Research

Items from Research Centres & Institutes > Materials Research Centre

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level: 195.

Book/s

Topolov, V. Y., Bisegna, P. and Bowen, C. R., 2014. Piezo-active composites : orientation effects and anisotropy factors. Berlin, Germany: Springer Berlin Heidelberg. (Springer Series in Materials Science; 185)

Book Sections

Amerini, F. and Meo, M., 2010. Structural health monitoring of bolted joints using linear and nonlinear acoustic methods. In: Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. , pp. 590-600.

Ansell, M.P., 2014. Natural fibre composites in a marine environment. In: Natural Fibre Composites. Woodhead Publishing Ltd., pp. 365-374.

Ansell, M.P., Muhammad Roseley, A. S. and Smedley, D., 2010. Stability of room temperature cure epoxy adhesives for timber structures under creep loading in tension and shear. In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Vol. 4. Engineered Wood Products Association, pp. 2900-2906.

Archila Santos, H. F., Ansell, M. P. and Walker, P., 2014. Elastic properties of thermo-hydro-mechanically modified bamboo (Guadua angustifolia Kunth) measured in tension. In: Key Engineering Materials. Vol. 600. , pp. 111-120.

Aziz, S.H. and Ansell, M.P., 2004. Optimising the properties of green composites. In: Green Composites. Woodhead Publishing Ltd., pp. 154-180.

Ball, R. J. and Allen, G. C., 2013. Hydraulic lime mortars: A study of mechanical properties. In: Barnett, S., ed. 33rd Cement & Concrete Science Conference. Portsmouth: University of Portsmouth.

Bernal, S., Ball, R., Hussein, O., Heath, A. and Provis, J., 2014. Paper sludge ash as a precursor for production of alkali-activated materials. In: Proceeding of the Second International Conference on Advances in Chemically-Activated Materials (CAM’2014). Changsha, China: .

Betts, D.N., Alicia Kim, H. and Bowen, C.R., 2011. Design optimization of stiffness characteristics for bistable composite laminates. In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics.

Betts, D.N., Alicia Kim, H. and Bowen, C.R., 2011. Optimization of bistable composite laminates with actuated state-change. In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics.

Betts, D. N., Bowen, C. R., Inman, D. J., Weaver, P. M. and Kim, H. A., 2014. Investigation of geometries of bistable piezoelectric-laminate plates for vibration-based energy harvesting. In: Liao, W.-H., ed. Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9057. .

Bird, A., McEnaney, B. and Sadler, B.A., 2013. Some Practical Consequences of Analyses of the Carboxy and Airburn Reactions of Anode Carbons. In: Tomsett, A. and Johnson, J., eds. Essential Readings in Light Metals:. Vol. 4. Hoboken, NJ.: Wiley, pp. 589-593.

Blenkinsopp, C.E., Turner, I.L., Mole, M.A., Garden, L. and Peirson, W.L., 2011. Light detection and ranging (LiDAR) for measurement of coastal processes. In: 20th Australasian Coastal and Ocean Engineering Conference 2011 and the 13th Australasian Port and Harbour Conference 2011, COASTS and PORTS 2011. NY: Curran Associates, pp. 757-762.

Bowen, C.R., Topolov, V.Y., Betts, D.N. and Kim, H.A., 2013. 2-2 composites based on [011]-poled relaxor-ferroelectric single crystals : from the piezoelectric anisotropy to the hydrostatic response. In: Schmid, U., Sanchez de Rojas Aldavero, J. L. and Leester-Schaedel, M., eds. Proceedings of SPIE - Smart Sensors, Actuators, and MEMS VI. Vol. 8763. Bellingham, WA: SPIE - Society of Photo-Optical Instrumentation Engineers.. (Proceedings of SPIE; 8763)

Bowen, C. R., Topolov, V. Y. and Dent, A. C. E., 2009. Electromechanical properties of hydroxyapatite / BaTiO3 composites. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Brandon, D., Ansell, M. P., Harris, R., Walker, P. and Bregulla, J., 2014. Modelling of non-metallic timber connections at elevated temperatures. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 231-241. (RILEM Bookseries; 9)

Ciampa, F. and Meo, M., 2010. A new wavelet based algorithm for impact identificationand group velocity determination in composite structures. In: Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. , pp. 1057-1063.

Ciampa, F., Pickering, S., Scarselli, G. and Meo, M., 2014. Nonlinear damage detection in composite structures using bispectral analysis. In: Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9064. .

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2013. A comparison between optimized active thermography and digital shearography for detection of damage in aerospace composite structures. In: Buyukozturk, O., Tasdemir, M. A., Gunes, O. and Akkaya, Y., eds. Nondestructive Testing of Materials and Structures. Dordrecht: Springer, pp. 641-647. (RILEM Bookseries; 6)

Huang, P., Chang, W.-S., Shea, A., Ansell, M. P. and Lawrence, R. M. H., 2014. Non-homogeneous thermal properties of bamboo. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 657-664. (RILEM Bookseries; 9)

Iervolino, O., Jenks, C.H. and Meo, M., 2014. Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM. In: Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9063. .

Kloss, S., Lewis, R. W. C., Dent, A., Weston, N., Jonas, K., Bowen, C. R., Hand, D. P. and Shephard, J. D., 2009. Electrode ablation on piezoelectric ceramics by NS-pulsed laser ablation for sensor applications. In: ICALEO 2009 - 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings. Vol. 102. Orlando: Laser Institute of America, pp. 1194-1203.

Lewis, R. W. C., Merrick, A. J., Dent, A. C. E. and Bowen, C. R., 2010. The influence of mechanical stress on piezoceramic tubes. In: 2010 IEEE International Symposium on the Applications of Ferroelectrics. New York: IEEE.

