Research

Items from Research Centres & Institutes > Centre for Power Transmission & Motion Control

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | P | R | S | W | X | Y | Z
Number of items at this level: 140.

A

Abulrub, A. H., Sahinkaya, M. N. and Burrows, C., 2010. An adaptive weighting control strategy to avoid magnetic bearing contact. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. New York: ASME, pp. 741-747.

Akehurst, S., 2009. The design of a Milner CVT using simulation based design of experiments. In: SAE 2009 World Congress, 2009-04-20 - 2009-04-23, Detroit, Michigan.

B

Barker, M., Drew, B., Darling, J., Edge, K. A. and Owen, G. W., 2010. Steady-state steering of a tilting three-wheeled vehicle. Vehicle System Dynamics, 48 (7), pp. 815-830.

Berg, F. T. N., Balchin, M. J. and Keogh, P. S., 2013. New principles for dynamic aircraft exergy mapping. AIAA Journal of Aircraft, 50 (4), pp. 1088-1098.

Berote, J. J. H., Plummer, A. R. and Darling, J., 2010. Lateral dynamics optimisation of a direct tilt controlled narrow vehicle. In: 10th International Symposium on Advanced Vehicle Control (AVEC 2010), 2010-08-24 - 2010-08-27, Loughborough.

Berote, J., Darling, J. and Plummer, A., 2012. Development of a tilt control method for a narrow-track three-wheeled vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 226 (1), pp. 48-69.

Berote, J., Darling, J. and Plummer, A., 2015. Lateral dynamics simulation of a three-wheeled tilting vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229 (3), JAuto-13-0031.

Berote, J., Van Poelgeest, A., Darling, J., Edge, K. A. and Plummer, A., 2008. The dynamics of a three-wheeled narrow-track tilting vehicle. In: FISITA World Automotive Congress 2008, 2008-09-14 - 2008-09-19, Munich.

Bertin, M. J. F., Plummer, A. R., Bowen, C. R. and Johnston, D. N., 2014. An investigation of piezoelectric ring benders and their potential for actuating servo valves. In: ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014. Web Portal ASME (American Society of Mechanical Engineers), V001T01A034.

Bhatti, J., Plummer, A. R., Sahinkaya, M. N., Iravani, P., Guglielmino, E. and Caldwell, D. G., 2012. Fast and adaptive hopping height control of single-legged robot. In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, 2012-07-02 - 2012-07-04, Nantes.

Bhatti, J. and Plummer, A. R., 2011. Hydraulic running robots : The prospects for fluid power in agile locomotion. In: 12th Scandinavian conference on Fluid Power (SICFP'11), 2011-05-17 - 2011-05-20, Tampere.

Brace, C. J. and Tily, R., 2011. Analysis of cyclic variability in combustion in internal combustion engines using wavelets. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (3), pp. 341-353.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2011. Piezoelectrically actuated hydraulic valve design for high bandwidth and flow performance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (3), pp. 345-359.

Branson, D., Johnston, D. N., Tilley, D., Bowen, C. and Keogh, P., 2010. Piezoelectric Actuation in a High Bandwidth Valve. Ferroelectrics, 408 (1), pp. 32-40.

C

Cargo, C. J., Hillis, A. J. and Plummer, A. R., 2014. Optimisation and control of a hydraulic power take-off unit for a wave energy converter in irregular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 228 (4), pp. 462-479.

Cargo, C., Plummer, A. R. and Hillis, A. J., 2011. Hydraulic Power Transmission and Control for Wave Energy Converters. In: 52nd National Fluid Power Conference, 2011-03-21 - 2011-03-25, Las Vegas.

Cargo, C., Plummer, A. R., Hillis, A. J. and Schlotter, M., 2011. Optimal design of a realistic hydraulic power take-off in irregular waves. In: 9th European Wave and Tidal Energy Conference (EWTEC), 2014-09-01 - 2014-09-05, Southampton.

Cargo, C. J., Plummer, A. R., Hillis, A. J. and Schlotter, M., 2012. Determination of optimal parameters for a hydraulic power take-off unit of a wave energy converter in regular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226 (1), pp. 98-111.

