements for handling in-service information and knowledge. In: Proceedings of the International Conference on Engineering Design, ICED. Vol. 6 DS75-06. , pp. 11-20.

Cash, P., Hicks, B. and Culley, S., 2009. The challenges of ethnographic design research: a methodological framework for conducting observational experiments. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Cash, P.J., Hicks, B.J. and Culley, S.J., 2013. A comparison of designer activity using core design situations in the laboratory and practice. Design Studies, 34 (5), pp. 575-611.

Cash, P.J., Hicks, B.J. and Culley, S.J., 2012. A comparison of the behaviour of student engineers and professional engineers when designing. In: Marjanovic, D., Storga, M., Pavkovic, N. and Bojcetic, N., eds. Design 2012: Proceedings of the 12th International Design Conference, May 21-24, 2012, Dubrovnik - Croatia. Glasgow: The Design Society, pp. 757-766.

Cash, P., Hicks, B. and Culley, S., 2010. An information requirement strategy for capturing and analysisng design activity and behaviour. In: 11th International Design Conference (DESIGN 2010), 2010-05-17 - 2010-05-20, Dubrovnik-Cavtat.

Cash, P., Hicks, B. and Culley, S., 2011. Designer behaviour and activity: An industrial observation method. In: International Conference on Engineering Design, ICED11, 2011-08-15 - 2011-08-18, DTU Copenhagen, Copenhagen, Denmark..

Cash, P., Hicks, B., Culley, S. and Salustri, F., 2011. Designer behaviour and activity: an industrial observation Method. In: International Conference on Engineering Design, ICED'11, 2011-08-15 - 2011-08-18, Technical University of Denmark, Copenhagen.

Chamakiotis, P., 2011. Factors influencing creativity in virtual design teams. In: ASME 2011 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), 2011-08-28 - 2011-08-31, Washington DC.

Chamakiotis, P., Dekoninck, E. A. and Panteli, N., 2014. Creativity in a 24h-long Virtual Design Team. In: European Conference on Information Systems, 2014-06-09 - 2014-06-11, Tel Aviv.

Chamakiotis, P., Dekoninck, E. and Panteli, N., 2010. Creativity in virtual design teams. In: International Design Conference, 2010-05-17 - 2010-05-20, Dubrovnik.

Chamakiotis, P., Dekoninck, E. and Panteli, N., 2011. The creativity of virtual design teams: An exploratory case study. In: Mediterranean Conference on Information Systems (MCIS), 2011-09-03 - 2011-09-05, Limassol.

Chamakiotis, P., Dekoninck, E. and Panteli, N., 2013. Factors influencing creativity in virtual design teams : An interplay between technology, teams and individuals. Creativity And Innovation Management, 22 (3), pp. 265-279.

Chauve, M., Da Cunha, C. and Maropoulos, P., 2008. Review of Trends in Production and Logistic Networks and Supply Chain Evaluation. In: Haasis, H. D., Kreowski, H. J. and Scholz-Reiter, B., eds. Dynamics in Logistics. Springer-Verlag, pp. 39-55.

Cheung, W. M., Matthews, P. C., Gao, J. X. and Maropoulos, P. G., 2008. Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12), pp. 3185-3206.

Cheung, W., Maropoulos, P. and Matthews, P. C., 2010. Linking design and manufacturing domains via web-based and enterprise integration technologies. International Journal of Computer Applications in Technology, 37 (3-4), pp. 182-197.

Cheung, W., Newnes, L., Mileham, A. R., Marsh, R. and Lanham, J., 2008. Through Life Costing in Electronic Defence Systems: An Integrated Data-Driven Multi-Level Approach. In: Xia, G. P. and Deng, X. Q., eds. Proceedings of the 38th International Conference on Computers and Industrial Engineering. Vol. 1-3. China: Publishing House Electronics Industry, pp. 2119-2128.

Cheung, W. M., Marsh, R., Newnes, L. B., Mileham, A. R. and Lanham, J. D., 2009. Standards and inference of design information in through-life costing of innovative defence electronic products. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (2), pp. 169-181.

Chunlei, L., McMahon, C. and Newnes, L., 2009. Annotation in design processes: classification of approaches. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Conway, A. P., Giess, M. D., Lynn, A., Ding, L., Goh, Y. M., McMahon, C. A. and Ion, W. J., 2008. Holistic Engineering Design: A Combined Synchronous and Asynchronous Approach. In: ASME 2008 International Design Engineering Technical Conference, Computers and Information in Engineering Conference (IDETC 2008), 2008-08-03 - 2008-08-06, Brooklyn, New York.

Crabtree, P., Dhokia, V., Ansell, M. and Newman, S., 2008. A Framework for the Manufacture of Personalised Sport Orthotic Insoles. In: 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2008-06-30 - 2008-07-02, Skövde.

Crabtree, P., Dhokia, V., Newman, S. and Ansell, M., 2009. Manufacturing methodology for personalised symptom-specific sports insoles. Robotics and Computer-Integrated Manufacturing, 25 (6), pp. 972-979.

Cranston, G. and Hammond, G., 2010. North and South: Regional footprints on the transition pathway to a low carbon, global economy. Applied Energy, 87 (9), pp. 2945-2951.

Crick, T., Dunning, P., Kim, H. A. and Padget, J., 2009. Engineering design optimization using services and workflows. Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences, 367 (1898), pp. 2741-2751.

Cripps, R. J. and Mullineux, G., 2014. Design of free-form motions. In: Tools and Methods for Competitive Engineering (TMCE) 2014, 2014-05-19 - 2014-05-23, Budapest.

Cunha, P. F. and Maropoulos, P. G., 2008. Digital enterprise technology: perspectives and future challenges. International Journal of Computer Integrated Manufacturing, 21 (2), pp. 125-126.

D

Dai, J. S., Medland, A. J. and Mullineux, G., 2009. Carton erection using reconfigurable folder mechanisms. Packaging Technology and Science, 22 (7), pp. 385-395.

Dai, W., Maropoulos, P.G. and Zhao, Y., 2013. Forthcoming. Reliability modelling and verification of manufacturing processes based on process knowledge management. International Journal of Computer Integrated Manufacturing

Dai, W., Zhang, C., Maropoulos, P. G. and Zhao, Y., 2013. Research on reliability evaluation of reconfigurable manufacturing system. In: Proceedings of International Conference on Computers and Industrial Engineering, CIE. Vol. 1. , pp. 431-439.

Darlington, M. J., Culley, S. J., Zhao, Y., Austin, S. A. and Tang, L. C. M., 2008. Defining a framework for the evaluation of information. International Journal of Information Quality, 2 (2), pp. 115-132.

Darlington, M., 2011. Project Data Management Plan Template for IdMRC Projects. Other. University of Bath. (ERIM Project Document; erim0too110329mjd10)

Darlington, M., 2011. Project Data Record Manifest Template for IdMRC Projects. Other. University of Bath. (ERIM Project Document; erim0too110330mjd10)

Darlington, M., 2012. Project Data Record Manifest Template for Research Projects. Other. Bath, UK: University of Bath.

Darlington, M., 2011. RAID Associative Tool Use Cases. Other. University of Bath. (ERIM Project Document; erim6rep101125mjd10)

Darlington, M., 2011. Understanding the CRYMAN Project Data Case. Other. University of Bath. (ERIM Project Document; erim7rep110314mjd)

Darlington, M. and Ball, A., 2012. A Research Data Management Plan for Engineering Research. Other. Bath, UK: University of Bath.

Darlington, M. and Ball, A., 2012. A Research Data Management Plan for the Department of Mechanical Engineering, University of Bath. Other. Bath, UK: University of Bath.

Darlington, M. and Ball, A., 2012. Infrastructure Supporting a Research Data Management Plan for the Department of Mechanical Engineering, University of Bath. Other. Bath, UK: University of Bath.

Darlington, M. and Ball, A., 2012. Naming Documents for Better Organization. Other. Bath, UK: University of Bath.

Darlington, M. and Ball, A., 2012. Research Data Management Plan Requirements Specification for the Department of Mechanical Engineering, University of Bath. Other. Bath: University of Bath.

Darlington, M., Ball, A., Howard, T., Culley, S. and McMahon, C., 2010. Principles for Engineering Research Data Management. Other. University of Bath.

Darlington, M., Ball, A., Howard, T., Culley, S. and McMahon, C., 2011. RAID Associative Tool Requirements Specification. Other. University of Bath. (ERIM Project Document; erim6rep101111mjd10)

Darlington, M., Ball, A., Howard, T., Culley, S. and McMahon, C., 2010. The Draft IdMRC Projects Data Management Plan. Other. University of Bath. (ERIM Project Document; erim6rep101015mjd10)

Darlington, M., Ball, A., Thangarajah, U., McMahon, C. and Lyon, E., 2011. REsearch Data management for Mechanical Engineering Departments (REDm-MED). In: JISC Managing Research Data Launch Meeting, 2011-12-01 - 2011-12-02, NCL Conference Centre, Nottingham.

Darlington, M., Howard, T., Ball, A., Culley, S. and McMahon, C., 2011. Data management planning in engineering design and manufacturing research. In: ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. Vol. 6. The Design Society, pp. 65-75.

Darlington, M., Thangarajah, U. and Ball, A., 2012. RAIDmap Application User Guide. Other. Bath, UK: University of Bath.

Debode, A.B.O., Nassehi, A., Newnes, L. B. and Newman, S. T., 2013. STEP-NC compliant manufacturing cost estimation system for CNC milled part component. In: Proceedings of the 37th International MATADOR 2012 Conference. Springer-Verlag, pp. 53-56.

Dekoninck, E., 2012. Enhancing the innovation skills in engineering students. In: Buck, L., Frateur, G., Ion, W., McMahon, C., Baelus, C., De Grande, C. and Vervulgen, S., eds. Design Education for Future Wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Artesis University College, Antwerp, Belgium 6th-7th September 2012. Glasgow: The Design Society, pp. 431-436.