Meo, M., 2014. Acoustic emission sensors for assessing and monitoring civil infrastructures. In: Wang, M. L., Lynch, J. P. and Sohn, H., eds. Sensor Technologies for Civil Infrastructures. Vol. 1. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 159-178. (Woodhead Publishing Series in Electronic and Optical Materials)

Meo, M., 2014. Nonlinear acoustic and ultrasound methods for assessing and monitoring civil infrastructures. In: Wang, M. L., Lynch, J. P. and Sohn, H., eds. Sensor Technologies for Civil Infrastructures. Vol. 1. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 179-200. (Woodhead Publishing Series in Electronic and Optical Materials)

Meo, M., 2011. Modelling Wave Propagation in Nonlinear Elastic Solids. In: Vanhille, C. and Campos-Pozuelo, C., eds. Computational Methods in Nonlinear Acoustics: Current Trends. Transworld Research Network.

Parkes, P.N., Butler, R. and Almond, D.P., 2013. Fatigue of metal-composite joints with penetrative reinforcement. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics.

Pinto, F., D'Oriano, G. and Meo, M., 2014. Dielectric Elastomer based active layer for macro-scaled industrial application in roto-flexographic printing. In: Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9056. SPIE.

Polimeno, U. and Almond, D. P., 2009. A compact thermosonic inspection system for the inspection of composites. In: ICCM-17 - 17th International Conference on Composite Materials. Vancouver, Canada: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Ramesh, R., Kara, H., Stevens, R. and Bowen, C., 2008. Progress in porous piezoceramics. In: Rosslere, D., ed. Developments in Ceramic Materials Research. Nova Publishers, pp. 211-240.

Roseley, A., Ansell, M.P., Smedley, D. and Porter, S., 2012. Creep of thixotropic adhesives in bonded-in timber connections as a function of temperature and humidity. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 5. , pp. 377-378.

Smedley, D., Tiew, J., Roseley, A., Ahmad, Z. and Ansell, M.P., 2012. Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 1. , pp. 502-503.

Topolov, V. Y., Bowen, C. R., Bisegna, P. and Krivoruchko, A. V., 2009. Performance of novel piezo-active- composites based on relaxor-ferroelectric single crystals. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Topolov, V.Y., Bowen, C.R. and Glushanin, S.V., 2010. High performance of advanced composites based on relaxor-ferroelectric single crystals. In: Piezoceramic Materials and Devices. Nova Science Publishers Inc., pp. 71-112.

Turner, I.G., 2012. Orthopaedic coatings. In: Coatings for Biomedical Applications. Elsevier Inc, pp. 284-303.

Articles

Aarvold, A., Smith, J. O., Tayton, E. R., Lanham, S. A., Chaudhuri, J. B., Turner, I. G. and Oreffo, R. O.C., 2013. The effect of porosity of a biphasic ceramic scaffold on human skeletal stem cell growth and differentiation in vivo. Journal of Biomedical Materials Research - Part A, 101 (12), pp. 3431-3437.

Adamaki, V., Clemens, F., Ragulis, P., Pennock, S.R., Taylor, J. and Bowen, C.R., 2014. Manufacturing and characterization of Magnéli phase conductive fibres. Journal of Materials Chemistry A, 2 (22), pp. 8328-8333.

Adamaki, V., Clemens, F., Taylor, J., Mays, T.J. and Bowen, C.R., 2014. Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis. Journal of Materials Science, 49 (21), pp. 7597-7603.

Ahmad, Z., Ansell, M. P. and Smedley, D., 2011. Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Fracture Toughness Characteristics. Journal Of Engineering Materials And Technology, 133 (3), 031006.

Ahmad, Z., Ansell, M. P. and Smedley, D., 2010. Epoxy adhesives modified with nano- and microparticles for in situ timber bonding: effect of environment on mechanical properties and moisture uptake. Journal Of Engineering Materials And Technology, 132 (3), 031016.

Ahmad, Z., Ansell, M. P. and Smedley, D., 2011. Moisture absorption characteristics of epoxy based adhesive reinforced with CTBN and ceramic particles for bonded-in timber connection: Fickian or non-fickian behaviour. IOP Conference Series: Materials Science and Engineering, 17 (1), 012011.

Ahmad, Z., Ansell, M. and Smedley, D., 2010. Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding. International Journal of Adhesion and Adhesives, 30 (7), pp. 539-549.

Ahmad, Z., Ansell, M. P., Smedley, D. and Tahir, P. M., 2012. Creep behavior of epoxy-based adhesive reinforced with nanoparticles for bonded-in timber connection. Journal of Materials in Civil Engineering, 24 (7), pp. 825-831.

Alam, P., Ansell, M. P. and Smedley, D., 2013. Adhesively bonded plate and rod reinforcements for timber flexural beams. International Wood Products Journal, 4 (1), pp. 52-61.

Alam, P., Ansell, M. and Smedley, D., 2012. Effects of reinforcement geometry on strength and stiffness in adhesively bonded steel-timber flexural beams. Intelligent Buildings International, 2 (3), pp. 231-244.

Almond, D. P. and Pickering, S. G., 2014. Analysis of the delamination detection capabilities of pulse stimulated thermographic nondestructive testing techniques. Materials Evaluation, 72 (1), pp. 83-90.

Almond, D. P., Budd, C. J., Freitag, M. A., Hunt, G. W., McCullen, N. J. and Smith, N. D., 2013. The origin of power-law emergent scaling in large binary networks. Physica A: Statistical Mechanics and its Applications, 392 (4), pp. 1004-1027.