Chapman, A., Hillis, A. J., Biddle, H. and Carey, J., 2007. Systems and method for dispensing an ice slush-cooled beverage. GB2436445(B), US2009077999(A1), WO2007107698(A1), EP1996883(A1), September 2007.

Chen, L., Morgan, G. C. J., Zang, J., Hillis, A. J. and Taylor, P. H., 2013. Modelling wave interactions with a surface-piercing vertical cylinder using OpenFOAM. In: The 28th International Workshop on Water Waves and Floating Bodies, 2013-04-07 - 2013-04-10.

Chen, L., Sun, L., Zang, J. and Hillis, A. J., 2014. Numerical Simulation of Wave-induced Roll of a 2-D Rectangular Barge Using OpenFOAM. In: the 29th International Workshop on Water Waves and Floating Bodies, 2014-03-30 - 2014-04-02, Osaka.

Chen, L., Zang, J., Hillis, A. J. and Plummer, A. R., 2013. Modelling of focused waves transformation and wave run-up at a beach using OpenFOAM. In: The 9th UK Young Coastal Scientists and Engineers Conference, 2013-03-25 - 2013-03-26, Aberdeen.

Cleasby, K. G. and Plummer, A. R., 2008. A novel high efficiency electro-hydrostatic flight simulator motion system. In: Fluid Power and Motion Control (FPMC 2008). UK: Centre for PTMC, pp. 437-449.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2000. Adaptive-Q control of vibration due to unknown disturbances in rotor/magnetic bearing systems. In: Proceedings of the 2000 IEEE International Conference on Control Applications. Vol. 1. Piscataway, U. S. A.: IEEE, pp. 965-970.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. The dynamic behavior of a rolling element auxiliary bearing following rotor impact. Journal of Tribology-Transactions of the Asme, 124 (2), pp. 406-413.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 1998. Vibration control of a flexible rotor/magnetic bearing system subject to direct forcing and base motion disturbances. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212 (7), pp. 535-546.

Cole, M. O. T., Wongratanaphisan, T. and Keogh, P. S., 2005. On LMI-based optimization of vibration and stability in rotor system design. In: Proceedings of the ASME Turbo Expo, 2005. New York, U. S. A.: ASME, pp. 773-781.

Cole, M.O.T., Keogh, P.S. and Burrows, C.R., 2000. Fault-tolerant control of rotor/magnetic bearing systems using reconfigurable control with built-in fault detection. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214 (12), pp. 1445-1466.

Corradi, T., Hall, P. and Iravani, P., 2014. Tactile features : recognising touch sensations with a novel and inexpensive tactile sensor. In: Mistry, M., Leonardis, A., Witkowski, M. and Melhuish, C., eds. Advances in Autonomous Robotics Systems. Springer, pp. 163-172. (Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics; 8717)

D

De Negri, V. J., Wang, P., Plummer, A. and Johnston, D. N., 2014. Behavioural prediction of hydraulic step-up switching converters. International Journal of Fluid Power, 15 (1), pp. 1-9.

Drew, B., Barker, M., Edge, K., Darling, J. and Owen, G. W., 2006. Experimental evaluation of a hydraulically actuated tilt system for a narrow track three-wheeled vehicle. In: 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, 2006-11-05 - 2006-11-10, Chicargo.

Drew, B., Plummer, A. and Sahinkaya, M. N., 2009. A review of wave energy converter technology. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (8), pp. 887-902.

Du, C., Plummer, A. R. and Johnston, D. N., 2014. Variable pressure valve-controlled hydraulic actuation for a robotic arm. In: Proceedings of the 9th International Fluid Power Conference. .

Du, Z., Iravani, P. and Sahinkaya, M. N., 2014. A new approach to design optimal excitation trajectories for parameter estimation of robot dynamics. In: 2014 UKACC International Conference on Control (CONTROL), 2014-07-09 - 2014-07-11, Loughborough, UK.

