Research

Items from Research Centres & Institutes > BRE Centre in Innovative Construction Materials

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level: 310.

Walker, P., Ghavami, K., Paine, K., Heath, A., Lawrence, M. and Fodde, E., eds., 2009. 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, Conference proceedings. Bath: University of Bath.

Orr, J., Evernden, M., Darby, A. and Ibell, T., eds., 2012. Proceedings of the Second International Conference on Flexible Formwork. Bath: University of Bath.

Abora, K., Paine, K., Quillin, K. and Dunster, A., 2012. Properties and performance of alkali activated fly ash and hydrated lime concrete. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11, Dundee.

Abora, K., Quillin, K., Paine, K. A. and Dunster, A. M., 2009. Effect of mix design on consistence and setting time of alkali activated concrete. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Abson, N. I., Allen, G., Ball, R. J. and El-Turki, A., 2009. Linseed fibre lime composites, effect of fibre pre-treatment. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Abu Saleh, M., Paine, K. and Walker, P., 2012. High volume slag cement and unwashed crushed rock fine limestone aggregates to produce low carbon concrete for the Arabian Peninsula. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11, Dundee.

Ahmad, Z., Ansell, M. P., Smedley, D. and Tahir, P. M., 2012. Creep behavior of epoxy-based adhesive reinforced with nanoparticles for bonded-in timber connection. Journal of Materials in Civil Engineering, 24 (7), pp. 825-831.

Alam, P., Ansell, M. P. and Smedley, D., 2013. Adhesively bonded plate and rod reinforcements for timber flexural beams. International Wood Products Journal, 4 (1), pp. 52-61.

Alam, P., Ansell, M. and Smedley, D., 2012. Effects of reinforcement geometry on strength and stiffness in adhesively bonded steel-timber flexural beams. Intelligent Buildings International, 2 (3), pp. 231-244.

Amirjamshidi, G., Fodde, E., D'Ayala, D. and Mokhtari, E., 2012. The role of intangible assets in the conservation of Bam and its cultural landscape as a World Heritage site. In: 5th International Conference on Sustainable Tourism, ST 2012;A. Coruna;, 2012-06-12 - 2012-06-14, A Coruna.

Amirjamshidi, G., Fodde, E., Forsyth, M., Heath, A. and Mokhtari, E., 2012. Towards a methodology for the study of holistic approaches for the conservation of earthen architecture in seismic areas. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07, Weimar.

Ansell, M.P., 2014. Natural fibre composites in a marine environment. In: Natural Fibre Composites. Woodhead Publishing Ltd., pp. 365-374.

Ansell, M.P., Muhammad Roseley, A. S. and Smedley, D., 2010. Stability of room temperature cure epoxy adhesives for timber structures under creep loading in tension and shear. In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Vol. 4. Engineered Wood Products Association, pp. 2900-2906.

Ansell, M. P., 2013. Multi-functional nano-materials for timber in construction. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 248-256.

Ansell, M. P., 2011. Wood-a 45th anniversary review of JMS papers. Part 1: The wood cell wall and mechanical properties. Journal of Materials Science, 46 (23), pp. 7357-7368.

Ansell, M. P., 2012. Wood: A 45th anniversary review of JMS papers Part 2. Wood modification, fire resistance, carbonization, wood-cement and wood-polymer composites. Journal of Materials Science, 47 (2), pp. 583-598.

Archila Santos, H. F., Ansell, M. P. and Walker, P., 2014. Elastic properties of thermo-hydro-mechanically modified bamboo (Guadua angustifolia Kunth) measured in tension. In: Key Engineering Materials. Vol. 600. , pp. 111-120.

Aziz, S.H. and Ansell, M.P., 2004. Optimising the properties of green composites. In: Green Composites. Woodhead Publishing Ltd., pp. 154-180.

Ball, R. J. and Allen, G. C., 2013. Hydraulic lime mortars: A study of mechanical properties. In: Barnett, S., ed. 33rd Cement & Concrete Science Conference. Portsmouth: University of Portsmouth.

Ball, R., Pesce, G. and Bowen, C., 2012. Characterisation of lime/metakaolin paste using impedance spectroscopy. Key Engineering Materials, 517, pp. 487-494.

Ball, R. J., El-Turki, A. and Allen, G., 2009. Influence of carbonation on the load dependent deformation of hydraulic lime mortars. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Barclay, M., Holcroft, N. and Shea, A., 2014. Methods to determine whole building hygrothermal performance of Hemp-lime buildings. Building and Environment

Bawcombe, J., Harris, R., Walker, P. and Ansell, M., 2010. A multidisciplinary study assessing the properties of Douglas-fir grown in the South West region of the United Kingdom. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24, Riva del Garda.

Bernal, S., Ball, R., Hussein, O., Heath, A. and Provis, J., 2014. Paper sludge ash as a precursor for production of alkali-activated materials. In: Proceeding of the Second International Conference on Advances in Chemically-Activated Materials (CAM’2014). Changsha, China: .

Bevan, R., Woolley, T., Pritchett, I., Carpenter, R., Walker, P. and Duckett, M., 2008. Hemp Lime Construction: a guide to building with hemp lime composites. London: BRE Press.

Brandon, D., Ansell, M. P., Harris, R., Walker, P. and Bregulla, J., 2014. Modelling of non-metallic timber connections at elevated temperatures. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 231-241. (RILEM Bookseries; 9)

Brandon, D., Thomson, A., Ansell, M. P., Bregulla, J., Harris, R. and Walker, P. J., 2014. Stiffness modelling of non-metallic timber connections with pultruded dowels. In: InCIEC 2013 International Civil and Infrastructure Engineering Conference, 2013-09-22 - 2014-01-24, Kuching, Sarawak.

Brennan, J., Pedreschi, R., Walker, P. and Ansell, M., 2013. The potential of advanced textiles for fabric formwork. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 229-237.

Browning, G. G., Darby, A. P. and Walker, I., 2008. Human Perception of Vibrations due to Synchronised Crowd Loading. In: EURODYN 2008 - 7th European Conference on Structural Dynamics, 2008-07-07 - 2008-07-09, Southampton.

Chang, W. and Nearchou, N., 2013. Investigation of the potential of hot-pressed wood in all-timber connections. In: Schober, K.-U., ed. Innovative timber composites – improving wood with other materials. , pp. 21-25.

Chang, W. S., Thomson, A., Walker, P. and Harris, R., 2009. Optimization of the all-wood pegged beam-to-beam timber connections. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Chang, W.-S., Murakami, S., Komatsu, K., Araki, Y., Shrestha, K., Omori, T. and Kainuma, R., 2013. Technical note: Potential to use shape memory alloy in timber dowel-type connections. Wood and Fiber Science, 45 (3), pp. 330-334.

Chang, W. S., 2009. Reinforcement of traditional timber shear walls. In: 1st International Symposium of Indonesian Wood Research Society., 2009-01-01, Bogor.

Chang, W. S., Hsu, M. F. and Lo, M., 2008. Full-scale experiment on traditional timber frames of Taiwan. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05, Miyazaki.

Chang, W.-S., Hsu, M.-F. and Komatsu, K., 2011. A new proposal to reinforce planked timber shear walls. Journal of Wood Science, 57 (6), pp. 493-500.

Chang, W.-S., Thomson, A., Harris, R., Walker, P. and Shanks, J., 2011. Development of all-wood connections with plywood flitch plate and oak pegs. Advances in Structural Engineering, 14 (2), pp. 123-132.

Chang, W.-S., Wakita, T., Kitamori, A., Komatsu, K., Kataoka, Y. and Hsu, M.-F., 2012. Dynamic Properties of a Traditional Complex Bracket Sets in an Oriental Temple. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 5. , pp. 460-463.

Chapman, J., Reynolds, T. and Harris, R., 2012. A 30 level cross laminated timber building system and analysis of the eurocode dynamic wind loads. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19, Auckland.

