Items from Faculty of Engineering & Design > Chemical Engineering
 | Up a level |
- Faculties and Schools (42945)
- Faculty of Engineering & Design (11161)
- Chemical Engineering (1213)
- Faculty of Engineering & Design (11161)
- Research Centres & Institutes (10171)
Number of items at this level: 1213.
2017
Expósito,, A. J., Patterson, D. A., Monteagudo, J. M. and Durán, A., 2017. Sono-photo-degradation of Carbamazepine in a thin falling film reactor:operation costs in pilot plant. Ultrasonics Sonochemistry, 34, pp. 496-503.
2016
Abeln, F., Arnot, T. and Coma, M., 2016. Chemicals Recovery from Food Waste. In: ChemEngDayUK 2016, 2016-03-31 - 2016-04-01, University of Bath.
Alves, D., Pérez Esteban, P., Kot, W., Bean, J., Arnot, T., Hansen, L., Enright, M. and Jenkins, A., 2016. A novel bacteriophage cocktail reduces and disperses Pseudomonas aeruginosa biofilms under static and flow conditions. Microbial Biotechnology, 9 (1), pp. 61-74.
Bechervaise, P., Carr, D. and Bird, M. R., 2016. Removal of thermophilic spores from gum Arabic streams using ceramic alumina microfiltration membranes. Food and Bioproducts Processing, 99, pp. 147-155. Item availability may be restricted.
Bennett, N., Seddon, A. M., Hallett, J. E., Kockelmann, W., Ting, V. P., Sadasivan, S., Tooze, R. P. and Hall, S. R., 2016. Mesoporous tertiary oxides via a novel amphiphilic approach. APL Materials, 4 (1), 015701.
Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. and Mays, T. J., 2016. Corrigendum to "High-pressure adsorptive storage of hydrogen in MIL-101 (Cr) and AX-21 for mobile applications:Cryocharging and cryokinetics" [Mater & Des 89 (2016) 1086-1094] DOI: 10.1016/j.matdes.2015.10.069. Materials & Design, 91, p. 440.
Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. and Mays, T. J., 2016. High-pressure adsorptive storage of hydrogen in MIL-101 (Cr) and AX-21 for mobile applications:cryocharging and cryokinetics. Materials & Design, 89, pp. 1086-1094. Item availability may be restricted.
Bowen, C., Ting, V., Sui, T. and Korsunsky, A. M., 2016. Editorial - Virtual special issue on materials for energy efficient transport. Materials & Design, 97, p. 444.
Campbell, C. S. J., Delgado-Charro, M. B., Camus, O. and Perera, S., 2016. Comparison of drug release from poly(lactide-co-glycolide) microspheres and novel fibre formulations. Journal of Biomaterials Applications, 30 (8), pp. 1142-1153.
Chouler, J., Padgett, G. A., Cameron, P. J., Preuss, K., Titirici, M.-M., Ieropoulos, I. and Di Lorenzo, M., 2016. Towards effective small scale microbial fuel cells for energy generation from urine. Electrochimica Acta, 192, pp. 89-98.
Chuck, C., Raikova, S., Smith-Baedorf, H., Santomauro, F. and Wagner, J., 2016. Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage. Fuel Processing Technology, 142, pp. 219-227. Item availability may be restricted.
Coombs O'Brien, J., Scott, J., Mattia, D., Torrente Murciano, L. and Murray, P., 2016. Membrane Emulsification for the Continuous Production of Cellulose Beads. In: Chemistry Postgraduate Symposium 2015, 2015-05-13 - 2015-05-14, University of Bath.
Coombs O'Brien, J., Scott, J., Murray, P., Mattia, D. and Torrente Murciano, L., 2016. Processing of Cellulose-Ionic Liquid Solutions to Produce Beads with Specific and Controllable Properties. In: 6th International Conference on Ionic Liquid (COIL-6), 2008-06-16 - 2015-06-20, South Korea.
Da Ros, S., Jones, M., Mattia, D., Clarke, T., Kondrat, S., Tayloar, S., Pinto, J., Schwaab, M. and Noronha, F., 2016. Ethanol to 1,3-butadiene conversion using ZrZn-containing MgO-SiO2 systems prepared by co-precipitation and effect of catalyst acidity modification. ChemCatChem, 8 (14), pp. 2376-2386. Item availability may be restricted.
Davey, C., Havill, A., Leak, D. and Patterson, D., 2016. Nanofiltration and reverse osmosis membranes for purification and concentration of a 2,3-butanediol producing gas fermentation broth. Journal of Membrane Science, 518, pp. 150-158. Item availability may be restricted.
Di Lorenzo, M., 2016. Miniature enzymatic fuel cells for self powered healthcare sensors. In: Biosensors 2016, 2016-05-25 - 2016-05-27.
Dominguez-Ramos, A., Triantafyllidis, C., Samsatli, S., Shah, N. and Irabien, A., 2016. Renewable electricity integration at a regional level:Cantabria case study. Computer Aided Chemical Engineering, 38, pp. 211-216. Item availability may be restricted.
Donnelly, J., Horton, R., Gopalan, K., Bannister, C. D. and Chuck, C. J., 2016. Branched ketone biofuels as blending agents for Jet-A1 aviation kerosene. Energy & Fuels, 30 (1), pp. 294-301. Item availability may be restricted.
Du Toit, H., 2016. Development of miniature enzymatic biofuel cells as potential power sources for implantable medical devices. Rejuvenation Research, 19 (3), pp. 256-257.
Du Toit, H., Rashidi, R. B., Ferdani, D. W., Delgado-Charro, M. B., Sangan, C. M. and Di Lorenzo, M., 2016. Generating power from transdermal extracts using a multi-electrode miniature enzymatic fuel cell. Biosensors and Bioelectronics, 78, pp. 411-417.
D’elia, E., Eslava, S., Miranda, M., Georgiou, T. K. and Saiz, E., 2016. Autonomous self-healing structural composites with bio-inspired design. Scientific Reports, 6, 25059.
Eslava, S., 2016. Inside Front Cover, J. Mater. Chem. A, 2016,4, 7076-7076.Vol. 4(19). Royal Society of Chemistry.
Eslava, S., Reynal, A., Rocha, V. G., Barg, S. and Saiz, E., 2016. Using graphene oxide as a sacrificial support of polyoxotitanium clusters to replicate its two-dimensionality on pure titania photocatalysts. Journal of Materials Chemistry A, 4 (19), pp. 7200-7206.
Hart, A., Omajali, J. B., Murray, A. J., MacAskie, L. E., Greaves, M. and Wood, J., 2016. Comparison of the effects of dispersed noble metal (Pd) biomass supported catalysts with typical hydrogenation (Pd/C, Pd/Al2O3) and hydrotreatment catalysts (CoMo/Al2O3) for in-situ heavy oil upgrading with Toe-to-Heel Air Injection (THAI). Fuel, 180, pp. 367-376.
Herdes, C., Forte, E., Jackson, G. and Muller, E., 2016. Predicting the adsorption of n-perfluorohexane in BAM P109 standard activated carbon by molecular simulation using SAFT-gamma Mie coarse-grained force fields. Adsorption Science & Technology, 34 (1), pp. 64-78.
Hobday, C. L., Marshall, R. J., Murphie, C. F., Sotelo, J., Richards, T., Allan, D. R., Duren, T., Coudert, F.-X., Forgan, R. S., Morrison, C. A., Moggach, S. A. and Bennett, T. D., 2016. A computational and experimental approach linking disorder, high-pressure behavior, and mechanical properties in UiO frameworks. Angewandte Chemie-International Edition, 55 (7), pp. 2401-2405. Item availability may be restricted.
Hofman, J., 2016. We keep flushing valuable thermal energy down the drain. The Conversation
Hofman, J., Arnot, T. and Lanham, A., 2016. A vision of water in a circular economy. AWE International
Huang, P., Zeidler, A., Chang, W.-S., Ansell, M. P., Chew, Y. M. J. and Shea, A., 2016. Forthcoming. Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry. Construction and Building Materials,, 125, pp. 821-831.
Jenkins, R. W., Moore, C. M., Semelsberger, T. A., Chuck, C. J., Gordon, J. C. and Sutton, A. D., 2016. The effect of functional groups in bio-derived fuel candidates. ChemSusChem, 9 (9), pp. 922-931.
Kolaczkowski, S., Awdry, S., Smith, T., Thomas, D., Torkuhl, L. and Kolvenbach, R., 2016. Potential for metal foams to act as structured catalyst supports in fixed-bed reactors. Catalysis Today
Leak, D., Davey, C. and Patterson, D., 2016. Hybrid and mixed matrix membranes for separations from fermentations. Membranes, 6 (1), 17.