E

Eamcharoenying, P., Hillis, A. and Darling, J., 2014. Friction compensation for a force controlled electric actuator with unknown sinusoidal disturbance motion. In: 2014 UKACC International Conference on Control, CONTROL 2014 - Proceedings. IEEE, pp. 331-336.

Evans, M., Akehurst, S. and Keogh, P., 2014. Wear mechanisms in polyoxymethylene (POM) spur gears. In: 5th World Tribology Congress, WTC 2013, 2013-09-08 - 2013-09-13, Torino.

F

Faulkner, J., Johnston, N. and Weber, S., 2011. Computer Modeling of a Pressure Relief Cartridge Valve. In: International Fluid Power Exposition, 2011-03-21 - 2011-03-25, Las Vegas.

G

Ginzinger, L., Sahinkaya, M. N., Schindler, T., Ulbrich, H. and Keogh, P., 2014. Model-based condition monitoring of an auxiliary bearing following contact events. In: 10th International Conference on Motion and Vibration Control, MOVIC 2010, 2010-08-17 - 2010-08-20, Tokyo.

H

Henderson, J.-P., Plummer, A. R., Johnston, D. N. and Bowen, C. R., 2013. The influence of passive valve characteristics on the performance of a piezo pump for hydraulic actuation. In: Bath/ASME Symposium on Power Transmission and Motion Control FPMC2013, 2013-10-08 - 2013-10-10, Sarasota.

Henderson, J.-P., Plummer, A. and Johnston, N., 2012. Hybrid active-passive electro-hydrostatic vibration isolation for rotorcraft. In: Recent Advances in Aerospace Actuation Systems and Components, 2012-06-13 - 2012-06-14, Toulouse.

Hockings, N., Iravani, P. and Bowen, C., 2014. Artificial ligamentous joints : Methods, materials and characteristics. In: IEEE-RAS International Conference on Humanoid Robots, 2014-11-18 - 2014-11-20, Madrid. Item availability may be restricted.

Hultin, A., Tryfonas, T., Johnston, N. and Kirkman, M., 2014. Modelling effective product development systems as network-of-networks. In: Proceedings of the 8th Annual IEEE International Systems Conference, SysCon 2014. , pp. 89-96.

I

Iravani, P., 2009. Multi-level network analysis of multi-agent systems. In: Iocchi, L., Matsubara, H., Weitzenfeld, A. and Zhou, C., eds. RoboCup 2008: Robot Soccer World Cup XII. Vol. 5399 LNAI. Berlin: Springer, pp. 495-506. (Lecture Notes in Artificial Intelligence, Vol. 5399)

Iravani, P., 2008. Multi-level dynamics of a simulated agent system. In: 5th European Conference in Complex Systems ECCS08, 2008-09-14 - 2008-09-19, Jerusalem.

Iravani, P. and Sahinkaya, M. N., 2010. Variable-velocity exponential input shaping for position controlled robotic systems. In: 3rd Annual Dynamic Systems and Control Conference, 2010-09-13 - 2010-09-15, Boston, MA.

J

Jiang, D., Li, S., Zeng, W. and Edge, K.A., 2012. Modeling and simulation of low pressure oil-hydraulic pipeline transients. Computers and Fluids, 67, pp. 79-86.

Johnston, D. N., 2011. Numerical modelling of unsteady turbulent flow in smooth-walled pipes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225 (7), pp. 1601-1615.

Johnston, D. N. and Pan, M., 2010. Use of Pipeline Wave Propagation Model for Measuring Unsteady Flowrate. In: Fluid Power and Motion Control, 2010-09-15 - 2010-09-17, Bath.

Johnston, D. N. and Todd, C., 2010. Condition Monitoring of Aircraft Fuel Pumps using Pressure Ripple Measurements. In: Fluid Power and Motion Control, 2010-09-15 - 2010-09-17, Bath.

Johnston, D. N., 2011. Numerical modelling of unsteady turbulent flow in tubes, including the effects of roughness and large changes in Reynolds number. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225 (8), pp. 1874-1885.