Almond, D.P., 1988. Comments on ultrasonic attenuation in high-TC superconductors. Journal of Physics C : Solid State Physics, 21 (35), L1137-L1139.

Almond, D. P. and Lau, S. K., 1994. Defect sizing by transient thermography. I. An analytical treatment. Journal of Physics D: Applied Physics, 27 (5), pp. 1063-1069.

Almond, D. P. and Pickering, S. G., 2012. An analytical study of the pulsed thermography defect detection limit. Journal of Applied Physics, 111 (9), 093510.

Almond, D. P., Weekes, B., Li, T., Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S., 2011. Thermographic techniques for the detection of cracks in metallic components. Insight: Non-Destructive Testing and Condition Monitoring, 53 (11), pp. 614-620.

Almond, D. P. and Lau, S. K., 1993. Edge effects and a method of defect sizing for transient thermography. Applied Physics Letters, 62 (25), 3369.

Amerini, F., Barbieri, E., Meo, M. and Polimeno, U., 2010. Detecting loosening/tightening of clamped structures using nonlinear vibration techniques. Smart Materials and Structures, 19 (8), 085013.

Amura, M., Meo, M. and Amerini, F., 2011. Baseline-free estimation of residual fatigue life using a third order acoustic nonlinear parameter. Journal of the Acoustical Society of America, 130 (4), pp. 1829-1837.

Amura, M. and Meo, M., 2012. Prediction of residual fatigue life using nonlinear ultrasound. Smart Materials and Structures, 21 (4), 045001.

Angioni, S. L., Meo, M. and Foreman, A., 2011. A critical review of homogenization methods for 2D woven composites. Journal of Reinforced Plastics and Composites, 30 (22), pp. 1895-1906.

Ansell, M. P., 2013. Multi-functional nano-materials for timber in construction. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 248-256.

Ball, R., Pesce, G. and Bowen, C., 2012. Characterisation of lime/metakaolin paste using impedance spectroscopy. Key Engineering Materials, 517, pp. 487-494.

Baxter, F. R., Bowen, C. R., Turner, I. G. and Dent, A. C. E., 2010. Electrically active bioceramics: a review of interfacial responses. Annals of Biomedical Engineering, 38 (6), pp. 2079-2092.

Benzeval, I., Bowen, C. R., Guy, R. H. and Delgado-Charro, M. B., 2013. Effects of iontophoresis, hydration, and permeation enhancers on human nail plate: Infrared and impedance spectroscopy assessment. Pharmaceutical Research, 30 (6), pp. 1652-1662.

Betts, D., Bowen, C.R., Kim, H.A., Gathercole, N., Clarke, C.T. and Inman, D.J., 2013. Nonlinear dynamics of a bistable piezoelectric-composite energy harvester for broadband application. European Physical Journal - Special Topics, 222 (7), pp. 1553-1562.

Betts, D.N., Bowen, C.R., Kim, H.A., Gathercole, N., Clarke, C.T. and Inman, D.J., 2013. Investigation of bistable piezo-composite plates for broadband energy harvesting. Proceedings of SPIE, 8688, 86881N.

Betts, D. N., Kim, H. A. and Bowen, C. R., 2012. Preliminary study of optimum piezoelectric cross-ply composites for energy harvesting. Smart Materials Research, 2012, 621364.

Bowen, C. R., Dent, A. C. E., Almond, D. P. and Comyn, T. P., 2008. Modelling Power Law Dependencies of Frequency Dependent AC Conductivity and Permittivity of Conductor-Relaxor Composites. Ferroelectrics, 370, pp. 166-175.

Bowen, C. R., Betts, D. N., Kim, H. A. and Yu. Topolov, V., 2014. 2–2 composites based on [011]-poled relaxor-ferroelectric single crystals : Analysis of the piezoelectric anisotropy and squared figures of merit for energy harvesting applications. Microsystem Technologies, 20 (4-5), pp. 709-717.

Bowen, C. R., Kim, H. A. and Salo, A. I. T., 2014. Active composites based on bistable laminates. Procedia Engineering, 75, pp. 140-144.

Bowen, C. R., Kim, H. A., Weaver, P. M. and Dunn, S., 2014. Piezoelectric and ferroelectric materials and structures for energy harvesting applications. Energy & Environmental Science, 7 (1), pp. 25-44.

Bowen, C.R., 2014. Preface. Applied Mechanics and Materials, 487.

Bowen, C.R. and Topolov, V.Y., 2014. Polarisation orientation effects and hydrostatic parameters in novel 2-2 composites basedon PMN-x PT single crystals. Ferroelectrics, 466 (1), pp. 21-28.

Bowen, C.R., Watson, M., Betts, D.N., Harris, P., Bertin, M. and Kim, H.A., 2014. Piezoelectric fibres integrated into structural composites. Ferroelectrics, 466 (1), pp. 14-20.

Bowen, C. R., Buschhorn, S. and Adamaki, V., 2014. Manufacture and characterization of conductor-insulator composites based on carbon nanotubes and thermally reduced graphene oxide. Pure and Applied Chemistry, 86 (5), pp. 765-774.

Bowen, C., Bradley, L. R., Almond, D. and Wilcox, P. D., 2008. Flexible piezoelectric transducer for ultrasonic inspection of non-planar components. Ultrasonics, 48 (5), pp. 367-375.

Bowen, C. R., Giddings, P., Salo, A. and Kim, H. A., 2011. Modeling and characterization of piezoelectrically actuated bistable composites. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 58 (9), pp. 1737-1750.

Brampton, C.J., Betts, D.N., Bowen, C.R. and Kim, H.A., 2013. Sensitivity of bistable laminates to uncertainties in material properties, geometry and environmental conditions. Composite Structures, 102, pp. 276-286.

