Items from Research Centres & Institutes > Materials Research Centre

2013

Almond, D. P., Budd, C. J., Freitag, M. A., Hunt, G. W., McCullen, N. J. and Smith, N. D., 2013. The origin of power-law emergent scaling in large binary networks. Physica A: Statistical Mechanics and its Applications, 392 (4), pp. 1004-1027.

Benzeval, I., Bowen, C. R., Guy, R. H. and Delgado-Charro, M. B., 2013. Effects of iontophoresis, hydration, and permeation enhancers on human nail plate: Infrared and impedance spectroscopy assessment. Pharmaceutical Research, 30 (6), pp. 1652-1662.

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2013. A comparison between optimized active thermography and digital shearography for detection of damage in aerospace composite structures. In: Buyukozturk, O., Tasdemir, M. A., Gunes, O. and Akkaya, Y., eds. Nondestructive Testing of Materials and Structures. Dordrecht: Springer, pp. 641-647. (RILEM Bookseries; 6)

Sangiah, D., Plummer, A. R., Bowen, C. and Guerrier, P., 2013. A novel piezohydraulic aerospace servovalve. Part I: design and modelling. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (4), pp. 371-389.

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Toivakka, M., Ansell, M.P. and Wilen, C.E., 2013. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of pigment coating. Progress in Organic Coatings, 76 (1), pp. 101-106.

2012

Ahmad, Z., Ansell, M., Smedley, D. and Tahir, P. M., 2012. Creep behavior of epoxy-based adhesive reinforced with nanoparticles for bonded-in timber connection. Journal of Materials in Civil Engineering, 24 (7), pp. 825-831.

Alam, P., Ansell, M. P. and Smedley, D., 2012. Forthcoming. Adhesively bonded plate and rod reinforcements for timber flexural beams. International Wood Products Journal

Alam, P., Ansell, M. and Smedley, D., 2012. Effects of reinforcement geometry on strength and stiffness in adhesively bonded steel-timber flexural beams. Intelligent Buildings International, 2 (3), pp. 231-244.

Almond, D., 2012. Induction Thermography for Inspection through Coatings. University of Bath.

Almond, D. P. and Pickering, S. G., 2012. An analytical study of the pulsed thermography defect detection limit. Journal of Applied Physics, 111 (9), 093510.

Amura, M. and Meo, M., 2012. Prediction of residual fatigue life using nonlinear ultrasound. Smart Materials and Structures, 21 (4), 045001.

Ball, R., Pesce, G. and Bowen, C., 2012. Characterisation of lime/metakaolin paste using impedance spectroscopy. Key Engineering Materials, 517, pp. 487-494.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Tissue and Cell Engineering Society annual conference, 2012-07-04 - 2012-07-06, Liverpool.

Ciampa, F., Meo, M. and Barbieri, E., 2012. Impact localization in composite structures of arbitrary cross section. Structural Health Monitoring - An International Journal, 11 (6), pp. 643-655.

Ciampa, F. and Meo, M., 2012. Nonlinear elastic imaging using reciprocal time reversal and third order symmetry analysis. Journal of the Acoustical Society of America, 131 (6), pp. 4316-4323.

Cota, F. D. P., Panzera, T. H., Schiavon, M. A., Christoforo, A. L., Borges, P. H. R., Bowen, C. and Scarpa, F., 2012. Full factorial design analysis of carbon nanotube polymer-cement composites. Advanced Materials Research, 15 (4), pp. 573-580.

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2012. A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization. NDT & E International, 45 (1), pp. 91-96.

Graham, Tony, 2012. Biocompatible electrode. US2012091011 (A1), 19 April 2012.

Guida, M., Marulo, F., Meo, M. and Russo, S., 2012. Experimental tests analysis of fiber metal laminate under birdstrike. Mechanics of Advanced Materials and Structures, 19 (5), pp. 376-395.

Meo, M., 2012. Nanoreinforced Solid Fibre Laminates (NSFL) for improved impact resistant properties. University of Bath.