Johnston, D. N., Way, T. and Cone, K. M., 2010. Measured dynamic properties of flexible hoses. Journal of Vibration and Acoustics-Transactions of the Asme, 132 (2), 021011.

Johnston, N., 2011. Noise and vibration of fluid power systems. In: Totten, G. and De Negri, V., eds. Handbook of Hydraulic Fluid Technology.2nd ed. Boca Raton, FL.: CRC Press.

Johnston, N., 2012. The transmission line method for modelling laminar flow of liquid in pipelines. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 226 (5), pp. 586-597.

Johnston, N., Kudzma, S., Plummer, A., Sell, N., Hillis, A. and Pan, M., 2012. A high flow fast switching valve for digital hydraulic systems. In: The Fifth Workshop on Digital Fluid Power, 2012-10-24 - 2012-10-25, Tampere.

Johnston, N., Pan, M., Plummer, A., Hillis, A. and Yang, H., 2015. Theoretical Studies of a Switched Inertance Hydraulic System in a Four-Port Valve Configuration. In: The Seventh Workshop on Digital Fluid Power, 2015-02-26 - 2015-02-27, Linz.

Johnston, N., Pan, M. and Kudzma, S., 2014. An enhanced transmission line method for modelling laminar flow of liquid in pipelines. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 228 (4), pp. 193-206.

Johnston, N., Pan, M., Kudzma, S. and Wang, P., 2014. Use of pipeline wave propagation model for measuring unsteady flow rate. Journal of Fluids Engineering - Transactions of the ASME, 136 (3), 031203.

Joiner, R., Darling, J., Drew, B. and Huang, Y., 2012. Digital game based learning for supporting engineering learning in 3 different universities. In: 1st STEM Annual Conference, Imperial College, 2012-04-12 - 2012-04-13.

Jones, R. O., Iravani, P. and Bowyer, A., 2012. Rapid Manufacturing of Functional Engineering Components. Other. Bath, UK: University of Bath.

K

Keogh, P. S. and Cole, M. O., 2004. Contact dynamic response with misalignment in a flexible rotor/magnetic bearing system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 128 (2), pp. 362-369.

Keogh, P. S. and Morton, P. G., 1994. The dynamic nature of rotor thermal bending due to unsteady lubricant shearing within a bearing. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 445 (1924), pp. 273-290.

Keogh, P. S., Seow, Y. H. and Cole, M. O. T., 2005. Characteristics of a magnetically levitated flexible rotor when in contact with one or more auxiliary bearings. In: Proceedings of the ASME Turbo Expo, 2005. New York, U. S. A.: ASME, pp. 791-799.

Keogh, P. S. and Cole, M. O. T., 2004. Contact dynamic response with misalignment in a flexible rotor/magnetic bearing system. In: Proceedings of the ASME Turbo Expo, 2004. Vol. 6. U. S. A.: ASME, pp. 715-723.

Kojima, E., Yamazaki, T. and Edge, K., 2009. Development of standard testing procedure for experimentally determining inherent source pulsation power generated by hydraulic pump. International Journal of Fluid Power, 10 (1), pp. 27-35.

L

Lamming, C., Plummer, A. R. and Hillis, A. J., 2010. Analysis of Robust Electrohydraulic Force Control. In: 7th International Fluid Power Conference (IFK), 2010-03-22 - 2010-03-24, Aachen.

Lamming, C., Plummer, A. R. and Hillis, A. J., 2011. Controller Synthesis in Electrohydraulic Force Control. In: 12th Scandinavian conference on Fluid Power (SICFP'11), 2011-05-17 - 2011-05-20, Tampere.

Leonard, L., Sirkett, D. M., Langdon, I. J., Mullineux, G., Tilley, D. G., Keogh, P. S., Cunningham, J. L., Cole, M. O. T., Prest, P. H., Miles, A. W. and Giddins, G. E. B., 2002. Engineering a new wrist joint replacement prosthesis - A multidisciplinary approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (9), pp. 1297-1302.