Brennan, J., Pedreschi, R., Walker, P. and Ansell, M., 2013. The potential of advanced textiles for fabric formwork. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 229-237.

Burrows, S. E., Dixon, S., Pickering, S. G., Li, T. and Almond, D. P., 2011. Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, 44 (7), pp. 589-596.

Cartmell, S. H., Thurstan, S., Gittings, J. P., Griffiths, S., Bowen, C. R. and Turner, I. G., 2014. Polarization of porous hydroxyapatite scaffolds : influence on osteoblast cell proliferation and extracellular matrix production. Journal of Biomedical Materials Research - Part A, 102 (4), pp. 1047-1052.

Chatterjee, K., Tuli, S., Pickering, S. G. and Almond, D. P., 2011. A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques. NDT & E International, 44 (7), pp. 655-667.

Ciampa, F., Meo, M. and Barbieri, E., 2012. Impact localization in composite structures of arbitrary cross section. Structural Health Monitoring - An International Journal, 11 (6), pp. 643-655.

Ciampa, F., Onder, E., Barbieri, E. and Meo, M., 2014. Forthcoming. Detection and modelling of nonlinear elastic response in damaged composite structures. Journal of Nondestructive Evaluation

Ciampa, F., Barbieri, E. and Meo, M., 2014. Modelling of multiscale nonlinear interaction of elastic waves with three-dimensional cracks. The Journal of the Acoustical Society of America, 135 (6), pp. 3209-3220.

Ciampa, F. and Meo, M., 2010. A new algorithm for acoustic emission localization and flexural group velocity determination in anisotropic structures. Composites Part A Applied Science and Manufacturing, 41 (12), pp. 1777-1786.

Ciampa, F. and Meo, M., 2011. Acoustic emission localization in complex dissipative anisotropic structures using a one-channel reciprocal time reversal method. Journal of the Acoustical Society of America, 130 (1), pp. 168-175.

Ciampa, F. and Meo, M., 2010. Acoustic emission source localization and velocity determination of the fundamental mode A0 using wavelet analysis and a Newton-based optimization technique. Smart Materials and Structures, 19 (4), 045027.

Ciampa, F. and Meo, M., 2012. Nonlinear elastic imaging using reciprocal time reversal and third order symmetry analysis. Journal of the Acoustical Society of America, 131 (6), pp. 4316-4323.

Cota, F. D. P., Panzera, T. H., Schiavon, M. A., Christoforo, A. L., Borges, P. H. R., Bowen, C. and Scarpa, F., 2012. Full factorial design analysis of carbon nanotube polymer-cement composites. Materials Research, 15 (4), pp. 573-580.

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2012. A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization. NDT & E International, 45 (1), pp. 91-96.

Gavrilov, D., Maev, R.G. and Almond, D.P., 2014. A review of imaging methods in analysis of works of art : Thermographic imaging method in art analysis. Canadian Journal of Physics, 92 (4), pp. 341-364.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R., Cartmell, S. and Chaudhuri, J., 2009. Influence of porosity on polarisation and electrical properties of hydroxyapatite based ceramics. Ferroelectrics, 390 (1), pp. 168-176.

Guida, M., Marulo, F., Meo, M., Grimaldi, A. and Olivares, G., 2011. SPH - Lagrangian study of bird impact on leading edge wing. Composite Structures, 93 (3), pp. 1060-1071.

Guida, M., Marulo, F., Meo, M. and Russo, S., 2012. Experimental tests analysis of fiber metal laminate under birdstrike. Mechanics of Advanced Materials and Structures, 19 (5), pp. 376-395.

Guida, M., Marulo, F., Polito, T., Meo, M. and Riccio, M., 2009. Design and testing of a fiber-metal-laminate bird-strike-resistant leading edge. Journal of Aircraft, 46 (6), pp. 2121-2129.

Guida, M., Meo, M., Riccio, M. and Marulo, F., 2008. Analysis of bird impact on a composite tailplane leading edge. Applied Composite Materials, 15 (4-6), pp. 241-257.

Hailey, J. L., Turner, I. G., Miles, A. W. and Price, G., 1994. The effect of post-curing chemical changes on the mechanical properties of acrylic bone cement. Journal of Materials Science: Materials in Medicine, 5 (9-10), pp. 617-621.

Hubbard, G., Abbott, S. J., Chen, Q., Allsopp, D. W. E., Wang, W. N., Bowen, C. R., Stevens, R., Satka, A., Hasko, D., Uherek, F. and Kovac, J., 2009. Wafer-scale transfer of nanoimprinted patterns into silicon substrates. Physica E-Low-Dimensional Systems & Nanostructures, 41 (6), pp. 1118-1121.

Jaroenworaluck, A., Regonini, D., Bowen, C. R. and Stevens, R., 2010. A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes. Applied Surface Science, 256 (9), pp. 2672-2679.

Jaroenworaluck, A., Regonini, D., Bowen, C. and Stevens, R., 2008. Nucleation and early growth of anodized TiO2 film. Journal of Materials Research, 23 (8), pp. 2116-2124.

Jiang, Q., Lewins, C.J., Allsopp, D.W.E., Bowen, C.R., Wang, W.N., Satka, A., Priesol, J. and Uherek, F., 2013. Enhanced photoluminescence from InGaN/GaN quantum wells on a GaN/Si(111) template with extended three-dimensional GaN growth on low-temperature AIN interlayer. Japanese Journal of Applied Physics, 52 (6), 061002.