Dekoninck, E. and Howard, T., 2009. Comparing the effectiveness of TRIZ stimuli with three other creative stimuli tools in company brainstorming sessions. In: UK TRIZ Forum, 2009-05-14, Clevedon, Bristol.

Dhokia, V., Crabtree, P., Newman, S., Ansell, M. and Mileham, A., 2008. The Development of Cryogenic Machining Knowledge. In: 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2008-06-30 - 2008-07-02, Skövde.

Dhokia, V., Nassehi, A., Wolf, S.A. and Newman, S. T., 2013. Cryogenic CNC machining of individualised packaging. In: 37th International MATADOR 2012 Conference, 2012-07-25 - 2012-07-27, Manchester.

Dhokia, V. G., Kumar, S., Vichare, P., Newman, S. T. and Allen, R. D., 2008. Surface roughness prediction model for CNC machining of polypropylene. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (2), pp. 137-153.

Dhokia, V., Crabtree, P., Newman, S. and Ansell, M., 2009. A methodology for the determination of foamed polymer contraction rates for the cryogenic manufacture for shoe insoles. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2009-07-06 - 2009-07-08, Teeside.

Dhokia, V., Shokrani Chaharsooghi, A., Correa Paulino, D. and Newman, S., 2012. Effect of Cryogenic Cooling on the Surface Quality and Tool Wear in End Milling 6061-T6 Aluminium. In: 22nd International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2012), 2012-06-10 - 2012-06-13, Helsinki.

Dhokia, V., Shokrani Chaharsooghi, A. and Newman, S., 2012. Cryogenic Machining of Carbon Fibre. In: 12th International Conference of the European Society for Precision Engineering & Nanotechnology, 2012-06-04 - 2012-06-08, Stockholm.

Dhokia, V., Shokrani Chaharsooghi, A. and Newman, S., 2012. Study of Cryogenics in CNC Milling of Metal Alloys. In: International Chemnitz Manufacturing Colloquium in association with the 2nd International Colloquium of the Cluster of Excellenz eniPROD, 2012-04-17 - 2012-04-18, Chemnitz.

Dhokia, V., Zhu, Z., Shokrani, A. and Newman, S., 2011. A novel method for rapid part inspection and verification. In: Proceedings of the 11th Euspen International Conference. Vol. 2. Bedford: Euspen, pp. 340-343.

Dhokia, V. G., Kumar, S., Vichare, P. and Newman, S. T., 2008. An intelligent approach for the prediction of surface roughness in ball-end machining of polypropylene. Robotics and Computer-Integrated Manufacturing, 24 (6), pp. 835-842.

Dhokia, V. G., Newman, S. T., Crabtree, P. and Ansell, M. P., 2010. A methodology for the determination of foamed polymer contraction rates as a result of cryogenic CNC machining. Robotics and Computer-Integrated Manufacturing, 26 (6), pp. 665-670.

Ding, L., 2011. Forthcoming. Book review: Mass customization: engineering and managing global operations. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Ding, L., Ball, A., Matthews, J., McMahon, C. and Patel, M., 2009. Annotation of lightweight formats for long-term product representations. International Journal of Computer Integrated Manufacturing, 22 (11), pp. 1037-1053.

Ding, L., Ball, A., Patel, M., Matthews, J. and Mullineux, G., 2009. Strategies for the Collaborative Use of CAD Product Models. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Ding, L., Ball, A., Patel, M., Matthews, J. and Mullineux, G., 2009. ‘PLM on a budget’: Lightweight lifecycle solutions for small enterprises. In: The 6th International Conference on Product Lifecycle Management, 2009-07-06 - 2009-07-08, University of Bath, Bath.

Ding, L., Davies, D. and McMahon, C. A., 2008. Sharing Information throughout a Product Lifecycle via Markup of Product Model. In: ASME 2008 International Design Engineering Technical Conference, Computers and Information in Engineering Conference (IDETC/CIE 2008),, 2008-08-03 - 2008-08-06, Brooklyn, New York.

Ding, L., Davies, D. and McMahon, C. A., 2009. The integration of lightweight representation and annotation for collaborative design representation. Research in Engineering Design, 19 (4), pp. 223-238.

Ding, L., Giess, M., Goh, Y. M., McMahon, C. and Thangarajah, U., 2009. Component-based Records: a Novel Method to Record Transaction Design Work. Advanced Engineering Informatics, 23 (3), pp. 332-347.

Ding, L. and Liu, S., 2010. Markup in engineering design : A discourse. Future Internet, 2 (1), pp. 74-95.

Ding, L. and Matthews, J., 2009. A contemporary study into the application of neural network techniques employed to automate CAD/CAM integration for die manufacture. Computers and Industrial Engineering, 57 (4), pp. 1457-1471.

Ding, L., Matthews, J., Feldman, J. and Mullineux, G., 2010. Constraint modelling of food processing systems. Food Manufacturing Efficiency, 3 (1), pp. 15-23.

Ding, L., Matthews, J., McMahon, C. and Mullineux, G., 2009. An information support approach for machine design & building companies. Concurrent Engineering: Research and Applications, 17 (2), pp. 103-109.

Ding, L., Matthews, J., McMahon, C. and Mullineux, G., 2008. ExProMod, a Product Development Support Tool. Advanced Materials Research, 44-46, pp. 345-353.

Ding, L., Matthews, J. and Mullineux, G., 2009. ANNACON: Annotation with Constraints to Support Design. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Ding, L., Matthews, J. and Mullineux, G., 2011. Capturing constraint evolution : A technique to preserve and handle design knowledge. International Journal of Product Development, 15 (1/2/3), pp. 135-155.

Ding, L., Matthews, J. and Mullineux, G., 2010. Preservation of design knowledge by capture and use of constraints evolution. In: Horvath, I., Mandorli, F. and Rusak, Z., eds. Tools and Methods of Competitive Engineering. Vol. 1. Delft: Delft University of Technology, pp. 383-395.

Ding, L., Matthews, J. and Mullineux, G., 2011. Support for design knowledge management and sharing using XML. In: Kutais, B. G., ed. Internet Policies and Issues. Volume 8. Vol. 8. Hauppauge NY, USA: Nova Science, pp. 37-67.

Ding, L., Qiu, X. L., Mullineux, G. and Matthews, J., 2010. The development of the sustainable manufacturing processes. In: Xie, L. Y., James, M. N., Zhao, Y. X. and Qian, W. X., eds. Materials and Product Technologies. Vol. 118-120. Zurich: Trans Tech, pp. 767-774. (Advanced Materials Research)

Drew, B., Barker, M., Edge, K., Darling, J. and Owen, G. W., 2006. Experimental evaluation of a hydraulically actuated tilt system for a narrow track three-wheeled vehicle. In: 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, 2006-11-05 - 2006-11-10, Chicargo.

Dunning, P., Kim, H. A. and Mullineux, G., 2008. Error analysis of fixed grid formulation for boundary based structural optimisation. In: 7th ASMO UK / ISSMO conference on Engineering Design Optimization, 2008-07-07 - 2008-07-08, Bath.

Dunning, P., Kim, H. A. and Mullineux, G., 2009. Introducing Loading Uncertainty in Topology Optimization. In: PLATO-N International Workshop: Advances in Topology and Material Optimization - Methods and Industrial Applications, 2009-09-01, Lyngby.

Dunning, P., Kim, H. A. and Mullineux, G., 2008. Two-dimensional fixed grid based finite element structural analysis. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2008-09-10 - 2008-09-12, Victoria, British Columbia.

Dunning, P. D., Kim, H. A. and Mullineux, G., 2009. Introducing isoparametric fixed grid analysis for boundary based topology optimization. In: 10th US National Congress on Computational Mechanics, 2009-07-16 - 2009-07-19, Columbus, Ohio.

Dyer, C. H., Hammond, G. and McKenna, R. C., 2008. Engineering sustainability: energy efficiency, thermodynamic analysis and the industrial sector. In: International Conference on Engineering Sustainability, 2008-10-31 - 2008-11-02, Perth.

Dyer, C. H., Hammond, G. P., Jones, C. and Mckenna, R. C., 2008. Enabling technologies for industrial energy demand management. Energy Policy, 36 (12), pp. 4434-4443.

E

Edmunds, R., Feldman, J., Hicks, B. and Mullineux, G., 2008. Smooth curves and motions defined and optimised using point-based techniques. In: 10th International Design Conference, Design 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

Edmunds, R., Feldman, J. A., Hicks, B. J. and Mullineux, G., 2011. Constraint-based modelling and optimization to support the design of complex multi-domain engineering problems. Engineering with Computers, 27 (4), pp. 319-336.

Edmunds, R., Hicks, B. J. and Mullineux, G., 2010. Drawing parallels: modelling geological phenomena using constraint satisfaction. Journal of Structural Geology, 32 (7), pp. 997-1008.

Edmunds, R., Hicks, B. J. and Mullineux, G., 2011. Using constraint satisfaction as a means for modelling parallel folding evolution. IMA Journal of Applied Mathematics, 76 (1), pp. 169-192.

Elias, E., Chamakiotis, P., Howard, T., Dekoninck, E. and Culley, S., 2011. Can a virtual design environment enhance group creativity and the use of stimuli? In: International Conference on Research into Design (ICoRD '11), 2011-01-10 - 2011-01-12, Bangalore.

Elias, E., Dekoninck, E. and Culley, S., 2008. Assessing User Behaviour for Changes in the Design of Energy Using Domestic Products. In: IEEE International Symposium on Electronics and the Environment (ISEE 2008), 2008-05-19 - 2008-05-22, San Francisco.

Elias, E., Dekoninck, E. and Culley, S., 2008. Prioritisation Methodology for the User-Centred Design of Energy Using Domestic Products. In: International Design Conference - DESIGN 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

Elias, E., Dekoninck, E. and Culley, S., 2009. Quantifying the Energy Impacts of Use: A Product Energy Profile Approach. In: 16th CIRP International Conference on Life Cycle Engineering, 2009-05-04 - 2009-05-06, Cairo.