Lennox, M. J. and Düren, T., 2016. Understanding the Kinetic and Thermodynamic Origins of Xylene Separation in UiO-66(Zr) via Molecular Simulation. Journal of Physical Chemistry C, 120 (33), pp. 18651-18658. Item availability may be restricted.
Leong, S., Low, Z.-X., Liu, Q., Hapgood, K., Zhang, X. and Wang, H., 2016. Preparation of supported photocatalytic membrane from mesoporous titania spheres for humic acid removal from wastewater:photocatalytic Membrane. Asia-Pacific Journal of Chemical Engineering
Leung Pah Hang, M. Y., Martinez-Hernandez, E., Leach, M. and Yang, A., 2016. Designing integrated local production systems:a study on the food-energy-water nexus. Journal of Cleaner Production, 135, pp. 1065-1084. Item availability may be restricted.
Leung Pah Hang, M. Y., Martinez-Hernandez, E., Leach, M. and Yang, A., 2016. Towards a coherent multi-level framework for resource accounting. Journal of Cleaner Production, 125, pp. 204-215.
Lewis, W. J. T., Agg, A., Clarke, A., Mattsson, T., Chew, Y. M. J. and Bird, M. R., 2016. Development of an automated, advanced fluid dynamic gauge for cake fouling studies in cross-flow filtrations. Sensors and Actuators A-Physical, 238, pp. 282-296.
Li, D., Hu, J., Low, Z.-X., Zhong, Z. and Wang, Y., 2016. Hydrophilic ePTFE Membranes with highly enhanced water permeability and improved efficiency for multipollutant control. Industrial & Engineering Chemistry Research, 55 (10), pp. 2806-2812.
Liu, Q., Xu, M., Low, Z. X., Zhang, W., Tao, F., Liu, F. and Liu, N., 2016. Controlled synthesis of pyrochlore Pr2Sn2O7 nanospheres with enhanced gas sensing performance. RSC Advances, 6 (26), pp. 21564-21570.
Maltby, R., Lewis, W., Wright, S., Smith, A. and Chew, Y.-M., 2016. Multiphase CFD modelling of single-use-technology bioreactors for industrial biotechnology applications. In: 3rd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT '16), 2016-05-02 - 2016-05-03.
Manning, H., Chong, T. H., Carr, D. and Bird, M. R., 2016. Critical flux of Gum Arabic:implications for fouling and fractionation performance of membranes. Food and Bioproducts Processing, 97, pp. 41-47. Item availability may be restricted.
Maraccini, P., Wenk, J. and Boehm, A. B., 2016. Exogenous indirect photoinactivation of bacterial pathogens and indicators in water with natural and synthetic photosensitizers in simulated sunlight with reduced UVB. Journal of Applied Microbiology, 121 (2), pp. 587-597. Item availability may be restricted.
Maraccini, P., Wenk, J. and Boehm, A. B., 2016. Photoinactivation of Eight Health-Relevant Bacterial Species: Determining the Importance of the Exogenous Indirect Mechanism. Environmental Science & Technology, 50 (10), 5050–5059. Item availability may be restricted.
Mattia, D., Leese, H. and Calabrò, F., 2016. Electro-osmotic flow enhancement in carbon nanotube membranes. Proceedings of the Royal Society A: Mathematical Physical and Engineering Sciences, 374 (2060), 20150268. Item availability may be restricted.
Mattsson, T., Lewis, W., Chew, Y.-M. and Bird, M., 2016. Investigation of the formation and cohesive strength of cake fouling layers during cross-flow microfiltration using fluid dynamic gauging. In: 12th World Filtration Congress (WFC 12), 2016, 2016-04-11 - 2016-04-15.
Miles, D., 2016. Anodized ZnO Nanostructures for Next-Generation Photovoltaics. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Naeem, A., Ting, V. P., Hintermair, U., Tian, M., Telford, R., Halim, S., Nowell, H., Hołyńska, M., Teat, S. J., Scowen, I. J. and Nayak, S., 2016. Mixed-linker approach in designing porous zirconium-based metal-organic frameworks with high hydrogen storage capacity. Chemical Communications, 52 (50), pp. 7826-7829.
Ng, K. S. and Martinez Hernandez, E., 2016. A systematic framework for energetic, environmental and economic (3E) assessment and design of polygeneration systems. Chemical Engineering Research & Design, 106, pp. 1-25.
Noguera-Díaz, A., Bimbo, N., Holyfield, L. T., Ahmet, I., Ting, V. P. and Mays, T. J., 2016. Structure-property relationships in metal-organic frameworks for hydrogen storage. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 496, pp. 77-85.
Noorisafa, F., Razmjou, A., Emami, N., Low, Z. X., Korayem, A. H. and Kajani, A. A., 2016. Surface modification of polyurethane via creating a biocompatible superhydrophilic nanostructured layer:role of surface chemistry and structure. Journal of Experimental Nanoscience
Olowojoba, G. B., Eslava, S., Gutierrez, E. S., Kinloch, A. J., Mattevi, C., Rocha, V. G. and Taylor, A. C., 2016. In situ thermally reduced graphene oxide/epoxy composites:thermal and mechanical properties. Applied Nanoscience
Owen, R., Plucinski, P., Mattia, D., Torrente-Murciano, L., Ting, V. and Jones, M., 2016. Studies into the effect of catalyst support on Co-Mo-Na systems for the conversion of carbon dioxide to hydrocarbons. Journal of CO2 Utilization Item availability may be restricted.
Owen, R. E., Plucinski, P., Mattia, D., Torrente-Murciano, L., Ting, V. P. and Jones, M., 2016. Forthcoming. Effect of support of Co-Na-Mo catalysts on the direct conversion of CO2 to hydrocarbons. Journal of CO2 Utilization, 16, pp. 97-103.
Parker, H. J., Chuck, C. J., Woodman, T. and Jones, M. D., 2016. Degradation of a β-O-4 model lignin species by vanadium Schiff-base catalysts:influence of catalyst structure and reaction conditions on activity and selectivity. Catalysis Today, 269, pp. 40-47. Item availability may be restricted.
Pengilley, C., 2016. Membranes for Gas Seaparation. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Perera, S., Alsharif, A. and Chew, Y.-M., 2016. CFD Simulation of n-butane/Carbon Dioxide Separation from Air Using Composite Hollow Fibre Membranes. In: IChemE Fluid Separations, Emerging and Hybrid Membrane Technologies, 10 June 2016, Swansea, UK., 2016-06-10 - 2016-06-10.
Perera, S., Chew, J., Alsharif, A. and Lukyanov, D., 2016. The influence of bore fluid concentration on porous structure in a 13X zeolite adsorbent hollow fibre for gas separation. In: Saudi conference 14-15th February 2016, Scientific Society for Saudi Arabia (organized by the University of Birmingham in the UK), 2016-02-14 - 2016-02-15, Saudi conference 14-15th February, 2016, Scientific Society for Saudi Arabia (organized by the University of Birmingham in the UK.
Perez Esteban, P., 2016. Engineering A Skin Capillary-Bed Model for Transdermal Health Risk Assessment. In: ChemEngDayUK 2016, 2016-03-31 - 2016-04-01, University of Bath.
Perez Esteban, P., 2016. Engineering a skin capillary-bed model for transdermal health risk assessment. In: SET for Britain 2016, 2016-03-07 - 2016-03-07, Portcullis House.
Perez Esteban, P., Jenkins, A. T. A. and Arnot, T. C., 2016. Elucidation of the mechanisms of action of Bacteriophage K / nano-emulsion formulations against S. aureus via measurement of particle size and zeta potential. Colloids and Surfaces B: Biointerfaces, 139, pp. 87-94.
Perez Esteban, P., Pendlington, R., Pickles, J., Sanders, D., Scott, A. and Ellis, M., 2016. Engineering a Skin Capillary-Bed Model for Transdermal Delivery Data for use in Risk Assessment. In: Perspectives in Percutaneous Penetration, 2016-03-30 - 2016-04-01.
Perez Esteban, P., Pendlington, R., Pickles, J., Sanders, D., Scott, A. and Ellis, M., 2016. Engineering a Skin Capillary-Bed Model for Transdermal Delivery Data for use in Risk Assessment. In: ChemEngDayUK 2016, 2016-03-31 - 2016-04-01, University of Bath.
Physick, A. J. W., Wales, D. J., Owens, S. H. R., Shang, J., Webley, P. A., Mays, T. J. and Ting, V. P., 2016. Novel low energy hydrogen-deuterium isotope breakthrough separation using a trapdoor zeolite. Chemical Engineering Journal, 288, pp. 161-168.