Jiang, Q., Allsopp, D. W. E., Bowen, C. R. and Wang, W. N., 2013. The management of stress in MOCVD-grown InGaN/GaN LED multilayer structures on Si(1 1 1) substrates. Semiconductor Science and Technology, 28 (9), 094010.

Jiang, Q., Lewins, C. J., Allsopp, D. W. E., Bowen, C. R. and Wang, W. N., 2013. Investigation of strain-relaxation characteristics of nitrides grown on Si(110) by metalorganic chemical vapor deposition using X-ray diffraction. Japanese Journal of Applied Physics, 52 (8 PART2), 08JB24.

Koutitas, G., Chiaraviglio, L., Ciullo, D., Meo, M. and Tassiulas, L., 2014. Energy-aware base stations : the effect of planning, management, and femto Layers. Journal of Electrical and Computer Engineering

Le Boulbar, E.D., Edwards, M.J., Vittoz, S., Vanko, G., Brinkfeldt, K., Rufer, L., Johander, P., Lalinský, T., Bowen, C.R. and Allsopp, D.W.E., 2013. Effect of bias conditions on pressure sensors based on AlGaN/GaN High Electron Mobility Transistor. Sensors and Actuators A-Physical, 194, pp. 247-251.

Lewis, R. W. C., Bowen, C. R., Dent, A. C. E. and Jonas, K., 2009. Finite element and experimental analysis of the vibration response of radially poled piezoceramic cylinders. Ferroelectrics, 389 (1 PART 1), pp. 95-106.

Lewis, R. W. C., Dent, A. C. E., Stevens, R. and Bowen, C. R., 2011. Microstructural modelling of the polarization and properties of porous ferroelectrics. Smart Materials and Structures, 20 (8), 085002.

Li, T., Almond, D. P. and Rees, D. A. S., 2011. Crack imaging by scanning laser-line thermography and laser-spot thermography. Measurement Science & Technology, 22 (3), 035701.

Li, T., Almond, D. P. and Rees, D. A. S., 2011. Crack imaging by scanning pulsed laser spot thermography. NDT & E International, 18 (1), pp. 117-123.

Mackenzie, C., Ormondroyd, G., Curling, S., Ball, R. J., Whiteley, N. and Malham, S., 2014. Ocean warming, more than acidification, reduces shell strength in a commercial shellfish species during food limitation. PLoS ONE, 9 (1), e86764.

Madhoushi, M., Chavooshi, A., Ashori, A., Ansell, M. P. and Shakeri, A., 2014. Properties of wood plastic composite panels made from waste sanding dusts and nanoclay. Journal of Composite Materials, 48 (14), pp. 1661-1669.

Margalha, M. G., Silva, A. S., Do Rosário Veiga, M., De Brito, J., Ball, R. J. and Allen, G. C., 2013. Microstructural changes of lime putty during aging. Journal of Materials in Civil Engineering, 25 (10), pp. 1524-1532.

Meo, M., Tammaro, U. and Capuano, P., 2008. Influence of topography on ground deformation at Mt. Vesuvius (Italy) by finite element modelling. International Journal of Non-Linear Mechanics, 43 (3), pp. 178-186.

Meo, M. and Zumpano, G., 2008. Damage assessment on plate-like structures using a global-local optimization approach. Optimization and Engineering, 9 (2), pp. 161-177.

Morgan, R. C. and Ball, R. J., 2013. Environmental (wet and dry) cycling of hydraulic lime mortars. Journal of the Building Limes Forum, 20, pp. 21-31.

Nuño, M., Ball, R. J. and Bowen, C. R., 2014. Study of solid/gas phase photocatalytic reactions by electron ionization mass spectrometry. Journal of Mass Spectrometry, 49 (8), pp. 716-726.

Packham, D. E., 2009. Adhesive technology and sustainability. International Journal of Adhesion and Adhesives, 29 (3), pp. 248-252.

Packham, D. E., 2010. Discontinuities at the interface and adhesion. Journal of Adhesion, 86 (12), pp. 1231-1243.

Panzera, T. H., Borges, P. H. R., Rubio, J. C., Bowen, C. R., Strecker, K. and Sabariz, A. L. R., 2010. The dielectric response of compacted cementitious composites. Advances in Cement Research, 22 (3), pp. 127-134.

Panzera, T. H., Christoforo, A. L., Campos Rubio, J. C., Bowen, C. R., Borges, P. H. R. and Silva, L. J., 2013. Evaluation of compacted cementitious composites for porous bearings. International Journal of Applied Ceramic Technology, 10 (3), pp. 474-483.

Panzera, T. H., Rubio, J. C., Bowen, C. R. and Walker, P. J., 2008. Microstructural design of materials for aerostatic bearings. Cement & Concrete Composites, 30 (7), pp. 649-660.

Panzera, T. H., Rubio, J. C., Bowen, C., Vasconcelos, W. L., Strecker, K. and [No Value], [N. V.], 2008. Correlation between structure and pulse velocity of cementitious composites. Advances in Cement Research, 20 (3), pp. 101-108.

Patel, S., Vaish, R., Sinha, N. and Bowen, C. R., 2014. Finite element analysis of the microstructure of AlN-TiN composites. Strain, 50 (3), pp. 250-261.

Pernice, M. F., Annicchiarico, D., Petriccione, A., De Tommaso, G., Meo, M., Antonucci, V. and Zarrelli, M., 2011. Structural polymer composite materials for muscle-skeletal diagnostic systems. Journal of Reinforced Plastics and Composites, 30 (4), pp. 287-300.

Pesce, G. L., Bowen, C. R., Rocha, J., Sardo, M., Allen, G. C., Walker, P. J., Denuault, G., Serrapede, M. and Ball, R., 2014. Monitoring hydration in lime-metakaolin composites using electrochemical impedance spectroscopy and nuclear magnetic resonance spectroscopy. Clay Minerals, 49 (3), pp. 341-358.