Packham, D. E., 2012. A crisis in the environment? The impact of polymers and adhesives. In: POLYCHAR 20, World Forum on Advanced Materials, 2012-03-26 - 2012-03-30, Dubrovnik.

Panzera, T. H., Christoforo, A. L., Campos Rubio, J. C., Bowen, C. R., Borges, P. H. R. and Silva, L. J., 2012. Forthcoming. Evaluation of compacted cementitious composites for porous bearings. International Journal of Applied Ceramic Technology

Pesce, G. L. A., Ball, R. J., Quarta, G. and Calcagnile, L., 2012. Identification, extraction, and preparation of reliable lime samples for 14C dating of plasters and mortars with the “pure lime lumps” technique. Radiocarbon, 54 (3-4), pp. 933-942.

Pinto, F., Ciampa, F., Meo, M. and Polimeno, U., 2012. Multifunctional SMArt composite material for in situ NDT/SHM and de-icing. Smart Materials and Structures, 21 (10), 105010.

Pinto, F., White, A. and Meo, M., 2012. Forthcoming. Characterisation of ductile prepregs. Applied Composite Materials

Prajer, M. and Ansell, M., 2012. Observation of transcrystalline growth of PLA crystals on sisal fibre bundles and the effect of crystal structure on interfacial shear strength. Composite Interfaces, 19 (1), pp. 39-50.

Ptaszek, G., Cawley, P., Almond, D. and Pickering, S., 2012. Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems. NDT & E International, 45 (1), pp. 71-78.

Regonini, D., Adamaki, V., Bowen, C.R., Dent, A.C.E., Pennock, S.R. and Taylor, J., 2012. AC electrical properties of TiO2 and Magnéli phases, TinO2n−1. Solid State Ionics, 229, pp. 38-44.

Regonini, D., Satka, A., Jaroenworaluck, A., Allsopp, D. W. E., Bowen, C. R. and Stevens, R., 2012. Factors influencing surface morphology of anodized TiO 2 nanotubes. Electrochimica Acta, 74, pp. 244-253.

Roseley, A., Ansell, M.P., Smedley, D. and Porter, S., 2012. Creep of thixotropic adhesives in bonded-in timber connections as a function of temperature and humidity. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 5. , pp. 377-378.

Smedley, D., Tiew, J., Roseley, A., Ahmad, Z. and Ansell, M.P., 2012. Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 1. , pp. 502-503.

Taylor, J. and Bowen, C., 2012. Biocompatible CMOS Electrode Array. University of Bath.

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Ansell, M., Wilen, C. E. and Toivakka, M., 2012. Forthcoming. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of porous composites. Progress in Organic Coatings

Weekes, B., Almond, D. P., Cawley, P. and Barden, T., 2012. Eddy-current induced thermography: probability of detection study of small fatigue cracks in steel, titanium and nickel-based superalloy. NDT & E International, 49, pp. 47-56.

2011

Ahmad, Z., Ansell, M. P. and Smedley, D., 2011. Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Fracture Toughness Characteristics. Journal Of Engineering Materials And Technology, 133 (3), 031006.

Ahmad, Z., Ansell, M. P. and Smedley, D., 2011. Moisture absorption characteristics of epoxy based adhesive reinforced with CTBN and ceramic particles for bonded-in timber connection: Fickian or non-fickian behaviour. IOP Conference Series: Materials Science and Engineering, 17 (1), 012011.

Almond, D. P., Weekes, B., Li, T., Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S., 2011. Thermographic techniques for the detection of cracks in metallic components. Insight: Non-Destructive Testing and Condition Monitoring, 53 (11), pp. 614-620.

Amura, M., Meo, M. and Amerini, F., 2011. Baseline-free estimation of residual fatigue life using a third order acoustic nonlinear parameter. Journal of the Acoustical Society of America, 130 (4), pp. 1829-1837.

Angioni, S. L., Meo, M. and Foreman, A., 2011. A critical review of homogenization methods for 2D woven composites. Journal of Reinforced Plastics and Composites, 30 (22), pp. 1895-1906.