Piers de Raveschoot, R., Schosger, J.-P., Lanham, A., Gawlick, B., Tavazzi, S., Henry, P. and Kougoulis, J., 2016. Guidelines on assessing the environmental added value of an environmental technology in a lifecycle perspective at the proposal stage. Publications Office of the European Union. (European Union Environmental Technology Verification Guidance Documents)
Raikova, S., Chuck, C., McManus, M., Allen, M., Yallop, M. and Baena, S., 2016. Exploring a range of UK seaweed species for the production of fuels and fertiliser.
Rowlandson, J. L., Edler, K., Tian, M. and Ting, V., 2016. Towards Tuneable Lignin-Derived Activated Carbons for Energy Storage Applications. In: 4th Royal Society of Chemistry Early Career Symposium, 2016-06-23 - 2016-06-24.
Rowlandson, J. L., Ting, V., Edler, K. and Tian, M., 2016. How to save the world with Leerdammer cheese:Engineering nanoporous materials for clean water.
Rowlandson, J. L., Ting, V., Edler, K. and Tian, M., 2016. Towards Tuneable Lignin-Derived Activated Carbons for Energy Storage Applications. In: Early Career Energy Sector Chemists Symposium 2016, 2016-02-16 - 2016-02-16, Royal Society of Chemistry, Burlington House.
Sadhukhan, J., Martinez-Hernandez, E. and Ng, K. S., 2016. Biorefinery value chain creation. Chemical Engineering Research & Design, 107, pp. 1-3.
Sadhukhan, J., Ng, K. S. and Martinez-Hernandez, E., 2016. Novel integrated mechanical biological chemical treatment (MBCT) systems for the production of levulinic acid from fraction of municipal solid waste:A comprehensive techno-economic analysis. Bioresource Technology, 215, pp. 131-143. Item availability may be restricted.
Sadhukhan, J., Ng, K. S. and Martinez-Hernandez, E., 2016. Process systems engineering tools for biomass polygeneration systems with carbon capture and Reuse. In: Ng, D. K. S., Tan, R. R., Foo, D. C. Y. and El-Halwagi, M. M., eds. Process Design Strategies for Biomass Conversion Systems.1 ed. Chichester, U. K.: John Wiley and Sons, pp. 217-245.
Samsatli, S., Ramos, A., Matchett, M., Brandon, N. P., Shah, N. and Samsatli, N. J., 2016. Whole-systems modelling of alternatives for future domestic transport. Computer Aided Chemical Engineering, 38, pp. 457-462. Item availability may be restricted.
Samsatli, S., Staffell, I. and Samsatli, N. J., 2016. Optimal design and operation of integrated wind-hydrogen-electricity networks for decarbonising the domestic transport sector in Great Britain. International Journal of Hydrogen Energy, 41, pp. 447-475.
Sargeant, L. A., Mardell, M., Saad-Allah, K. M., Hussein, A. H., Whiffin, F., Santomauro, F. and Chuck, C. J., 2016. Production of lipid from depolymerised lignocellulose using the biocontrol yeast, Rhodotorula minuta:the fatty acid profile remains stable irrespective of environmental conditions. European Journal of Lipid Science and Technology, 118 (5), pp. 777-787.
Satchatippavarn, S., Martinez-Hernandez, E., Leung Pah Hang, M. Y., Leach, M. and Yang, A., 2016. Urban biorefinery for waste processing. Chemical Engineering Research & Design, 107, pp. 81-90.
Shamsaei, E., Lin, X., Low, Z.-X., Abbasi, Z., Hu, Y., Liu, J. Z. and Wang, H., 2016. Aqueous phase synthesis of ZIF-8 membrane with controllable location on an asymmetrically porous polymer substrate. ACS Applied Materials and Interfaces, 8 (9), pp. 6236-6244.
Shi, H., Burmeister, D. M., Frost, A., Patterson, D. A. and James, B., 2016. The use of thaumatin and bovine serum albumin as proteins in model wine solutions in bentonite fining. The Journal of Wine Research, 27 (3), pp. 193-201. Item availability may be restricted.
Storm, M. P., Sorrell, I., Shipley, R., Regan, S., Luetchford, K. A., Sathish, J., Webb, S. and Ellis, M. J., 2016. Hollow fiber bioreactors for In Vivo-like mammalian tissue culture. Journal of Visualized Experiments, 2016 (111), e53431.
Torrente Murciano, L., Chapman, R. S. L., Narvaez-Dinamarca, A., Mattia, D. and Jones, M., 2016. Effect of nanostructured ceria as support for the iron catalysed hydrogenation of CO2 into hydrocarbons. Physical Chemistry Chemical Physics, 18 (23), pp. 15496-15500.
Walsh, D., Sanchez-Ballester, N. M., Ting, V. P., Ariga, K. and Weller, M. T., 2016. Visible light promoted photocatalytic water oxidation:proton and electron collection: via a reversible redox dye mediator. Catalysis Science and Technology, 6 (11), pp. 3718-3722.
Wang, X., Liu, J., Leong, S., Lin, X., Wei, J., Kong, B., Xu, Y., Low, Z.-X., Yao, J. and Wang, H., 2016. Rapid construction of ZnO@ZIF-8 heterostructures with size-selective photocatalysis properties. ACS Applied Materials and Interfaces, 8 (14), pp. 9080-9087.
Wei, J., Low, Z.-X., Ou, R., Simon, G. P. and Wang, H., 2016. Hydrogel-polyurethane interpenetrating network material as an advanced draw agent for forward osmosis process. Water Research, 96, pp. 292-298.
Whiffin, F., Santomauro, F. and Chuck, C., 2016. Toward a microbial palm oil substitute:oleaginous yeasts cultured on lignocellulose. Biofuels, Bioproducts and Biorefining
Xue, S., Jiang, H., Zhong, Z., Low, Z.-X., Chen, R. and Xing, W., 2016. Palladium nanoparticles supported on a two-dimensional layered zeolitic imidazolate framework-L as an efficient size-selective catalyst. Microporous and Mesoporous Materials, 221, pp. 220-227.
Zhang, B., Fang, J., Li, J., Lau, J. J., Mattia, D., Zhong, Z., Xie, J. and Yan, N., 2016. Soft, oxidative stripping of alkyl thiolate ligands from hydroxyapatite-supported gold nanoclusters for oxidation reactions. Chemistry - An Asian Journal, 11 (4), pp. 532-539.
Zhu, N., Sensharma, D., Wix, P., Lennox, M. J., Düren, T., Wong, W.-Y. and Schmitt, W., 2016. Framework-isomerism:highly augmented copper(II) paddlewheel-based MOF with unusual (3,4)-net topology. European Journal of Inorganic Chemistry, 2016 (13-14), pp. 1939-1943.
2015
Al-Janabi, N., Hill, P., Torrente-Murciano, L., Garforth, A., Gorgojo, P., Siperstein, F. and Fan, X., 2015. Mapping the Cu-BTC metal-organic framework (HKUST-1) stability envelope in the presence of water vapour for CO2 adsorption from flue gases. Chemical Engineering Journal, 281, pp. 669-677.
Al-Marshed, A., Hart, A., Leeke, G., Greaves, M. and Wood, J., 2015. Effectiveness of different transition metal dispersed catalysts for in situ heavy oil upgrading. Industrial & Engineering Chemistry Research, 54 (43), pp. 10645-10655.
Al-Marshed, A., Hart, A., Leeke, G., Greaves, M. and Wood, J., 2015. Optimization of Heavy Oil Upgrading Using Dispersed Nanoparticulate Iron Oxide as a Catalyst. Energy and Fuels, 29 (10), pp. 6306-6316.
Argyle, I., 2015. Synthetic membrane performance modification by selective species adsorption. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Argyle, I., Pihlajamӓki, A. and Bird, M., 2015. Black tea liquor ultrafiltration:effect of ethanol pre-treatment upon fouling and cleaning characteristics. Transactions of the Institution of Chemical Engineers Part C: Food and Bioproducts Processing, 93, 289 - 297.
Argyle, I. .S. and Bird, M. R., 2015. Microfiltration of high concentration black tea streams for haze removal using polymeric membranes. Desalination and Water Treatment, 53 (6), pp. 1516-1531.
Argyle, I. S., Pihlajamaki, A. and Bird, M. R., 2015. Ultrafiltration of black tea using diafiltration to recovery valuable components. Desalination and Water Treatment, 53 (6), pp. 1532-1546.
Arnot, T., Skouteris, G., Jraou, M., Feki, F. and Sayadi, S., 2015. Modelling energy consumption in membrane bioreactors for waste water treatment in North Africa. In: Emerging Frontiers for Sustainable Water trilateral conference between South Africa, India and the United Kingdom, 2015-08-03 - 2015-08-05, University of Johannesburg.
Bamford, R., 2015. Biopolymer Supports for Metal Nanoparticles in Catalytic Applications. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Bell, T. E., González-Carballo, J. M., Tooze, R. P. and Torrente-Murciano, L., 2015. Single-step synthesis of nanostructured γ-alumina with solvent reusability to maximise yield and morphological purity. Journal of Materials Chemistry A, 3 (11), pp. 6196-6201.