Elias, E., Orme, M., Dekoninck, E. and Culley, S., 2009. A Morphological Design Approach to User-Efficient Design. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Elias, E. W. A., Dekoninck, E. and Culley, S. J., 2009. Designing for ‘use phase’ energy losses of domestic products. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (1), pp. 115-120.

Eng, N., Bracewell, R. H., Clarkson, P. J., Giess, M., McMahon, C., Conway, A. P. and Ionicioiu, W. J., 2008. Comparing and integrating methods of design activity documentation across synchronous and asynchronous modes of collaborative work. In: 7th NordDesign Conference 2008, 2008-08-21 - 2008-08-23, Tallinn University of Technology, Tallinn.

F

Feldman, J., Edmunds, R., Hicks, B. and Mullineux, G., 2009. A rule based approach for inverse kinematic design and optimisation. In: ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2009-08-30 - 2009-09-02, San Diego, CA.

Feldman, J., Edmunds, R., Hicks, B. and Mullineux, G., 2008. Use of numerical methods for constraint-based design and optimization. In: Tools and Methods for Competitive Engineering (TMCE) 2008, 2008-04-01, Izmir.

Feldman, J., Hicks, B. and Mullineux, G., 2014. Forthcoming. Mechanism synthesis : A comparison of adaptive and traditional approaches. International Journal of Information Technology and Management, 13 (2/3), pp. 216-241.

Feldman, J., Hicks, B. J. and Mullineux, G., 2012. Optimization methods for mechanism synthesis: a comparison. In: Horváth, I., Rusák, Z., Albers, A. and Behrendt, M., eds. Tools and Methods of Competitive Engineering - TMCE 2012. Delft: Delft University of Technology, pp. 767-776.

Ferioli, M., Dekoninck, E., Roussel, B., Renaud, J. and Culley, S., 2008. Subjectivity in early Idea-evaluation for Innovation. In: European Symposium on Innovative Management Practices (ERIMA'08), 2008-11-06 - 2008-11-07, Porto.

Ferri, C., Faraway, J. and Brousseau, E., 2010. Calibration of a white light interferometer for the measurement of micro-scale dimensions. The International Journal of Advanced Manufacturing Technology, 47 (1-4), pp. 125-135.

Ferri, C., Jamshidi, J., Loftus, C. and Maropoulos, P., 2010. Design of an information system for metrology contents. In: Huang, G. Q., Mak, K. L. and Maropoulos, P. G., eds. Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Vol. 66. Springer-Verlag, pp. 957-970. (Advances in Intelligent and Soft Computing)

Ferri, C., Mastrogiacomo, L. and Faraway, J., 2010. Sources of variability in the set-up of an Indoor GPS. International Journal of Computer Integrated Manufacturing, 23 (6), pp. 487-499.

Frasson, L., Parittotokkaporn, T., Schneider, A., Davies, B. L., Vincent, J. F., Huq, S. E., Degenaar, P. and Baena, F. M. R., 2008. Biologically inspired microtexturing: Investigation into the surface topography of next-generation neurosurgical probes. In: 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08, 2008-08-20 - 2008-08-25, Vancouver, BC.

Fu, Z., Valentine, R. M. and Mullineux, G., 2014. Modelling the string-bed of a tennis racquet using energy. In: Tool and Methods of Competitive Engineering (TMCE) 2014, 2014-05-19 - 2014-05-23, Budapest.

G

Giess, M., McMahon, C., Booker, I. D. and Stewart, D., 2009. Application of faceted classification in the support of manufacturing process selection. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (6), pp. 597-608.

Giess, M., Wild, P. J. and McMahon, C., 2008. The generation of faceted classification schemes for use in the organisation of engineering design documents. International Journal of Information Management, 28 (5), pp. 379-390.

Giess, M., Zhao, Y., Darlington, M., Culley, S. and McMahon, C., 2010. Organising and contextualising Engineering Business Information through the application of faceted classification. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. New York: ASME, pp. 1025-1032.

Goh, Y. M., Giess, M. and McMahon, C., 2009. Facilitating design learning through faceted classification of in-service information. Advanced Engineering Informatics, 23 (4), pp. 497-511.

Goh, Y. M., Newnes, L., McMahon, C., Mileham, A. and Paredis, C., 2010. A framework for considering uncertainty in quantitative Life Cycle cost estimation. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 8. New York: ASME, pp. 3-13.

Goh, Y. M., Newnes, L. B., Mileham, A. R., McMahon, C. A. and Saravi, M. E., 2010. Uncertainty in through-life costing-review and perspectives. IEEE Transactions on Engineering Management, 57 (4), pp. 689-701.

Goh, Y.-M. and McMahon, C., 2009. Improving reuse of in-service information capture and feedback. Journal of Manufacturing Technology Management, 20 (5), pp. 626-639.

Goh, Y.-M., McMahon, C. and Booker, J., 2009. Improved utility and application of probabilistic methods for reliable mechanical design. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 223 (3), pp. 199-214.

Gopsill, J., McAlpine, H. and Hicks, B., 2011. Learning from the lifecycle: The capabilities and limitations of current product lifecycle practice and systems. In: International Conference on Engineering Design, ICED11, 2011-08-15 - 2011-08-18, DTU Copenhagen, Copenhagen, Denmark..

Gopsill, J., McAlpine, H. and Hicks, B., 2011. Learning from the lifecycle: The current capabilities and limitations of product lifecycle practice and systems. In: International Conference on Engineering Design ICED'11, 2011-08-15 - 2011-08-18, Copenhagen.

Gopsill, J., McAlpine, H. and Hicks, B., 2011. Trends in technology and their possible implications on PLM: Looking towards 2020. In: 8th International Conference on Project LifeCycle Management (PLM 11), 2011-07-11 - 2011-07-13, University of Eindhoven.

Griffiths, K., Hicks, B., Keogh, P., Shires, D. and Sheppard-Fidler, S., 2011. Simulating the transport environment for packaging testing using a multi degree of freedom method. In: International Safe Transit Association, 2011 International Transport Packaging Forum, 2011-04-18 - 2011-04-21, Orlando USA.

Griffiths, K., Hicks, B., Keogh, P., Shires, D. and Sheppard-Fidler, S., 2010. Using supermarket home delivery system to evaluate and improve vibration simulation within the packaging design process. In: 17th IAPRI World Conference on Packaging, International Association of Packaging Research Institutes, 2010-10-10, Tianjian.

Guo, Y., Owen, G., Liu, W., Maropoulos, P. and Mileham, A., 2008. Application of Particle Swarm Optimisation Approach to Integrate Process Planning and Scheduling. In: Proceedings of 5th International Conference on Digital Enterprise Technology, 2008-10-22 - 2008-10-24, Nantes.

Guo, Y. W., Li, W. D., Mileham, A. R. and Owen, G. W., 2009. Optimisation of integrated process planning and scheduling using a particle swarm optimisation approach. International Journal of Production Research, 47 (14), pp. 3775-3796.

Guo, Y. W., Liu, W. D., Mileham, A. R. and Owen, G. W., 2009. Applications of particle swarm optimisation in integrated process planning and scheduling. Robotics and Computer-Integrated Manufacturing, 25 (2), pp. 280-288.

Guo, Y. W., Mileham, A. R., Owen, G. W., Maropoulos, P. G. and Li, W. D., 2009. Operation sequencing optimization for five-axis prismatic parts using a particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (5), pp. 485-497.

H

Hammond, G. P., Kallu, S. and McManus, M. C., 2008. Development of biofuels for the UK automotive market. Applied Energy, 85 (6), pp. 506-515.

Hammond, G., Harajli, H., Jones, C. I. and Winnett, A., 2009. Integrated appraisal of a Building Integrated Photovoltaic (BIPV) System. In: 2009 International Conference on Sustainable Power Generation and Supply. New York: IEEE, pp. 1166-1174.

Hammond, G. and Jones, C. I., 2010. Embodied carbon: the concealed impact of residential construction. In: Global Warming: Engineering Solutions. New York: Springer, pp. 367-384. (Green Energy and Technology)

Hammond, G., McKenna, R. and Norman, J., 2009. Thermodynamic analysis of the UK industrial sector. In: 5th European Conference on Economics and Management of Energy in Industry (ECEMEI-5), 2009-04-14 - 2009-04-17, Vilamoura, Algarve.

Hammond, G., McManus, M. and Mezzullo, W., 2008. A bioenergy resource assessment for the south west of England. Proceedings of the Institution of Civil Engineers - Energy, 161 (4), pp. 159-173.

Hammond, G. P. and Jones, C. I., 2008. Embodied energy and carbon in construction materials. Proceedings of the Institution of Civil Engineers - Energy, 161 (2), pp. 87-98.

Hammond, G. P. and Waldron, R., 2008. Risk assessment of UK electricity supply in a rapidly evolving energy sector. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (7), pp. 623-642.

Hardwick, M., Zhao, Y.F., Proctor, F.M., Nassehi, A., Xu, X., Venkatesh, S., Odendahl, D., Xu, L., Hedlind, M., Lundgren, M., Maggiano, L., Loffredo, D., Fritz, J., Olsson, B., Garrido, J. and Brail, A., 2013. A roadmap for STEP-NC-enabled interoperable manufacturing. The International Journal of Advanced Manufacturing Technology, 68 (5-8), pp. 1023-1037.

Heilemann, M., Culley, S.J., Schlüter, M. and Haase, H.-J., 2013. Examination of modularization metrics inindustry. In: Proceedings of the International Conference on Engineering Design, ICED. Vol. 4 DS75-04. , pp. 427-436.

Hicks, B. J., Mullineux, G., Matthews, J. and Medland, A. J., 2008. Constraint-based design of forming shoulders. In: TMCE 2008 7th international symposium on Tools and Methods for Competitive Engineering, 2008-04-21 - 2008-04-25, Izmir.

Hicks, B., 2009. Design of industrial information systems. International Journal of Production Research, 47 (9), pp. 2533-2534.