Cheah, J. S. J., Walker, P., Heath, A. and Morgan, T. K. K. B., 2012. Evaluating shear test methods for stabilised rammed earth. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (6), pp. 325-334.

Ciancio, D., Jacquin, P. and Walker, P., 2013. Advances on the assessment of soil suitability for rammed earth. Construction and Building Materials,, 42, pp. 40-47.

Collery, D., Bjerregaard, M. and Paine, K., 2012. The quality of collapse debris and possible reuse of this material to rebuild Port au Prince Haiti. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11, Dundee.

Collery, D. J., McKenna, P., Dunne, D. and Paine, K. A., 2014. Strength and deformation characteristics of concrete containing recycled aggregate fines. In: Civil Engineering Research in Ireland (CERI 2014) conference, 2014-08-28 - 2014-08-29, Belfast.

Coonan, R., Darby, A. and Ibell, T., 2009. Effectively confined area for FRP-confined RC columns under eccentric loading. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03, Edinburgh, Scotland.

D'Ayala, D. F. and Tsai, P. H., 2008. Seismic Vulnerability of Dieh-Dou Timber structures in Taiwan. Engineering Structures, 30 (8), pp. 2101-2113.

Darby, A. P., Denton, S. R. and Ibell, T. J., 2009. Influence of changes in cross section on the effectiveness of externally bonded FRP strengthening. Journal of Composites for Construction, 13 (3), pp. 208-216.

Darby, A., Clarke, J., Shave, J. D. and Ibell, T., 2012. Design guidance for strengthening concrete structures using fibre composite materials : report of a Concrete Society Working Party. 3rd ed. Other. Camberley: The Concrete Society. (Technical Report; 55)

Darby, A., Coonan, R., Ibell, T. and Evernden, M., 2011. FRP confined square and rectangular columns under concentric and eccentric loading. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 264-276.

Darby, A., Ibell, T. and Evernden, M., 2010. Innovative use and characterization of polymers for timber-related construction. Materials, 3 (2), pp. 1104-1124.

Darby, A., Paine, K. and Ibell, T., 2009. Concrete research within the BRE Centre for Innovative Construction Materials. Concrete, 43 (3), pp. 35-37.

Dawson, A.R., Dehdezi, P.K., Hall, M.R., Wang, J. and Isola, R., 2012. Enhancing thermal properties of asphalt materials for heat storage and transfer applications. Road Materials and Pavement Design, 13 (4), pp. 784-803.

Day, T., Pritchard, J. and Heath, A., 2010. Sowing the seeds of enhanced academic writing support in a research-intensive university. Educational Developments, 11 (3), pp. 18-21.

De Caso y Basalo, F.J., Nanni, A. and Ibell, T., 2011. ICE methodology for FRP characterisation. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 289-298.

Dhir, R. K., Newlands, M. D., McCarthy, M. J. and Paine, K. A., 2008. Harnessing fibres for concrete construction. Garston: IHS BRE Press.

Dhir, R. K., Zheng, L. and Paine, K. A., 2008. Measurement of early-age temperature rises in concrete made with blended cements. Magazine of Concrete Research, 60 (2), pp. 109-118.

Dhir, R. K. and Paine, K. A., 2010. Value added sustainable use of recycled and secondary aggregates in concrete. Indian Concrete Journal, 84 (3), pp. 7-26.

Dhir, R. K., Paine, K. A., de Brito, J. M. C. L., Etxeberria, M., Ho, N. Y., Poon, C. S. and Tam, V. W. Y., 2011. Use of recycled and secondary aggregates in concrete: an overview. In: Dhir, R. K. and Newlands, M. D., eds. New Developments in Concrete Construction. Mumbai: Shroff Publishers and Distributors, pp. 157-182.

Dubois, S., McGregor, F., Evrard, A., Heath, A. and Lebeau, F., 2014. An inverse modelling approach to estimate the hygric parameters of clay-based masonry during a Moisture Buffer Value test. Building and Environment, 81, pp. 192-203.

El-Turki, A., Ball, R. J. and Allen, G. C., 2009. The effect of carbonation on the mechanical and microstructural properties of lime and cement mortars. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Evernden, M., Darby, A. P. and Ibell, T. J., 2013. Engaging students with e-activities. The Structural Engineer, 91 (8), pp. 20-23.

Evernden, M. and Mottram, T., 2012. Double lap single and double bolt tension joints in PFRP leg angle connections. Submitted to: ICE Construction Materials

Evernden, M. and Mottram, T., 2009. A case for houses in the UK to be constructed of fibre reinforced polymer components. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT), 2009-09-06 - 2009-09-09, University of Bath.

Evernden, M. and Mottram, T., 2012. A case for houses to be constructed of FRP components. ICE Construction Materials, 165 (CM1), 1000002.

Evernden, M. and Pelly, R., 2009. Single bolt tension joints in pultruded PFRP leg angle connections. In: Advanced Composites in Construction 2009, ACIC 2009 - Proceedings of the 4th International Conference. , pp. 473-482.

Evernden, M. and Smith, J., 2011. Concentric and eccentric compression tests on PFRP equal angles. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 406-417.

Evernden, M. C. and Mottram, J. T., 2011. Closed-form equations for flange force and maximum deflection of box-beams of fiber reinforced polymer with partial shear interaction between webs and flanges. Advances in Structural Engineering, 14 (6), pp. 991-1004.

Fodde, E., Watanabe, K. and Fujii, Y., 2009. Learning from vernacular wisdom: Mud brick construction in Tajikistan. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09, Bath.

Fodde, E., Watanabe, K. and Fujii, Y., 2013. Measuring evaporation distribution of mud brick and rammed earth. Structural Survey Journal, 32 (1), pp. 32-48.

Fodde, E., 2010. Conservation and conflict in the central Asian silk roads. Journal of Architectural Conservation, 16 (1), pp. 75-94.

Fodde, E., 2008. Fired brick conservation in the Kyrgyz Silk Roads : The case of Burana's Mausoleum 4. Journal of Architectural Conservation, 14 (1), pp. 77-94.

Fodde, E., 2008. Structural Faults in Earthen Archaeological Sites in Central Asia: Analysis and Repair Methods. In: D'Ayala, D. F. and Fodde, E., eds. Proceedings of the 6th International Conference on Structural Analysis of Historic Construction. Vol. 2. Taylor & Francis, pp. 1415-1422.

Fodde, E., 2008. The influence of soluble salts on the decay of Moenjodaro, Pakistan. Structural Survey Journal, 26 (3), pp. 223-241.

Fodde, E., 2009. Traditional Earthen Building Techniques in Central Asia. International Journal of Architectural Heritage, 3 (2), pp. 145-168.

Fodde, E., Fujii, Y. and Watanabe, K., 2011. 3D visualization of historic earthen structures for the documentation of deterioration processes and conservation work: the case of the ancient Buddhist monastery of Ajina Tepa, Tajikistan. In: Terrasia 2011, International Conference on Earthen Architecture in Asia, 2011-10-11 - 2011-10-14, Mokpo, Republic of Korea.

Fodde, E. and Khan, M. S., 2014. Forthcoming. Affordable monsoon rain mitigation measures in the World Heritage site of Moenjodaro, Pakistan. International Journal of Architectural Heritage

Fodde, E., Watanabe, K. and Fujii, Y., 2011. Conservation and Documentation of the Buddhist Monastery of Ajina Tepa, Tajikistan: Heritage of the Silk Roads. In: Rainer, L., Bass Rivera, A. and Gandreau, D., eds. Terra 2008: 10th International Conference on the Study and Conservation of Earthen Architecture, 1-5 February, 2008, Bamako, Mali. , pp. 171-176.

Fujii, Y., Watanabe, K. and Fodde, E., 2008. Construction of Topographic Maps Using Close-range Photogrammetry for the Preservation of the Buddhist Monastery of Ajina Tepa, Tajikistan. In: International Symposium on Conservation of Ancient Sites 2008, an ISRM-Sponsored Regional Symposium, 2008-09-21 - 2008-09-24, Dunhuang.