Bell, T., Gonzalez-Carballo, J. M., Tooze, R. and Torrente Murciano, L., 2015. Single-step synthesis of nanostructured g-alumina with solvent reusability to maximise yield and morphological purity. Journal of Materials Chemistry A, 3, pp. 6169-6201.
Bendall, S., Birdsall-Wilson, M., Jenkins, R., John Chew, Y.M. and Chuck, C. J., 2015. Showcasing chemical engineering principles through the production of biodiesel from spent coffee grounds. Journal of Chemical Education, 92 (4), pp. 683-687.
Bhalla, N., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Protein phosphorylation detection using dual-mode field-effect devices and nanoplasmonic sensors. Scientific Reports, 5, 8687.
Bhalla, N., Formisano, N., Miodek, A., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Integrated nanoplasmonic and field-effect sensing for kinase drug discovery applications. In: 2nd International Conference on Label-Free Technologies, 2015-03-12 - 2015-03-14.
Bhalla, N., Formisano, N., Miodek, A., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Integrated nanoplasmonic and field-effect devices for kinase drug discovery. In: 2nd International Conference on Label-Free Technologies, 2015-03-12 - 2015-03-14.
Bhalla, N., Formisano, N., Miodek, A., Jain, A., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Plasmonic ruler on field-effect devices for kinase drug discovery applications. Biosensors and Bioelectronics, 71, pp. 121-128.
Bhalla, N., Pathak, S., Bowen, C., Taylor, J., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Field-effect devices for kinase drug discovery. In: 4th International Conference on Bio-Sensing Technology, 2015-05-10 - 2015-05-13.
Bimbo, N., Physick, A., Noguera Diaz, A. N., Pugsley, A., Holyfield, L., Ting, V. and Mays, T., 2015. Adsorptive storage of methane - high volumetric and energy densities at moderate pressures and temperatures. In: Royal Society International Seminar - a UK-Japan meeting on Transforming Framework Materials Chemistry, 2015-03-02 - 2015-03-03, Chicheley Hall, Kavli Royal Society International Centre.
Bimbo, N., Physick, A., Noguera-Diaz, A., Pugsley, A., Holyfield, L., Ting, V. and Mays, T., 2015. High volumetric and energy densities of methane stored in nanoporous materials at ambient temperatures and moderate pressures. Chemical Engineering Journal, 272, pp. 38-47.
Bimbo, N., Physick, A., Pugsley, A., Noguera Diaz, A. J., Ting, V. and Mays, T., 2015. Characterisation of methane adsorption in nanoporous materials - tailored porosity for high volumetric and energy densities. In: Characterisation of Porous Materials 7 (CPM-7), 2015-05-03 - 2015-05-06, Delray Beach Marriott HOTEL.
Bimbo, N., Sharpe, J., Holyfield, L., Noguera Diaz, A. J., Ting, V. and Mays, T., 2015. Integrating adsorbents for safer high-pressure hydrogen storage: cryocharging and working capacities of hydrogen tanks. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2014-12-15 - 2014-12-17, University of Birmingham.
Bimbo, N., Xu, W., Sharpe, J., Ting, V. and Mays, T., 2015. Cryocharging and kinetics of high-pressure hydrogen adsorption in MIL-101 (Cr) and AX-21. In: ISSHAC-9 Ninth International Symposium on the Effects of Surface Heterogeneity in Adsorption and Catalysis in Solids, 2015-07-17 - 2015-07-23, Wroclaw, Poland.
Bisignano, F., Mattia, D. and De Luca, G., 2015. Selectivity-permeability optimization of functionalised CNT-polymer membranes for water treatment:A modeling study. Separation and Purification Technology, 146, pp. 235-242.
Boix, M., Eslava, S., Costa Machado, G., Gosselin, E., Ni, N., Saiz, E. and De Coninck, J., 2015. ATR-FTIR measurements of albumin and fibrinogen adsorption:Inert versus calcium phosphate ceramics. Journal of Biomedical Materials Research - Part A, 103 (11), pp. 3493-3502.
Boston, R., Bell, A., Ting, V. P., Rhead, A. T., Nakayama, T., Faul, C. F. J. and Hall, S. R., 2015. Graphene oxide as a template for a complex functional oxide. CrystEngComm, 17 (32), pp. 6094-6097.
Burrows, A. D., Fisher, L. C., Mays, T. J., Rigby, S. P., Ashbrook, S. E. and Dawson, D. M., 2015. Post-synthetic modification of zinc metal-organic frameworks through palladium-catalysed carbon-carbon bond formation. Journal of Organometallic Chemistry, 792, pp. 134-138.
Cai, J., 2015. Synthesis and modification of zeolite catalysts and an assessment of their activity in the hydrogenation of a model hydrothermal liquefaction (HTL) bio-oil. Thesis (Master of Philosophy (MPhil)). University of Bath.
Chen, B., Xiong, X., Yao, Z., Yin, N., Low, Z.-X. and Zhong, Z., 2015. Integrated membrane process for wastewater treatment from production of instant tea powders. Desalination, 355, pp. 147-154.
Chew, J., Joshi, H. M., Kazarian, S. G., Millan-Agorio, M., Tay, F. H. and Venditti, S., 2015. Deposit Characterization and Measurements. In: Coletti, F. and Hewitt, G., eds. Crude Oil Fouling. Oxford, U. K.: Elsevier, pp. 95-178.
Chouler, J. and Di Lorenzo, M., 2015. Water quality monitoring in developing countries; can microbial fuel cells be the answer? Biosensors, 5 (3), pp. 450-470.
Coombs OBrien, J., Sharma, R. and Scott, J., 2015. Identification of Natural Materials for Tissue Engineering. In: Enabling Healthcare Technologies: Synthesis, Biomaterials and Sensing, 2015-01-28 - 2015-01-28.
Coudert, F. X. and Düren, T., 2015. Molecular simulation of framework materials. Molecular Simulation, 41 (16-17), pp. 1309-1310. Item availability may be restricted.
Courtenay, J., 2015. Surface Modified Cellulose Scaffolds for Tissue Engineering. In: 3rd South West Regional Regenerative Medicine Meeting, 2015-09-22 - 2015-09-23, DoubleTree by Hilton Cadbury House, Congresbury, Bristol, BS49 5AD.
Crittenden, B. D., Yang, M., Dong, L., Hanson, R., Jones, J., Kundu, K., Harris, J., Klochok, O., Arsenyeva, O. and Kapustenko, P., 2015. Crystallization Fouling with Enhanced Heat Transfer Surfaces. Heat Transfer Engineering, 36 (7-8), pp. 741-749.
Di Lorenzo, M., 2015. Use of microbial fuel cells in sensors. In: Scott, K. and Hao Yu, E., eds. Microbial Electrochemical and Fuel Cells. Cambridge, U. K.: Woodhead Publishing, pp. 341-356. (Woodhead Publishing Series in Energy)
Donnelly, J., 2015. Catalytic synthesis of novel transport fuel substitutes from industrially produced fermentation broths. In: 11th International Conference on Renewable Resources and Biorefineries, 2015-06-03 - 2015-06-05.
Donnelly, J., Muller, C., Wiemans, L., Chuck, C. and Dominguez, P., 2015. Upgrading biogenic furans:blended C10–C12 platform chemicals via lyase-catalyzed carboligations and formation of novel C12 –choline chloride-based deep-eutectic-solvents. Green Chemistry, 17 (5), pp. 2714-2718.
Du Toit, H., 2015. Development of Miniature Enzymatic Biofuel Cells as Potential Power Sources for Implantable Medical Devices. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Du Toit, H. and Di Lorenzo, M., 2015. Continuous power generation from glucose with two different miniature flow-through enzymatic biofuel cells. Biosensors and Bioelectronics, 69, pp. 199-205.
Elahi, S., 2015. Formulation of nano-structured emulsions for use in food and healthcare applications. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Estrela, P., Bhalla, N., Di Lorenzo, M. and Pula, G., 2015. Researchers develop platform to aid kinase drug discovery. Pharmaceutical Journal
Fletcher, R. E., Wells, S., Leung, K. M., Edwards, P. P. and Sartbaeva, A., 2015. Intrinsic flexibility of porous materials:theory, modelling and the flexibility window of the EMT zeolite framework. Acta Crystallographica Section B-Structural Science, 71 (Part 6), 641–647.
Foo, R., Vazhnova, T., Lukyanov, D. B., Millington, P., Collier, J., Rajaram, R. and Golunski, S., 2015. Formation of reactive Lewis acid sites on Fe/WO3–ZrO2 catalysts for higher temperature SCR applications. Applied Catalysis B: Environmental, 162, pp. 174-179.