Li, P., Sahinkaya, M. N. and Keogh, P. S., 2012. Active recovery of contact-free levitation in magnetic bearing systems. In: ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012, 2012-08-12 - 2012-08-12, Chicago, IL.

Livingston, M. and Plummer, A. R., 2010. The Design, Simulation and Control of a Wave Energy Converter Power Take Off. In: 7th International Fluid Power Conference (IFK), 2010-03-22 - 2010-03-24, Aachen.

M

Margetts, R., Ngwompo, R. F. and Fortes da Cruz, M., 2013. Construction and analysis of causally dynamic hybrid bond graphs. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (3), pp. 329-346.

Margetts, R. and Ngwompo, R. F., 2010. Comparison of modeling techniques for a landing gear. Proceedings of the ASME International Mechanical Engineering Congress & Exposition IMECE, 2010, 8 (Part A & B), pp. 329-335.

Margetts, R., Ngwompo, R. F. and Fortes da Cruz, M., 2013. Modelling a drop test of a landing gear using a hybrid bond graph. In: Klement, E. P., Borutzky, W., Fahringer, T., Hamza, M. H. and Uskov, V., eds. Proceedings of the IASTED International Conference on Modelling, Identification and Control. Anaheim: ACTA Press, pp. 312-317.

Muelaner, J., Knight, T. and Darling, J., 2015. Kinematic Analysis and Optimization of Bicycle Suspension. In: Second International Conference on Sustainable Design and Manufacturing, 2015-04-12 - 2015-04-14, Seville.

P

Pan, M., Johnston, D. N., Plummer, A. R., Kudzma, S. and Hillis, A. J., 2014. Theoretical and experimental studies of a switched inertance hydraulic system including switching transition dynamics, non-linearity and leakage. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 228 (1), pp. 12-25.

Pan, M., 2012. Active Control of Pressure Pulsation in a Switched Inertance Hydraulic System. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Pan, M., Hillis, A. and Johnston, N., 2014. Active control of fluid-bome noise in hydraulic systems using in-series and by-pass structures. In: 2014 UKACC International Conference on Control, CONTROL 2014 - Proceedings. IEEE, pp. 355-360.

Pan, M., Johnston, D. N., Plummer, A., Kudzma, S. and Hillis, A., 2013. Active control of pressure pulsation in a piping system using measured dynamic flow rate. In: Proceedings of the ASME/BATH Symposium on Fluid Power and Motion Control, 2013. New York, U. S. A.: ASME, V001T01A001-1 - V001T01A059-7 :.

Pan, M., Johnston, N. and Hillis, A., 2013. Active control of pressure pulsation in a switched inertance hydraulic system. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (7), pp. 610-620.

Pan, M., Johnston, N. and Hillis, A., 2012. Active control of pressure pulsation in a switched inertance hydraulic system using a rectangular-wave reference signal. In: Bath/ASME Symposium on Fluid Power and Motion Control, 2012-09-12 - 2012-09-14, Bath.

Pan, M., Robertson, J., Johnston, N., Plummer, A. and Hillis, A., 2014. Experimental investigation of a switched inertance hydraulic system. In: Bath/ASME Symposium on Fluid Power and Motion Control FPMC, 2014. ASME, V001T01A020.

Plummer, A. R., 2010. Control of wave energy converter power transmissions. In: Control2010 (IMechE Minisymposium), 2010-09-06 - 2010-09-08, Coventry.

Plummer, A. R., 2011. High bandwidth motion control for seismic testing tables. In: 4th Symposium on Advances in Experimental Structural Dynamics / European Commission EFAST Workshop, 2011-06-28 - 2011-06-30, Ispra.

Plummer, A. R., 2013. Practical multivariable control for multi-axis hydraulic servosystems. In: International Conference on Fluid Power Transmission and Control, 2013-04-09 - 2013-04-11, Hangzhou.

Plummer, A. R. and Cargo, C., 2012. Power Transmissions for Wave Energy Converters: A Review. In: 8th International Fluid Power Conference (IFK), 2012-03-26 - 2012-03-28, Dresden.