Fujii, Y., Watanabe, K. and Fodde, E., 2008. Three-dimensional photogrammetric documentation of the Buddhist Monastery of Ajina Tepa, heritage of the Ancient Silk Roads. In: 43rd Japan National Conference on Geotechnical Engineering (JNCGE), 2008-01-01, Hiroshima.

Gai, X., Darby, A., Ibell, T. and Evernden, M. C., 2013. Experimental investigation into a ductile FRP stay-in-place formwork system for concrete slabs. Construction and Building Materials, 49, pp. 1013-1023.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2009. Development of a robust mechanical shear connector between FRP and concrete for FRP stay-in-place participating formwork. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15, Sydney.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. Experimental investigation of a novel FRP-concrete composite floor slab. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 192-203.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. FRP concrete composite floor slabs. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08, Warwick.

Gai, X., Darby, A., Ibell, T., Evernden, M. and Matthews, S., 2009. FRP stay-in-place participating formwork: design considerations and preliminary testing. In: Advanced Composites in Construction 2009, ACIC 2009. , pp. 376-387.

Gai, X., Ibell, T., Darby, A., Evernden, M. and Orr, J., 2011. Permanent participating FRP formwork for concrete floor slabs. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10), 2011-04-02 - 2011-04-04, Tampa, Florida.

Garbett, J., Darby, A. P. and Ibell, T. J., 2010. Optimised beam design using innovative fabric-formed concrete. Advances in Structural Engineering, 13 (5), pp. 849-860.

Gates, P., 2010. A newcomer's perspective. Elevation: The Journal of the Society of Facade Engineering

Gates, P., Darby, A., Evernden, M. and Ibell, T., 2011. An FRP durability study: Mechanical testing of panels from the Second Severn Visitors Centre. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08, Warwick.

Gates, P., Ibell, T., Darby, A. and Evernden, M., 2013. Polymeric facades : fatigue performance of pultruded panel connections. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013. Abingdon, U. K.: CRC Press, pp. 625-629.

Gates, P., Ibell, T., Darby, A., Evernden, M. and Kragh, M., 2012. Advanced composites for facade retrofit. The Structural Engineer, 90 (1), pp. 46-48.

Gates, P., Ibell, T., Darby, A., Evernden, M., Lo, S. N. G. and Kragh, M., 2012. Polymeric facades: advanced composites for retrofit. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. Proceedings of the 6th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VI 2012), Kingston, Ontario, Canada, 22-25 May 2011. Canadian Society for Civil Engineering (CSCE), pp. 101-108.

Glass, J., Dyer, T., Georgopoulos, C., Goodier, C., Paine, K., Parry, T., Baumann, H. and Gluch, P., 2013. Future use of life-cycle assessment in civil engineering. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 204-212.

Grist, E., Paine, K.a., Heath, A., Norman, J. and Pinder, H., 2014. Innovative solutions please, as long as they have been proved elsewhere : The case of a polished lime-pozzolan concrete floor. Case Studies in Construction Materials

Grist, E., Paine, K., Heath, A. and Pinder, H., 2013. An Investigation into the Viability and Benefits of Modern Hydraulic Lime Concretes. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction. New Delhi: Excel India Publishers, pp. 967-981.

Grist, E., Paine, K., Norman, J. and Heath, A., 2012. The feasibility and potential of modern hydraulic lime concretes. In: Concrete Structures for Sustainable Community, Fib Symposium, 2012-06-10 - 2012-06-14, Stockholm.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2013. Compressive strength development of binary and ternary lime-pozzolan mortars. Materials & Design, 52, pp. 514-523.

Gross, C. D. and Walker, P. J., 2014. Racking performance of timber studwork and hemp-lime walling. Construction and Building Materials,, 66 (15), pp. 429-435.

Gross, C., Harris, R., Walker, P. and Pritchett, I., 2012. Structural enhancement of timber stud framing using renewable insulation materials. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19, Auckland.

Gross, C., Walker, P. and Pritchett, I., 2013. Compression resistance of confined timber stud walls. Proceedings of the Institution of Civil Engineers: Construction Materials:, 166 (3), pp. 175-183.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Experimentally observed behaviour of CFRP sheet strengthening across a shear plane. In: 11th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-11), 2013-06-26 - 2013-06-28, Guimaraes.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Lifetime extension of reinforced concrete structures. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12, Belfast.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Repair and strengthening of reinforced concrete structures using advanced composites. In: Advanced Engineering Show 2012, 2012-11-07 - 2012-11-08, Birmingham.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12, Belfast.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings. , pp. 43-54.

Grusova, M., Ibell, T. J., Darby, A. P., Evernden, M. and Orr, J. J., 2014. Mechanics of failure in FRP strengthened reinforced concrete in shear. In: The Fourth International fib Congress, 2014-02-10 - 2014-02-14, Mumbai.

Hadi, M., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Performance of shear wall composed of LVL and cement fiber board sheathing. Journal of Asian Architecture and Building Engineering, 9 (2), pp. 463-469.

Harris, R., 2014. Engineered timber structures in the UK. In: 3ème Forum International Bois Construction, 2013-04-25 - 2013-04-26, Beaune.

Harris, R., Gusinde, B. and Roynon, J., 2012. Design and construction of the pods sports academy, Scunthorpe, England. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19, Auckland.

Harris, R., 2009. Prescriptive rules for timber: right and wrong applications. In: IABSE British Group Henderson Colloqium, 2009-07-01.

Harris, R., Gusinde, B. and Roynon, J., 2012. The Pods Sports Academy, Scunthorpe, England. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19, Auckland.

Harris, R., Roberts, P. and Hargreaves, I., 2010. Aligned with nature. Civil Engineering, 80 (11), p. 82.

Harris, R., Roberts, P. and Hargreaves, I., 2010. The John Hope Gateway Biodiversity Centre. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24, Riva del Garda.

Harris, R., Shanks, J., Hodson, T. and Borer, P., 2009. The Wales Institute for Sustainable Education (WISE): non-conventional materials in mainstream construction. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Heath, A. and Walker, P. J., 2013. Structural design for earth buildings. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation. Abingdon, U. K.: CRC Press, pp. 1901-1905.

Heath, A., Lawrence, M., Walker, P. and Fourie, C., 2009. The compressive strength of modern earth masonry. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09, Bath.

Heath, A., Maskell, D., Walker, P., Lawrence, M. and Fourie, C., 2012. Modern earth masonry : Structural properties and structural design. The Structural Engineer, 90 (4), pp. 38-44.

Heath, A., Paine, K., Goodhew, S., Ramage, M. and Lawrence, M., 2013. The potential for using geopolymer concrete in the UK. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 195-203.

Heath, A., Paine, K. and McManus, M., 2014. Minimising the global warming potential of clay based geopolymers. Journal of Cleaner Production, 78, pp. 75-83.

Heath, A., Walker, P., Fourie, C. and Lawrence, M., 2009. Compressive strength of extruded unfired clay masonry units. Proceedings of the Institution of Civil Engineers: Construction Materials, 162 (3), pp. 105-112.

Heath, A., Walker, P., Jaquin, P. and Lawrence, M., 2012. Render induced cracking of earth masonry. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 165 (8), pp. 435-442.

Heath, A., Zografou, A. and Walker, P. J., 2014. China clay waste as aggregate in AA cement mortars. Proceedings of the Institution of Civil Engineers: Construction Materials

Hirst, E., Brett, A., Thomson, A., Walker, P. and Harris, R., 2008. The structural performance of traditional oak tension and scarf joints. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05, Miyazaki.

Hirst, E., Walker, P., Paine, K. and Yates, T., 2010. Characterisation of low density hemp-lime composite building materials under compression loading. In: Second International Conference on Sustainable Construction Materials and Technologies, 2010-06-28 - 2010-06-30, Acona.