Forgacs, G., Law, I. and Arnot, T., 2015. An accelerated restart strategy for two stage anaerobic digestion systems: Simulation, lab-scale, and full-scale study. In: 14th World Congress on Anaerobic Digestion, 2015-11-15 - 2015-11-18.
Forgacs, G., Law, I. and Arnot, T., 2015. Development of a food waste anaerobic digestion model using BioWin. In: 14th World Congress on Anaerobic Digestion, 2015-11-15 - 2015-11-18.
Formisano, N., Bhalla, N., Wong, L. C. C., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Multimodal electrochemical and nanoplasmonic biosensors using ferrocene crowned nanoparticles for kinase drug discovery applications. Electrochemistry Communications, 57, pp. 70-73.
García, T., Agouram, S., Dejoz, A., Sánchez-royo, J. F., Torrente-murciano, L. and Solsona, B., 2015. Enhanced H2O2 production over Au-rich bimetallic Au–Pd nanoparticles on ordered mesoporous carbons. Catalysis Today, 248, pp. 48-57.
García-Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitián, F. and Saiz, E., 2015. Printing in Three Dimensions with Graphene. Advanced Materials, 27 (10), pp. 1-6.
Gilbank, A., 2015. Ceramic Nanostructured Catalysts. Thesis (Doctor of Philosophy (PhD)).
Gu, W.-x., Low, Z.-X., Feng, Y., Wei, J. and Wang, H., 2015. Investigating forward osmosis process for simultaneous preparation of brown coal slurry and wastewater reclamation. Fuel Processing Technology, 131, pp. 414-420.
Hart, A., Greaves, M. and Wood, J., 2015. A comparative study of fixed-bed and dispersed catalytic upgrading of heavy crude oil using-CAPRI. Chemical Engineering Journal, 282, pp. 213-223.
Hart, A., Lewis, C., White, T., Greaves, M. and Wood, J., 2015. Effect of cyclohexane as hydrogen-donor in ultradispersed catalytic upgrading of heavy oil. Fuel Processing Technology, 138, pp. 724-733.
Hathaway, H., Alves, D. R., Bean, J., Perez Esteban, P., Ouadi, K., Mark Sutton, J. and Jenkins, A. T. A., 2015. Poly(N-isopropylacrylamide-co-allylamine) (PNIPAM-co-ALA) nanospheres for the thermally triggered release of Bacteriophage K. European Journal of Pharmaceutics and Biopharmaceutics, 96, pp. 437-441.
Herdes, C., Santiso, E. E., James, C., Eastoe, J. and Müller, E. A., 2015. Modelling the interfacial behaviour of dilute light-switching surfactant solutions. Journal of Colloid and Interface Science, 445, pp. 16-23.
Herdes, C., Totton, T. S. and Müller, E. A., 2015. Coarse grained force field for the molecular simulation of natural gases and condensates. Fluid Phase Equilibria, 406, pp. 91-100.
Hill, A. K. and Torrente-Murciano, L., 2015. Low temperature H2 production from ammonia using ruthenium-based catalysts:Synergetic effect of promoter and support. Applied Catalysis B: Environmental, 172-173, pp. 129-135.
Hofman, J., 2015. Reducing costs, consumption and risk. Water Active
Hofman-Caris, C. H. M., Harmsen, D. J. H., Wols, B. A., van Pol, W., Knol, T., van Remmen, T. and Hofman, J., 2015. Energy efficient UV/H2O2 processes for conversion of pharmaceuticals in drinking water: effect of water quality. In: 11 Aachener Tagung Wassertechnologie, 2015-10-27 - 2015-10-28.
Holyfield, L., Dawson, R., Noguera Diaz, A. J., Bennet, J., Weatherby, N., Burrows, A. and Mays, T., 2015. PIM-MOF Composites for Use in Hybrid Hydrogen Storage Tanks. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2015-12-14 - 2015-12-16, University of Bath.
Holyfield, L., Dawson, R., Noguera Diaz, A. J., Bennet, J., Weatherby, N., Burrows, A. and Mays, T., 2015. PIM-MOF Composites for Use in Hybrid Hydrogen Storage Tanks. In: ISSHAC-9 Ninth International Symposium on the Effects of Surface Heterogeneity in Adsorption and Catalysis in Solids, 2015-07-17 - 2015-07-23, Wroclaw, Poland.
Hong, W. Y., Perera, S. P. and Burrows, A. D., 2015. Manufacturing of metal-organic framework monoliths and their application in CO2 adsorption. Microporous and Mesoporous Materials, 214, pp. 149-155.
Hu, J., Zhong, Z., Zhang, F., Xing, W., Low, Z.-X. and Fan, Y., 2015. Coating of ZnO nanoparticles onto the inner pore channel surface of SiC foam to fabricate a novel antibacterial air filter material. Ceramics International, 41 (5, Part B), pp. 7080-7090.
Huang, P., Chang, W.-S., Ansell, M., Chew, J. and Shea, A., 2015. Density distribution profile for internodes and nodes of Phyllostachys edulis (Moso bamboo) by computer tomography scanning. Construction and Building Materials, 93, pp. 197-204.
Jeffs, C., 2015. Removal of toxic industrial chemicals using novel adsorbent hollow fibres. Thesis (Doctor of Philosophy (PhD)).
Jenkins, R. W., Sargeant, L. A., Whiffin, F. M., Santomauro, F., Kaloudis, D., Mozzanega, P., Bannister, C., Baena, S. and Chuck, C. J., 2015. Cross-metathesis of microbial oils for the production of advanced biofuels and chemicals. ACS Sustainable Chemisty and Engineering, 3 (7), pp. 1526-1535.
Kolaczkowski, S., Awdry, S., Le, C., Nuckols, M. L., Smith, T. and Thomas, D., 2015. Removal of CO2 from a submersible atmosphere by scrubbing with water:Experiments in a single column. Chemical Engineering Research & Design, 100, 157 - 169.
Kopac, D., Mundell, C. G., Japelj, J., Arnold, D. M., Steele, I. A., Guidorzi, C., Dichiara, S., Kobayashi, S., Gomboc, A., Harrison, R. M., Lamb, G. P., Melandri, A., Smith, R. J., Virgili, F. J., Castro-Tirado, A. J., Gorosabel, J., Järvinen, A., Sánchez-Ramárez, R., Oates, S. R. and Jelánek, M., 2015. Limits on optical polarization during the prompt phase of GRB 140430A. Astrophysical Journal, 813 (1), 1.
Le, C. D. and Kolaczkowski, S. T., 2015. Steam gasification of a refuse derived char:reactivity and kinetics. Chemical Engineering Research & Design, 102, pp. 389-398. Item availability may be restricted.
Le, C. D., Kolaczkowski, S. T. and McClymont, D. W. J., 2015. Using quadrupole mass spectrometry for on-line gas analysis - Gasification of biomass and refuse derived fuel. Fuel, 139, pp. 337-345.
Leung Pah Hang, M., Martinez-Hernandez, E., Leach, M. and Yang, A., 2015. Engineering design of localised synergistic production systems. Computer Aided Chemical Engineering, 37, pp. 2363-2368.
Lewis, W., Chew, J. and Bird, M., 2015. Investigating the influence of buoyancy on deposition and shear-induced removal during the cross-flow microfiltration of a model suspension.
Low, Z.-X., Liu, Q., Shamsaei, E., Zhang, X. and Wang, H., 2015. Preparation and characterization of thin-film composite membrane with nanowire-modified support for forward osmosis process. Membranes, 5 (1), pp. 136-149.
Low, Z.-X., Wang, Z., Leong, S., Razmjou, A., Dumée, L. F., Zhang, X. and Wang, H., 2015. Enhancement of the antifouling properties and filtration performance of poly(ethersulfone) ultrafiltration membranes by incorporation of nanoporous titania nanoparticles. Industrial & Engineering Chemistry Research, 54 (44), pp. 11188-11198.
López, J. M., Gilbank, A. L., García, T., Solsona, B., Agouram, S. and Torrente-Murciano, L., 2015. The prevalence of surface oxygen vacancies over the mobility of bulk oxygen in nanostructured ceria for the total toluene oxidation. Applied Catalysis B: Environmental, 174-175, pp. 403-412.
M. Kabir, M., Forgacs, G. and Sárvári Horváth, I., 2015. Biogas from Lignocellulosic Materials. In: Lignocellulose-Based Bioproducts. Springer, p. 207. (Biofuel and Biorefinery Technologies)
Mahy, W., Plucinski, P., Jover, J. and Frost, C. G., 2015. Ruthenium-catalyzed O- to S-alkyl migration:a pseudoreversible Barton-McCombie pathway. Angewandte Chemie-International Edition, 54 (37), pp. 10944-10948.
