Research

Items from Research Centres & Institutes > BRE Centre in Innovative Construction Materials

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level: 466.

Book/s

Ansell, M. P., 2015. Wood composites. Woodhead Publishing Ltd.. (Woodhead Publihsing Series in Composites Science and Engineering; 54)

Bevan, R., Woolley, T., Pritchett, I., Carpenter, R., Walker, P. and Duckett, M., 2008. Hemp Lime Construction: a guide to building with hemp lime composites. BRE Press.

Dhir, R. K., Newlands, M. D., McCarthy, M. J. and Paine, K. A., 2008. Harnessing fibres for concrete construction. IHS BRE Press.

McCombie, P., Morel, J.-C. and Garnier, D., 2015. Drystone Retaining Walls - Design, Construction and Assessment.Vol. 1. CRC press Taylor and Francis.

Orr, J., 2010. Structural Innovation in Europe. University of Bath.

Book Sections

Adriaenssens, S., Barnes, M., Harris, R. and Williams, C., 2014. Dynamic relaxation:design of a strained timber gridshell. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 89-102.

Ansell, M. P., 2015. Wood microstructure:a cellular composite. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 3-26. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M.P., 2014. Natural fibre composites in a marine environment. In: Natural Fibre Composites. Woodhead Publishing Ltd., pp. 365-374.

Ansell, M. P., 2015. Carbonised and mineralised wood composites. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 395-409. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M. P., 2015. Hybrid wood composites-integration of wood with other engineering materials. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 411-426. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M. P., 2015. Preface. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., xvii-xviii. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Aziz, S.H. and Ansell, M.P., 2004. Optimising the properties of green composites. In: Green Composites. Woodhead Publishing Ltd., pp. 154-180.

Brandon, D., Ansell, M. P., Harris, R., Walker, P. and Bregulla, J., 2014. Modelling of non-metallic timber connections at elevated temperatures. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 231-241. (RILEM Bookseries; 9)

Briggs, K., 2010. Charing embankment: climate change impacts on embankment hydrology. In: Ground Engineering Magazine. , pp. 28-31.

Briggs, K., Smethurst, J. and Powrie, W., 2014. Modelling the influence of tree removal on embankment slope hydrology. In: Sassa, K., Canuti, P. and Yin, Y., eds. Landslide Science for a Safer Geoenvironment. Springer, pp. 241-246.

Chang, W. and Nearchou, N., 2013. Investigation of the potential of hot-pressed wood in all-timber connections. In: Schober, K.-U., ed. Innovative timber composites – improving wood with other materials. , pp. 21-25.

Dhir, R. K., Paine, K. A., de Brito, J. M. C. L., Etxeberria, M., Ho, N. Y., Poon, C. S. and Tam, V. W. Y., 2011. Use of recycled and secondary aggregates in concrete: an overview. In: Dhir, R. K. and Newlands, M. D., eds. New Developments in Concrete Construction. Mumbai: Shroff Publishers and Distributors, pp. 157-182.

Fodde, E., 2008. Structural Faults in Earthen Archaeological Sites in Central Asia: Analysis and Repair Methods. In: D'Ayala, D. F. and Fodde, E., eds. Proceedings of the 6th International Conference on Structural Analysis of Historic Construction.Vol. 2. Taylor & Francis, pp. 1415-1422.

Fodde, E., Watanabe, K. and Fujii, Y., 2011. Conservation and Documentation of the Buddhist Monastery of Ajina Tepa, Tajikistan: Heritage of the Silk Roads. In: Rainer, L., Bass Rivera, A. and Gandreau, D., eds. Terra 2008: 10th International Conference on the Study and Conservation of Earthen Architecture, 1-5 February, 2008, Bamako, Mali. , pp. 171-176.

Gates, P., Ibell, T., Darby, A., Evernden, M., Lo, S. N. G. and Kragh, M., 2012. Polymeric facades: advanced composites for retrofit. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. Proceedings of the 6th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VI 2012), Kingston, Ontario, Canada, 22-25 May 2011. Canadian Society for Civil Engineering (CSCE), pp. 101-108.

Heath, A. and Walker, P. J., 2013. Structural design for earth buildings. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation. Abingdon, U. K.: CRC Press, pp. 1901-1905.

Huang, P., Chang, W.-S., Shea, A., Ansell, M. P. and Lawrence, R. M. H., 2014. Non-homogeneous thermal properties of bamboo. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 657-664. (RILEM Bookseries; 9)

Ioannou, S., Paine, K. and Quillin, K., 2012. Resistance of supersulfated cement concrete to carbonation and sulfate attack. In: Patricios, N. and Alifragkis, S., eds. Construction. Athens, Greece: Athens Institute for Education and Research, pp. 293-305.

Lawrence, M., Heath, A. and Walker, P., 2009. Monitoring of the Moisture Content of Straw Bale Walls. In: Howlett, R. J., Lakhmi, C. J. and Shaun, H. L., eds. Sustainability in Energy and Buildings: Proceedings of the International Conference in Sustainability in Energy and Buildings (SEB'09).Vol. Part 3. Berlin Heidelberg: Springer, pp. 155-164.

Lawrence, R. M. H. and Walker, P., 2008. The impact of the water/lime ratio on the structural characteristics of air lime mortars. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom. London: Taylor & Francis, pp. 885-889.

Paine, K. A., 2008. Research towards sustainable concrete. In: Concrete and Steel Yearbook 2008-09. Cheshire, UK: Ten Alps Publishing, p. 9.

Paine, K. A., Dhir, R. K., Halliday, J. E., Zheng, L., Collery, D. J. and Rai, H. S., 2011. Use of recycled and secondary aggregates in concrete: engineering and environmental considerations. In: Newlands, M. D. and Dhir, R. K., eds. Concrete for High Performance Sustainable Infrastructure. Mumbai: Shroff Publishers and Distributors, pp. 77-86.

Roseley, A., Ansell, M.P., Smedley, D. and Porter, S., 2012. Creep of thixotropic adhesives in bonded-in timber connections as a function of temperature and humidity. In: World Conference on Timber Engineering 2012, WCTE 2012.Vol. 5. , pp. 377-378.

Thomson, A. and Walker, P. J., 2013. Condition monitoring and durability assessment of straw bale construction. In: Braganca, L., Pinheiro, M. and Mateus, R., eds. Portugal SB13: Contribution of Sustainable Building to Meet EU 20-20-20 Targets. , pp. 791-798.

Walker, P., Thomson, A. and Maskell, D., 2016. Straw bale construction. In: Harries, K. A. and Sharma, B., eds. Nonconventional and Vernacular Construction Materials. Woodhead Publishing Ltd., p. 127. (Woodhead Publish Series in Civil and StructuralEngineering; 58)

Watanabe, K., Fujii, Y. and Fodde, E., 2008. Conservation of the Buddhist Monastery of Ajina Tepa, Heritage of the Ancient Silk Road (in Japanese). In: Construction, Technology and Conservation of Historical Earthen Structure. , p. 7.

Ye, S. Y., Hsu, M. F., Chang, W. S. and Chen, J. L., 2011. Life cycle assessment of timber components in Taiwan traditional temples. In: Proceedings of the 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12.Vol. 14. Oxford: Elsevier, pp. 2683-2691. (Procedia Engineering)

Zheng, L., Paine, K. A. and Dhir, R. K., 2008. Effect of weather on early-age temperature rises in concrete. In: Dhir, R. K., Newlands, M. D., Dyer, T. D. and Tang, M. C., eds. Proceedings of the International Conference, Dundee, July 2008: Designing concrete for the visual environment.EP 89 ed. IHS BRE Press, pp. 33-44.

Articles

Ahmad, Z., Ansell, M. P., Smedley, D. and Tahir, P. M., 2012. Creep behavior of epoxy-based adhesive reinforced with nanoparticles for bonded-in timber connection. Journal of Materials in Civil Engineering, 24 (7), pp. 825-831.

Alam, P., Ansell, M. P. and Smedley, D., 2013. Adhesively bonded plate and rod reinforcements for timber flexural beams. International Wood Products Journal, 4 (1), pp. 52-61.

Alam, P., Ansell, M. and Smedley, D., 2012. Effects of reinforcement geometry on strength and stiffness in adhesively bonded steel-timber flexural beams. Intelligent Buildings International, 2 (3), pp. 231-244.

Ansell, M. P., 2013. Multi-functional nano-materials for timber in construction. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 248-256.

Barclay, K. and Heath, A., 2015. The costs of housing developments on sites with elevated landslide risk in the UK. IOP Conference Series: Earth and Environmental Science, 26 (1), 012037.

Bawcombe, J., Harris, R., Walker, P. and Ansell, M., 2015. The quality of Douglas-fir grown in the United Kingdom. Proceedings of the Institution of Civil Engineers: Construction Materials, 168 (3), pp. 99-109.

Bradley, A., Chang, W.-S. and Harris, R., 2015. The effect of drying on timber frame connections post flooding. Proceedings of the Institution of Civil Engineers: Construction Materials:, 168 (3), pp. 144-157.

Brandon, D., Maluk, C., Ansell, M. P., Harris, R., Walker, P., Bisby, L. and Bregulla, J., 2015. Fire performance of metal-free timber connections. Proceedings of Institution of Civil Engineers: Construction Materials, 168 (4), pp. 173-186.

Brennan, J., Pedreschi, R., Walker, P. and Ansell, M., 2013. The potential of advanced textiles for fabric formwork. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 229-237.

Briggs, K. M., Smethurst, J. A., Powrie, W., O'Brien, A. S. and Butcher, D. J. E., 2013. Managing the extent of tree removal from railway earthwork slopes. Ecological Engineering, 61 (C), pp. 690-696.

Briggs, K. M., Smethurst, J. A., Powrie, W. and O'Brien, A. S., 2013. Wet winter pore pressures in railway embankments. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 166 (5), pp. 451-465.