Hirst, E. A. J., Walker, P., Paine, K. A. and Yates, T., 2012. Characteristics of low density hemp-lime building materials. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (1), pp. 15-23.

Holley, J. C., Paine, K. A. and Papatzani, S., 2014. Forthcoming. Effects of nanosilica on the calcium silicate hydrates in Portland cement–fly ash systems. Advances in Cement Research

Holley, J., 2009. Sol-gel surface treatment on Adobe brick. In: SIMS XVII - 17th International Conference on Secondary Ion Mass Spectrometry, 2009, 2009-09-14 - 2009-09-18, Toronto.

Huang, P., Chang, W.-S., Shea, A., Ansell, M. P. and Lawrence, R. M. H., 2014. Non-homogeneous thermal properties of bamboo. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 657-664. (RILEM Bookseries; 9)

Ibell, T. J., 2014. Simulating reinforced concrete members. Part 1: Partial interaction properties. Proceedings of the Institution of Civil Engineers: Structures and Buildings

Ibell, T. J., Orr, J. J., Kostova, K., Darby, A. P. and Evernden, M., 2013. Extraordinary possibilities for future concrete structures. The IES Journal Part A: Civil & Structural Engineering, 6 (4), pp. 239-248.

Ibell, T. J., Orr, J. J., Kostova, K., Darby, A. P. and Evernden, M., 2013. Forthcoming. Extraordinary possibilities for future concrete structures. In: 8th Asia Pacific Conference on Structural Engineering: Future Cities, 2013-11-22, Singapore.

Ibell, T. J. and Walker, P. J., 2013. Editorial. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 187-188.

Ibell, T., 2010. Learning structural engineering. The Structural Engineer, 88 (8), pp. 17-19.

Ibell, T. and Darby, A., 2009. Fabric formwork for innovative concrete structures. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15, Sydney.

Ibell, T., Darby, A. and Denton, S. R., 2009. Plane section assumption for FRP-strengthened beams. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15, Sydney.

Ibell, T., Darby, A. and Denton, S., 2009. The goal for the FRP industry to be in Quadrant 1: ongoing research to assist in this quest. In: Advanced Composites in Construction 2009, ACIC 2009: Proceedings of the 4th International Conference. , pp. 31-40.

Ibell, T., Darby, A., Orr, J. and Evernden, M., 2010. The role of structural fabrics in a sustainable concrete infrastructure. In: International Conference on Sustainable Built Environment (ICSBE 2010), 2010-12-12 - 2010-12-14, Kandy.

Ioannou, S., Paine, K. A., Reig, L. and Quillin, K., 2015. Performance characteristics of concrete based on a ternary calcium sulfoaluminate-anhydrite- fly ash cement. Cement & Concrete Composites, 55, pp. 196-204.

Ioannou, S., Paine, K. and Quillin, K., 2012. Resistance of Supersulfated Cement Concrete to Carbonation and Sulfate Attack. In: Patricios, N. and Alifragkis, S., eds. Construction: Essays on Architectural History, Theory & Technology. Athens: Athens Institute for Education and Research, pp. 293-305.

Ioannou, S., Paine, K. and Quillin, K., 2011. Resistance of supersulfated cement concrete to carbonation and sulfate attack. In: 1st Annual International Conference on Construction, 2011-06-20 - 2011-06-23, Athens.

Ioannou, S., Paine, K. and Quillin, K., 2010. Strength and durability of calcium sulfoaluminate based concretes. In: International Conference on Non-Conventional Materials and Technologies: Ecological Materials and Technologies for Sustainable Building, 2010-09-21 - 2010-09-23, Cairo.

Ioannou, S., Reig, L., Paine, K. and Quillin, K., 2014. Properties of a ternary calcium sulfoaluminate-calcium sulfate-fly ash cement. Cement and Concrete Research, 56, pp. 75-83.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Response of FRP wrapped RC columns to impact loads. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 252-263.

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2013. Forthcoming. Influence of loading-rate on the failure mode of RC columns. Proceedings of the ICE-Engineering and Computational Mechanics

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2011. Plasticity based approach for evaluating the blast response of RC columns retrofitted with FRP. International Journal of Protective Structures (IJPS), 2 (3), pp. 367-380.

Isaac, P., Darby, A., Ibell, T. and Evernden, M., 2010. Plasticity-based approach for evaluating the blast response of RC columns retrofitted with FRP. In: First International Conference of Protective Structures (ICPS), 2010-09-29 - 2010-10-01, Manchester.

Isaac, P., Darby, A., Ibell, T. and Evernden, M., 2011. Retrofitting for reinforcement - reinforced concrete structures. Materials World, 19 (4), pp. 32-33.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Plasticity based approach to analyse the response of FRP wrapped columns subjected to impact loads. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08, Warwick.

Jeans, R., Paine, K., Ibell, T. and Darby, A., 2009. Chloride ingress into inter-tidal zone concrete repairs. Submitted to: Magazine of Concrete Research

Jung, K., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Improvement of glued-in-rod joint system using compressed wooden dowel. Holzforschung, 64 (6), pp. 799-804.

Kansara, K., Ibell, T. and Darby, A., 2009. Important issues towards the calibration of FRP-based flexural strengthening design criteria. In: 4th National Conference on Current trends in Technology (NUCONE – 2009), 2009-11-25 - 2009-11-27, Ahmedabad.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2010. Evaluation of FRP-based strengthening design criteria for concrete structures. In: 8th FIB International PhD Symposium in Civil Engineering, 2010-06-20 - 2010-06-23, Lyngby.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2010. Interpreting conservativeness in design criteria for flexural strengthening of concrete structures. International Journal of Concrete Structures and Materials, 4 (1), pp. 25-36.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2011. Quantifying safety in structural strengthening design guidelines. In: 2011 fib Symposium: Concrete Engineering for Excellence and Efficiency, 2011-06-08 - 2011-06-10, Prague.

Kansara, K., Ibell, T., Darby, A., Evernden, M. and Teng, J.-G., 2011. Conservativeness in FRP-based structural strengthening design process. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 168-179.

Kansara, K., Karusala, R. and , S. E. R. C. (C.), C., 2008. Durability Perspective for Concrete Structures in Codes of Practice. In: 3rd National Conference on Current Trends in Technology, NUCONE2008, 2008-11-01.

Kansara, K., Karusala, R. and , S. E. R. C. (C.), C., 2008. Probabilistic Limit-State of Depassivation for the Deteriorating Concrete Structures under Environmental Actions. In: 3rd National Conference on Current Trends in Technology, NUCONE2008, 2008-11-01.

Kansara, K., Ramanjaneyulu, K. and , S. E. R. C., C., 2008. Service-life-performance of RC bridges under environmental actions. Journal of the Institution of Engineers, 89 (November), pp. 55-62.

Kostova, K. Z., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Behaviour of fabric-formed concrete beams reinforced with FRP bars. In: Advanced Composites in Construction 2013, ACIC 2013. , pp. 286-297.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Advanced composite reinforcement for fabric-formed structural elements. In: Orr, J., Evernden, M., Darby, A. and Ibell, T., eds. Proceedings of the Second International Conference on Flexible Formwork: icff2012. Bath: The BRE Centre for Innovative Construction Materials, pp. 200-210.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Innovative structural systems for architecturally expressive and sustainable concrete structures. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. 6th International Conference on Advanced Materials in Bridges and Structures 2012 (ACMBS-VI 2012): Kingston, Ontario, Canada 22-25 May 2012. Montreal, QC: Canadian Society for Civil Engineering (CSCE), pp. 109-116.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Novel splayed anchorage system for internally reinforced concrete members. In: 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS-11), 2013-06-26 - 2013-06-28, Guimarães.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Sustainable concrete construction using fabric formwork. In: Future Build 2013, 2013-09-04 - 2013-09-06, Bath.