Hicks, B., Dong, A., Palmer, R. and Mcalpine, H. C., 2008. Organizing and managing personal electronic files: A mechanical engineer's perspective. ACM Transactions on Information Systems, 26 (4), 23.

Hicks, B. and Larsson, A., 2009. A methodology for evaluating technology readiness during product development. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Hicks, B. and Matthews, J., 2012. Realizing sustainable process improvement through an understanding of machine–material interaction: part 2 – an industrial case study. Journal Of Process Mechanical Engineering - Part E, 226 (1), pp. 29-49.

Hicks, B. and Matthews, J., 2009. Understanding Machine-Material Interaction: A Practitioner's Guide. University of Bath.

Hicks, B. and Matthews, J., 2009. Understanding Machine-Material Interaction: An Illustrated Workbook. University of Bath.

Hicks, B., McAlpine, H., Torlind, P., Storga, M. and Dong, A., 2008. The issues and benefits of an intelligent design observatory. In: Design 2008, 2008-05-01, Dubrovnik.

Hicks, B., Mcalpine, H., Torling, P., Storga, M., Blanco, E., Montagna, F. and Cantamessa, M., 2009. An intelligent design environment – overcoming fundamental barriers to realising a step change in design performance and innovation. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Hicks, B. J. and Matthews, J., 2012. Realizing sustainable process improvement through an understanding of machine-material interaction: part 1 - a methodology for audit, investigation, and improvement. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 226 (1), pp. 12-28.

Hicks, B. J. and Matthews, J., 2010. The barriers to realising sustainable process improvement: A root cause analysis of paradigms for manufacturing systems improvement. International Journal of Computer Integrated Manufacturing, 23 (7), pp. 585-602.

Hicks, B. J., Mullineux, G. and Sirkett, D., 2009. A Finite Element-Based Approach for Whole-System Simulation of Packaging Systems for their Improved Design and Operation. Packaging Technology and Science, 22 (4), pp. 209-227.

Hillis, A. and Mullineux, G., 2012. Cost reduction and product innovation with Stock Redler. University of Bath.

Howard, T., Culley, S. and Dekoninck, E., 2008. Creative stimulation in conceptual design: An analysis of industrial case studies. In: ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE), 2008-08-03 - 2008-08-06, Brooklyn, NY.

Howard, T., Culley, S. and Dekoninck, E., 2008. Idea generation in conceptual design. In: 10th International Design Conference, Design 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

Howard, T., Culley, S. and Dekoninck, E., 2009. Stimulating Creativity: A more practical alternative to TRIZ. In: 17th International Conference on Engineering Design, ICED'09, 2009-04-24 - 2009-04-27, Stanford, California.

Howard, T., Culley, S. and Dekoninck, E., 2009. The differentiation and integration of the systems levels of design and the design activity process to aid the positioning of creativity support tools. In: International Conference on Research into Design (ICoRD '09), 2009-01-07 - 2009-01-09, Bangalore.

Howard, T., Darlington, M., Ball, A., Culley, S. and McMahon, C., 2010. Opportunities for and Barriers to Engineering Research Data Re-use. Other. Bath, UK: University of Bath. (ERIM Project Document; ERIM Project Documen)

Howard, T., Darlington, M., Ball, A., Culley, S. and McMahon, C., 2010. Understanding and Characterizing Engineering Research Data for its Better Management. Other. Bath, UK: University of Bath. (ERIM Project Document; ERIM Project Documen)

Howard, T. J., Culley, S. J. and Dekoninck, E. A., 2008. Describing the creative design process by the integration of engineering design and cognitive psychology literature. Design Studies, 29 (2), pp. 160-180.

Huang, G. Q., Fang, M. J., Lu, H., Dai, Q. Y., Liu, W. and Newman, S., 2009. RFID-Enabled Real-Time Mass-Customized Production Planning and Scheduling. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2009-07-06 - 2009-07-08, Teeside.

Huang, G. Q., Wright, P. K. and Newman, S. T., 2009. Wireless manufacturing : A literature review, recent developments, and case studies. International Journal of Computer Integrated Manufacturing, 22 (7), pp. 579-594.

Huang, G. Q., Zhang, Y. F., Chen, X. and Newman, S., 2008. RFID-enabled real-time wireless manufacturing for adaptive assembly planning and control. Journal of Intelligent Manufacturing, 19 (6), pp. 701-713.

Huang, X. X., Newnes, L. B. and Parry, G. C., 2012. The adaptation of product cost estimation techniques to estimate the cost of service. International Journal of Computer Integrated Manufacturing, 25 (4-5), pp. 417-431.

I

Imani Asrai, R., Newman, S. and Nassehi, A., 2009. A power consumption model for slot generation with a CNC milling machine. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2009-07-06 - 2009-07-08, Teeside.

J

Jauch, S. Y., Ng, L. V., Peirce, S. R., Dhokia, V., Miles, A. W. and Gill, H. S., 2013. The assembly load influences the fretting behaviour at taper interfaces of modular hip prostheses: an in vitro study. In: 8th Combined Meeting of Orthopaedic Research Societies, 2013-10-13 - 2013-10-16, Venice.

Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C. and Bowyer, A., 2011. RepRap – the replicating rapid prototyper. Robotica, 29 (01), pp. 177-191.

K

Kaur, S., Mullineux, G. and Matthews, J., 2010. Perception of constraints in conceptual design within the automotive industry. In: 2nd International Conference on Advances in Product Development and Reliability (PDR2010), 2010-07-01, Shenyang.

Keay, M. and Newnes, L., 2006. Machinery safety education at the University of Bath. In: Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006, EE 2006. , pp. 502-506.

Keogh, P., Sahinkaya, M. N., Burrows, C. and Cade, I., 2008. Rotor/auxiliary bearing dynamic contact modes in magnetic bearing systems. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 16 (4), pp. 266-271.

Kreye, M. E., Goh, Y. M. and Newnes, L. B., 2010. Information display for decisions under uncertainty. In: 11th International Design Conference (DESIGN 2010), 2010-05-17 - 2010-05-20, Dubrovnik-Cavtat.

Kreye, M. E., Goh, Y. M. and Newnes, L. B., 2009. Uncertainty in through life costing within the concept of product service systems: a game theoretic approach. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Kreye, M.E., Goh, Y. M. and Newnes, L. B., 2012. Modelling uncertainty in competitive bidding. In: ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012, 2012-08-12 - 2012-08-12, Chicago, IL.

Kreye, M., Goh, Y.-M. and Newnes, L., 2011. Manifestation of uncertainty - A classification. In: International Conference on Engineering Design, ICED11, 2011-08-15 - 2011-08-18, DTU Copenhagen, Copenhagen, Denmark..

Kreye, M., Newnes, L. and Goh, Y. M., 2011. Uncertainty in pricing decisions in competitive bidding for service contracts. In: International Conference on Engineering Design, ICED11, 2011-08-15 - 2011-08-18, DTU Copenhagen, Copenhagen, Denmark..

Kreye, M., Newnes, L. and Goh, Y.-M., 2011. Uncertainty analysis and its application to service contracts. In: ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, 2011-08-28 - 2011-08-31, Washington, DC.

Kreye, M., Newnes, L. B. and Goh, Y.-M., 2013. Information availability at the competitive bidding stage for service contracts. Journal of Manufacturing Technology Management, 24 (7), pp. 976-997.

Kreye, M. E., Newnes, L. B. and Goh, Y.-M., 2014. Uncertainty in competitive bidding : A framework for product-service systems. Production Planning and Control, 25 (6), pp. 462-477.

Kumar, S., Nassehi, A. and Newman, S., 2008. Towards the Realisation of Intelligence in Manufacturing. In: 5th CIRP International Conference on Digital Enterprise Technology (DET 2008), 2008-10-22 - 2008-10-24, Nantes.

Kumar, S., Nassehi, A. and Newman, S. T., 2008. Standardized Position Axial Deviation Model for Dimension Variation Control in CNC Manufacturing. In: Xia, G. P. and Deng, X. Q., eds. 38th International Conference on Computers and Industrial Engineering, 2008-10-31 - 2008-11-02, Beijing.

Kumar, S., Nassehi, A., Vichare, P. and Newman, S., 2008. The Standardisation of Process Control for CNC Manufacturing. In: 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2008-06-30 - 2008-07-02, Skövde.

Kumar, S., Vichare, P., Nassehi, A., Dhokia, V. and Newman, S., 2009. Design and implementation of machine tool static error feedback model. In: IEEM 2009 - IEEE International Conference on Industrial Engineering and Engineering Management, 2009-12-08 - 2009-12-11, Hong Kong.

L

Lee, C. C., Stammers, C. W. and Mullineux, G., 2009. On the historical overview of geometric algebra for kinematics of mechanisms. In: Yan, H.-S. and Ceccarelli, M., eds. International Symposium on History of Machines and Mechanisms, Proceedings of HMM 2008. Vol. 4. Dordrecht, Netherlands: Springer Netherlands, pp. 21-34. (History of Mechanism and Machine Science)

Leonard, L., Sirkett, D. M., Langdon, I. J., Mullineux, G., Tilley, D. G., Keogh, P. S., Cunningham, J. L., Cole, M. O. T., Prest, P. H., Miles, A. W. and Giddins, G. E. B., 2002. Engineering a new wrist joint replacement prosthesis - A multidisciplinary approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (9), pp. 1297-1302.

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2008. Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin.

Lewis, P., Wilson, M., Lock, G. D. and Owen, J. M., 2009. Effect of radial location of nozzles on performance of preswirl systems : a computational and theoretical study. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (2), pp. 179-190.

Li, C.L., McMahon, C. and Newnes, L., 2013. Supporting multiple engineering viewpoints in computer-aided design using ontology-based annotations. In: Proceedings of the International Conference on Engineering Design, ICED. Vol. 6 DS75-06. , pp. 249-258.

Li, C., McMahon, C. and Newnes, L., 2010. Annotation in product lifecycle management: a review of approaches. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 2. New York: ASME, pp. 797-806.

