Items from Research Centres & Institutes > Centre for Power Transmission & Motion Control

Johnston, D. N. and Plummer, A., eds., 2008. Fluid Power and Motion Control (FPMC 2008). Bath, UK: Centre for Power Transmission and Motion Control.

Abulrub, A. H., Sahinkaya, M. N. and Burrows, C., 2010. An adaptive weighting control strategy to avoid magnetic bearing contact. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. New York: ASME, pp. 741-747.

Akehurst, S., 2009. Optimizing the Design of a Milner CVT Using Simulation Based Design of Experiments. In: SAE 2009 World Congress, 2009-04-20 - 2009-04-23, Detroit, Michigan.

Barker, M., Drew, B., Darling, J., Edge, K. A. and Owen, G. W., 2010. Steady-state steering of a tilting three-wheeled vehicle. Vehicle System Dynamics, 48 (7), pp. 815-830.

Berote, J., Darling, J. and Plummer, A., 2012. Development of a tilt control method for a narrow-track three-wheeled vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 226 (1), pp. 48-69.

Berote, J., Van Poelgeest, A., Darling, J., Edge, K. A. and Plummer, A., 2008. The dynamics of a three-wheeled narrow-track tilting vehicle. In: FISITA World Automotive Congress 2008, 2008-09-14 - 2008-09-19, Munich.

Brace, C., Akehurst, S. and Plummer, A., 2012. Second Generation Hybrid System Design for Reduced CO2. University of Bath.

Brace, C. J. and Tily, R., 2011. Analysis of cyclic variability in combustion in internal combustion engines using wavelets. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (3), pp. 341-353.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2011. Piezoelectrically actuated hydraulic valve design for high bandwidth and flow performance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (3), pp. 345-359.

Branson, D., Johnston, D. N., Tilley, D., Bowen, C. and Keogh, P., 2010. Piezoelectric Actuation in a High Bandwidth Valve. Ferroelectrics, 408 (1), pp. 32-40.

Cargo, C. J., Plummer, A. R., Hillis, A. J. and Schlotter, M., 2012. Determination of optimal parameters for a hydraulic power take-off unit of a wave energy converter in regular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226 (1), pp. 98-111.

Cleasby, K. G. and Plummer, A. R., 2008. A novel high efficiency electro-hydrostatic flight simulator motion system. In: Fluid Power and Motion Control (FPMC 2008). UK: Centre for PTMC, pp. 437-449.

Drew, B., Plummer, A. and Sahinkaya, M. N., 2009. A review of wave energy converter technology. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (8), pp. 887-902.

Faulkner, J., Johnston, N. and Weber, S., 2011. Computer Modeling of a Pressure Relief Cartridge Valve. In: International Fluid Power Exposition, 2011-03-21 - 2011-03-25, Las Vegas.

Henderson, J.-P., Plummer, A. and Johnston, N., 2012. Hybrid active-passive electro-hydrostatic vibration isolation for rotorcraft. In: Recent Advances in Aerospace Actuation Systems and Components, 2012-06-13 - 2012-06-14, Toulouse.

Hillis, A. and Mullineux, G., 2012. Cost reduction and product innovation with Stock Redler. University of Bath.

Iravani, P., 2009. Multi-level network analysis of multi-agent systems. In: Iocchi, L., Matsubara, H., Weitzenfeld, A. and Zhou, C., eds. RoboCup 2008: Robot Soccer World Cup XII. Vol. 5399 LNAI. Berlin: Springer-Verlag, pp. 495-506. (Lecture Notes in Artificial Intelligence, Vol. 5399)

Iravani, P., 2008. Multi-level dynamics of a simulated agent system. In: 5th European Conference in Complex Systems ECCS08, 2008-09-14 - 2008-09-19, Jerusalem.

Iravani, P. and Sahinkaya, M. N., 2010. Variable-velocity exponential input shaping for position controlled robotic systems. In: 3rd Annual Dynamic Systems and Control Conference, 2010-09-13 - 2010-09-15, Boston, MA.

Jiang, D., Li, S., Zeng, W. and Edge, K.A., 2012. Modeling and simulation of low pressure oil-hydraulic pipeline transients. Computers and Fluids, 67, pp. 79-86.

Johnston, D. N., 2011. Numerical modelling of unsteady turbulent flow in smooth-walled pipes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225 (7), pp. 1601-1615.

Johnston, D. N. and Pan, M., 2010. Use of Pipeline Wave Propagation Model for Measuring Unsteady Flowrate. In: Fluid Power and Motion Control, 2010-09-15 - 2010-09-17, Bath.

Johnston, D. N. and Todd, C., 2010. Condition Monitoring of Aircraft Fuel Pumps using Pressure Ripple Measurements. In: Fluid Power and Motion Control, 2010-09-15 - 2010-09-17, Bath.

Johnston, D. N., 2011. Numerical modelling of unsteady turbulent flow in tubes, including the effects of roughness and large changes in Reynolds number. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225 (8), pp. 1874-1885.

Johnston, D. N., Cone, K. M. and Way, T., 2010. Measured dynamic properties of flexible hoses. Journal of Vibration and Acoustics-Transactions of the Asme, 132 (2), 021011.