Manning, H., 2015. The fractionation of gum arabic using synthetic membranes. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Manning, H. E. and Bird, M. R., 2015. Gum arabic fractionation using synthetic membranes:the importance of fouling. Food and Bioproducts Processing, 93, pp. 298-303.
Martinez-Hernandez, E., Leach, M. and Yang, A., 2015. Impact of bioenergy production on ecosystem dynamics and services-a case study on U.K. heathlands. Environmental Science and Technology, 49 (9), pp. 5805-5812.
Mattia, D., Jones, M., O'Byrne, J., Griffiths, O., Owen, R., Sackville, E., McManus, M. and Plucinski, P., 2015. Towards Carbon Neutral CO2 Conversion to Hydrocarbons. ChemSusChem, 8 (23), pp. 4064-4072. Item availability may be restricted.
Mattia, D., Leese, H. and Lee, K. P., 2015. Carbon nanotube membranes:From flow enhancement to permeability. Journal of Membrane Science, 475 (1), pp. 266-272.
Mattsson, T., Lewis, W., Chew, J. and Bird, M., 2015. In situ investigation of soft cake fouling layers using fluid dynamic gauging. Food and Bioproducts Processing, 93, pp. 205-210.
Mattsson, T., Lewis, W. J. T., Chew, Y. M. J. and Bird, M. R., 2015. In situ investigation of soft cake fouling layers using fluid dynamic gauging. Food and Bioproducts Processing, 93, pp. 205-210.
Meneghello, G., Storm, M. P., Chaudhuri, J. B., De Bank, P. A. and Ellis, M. J., 2015. An investigation into the stability of commercial versus MG63-derived hepatocyte growth factor under flow cultivation conditions. Biotechnology Letters, 37 (3), pp. 725-731.
Meng, N., Wang, Z., Low, Z.-X., Zhang, Y., Wang, H. and Zhang, X., 2015. Impact of trace graphene oxide in coagulation bath on morphology and performance of polysulfone ultrafiltration membrane. Separation and Purification Technology, 147, pp. 364-371.
Miles, D. O., Cameron, P. J. and Mattia, D., 2015. Hierarchical 3D ZnO nanowire structures via fast anodization of zinc. Journal of Materials Chemistry A, 3 (34), pp. 17569-17577.
Munn, A. S., Amabilino, S., Stevens, T. W., Daniels, L. M., Clarkson, G. J., Millange, F., Lennox, M. J., Düren, T., Bourelly, S., Llewellyn, P. L. and Walton, R. I., 2015. Metal-organic frameworks from divalent metals and 1,4-benzenedicarboxylate with bidentate pyridine-N-oxide co-ligands. Crystal Growth and Design, 15 (2), pp. 891-899.
Nunes-Pereira, J., Ribeiro, S., Ribeiro, C., Gombek, C. J., Gama, F.M., Gomes, A.C., Patterson, D. and Lanceros-Méndez, S., 2015. Poly(vinylidene fluoride) and copolymers as porous membranes for tissue engineering applications. Polymer Testing, 44, pp. 234-241.
Owens, S., 2015. Kinetics and mechanisms of hydrogen isotope exchange over solid storage media. Thesis (Doctor of Philosophy (PhD)). University of Bath. Item availability may be restricted.
Peck, O. P. W., Chew, Y. M. J., Bird, M. R. and Bolhuis, A., 2015. Application of fluid dynamic gauging in the characterization and removal of biofouling deposits. Heat Transfer Engineering, 36 (7-8), pp. 685-694.
Perez Esteban, P., Moore, C., Scott, A. and Ellis, M., 2015. Engineering a capillary bed bioreactor for dermal bioavailability and toxicity testing: caffeine permeation across novel hollow fibre membranes. In: Tissue and Cell Engineering Society Annual Meeting, 2015-07-19 - 2015-07-21, Grand Harbour Hotel.
Perez Esteban, P., Storm, M., Argyle, I., Regan, S., Sorrel, I., Gardner, I., Webb, S., Moore, C., Pickles, J., Sanders, D., Scott, A. and Ellis, M., 2015. Skin and Liver Bioreactors for Drug Delivery and Clearance. In: SEAC 25 Years of Science Symposium, 2015-06-17 - 2015-06-17.
Physick, A., Wales, D., Shang, J., Smith, V. J., Webley, P., Mays, T. and Ting, V., 2015. Characterisation of a chabazite (Cs) molecular trapdoor material for novel protium-deuterium isotope separation.
Prasse, C., Wenk, J., Jasper, J. T., Ternes, T. A. and Sedlak, D. L., 2015. Co-occurrence of photochemical and microbiological transformation processes in open-water unit process wetlands. Environmental Science & Technology, 49 (24), pp. 14136-14145. Item availability may be restricted.
Pula, G., Estrela, P., Bhalla, N. and Di Lorenzo, M., 2015. Platform for Change. Innovations in Pharmaceutical Technology
Puértolas, B., Hill, A. K., García, T., Solsona, B. and Torrente-Murciano, L., 2015. In-situ synthesis of hydrogen peroxide in tandem with selective oxidation reactions:a mini-review. Catalysis Today, 248, pp. 115-127.
Pérez Esteban, P., 2015. Development of Bacteriophage-based Nano-emulsion Formulations for the Treatment of Burn Wound Infections. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Ramirez Canon, A., 2015. Nanostructured ZnO films for water treatment by photocatalysis. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Rowlandson, J., Edler, K., Parker, S. and Ting, V., 2015. Characterisation of Nanoporous Carbons for Hydrogen Storage Materials. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2014-12-15 - 2014-12-17, University of Birmingham.
Samsatli, S., Samsatli, N. and Shah, N., 2015. Whole-system optimisation of integrated wind-electricity-hydrogen networks for decarbonising the domestic transport sector in Great Britain. In: Computing and Systems Technology Division 2015 - Core Programming Area at the 2015 AIChE Annual Meeting, 2015-11-08 - 2015-11-13. New York, U. S. A.: AIChE, pp. 955-970.
Samsatli, S. and Samsatli, N. J., 2015. A general spatio-temporal model of energy systems with a detailed account of transport and storage. Computers and Chemical Engineering, 80, pp. 155-176.
Samsatli, S., Samsatli, N. J. and Shah, N., 2015. BVCM:a comprehensive and flexible toolkit for whole-system biomass value chain analysis and optimisation - mathematical formulation. Applied Energy, 147, pp. 131-160.
Shamsaei, E., Low, Z.-X., Lin, X., Liu, Z. (j.) and Wang, H., 2015. Polysulfone and its quaternary phosphonium derivative composite membranes with high water flux. Industrial & Engineering Chemistry Research, 54 (13), pp. 3333-3340.
Shamsaei, E., Low, Z.-X., Lin, X., Mayahi, A., Liu, H., Zhang, X., Zhe Liu, J. and Wang, H., 2015. Rapid synthesis of ultrathin, defect-free ZIF-8 membranes via chemical vapour modification of a polymeric support. Chemical Communications, 51 (57), pp. 11474-11477.
Sharpe, J., 2015. Modelling Hydrogen Storage in Nanoporous Materials for use in Aviation. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Sharpe, J. E., Bimbo, N., Ting, V. P., Rechain, B., Joubert, E. and Mays, T. J., 2015. Modelling the potential of adsorbed hydrogen for use in aviation. Microporous and Mesoporous Materials, 209, pp. 135-140.
Silverman, A. I., Nguyen, M. T., Schilling, I. E., Wenk, J. and Nelson, K. L., 2015. Sunlight Inactivation of Viruses in Open-Water Unit Process Treatment Wetlands: Modeling Endogenous and Exogenous Inactivation Rates. Environmental Science & Technology, 49 (5), pp. 2757-2766.
Stockford, C., Brandon, N., Irvine, J., Mays, T., Metcalfe, I., Book, D., Ekins, P., Kucernak, A., Molkov, V., Steinberger-Wilckens, R., Shah, N., Dodds, P., Dueso, C., Samsatli, S. and Thompson, C., 2015. H2FC SUPERGEN:an overview of the hydrogen and fuel cell research across the UK. International Journal of Hydrogen Energy, 40 (15), pp. 5534-5543.
Ting, V. P., Ramirez-Cuesta, A. J., Bimbo, N., Sharpe, J. E., Noguera Diaz, A., Presser, V., Rudic, S. and Mays, T. J., 2015. Direct evidence for solid-like hydrogen in a nanoporous carbon hydrogen storage material at supercritical temperatures. ACS Nano, 9 (8), 8249–8254.
Torrente-Murciano, L. and Garcia-Garcia, F. R., 2015. Effect of nanostructured support on the WGSR activity of Pt/CeO2 catalysts. Catalysis Communications, 71, 4393. Item availability may be restricted.