Benzeval, I., Turner, I. and Ellis, M., 2011. Physical and numerical design of a fluidised bed bioreactor for stem cell expansion. In: Inaugural South West Regional Regenerative Medicine Meeting, 2011-09-12 - 2011-09-13, Bristol.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2011. Physical and numberical design of a fluidised bed bioreactor for stem cell expansion. In: World Conference on Regenerative Medicine, 2011-11-02 - 2011-11-04, Leipzig.

Betts, D.N., Alicia Kim, H. and Bowen, C.R., 2011. Design optimization of stiffness characteristics for bistable composite laminates. In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics.

Betts, D.N., Alicia Kim, H. and Bowen, C.R., 2011. Optimization of bistable composite laminates with actuated state-change. In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics.

Bowen, C. R., Giddings, P., Salo, A. and Kim, H. A., 2011. Modeling and characterization of piezoelectrically actuated bistable composites. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 58 (9), pp. 1737-1750.

Burrows, S. E., Dixon, S., Pickering, S. G., Li, T. and Almond, D. P., 2011. Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, 44 (7), pp. 589-596.

Chatterjee, K., Tuli, S., Pickering, S. G. and Almond, D. P., 2011. A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques. NDT & E International, 44 (7), pp. 655-667.

Ciampa, F. and Meo, M., 2011. Acoustic emission localization in complex dissipative anisotropic structures using a one-channel reciprocal time reversal method. Journal of the Acoustical Society of America, 130 (1), pp. 168-175.

Guida, M., Marulo, F., Meo, M., Grimaldi, A. and Olivares, G., 2011. SPH - Lagrangian study of bird impact on leading edge wing. Composite Structures, 93 (3), pp. 1060-1071.

Lewis, R. W. C., Dent, A. C. E., Stevens, R. and Bowen, C. R., 2011. Microstructural modelling of the polarization and properties of porous ferroelectrics. Smart Materials and Structures, 20 (8), 085002.

Li, T., Almond, D. P. and Rees, D. A. S., 2011. Crack imaging by scanning laser-line thermography and laser-spot thermography. Measurement Science & Technology, 22 (3), 035701.

Li, T., Almond, D. P. and Rees, D. A. S., 2011. Crack imaging by scanning pulsed laser spot thermography. NDT & E International, 18 (1), pp. 117-123.

Meo, M., 2011. Modelling Wave Propagation in Nonlinear Elastic Solids. In: Vanhille, C. and Campos-Pozuelo, C., eds. Computational Methods in Nonlinear Acoustics: Current Trends. Transworld Research Network.

Pernice, M. F., Annicchiarico, D., Petriccione, A., De Tommaso, G., Meo, M., Antonucci, V. and Zarrelli, M., 2011. Structural polymer composite materials for muscle-skeletal diagnostic systems. Journal of Reinforced Plastics and Composites, 30 (4), pp. 287-300.

Regonini, D., Dent, A. C. E., Bowen, C. R., Pennock, S. R. and Taylor, J., 2011. Impedance spectroscopy analysis of TinO2n-1 Magnéli phases. Materials Letters, 65 (23-24), pp. 3590-3592.

Song, Y. Z., Xiao, B., Hall, P. and Wang, L., 2011. In search of perceptually salient groupings. IEEE Transactions on Image Processing, 20 (4), pp. 935-947.

Tian, G. Y., Wilson, J., Cheng, L., Almond, D. P., Kostson, E. and Weekes, B., 2011. Pulsed eddy current thermography and applications. Lecture Notes in Electrical Engineering, 96, pp. 205-231.

Topolov, V. Y., Bowen, C. R. and Bisegna, P., 2011. Electromechanical coupling factors of novel 0-3-0 composites based on PMN-xPT single crystals. Ferroelectrics, 422 (1), pp. 40-43.

Topolov, V. Y., Bisegna, P. and Bowen, C. R., 2011. Analysis of the piezoelectric performance of modern 0-3-type composites based on relaxor-ferroelectric single crystals. Ferroelectrics, 413 (1), pp. 176-191.