Li, L., Huang, G. Q. and Newman, S. T., 2008. A cooperative coevolutionary algorithm for design of platform-based mass customized products. Journal of Intelligent Manufacturing, 19 (5), pp. 507-519.

Liang, H., Mullineux, G. and Hammond, G., 2008. A Constraint-based Approach to Sustainable Design and Development. In: Roosimolder, L., ed. 7th NordDesign Conference 2008, 2008-08-21 - 2008-08-23, Tallinn University of Technology, Tallinn.

Lin, H., Fan, Y. and Newman, S., 2009. Manufacturing process analysis with support of workflow modelling and simulation. International Journal of Production Research, 47 (7), pp. 1773-1790.

Liu, S., McMahon, C. A. and Culley, S. J., 2008. A review of structured document retrieval (SDR) technology to improve information access performance in engineering document management. Computers in Industry, 59 (1), pp. 3-16.

Liu, S., McMahon, C., Darlington, M. J., Culley, S. J. and Wild, P. J., 2008. An automatic mark-up approach for structured document retrieval in engineering design. The International Journal of Advanced Manufacturing Technology, 38 (3-4), pp. 418-425.

Liu, S., Young, R. I. M. and Ding, L., 2011. An integrated decision support framework for global supply chain co-ordination in automotive industry. International Journal of Computer Integrated Manufacturing, 24 (4), pp. 285-301.

Liu, W. and Butler, R., 2008. Buckling optimization for composite panels with elastic tailoring. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2008-04-07 - 2008-04-10, Schaumburg, IL.

Liu, W., Butler, R. and Kim, H. A., 2008. Optimization of composite stiffened panels subject to compression and lateral pressure using a bi-level approach. Structural and Multidisciplinary Optimization, 36 (3), pp. 235-245.

Lobato, H., Ferri, C., Faraway, J., Orchard, N. and , R.-R. p., P., 2009. Uncertainty due to experimental conditions in co-ordinate measuring machines. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (5), pp. 499-509.

Lock, G., Holland, E. C., Cranston, G., Kakade, V., Lewis, P. and Pilbrow, R. G., 2009. Boundary layers explained : An undergraduate laboratory using an aerofoil with leading-edge slat. International Journal of Mechanical Engineering Education, 37 (1), pp. 45-66.

Loftus, C., Hicks, B. and McMahon, C., 2009. Capturing key relationships and stakeholders over the product lifecycle: an email based approach. In: 6th International Conference on Project LifeCycle Management (PLM 09), 2009-07-06 - 2009-07-08, Bath.

Loftus, C., Hicks, B. and McMahon, C. A., 2009. How can we support engineering processes using semantic elements in emails. In: European Conference on Computer Supported Cooperative Work, 2009-09-07 - 2009-09-09, Vienna.

Loftus, C., McMahon, C. and Hicks, B., 2008. Issues and challenges for improving email use in engineering design. In: NordDesign 2008, 2008-08-21 - 2008-08-23, Tallinn University of Technology, Tallinn.

Long, H., Gery, D., Carlier, A. and Maropoulos, P., 2009. Prediction of welding distortion in butt joint of thin plates. Materials & Design, 30 (10), pp. 4126-4135.

M

Maisano, D. A., Jamshidi, J., Franceschini, F., Maropoulos, P. G., Mastrogiacomo, L., Mileham, A. R. and Owen, G. W., 2009. A comparison of two distributed large-volume measurement systems: the mobile spatial co-ordinate measuring system and the indoor global positioning system. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (5), pp. 511-521.

Maisano, D. A., Jamshidi, J., Franceschini, F., Maropoulos, P., Mastrogiacomo, L., Mileham, A. and Owen, G. W., 2008. Indoor GPS: system functionality and initial performance evaluation. International Journal of Manufacturing Research, 3 (3), pp. 335-349.

Mann, D., Shahad, A., Filmore, P. and Dekoninck, E., 2009. From Computer-Aided Invention To Computer-Aided Innovation. In: 11th International TRIZ Conference (TRIZCON2009), 2009-03-16 - 2009-03-18, Woodland Hills, CA.

Maropoulos, P. G., 2008. Special issue on multi-material micromanufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (1), I-I.

Maropoulos, P. G., 2014. Emerging LVM capabilities, industrial requirements and roadmapping. In: (LVMC) Large Volume Metrology Conference & Exhibition, 2013, 2013-09-10 - 2013-09-11, Manchester.

Maropoulos, P. G., Muelaner, J. E., Summers, M. D. and Martin, O. C., 2014. A new paradigm in large-scale assembly-research priorities in measurement assisted assembly. The International Journal of Advanced Manufacturing Technology, 70 (1-4), pp. 621-633.

Maropoulos, P., 2012. Strategic Initiative with Airbus to Accelerate Knowledge Transfer. University of Bath.

Maropoulos, P., Jamshidi, J., Nassehi, A. and Newman, S., 2009. Guest editorial - special issue on digitial enterprise technology. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 223 (5), i.

Maropoulos, P. G., Guo, Y., Jamshidi, J. and Cai, B., 2008. Large volume metrology process models: a framework for integrating measurement with assembly planning. CIRP Annals - Manufacturing Technology, 57 (1), pp. 477-480.

Matthews, J., 2010. Book review: Handbook of Automation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (11), pp. 1157-1158.

Matthews, J., Ding, L., Feldman, J. and Mullineux, G., 2010. The maintenance and handling of constraints in machine design. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 2. New York: ASME, pp. 443-452.

Matthews, J., Ding, L., Singh, B., Mullineux, G. and Medland, A. J., 2008. Modelling to reduce the configuration phase time of machine design. Advanced Materials Research, 44-46, pp. 659-668.

Matthews, J., Hicks, B. J., Mullineux, G., Goodwin, J. and Burke, A., 2011. Modelling the material flow and web tension in the vertical form–fill–seal packaging process. Packaging Technology and Science, 24 (8), pp. 435-450.

Matthews, J., McIntosh, R. and Mullineux, G., 2011. Contrasting opportunities for Mass Customization in food manufacture and food processes. In: Flavio, F. and da Silveira, G., eds. Mass Customization: Engineering and Managing Global Operations. Vol. IV. Springer, pp. 353-374. (Springer Series in Advanced Manufacturing)

Matthews, J., Qiu, X. L. and Ding, L., 2012. Manufacturing feature recognition for mould and die designs: current status and future directions. In: Fournier, M., ed. Perspectives on pattern recognition. Hauppauge NY, USA: Nova Science.

McAlpine, H., Cash, P., Howard, T., Arikoglu, E. S., Loftus, C. and O'Hare, J., 2010. Key themes in design information management. In: 11th International Design Conference, DESIGN 2010. , pp. 1595-1604.

McAlpine, H., Cash, P., Storton, A. and Culley, S., 2011. A Technology Selection Process for the Optimal Capture of Design Information. In: ICoRD '11 International Conference on Research into Design, 2011-01-10 - 2011-01-12, Indian Institute of Science, Bangalore.

McAlpine, H., Hicks, B. and Culley, S., 2009. Comparing the information content of formal and informal design documents: Lessons for more complete design records. In: Proceedings of ICED 09, the 17th International Conference on Engineering Design. , pp. 75-86.

McAlpine, H., Hicks, B. and Culley, S., 2008. Investigating the structure and organisation of engineering logbooks for more effective re-use. In: 10th International Design Conference, Design 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

McAlpine, H., Hicks, B. and Tiryakioglu, C., 2011. The digitial divide: Investigating the personal information management practices of engineers. In: ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. Vol. 6. The Design Society, pp. 31-42.

McAlpine, H., Tiryakioglu, C. and Hicks, B., 2011. The digital divide: Investigating the personal information management practices of engineers. In: International Conference on Engineering Design, ICED11, 2011-08-15 - 2011-08-18, DTU Copenhagen, Copenhagen, Denmark..

McAlpine, H. C., Hicks, B. and Culley, S., 2010. Improving re-use of informal information through the creation of an Engineering Electronic Logbook (EEL): a demonstrator. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 2. New York: American Society of Mechanical Engineers, pp. 843-850.

McIntosh, R., Matthews, J., Mullineux, G. and Medland, A. J., 2010. Late customisation: issues of mass customisation in the food industry. International Journal of Production Research, 48 (6), pp. 1557-1574.

McMahon, C. and Culley, S., 2012. Processing Unstructured Data in Naval Engineering Records. University of Bath.

McMahon, C. and Hicks, B., 2008. Computer support for engineering design tools of today and challenges for tomorrow. In: Proceedings of EDIProD, 2008-01-01, Gdynia, Jurata.

McMahon, C. and Van Leeuwen, J., 2009. Special Issue: Developing and using engineering ontologies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 23 (1), pp. 1-2.

Mcalpine, H., Hicks, B. and Culley, S., 2009. Comparing formal and informal documents: lessons for more complete design records. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Mcalpine, H., Hicks, B. and Culley, S., 2009. The electronic engineers logbook. In: ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2009-08-30 - 2009-09-02, San Diego, CA.

Medland, A. J., Hicks, B. and Gooch, S., 2008. Using constraints in the understanding of the interactions between products and humans. In: Designing Inclusive Futures. London, U. K: Springer, pp. 15-22.

Medland, A. J. and Matthews, J., 2011. The implementation of a direct search approach for the resolution of complex and changing rule-based problems. Engineering with Computers, 27 (2), pp. 105-115.

Medland, A. J., Matthews, J. and Mullineux, G., 2009. A constraint-net approach to the resolution of conflicts in a product with multi-technology requirements. International Journal of Computer Integrated Manufacturing, 22 (3), pp. 199-209.

Medland, A. J., Matthews, J. and Mullineux, G., 2009. The Modelling of the Interaction of the Human Hand with Products. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Menon, C., Brodie, R., Clift, S. E. and Vincent, J. F. V., 2009. Concept design of strain sensors inspired by campaniform sensilla. Acta Astronautica, 64 (2-3), pp. 176-182.