Torrente-Murciano, L., Nielsen, D., Jackstell, R., Beller, M., Cavell, K. and Lapkin, A. A., 2015. Selective telomerisation of isoprene with methanol by a heterogeneous palladium resin catalyst. Catalysis Science and Technology, 5 (2), pp. 1206-1212.
Torrente-Murciano, L., Villager, T. and Chadwick, D., 2015. Selective oxidation of salicylic alcohol to aldehyde with O2/H2 using Au-Pd on titanate nanotubes catalysts. ChemCatChem, 7 (6), pp. 925-927.
Varanasi, S., Low, Z.-X. and Batchelor, W., 2015. Cellulose nanofibre composite membranes – Biodegradable and recyclable UF membranes. Chemical Engineering Journal, 265, pp. 138-146.
Wales, D., Grand, J., Mintova, S., Ting, V., Burke, R., Edler, K., Burrows, A. and Bowen, C., 2015. In-situ characterisation of the interaction of metal-organic frameworks with gases::towards novel exhaust gas sensors. In: Characterisation of Porous Materials 7 (CPM-7), 2015-05-03 - 2015-05-06, Delray Beach Marriott HOTEL.
Wales, D., Grand, J., Physick, A., Burke, R., Ting, V., Burrows, A., Edler, K., Mintova, S. and Bowen, C., 2015. Determining the suitability of common metal-organic frameworks for exhaust gas sensing. In: 4th Laboratoire Catalyse et Spectrochimie Symposium (4th LCS symposium), 2015-04-28 - 2015-04-29.
Wales, D. J., Grand, J., Ting, V. P., Burke, R. D., Edler, K. J., Bowen, C. R., Mintova, S. and Burrows, A. D., 2015. Gas sensing using porous materials for automotive applications. Chemical Society Reviews, 44 (13), pp. 4290-4321.
Walsh, D., Sanchez-Ballester, N. M., Ting, V. P., Hall, S. R., Terry, L. R. and Weller, M. T., 2015. Visible light promoted photocatalytic water oxidation:effect of metal oxide catalyst composition and light intensity. Catalysis Science and Technology, 5 (10), pp. 4760-4764.
Wells, S. A., Van Der Kamp, M. W., Mcgeagh, J. D. and Mulholland, A. J., 2015. Structure and Function in Homodimeric Enzymes:Simulations of Cooperative and Independent Functional Motions. PLoS ONE, 10 (8), e0133372.
Wenk, J., Aeschbacher, M., Sander, M., Von Gunten, U. and Canonica, S., 2015. Photosensitizing and inhibitory effects of ozonated dissolved organic matter on triplet-induced contaminant transformation. Environmental Science & Technology, 49 (14), 8541–8549.
Whiffin, F., 2015. A palm oil substitute and care product emulsions from a yeast cultivated on waste resources. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Xiao, H., Zhong, Z., Low, Z.-X., Huang, Y., Sun, Y. and Yao, Z., 2015. Separation of sulfoether compounds in garlic oil by integrated membrane technologies. Journal of Food Process Engineering
Xu, L., Wang, J., Zhang, X., Hou, D. and Yu, Y., 2015. Development of a novel integrated membrane system incorporated with an activated coke adsorption unit for advanced coal gasification wastewater treatment. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 484, pp. 99-107.
Zhao, Y., Zhong, Z., Low, Z. X. and Yao, Z., 2015. A multifunctional multi-walled carbon nanotubes/ceramic membrane composite filter for air purification. RSC Advances, 5 (112), pp. 91951-91959.
Zhong, Z., Xu, F., Cao, Y., Low, Z.-X., Zhang, F. and Xing, W., 2015. Purifying condensed water with ceramic ultrafiltration membranes. Journal of Chemical Technology & Biotechnology, 90 (11), pp. 2092-2099.
2014
Letcher, T., Scott, J. L. and Patterson, D. A., eds., 2014. Chemical Processes for a Sustainable Future. Royal Society of Chemistry. (RSC Smart Materials)
Adamaki, V., Clemens, F., Taylor, J., Mays, T. J. and Bowen, C. R., 2014. Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis. Journal of Materials Science, 49 (21), pp. 7597-7603.
Alves, D., Gaudion, A., Bean, J., Pérez Esteban, P., Arnot, T. C., Harper, D. R., Kot, W., Hansen, L. H., Enright, M. C. and Jenkins, A. T. A., 2014. Combined use of bacteriophage K and a novel bacteriophage to reduce Staphylococcus aureus biofilm. Applied and Environmental Microbiology, 80 (21), pp. 6694-6703.
An, J. D., Patterson, D. A., McNeil, S. and Hossain, M. M., 2014. Immobilization of lipase on woolen fabrics:enhanced effectiveness in stain removal. Biotechnology Progress, 30 (4), pp. 806-817.
Argyle, I., Pihlajamӓki, A. and Bird, M. R., 2014. Ultrafiltration of black tea using diafiltration to recovery valuable components.
Arnot, T., Skouteris, G., Jraou, M., Feki, F. and Sayadi, S., 2014. Modelling energy consumption in membrane bioreactors for waste water treatment in North Africa. In: WaterBiotech, 2014-01-08 - 2014-01-10, Université Cadi Ayyad.
Barg, S., Perez, F.M., Ni, N., Do Vale Pereira, P., Maher, R.C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C. and Saiz, E., 2014. Mesoscale assembly of chemically modified graphene into complex cellular networks. Nature Communications, 5, 4328.
Bean, J. E., Alves, D. R., Laabei, M., Pérez Esteban, P., Thet, N. T., Enright, M. C. and Jenkins, A. T. A., 2014. Triggered Release of Bacteriophage K from Agarose/Hyaluronan Hydrogel Matrixes by Staphylococcus aureus Virulence Factors. Chemistry of Materials, 26 (24), pp. 7201-7208.
Bhalla, N., Di Lorenzo, M., Pula, G. and Estrela, P., 2014. Novel tools for protein phosphorylation analysis based on proton release detection. In: 24th Anniversary World Congress on Biosensors, 2014-05-27 - 2014-05-30.
Bhalla, N., Di Lorenzo, M., Pula, G. and Estrela, P., 2014. Protein phosphorylation analysis based on proton release detection:potential tools for drug discovery. Biosensors and Bioelectronics, 54, pp. 109-114.
Bimbo, N. M., Sharpe, J., Noguera Diaz, A. N., Physick, A., Holyfield, L., Rowlandson, J., Xu, W., Ladha, A., Ting, V. and Mays, T. J., 2014. Fuel Gas Storage:The Challenge of Hydrogen. In: ChemEngDayUK 2014, 2014-04-07 - 2014-04-08.
Bimbo, N. M., Sharpe, J. E., Ting, V. P., Noguera-Díaz, A. and Mays, T. J., 2014. Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures. Adsorption, 20 (2-3), pp. 373-384.
Bimbo, N., Sharpe, J., Noguera Diaz, A. J., Physick, A., Ting, V. and Mays, T., 2014. Modelling adsorption of supercritical gases: high-pressure methane in microporous materials. In: Characterisation of Porous Solids 10, 2014-05-11 - 2014-05-14, Spain.
Bishopp, S., 2014. A solvent-free alternative for green liquid-liquid biphasic oxidations. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Bishopp, S. D., Scott, J. L. and Torrente Murciano, L., 2014. Insights into biphasic oxidations with hydrogen peroxide; towards scaling up. Green Chemistry, 16 (6), pp. 3281-3285.
Bradley, S., Di Lorenzo, M. and Kasprzyk-Hordern, B., 2014. Microbial Fuel Cells as On-Line Biosensors for Pharmaceuticals in Wastewater. In: Sensors in the Environment 2014, 2014-11-15 - 2014-11-16.
Chapman, L. A. C., Shipley, R. J., Whiteley, J. P., Ellis, M. J., Byrne, H. M. and Waters, S. L., 2014. Optimising cell aggregate expansion in a perfused hollow fibre bioreactor via mathematical modelling. PLoS ONE, 9 (8), e105813.
Chuck, C. and Donnelly, J., 2014. The compatibility of potential bioderived fuels with Jet A-1 aviation kerosene. Applied Energy, 118, pp. 83-91.
Chuck, C., Lou-Hing, D., Dean, R., Sargeant, L., Scott, R. J. and Jenkins, R., 2014. Simultaneous microwave extraction and synthesis of fatty acid methyl ester from the oleaginous yeast Rhodotorula glutinis. Energy, 69, pp. 446-454.
Chuck, C., Santomauro, F., Sargeant, L., Whiffin, F., Chantasuban, T., Abd. Ghaffar, N. R., Wagner, J. and Scott, R. J., 2014. Liquid transport fuels from microbial yeasts - current and future perspectives. Biofuels, 5 (3), pp. 293-311.