Plummer, A. R. and Schlotter, M., 2009. Investigating the Performance of a Hydraulic Power Take-Off. In: 8th European Wave and Tidal Energy Conference (EWTEC2009), 2009-09-07 - 2009-09-10, Uppsala.

Plummer, A., 2008. Controlling Automotive Test Rigs. In: UKACC International Conference on Control 2008, 2008-09-02 - 2008-09-04, Manchester.

Plummer, A., 2010. Trends in Power Transmission and Motion Control. Journal of Japanese Fluid Power Society, 41 (1).

Plummer, A. R., 2008. A detailed dynamic model of a six-axis shaking table. Journal of Earthquake Engineering, 12 (4), pp. 631-662.

Plummer, A. R., 2009. Highly dynamic servohydraulic motion control. In: International Conference on Fluid Power Transmission and Control: ICFP 2009, 2009-04-07 - 2009-04-10, Hangzhou.

Plummer, A. R. and Guinzio, P. S., 2010. Modal control of an electrohydrostatic flight simulator motion system. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. Vol. B. New York: American Society of Mechanical Engineers, pp. 1257-1264.

R

Roberts, A., Schlotter, M., Plummer, A. R. and Tilley, D. G., 2010. CFX/Simulink co-simulation of a wave energy converter. In: Bath/ASME Conference of Fluid Power and Motion Control (FPMC2010), 2010-09-15 - 2010-09-17, Bath.

Robertson, J., Darling, J. and Plummer, A. R., 2014. Combined steering and direct tilt control for the enhancement of narrow tilting vehicle stability. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 228 (8), 0954407014522445.

Robertson, J. W., Darling, J. and Plummer, A. R., 2012. Path following performance of narrow tilting vehicles equipped with active steering. In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, 2012-07-02 - 2012-07-04, Nantes.

Rymansaib, Z., Iravani, P. and Sahinkaya, M. N., 2013. Exponential trajectory generation for point to point motions. In: 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013. Piscataway, NJ: IEEE, pp. 906-911.

S

Sahinkaya, M. N. and Plummer, A., 2009. Guest Editorial: Special Issue on dynamics and control of parallel manipulators. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 233 (1), i-ii.

Sahinkaya, M. N., Wang, P. and Akehurst, S., 2013. Causal inversion of non-minimum-phase systems for hardware-in-the-loop transmission testing. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (3), pp. 298-307.

Sahinkaya, M. N., Cole, M. O. T. and Burrows, C. R., 2001. Fault detection and tolerance in synchronous vibration control of rotor-magnetic bearing systems. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (12), pp. 1401-1416.

Sahinkaya, M. N. and Liu, Y., 2005. Motion planning and control of parallel mechanisms through inverse dynamics. In: IUTAM Symposium on Vibration Control od Nonlinear Mechanisms and Structures, Proceedings,, 2005-07-01, Munich.

Saket, F. Y., Sahinkaya, M. N. and Keogh, P. S., 2013. Touchdown bearing contact forces in magnetic bearing systems. In: Proceedings of the ASME Turbo Expo. Vol. 7 A. San Antonio, U. S. A.: ASME, V07AT29A021.

Sangiah, D., Plummer, A. R. and Bowen, C. R., 2012. Performance Optimization of a Two-stage Piezohydraulic Servovalve. In: 8th International Fluid Power Conference (IFK), 2012-03-26 - 2012-03-28, Dresden.

Sangiah, D., Plummer, A. R., Bowen, C. R. and Guerrier, P., 2011. A vortex valve for flow control in fluid systems. In: 12th Scandinavian conference on Fluid Power (SICFP'11), 2011-05-17 - 2011-05-20, Tampere.

Sangiah, D., Plummer, A. R., Bowen, C. R. and Guerrier, P., 2011. Modelling and experimental validation of a novel piezohydraulic servovalve. In: 2011 Dynamic Systems and Control Conference, 2011-10-31 - 2011-11-02, Arlington.

Sangiah, D., Plummer, A. R., Bowen, C. and Guerrier, P., 2013. A novel piezohydraulic aerospace servovalve. Part I : Design and modelling. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (4), pp. 371-389.