2010

Ahmad, Z., Ansell, M. P. and Smedley, D., 2010. Epoxy adhesives modified with nano- and microparticles for in situ timber bonding: effect of environment on mechanical properties and moisture uptake. Journal Of Engineering Materials And Technology, 132 (3), 031016.

Ahmad, Z., Ansell, M. and Smedley, D., 2010. Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding. International Journal of Adhesion and Adhesives, 30 (7), pp. 539-549.

Amerini, F., Barbieri, E., Meo, M. and Polimeno, U., 2010. Detecting loosening/tightening of clamped structures using nonlinear vibration techniques. Smart Materials and Structures, 19 (8), 085013.

Amerini, F. and Meo, M., 2010. Structural health monitoring of bolted joints using linear and nonlinear acoustic methods. In: Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. , pp. 590-600.

Ansell, M.P., Muhammad Roseley, A. S. and Smedley, D., 2010. Stability of room temperature cure epoxy adhesives for timber structures under creep loading in tension and shear. In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Vol. 4. Engineered Wood Products Association, pp. 2900-2906.

Baxter, F. R., Bowen, C. R., Turner, I. G. and Dent, A. C. E., 2010. Electrically active bioceramics: a review of interfacial responses. Annals of Biomedical Engineering, 38 (6), pp. 2079-2092.

Ciampa, F. and Meo, M., 2010. A new algorithm for acoustic emission localization and flexural group velocity determination in anisotropic structures. Composites Part A Applied Science and Manufacturing, 41 (12), pp. 1777-1786.

Ciampa, F. and Meo, M., 2010. A new wavelet based algorithm for impact identificationand group velocity determination in composite structures. In: Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. , pp. 1057-1063.

Ciampa, F. and Meo, M., 2010. Acoustic emission source localization and velocity determination of the fundamental mode A0 using wavelet analysis and a Newton-based optimization technique. Smart Materials and Structures, 19 (4), 045027.

Dolce, F. and Meo, M., 2010. Structural response of laminated composite plates to blast load. In: 2010 Enginsoft International Conference, 2010-10-21 - 2010-10-22, Fiera Montichiari (BS).

Jaroenworaluck, A., Regonini, D., Bowen, C. R. and Stevens, R., 2010. A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes. Applied Surface Science, 256 (9), pp. 2672-2679.

Lewis, R. W. C., Merrick, A. J., Dent, A. C. E. and Bowen, C. R., 2010. The influence of mechanical stress on piezoceramic tubes. In: 2010 IEEE International Symposium on the Applications of Ferroelectrics. New York: IEEE.

Packham, D. E., 2010. Discontinuities at the interface and adhesion. Journal of Adhesion, 86 (12), pp. 1231-1243.

Panzera, T. H., Borges, P. H. R., Rubio, J. C., Bowen, C. R., Strecker, K. and Sabariz, A. L. R., 2010. The dielectric response of compacted cementitious composites. Advances in Cement Research, 22 (3), pp. 127-134.

Polimeno, U., Meo, M., Almond, D. and Angioni, S., 2010. Detecting low velocity impact damage in composite plate using nonlinear acoustic methods. Applied Composite Materials, 17 (5), pp. 481-488.

Regonini, D., Jaroenworaluck, A., Stevens, R. and Bowen, C. R., 2010. Effect of heat treatment on the properties and structure of TiO2 nanotubes: phase composition and chemical composition. Surface and Interface Analysis, 42 (3), pp. 139-144.

Topolov, V. Y., Krivoruchko, A. V., Bowen, C. R. and Panich, A. A., 2010. Hydrostatic Piezoelectric Coefficients of the 2-2 Composite Based on 011 -poled 0.71Pb(Mg1/3Nb2/3)O-3-0.29PbTiO(3) Single Crystal. Ferroelectrics, 400 (1), pp. 410-416.