Lark, R., Al-Tabbaa, A. and Paine, K. A., 2013. Biomimetic multi-scale damage immunity for construction materials: M4L project overview. In: ICSHM 2013: Proceedings of the 4th International Conference on Self-Healing Materials, Ghent, Belgium, June 16-20, 2013. Ghent: Delft University of Technology, pp. 400-404.

Lawrence, M., Heath, A. and Walker, P., 2008. Modern innovations with unfired clay masonry. In: Proceedings of 8th International Seminar on Structural Masonry (ISSM 08), 2008-11-05 - 2008-11-08, Istanbul.

Lawrence, M. and Walker, P., 2008. The Measurement of the Carbonation Profile in Lime Mortars using a Drilling Resistance Measurement System. In: Proceedings of the 11th International Congress on Deterioration and Conservation of Stone, 2008-09-15 - 2008-09-20, Toruń.

Lawrence, M., Drinkwater, L., Heath, A. and Walker, P., 2009. Racking shear resistance of prefabricated straw-bale panels. Proceedings of the Institute of Civil Engineers: Construction Materials, 162 (3), pp. 133-138.

Lawrence, M., Shea, A., Walker, P. and De Wilde, P., 2013. Hygrothermal performance of bio-based insulation materials. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 257-263.

Lawrence, M., Fodde, E., Paine, K. and Walker, P., 2012. Hygrothermal performance of an experimental hemp-lime building. Key Engineering Materials, 517, pp. 413-421.

Lawrence, M., Heath, A. and Walker, P., 2009. Determining moisture levels in straw bale construction. Construction and Building Materials, 23 (8), pp. 2763-2768.

Lawrence, M., Heath, A. and Walker, P., 2009. Monitoring of the Moisture Content of Straw Bale Walls. In: Howlett, R. J., Lakhmi, C. J. and Shaun, H. L., eds. Sustainability in Energy and Buildings: Proceedings of the International Conference in Sustainability in Energy and Buildings (SEB'09). Vol. Part 3. Berlin Heidelberg: Springer, pp. 155-164.

Lawrence, M., Heath, A. and Walker, P., 2013. Development of a novel mortar for use with unfired clay bricks. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (1), pp. 18-26.

Lawrence, M., Heath, A. and Walker, P., 2009. The impact of external finishes on the weather resistance of straw bale walls. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09, Bath.

Lawrence, R. M. H. and Walker, P., 2008. The impact of the water/lime ratio on the structural characteristics of air lime mortars. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom. London: Taylor & Francis, pp. 885-889.

Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. Determination of carbonation profiles in non-hydraulic lime mortars using thermogravimetric analysis. Thermochimica Acta, 444 (2), pp. 179-189.

Li, K. and Darby, A., 2010. An approach to the design of buffer for a buffered impact damper. Structural Control and Health Monitoring, 17 (1), pp. 68-82.

Lombillo, I., Villegas, L., Fodde, E. and Thomas, C., 2014. In situ mechanical investigation of rammed earth : calibration of minor destructive testing. Construction and Building Materials, 51, pp. 451-460.

Mackenzie, C., Ormondroyd, G., Curling, S., Ball, R. J., Whiteley, N. and Malham, S., 2014. Ocean warming, more than acidification, reduces shell strength in a commercial shellfish species during food limitation. PLoS ONE, 9 (1), e86764.

Madhoushi, M., Chavooshi, A., Ashori, A., Ansell, M. P. and Shakeri, A., 2014. Properties of wood plastic composite panels made from waste sanding dusts and nanoclay. Journal of Composite Materials, 48 (14), pp. 1661-1669.

Maniatidis, V. and Walker, P., 2008. Structural capacity of rammed earth in compression. Journal of Materials in Civil Engineering, 20 (3), pp. 230-238.

Margalha, M. G., Silva, A. S., Do Rosário Veiga, M., De Brito, J., Ball, R. J. and Allen, G. C., 2013. Microstructural changes of lime putty during aging. Journal of Materials in Civil Engineering, 25 (10), pp. 1524-1532.

Maskell, D., Heath, A. and Walker, P. J., 2014. Comparing the environmental impact of stabilisers for unfired earth construction. Key Engineering Materials, 600, pp. 132-143.

Maskell, D., Heath, A. and Walker, P. J., 2014. Geopolymer stabilisation of unfired earth masonry units. Key Engineering Materials, 600, pp. 175-185.

Maskell, D., Heath, A. and Walker, P. J., 2014. Forthcoming. Inorganic Stabilisation Methods for Extruded Earth Masonry Units. Construction and Building Materials

Maskell, D., Heath, A. and Walker, P. J., 2013. Suitable stabilisation methods for extruded earth masonry. In: Central Europe towards Sustainable Building 2013 (CESB 13), 2013-06-26 - 2013-06-28, Prague.

Maskell, D., Walker, P. J., Thomson, A., Gross, C. D., Beadle, K. and Mander, T., 2014. Forthcoming. Structural development and testing of a prototype house using timber and straw bales. ICE Proceedings Structures & Buildings

Maskell, D., Heath, A. and Walker, P., 2012. Durable Structural Extruded Earth Masonry Units. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07, Weimar.

Maskell, D., Heath, A. and Walker, P., 2013. Laboratory scale testing of extruded earth masonry units. Materials & Design, 45, pp. 359-364.

McCombie, P., 2009. Critical failure Surface Location using Simple Genetic Algorithm and Multiple Wedge Slope Stability. In: First International Symposium on Computational Geomechanics, 2009-04-29 - 2009-05-01, Juan-les-Pins.

McCombie, P., 2012. Market Research for Centres of Excellence in Building Engineering Physics. University of Bath.

McCombie, P. F., 2009. Displacement based multiple wedge slope stability analysis. Computers and Geotechnics, 36 (1-2), pp. 332-341.

McGregor, F., Heath, A., Fodde, E. and Shea, A., 2014. Conditions affecting the moisture buffering measurement performed on compressed earth blocks. Building and Environment, 75, pp. 11-18.

Mcgregor, F., Heath, A., Ayre, G., Fodde, E. and Walker, P., 2012. The effect of stabilisation on humidity buffering of earth walls. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07, Weimar.

Mokhtari Taleghani, E., Vatandoust, R. and Amirjamshidi, G., 2012. From threat to opportunity: The case of Bam. In: XIth International Conference on the Study and Conservation of Earthen Architectural Heritage, Terra, 2012-04-01, Lima.

Molesworth, I., Walker, P. and Fodde, E., 2012. Structural evaluation of a novel solution for sustainable masonry construction. In: 15th International Brick and Block Masonry Conference, 2012-06-03 - 2012-06-06, Florianopolis.

Molesworth, I. and Walker, P., 2010. Sustainable masonry constructions : Initial structural tests of brick and hemp-lime composite walls. Mauerwerk, 14 (3), pp. 161-166.

Moran, F., Blight, T., Natarajan, S. and Shea, A., 2014. The use of Passive House Planning Package to reduce energy use and CO emissions in historic dwellings. Energy and Buildings, 75, pp. 216-227.

Morgan, R. C. and Ball, R. J., 2013. Environmental (wet and dry) cycling of hydraulic lime mortars. Journal of the Building Limes Forum, 20, pp. 21-31.

Mundell, C., McCombie, P. F., Bailey, C., Heath, A. and Walker, P., 2009. Limit-equilibrium assessment of drystone retaining structures. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 162 (4), pp. 203-212.

Mundell, C., McCombie, P. F., Heath, A., Harkness, J. and Walker, P., 2010. Behaviour of drystone retaining structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 163 (1), pp. 3-12.

Mundell, C., McCombie, P., Heath, A. and Walker, P., 2009. Drystone retaining walls: From full-scale testing to construction requirements. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09, Bath.

Mundell, C., Mccombie, P., Heath, A., Harkness, J. and Walker, P., 2008. Large Scale Testing of Drystone Retaining Walls. In: D'Ayala, D. F. and Fodde, E., eds. VI International Conference on Structural Analysis of Historic Construction (SAHC08), 2008-07-02 - 2008-07-04, Bath.