Chang, W.-S., Murakami, S., Komatsu, K., Araki, Y., Shrestha, K., Omori, T. and Kainuma, R., 2013. Technical note: Potential to use shape memory alloy in timber dowel-type connections. Wood and Fiber Science, 45 (3), pp. 330-334.

Chang, W.-S., 2015. Repair and reinforcement of timber columns and shear walls - A review. Construction and Building Materials, 97, pp. 14-24. Item availability may be restricted.

Chang, W.-S. and Araki, Y., 2016. Use of shape memory alloy in construction:a critical review. Proceedings of the ICE - Civil Engineering, 169 (2), pp. 87-95. Item availability may be restricted.

Chang, W.-S. and Betts, R., 2015. Forthcoming. Dowel-type connections with multiple densified bamboo nails. Journal of Materials in Civil Engineering

Chang, W.-S., Hsu, M.-F. and Komatsu, K., 2011. A new proposal to reinforce planked timber shear walls. Journal of Wood Science, 57 (6), pp. 493-500.

Chang, W.-S. and Nearchou, N., 2015. Hot-pressed dowels in bonded-in rod timber connections. Wood and Fiber Science, 47 (2), pp. 199-208.

Chang, W.-S., Thomson, A., Harris, R., Walker, P. and Shanks, J., 2011. Development of all-wood connections with plywood flitch plate and oak pegs. Advances in Structural Engineering, 14 (2), pp. 123-132.

Cheah, J. S. J., Walker, P., Heath, A. and Morgan, T. K. K. B., 2012. Evaluating shear test methods for stabilised rammed earth. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (6), pp. 325-334.

Chirivi, S., Ibell, T., Contento, A. and Di Egidio, A., 2016. Linear static behavior of curved beams coupled with strings representing also fiber-reinforced masonry arches. Advances in Structural Engineering, 19 (1), pp. 53-64.

Ciancio, D., Jacquin, P. and Walker, P., 2013. Advances on the assessment of soil suitability for rammed earth. Construction and Building Materials,, 42, pp. 40-47.

Collery, D. J., Paine, K. A. and Dhir, R. K., 2015. Establishing rational use of recycled aggregates in concrete:a performance-related approach. Magazine of Concrete Research, 67 (11), pp. 559-574.

D'Ayala, D. F. and Tsai, P. H., 2008. Seismic Vulnerability of Dieh-Dou Timber structures in Taiwan. Engineering Structures, 30 (8), pp. 2101-2113.

Darby, A. P. and Pellegrino, S., 1997. Inertial stick-slip actuator for active control of shape and vibration. Journal of Intelligent Material Systems and Structures, 8 (12), pp. 1001-1011.

Darby, A. P., Denton, S. R. and Ibell, T. J., 2009. Influence of changes in cross section on the effectiveness of externally bonded FRP strengthening. Journal of Composites for Construction, 13 (3), pp. 208-216.

Dawson, A.R., Dehdezi, P.K., Hall, M.R., Wang, J. and Isola, R., 2012. Enhancing thermal properties of asphalt materials for heat storage and transfer applications. Road Materials and Pavement Design, 13 (4), pp. 784-803.

Day, T., Pritchard, J. and Heath, A., 2010. Sowing the seeds of enhanced academic writing support in a research-intensive university. Educational Developments, 11 (3), pp. 18-21.

Dhir, R. K., Zheng, L. and Paine, K. A., 2008. Measurement of early-age temperature rises in concrete made with blended cements. Magazine of Concrete Research, 60 (2), pp. 109-118.

Dhir, R. K. and Paine, K. A., 2010. Value added sustainable use of recycled and secondary aggregates in concrete. Indian Concrete Journal, 84 (3), pp. 7-26.

Evernden, M., Darby, A. P. and Ibell, T. J., 2013. Engaging students with e-activities. The Structural Engineer, 91 (8), pp. 20-23.

Evernden, M. and Mottram, T., 2012. Double lap single and double bolt tension joints in PFRP leg angle connections. Submitted to: ICE Construction Materials

Evernden, M. and Mottram, T., 2012. A case for houses to be constructed of FRP components. ICE Construction Materials, 165 (CM1), 1000002.

Fasihnikoutalab, M., Asadi, A., Huat, B., Westgate, P., Ball, R. and Pourakbar, S., 2016. Laboratory-scale model of carbon dioxide deposition for soil stabilisation. Journal of Rock Mechanics and Geotechnical Engineering, 8 (2), pp. 1078-186.

Fasihnikoutalab, M., Westgate, P., Huat, B. B. K., Asadi, A., Ball, R., Nahazanan, H. and Singh, P., 2015. New Insights into Potential Capacity of Olivine in Ground Improvement. Electronic Journal of Geotechnical Engineering, 20 (8), pp. 2137-2148.

Fasihnikoutalab, M. H., Asadi, A., Huat, B. K., Ball, R. J., Pourakbar, S. and Singh, P., 2016. Utilisation of carbonating olivine for sustainable soil stabilisation. Environmental Geotechnics Item availability may be restricted.

Ferreira Pinto Da Silva, C., Rana, C., Maskell, D., Dengel, A., Ansell, P. and Ball, R. J., 2016. Influence of eco-materials on Indoor Air Quality. Green Materials, 4 (2). Item availability may be restricted.

Fodde, E., 2010. Conservation and conflict in the central Asian silk roads. Journal of Architectural Conservation, 16 (1), pp. 75-94.

Fodde, E., 2008. Fired brick conservation in the Kyrgyz Silk Roads:The case of Burana's Mausoleum 4. Journal of Architectural Conservation, 14 (1), pp. 77-94.

Fodde, E., 2008. The influence of soluble salts on the decay of Moenjodaro, Pakistan. Structural Survey, 26 (3), pp. 223-241.

Fodde, E., 2009. Traditional Earthen Building Techniques in Central Asia. International Journal of Architectural Heritage, 3 (2), pp. 145-168.

Fodde, E. and Khan, M. S., 2013. Affordable monsoon rain mitigation measures in the World Heritage site of Moenjodaro, Pakistan. International Journal of Architectural Heritage

Fodde, E., Watanabe, K. and Fujii, Y., 2013. Measuring evaporation distribution of mud brick and rammed earth. Structural Survey, 32 (1), pp. 32-48.

Forster, A. M., Fernie, S., Carter, K., Walker, P. and Thomson, D., 2015. Innovation in low carbon construction technologies:an historic analysis for obviating defects. Structural Survey, 33 (1), pp. 52-72.

Foster, R., Brindley, M., Lees, J., Ibell, T., Morley, C., Darby, A. and Evernden, M., 2016. Forthcoming. Experimental investigation of reinforced concrete T-beams strengthened in shear with externally bonded CFRP sheets. ASCE Journal of Composites for Construction

Garbett, J., Darby, A. P. and Ibell, T. J., 2010. Optimised beam design using innovative fabric-formed concrete. Advances in Structural Engineering, 13 (5), pp. 849-860.

Gates, P., 2010. A newcomer's perspective. Elevation: The Journal of the Society of Facade Engineering

Gates, P., Ibell, T., Darby, A., Evernden, M. and Kragh, M., 2012. Advanced composites for facade retrofit. The Structural Engineer, 90 (1), pp. 46-48.

Gatóo, A., Sharma, B., Bock, M., Mulligan, H. and Ramage, M. H., 2014. Sustainable structures:Bamboo standards and building codes. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 167 (5), pp. 189-196.

Glass, J., Dyer, T., Georgopoulos, C., Goodier, C., Paine, K., Parry, T., Baumann, H. and Gluch, P., 2013. Future use of life-cycle assessment in civil engineering. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 204-212.

Grammatikos, S. A., Zafari, B., Evernden, M. C., Mottram, J. T. and Mitchels, J. M., 2015. Moisture uptake characteristics of a pultruded fibre reinforced polymer flat sheet subjected to hot/wet aging. Polymer Degradation and Stability, 121, 407–419.

Grammatikos, S. A., Evernden, M., Mitchels, J., Zafari, B., Mottram, J. T. and Papanicolaou, G. C., 2016. On the response to hygrothermal aging of pultruded FRPs used in the civil engineering sector. Materials & Design, 96, pp. 283-295.

Grist, E., Paine, K., Heath, A., Norman, J. and Pinder, H., 2015. Structural and durability properties of hydraulic lime-pozzolan concretes. Cement & Concrete Composites, 62, pp. 212-223. Item availability may be restricted.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2013. Compressive strength development of binary and ternary lime-pozzolan mortars. Materials & Design, 52, pp. 514-523.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2015. The environmental credentials of hydraulic lime-pozzolan concretes. Journal of Cleaner Production, 93, pp. 26-37.

Gross, C. D. and Walker, P. J., 2014. Racking performance of timber studwork and hemp-lime walling. Construction and Building Materials,, 66 (15), pp. 429-435.

Gross, C., Walker, P. and Pritchett, I., 2013. Compression resistance of confined timber stud walls. Proceedings of the Institution of Civil Engineers: Construction Materials:, 166 (3), pp. 175-183.

Hadi, M., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Performance of shear wall composed of LVL and cement fiber board sheathing. Journal of Asian Architecture and Building Engineering, 9 (2), pp. 463-469.

Harries, K. A., Sharma, B. and Richard, M., 2012. Structural use of full culm bamboo:the path to standardization. International Journal of Architecture, Engineering and Construction, 1 (2), pp. 66-75.

Harris, R., 2014. Forthcoming. Innovative structural systems in timber. RFS Quarterly Journal of Forestry, 108 (4), pp. 40-45.

Harris, R., Chang, W.-S., Walker, P. and Shanks, J., 2014. Engineering Research into Traditional Timber Joints. CONTEXT - Journal of The Institute of Historic Building Conservation

Harris, R., Roberts, P. and Hargreaves, I., 2010. Aligned with nature. Civil Engineering, 80 (11), p. 82.

Heath, A., Paine, K., Goodhew, S., Ramage, M. and Lawrence, M., 2013. The potential for using geopolymer concrete in the UK. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 195-203.