Mileham, A.R., Newnes, L.B. and Hosseini-Nasab, H., 2005. Automatic on-screen cost estimation at the early design stage. In: Next Generation Concurrent Engineering: Smart and Concurrent Integration of Product Data, Services, and Control Strategies, CE 2005. , pp. 587-592.

Mombeshora, I.M. and Dekoninck, E., 2013. Supply chain eco-information sharing in the product development process through computer aided design software. In: Proceedings of the International Conference on Engineering Design, ICED. Vol. 6 DS75-06. , pp. 73-82.

Muelaner, J. E. and Maropoulos, P. G., 2014. Large volume metrology technologies for the light controlled factory. In: The 8th International Conference on Digital Enterprise Technology (DET), 2014, 2014-03-25 - 2014-03-28, Stuttgart.

Muelaner, J. E., Martin, O.C. and Maropoulos, P.G., 2013. Achieving low cost and high quality aero structure assembly through integrated digital metrology systems. Procedia CIRP, 7, pp. 688-693.

Muelaner, J. E., Cai, B. and Maropoulos, P. G., 2009. Large volume metrology instrument selection and measurability analysis. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Vol. 66. Springer-Verlag, pp. 1027-1041. (Advances in Intelligent and Soft Computing)

Muelaner, J. E. and Maropoulos, P., 2008. Large Scale Metrology In Aerospace Assembly. In: 5th International Conference on Digital Enterprise Technology, 2008-10-22 - 2008-10-24, Nantes.

Muelaner, J. E., Wang, Z., Jamshidi, J., Maropoulos, P., Mileham, A. R., Hughes, E. B. and Forbes, A. B., 2008. iGPS - An Initial Assessment Of Technical And Deployment Capability. In: 3rd International Conference on Manufacturing Engineering, 2008-10-01 - 2008-10-03, Kallithea of Chalkidiki.

Muelaner, J. E., Wang, Z., Jamshidi, J., Maropoulos, P. G., Mileham, A. R., Hughes, E. B. and Forbes, A. B., 2009. Study of the uncertainty of angle measurement for a rotary-laser automatic theodolite (R-LAT). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (3), pp. 217-229.

Muelaner, J. E., Wang, Z., Martin, O., Jamshidi, J. and Maropoulos, P. G., 2009. Verification of the indoor GPS system by comparison with points calibrated using a network of laser tracker measurements. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Vol. 66. Springer-Verlag, pp. 607-619. (Advances in Intelligent and Soft Computing)

Muelaner, J. E., Cai, B. and Maropoulos, P. G., 2010. Large volume metrology instrument selection and measurability analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (6), pp. 853-868.

Muelaner, J. E., Wang, Z., Martin, O., Jamshidi, J. and Maropoulos, P. G., 2010. Estimation of uncertainty in three-dimensional coordinate measurement by comparison with calibrated points. Measurement Science & Technology, 21 (2), 025106.

Mullineux, G. and Hicks, B. J., 2013. Surface modelling and characterization of forming shoulders. In: 14th IMA Conference on Mathematics of Surfaces, 2013-09-11 - 2013-09-13, Birmingham.

Mullineux, G. and Simmons, M. J. H., 2008. Influence of rheological model on the processing of yoghurt. Journal of Food Engineering, 84, pp. 250-257.

Mullineux, G., 2011. Atlas of spherical four-bar mechanisms. Mechanism and Machine Theory, 46 (11), pp. 1811-1823.

Mullineux, G., 2008. Non-linear least squares fitting of coefficients in the Herschel-Bulkley model. Applied Mathematical Modelling, 32 (12), pp. 2538-2551.

Mullineux, G., 2009. On the Torque Characteristic of a Crash-Lock Carton Base. Journal of Mechanical Design, 131 (8), 084502.

Mullineux, G., Feldman, J. and Matthews, J., 2010. Using constraints at the conceptual stage of the design of carton erection. Mechanism and Machine Theory, 45 (12), pp. 1897-1908.

Mullineux, G. and Hicks, B. J., 2012. A simplified tool to support design, sales, and customer interaction for complex forming shoulder design. In: Horváth, I., Rusák, Z., Albers, A. and Behrendt, M., eds. Tools and Methods of Competitive Engineering - TMCE 2012. Delft: Delft University of Technology, pp. 963-972.

Mullineux, G., Hicks, B. J. and Berry, C., 2012. Numerical optimization approach to modelling delamination and buckling of geometrically constrained structures. Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences, 370 (1965), pp. 1925-1941.

Mullineux, G. and Hillis, A., 2012. Cost reduction and product innovation for bulk handling machines. University of Bath.

Mullineux, G. and Matthews, J., 2010. Constraint-based simulation of carton folding operations. Computer-Aided Design, 42 (3), pp. 257-265.

Mullineux, G., Matthews, J. and Medland, A. J., 2010. Constraint-based design support for the improved erection of packaging. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 2. New York: ASME, pp. 103-111.

Mullineux, G., Medland, A. J. and Matthews, J., 2009. Reconfiguring mechanisms using constraints. In: ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2009), 2009-06-22 - 2009-06-24, London United Kingdom.

Mullineux, G., Medland, T. and Matthews, J., 2009. Design for reconfigurablility: Achieving flexibility in "light" machines. In: Proceedings of ICED 09, the 17th International Conference on Engineering Design. , pp. 149-160.

Munoz-Escalona, P., Shokrani Chaharsooghi, A., Dhokia, V., Imani Asrai, R. and Newman, S. T., 2013. A Surface Roughness and Power Consumption Analysis When Slot Milling Austenitic Stainless Steel in a Dry Cutting Environment.

N

Nassehi, A., Newman, S. T., Xu, X. W. and Rosso, R. S. U., 2008. Toward interoperable CNC manufacturing. International Journal of Computer Integrated Manufacturing, 21 (2), pp. 222-230.

Neale, G., Medland, A. J. and Mullineux, G., 2008. Improving the design of an over-wrapper using constraint modelling. In: TMCE 2008 7th international symposium on Tools and Methods for Competitive Engineering, 2008-04-21 - 2008-04-25, Izmir.

Neale, G., Mullineux, G., Matthews, J. and Medland, T., 2009. Case study: constraint-based improvement of an over-wrapping machine. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (2), pp. 207-216.

Newman, S., 2012. Cryogenic Machining for Shoe Soles and Insoles. University of Bath.

Newman, S. and Nassehi, A., 2009. Machine tool capability profile for intelligent process planning. CIRP Annals - Manufacturing Technology, 58 (1), pp. 421-424.

Newman, S., Nassehi, A., Xu, X. W., Rosso Jr, R. S. U., Wang, L., Yusof, Y., Ali, L., Liu, R., Zheng, L. Y., Kumar, S., Vichare, P. and Dhokia, V., 2008. Strategic advantages of interoperability for global manufacturing using CNC technology. Robotics and Computer-Integrated Manufacturing, 24 (6), pp. 699-708.

Newnes, L. B., 2012. Balancing function and cost of orthopaedic implants : KTA007.

Newnes, L., Mileham, A., Cheung, W., Lanham, J. D., Saravi, M. E. and Bradbery, R. W., 2008. Predicting the whole-life cost of a product at the conceptual design stage. Journal of Engineering Design, 19 (2), pp. 99-112.

O

O'Hare, J. and Dekoninck, E., 2008. Eco-innovation tools to promote creativity in the design of environmentally sustainable products. In: CRECOS Creative and Complex Design Symposium, 2008-09-11 - 2008-09-12, Helsinki University of Technology.

O'Hare, J., Dekoninck, E., McMahon, C. and Turnbull, A., 2010. Adapting innovation tools to the eco-innovation requirements of industry: case study results. International Journal of Design Engineering, 3 (2), pp. 192-194.

O'Hare, J., Dekoninck, E., Turnbull, A. and McMahon, C., 2009. Adapting eco-innovation tools to the needs of the company: a case study. In: 17th International Conference on Engineering Design, ICED'09, 2009-04-24 - 2009-04-27, Stanford, California.

O'Hare, J., Hansen, P., Turner, N. and Dekoninck, E., 2008. Innovation Hubs: why do these Innovation superstars often die young? In: 9th International Design Conference, DESIGN 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

Owen, G. W., Matthews, J., McIntosh, R. I. and Culley, S. J., 2011. Design for Changeover (DFC): enabling flexible and highly responsive manufacturing. In: Fogliatto, F. and da Silveira, G., eds. Mass Customization –Engineering and Managing Global Operations. Vol. III. Springer, pp. 247-273. (Springer Series in Advanced Manufacturing)

P

Park, A., Matthews, J. and Mullineux, G., 2010. Investigation of an approach for in-line testing of food packs. In: Horvath, I., Mandorli, F. and Rusak, Z., eds. Tools and Methods of Competitive Engineering. Vol. 2. Delft: Delft University of Technology, pp. 727-736.

Patel, M., Ball, A. and Ding, L., 2008. Curation and Preservation of CAD Engineering Models in Product Lifecycle Management. In: Conference on Virtual Systems and MultiMedia Dedicated to Digital Heritage (VSMM’08), 2008-10-20 - 2008-10-26, Limassol.

Patel, M., Ball, A. and Ding, L., 2008. Strategies for the Curation of CAD Engineering Models. In: 4th International Digital Curation Conference “Radical Sharing: Transforming Science?”, 2008-12-01 - 2008-12-03, Edinburgh, Scotland.

Patel, M., Ball, A. and Ding, L., 2009. Strategies for the curation of CAD engineering models. International Journal of Digital Curation, 4 (1), pp. 84-97.

Peggs, G. N., Maropoulos, P. G., Hughes, E. B., Forbes, A. B., Robson, S., Ziebart, M. and Muralikrishnan, B., 2009. Recent developments in large-scale dimensional metrology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 ((B6)), pp. 571-595.

Percival, A., Dekoninck, E. A., Miles, A. W. and Holsgrove, T. P., 2007. Improved Mattress. A47C27-WO2007128967, 15 November 2007.