Murakami, S., Kitamori, A., Jung, K., Chang, W.-S. and Komatsu, K., 2012. Prediction of Reinforcement Effect by Screw on Triangular Embedment Perpendicular to the Grain with Variation of Screw Locations. Open Journal of Civil Engineering, 2 (1), pp. 167-173.

Nacif, G. L., Panzera, T. H., Strecker, K., Christoforo, A. L. and Paine, K., 2013. Investigations on cementitious composites based on rubber particle waste additions. Materials Research, 16 (2), pp. 259-268.

Naicu, D., Harris, R. and Williams, C., 2014. Timber Gridshells : Design methods and their application to a temporary pavilion. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14, Quebec City.

Newlands, M. D., Paine, K. A., Vemuri, N. A. and Dhir, R. K., 2008. A linear test method for determining early-age shrinkage of concrete. Magazine of Concrete Research, 60 (10), pp. 747-757.

Nordby, A. S. and Shea, A. D., 2013. Building materials in the operational phase : Impacts of direct carbon exchanges and hygrothermal effects. Journal of Industrial Ecology, 17 (5), pp. 763-776.

Nuño, M., Ball, R. J. and Bowen, C. R., 2014. Study of solid/gas phase photocatalytic reactions by electron ionization mass spectrometry. Journal of Mass Spectrometry, 49 (8), pp. 716-726.

Orr, J. J., Darby, A. P., Ibell, T. J. and Evernden, M., 2014. Forthcoming. Design methods for flexibly formed concrete beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings

Orr, J. J., Darby, A. P., Ibell, T. J. and Evernden, M., 2014. Performance based design of low-carbon concrete structures. In: The Fourth International fib Congress, 2014-02-10 - 2014-02-14, Mumbai.

Orr, J. J., Ibell, T. J., Darby, A. P. and Evernden, M., 2014. Shear behaviour of non-prismatic steel reinforced concrete beams. Engineering Structures, 71, pp. 48-59.

Orr, J. J., Darby, A. P., Ibell, T. J., Denton, S. R. and Shave, J. D., 2010. Shear design of circular concrete sections using the Eurocode 2 truss model. The Structural Engineer, 88 (23-24), pp. 26-33.

Orr, J., Darby, A., Ibell, T. J. and Evernden, M., 2012. Flexible formwork for visual concrete. Concrete, 46 (5), pp. 14-16.

Orr, J., Darby, A., Ibell, T., Evernden, M., Lava, P. and Debruyne, D., 2013. The shear behaviour of non-prismatic reinforced concrete beams determined using digital image correlation. In: 5th International Conference on Optical Measurement Techniques for Systems & Structures. .

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2012. Durability enhancements using fabric formwork. In: Fédération Internationale du Béton Symposium: Concrete Structures for Sustainable Community, 2012-06-11 - 2012-06-14, Stockholm.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2013. Durability enhancements using fabric formwork. Magazine of Concrete Research, 65 (20), pp. 1236-1245.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2012. Fabric formwork for ultra high performance fibre reinforced concrete structures. In: Fédération Internationale du Béton Symposium: Concrete Structures for Sustainable Community, 2012-06-11 - 2012-06-14, Stockholm.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2011. Fibre reinforced polymer grids as shear reinforcement in fabric formed concrete beams. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 72-83.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2011. Innovative reinforcement for fabric formed concrete structures. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10), 2011-04-02 - 2011-04-04, Tampa, Florida.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2012. Optimisation and durability in fabric cast 'Double T' beams. In: Second International Conference on Flexible Formwork (icff2012), 2012-06-27 - 2012-06-29, University of Bath.

Orr, J., Darby, A., Ibell, T., Evernden, M. and Otlet, M., 2011. Concrete structures using fabric formwork. Atkins Technical Journal, 7 (1), 112.

Orr, J., Ibell, T., Darby, A. and Evernden, M., 2013. Extraordinary possibilities using fabric to form concrete structures. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation. Abingdon, U. K.: Taylor & Francis, pp. 813-818.

Orr, J., Ibell, T. and Darby, A., 2010. Innovative concrete structures using fabric formwork. In: Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010), 2010-09-06 - 2010-09-08, Cape Town.

Orr, J., Ibell, T., Darby, A. and Evernden, M., 2010. Fibre reinforced polymer reinforcement for fabric formed concrete structures. FRP International, 7 (1), pp. 4-5.

Orr, J. J., Darby, A. P., Ibell, T. J., Evernden, M. C. and Otlet, M., 2011. Concrete structures using fabric formwork. The Structural Engineer, 89 (8), pp. 20-26.

Paganoni, S. and D'Ayala, D., 2009. Development and testing of dissipative anchor devices for the seismic protection of heritage buildings. In: ANCER Workshop 2009, 2009-08-13 - 2009-08-14, University of Illinois, Urbana-Champaign, IL.

Paine, K., Ioannou, S., Abora, K. and Quillin, K., 2013. Low Carbon Concrete: Research with Non-Portland Cements. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction. New Delhi: Excel India Publishers, pp. 749-762.

Paine, K. A., 2010. Recycled aggregates for concrete : Production, properties and characteristics. The Masterbuilder, 12 (3), pp. 118-124.

Paine, K. A., 2009. Recycled aggregates in concrete : Fundamentals, knowledge and practice. The Masterbuilder, 11 (7), pp. 86-90.

Paine, K. A., 2008. Research towards sustainable concrete. In: Concrete and Steel Yearbook 2008-09. Cheshire, UK: Ten Alps Publishing, p. 9.

Paine, K. A., Collery, D. J. and Dhir, R. K., 2009. Strength and deformation characteristics of concrete containing coarse recycled and manufactured aggregates. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Paine, K. A., Darby, A. P., Ibell, T. J., Evernden, M., Ioannou, S. and Orr, J. J., 2010. Concrete materials and structures research at the University of Bath. Concrete, 44 (6), pp. 55-57.

Paine, K. A. and Dhir, R. K., 2010. Recycled aggregates in concrete: a performance related approach. Magazine of Concrete Research, 62 (7), pp. 519-530.

Paine, K. A., Dhir, R. K., Halliday, J. E., Zheng, L., Collery, D. J. and Rai, H. S., 2011. Use of recycled and secondary aggregates in concrete: engineering and environmental considerations. In: Newlands, M. D. and Dhir, R. K., eds. Concrete for High Performance Sustainable Infrastructure. Mumbai: Shroff Publishers and Distributors, pp. 77-86.

Panzera, T. H., Rubio, J. C., Bowen, C. R. and Walker, P. J., 2008. Microstructural design of materials for aerostatic bearings. Cement & Concrete Composites, 30 (7), pp. 649-660.

Panzera, T. H., Strecker, K., Assis, M. A. O., Paine, K. A. and Walker, P., 2009. Recycling of rubber waste into cementitious composites. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Papatzani, S., Paine, K. A. and Holley, J. C., 2014. The effect of the addition of nanoparticles of silica on the strength and microstructure of blended Portland cement pastes. In: 2014 International Concrete Sustainability Conference, 2014-05-12 - 2014-05-14, Boston.

Pearson, H., Evernden, M. and Harris, R., 2012. Analysis of engineered timber panels using a strut and tie model for use in folded plate structures and deep beams. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19, Auckland.

Pearson, H., Evernden, M. and Harris, R., 2012. Effect of Timber Grain Orientation on Bonded-In Rod Connection Systems. Key Engineering Materials, 517 (1), pp. 695-704.

Perera, K., Ibell, T. and Darby, A., 2009. Bond behaviour of various shapes of NSM CFRP bars and concrete. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15, Sydney.

Perera, K., Ibell, T. and Darby, A., 2013. Bond characteristics of near surface mounted CFRP bars. Construction and Building Materials, 43, pp. 58-68.