Heath, A., Walker, P., Fourie, C. and Lawrence, M., 2009. Compressive strength of extruded unfired clay masonry units. Proceedings of the Institution of Civil Engineers: Construction Materials, 162 (3), pp. 105-112.

Heath, A., Walker, P., Jaquin, P. and Lawrence, M., 2012. Render induced cracking of earth masonry. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 165 (8), pp. 435-442.

Hirst, E. A. J., Walker, P., Paine, K. A. and Yates, T., 2012. Characteristics of low density hemp-lime building materials. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (1), pp. 15-23.

Ibell, T. J., Orr, J. J., Kostova, K., Darby, A. P. and Evernden, M., 2013. Extraordinary possibilities for future concrete structures. The IES Journal Part A: Civil & Structural Engineering, 6 (4), pp. 239-248.

Ibell, T. J. and Walker, P. J., 2013. Editorial. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 187-188.

Ibell, T., 2015. Creativity and fun: core strengths. The Structural Engineer, 93 (2), pp. 10-17.

Ibell, T., 2010. Learning structural engineering. The Structural Engineer, 88 (8), pp. 17-19.

Ibell, T., 2016. Virtual by design. The Structural Engineer, 94 (3), pp. 88-89.

Ioannou, S., Reig, L., Paine, K. and Quillin, K., 2014. Properties of a ternary calcium sulfoaluminate-calcium sulfate-fly ash cement. Cement and Concrete Research, 56, pp. 75-83.

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2013. Influence of loading-rate on the failure mode of reinforced concrete members. Proceedings of the ICE-Engineering and Computational Mechanics, 166 (4), pp. 194-203.

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2011. Plasticity-based approach for evaluating the blast response of RC columns retrofitted with FRP. International Journal of Protective Structures (IJPS), 2 (3), pp. 367-380.

Jung, K., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Improvement of glued-in-rod joint system using compressed wooden dowel. Holzforschung, 64 (6), pp. 799-804.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2010. Interpreting conservativeness in design criteria for flexural strengthening of concrete structures. International Journal of Concrete Structures and Materials, 4 (1), pp. 25-36.

Kansara, K., Ramanjaneyulu, K. and , S. E. R. C., C., 2008. Service-life-performance of RC bridges under environmental actions. Journal of the Institution of Engineers, 89 (November), pp. 55-62.

Kurchania, R., Sawant, S. S. and Ball, R., 2014. Synthesis and characterization of magnetite/polyvinyl alcohol core–shell composite nanoparticles. Journal of the American Ceramic Society, 97 (10), 3208–3215.

Lawrence, M., Mander, T., Norman, J. and Walkden, E., 2015. Design of the HIVE - An innovative research building for the University of Bath. The Structural Engineer, 93 (9), pp. 20-25.

Lawrence, M., Drinkwater, L., Heath, A. and Walker, P., 2009. Racking shear resistance of prefabricated straw-bale panels. Proceedings of the Institute of Civil Engineers: Construction Materials, 162 (3), pp. 133-138.

Lawrence, M., Shea, A., Walker, P. and De Wilde, P., 2013. Hygrothermal performance of bio-based insulation materials. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 257-263.

Lawrence, M., Fodde, E., Paine, K. and Walker, P., 2012. Hygrothermal performance of an experimental hemp-lime building. Key Engineering Materials, 517, pp. 413-421.

Lawrence, M., Heath, A. and Walker, P., 2009. Determining moisture levels in straw bale construction. Construction and Building Materials, 23 (8), pp. 2763-2768.

Lawrence, M., Heath, A. and Walker, P., 2013. Development of a novel mortar for use with unfired clay bricks. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (1), pp. 18-26.

Li, K. and Darby, A., 2010. An approach to the design of buffer for a buffered impact damper. Structural Control and Health Monitoring, 17 (1), pp. 68-82.

Liu, X., Smith, G. D., Jiang, Z., Bock, M. C. D., Boeck, F., Frith, O., Gatóo, A., Liu, K., Mulligan, H., Semple, K. E., Sharma, B. and Ramage, M., 2016. Nomenclature for engineered bamboo. BioResources, 11 (1), pp. 1141-1161.

Lombillo, I., Villegas, L., Fodde, E. and Thomas, C., 2014. In situ mechanical investigation of rammed earth:calibration of minor destructive testing. Construction and Building Materials, 51, pp. 451-460.

Loveridge, F., Spink, T., O'Brien, T., Briggs, K. and Butcher, D., 2010. The impact of climate and climate change on infrastructure slopes with particular reference to southern England. Quarterly Journal of Engineering Geology and Hydrogeology, 43 (4), pp. 461-472.

Mackenzie, C., Ormondroyd, G., Curling, S., Ball, R. J., Whiteley, N. and Malham, S., 2014. Ocean warming, more than acidification, reduces shell strength in a commercial shellfish species during food limitation. PLoS ONE, 9 (1), e86764.

Madhoushi, M., Chavooshi, A., Ashori, A., Ansell, M. P. and Shakeri, A., 2014. Properties of wood plastic composite panels made from waste sanding dusts and nanoclay. Journal of Composite Materials, 48 (14), pp. 1661-1669.

Maniatidis, V. and Walker, P., 2008. Structural capacity of rammed earth in compression. Journal of Materials in Civil Engineering, 20 (3), pp. 230-238.

Margalha, M. G., Silva, A. S., Do Rosário Veiga, M., De Brito, J., Ball, R. J. and Allen, G. C., 2013. Microstructural changes of lime putty during aging. Journal of Materials in Civil Engineering, 25 (10), pp. 1524-1532.

Maskell, D., Heath, A. and Walker, P. J., 2014. Geopolymer stabilisation of unfired earth masonry units. Key Engineering Materials, 600, pp. 175-185.

Maskell, D., Heath, A. and Walker, P. J., 2014. Inorganic Stabilisation Methods for Extruded Earth Masonry Units. Construction and Building Materials, 71, pp. 602-609.

Maskell, D., Walker, P. J., Thomson, A., Gross, C. D., Beadle, K. and Mander, T., 2014. Structural development and testing of a prototype house using timber and straw bales. ICE Proceedings Structures & Buildings, 168 (1), pp. 67-75.

Maskell, D., Heath, A. and Walker, P., 2015. Use of Metakaolin with stabilised extruded earth masonry units. Construction and Building Materials, 78 (1), p. 172.

Maskell, D., Heath, A. and Walker, P., 2015. Appropriate structural unfired earth masonry units. Proceedings of the Institution of Civil Engineers: Construction Materials

McCombie, P. and Dobie, M., 2015. Reinforced Soil Design using a two-part Wedge Mechanism: Justification and Evidence. GeoResources Journal, 2015 (4), pp. 17-22.

McCombie, P. F., 2009. Displacement based multiple wedge slope stability analysis. Computers and Geotechnics, 36 (1-2), pp. 332-341.

McGregor, F., Heath, A., Maskell, D., Fabbri, A. and Morel, J.-C., 2016. A review on the buffering capacity of earth building materials. Proceedings of the Institution of Civil Engineers: Construction Materials Item availability may be restricted.

Mitch, D., Harries, K. A. and Sharma, B., 2010. Characterization of splitting behavior of bamboo culms. Journal of Materials in Civil Engineering, 22 (11), pp. 1195-1199.

Mitch, D., Harries, K. A. and Sharma, B., 2011. Erratum for "Characterization of Splitting Behavior of Bamboo Culms" by Derek Mitch, Kent A. Harries, and Bhavna Sharma. Journal of Materials in Civil Engineering, 23 (3), p. 350.

Morgan, R. C. and Ball, R. J., 2013. Environmental (wet and dry) cycling of hydraulic lime mortars. Journal of the Building Limes Forum, 20, pp. 21-31.

Mundell, C., McCombie, P. F., Bailey, C., Heath, A. and Walker, P., 2009. Limit-equilibrium assessment of drystone retaining structures. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 162 (4), pp. 203-212.

Mundell, C., McCombie, P. F., Heath, A., Harkness, J. and Walker, P., 2010. Behaviour of drystone retaining structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 163 (1), pp. 3-12.

Murakami, S., Kitamori, A., Jung, K., Chang, W.-S. and Komatsu, K., 2012. Prediction of Reinforcement Effect by Screw on Triangular Embedment Perpendicular to the Grain with Variation of Screw Locations. Open Journal of Civil Engineering, 2 (1), pp. 167-173.

Nacif, G. L., Panzera, T. H., Strecker, K., Christoforo, A. L. and Paine, K., 2013. Investigations on cementitious composites based on rubber particle waste additions. Materials Research, 16 (2), pp. 259-268.

Newlands, M. D., Paine, K. A., Vemuri, N. A. and Dhir, R. K., 2008. A linear test method for determining early-age shrinkage of concrete. Magazine of Concrete Research, 60 (10), pp. 747-757.

Niyigena, C., Amziane, S., Chateauneuf, A., Arnaud, L., Bessette, L., Collet, F., Lanos, C., Escadeillas, G., Lawrence, M., Magniont, C., Marceau, S., Pavia, S., Peter, U., Picandet, V., Sonebi, M. and Walker, P., 2016. Variability of the mechanical properties of hemp concrete. Materials Today Communications, 7, pp. 122-133. Item availability may be restricted.

Nordby, A. S. and Shea, A. D., 2013. Building materials in the operational phase:Impacts of direct carbon exchanges and hygrothermal effects. Journal of Industrial Ecology, 17 (5), pp. 763-776.

Nuño, M., Ball, R. J., Bowen, C. R., Kurchania, R. and Sharma, G. D., 2015. Photocatalytic activity of electrophoretically deposited (EPD) TiO2 coatings. Journal of Materials Science, 50 (14), pp. 4822-4835. Item availability may be restricted.

Nuño, M., Pesce, G. L., Bowen, C. R., Xenophontos, P. and Ball, R. J., 2015. Environmental performance of nano-structured Ca(OH)2/TiO2 photocatalytic coatings for buildings. Building and Environment, 92, pp. 734-742. Item availability may be restricted.