Pesce, G. L. A., Ball, R. J., Quarta, G. and Calcagnile, L., 2012. Identification, extraction, and preparation of reliable lime samples for 14C dating of plasters and mortars with the “pure lime lumps” technique. Radiocarbon, 54 (3-4), pp. 933-942.

Pesce, G. L., Morgan, D., Odgers, D., Henry, A., Allen, M. and Ball, R. J., 2013. Consolidation of weathered limestone using nanolime. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 213-228.

Pickering, S.G., Chatterjee, K., Almond, D.P. and Tuli, S., 2013. LED optical excitation for the long pulse and lock-in thermographic techniques. NDT & E International, 58, pp. 72-77.

Pickering, S. G. and Almond, D. P., 2010. Comparison of the defect detection capabilities of flash thermography and vibration excitation shearography. Insight: Non-Destructive Testing and Condition Monitoring, 52 (2), pp. 78-81.

Pinto, F., Maroun, F.Y. and Meo, M., 2014. Material enabled thermography. NDT & E International, 67, pp. 1-9.

Pinto, F., Ciampa, F., Meo, M. and Polimeno, U., 2012. Multifunctional SMArt composite material for in situ NDT/SHM and de-icing. Smart Materials and Structures, 21 (10), 105010.

Pinto, F., White, A. and Meo, M., 2013. Characterisation of ductile prepregs. Applied Composite Materials, 20 (2), pp. 195-211.

Polimeno, U., Meo, M. and Almond, D., 2008. Smart Nonlinear Acoustic Based Structural Health Monitoring System. Advances in Science and Technology, 56, pp. 426-434.

Polimeno, U., Almond, D. P., Weekes, B. and Chen, E. W. J., 2014. A compact thermosonic inspection system for the inspection of composites. Composites Part B-Engineering, 59, pp. 67-73.

Polimeno, U. and Meo, M., 2008. Understanding the effect of boundary conditions on damage identification process when using non-linear elastic wave spectroscopy methods. International Journal of Non-Linear Mechanics, 43 (3), pp. 187-193.

Polimeno, U., Meo, M., Almond, D. and Angioni, S., 2010. Detecting low velocity impact damage in composite plate using nonlinear acoustic methods. Applied Composite Materials, 17 (5), pp. 481-488.

Prajer, M. and Ansell, M.P., 2014. Bio-composites for structural applications : Poly-l-lactide reinforced with long sisal fiber bundles. Journal of Applied Polymer Science, 131 (21).

Prajer, M. and Ansell, M., 2012. Observation of transcrystalline growth of PLA crystals on sisal fibre bundles and the effect of crystal structure on interfacial shear strength. Composite Interfaces, 19 (1), pp. 39-50.

Ptaszek, G., Cawley, P., Almond, D. and Pickering, S., 2012. Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems. NDT & E International, 45 (1), pp. 71-78.

Ptaszek, G., Cawley, P., Almond, D. and Pickering, S., 2013. Transient thermography testing of unpainted thermal barrier coating (TBC) systems. NDT & E International, 59, pp. 48-56.

Regonini, D., Satka, A., Allsopp, D. W. E., Jaroenworaluck, A., Stevens, R. and Bowen, C. R., 2009. Anodised titania nanotubes prepared in a glycerol/NaF electrolyte. Journal of Nanoscience and Nanotechnology, 9 (7), pp. 4410-4416.

Regonini, D., Adamaki, V., Bowen, C.R., Dent, A.C.E., Pennock, S.R. and Taylor, J., 2012. AC electrical properties of TiO2 and Magnéli phases, TinO2n−1. Solid State Ionics, 229, pp. 38-44.

Regonini, D., Bowen, C. R., Jaroenworaluck, A. and Stevens, R., 2013. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes. Materials Science & Engineering R - Reports, 74 (12), pp. 377-406.

Regonini, D., Dent, A. C. E., Bowen, C. R., Pennock, S. R. and Taylor, J., 2011. Impedance spectroscopy analysis of TinO2n-1 Magnéli phases. Materials Letters, 65 (23-24), pp. 3590-3592.

Regonini, D., Jaroenworaluck, A., Stevens, R. and Bowen, C. R., 2010. Effect of heat treatment on the properties and structure of TiO2 nanotubes: phase composition and chemical composition. Surface and Interface Analysis, 42 (3), pp. 139-144.

Regonini, D., Satka, A., Jaroenworaluck, A., Allsopp, D. W. E., Bowen, C. R. and Stevens, R., 2012. Factors influencing surface morphology of anodized TiO 2 nanotubes. Electrochimica Acta, 74, pp. 244-253.

Saintey, M. B. and Almond, D. P., 1995. Defect sizing by transient thermography. II. A numerical treatment. Journal of Physics D: Applied Physics, 28 (12), pp. 2539-2546.

Sangiah, D., Plummer, A. R., Bowen, C. and Guerrier, P., 2013. A novel piezohydraulic aerospace servovalve. Part I : Design and modelling. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (4), pp. 371-389.

Scobie, J. A., Pickering, S. G., Almond, D. P. and Lock, G. D., 2013. Fluid dynamics of cricket ball swing. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 227 (3), pp. 196-208.

Serrapede, M., Denuault, G., Sosna, M., Pesce, G.L. and Ball, R.J., 2013. Scanning electrochemical microscopy : using the potentiometric mode of SECM to study the mixed potential arising from two independent redox processes. Analytical Chemistry, 85 (17), pp. 8341-8346.