R

Ranscombe, C.H., Mullineux, G. and Hicks, B.J., 2012. Evaluating similarity and exploring branding in vehicle styling using fourier decomposition. In: Marjanovic, D., Storga, M., Pavkovic, N. and Bojcetic, N., eds. Design 2012: Proceedings of the 12th International Design Conference, May 21-24, 2012, Dubrovnik - Croatia. Glasgow: The Design Society, pp. 1377-1385.

Ranscombe, C., Hicks, B., Mullineux, G. and Singh, B., 2011. Characterizing and evaluating aesthetic features in vehicle design. In: International Conference on Research into Design (ICoRD '11), 2011-01-10 - 2011-01-12, Bangalore.

Ranscombe, C., Hicks, B., Mullineux, G. and Singh, B., 2010. Vehicle design and brand perception: an investigation into visually decomposing product forms. In: International Conference on Design and Semantics of Form and Movement 2010 (DeSForM), 2010-11-03 - 2010-11-05, Lucerne.

Ranscombe, C., Hicks, B., Mullineux, G. and Singh, B., 2011. Visually decomposing vehicle images: Exploring the influence of different aesthetic features on consumer perception of brand. Design Studies, 33 (4), pp. 319-341.

Ranscombe, C., Hicks, B. J. and Mullineux, G., 2012. A method for exploring similarities and visual references to brand in the appearance of mature mass-market products. Design Studies, 33 (5), pp. 496-520.

Rayner, R., Sahinkaya, M. N. and Hicks, B., 2009. Combining Inverse Dynamics with Traditional Mechanism Synthesis to Improve the Performance of High Speed Machinery. In: Proceedings of the ASME Dynamic Systems and Control Conference 2008. ASME, pp. 393-400.

Rojo, F. J. and Vincent, J. F. V., 2008. Fracture properties of potato crisps. International Journal of Food Science and Technology, 43 (4), pp. 752-760.

Rojo, F. J. and Vincent, J. F. V., 2009. Objective and subjective measurement of the crispness of crisps from four potato varieties. Engineering Failure Analysis, 16 (8), pp. 2698-2704.

Ross-Pinnock, D. and Maropoulos, P. G., 2014. Temperature measurement technologies for the enhancement of product and equipment integrity in the light controlled factory. In: 8th International Conference on Digital Enterprise Technology (DET), 2014, 2014-03-25 - 2014-03-28, Stuttgart.

S

Safaieh, M., Nassehi, A. and Newman, S. T., 2013. Adapting STEP-NC programs for interoperability between different CNC Technologies. In: 37th International MATADOR 2012 Conference, 2012-07-25 - 2012-07-27, Manchester.

Sahinkaya, M. N., Abulrub, A. H., Keogh, P. and Burrows, C., 2009. A multi-objective adaptive controller for magnetic bearing systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 6. New York: ASME, pp. 1063-1071.

Sahoo, A. K., Tiwari, M. K. and Mileham, A. R., 2008. Six Sigma based approach to optimize radial forging operation variables. Journal of Materials Processing Technology, 202 (1-3), pp. 125-136.

Salehi-Douzloo, V. and McMahon, C., 2011. Development and application of an integrated approach for parametric associative CAD design in an industrial context. Computer-Aided Design and Applications, 8 (2), pp. 225-236.

Salehi-Douzloo, V. and McMahon, C., 2009. Methodological integration of parametric associative CAD systems in Product Lifecycle Management (PLM) enviroment. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 2. New York: ASME, pp. 505-514.

Salehi-Douzloo, V. and McMahon, C. A., 2009. Development of a Generic Integrated Approach for Parametric Associative CAD Systems. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Saravi, M., Newnes, L. B. and Mileham, T., 2013. Optimising performance and cost at the early design stages. International Journal of Engineering and Technology Innovation, 3 (3), pp. 214-228.

Saravi, M., Newnes, L., Mileham, A. and Goh, Y.-M., 2008. Estimating Cost at the Conceptual Design Stage to Optimize Design in terms of Performance and Cost. In: Proceedings of the 15th ISPE Int Conf on Concurrent Engineering (CE2008), 2008-08-18 - 2008-08-22, Queens Belfast.

Saravi, M., Newnes, L. B., Mileham, A. R., Goh, Y. M. and Morton, K., 2013. Using Taguchi method to optimise performance and product cost at the conceptual stage of design. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (9), pp. 1360-1372.

Saunders, P., Cai, B., Orchard, N. and Maropoulos, P., 2013. Towards a definition of PLM-integrated dimensional measurement. Procedia CIRP, 7, pp. 670-675.

Sells, E., Smith, Z., Bailard, S., Bowyer, A. and Olliver, V., 2009. RepRap: The Replicating Rapid Prototyper - maximizing customizability by breeding the means of production. In: Piller, F. T. and Tseng, M. M., eds. Handbook of Research in Mass Customization and Personalization. Vol. 1. World Scientific, pp. 568-580.

Settanni, E., Newnes, L. B., Thenent, N. E., Parry, G. and Goh, Y. M., 2014. A through-life costing methodology for use in product-service-systems. International Journal of Production Economics, 153, pp. 161-177.

Shokrani, A., Dhokia, V., Munoz-Escalona, P. and Newman, S., 2013. Forthcoming. State-of-the-art cryogenic machining and processing. International Journal of Computer Integrated Manufacturing

Shokrani, A., Dhokia, V. and Newman, S., 2012. Study of the effects of cryogenic machining on the machinability of Ti-6Al-4V titanium alloy. In: Proceedings of the 12th International Conference of the European Society for Precision Engineering & Nanotechnology. Vol. 2. Bedford: Euspen, pp. 27-31.

Shokrani, A., Dhokia, V., Newman, S. and Imani Asrai, R., 2012. An initial study of the effect of using liquid nitrogen coolant on the surface roughness of inconel 718 nickel-based alloy in CNC milling. Procedia CIRP, 3 (1), pp. 121-125.

Shokrani Chaharsooghi, A., Dhokia, V. and Newman, S., 2012. Evaluation of Cryogenic CNC Milling of Ti-6Al-4V Titanium Alloy. In: 22nd International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2012), 2012-06-10 - 2012-06-13, Helsinki.

Shokrani Chaharsooghi, A., Dhokia, V. and Newman, S., 2012. Investigation of computer integrated inspection techniques in CNC manufacturing systems. In: International Conference Management of Technology – Step to Sustainable Production (MOTSP 2012), 2012-06-14 - 2012-06-16, Zadar.

Simpson, L. and Mullineux, G., 2009. Exponentials and motions in geometric algebra. In: Skala, V. and Hildenbrand, D., eds. GraVisMa 2009: Workshop Proceedings. Plzen, CZ: Vaclav Skala/ University of West Bohemia, pp. 9-16.

Singh, B., Hicks, B. J., Medland, A. J., Mullineux, G. and Molenbroek, J. F. M., 2010. A constraint based human model for simulating and predicting postures. In: Horvath, I., Mandorli, F. and Rusak, Z., eds. Tools and Methods of Competitive Engineering. Vol. 1. Delft: Delft University of Technology, pp. 221-229.

Singh, B., Hicks, B. J., Medland, A. J., Mullineux, G. and Molenbroek, J. F. M., 2013. Human movement using a constraint-based software environment : gaining understanding during initial design phases. International Journal of Computer Aided Engineering and Technology, 5 (2-3), pp. 118-138.

Singh, B., Matthews, J., Mullineux, G. and Medland, A. J., 2008. Design catalogues for mechanism selection. In: 10th International Design Conference, Design 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

Singh, B., Matthews, J., Mullineux, G. and Medland, A. J., 2008. Investigating the effects of machine parameters on the carton erection process of a high speed packaging machine. In: 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE), 2008-04-21 - 2008-04-25, Izmir.

Singh, B., Matthews, J., Mullineux, G. and Medland, A. J., 2008. Machine configuration analysis using multi-instance modelling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (9), pp. 1161-1170.

Singh, B., Matthews, J., Mullineux, G. and Medland, A. J., 2009. Product development in manufacturing SMES: Current state, challenges and relevant supportive techniques. In: International Conference on Engineering Design (ICED'09), 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Snider, C., Culley, S. and Dekoninck, E., 2013. Analysing creative behaviour in the later stage design process. Design Studies, 34 (5), pp. 543-574.

Snider, C., Culley, S. and Dekoninck, E., 2013. Determining relative quality for the study of creative design output. In: ICoRD'13 International Conference on Research into Design, 2013-01-07 - 2013-01-09, Chennai.

Snider, C., Dekoninck, E. A. and Culley, S. J., 2013. Forthcoming. The appearance of creative behaviour in later stage design processes. International Journal of Design Creativity and Innovation

Snider, C., Dekoninck, E. and Culley, S., 2012. Improving confidence in smaller data sets through methodology: The development of a coding scheme. In: 12th International Design Conference, DESIGN 2012, 2012-05-21 - 2012-05-24, Dubrovnik.

Snider, C., Dekoninck, E., Yue, H. and Howard, T., 2011. Analysing the use of four creativity tools in a constrained design situation. In: International Conference on Engineering Design, ICED11, 2011-08-15 - 2011-08-18, DTU Copenhagen, Copenhagen, Denmark..

Snider, C. M., Dekoninck, E. and Culley, S., 2011. Studying the appearance and effect of creativity within the the latter stages of the product development process. In: DESIRE'11: Creativity and Innovation in Design, 2011-10-18 - 2011-10-21, Eindhoven.

Song, Y.-Z., Bowen, C. R., Kim, A. H., Nassehi, A., Padget, J. and Gathercole, N., 2014. Virtual visual sensors and their application in structural health monitoring. Structural Health Monitoring - An International Journal, 13 (3), pp. 251-264.

Song, Y.-Z., Bowen, C. R., Kim, H. A., Nassehi, A., Padget, J., Gathercole, N. and Dent, A., 2014. Non-invasive damage detection in beams using marker extraction and wavelets. Mechanical Systems and Signal Processing, 49 (1-2), pp. 13-23.