Oehlers, D. J., Visintin, P., Chen, J. F. and Ibell, T. J., 2014. Simulating reinforced concrete members. Part 1: Partial interaction properties. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (11), pp. 646-653.

Oehlers, D. J., Visintin, P., Chen, J. F. and Ibell, T. J., 2014. Simulating reinforced concrete members. Part 2:Displacement-based analyses. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 167 (12), pp. 718-727.

Orr, J. J., 2014. Form:An adventure in concrete and brick. The Structural Engineer, 92 (4), pp. 12-20.

Orr, J. J., Darby, A. P., Ibell, T. J., Evernden, M. C. and Otlet, M., 2011. Concrete structures using fabric formwork. The Structural Engineer, 89 (8), pp. 20-26.

Orr, J. J., Darby, A. P., Ibell, T. J., Denton, S. R. and Shave, J. D., 2010. Shear design of circular concrete sections using the Eurocode 2 truss model. The Structural Engineer, 88 (23-24), pp. 26-33.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2013. Durability enhancements using fabric formwork. Magazine of Concrete Research, 65 (20), 1300120.

Orr, J., Darby, A., Ibell, T., Evernden, M. and Otlet, M., 2011. Concrete structures using fabric formwork. Atkins Technical Journal, 7 (1), 112.

Orr, J., Ibell, T., Evernden, M. and Darby, A., 2015. Day one sustainability. European Journal of Engineering Education, 40 (3), pp. 285-296.

Orr, J. J., Darby, A., Ibell, T. and Evernden, M., 2014. Design methods for flexibly formed concrete beams. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 167 (11), pp. 654-666.

Orr, J. J., Pask, D., Weise, K. and Otlet, M., 2015. Birmingham Gateway:structural assessment and strengthening. Structural Concrete, 16 (4), pp. 458-469. Item availability may be restricted.

Paine, K., 2015. Editorial. Proceedings of Institution of Civil Engineers: Construction Materials, 168 (1), pp. 1-2.

Paine, K. A. and Dhir, R. K., 2010. Recycled aggregates in concrete: a performance related approach. Magazine of Concrete Research, 62 (7), pp. 519-530.

Palumbo, M., McGregor, F., Heath, A. and Walker, P., 2016. Forthcoming. The influence of two crop by-products on the hygrothermal properties of earth plasters. Building and Environment, 105, pp. 245-252.

Panzera, T. H., Rubio, J. C., Bowen, C. R. and Walker, P. J., 2008. Microstructural design of materials for aerostatic bearings. Cement & Concrete Composites, 30 (7), pp. 649-660.

Perera, K., Ibell, T. and Darby, A., 2013. Bond characteristics of near surface mounted CFRP bars. Construction and Building Materials, 43, pp. 58-68.

Pesce, G. L., Morgan, D., Odgers, D., Henry, A., Allen, M. and Ball, R. J., 2013. Consolidation of weathered limestone using nanolime. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 213-228.

Price, N. and Heath, A., 2013. Quality control of earth construction in developing areas. Proceedings of the Institution of Civil Engineers: Construction Materials

Rajamma, R., Senff, L., Ribeiro, M. J., Labrincha, J. A., Ball, R., Allen, G. C. and Ferreira, V. M., 2015. Biomass fly ash effect on fresh and hardened state properties of cement based materials. Composites Part B - Engineering, 77, pp. 1-9.

Raw-Rees, S., Pesce, G. L. A., Ball, R. J. and Fodde, E., 2012. Characterization of binders in the historic lime mortars and plasters from 1A Royal Crescent, Bath. Journal of the Building Limes Forum, 19, pp. 28-37.

Reynolds, T., Harris, R. and Chang, W.-S., 2013. An analytical model for embedment stiffness of a dowel in timber under cyclic load. European Journal of Wood and Wood Products, 71 (5), pp. 609-622.

Reynolds, T., Harris, R., Chang, W.-S., Bregulla, J. and Bawcombe, J., 2015. Ambient vibration tests of a cross-laminated timber building. Proceedings of the Institution of Civil Engineers: Construction Materials:, 168 (3), pp. 121-131.

Santos, P. G. G. D., Martins, C. E. D. J., Skinner, J., Harris, R., Dias, A. M. P. G. and Godinho, L. M. C., 2015. Modal frequencies of a reinforced timber-concrete composite Floor:testing and modeling. Journal of Structural Engineering, 141 (11), 04015029.

Serrapede, M., Pesce, G. L., Ball, R. J. and Denuault, G., 2014. Nanostructured Pd hydride microelectrodes:In situ monitoring of pH variations in a porous medium. Analytical Chemistry, 86 (12), pp. 5758-5765.

Sharma, B., Mitch, D., Harries, K. A., Ghavami, K. and Kharel, G., 2011. Pushover behaviour of bamboo portal frame structure. International Wood Products Journal, 2 (1), pp. 20-28.

Sharma, B., Gatoo, A., Bock, M., Mulligan, H. and Ramage, M., 2015. Engineered bamboo:state of the art. Proceedings of Institution of Civil Engineers: Construction Materials, 168 (2), pp. 57-67.

Sharma, B., Gatóo, A., Bock, M. and Ramage, M., 2015. Engineered bamboo for structural applications. Construction and Building Materials, 81, pp. 66-73.

Sharma, B., Gatóo, A. and Ramage, M. H., 2015. Effect of processing methods on the mechanical properties of engineered bamboo. Construction and Building Materials, 83, pp. 95-101.

Sharma, B. and Harries, K. A., 2012. Effect of fiber gradation on the edge bearing strength of bamboo culms. Key Engineering Materials, 517, pp. 63-70.

Sharma, B., Harries, K. A. and Ghavami, K., 2013. Methods of determining transverse mechanical properties of full-culm bamboo. Construction and Building Materials, 38, pp. 627-637.

Sharma, G. D., Prakash Singh, S., Nagarjuna, P., Mikroyannidis, J. A., Ball, R. J. and Kurchania, R., 2013. Efficient dye-sensitized solar cells based on cosensitized metal free organic dyes with complementary absorption spectra. Journal of Renewable and Sustainable Energy, 5 (4), 043107.

Shea, A. D., Wall, K. and Walker, P., 2013. Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system. Building Services Engineering Research and Technology, 34 (4), pp. 369-380.

Shea, A., Lawrence, M. and Walker, P., 2012. Hygrothermal performance of an experimental hemp-lime building. Construction and Building Materials, 36, pp. 270-275.

Skinner, J., Bregulla, J., Harris, R., Paine, K. and Walker, P., 2014. Screw connectors for thin topping, timber-concrete composites. Materials and Structures, 47 (11), pp. 1891-1899.

Skinner, J., Harris, R., Paine, K., Walker, P. and Bregulla, J., 2013. Ultra-thin topping upgrades for improved serviceability performance. Advanced Materials Research, 778, pp. 673-681.

Skinner, J., Martins, C., Bregula, J., Harris, R., Paine, K. A., Walker, P. J. and Dias, A., 2014. Concrete upgrade to improve the vibration response of timber floors. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (SB9), 1300057.

Skinner, J., Salisbury, E. and Harris, R., 2016. GFRP connectors for thin topping timber-concrete composites. European Journal of Wood and Wood Products, 74 (3), pp. 477-479.

Smethurst, J., Briggs, K., Powrie, W., Ridley, A. and Butcher, D., 2015. Mechanical and hydrological impacts of tree removal on a clay fill railway embankment. Geotechnique, 65 (11), pp. 869-882. Item availability may be restricted.

Sullivan, P. and McCombie, P., 2013. Optimisation of tidal power arrays using a genetic algorithm. Proceedings of the Institution of Civil Engineers - Energy, 166 (1), pp. 19-28.

Tajaddini, A., Ibell, T., Darby, A., Evernden, M. and Silva, P., 2016. Quantifying moment redistribution in FRP-strengthened RC beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings Item availability may be restricted.

Talakokula, V., Bhalla, S., Ball, R. J., Bowen, C. R., Pesce, G. L., Kurchania, R., Bhattacharjee, B., Gupta, A. and Paine, K., 2016. Diagnosis of carbonation induced corrosion initiation and progression in reinforced concrete structures using piezo-impedance transducers. Sensors and Actuators A-Physical, 242, pp. 79-91. Item availability may be restricted.

Tayfur, Y., Darby, A., Ibell, T., Evernden, M. and Orr, J., 2016. Serviceability of fabric-formed concrete structures. International Journal of civil, environmental, structural, construction and architectural engineering, 10 (5), pp. 537-542.

Thomson, A. and Walker, P. J., 2014. Durability characteristics of straw bales in building envelopes. Construction and Building Materials, 68, pp. 135-141.

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Ansell, M., Wilen, C. E. and Toivakka, M., 2013. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of porous composites. Progress in Organic Coatings, 76 (1), pp. 101-106.

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Toivakka, M., Ansell, M.P. and Wilen, C.E., 2013. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of pigment coating. Progress in Organic Coatings, 76 (1), pp. 101-106.

Trujillo, D. J. A., Ramage, M. and Chang, W.-S., 2013. Lightly modified bamboo for structural applications. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 238-247.

Valerio, P., James, T., Darby, A.P. and Tedbury, G.E., 2014. Discussion. Proceedings of the Institution of Civil Engineers - Bridge Engineering, 167 (1), p. 75.

Valerio, P., Ibell, T. and Darby, A., 2009. Deep embedment of FRP for concrete shear strengthening. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 162 (5), pp. 311-321.

Walker, P., 2012. Editorial. Proceedings of Institution of Civil Engineers: Construction Materials, 165 (5), pp. 261-262.

Walker, P., 2015. Editorial. Proceedings of the Institution of Civil Engineers: Construction Materials, 168 (5), pp. 213-214.

Wall, K., Walker, P., Gross, C., White, C. and Mander, T., 2012. Development and testing of a prototype straw bale house. Proceedings of the Institution of Civil Engineers: Construction Materials, 165 (6), pp. 377-384.