Serrapede, M., Pesce, G. L., Ball, R. J. and Denuault, G., 2014. Nanostructured Pd hydride microelectrodes : In situ monitoring of pH variations in a porous medium. Analytical Chemistry, 86 (12), pp. 5758-5765.

Sharma, G. D., Prakash Singh, S., Nagarjuna, P., Mikroyannidis, J. A., Ball, R. J. and Kurchania, R., 2013. Efficient dye-sensitized solar cells based on cosensitized metal free organic dyes with complementary absorption spectra. Journal of Renewable and Sustainable Energy, 5 (4), 043107.

Sharma, G. D., Singh, S. P., Kurchania, R. and Ball, R. J., 2013. Cosensitization of dye sensitized solar cells with a thiocyanate free Ru dye and a metal free dye containing thienylfluorene conjugation. RSC Advances, 3 (17), pp. 6036-6043.

Song, Y. Z., Xiao, B., Hall, P. and Wang, L., 2011. In search of perceptually salient groupings. IEEE Transactions on Image Processing, 20 (4), pp. 935-947.

Song, Y.-Z., Bowen, C. R., Kim, A. H., Nassehi, A., Padget, J. and Gathercole, N., 2014. Virtual visual sensors and their application in structural health monitoring. Structural Health Monitoring - An International Journal, 13 (3), pp. 251-264.

Song, Y.-Z., Bowen, C. R., Kim, H. A., Nassehi, A., Padget, J., Gathercole, N. and Dent, A., 2014. Non-invasive damage detection in beams using marker extraction and wavelets. Mechanical Systems and Signal Processing, 49 (1-2), pp. 13-23.

Stevens, R., Regonini, D., Bowen, C. R. and Jaroenworakluck, A., 2008. Nanosized Titania, a smart material or is it just clever? Advanced Materials Research, 55-57, pp. 23-36.

Tian, G. Y., Wilson, J., Cheng, L., Almond, D. P., Kostson, E. and Weekes, B., 2011. Pulsed eddy current thermography and applications. Lecture Notes in Electrical Engineering, 96, pp. 205-231.

Topolov, V. Y., Bowen, C. R., Glushanin, S. V. and Panich, A. E., 2009. Electromechanical coupling in the novel 2-2 parallel-connected PMN-0.33PT single-domain crystal/polymer composite. Ferroelectrics, 393, pp. 27-37.

Topolov, V. Y., Krivoruchko, A. V., Bowen, C. R. and Panich, A. A., 2010. Hydrostatic Piezoelectric Coefficients of the 2-2 Composite Based on 011 -poled 0.71Pb(Mg1/3Nb2/3)O-3-0.29PbTiO(3) Single Crystal. Ferroelectrics, 400 (1), pp. 410-416.

Topolov, V. Y., Bowen, C. R. and Bisegna, P., 2011. Electromechanical coupling factors of novel 0-3-0 composites based on PMN-xPT single crystals. Ferroelectrics, 422 (1), pp. 40-43.

Topolov, V. Y., Bisegna, P. and Bowen, C. R., 2011. Analysis of the piezoelectric performance of modern 0-3-type composites based on relaxor-ferroelectric single crystals. Ferroelectrics, 413 (1), pp. 176-191.

Topolov, V. Y., Krivoruchko, A., Bisegna, P. and Bowen, C., 2008. Orientation effects in 1-3 composites based on 0.93Pb(Zn1/3Nb2/3)O3- 0.07PbTiO3 single crystals. Ferroelectrics, 376 (1), pp. 140-152.

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Ansell, M., Wilen, C. E. and Toivakka, M., 2012. Forthcoming. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of porous composites. Progress in Organic Coatings

Touaiti, F., Pahlevan, M., Nilsson, R., Alam, P., Toivakka, M., Ansell, M.P. and Wilen, C.E., 2013. Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of pigment coating. Progress in Organic Coatings, 76 (1), pp. 101-106.

Vats, G., Vaish, R. and Bowen, C.R., 2013. Forthcoming. Selection of ferroelectric ceramics for transducers and electrical energy storage devices. International Journal of Applied Ceramic Technology

Vats, G., Vaish, R. and Bowen, C. R., 2014. An analysis of lead-free (Bi0.5Na0.5)0.915-(Bi0.5K0.5)0.05Ba0.02Sr0.015TiO3 ceramic for efficient refrigeration and thermal energy harvesting. Journal of Applied Physics, 115 (1).

Weekes, B., Almond, D. P., Cawley, P. and Barden, T., 2012. Eddy-current induced thermography: probability of detection study of small fatigue cracks in steel, titanium and nickel-based superalloy. NDT & E International, 49, pp. 47-56.

Wilson, J., Tian, G. Y., Abidin, I. Z., Yang, S. X. and Almond, D., 2010. Pulsed eddy current thermography: system development and evaluation. Insight: Non-Destructive Testing and Condition Monitoring, 52 (2), pp. 87-90.

Wilson, J., Tian, G. Y., Abidin, I. Z., Yang, S. and Almond, D., 2010. Modelling and evaluation of eddy current stimulated thermography. Nondestructive Testing and Evaluation, 25 (3), pp. 205-218.

Zainal Abidin, I., Yun Tian, G., Wilson, J., Yang, S. and Almond, D., 2010. Quantitative evaluation of angular defects by pulsed eddy current thermography. NDT & E International, 43 (7), pp. 537-546.

Zumpano, G. and Meo, M., 2008. Damage detection in an aircraft foam sandwich panel using nonlinear elastic wave spectroscopy. Computers and Structures, 86 (3-5), pp. 483-490.