Storga, M., Darlington, M., Culley, S. and Majanovic, D., 2009. Toward a process and method for tracing the development of information objects used in engineering design. In: Proceedings of the 17th International Conference on Engineering Design (ICED'09). Vol. 8. DS 58-8 ed. The Design Society, pp. 19-30.

T

Tang, L. C. M., Zhao, Y., Austin, S., Darlington, M. and Culley, S., 2010. Codification vs Personalisation: a study of the information evaluation practice between aerospace and construction industries. International Journal of Information Management, 30 (4), pp. 315-325.

Thenent, N., E., Settanni, E. and Newnes, L. B., 2012. Know what you need to know: The role of technological knowledge in product service systems. In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, 2012-07-02 - 2012-07-04, Nantes.

Torlind, P., Blanco, E., Jung, M., Hicks, B. and Mcalpine, H., 2009. Lessons learnt and future challenges for design observation. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

V

Vahid, E. and McMahon, C., 2009. Action Research into the use of parametric associative CAD systems in an industrial context. In: International Conference on Engineering Design, ICED'09, 2009-08-24 - 2009-08-27, Stanford University, Stanford, CA.

Vianello, G., Xie, Y., Kristensen, S. A. and Culley, S. J., 2010. Handling of in-service support: Comparison of two case studies from complex industries. In: 11th International Design Conference, DESIGN 2010. , pp. 1209-1218.

Vichare, P., Nassehi, A., Kumar, S. and Newman, S. T., 2009. A unified manufacturing resource model for representing CNC machining systems. Robotics and Computer-Integrated Manufacturing, 25 (6), pp. 999-1007.

Vichare, P., Nassehi, A., Kumar, S. and Newman, S., 2008. A Unified Manufacturing Resource Model for Representation of CNC Machining Systems. In: 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2008-06-30 - 2008-07-02, Skövde.

Vichare, P., Nassehi, A. and Newman, S., 2009. A unified manufacturing resource model for representation of computerized numerically controlled machine tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (5), pp. 463-483.

Vichare, P., Nassehi, A. and Newman, S., 2008. Representing fixture information within a unified manufacturing resource model. In: International Conference On Advances in Mechanical Engineering (ICAME-2008), 2008-12-15 - 2008-12-17, Surat.

Vichare, P., Nassehi, A. and Newman, S. T., 2009. A Novel Information Modelling Approach for Representing Parallel Kinematic Machine Tools. In: 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2009), 2009-06-03 - 2009-06-05, Moscow, Russia.

Vincent, J. F. V., 2008. Biomimetic materials. Journal of Materials Research, 23 (12), pp. 3140-3147.

W

Wang, Q., Manickam, H., Mileham, A. and Owen, G., 2008. An investigation of a semi-automated automotive engine assembly line incorporating walking workers. In: 2nd CIRP Conference on Assembly Technologies and Systems, 2008-09-21 - 2008-09-23, Toronto.

Wang, Q., Lassalle, S., Mileham, A. R. and Owen, G. W., 2009. Analysis of a linear walking worker line using a combination of computer simulation and mathematical modeling approaches. Journal of Manufacturing Systems, 28 (2-3), pp. 64-70.

Wang, Z., Forbes, A. and Maropoulos, P. G., 2014. Laser tracker position optimization. In: The 8th International Conference on Digital Enterprise (DET), 2014, 2014-03-25 - 2014-03-28, Stuttgart.

Wang, Z., Forbes, A. and Maropoulos, P. G., 2014. Laser tracker position optimization. In: 29th Coordinate Metrology Systems Conference, 2013, 2013-07-23 - 2013-07-25, San Diego.

Wang, Z. and Maropolous, P. G., 2013. Real-time error compensation of a three-axis machine tool using a laser tracker. The International Journal of Advanced Manufacturing Technology, 69 (1-4), pp. 919-933.

Wang, Z., Maropoulos, P., Jamshidi, J., Owen, G. and Mileham, A., 2008. Experimental Deployment of the Indoor GPS Large Volume Metrology System in a Large Scale Production Facility. In: 3rd International Conference on Manufacturing Engineering, 2008-10-01 - 2008-10-03, Kallithea of Chalkidiki.

Wang, Z., Maropoulos, P., Mastrogiacomo, L. and Franceschini, F., 2009. Experimental testing of the dynamic tracking performance of iGPS and laser tracker. In: Laser Metrology and Machine Performance IX. Bedford, UK: Euspen, pp. 305-316.

Wasiak, J., Hicks, B., Dong, A. and Newnes, L., 2009. Engineering work and email: An analysis of the information content of email in a major systems engineering project. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. Vol. 8. New York: ASME, pp. 915-925.

Wasiak, J., Hicks, B., Newnes, L. and Dong, A., 2008. Characterising the Information Content of an Email Corpus from a Software Design Project. In: 5th CIRP International Conference on Digital Enterprise Technology (DET 2008), 2008-10-22 - 2008-10-24, Nantes.

Wasiak, J., Hicks, B., Newnes, L. and Dong, A., 2008. Characterising the Information Content of an Email Corpus from a Software Design Project. In: KIM Conference 2008, 2008-04-02 - 2008-04-03, Reading.

Wasiak, J., Hicks, B., Newnes, L., Loftus, C., Dong, A. and Burrow, L., 2011. Managing by E-Mail: What E-mail Can Do for Engineering Project Management. IEEE Transactions on Engineering Management, 58 (3), pp. 445-456.

Wasiak, J., Newnes, L., Mileham, T., Hicks, B. and Outram, G., 2008. Guiding team selection and the use of the Belbin approach. In: 10th International Design Conference, Design 2008, 2008-05-19 - 2008-05-22, Dubrovnik.

Whittaker, C., Borrion, A., Newnes, L. B. and McManus, M. C., 2014. Forthcoming. The renewable energy directive and cereal residues. Applied Energy, 122, pp. 207-215.

Wild, P., McMahon, C. A. and Culley, S. J., 2008. Introduction to special issue on empirical approaches in design information and knowledge. Journal of Design Research, 6, p. 289.

Wild, P. J., Giess, M. and McMahon, C. A., 2009. Describing engineering documents with faceted approaches: Observations and reflections. Journal of Documentation, 65 (3), pp. 420-445.

Wild, P. J., McMahon, C., Darlington, M. J., Liu, S. and Culley, S., 2010. A diary study of information needs and document usage in the engineering domain. Design Studies, 31 (1), pp. 46-73.

Y

Yu, S., Benzeval, I., Bowyer, A. and Hubble, J., 2009. Preparation of pore-filled responsive membranes using dextran precipitation. Journal of Membrane Science, 339 (1-2), pp. 138-142.

Yusof, Y., Newman, S., Nassehi, A. and Case, K., 2009. Interoperable CNC system for turning operations. Proceedings of World Academy of Science, Engineering and Technology, 34, pp. 941-947.

Z

Zhang, M. X., Lobato, H., Jamshidi, J. and Maropoulos, P. G., 2009. A Study on CMM task-specific measurement using simulation software. In: The 7th International Conference on Manufacturing Research (ICMR09), 2009-09-08 - 2009-09-10, University of Warwick.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2008. Temperature responsive pore-filled membranes based on a BSA/poly(N-isopropylacrylamide) hydrogel. Advances in Polymer Technology, 27 (1), pp. 27-34.

Zhang, X., Liu, R., Nassehi, A. and Newman, S., 2009. A STEP-NC Process Planning System for CNC Turning Operations. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2009-07-06 - 2009-07-08, Teeside.

Zhang, X., Maropoulos, P. G., Jamshidi, J. and Orchard, N., 2011. Economical analysis for investment on measuring systems. In: 7th International Conference on Digital Enterprise Technology, 2011-09-28 - 2011-09-30, Athens.

Zhang, X., Nassehi, A. and Newman, S. T., 2013. Forthcoming. Feature recognition from CNC part programs for milling operations. The International Journal of Advanced Manufacturing Technology

Zhang, X., Nassehi, A., Safaieh, M. and Newman, S. T., 2013. Process comprehension for shopfloor manufacturing knowledge reuse. International Journal of Production Research, n/a, n/a.

Zhao, Y., Darlington, M., Austin, S. A. and Culley, S., 2008. Information Evaluation: Empirical Investigations In Engineering Organizations. In: KIM Project Conference 2008, 2008-04-03 - 2008-04-04, University of Reading, Reading, UK..

Zhao, Y. Y., Tang, L. C. M., Darlington, M. J., Austin, S. A. and Culley, S. J., 2008. Information Evaluation Empirical Investigations in Engineering Organizations. In: Remenyi, D., ed. Proceedings of the 2nd European Conference on Information Management and Evaluation. Academic Conferences, pp. 443-450.

Zhao, Y. Y., Tang, L. C. M., Darlington, M., Austin, S. A. and Culley, S., 2008. High value information in engineering organisations. International Journal of Information Management, 28 (4), pp. 246-258.

Zheng, L. Y., Dong, H. F., Vichare, P., Nassehi, A. and Newman, S., 2008. Systematic modeling and reusing of process knowledge for rapid process configuration. Robotics and Computer-Integrated Manufacturing, 24 (6), p. 763.

Zheng, L. Y., McMahon, C. A., Li, L., Ding, L. and Jamshidi, J., 2008. Key characteristics management in product lifecycle management: a survey of methodologies and practices. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (8), pp. 989-1008.

Zheng, L., Zhu, X., Liu, R., Wang, Y. and Maropoulos, P. G., 2013. A novel algorithm of posture best fit based on key characteristics for large components assembly. Procedia CIRP, 10, pp. 162-168.

Zhu, Z., Dhokia, V. and Newman, S.T., 2013. The development of a novel process planning algorithm for an unconstrained hybrid manufacturing process. Journal of Manufacturing Processes, 15 (4), pp. 404-413.

Zhu, Z., Dhokia, V.G., Nassehi, A. and Newman, S.T., 2013. Forthcoming. A review of hybrid manufacturing processes - state of the art and future perspectives. International Journal of Computer Integrated Manufacturing

This list was generated on Thu Jul 24 12:17:26 2014 IST.