Watanabe, K., Maung, M., Fujii, Y. and Fodde, E., 2008. Evaporation measurement for the preservation of the Buddhist Monastery of Ajina Tepa, Tajikistan. Annual Journal of Hydraulic Engineering, JSCE, 52, pp. 19-24.

Webber, A., Orr, J., Shepherd, P. and Crothers, K., 2015. The effective length of columns in multi-storey frames. Engineering Structures, 102, pp. 132-143.

Williams, J., Lawrence, M. and Walker, P., 2016. Forthcoming. A method for the assessment of the internal structure of bio-aggregate concretes. Construction and Building Materials, 116, pp. 45-51.

Yeo, S. Y., Hsu, M.-F., Komatsu, K., Chung, Y.-L. and Chang, W.-S., 2015. Shaking table test of the Taiwanese traditional Dieh-Dou timber frame. International Journal of Architectural Heritage

Zhou, Z., Walker, P. and D'Ayala, D., 2008. Strength characteristics of hydraulic lime mortared brickwork. Proceedings of Institution of Civil Engineers, Construction Materials, 161 (4), pp. 139-146.

Zografou, A., Heath, A. and Walker, P. J., 2014. China clay waste as aggregate in AA cement mortars. Proceedings of the Institution of Civil Engineers: Construction Materials

Reports/Papers

Walker, P. J., Harris, R. and Thomson, A., 2013. Contemporary non-metallic timber connections. Other. TRADA. (TRADA Research Summary)

Conference or Workshop Items

Abora, K., Paine, K., Quillin, K. and Dunster, A., 2012. Properties and performance of alkali activated fly ash and hydrated lime concrete. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11.

Abora, K., Quillin, K., Paine, K. A. and Dunster, A. M., 2009. Effect of mix design on consistence and setting time of alkali activated concrete. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Abson, N. I., Allen, G., Ball, R. J. and El-Turki, A., 2009. Linseed fibre lime composites, effect of fibre pre-treatment. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Amirjamshidi, G., Fodde, E., D'Ayala, D. and Mokhtari, E., 2012. The role of intangible assets in the conservation of Bam and its cultural landscape as a World Heritage site. In: 5th International Conference on Sustainable Tourism, ST 2012;A. Coruna;, 2012-06-12 - 2012-06-14.

Amirjamshidi, G., Fodde, E., Forsyth, M., Heath, A. and Mokhtari, E., 2012. Towards a methodology for the study of holistic approaches for the conservation of earthen architecture in seismic areas. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07.

Ansell, M.P., Muhammad Roseley, A. S. and Smedley, D., 2010. Stability of room temperature cure epoxy adhesives for timber structures under creep loading in tension and shear. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24. Engineered Wood Products Association, pp. 2900-2906.

Archila Santos, H., Pesce, G., Ansell, M. and Ball, R., 2015. Limeboo: Lime as a Replacement for Cement in Wall-Framing Systems with Bamboo-Guadua (Bahareque Encementado). In: 16th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 2015-08-10 - 2015-08-13.

Ball, R. J. and Allen, G. C., 2013. Hydraulic lime mortars: A study of mechanical properties. In: Barnett, S., ed. Cement and Concrete Science Conference 2013, 2013-09-02 - 2013-09-03. Portsmouth: University of Portsmouth.

Ball, R. J., El-Turki, A. and Allen, G., 2009. Influence of carbonation on the load dependent deformation of hydraulic lime mortars. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Bernal, S. A., Hussein, O. H., Mundra, S., Ball, R., Heath, A. and Provis, J. L., 2014. Alkali-activated binders based on biomass fly ash.

Bernal, S. A., Mundra, S., Hussein, O. H., Ball, R., Heath, A. and Provis, J. L., 2014. Biomass fly ash as precursor for alkali-activated materials.

Bradley, A., Chang, W.-S. and Harris, R., 2014. The effect of drying condition on post flooding mechanical properties of timber shear walls. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Brandon, D., Ansell, M., Bregulla, J., Harris, R. and Walker, P., 2014. Behaviour of non-metallic shear connections in fire. In: World Conference on Timber Engineering: Renaissance of Timber Construction, WCTE 2014, 2014-08-10 - 2014-08-14.

Brandon, D., Thomson, A., Ansell, M. P., Bregulla, J., Harris, R. and Walker, P. J., 2014. Stiffness modelling of non-metallic timber connections with pultruded dowels. In: InCIEC 2013 International Civil and Infrastructure Engineering Conference, 2013-09-22 - 2014-01-24.

Browning, G. G., Darby, A. P. and Walker, I., 2008. Human Perception of Vibrations due to Synchronised Crowd Loading. In: EURODYN 2008 - 7th European Conference on Structural Dynamics, 2008-07-07 - 2008-07-09.

Chang, W. S., Thomson, A., Walker, P. and Harris, R., 2009. Optimization of the all-wood pegged beam-to-beam timber connections. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Chang, W. S., 2009. Reinforcement of traditional timber shear walls. In: 1st International Symposium of Indonesian Wood Research Society., 2009-01-01.

Chang, W. S., Hsu, M. F. and Lo, M., 2008. Full-scale experiment on traditional timber frames of Taiwan. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05.

Chang, W.-S., Reynolds, T., Harris, R. and Mosalam, K., 2014. Using smartphone to identify dynamic characteristics of timber bridges. In: COST – Timber Bridges Conference 2014, 2014-09-25 - 2014-09-26.

Chang, W.-S., Wakita, T., Kitamori, A., Komatsu, K., Kataoka, Y. and Hsu, M.-F., 2012. Dynamic Properties of a Traditional Complex Bracket Sets in an Oriental Temple. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Chapman, J., Reynolds, T. and Harris, R., 2012. A 30 level cross laminated timber building system and analysis of the eurocode dynamic wind loads. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Collery, D., Bjerregaard, M. and Paine, K., 2012. The quality of collapse debris and possible reuse of this material to rebuild Port au Prince Haiti. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11.

Collery, D. J., McKenna, P., Dunne, D. and Paine, K. A., 2014. Strength and deformation characteristics of concrete containing recycled aggregate fines. In: Civil Engineering Research in Ireland (CERI 2014) conference, 2014-08-28 - 2014-08-29.

Coonan, R., Darby, A. and Ibell, T., 2009. Effectively confined area for FRP-confined RC columns under eccentric loading. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Darby, A., Coonan, R., Ibell, T. and Evernden, M., 2011. FRP confined square and rectangular columns under concentric and eccentric loading. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

De Caso y Basalo, F.J., Nanni, A. and Ibell, T., 2011. ICE methodology for FRP characterisation. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

El-Turki, A., Ball, R. J. and Allen, G. C., 2009. The effect of carbonation on the mechanical and microstructural properties of lime and cement mortars. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Evernden, M. and Mottram, T., 2009. A case for houses in the UK to be constructed of fibre reinforced polymer components. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT), 2009-09-06 - 2009-09-09.

Evernden, M. and Pelly, R., 2009. Single bolt tension joints in pultruded PFRP leg angle connections. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Evernden, M. and Smith, J., 2011. Concentric and eccentric compression tests on PFRP equal angles. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Ferreira Pinto Da Silva, C. F., Maskell, D., Ball, R. and Ansell, M., 2014. The physical, chemical and mechanical properties of eco-materials for passive indoor environmental control. In: Advanced Building Skins Conference Proceedings of the 9th ENERGY FORUM, 2014-10-28 - 2014-10-29.

Fodde, E., Watanabe, K. and Fujii, Y., 2009. Learning from vernacular wisdom: Mud brick construction in Tajikistan. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09.

Fodde, E., Fujii, Y. and Watanabe, K., 2011. 3D visualization of historic earthen structures for the documentation of deterioration processes and conservation work: the case of the ancient Buddhist monastery of Ajina Tepa, Tajikistan. In: Terrasia 2011, International Conference on Earthen Architecture in Asia, 2011-10-11 - 2011-10-14.

Fujii, Y., Watanabe, K. and Fodde, E., 2008. Construction of Topographic Maps Using Close-range Photogrammetry for the Preservation of the Buddhist Monastery of Ajina Tepa, Tajikistan. In: International Symposium on Conservation of Ancient Sites 2008, an ISRM-Sponsored Regional Symposium, 2008-09-21 - 2008-09-24.

Fujii, Y., Watanabe, K. and Fodde, E., 2008. Three-dimensional photogrammetric documentation of the Buddhist Monastery of Ajina Tepa, heritage of the Ancient Silk Roads. In: 43rd Japan National Conference on Geotechnical Engineering (JNCGE), 2008-01-01.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2009. Development of a robust mechanical shear connector between FRP and concrete for FRP stay-in-place participating formwork. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. Experimental investigation of a novel FRP-concrete composite floor slab. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. FRP concrete composite floor slabs. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Gai, X., Darby, A., Ibell, T., Evernden, M. and Matthews, S., 2009. FRP stay-in-place participating formwork: design considerations and preliminary testing. In: Advanced Composites in Construction 2009 (ACIC), 2009-09-01 - 2009-09-03.

Gai, X., Darby, A., Ibell, T., Evernden, M. and Orr, J., 2011. Permanent participating FRP formwork for concrete floor slabs. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10), 2011-04-02 - 2011-04-04.

Gates, P., Darby, A., Evernden, M. and Ibell, T., 2011. An FRP durability study: Mechanical testing of panels from the Second Severn Visitors Centre. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Gates, P., Ibell, T., Darby, A. and Evernden, M., 2013. Polymeric facades:fatigue performance of pultruded panel connections. In: Zingoni, A., ed. SEMC 2013: The Fifth International Conference on Structural Engineering, Mechanics and Computation, 2013-09-01 - 2013-09-03. Abingdon, U. K.: CRC Press, pp. 625-629.