Schlotter, M., 2009. Development of course material in a multi-author environment. Australasian Journal of Educational Technology, 25 (4), pp. 459-470.

Schlotter, M. and Plummer, A. R., 2011. Learning control strategies for high-rate materials testing machines. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (8), pp. 1125-1135.

Scopesi, M., Plummer, A. R. and Du, C., 2011. Energy Efficient Variable Pressure Valve-Controlled Hydraulic Actuation. In: 2011 Dynamic Systems and Control Conference, 2011-10-31 - 2011-11-02, Arlington.

Sell, N., Johnston, N. and Plummer, A., 2013. Control of a fast switching valve for digital hydraulics. In: Scandinavian International Conference on Fluid Power 2013, 2013-06-03 - 2013-06-05, Linköping.

Stringer, R., Zang, J. and Hillis, A. J., 2013. Numerical modelling of a laboratory scale tidal turbine. In: 2nd Oxford Tidal Energy Workshop (OTE 2013), 2013-03-18 - 2013-03-19, Oxford.

Stringer, R., Zang, J. and Hillis, A. J., 2013. Prediction of Lab Scale Cross-Flow Tidal Turbine Performance Using Unsteady RANS. In: The 10th European Wave and Tidal Energy Conference, 2013-09-02 - 2013-09-05, Aalborg.

W

Wang, M., Sahinkaya, M. N. and Keogh, P. S., 2013. Switching action in rotor-AMB systems for smooth vibration control. In: Proceedings of the ASME Turbo Expo. Vol. 7 A. San Antonio, U. S. A.: ASME, V07AT29A020.

Wang, P., Kudzma, S., Johnston, N., Plummer, A. and Hillis, A., 2011. The Influence of Wave Effects on Digital Switching Valve Performance. In: The Fourth Workshop on Digital Fluid Power, 2011-09-21 - 2011-09-22, Linz.

Wang, P., Sahinkaya, M. N. and Akehurst, S., 2009. Pseudo-causal tracking control of a nonminimum phase system. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. New York: ASME, pp. 1201-1208.

Williams, D., Plummer, A. R. and Wilson, P., 2013. Fault Detection of a Linear Friction Welding Production System Using an Analytical Model. In: the Eighth International Conference on Systems (ICONS’13, 2013-01-27 - 2013-02-01, Seville.

X

Xia, F., Pan, M., Mu, S., Xiong, Y., Edler, K.J., Idini, I., Jones, M.D., Tsang, S.C. and Marken, F., 2012. Hydrothermal core-shell carbon nanoparticle films : Thinning the shell leads to dramatic pH response. Physical Chemistry Chemical Physics, 14 (45), pp. 15860-15865.

Xu, Y., Johnston, D.N., Jiao, Z. and Plummer, A.R., 2014. Frequency modelling and solution of fluid-structure interaction in complex pipelines. Journal of Sound and Vibration, 333 (10), pp. 2800-2822.

Xu, Y., Nigel Johnston, D., Jiao, Z. and Plummer, A.R., 2014. Erratum : Frequency modelling and solution of fluid-structure interaction in complex pipelines. Journal of Sound and Vibration, 333 (15), p. 3583.

Y

Yang, J., Plummer, A. and Xue, Y., 2014. Dynamic friction modelling without drift and its application in the simulation of a valve controlled hydraulic cylinder system. Journal of Advanced Mechanical Design, Systems and Manufacturing, 8 (6).

Z

Zanetti Rocha, L., Johnston, D. N. and Gerges, S. N. Y., 2010. Flow ripple reduction in power steering hydraulic pumps. In: Fluid Power and Motion Control 2010, 2010-09-15 - 2010-09-17, Bath.

Zanetti-Rocha, L., Gerges, S.N.Y., Johnston, D.N. and Arenas, J.P., 2013. Rotating group design for vane pump flow ripple reduction. International Journal of Acoustics and Vibrations, 18 (4), pp. 192-200.

This list was generated on Sun May 24 15:06:45 2015 IST.