Visrolia, A., Angioni, S. L. and Meo, M., 2010. A hierarchical XFEM plate model for the simulation of composite laminates failure. In: ECCM 2010: IV European Conference on Computational Mechanics, 2010-05-16 - 2010-05-21, Palais des Congrès, Paris.

Wilson, J., Tian, G. Y., Abidin, I. Z., Yang, S. X. and Almond, D., 2010. Pulsed eddy current thermography: system development and evaluation. Insight: Non-Destructive Testing and Condition Monitoring, 52 (2), pp. 87-90.

Wilson, J., Tian, G. Y., Abidin, I. Z., Yang, S. and Almond, D., 2010. Modelling and evaluation of eddy current stimulated thermography. Nondestructive Testing and Evaluation, 25 (3), pp. 205-218.

Zainal Abidin, I., Yun Tian, G., Wilson, J., Yang, S. and Almond, D., 2010. Quantitative evaluation of angular defects by pulsed eddy current thermography. NDT & E International, 43 (7), pp. 537-546.

2009

Bowen, C. R., Topolov, V. Y. and Dent, A. C. E., 2009. Electromechanical properties of hydroxyapatite / BaTiO3 composites. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R., Cartmell, S. and Chaudhuri, J., 2009. Influence of porosity on polarisation and electrical properties of hydroxyapatite based ceramics. Ferroelectrics, 390 (1), pp. 168-176.

Guida, M., Marulo, F., Polito, T., Meo, M. and Riccio, M., 2009. Design and testing of a fiber-metal-laminate bird-strike-resistant leading edge. Journal of Aircraft, 46 (6), pp. 2121-2129.

Hubbard, G., Abbott, S. J., Chen, Q., Allsopp, D. W. E., Wang, W. N., Bowen, C. R., Stevens, R., Satka, A., Hasko, D., Uherek, F. and Kovac, J., 2009. Wafer-scale transfer of nanoimprinted patterns into silicon substrates. Physica E-Low-Dimensional Systems & Nanostructures, 41 (6), pp. 1118-1121.

Kloss, S., Lewis, R. W. C., Dent, A., Weston, N., Jonas, K., Bowen, C. R., Hand, D. P. and Shephard, J. D., 2009. Electrode ablation on piezoelectric ceramics by NS-pulsed laser ablation for sensor applications. In: ICALEO 2009 - 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings. Vol. 102. Orlando: Laser Institute of America, pp. 1194-1203.

Packham, D. E., 2009. Adhesive technology and sustainability. International Journal of Adhesion and Adhesives, 29 (3), pp. 248-252.

Polimeno, U. and Almond, D. P., 2009. A compact thermosonic inspection system for the inspection of composites. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Regonini, D., Satka, A., Allsopp, D. W. E., Jaroenworaluck, A., Stevens, R. and Bowen, C. R., 2009. Anodised titania nanotubes prepared in a glycerol/NaF electrolyte. Journal of Nanoscience and Nanotechnology, 9 (7), pp. 4410-4416.

Topolov, V. Y., Bowen, C. R., Glushanin, S. V. and Panich, A. E., 2009. Electromechanical coupling in the novel 2-2 parallel-connected PMN-0.33PT single-domain crystal/polymer composite. Ferroelectrics, 393, pp. 27-37.

Topolov, V. Y., Bowen, C. R., Bisegna, P. and Krivoruchko, A. V., 2009. Performance of novel piezo-active- composites based on relaxor-ferroelectric single crystals. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

2008

Bowen, C. R., Dent, A. C. E., Almond, D. P. and Comyn, T. P., 2008. Modelling Power Law Dependencies of Frequency Dependent AC Conductivity and Permittivity of Conductor-Relaxor Composites. Ferroelectrics, 370, pp. 166-175.

Bowen, C., Bradley, L. R., Almond, D. and Wilcox, P. D., 2008. Flexible piezoelectric transducer for ultrasonic inspection of non-planar components. Ultrasonics, 48 (5), pp. 367-375.