Giampiccolo, A., Ball, R., Ansell, M. and Maskell, D., 2014. Synthesis of Co-doped TiO2 nanostructures for novel photo-catalytic coatings. In: ENERGY FORUM on Advanced Building Skins, 2014-10-28 - 2014-10-29, Forum Bressanone, Via Roma 9 in Bressanone.

Grammatikos, S., Ball, R. and Evernden, M., 2015. Structural deformation assessment of glass fibre reinforced polymers subjected to hygrothermal ageing. In: 18th International Conference on Composite Structures (ICCS18), 2015-06-15 - 2015-06-18.

Grammatikos, S., Ball, R. J. and Evernden, M., 2014. Environmental degradation assessment of pultruded FRP profiles. In: Duracosys 2014, 2013-09-15, Japan.

Grammatikos, S., Ball, R. J. and Evernden, M., 2014. On the environmental degradation assessment of pultruded fibre reinforced polymers. In: 22nd International Conference on Composites / Nano Engineering (ICCE-22), 2014-07-13, Malta.

Grammatikos, S. and Evernden, M., 2015. A ‘complete’ characterization study of anomalous behaviour of hygrothermally aged FRPs. In: 6th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2015), 2015-09-08 - 2015-09-11, Portugal.

Grammatikos, S. and Evernden, M., 2015. On the estimates of durability of glass fibre reinforced polymers subjected to hot /wet aging. In: 10th International Conference on Composite Science and Technology (ICCST/10), 2015-09-02 - 2015-09-04, Portugal.

Grammatikos, S., Evernden, M. and Ball, R., 2015. Combined characterization of the effects of hot/wet aging on a pultruded GFRP plate. In: 20th International Conference on Composite Materials (ICCM 20), 2015-07-19 - 2015-07-24, Denmark.

Grammatikos, S., Evernden, M. and Ball, R., 2015. Effects of hygrothermal aging on pultruded glass fibre reinforced polymers:a complimentary study. In: Advanced Composites in Construction (ACIC 2015), 2015-09-09 - 2015-09-11.

Grist, E., Paine, K., Heath, A. and Pinder, H., 2013. An Investigation into the Viability and Benefits of Modern Hydraulic Lime Concretes. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction, 2013-03-05 - 2013-03-08. New Delhi: Excel India Publishers, pp. 967-981.

Grist, E., Paine, K., Norman, J. and Heath, A., 2012. The feasibility and potential of modern hydraulic lime concretes. In: Concrete Structures for Sustainable Community, Fib Symposium, 2012-06-10 - 2012-06-14.

Gross, C., Harris, R., Walker, P. and Pritchett, I., 2012. Structural enhancement of timber stud framing using renewable insulation materials. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Experimentally observed behaviour of CFRP sheet strengthening across a shear plane. In: 11th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-11), 2013-06-26 - 2013-06-28.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Lifetime extension of reinforced concrete structures. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2014. Shear capacity of FRP-strengthened reinforced concrete T-beams. In: The 7th International Conference on FRP Composites in Civil Engineering – CICE 2014, 2014-08-20 - 2014-08-22.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12, Belfast.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12.

Grusova, M., Ibell, T. J., Darby, A. P., Evernden, M. and Orr, J. J., 2014. Mechanics of failure in FRP strengthened reinforced concrete in shear. In: The Fourth International fib Congress, 2014-02-10 - 2014-02-14.

Harris, R., 2014. Engineered timber structures in the UK. In: 3ème Forum International Bois Construction, 2013-04-25 - 2013-04-26, France.

Harris, R., Gusinde, B. and Roynon, J., 2012. Design and construction of the pods sports academy, Scunthorpe, England. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19.

Harris, R., 2009. Prescriptive rules for timber: right and wrong applications. In: IABSE British Group Henderson Colloqium, 2009-07-01.

Harris, R. and Chang, W.-S., 2014. Teaching timber engineering. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Harris, R., Gusinde, B. and Roynon, J., 2012. The Pods Sports Academy, Scunthorpe, England. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19.

Harris, R., Roberts, P. and Hargreaves, I., 2010. The John Hope Gateway Biodiversity Centre. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24.

Harris, R., Shanks, J., Hodson, T. and Borer, P., 2009. The Wales Institute for Sustainable Education (WISE): non-conventional materials in mainstream construction. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Heath, A., Lawrence, M., Walker, P. and Fourie, C., 2009. The compressive strength of modern earth masonry. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09.

Hennessy, R. and Harris, R., 2004. The Winter Gardens, Sheffield, UK. In: World Conference of Timber Engineering 2004, 2015-04-20.

Hirst, E., Brett, A., Thomson, A., Walker, P. and Harris, R., 2008. The structural performance of traditional oak tension and scarf joints. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05.

Hirst, E., Walker, P., Paine, K. and Yates, T., 2010. Characterisation of low density hemp-lime composite building materials under compression loading. In: Second International Conference on Sustainable Construction Materials and Technologies, 2010-06-28 - 2010-06-30.

Holley, J., 2009. Sol-gel surface treatment on Adobe brick. In: SIMS XVII - 17th International Conference on Secondary Ion Mass Spectrometry, 2009, 2009-09-14 - 2009-09-18.

Holley, J., Donadeli, E., Milhoranca, C. and Paine, K., 2015. Effect of nanolimestone particles on hydration and flexural strength of Portland limestone cement pastes. In: Concrete Research: Driving Profit and Sustainability, 2015-11-02 - 2015-11-05.

Huang, H., Xie, W. and Chang, W. S., 2015. Materials characterisation of NiTi and CuAIMn shape memory alloy bars under dynamic bending. In: International Conference on Shape Memory and Superelastic Technologies, SMST 2015, 2015-05-18 - 2015-05-22. Ohio, U. S. A.: ASM International, pp. 159-160.

Huang, P., Chang, W.-S., Ansell, M., Chew, J., Shea, A., Zeidler, A. and Pickering, S., 2014. Heat transfer simulation and experimental studies of bamboo in radial direction. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Hughes, D., Karim, M. R., Briggs, K., Glendinning, S., Toll, D., Dijkstra, T., Powrie, W. and Dixon, N., 2015. A comparison of numerical modelling techniques to predict the effect of climate on infrastructure slopes. In: Winter, M. G., Smith, D. M., Eldred, P. J. L. and Toll, D. G., eds. 16th European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2015, 2015-09-13 - 2015-09-17. ICE Publishing, pp. 3663-3668.

Ibell, T., 2015. Educating the next generation of structural engineers. In: ASCE/SEI Structures Congress, 2015-04-21 - 2015-04-25.

Ibell, T. and Darby, A., 2009. Fabric formwork for innovative concrete structures. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Ibell, T., Darby, A. and Denton, S. R., 2009. Plane section assumption for FRP-strengthened beams. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Ibell, T., Darby, A. and Denton, S., 2009. The goal for the FRP industry to be in Quadrant 1: ongoing research to assist in this quest. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Ibell, T., Darby, A., Orr, J. and Evernden, M., 2010. The role of structural fabrics in a sustainable concrete infrastructure. In: International Conference on Sustainable Built Environment (ICSBE-2010), 2010-12-13 - 2010-12-14.

Ioannou, S., Paine, K. and Quillin, K., 2011. Resistance of supersulfated cement concrete to carbonation and sulfate attack. In: 1st Annual International Conference on Construction, 2011-06-20 - 2011-06-23.

Ioannou, S., Paine, K. and Quillin, K., 2010. Strength and durability of calcium sulfoaluminate based concretes. In: International Conference on Non-Conventional Materials and Technologies: Ecological Materials and Technologies for Sustainable Building, 2010-09-21 - 2010-09-23.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Response of FRP wrapped RC columns to impact loads. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Plasticity based approach to analyse the response of FRP wrapped columns subjected to impact loads. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Jamshidi, A., Maropoulos, P., Ansell, M. and Cave, J., 2014. MANUFACTURING PROCESS CHALLENGES WHEN MACHINING SUPERALLOYS. In: Rehman, F., Woodfine, N. and Marasini, R., eds. 12th International Conference on Manufacturing Research (ICMR), 2014, 2014-09-09 - 2014-09-11, Southampton Solent University. Southampton, U. K.: Southampton Solent University, 139 - 144.

Jamshidi, A., Maropoulos, P., Ansell, M. and Cave, J., 2014. The effects of material variations in high value manufacturing industries. In: 2014 Knowledge Transfer Partnership (KTP) Associates Conference, 2014-06-27.

Kansara, K., Ibell, T. and Darby, A., 2009. Important issues towards the calibration of FRP-based flexural strengthening design criteria. In: 4th National Conference on Current trends in Technology (NUCONE – 2009), 2009-11-25 - 2009-11-27.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2010. Evaluation of FRP-based strengthening design criteria for concrete structures. In: 8th FIB International PhD Symposium in Civil Engineering, 2010-06-20 - 2010-06-23.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2011. Quantifying safety in structural strengthening design guidelines. In: 2011 fib Symposium: Concrete Engineering for Excellence and Efficiency, 2011-06-08 - 2011-06-10.

Kansara, K., Ibell, T., Darby, A., Evernden, M. and Teng, J.-G., 2011. Conservativeness in FRP-based structural strengthening design process. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Kansara, K., Karusala, R. and , S. E. R. C. (C.), C., 2008. Durability Perspective for Concrete Structures in Codes of Practice. In: 3rd National Conference on Current Trends in Technology, NUCONE2008, 2008-11-01.

Kansara, K., Karusala, R. and , S. E. R. C. (C.), C., 2008. Probabilistic Limit-State of Depassivation for the Deteriorating Concrete Structures under Environmental Actions. In: 3rd National Conference on Current Trends in Technology, NUCONE2008, 2008-11-01.