Perera, K., Ibell, T., Darby, A. and Denton, S., 2009. Bond mechanisms of various shapes of NSM CFRP bars. In: Advanced Composites in Construction 2009, ACIC 2009 - Proceedings of the 4th International Conference. , pp. 250-258.

Pesce, G. L., Bowen, C. R., Rocha, J., Sardo, M., Allen, G. C., Walker, P. J., Denuault, G., Serrapede, M. and Ball, R., 2014. Monitoring hydration in lime-metakaolin composites using electrochemical impedance spectroscopy and nuclear magnetic resonance spectroscopy. Clay Minerals, 49 (3), pp. 341-358.

Pesce, G. L. A., Ball, R. J., Quarta, G. and Calcagnile, L., 2012. Identification, extraction, and preparation of reliable lime samples for 14C dating of plasters and mortars with the “pure lime lumps” technique. Radiocarbon, 54 (3-4), pp. 933-942.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Russell, M., ed. 32nd Cement & Concrete Science Conference, 17-18 September 2012, Queens University Belfast, Belfast. , pp. 116-121.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Ferreira, V. M., Dias, A. B., Afonso, A. S. and de Brito, J., eds. Congress of Innovation on Sustainable Construction (CINCOS'12), 20-22 September 2012, University of Aveiro, Portugal. , pp. 319-328.

Pesce, G. L., Morgan, D., Odgers, D., Henry, A., Allen, M. and Ball, R. J., 2013. Consolidation of weathered limestone using nanolime. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 213-228.

Prajer, M. and Ansell, M.P., 2014. Bio-composites for structural applications : Poly-l-lactide reinforced with long sisal fiber bundles. Journal of Applied Polymer Science, 131 (21).

Prajer, M. and Ansell, M., 2012. Observation of transcrystalline growth of PLA crystals on sisal fibre bundles and the effect of crystal structure on interfacial shear strength. Composite Interfaces, 19 (1), pp. 39-50.

Price, N. and Heath, A., 2013. Quality control of earth construction in developing areas. Proceedings of the Institution of Civil Engineers: Construction Materials

Raw-Rees, S., Pesce, G. L. A., Ball, R. J. and Fodde, E., 2012. Characterization of binders in the historic lime mortars and plasters from 1A Royal Crescent, Bath. Journal of the Building Limes Forum, 19, pp. 28-37.

Reynolds, T., Harris, R. and Chang, W., 2014. Nonlinear pre-yield modal properties of timber structures with large-diameter steel dowel connections. Engineering Structures, 76, pp. 235-244.

Reynolds, T., Harris, R. and Chang, W.-S., 2012. Dynamic stiffness and damping of dowel-type connections for timber structures under service conditions. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19, Auckland.

Reynolds, T., Chang, W. and Harris, R., 2011. Wind-induced vibration of tall timber buildings. In: 2011 IASS Annual Symposium: IABSE-IASS 2011: Taller, Longer, Lighter, 2011-09-20 - 2011-09-23, London.

Reynolds, T., Chang, W.-S. and Harris, R., 2013. In-service dynamic stiffness of dowel-type connections. In: 46th Meeting of CIB W18 on Timber Structures, 2013-08-19 - 2013-10-24, Vancouver.

Reynolds, T., Harris, R. and Chang, W.-S., 2013. An analytical model for embedment stiffness of a dowel in timber under cyclic load. European Journal of Wood and Wood Products, 71 (5), pp. 609-622.

Reynolds, T., Harris, R. and Chang, W.-S., 2012. Dynamic behaviour of timber perpendicular to the grain in dowel-type connections. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19, Auckland.

Reynolds, T., Harris, R. and Chang, W.-S., 2014. Stiffness of dowel-type timber connections under pre-yield oscillating loads. Engineering Structures, 65, pp. 21-29.

Reynolds, T., Harris, R. and Chang, W.-S., 2013. Viscoelastic embedment behaviour of dowels and screws in timber under in-service vibration. European Journal of Wood and Wood Products, 71 (5), pp. 623-634.

Roseley, A., Ansell, M.P., Smedley, D. and Porter, S., 2012. Creep of thixotropic adhesives in bonded-in timber connections as a function of temperature and humidity. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 5. , pp. 377-378.

Serrapede, M., Denuault, G., Sosna, M., Pesce, G.L. and Ball, R.J., 2013. Scanning electrochemical microscopy : using the potentiometric mode of SECM to study the mixed potential arising from two independent redox processes. Analytical Chemistry, 85 (17), pp. 8341-8346.

Serrapede, M., Pesce, G. L., Ball, R. J. and Denuault, G., 2014. Nanostructured Pd hydride microelectrodes : In situ monitoring of pH variations in a porous medium. Analytical Chemistry, 86 (12), pp. 5758-5765.

Shanks, J., Walker, P. and Harris, R., 2008. Development of rational guidelines for traditional joints in oak frame. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05, Miyazaki.

Sharma, G. D., Prakash Singh, S., Nagarjuna, P., Mikroyannidis, J. A., Ball, R. J. and Kurchania, R., 2013. Efficient dye-sensitized solar cells based on cosensitized metal free organic dyes with complementary absorption spectra. Journal of Renewable and Sustainable Energy, 5 (4), 043107.

Sharma, G. D., Singh, S. P., Kurchania, R. and Ball, R. J., 2013. Cosensitization of dye sensitized solar cells with a thiocyanate free Ru dye and a metal free dye containing thienylfluorene conjugation. RSC Advances, 3 (17), pp. 6036-6043.

Shave, J., Bennetts, J., Orr, J. J. and Darby, A. P., 2013. Shear strengthening of rectangular and circular concrete members using FRP. In: Advanced Composites in Construction (ACIC 2013), 2013-09-10 - 2013-09-12, Belfast.

Shea, A. D., Lawrence, M. and Walker, P., 2012. Hygrothermal performance of an experimental hemp-lime building. Construction and Building Materials, 36, pp. 270-275.

Shea, A. D., Wall, K. and Walker, P., 2013. Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system. Building Services Engineering Research and Technology, 34 (4), pp. 369-380.

Skinner, J., Bregulla, J., Harris, R., Paine, K. and Walker, P., 2013. Forthcoming. Screw connectors for thin topping, timber-concrete composites. Materials and Structures

Skinner, J., Harris, R., Paine, K., Walker, P. and Bregula, J., 2012. The Characterisation of Connectors for the Upgrade of Timber Floors with Thin Structural Toppings. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19, Auckland.

Skinner, J., Harris, R., Paine, K., Walker, P. and Bregulla, J., 2013. Ultra-thin topping upgrades for improved serviceability performance. Advanced Materials Research, 778, pp. 673-681.

Skinner, J., Martin, C., Bregulla, J., Harris, R., Paine, K. A., Walker, P. and Dias, A. M. P. G., 2014. Concrete upgrade to improve vibration response of timber floor. ICE Proceedings Structures & Buildings, 167 (9), 1300057.

Skinner, J., Martins, C., Bregula, J., Harris, R., Paine, K. A., Walker, P. J. and Dias, A., 2014. Concrete upgrade to improve the vibration response of timber floors. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (SB9), 1300057.

Smedley, D., Tiew, J., Roseley, A., Ahmad, Z. and Ansell, M.P., 2012. Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 1. , pp. 502-503.

Sullivan, P. and McCombie, P., 2013. Optimisation of tidal power arrays using a genetic algorithm. Proceedings of the Institution of Civil Engineers - Energy, 166 (1), pp. 19-28.

Tajaddini, A., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. A parametric study on moment redistribution in FRP-strengthened continuous RC beams. In: 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS-11), 2013: Conference Proceedings. , pp. 203-204.

Tajaddini, A., Ibell, T., Darby, A. and Evernden, M., 2013. Moment redistribution in "anchored" FRP-strengthened continuous RC beams : a theorectical study. In: Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings. , pp. 55-65.

Thomson, A. and Walker, P. J., 2013. Condition monitoring and durability assessment of straw bale construction. In: Braganca, L., Pinheiro, M. and Mateus, R., eds. Portugal SB13: Contribution of Sustainable Building to Meet EU 20-20-20 Targets. , pp. 791-798.