Guida, M., Meo, M., Riccio, M. and Marulo, F., 2008. Analysis of bird impact on a composite tailplane leading edge. Applied Composite Materials, 15 (4-6), pp. 241-257.

Jaroenworaluck, A., Regonini, D., Bowen, C. and Stevens, R., 2008. Nucleation and early growth of anodized TiO2 film. Journal of Materials Research, 23 (8), pp. 2116-2124.

Lewis, R. W. C., Bowen, C. R., Dent, A. C. E. and Jonas, K., 2008. Finite element and experimental analysis of the vibration response of radially poled piezoceramic cylinders. Ferroelectrics, 389 (1), pp. 95-106.

Meo, M., Tammaro, U. and Capuano, P., 2008. Influence of topography on ground deformation at Mt. Vesuvius (Italy) by finite element modelling. International Journal of Non-Linear Mechanics, 43 (3), pp. 178-186.

Meo, M. and Zumpano, G., 2008. Damage assessment on plate-like structures using a global-local optimization approach. Optimization and Engineering, 9 (2), pp. 161-177.

Panzera, T. H., Rubio, J. C., Bowen, C. R. and Walker, P. J., 2008. Microstructural design of materials for aerostatic bearings. Cement & Concrete Composites, 30 (7), pp. 649-660.

Panzera, T. H., Rubio, J. C., Bowen, C., Vasconcelos, W. L., Strecker, K. and [No Value], [N. V.], 2008. Correlation between structure and pulse velocity of cementitious composites. Advances in Cement Research, 20 (3), pp. 101-108.

Polimeno, U., Meo, M. and Almond, D., 2008. Smart Nonlinear Acoustic Based Structural Health Monitoring System. Advances in Science and Technology, 56, pp. 426-434.

Polimeno, U. and Meo, M., 2008. Understanding the effect of boundary conditions on damage identification process when using non-linear elastic wave spectroscopy methods. International Journal of Non-Linear Mechanics, 43 (3), pp. 187-193.

Ramesh, R., Kara, H., Stevens, R. and Bowen, C., 2008. Progress in porous piezoceramics. In: Rosslere, D., ed. Developments in Ceramic Materials Research. Nova Publishers, pp. 211-240.

Regonini, D., 2008. Anodised TiO2 nanotubes: synthesis, growth mechanism and thermal stability. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Stevens, R., Regonini, D., Bowen, C. R. and Jaroenworakluck, A., 2008. Nanosized Titania, a smart material or is it just clever? Advanced Materials Research, 55-57, pp. 23-36.

Topolov, V. Y., Krivoruchko, A., Bisegna, P. and Bowen, C., 2008. Orientation effects in 1-3 composites based on 0.93Pb(Zn1/3Nb2/3)O3- 0.07PbTiO3 single crystals. Ferroelectrics, 376 (1), pp. 140-152.

Zumpano, G. and Meo, M., 2008. Damage detection in an aircraft foam sandwich panel using nonlinear elastic wave spectroscopy. Computers and Structures, 86 (3-5), pp. 483-490.

1995

Saintey, M. B. and Almond, D. P., 1995. Defect sizing by transient thermography. II. A numerical treatment. Journal of Physics D: Applied Physics, 28 (12), pp. 2539-2546.

1994

Almond, D. P. and Lau, S. K., 1994. Defect sizing by transient thermography. I. An analytical treatment. Journal of Physics D: Applied Physics, 27 (5), pp. 1063-1069.

Hailey, J. L., Turner, I. G., Miles, A. W. and Price, G., 1994. The effect of post-curing chemical changes on the mechanical properties of acrylic bone cement. Journal of Materials Science: Materials in Medicine, 5 (9-10), pp. 617-621.

1993

Almond, D. P. and Lau, S. K., 1993. Edge effects and a method of defect sizing for transient thermography. Applied Physics Letters, 62 (25), 3369.

1988

Almond, D.P., 1988. Comments on ultrasonic attenuation in high-TC superconductors. Journal of Physics C Solid State Physics, 21 (35), L1137-L1139.