Kostova, K. Z., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Behaviour of fabric-formed concrete beams reinforced with FRP bars. In: Advanced Composites in Construction (ACIC 2013), 2013-09-10 - 2013-09-12.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Advanced composite reinforcement for fabric-formed structural elements. In: Orr, J., Evernden, M., Darby, A. and Ibell, T., eds. Second International Conference on Flexible Formwork (icff2012), 2012-06-27 - 2012-06-29. Bath: The BRE Centre for Innovative Construction Materials, pp. 200-210.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Innovative structural systems for architecturally expressive and sustainable concrete structures. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. 6th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VI), 2012-05-22 - 2012-05-25. Montreal, QC: Canadian Society for Civil Engineering (CSCE), pp. 109-116.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Novel splayed anchorage system for internally reinforced concrete members. In: 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS-11), 2013-06-26 - 2013-06-28.

Lark, R., Al-Tabbaa, A. and Paine, K. A., 2013. Biomimetic multi-scale damage immunity for construction materials: M4L project overview. In: ICSHM 2013: Proceedings of the 4th International Conference on Self-Healing Materials, 2013-06-16 - 2013-06-20. Ghent: Delft University of Technology, pp. 400-404.

Latif, E., Lawrence, M., Shea, A. and Walker, P., 2015. Moisture Buffer Potential of Wall Assemblies Incorporating Hemp-Lime. In: First International Conference on Bio-based Building Materials, 2015-06-22 - 2015-06-24, France.

Lawrence, M., Heath, A. and Walker, P., 2008. Modern innovations with unfired clay masonry. In: Proceedings of 8th International Seminar on Structural Masonry (ISSM 08), 2008-11-05 - 2008-11-08.

Lawrence, M. and Walker, P., 2008. The Measurement of the Carbonation Profile in Lime Mortars using a Drilling Resistance Measurement System. In: Proceedings of the 11th International Congress on Deterioration and Conservation of Stone, 2008-09-15 - 2008-09-20.

Lawrence, M., 2014. The use of bio-based materials to reduce the environmental impact of construction. In: International Congress on Materials and Structural Stability, 2013-11-27 - 2013-11-30.

Lawrence, M., Duffy, E. and Walker, P., 2014. Hemp-Lime3:Highlighting room for improvement. In: International Congress on Materials and Structural Stability, 2013-11-27 - 2013-11-30.

Lawrence, M., Scannell, S. and Walker, P., 2014. A critical review of the effect of calcitic aggregate on air-lime mortar. In: International Congress on Materials and Structural Stability, 2013-11-27 - 2013-11-30.

Lawrence, M., Scannell, S. and Walker, P., 2014. A study of the impacts of calcitic aggregates on the properties of air-lime mortar. In: 9th International Masonry Conference 2014 in Guimares, 2014-07-07 - 2014-07-09.

Lawrence, M., Heath, A. and Walker, P., 2009. The impact of external finishes on the weather resistance of straw bale walls. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09.

Maskell, D., Heath, A. and Walker, P. J., 2013. Suitable stabilisation methods for extruded earth masonry. In: Central Europe towards Sustainable Building 2013 (CESB 13), 2013-06-26 - 2013-06-28.

Maskell, D., Heath, A. and Walker, P., 2012. Durable Structural Extruded Earth Masonry Units. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07.

Maskell, D., Reddy, V., Heath, A. and Walker, P., 2016. Modern earth construction techniques – an overview. In: 16th International Brick and Block Masonry Conference, 2016, 2016-06-26 - 2016-06-30.

Maskell, D., Thomson, A., Lawrence, R., Shea, A. and Walker, P., 2015. The impact of bio-aggregate addition on the hygrothermal properties of lime plasters. In: 15th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 2015-08-10 - 2015-08-13, Univeristy of Manitoba.

McCombie, P., 2009. Critical failure Surface Location using Simple Genetic Algorithm and Multiple Wedge Slope Stability. In: First International Symposium on Computational Geomechanics, 2009-04-29 - 2009-05-01.

McCombie, P. and Dobie, M., 2015. Reinforced soil design using a two-part wedge mechanism:justification and evidence. In: XVI European Conference on Soil Mechanics and Geotechnical Engineering, 2015-09-13 - 2015-09-17.

McCombie, P. and Dobie, M., 2015. Serviceability limit state check in reinforced soil design. In: Winter, M. G., Smith, D. M., Eldred, P. J. L. and Toll, D. G., eds. XVI European Conference on Soil Mechanics and Geotechnical Engineering, 2015-09-13 - 2015-09-17. ICE Publishing, pp. 1415-1420.

Mcgregor, F., Heath, A., Ayre, G., Fodde, E. and Walker, P., 2012. The effect of stabilisation on humidity buffering of earth walls. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07.

Mokhtari Taleghani, E., Vatandoust, R. and Amirjamshidi, G., 2012. From threat to opportunity: The case of Bam. In: XIth International Conference on the Study and Conservation of Earthen Architectural Heritage, Terra, 2012-04-01.

Molesworth, I., Walker, P. and Fodde, E., 2012. Structural evaluation of a novel solution for sustainable masonry construction. In: 15th International Brick and Block Masonry Conference, 2012-06-03 - 2012-06-06.

Muddle, D., Briggs, K., Dashwood, C. and Dijkstra, T., 2015. The influence of slope geology on landslide occurrence during extreme rainfall. In: XVI European Conference on Soil Mechanics and Geotechnical Engineering, 2015, 2015-09-13 - 2015-09-17, Edinburgh.

Mundell, C., McCombie, P., Heath, A. and Walker, P., 2009. Drystone retaining walls: From full-scale testing to construction requirements. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09.

Mundell, C., Mccombie, P., Heath, A., Harkness, J. and Walker, P., 2008. Large Scale Testing of Drystone Retaining Walls. In: D'Ayala, D. F. and Fodde, E., eds. VI International Conference on Structural Analysis of Historic Construction (SAHC08), 2008-07-02 - 2008-07-04.

Mustard, G., Ball, R. and Wang, W., 2015. Characterisation of three UK municipal solid waste incineration ashes for use as secondary construction materials. In: 35th Cement and Concrete Science Conference (CCSC35), 2015-08-26 - 2015-08-28, Scotland.

Naicu, D., Harris, R. and Williams, C., 2014. Timber Gridshells:Design methods and their application to a temporary pavilion. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Orr, J. J., Darby, A. P., Ibell, T. J. and Evernden, M., 2014. Performance based design of low-carbon concrete structures. In: The Fourth International fib Congress, 2014-02-10 - 2014-02-14.

Orr, J., Darby, A., Ibell, T., Evernden, M., Lava, P. and Debruyne, D., 2013. The shear behaviour of non-prismatic reinforced concrete beams determined using digital image correlation. In: 5th International Conference on Optical Measurement Techniques for Structures and Systems 2012., 2012-04-03 - 2012-04-04.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2012. Durability enhancements using fabric formwork. In: Fédération Internationale du Béton Symposium: Concrete Structures for Sustainable Community, 2012-06-11 - 2012-06-14.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2012. Fabric formwork for ultra high performance fibre reinforced concrete structures. In: Fédération Internationale du Béton Symposium: Concrete Structures for Sustainable Community, 2012-06-11 - 2012-06-14.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2011. Fibre reinforced polymer grids as shear reinforcement in fabric formed concrete beams. In: Advanced Composites in Construction 2011 (ACIC 2011), 2011-09-06 - 2011-09-08.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2011. Innovative reinforcement for fabric formed concrete structures. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10), 2011-04-02 - 2011-04-04.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2012. Optimisation and durability in fabric cast 'Double T' beams. In: Second International Conference on Flexible Formwork (icff2012), 2012-06-27 - 2012-06-29.

Orr, J., Ibell, T., Darby, A. and Evernden, M., 2013. Extraordinary possibilities using fabric to form concrete structures. In: Zingoni, A., ed. SEMC 2013: The Fifth International Conference on Structural Engineering, Mechanics and Computation, 2013-09-01 - 2013-09-03. Abingdon, U. K.: Taylor & Francis, pp. 813-818.

Orr, J., Ibell, T. and Darby, A., 2010. Innovative concrete structures using fabric formwork. In: Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010), 2010-09-06 - 2010-09-08.

Paine, K., Ioannou, S., Abora, K. and Quillin, K., 2013. Low Carbon Concrete: Research with Non-Portland Cements. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction, 2013-03-05 - 2013-03-08. New Delhi: Excel India Publishers, pp. 749-762.

Paine, K., Lark, R. and Al-Tabbaa, A., 2015. Biomimetic multi-scale damage immunity for concrete. In: Concrete Research: Driving Profit and Sustainability, 2015-11-02 - 2015-11-05.

Paine, K. A., Collery, D. J. and Dhir, R. K., 2009. Strength and deformation characteristics of concrete containing coarse recycled and manufactured aggregates. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Panzera, T. H., Strecker, K., Assis, M. A. O., Paine, K. A. and Walker, P., 2009. Recycling of rubber waste into cementitious composites. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Papatzani, S., Giannakis, I., Paine, K. and Kotsovos, M., 2015. RC structural walls under cyclic loading - Experimental verification of code overestimation of transverse reinforcement reduction potentials. In: Concrete Research: Driving Profit and Sustainability, 2015-11-02 - 2015-11-05.

Papatzani, S. and Paine, K., 2015. Overview of construction and demolition waste legislation in EU and Greece & state of the art on recycling CDEW in concrete. In: Fifth International Conference on Environmental Management, Engineering, Planning and Economics (CEMEPE) and SECOTOX Conference, 2015-06-14 - 2015-07-18.

Perera, K., Ibell, T. and Darby, A., 2009. Bond behaviour of various shapes of NSM CFRP bars and concrete. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Perera, K., Ibell, T., Darby, A. and Denton, S., 2009. Bond mechanisms of various shapes of NSM CFRP bars. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Russell, M., ed. 32nd Cement & Concrete Science Conference, 2012-09-16 - 2012-09-17.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Ferreira, V. M., Dias, A. B., Afonso, A. S. and de Brito, J., eds. Congress of Innovation on Sustainable Construction (CINCOS'12), 2012-09-19 - 2012-09-21.