Johnston, N., 2011. Noise and vibration of fluid power systems. In: Totten, G. and De Negri, V., eds. Handbook of Hydraulic Fluid Technology.2nd ed. Boca Raton, FL.: CRC Press.

Johnston, N., 2012. The transmission line method for modelling laminar flow of liquid in pipelines. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 226 (5), pp. 586-597.

Johnston, N., Kudzma, S., Plummer, A., Sell, N., Hillis, A. and Pan, M., 2012. A high flow fast switching valve for digital hydraulic systems. In: The Fifth Workshop on Digital Fluid Power, 2012-10-24 - 2012-10-25, Tampere.

Jones, R. O., Iravani, P. and Bowyer, A., 2012. Rapid Manufacturing of Functional Engineering Components. Other. Bath, UK: University of Bath.

Kojima, E., Yamazaki, T. and Edge, K., 2009. Development of standard testing procedure for experimentally determining inherent source pulsation power generated by hydraulic pump. International Journal of Fluid Power, 10 (1), pp. 27-35.

Margetts, R., Ngwompo, R. F. and Fortes da Cruz, M., 2013. Construction and analysis of causally dynamic hybrid bond graphs. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (3), pp. 329-346.

Margetts, R., Ngwompo, R. F. and Fortes da Cruz, M., 2013. Modelling a drop test of a landing gear using a hybrid bond graph. In: Klement, E. P., Borutzky, W., Fahringer, T., Hamza, M. H. and Uskov, V., eds. Proceedings of the IASTED International Conference on Modelling, Identification and Control. Anaheim: ACTA Press, pp. 312-317.

Mullineux, G. and Hillis, A., 2012. Cost reduction and product innovation for bulk handling machines. University of Bath.

Pan, M., 2012. Active Control of Pressure Pulsation in a Switched Inertance Hydraulic System. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Pan, M., Johnston, N. and Hillis, A., 2012. Active control of pressure pulsation in a switched inertance hydraulic system using a rectangular-wave reference signal. In: Bath/ASME Symposium on Fluid Power and Motion Control, 2012-09-12 - 2012-09-14, Bath.

Plummer, A., 2008. Controlling Automotive Test Rigs. In: UKACC International Conference on Control 2008, 2008-09-02 - 2008-09-04, Manchester.

Plummer, A., 2012. Piezoelectric Aero Engine Control Systems (PACS). University of Bath.

Plummer, A., 2012. Piezoelectric ceramic devices for aero engine fuel systems. University of Bath.

Plummer, A., 2010. Trends in Power Transmission and Motion Control. Journal of Japanese Fluid Power Society, 41 (1).

Plummer, A. R., 2008. A detailed dynamic model of a six-axis shaking table. Journal of Earthquake Engineering, 12 (4), pp. 631-662.

Plummer, A. R., 2010. A general co-ordinate transformation framework for multi-axis motion control with applications in the testing industry. Control Engineering Practice, 18 (6), pp. 598-607.

Plummer, A. R., 2009. Highly dynamic servohydraulic motion control. In: International Conference on Fluid Power Transmission and Control: ICFP 2009, 2009-04-07 - 2009-04-10, Hangzhou.

Plummer, A. R. and Guinzio, P. S., 2010. Modal control of an electrohydrostatic flight simulator motion system. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. Vol. B. New York: American Society of Mechanical Engineers, pp. 1257-1264.

Sahinkaya, M. N. and Plummer, A., 2009. Guest Editorial: Special Issue on dynamics and control of parallel manipulators. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 233 (1), i-ii.

Sahinkaya, M. N., Wang, P. and Akehurst, S., 2013. Causal inversion of non-minimum-phase systems for hardware-in-the-loop transmission testing. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (3), pp. 298-307.

Sangiah, D., Plummer, A. R., Bowen, C. and Guerrier, P., 2013. A novel piezohydraulic aerospace servovalve. Part I: design and modelling. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (4), pp. 371-389.

Schlotter, M., 2009. Development of course material in a multi-author environment. Australasian Journal of Educational Technology, 25 (4), pp. 459-470.

Schlotter, M. and Plummer, A. R., 2011. Learning control strategies for high-rate materials testing machines. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (8), pp. 1125-1135.

Wang, P., Kudzma, S., Johnston, N., Plummer, A. and Hillis, A., 2011. The Influence of Wave Effects on Digital Switching Valve Performance. In: The Fourth Workshop on Digital Fluid Power, 2011-09-21 - 2011-09-22, Linz.

Wang, P., Sahinkaya, M. N. and Akehurst, S., 2009. Pseudo-causal tracking control of a nonminimum phase system. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. New York: ASME, pp. 1201-1208.

Xia, F., Pan, M., Mu, S., Xiong, Y., Edler, K.J., Idini, I., Jones, M.D., Tsang, S.C. and Marken, F., 2012. Hydrothermal core-shell carbon nanoparticle films : Thinning the shell leads to dramatic pH response. Physical Chemistry Chemical Physics, 14 (45), pp. 15860-15865.

Zanetti Rocha, L., Johnston, D. N. and Gerges, S. N. Y., 2010. Flow ripple reduction in power steering hydraulic pumps. In: Fluid Power and Motion Control 2010, 2010-09-15 - 2010-09-17, Bath.