Conference or Workshop Items

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Regenerative Sports Arena, 2012-07-13, Bath.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: Tissue and Cell Engineering Society Annual Conference (TCES), 2013-07-23 - 2013-07-25, Cardiff.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: 9th Bath Biomechanics Symposium, 2013-09-16, Bath.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Stem cell expansion in a fluidised bed bioreactor for accelerated osseointegration of bone substitute material. In: TERMIS, 2012-09-04 - 2012-09-08, Vienna.

Benzeval, I., Turner, I. and Ellis, M., 2011. Physical and numerical design of a fluidised bed bioreactor for stem cell expansion. In: Inaugural South West Regional Regenerative Medicine Meeting, 2011-09-12 - 2011-09-13, Bristol.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Tissue and Cell Engineering Society annual conference, 2012-07-04 - 2012-07-06, Liverpool.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2011. Physical and numberical design of a fluidised bed bioreactor for stem cell expansion. In: World Conference on Regenerative Medicine, 2011-11-02 - 2011-11-04, Leipzig.

Betts, D., Bowen, C. R., Inman, D. J. and Kim, H. A., 2014. Novel model for arbitrary shape bistable piezoelectric-composite plates for vibration-based energy harvesting. In: Active and Passive Smart Structures and Integrated Systems VIII, part of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014-03-10.

Betts, D. N., Guyer, R. A., Le Bas, P.-Y., Bowen, C. R., Inman, D. and Kim, H. A., 2014. Modelling the dynamic response of bistable composite plates for piezoelectric energy harvesting. In: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014, 2014-01-13 - 2014-01-17, Maryland.

Brampton, C. J., Bowen, C. R., Buschhorn, S. T., Lee, J., Pickering, S. G., Wardle, B. L. and Kim, H. A., 2014. Actuation of bistable laminates by conductive polymer nanocomposites for use in thermal-mechanical aerosurface de-icing systems. In: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014, 2014-01-13 - 2014-01-17, Maryland.

Brandon, D., Thomson, A., Ansell, M. P., Bregulla, J., Harris, R. and Walker, P. J., 2014. Stiffness modelling of non-metallic timber connections with pultruded dowels. In: InCIEC 2013 International Civil and Infrastructure Engineering Conference, 2013-09-22 - 2014-01-24, Kuching, Sarawak.

Dolce, F. and Meo, M., 2010. Structural response of laminated composite plates to blast load. In: 2010 Enginsoft International Conference, 2010-10-21 - 2010-10-22, Fiera Montichiari (BS).

Henderson, J.-P., Plummer, A. R., Johnston, D. N. and Bowen, C. R., 2013. The influence of passive valve characteristics on the performance of a piezo pump for hydraulic actuation. In: Bath/ASME Symposium on Power Transmission and Motion Control FPMC2013, 2013-10-08 - 2013-10-10, Sarasota.

Packham, D. E., 2012. A crisis in the environment? The impact of polymers and adhesives. In: POLYCHAR 20, World Forum on Advanced Materials, 2012-03-26 - 2012-03-30, Dubrovnik.

Sangiah, D., Plummer, A. R. and Bowen, C. R., 2012. Performance Optimization of a Two-stage Piezohydraulic Servovalve. In: 8th International Fluid Power Conference (IFK), 2012-03-26 - 2012-03-28, Dresden.

Sangiah, D., Plummer, A. R., Bowen, C. R. and Guerrier, P., 2011. A vortex valve for flow control in fluid systems. In: 12th Scandinavian conference on Fluid Power (SICFP'11), 2011-05-17 - 2011-05-20, Tampere.

Sangiah, D., Plummer, A. R., Bowen, C. R. and Guerrier, P., 2011. Modelling and experimental validation of a novel piezohydraulic servovalve. In: 2011 Dynamic Systems and Control Conference, 2011-10-31 - 2011-11-02, Arlington.

Topolov, V. Y., Bowen, C. R. and Krivoruchko, A. V., 2013. Role of domain orientations in forming the hydrostatic performance of novel 2-2 single crystal/polymer composites. In: 7th International Seminar on Ferroelastic Physics, ISFP 2012, 1970-01-01 - 2013-09-13, Voromezh.

Turner, I. G., Bowen, C. R., Baxter, F. R., Gittings, J. and Chaudhuri, J. B., 2011. The effect of poling on the in vitro response to poled HA and HABT composites for clinical applications. In: 24th European Conference on Biomaterials, EBS 2011, 2011-09-04 - 2011-09-08, Dublin.

Turner, I. G., Rupani, A., Hidalgo-Bastida, A., Patel, J., Dent, A. C. E. and Cartmell, S., 2011. Osteoblast activity on carbonated hydroxyapatite. In: 24th European Conference on Biomaterials, EBS 2011, 2011-09-04 - 2011-09-08, Dublin.

Visrolia, A., Angioni, S. L. and Meo, M., 2010. A hierarchical XFEM plate model for the simulation of composite laminates failure. In: ECCM 2010: IV European Conference on Computational Mechanics, 2010-05-16 - 2010-05-21, Palais des Congrès, Paris.

Thesis

Regonini, D., 2008. Anodised TiO2 nanotubes: synthesis, growth mechanism and thermal stability. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Patent

Graham, T., Taylor, J., Bowen, C. and Robbins, J., 2012. Biocompatible electrode. US2012091011 (A1), 19 April 2012.

Other

Almond, D., 2012. Induction Thermography for Inspection through Coatings. University of Bath.

Meo, M., 2012. Nanoreinforced Solid Fibre Laminates (NSFL) for improved impact resistant properties. University of Bath.

Taylor, J. and Bowen, C., 2012. Biocompatible CMOS Electrode Array. University of Bath.

This list was generated on Wed Oct 22 11:29:17 2014 IST.