Pesce, G. and Ball, R., 2015. Radiocarbon dating of lime mortars. In: 2015 Conference and Gathering of the Building Limes Forum, 2015-09-18 - 2015-09-19, Clare College.

Pesce, G., Ball, R., Grant, R., Yeandel, S. and Parker, S., 2015. Atomistic modelling for the construction industry. In: 35th Cement and Concrete Science Conference (CCSC35), 2015-08-26 - 2015-08-28, Scotland.

Pesce, G., Ball, R., Grant, R., Yeandel, S., Parker, S. and Molinari, M., 2015. Experimental Investigation for the Development and Validation of Atomistic Models in Construction. In: 16th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 2015-08-10 - 2015-08-13.

Pesce, G., Ball, R., Serrapede, M. and Denuault, G., 2014. In situ monitoring of pH changes in concrete and lime mortars. In: 34th Cement and Concrete Science Conference, 2014-09-14 - 2014-10-17, University of Sheffield.

Ramsden, J., Keeling, T., Shepherd, P., Shea, A. and Sharma, S., 2015. SmartBuildingAnalyser:A parametric early-stage analysis tool for multi-objective building design. In: CIBSE Technical Symposium, 2015-04-16 - 2015-04-17, UK.

Reynolds, T., Bolmsvik, Å., Vessby, J., Chang, W.-S., Bawcombe, J. and Bregulla, J., 2014. Ambient vibration testing and modal analysis of multi-storey cross laminated timber buildings. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14, Quebec City.

Reynolds, T., Chang, W. and Harris, R., 2011. Wind-induced vibration of tall timber buildings. In: 2011 IASS Annual Symposium: IABSE-IASS 2011: Taller, Longer, Lighter, 2011-09-20 - 2011-09-23.

Reynolds, T., Chang, W.-S. and Harris, R., 2013. In-service dynamic stiffness of dowel-type connections. In: 46th Meeting of CIB W18 on Timber Structures, 2013-08-19 - 2013-10-24.

Reynolds, T., Harris, R. and Chang, W.-S., 2012. Dynamic behaviour of timber perpendicular to the grain in dowel-type connections. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Shakil, M., Holley, J., Paine, K. and Ansell, M., 2015. Sol-Gel Technology as a Seeding Agent for Portland Cement Systems:Compatibility Studies. In: XVIII International Sol-Gel (Conference 2015), 2015-09-06 - 2015-09-11.

Shanks, J., Walker, P. and Harris, R., 2008. Development of rational guidelines for traditional joints in oak frame. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05.

Sharma, B., Gatóo, A. and Ramage, M., 2015. Natural fibre composites:Engineered bamboo for construction. In: 7th Biennial Conference on Advanced Composites In Construction, ACIC 2015, 2015-09-09 - 2015-09-11. NetComposites Limited, pp. 41-46.

Sharma, T., Alazhari, M., Cooper, R., Heath, A. and Paine, K., 2015. The requirements for autonomic microbiologically-induced calcite-precipitation in concrete. In: Fifth International Conference on Self-Healing Materials, 2015-06-22 - 2015-06-24, North Carolina.

Shave, J., Bennetts, J., Orr, J. J. and Darby, A. P., 2013. Shear strengthening of rectangular and circular concrete members using FRP. In: Advanced Composites in Construction (ACIC 2013), 2013-09-10 - 2013-09-12.

Skinner, J., Harris, R., Paine, K., Walker, P. and Bregula, J., 2012. The Characterisation of Connectors for the Upgrade of Timber Floors with Thin Structural Toppings. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19.

Smedley, D., Tiew, J., Roseley, A., Ahmad, Z. and Ansell, M.P., 2012. Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Spadea, S., Orr, J. and Yang, Y., 2015. Bespoke Reinforcement for Optimised Concrete Structures. In: IASS Annual Symposium: Future Visions - IASS/ISOFF 2015, 2015-08-16 - 2015-08-20.

Tajaddini, A., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. A parametric study on moment redistribution in FRP-strengthened continuous RC beams. In: 11th international symposium on fiber reinforced polymer for reinforced concrete structures (FRPRCS-11) 2013, conference proceedings, 2013-06-26 - 2013-06-28, Uni of Minho.

Tajaddini, A., Ibell, T., Darby, A. and Evernden, M., 2013. Moment redistribution in "anchored" FRP-strengthened continuous RC beams:a theorectical study. In: 6th International Conference on Advanced Composites in Construction, ACIC 2013, 2013-09-10 - 2013-09-12, Queen's University.

Tajaddini, A., Ibell, T., Darby, A. and Evernden, M., 2015. Moment redistribution in CFRP strengthened concrete t-beams: an experimental study. In: The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015); joint conference; December 14-16, 2015;, 2015-12-14 - 2015-12-16, China.

Thomson, A., Harris, R., Ansell, M. and Walker, P., 2010. Development of non-metallic timber connections for contemporary applications. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24.

Thomson, A., Harris, R., Walker, P., Ansell, M. and Chang, W. S., 2009. Contemporary metal free dowel connections for timber structures. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Thomson, A., Maskell, D., Walker, P., Lemke, M., Shea, A. and Lawrence, R., 2015. Improving hygrothermal properties of clay. In: 15th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 2015-08-10 - 2015-08-13, Univeristy of Manitoba.

Thomson, A., Pope, D. and Walker, P., 2008. Erosion characteristics of rammed earth. In: Kerpic'08: international conference: Learning from earthen architecture in climate change, 2008-09-04 - 2008-09-05.

Tyas-Susanti, B., Fodde, E. and D'Ayala, D., 2011. The role of community participation:learning from the Chinese heritage of Java, Indonesia. In: ICOMOS International Conference 2011: Asian Urban Heritage, 2011-10-15 - 2011-10-17.

Vemuri, N. A., Newlands, M. D., Paine, K. A. and Dhir, R. K., 2009. Early-Age Shrinkage of CEM I and Fly Ash Combinations Using a New Linear Test Method. In: 2nd International RILEM Workshop on Concrete Durability and Service Life Planning (ConcreteLife’09), 2009-09-07 - 2009-09-09.

Walker, P. J. and Thomson, A., 2013. Development of prefabricated construction products to increase use of natural materials. In: Central Europe towards Sustainable Building 2013 (CESB 13), 2013-06-26 - 2013-06-28.

Walker, P., 2008. Growing your own building: Developments in straw and hemp construction. In: Proceedings of the 10th International Conference on Non-Conventional Materials and Technologies (NOCMAT), 2008-11-01.

Walker, P., Heath, A. and Lawrence, R. M. H., 2008. Modern innovations in unfired clay masonry in the UK. In: Proceedings of the 10th International Conference on the Study and Conservation of Earthen Architectural Heritage, 2008-02-01 - 2008-02-05.

Wang, J., Heath, A. and Walker, P. J., 2014. Numerical analysis of triplet shear test on brickwork masonry. In: Al-Bahar, S. K. and Zhao, J. Y., eds. 2013 3rd International Conference on Civil Engineering and Building Materials, CEBM 2013, 2013-12-07 - 2013-12-08, Hong Kong. Trans Tech Publications, pp. 437-441. (Advanced Materials Research; 831)

Warren, L., Briggs, K. and McCombie, P., 2015. Advances in the assessment of drystone retaining walls - some case studies. In: XVI European Conference on Soil Mechanics and Geotechnical Engineering, 2015-09-13 - 2015-09-17. London, U. K.: ICE Publishing, pp. 3583-3588.

Yang, Y., Orr, J., Ibell, T. and Darby, A., 2015. Shear strength theories for beams of variable depth. In: IASS2015 Annual International Symposium on Future Visions IASS/ISOFF, 2015-08-16 - 2015-08-20.

Yeo, S. Y., Hsu, M. F., Komatsu, K. and Chang, W. S., 2013. Dynamic characteristics of Taiwanese traditional Dieh-Dou timber structures. In: STREMAH 2013, 2013-06-25 - 2013-06-27.

Yeo, S. Y., Chang, W.-S., Hsu, M.-F. and Komatsu, K., 2011. The structural behaviour of timber frame under various roof weights – using Taiwanese traditional Die-Dou timber frame as case study. In: East Asian Architectural Culture International Conference (EAAC 2011), 2011-05-12 - 2011-05-14.

Yeo, S. Y., Hsu, M.-F., Komatsu, K., Chung, Y.-L. and Chang, W.-S., 2014. Benaviour of Taiwanese Traditional Dieh-Dou Timber Frame. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Yeo, S. Y., Komatsu, K., Hsu, M.-F., Chang, W.-S., Wakita, T. and Kataoka, Y., 2013. A Preliminary Study on the Structural Stiffness of Taiwanese Traditional Dieh-Dou Asymmetric Timber Frame. In: The 63th Annual meeting of the JWRS, 2013-03-27 - 2013-03-29.

Zhang, H., Watanabe, K., Fuji, Y. and Fodde, E., 2009. Earthen Structures Documentation in Ajina Tepa, Tajisistan: The Use of 3D Photogrammetry. In: International Symposium on Engineering,Energy and Environment (ISEEE 2009), 2009-11-26.

Zhou, Z., Walker, P. and D'Ayala, D., 2008. Flexural bond strength development of brickwork using natural hydraulic lime (NHL) mortar. In: 14th International Brick & Block Masonry Conference, 2008-02-17 - 2008-02-20.

Zhou, Z., Walker, P. and D'Ayala, D., 2008. Influence of materials on mortar and bond strength of hydraulic lime mortared brickwork. In: Proceedings of the 8th International Seminar on Structural Masonary (ISSM08), 2008-11-05 - 2008-11-08.

de Caso y Bassalo, F., Nanni, T. and Ibell, T., 2011. Investigation of circumferential strain experimental methodology for FRP characterisation. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Thesis

Orr, J., 2012. Flexible formwork for concrete structures. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Orr, J., 2009. Shear capacity of circular concrete sections. Thesis (Masters). University of Bath.

Non-academic press

Other

This list was generated on Tue Jun 28 07:50:02 2016 IST.