Thomson, A. and Walker, P. J., 2014. Durability characteristics of straw bales in building envelopes. Construction and Building Materials, 68, pp. 135-141.

Thomson, A., Harris, R., Ansell, M. and Walker, P., 2010. Development of non-metallic timber connections for contemporary applications. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24, Riva del Garda.

Thomson, A., Harris, R., Ansell, M. and Walker, P., 2010. Experimental performance of non-metallic mechanically fastened timber connections. The Structural Engineer, 88 (17), pp. 25-32.

Thomson, A., Harris, R., Walker, P., Ansell, M. and Chang, W. S., 2009. Contemporary metal free dowel connections for timber structures. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09, Bath.

Thomson, A., Pope, D. and Walker, P., 2008. Erosion characteristics of rammed earth. In: Kerpic'08: international conference: Learning from earthen architecture in climate change, 2008-09-04 - 2008-09-05, Cyprus International University.

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Ansell, M., Wilen, C. E. and Toivakka, M., 2012. Forthcoming. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of porous composites. Progress in Organic Coatings

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Toivakka, M., Ansell, M.P. and Wilen, C.E., 2013. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of pigment coating. Progress in Organic Coatings, 76 (1), pp. 101-106.

Trujillo, D. J. A., Ramage, M. and Chang, W.-S., 2013. Lightly modified bamboo for structural applications. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 238-247.

Tyas-Susanti, B., Fodde, E. and D'Ayala, D., 2011. The role of community participation : learning from the Chinese heritage of Java, Indonesia. In: ICOMOS International Conference 2011: Asian Urban Heritage, 2011-10-15 - 2011-10-17, Phuket.

Valerio, P., James, T., Darby, A.P. and Tedbury, G.E., 2014. Discussion. Proceedings of the Institution of Civil Engineers - Bridge Engineering, 167 (1), p. 75.

Valerio, P., Ibell, T. and Darby, A., 2009. Deep embedment of FRP for concrete shear strengthening. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 162 (5), pp. 311-321.

Vemuri, N. A., Newlands, M. D., Paine, K. A. and Dhir, R. K., 2009. Early-Age Shrinkage of CEM I and Fly Ash Combinations Using a New Linear Test Method. In: 2nd International RILEM Workshop on Concrete Durability and Service Life Planning (ConcreteLife’09), 2009-09-07 - 2009-09-09, Haifa.

Walker, P. J., Harris, R. and Thomson, A., 2013. Contemporary non-metallic timber connections. Other. TRADA. (TRADA Research Summary)

Walker, P. J. and Thomson, A., 2013. Development of prefabricated construction products to increase use of natural materials. In: Central Europe towards Sustainable Building 2013 (CESB 13), 2013-06-26 - 2013-06-28, Prague.

Walker, P., 2012. Editorial. Proceedings of Institution of Civil Engineers: Construction Materials, 165 (5), pp. 261-262.

Walker, P., 2011. BRE and University of Bath: Low impact materials case studies and information papers. BRE.

Walker, P., 2012. Low Carbon Renewable Building Materials. University of Bath.

Walker, P., 2012. Sustainable architecture and building materials with low environmental impact. University of Bath.

Walker, P., 2008. Growing your own building: Developments in straw and hemp construction. In: Proceedings of the 10th International Conference on Non-Conventional Materials and Technologies (NOCMAT), 2008-11-01, Cali.

Walker, P., Heath, A. and Lawrence, R. M. H., 2008. Modern innovations in unfired clay masonry in the UK. In: Proceedings of the 10th International Conference on the Study and Conservation of Earthen Architectural Heritage, 2008-02-01 - 2008-02-05, Bamako.

Wall, K., Walker, P., Gross, C., White, C. and Mander, T., 2012. Development and testing of a prototype straw bale house. Proceedings of the Institution of Civil Engineers: Construction Materials, 165 (6), pp. 377-384.

Wang, J., Heath, A. and Walker, P., 2013. Experimental investigation of brickwork behaviour under shear, compression and flexure. Construction and Building Materials, 48, pp. 448-456.

Wang, J., Heath, A. and Walker, P. J., 2014. Numerical analysis of triplet shear test on brickwork masonry. In: Al-Bahar, S. K. and Zhao, J. Y., eds. Advances in Civil Engineering and Building Materials III. Trans Tech Publications, pp. 437-441. (Advanced Materials Research; 831)

Watanabe, K., Fujii, Y. and Fodde, E., 2008. Conservation of the Buddhist Monastery of Ajina Tepa, Heritage of the Ancient Silk Road (in Japanese). In: Construction, Technology and Conservation of Historical Earthen Structure. , p. 7.

Watanabe, K., Maung, M., Fujii, Y. and Fodde, E., 2008. Evaporation measurement for the preservation of the Buddhist Monastery of Ajina Tepa, Tajikistan. Annual Journal of Hydraulic Engineering, JSCE, 52, pp. 19-24.

Ye, S. Y., Hsu, M. F., Chang, W. S. and Chen, J. L., 2011. Life cycle assessment of timber components in Taiwan traditional temples. In: Proceedings of the 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12. Vol. 14. Oxford: Elsevier, pp. 2683-2691. (Procedia Engineering)

Yeo, S. Y., Hsu, M. F., Komatsu, K. and Chang, W. S., 2013. Dynamic characteristics of Taiwanese traditional Dieh-Dou timber structures. In: STREMAH 2013, 2013-06-25 - 2013-06-27, New Forest, UK.

Yeo, S. Y., Chang, W.-S., Hsu, M.-F. and Komatsu, K., 2011. The structural behaviour of timber frame under various roof weights – using Taiwanese traditional Die-Dou timber frame as case study. In: East Asian Architectural Culture International Conference (EAAC 2011), 2011-05-12 - 2011-05-14, Singapore.

Yeo, S. Y., Komatsu, K., Hsu, M.-F., Chang, W.-S., Wakita, T. and Kataoka, Y., 2013. A Preliminary Study on the Structural Stiffness of Taiwanese Traditional Dieh-Dou Asymmetric Timber Frame. In: The 63th Annual meeting of the JWRS, 2013-03-27 - 2013-03-29.

Zhang, H., Watanabe, K., Fuji, Y. and Fodde, E., 2009. Earthen Structures Documentation in Ajina Tepa, Tajisistan: The Use of 3D Photogrammetry. In: International Symposium on Engineering,Energy and Environment (ISEEE 2009), 2009-11-26, Rayong.

Zheng, L., Paine, K. A. and Dhir, R. K., 2008. Effect of weather on early-age temperature rises in concrete. In: Dhir, R. K., Newlands, M. D., Dyer, T. D. and Tang, M. C., eds. Proceedings of the International Conference, Dundee, July 2008: Designing concrete for the visual environment.EP 89 ed. IHS BRE Press, pp. 33-44.

Zhou, Z., Walker, P. and D'Ayala, D., 2008. Strength characteristics of hydraulic lime mortared brickwork. Proceedings of Institution of Civil Engineers, Construction Materials, 161 (4), pp. 139-146.

Zhou, Z., Walker, P. and D'Ayala, D., 2008. Flexural bond strength development of brickwork using natural hydraulic lime (NHL) mortar. In: 14th International Brick & Block Masonry Conference, 2008-02-17 - 2008-02-20, Sydney.

Zhou, Z., Walker, P. and D'Ayala, D., 2008. Influence of materials on mortar and bond strength of hydraulic lime mortared brickwork. In: Proceedings of the 8th International Seminar on Structural Masonary (ISSM08), 2008-11-05 - 2008-11-08, Istanbul.

de Caso y Bassalo, F., Nanni, T. and Ibell, T., 2011. Investigation of circumferential strain experimental methodology for FRP characterisation. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08, Warwick.

This list was generated on Wed Oct 22 16:33:40 2014 IST.