Coletti, F., Crittenden, B. D., Haslam, A. J., Hewitt, G. F., Jackson, G., Jimenez-Serratos, G., Macchietto, S., Matar, O. K., Müller, E. A., Sileri, D. and Yang, J., 2014. Modeling of fouling from molecular to plant scale. In: Coletti, F. and Hewitt, G. F., eds. Crude Oil Fouling. Oxford, U. K.: Elsevier, pp. 179-320.
Coletti, F., Crittenden, B. D. and Macchietto, S., 2014. Basic science of the fouling process. In: Coletti, F. and Hewitt, G. F., eds. Crude Oil Fouling. Oxford, U. K.: Elsevier, pp. 23-50.
Crittenden, B. D., Hewitt, G. F., Millan-Agorio, M., Rostani, K., Venditti, S. and Yang, M., 2014. Experimental Generation of Fouling Deposits. In: Coletti, F. and Hewitt, G. F., eds. Crude Oil Fouling. Oxford, U. K.: Elsevier, pp. 51-94.
Di Lorenzo, M., Thomson, A. R., Schneider, K., Cameron, P. J. and Ieropoulosc, I., 2014. A small-scale air-cathode microbial fuel cell for on-line monitoring of water quality. Biosensors and Bioelectronics, 62, pp. 182-188.
Du Toit, H. and Di Lorenzo, M., 2014. Electrodeposited highly porous gold microelectrodes for the direct electrocatalytic oxidation of aqueous glucose. Sensors and Actuators B-Chemical, 192, pp. 725-729.
Du Toit, H. and Di Lorenzo, M., 2014. Glucose oxidase directly immobilized onto highly porous gold electrodes for sensing and fuel cell applications. Electrochimica Acta, 138, pp. 86-92.
Elías-Maxil, J. A., Van Der Hoek, J. P., Hofman, J. and Rietveld, L., 2014. Energy in the urban water cycle:actions to reduce the total expenditure of fossil fuels with emphasis on heat reclamation from urban water. Renewable and Sustainable Energy Reviews, 30, pp. 808-820.
Elías-Maxil, J.A., Van Der Hoek, J.P., Hofman, J. and Rietveld, L., 2014. A bottom-up approach to estimate dry weather flow in minor sewer networks. Water Science and Technology, 69 (5), pp. 1059-1066.
Feng, X., Patterson, D.A., Balaban, M. and Emanuelsson, E., 2014. Increasing reaction rate and conversion in the spinning cloth disc reactor:Investigating the effect of using multiple enzyme immobilized cloths. Chemical Engineering Journal, 255, pp. 356-364.
Feng, X., Patterson, D. A., Balaban, M. and Emanuelsson, E. A. C., 2014. Characterization of liquid flow in the spinning cloth disc reactor:residence time distribution, visual study and modeling. Chemical Engineering Journal, 235, pp. 356-367.
Ferreiro-Rangel, C. A., Seaton, N. A. and Düren, T., 2014. Grand-canonical Monte Carlo adsorption studies on SBA-2 periodic mesoporous silicas. Journal of Physical Chemistry C, 118 (44), pp. 25441-25446.
Firth, B., 2014. Biodiesel Production in Fixed-Bed Monolithic Reactors. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Forgacs, G., Niklasson, C., Sárvári Horváth, I. and Taherzadeh, M. J., 2014. Methane production from feather waste pretreated with Ca(OH)2:Process development and economical analysis. Waste and Biomass Valorization, 5 (1), pp. 65-73.
Gao, C.-H., Chen, Y.-N., Pan, L.-X., Lei, F., Long, B., Hu, L.-Q., Zhang, R.-C., Ke, K. and Huang, R.-M., 2014. Two new cyclic tetrapeptides from deep-sea bacterium bacillus amyloliquefaciens GAS 00152. Journal of Antibiotics, 67, pp. 541-543.
Gordon, P. W., Schöler, M., Föste, H., Helbig, M., Augustin, W., Chew, Y. M. J., Scholl, S., Majschak, J.-P. and Wilson, D. I., 2014. A comparison of local phosphorescence detection and fluid dynamic gauging methods for studying the removal of cohesive fouling layers:effect of layer roughness. Food and Bioproducts Processing, 92 (1), pp. 46-53.
Harris, J., 2014. The Interpretation of Fouling Data from a Stirred Batch Cell. Thesis (Master of Philosophy (MPhil)). University of Bath.
Hart, A., Leeke, G., Greaves, M. and Wood, J., 2014. Down-hole heavy crude oil upgrading by CAPRI:Effect of hydrogen and methane gases upon upgrading and coke formation. Fuel, 119, pp. 226-235.
Hart, A., Leeke, G., Greaves, M. and Wood, J., 2014. Downhole heavy crude oil upgrading using CAPRI:effect of steam upon upgrading and coke formation. Energy & Fuels, 28 (3), pp. 1811-1819.
He, M., Yao, J., Low, Z.-X., Yu, D., Feng, Y. and Wang, H., 2014. A fast in situ seeding route to the growth of a zeolitic imidazolate framework-8/AAO composite membrane at room temperature. RSC Advances, 4 (15), pp. 7634-7639.
Hill, A., 2014. Development of Low Temperature Catalysts for an Integrated Ammonia PEM Fuel Cell. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Hill, A. and Torrente Murciano, L., 2014. In-situ H2 production via low temperature decomposition of ammonia:insights into the role of cesium as a promoter. International Journal of Hydrogen Energy, 39 (15), pp. 7646-7654.
Holyfield, L., Bimbo, N., Ting, V., Burrows, A. and Mays, T., 2014. Evaluation of an Activated Carbon as an Adsorbent in Hybrid High Pressure Hydrogen Storage Tanks. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2014-12-15 - 2014-12-17, University of Birmingham.
Huang, P., Chang, W.-S., Ansell, M., Chew, J., Shea, A., Zeidler, A. and Pickering, S., 2014. Heat transfer simulation and experimental studies of bamboo in radial direction. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.
Jenkins, R., 2014. Renewable liquid transport fuels from microbes and waste resources. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Jenkins, R. W., Stageman, N. E., Fortune, C. M. and Chuck, C. J., 2014. Effect of the type of bean, processing, and geographical location on the biodiesel produced from waste coffee grounds. Energy & Fuels, 28 (2), pp. 1166-1174.
Johns, M., 2014. Predicting the Solubility of Cellulose in Organic Electrolyte Solutions. In: DTC Summer Showcase 2014, 2014-07-07 - 2014-07-09, University of Bath.
Kular, J., Basu, S. and Sharma, R., 2014. The extracellular matrix:Structure, composition, age-related differences, tools for analysis and applications for tissue engineering. Journal of Tissue Engineering, 5, pp. 1-17.
Lanham, A. B., Oehmen, A., Saunders, A. M., Carvalho, G., Nielsen, P. H. and Reis, M. A. M., 2014. Metabolic modelling of full-scale enhanced biological phosphorus removal sludge. Water Research, 66, pp. 283-295.
Lapkin, A. A., Adou, E., Mlambo, B. N., Chemat, S., Suberu, J., Collis, A. E. C., Clark, A. and Barker, G., 2014. Integrating medicinal plants extraction into a high-value biorefinery:an example of Artemisia annua L. Comptes Rendus Chimie, 17 (3), pp. 232-241.
Leese, H. and Mattia, D., 2014. Electroosmotic flow in nanoporous membranes in the region of electric double layer overlap. Microfluidics and Nanofluidics, 16 (4), pp. 711-719.
Lewandowski, M., Babu, G. S., Vezzoli, M., Jones, M. D., Owen, R. E., Mattia, D., Plucinski, P., Mikolajska, E., Ochenduszko, A. and Apperley, D. C., 2014. Investigations into the conversion of ethanol to 1,3-butadiene using MgO:SiO2 supported catalysts. Catalysis Communications, 49, pp. 25-28.
Lewis, W. J. T., 2014. Advanced Studies of Membrane Fouling:Investigation of Cake Fouling Using Fluid Dynamic Gauging. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Liu, Q., Low, Z.-X., Feng, Y., Leong, S., Zhong, Z., Yao, J., Hapgood, K. and Wang, H., 2014. Direct conversion of two-dimensional ZIF-L film to porous ZnO nano-sheet film and its performance as photoanode in dye-sensitized solar cell. Microporous and Mesoporous Materials, 194, pp. 1-7.
Low, Z.-X., Razmjou, A., Wang, K., Gray, S., Duke, M. and Wang, H., 2014. Effect of addition of two-dimensional ZIF-L nanoflakes on the properties of polyethersulfone ultrafiltration membrane. Journal of Membrane Science, 460, pp. 9-17.
Low, Z.-X., Yao, J., Liu, Q., He, M., Wang, Z., Suresh, A. K., Bellare, J. and Wang, H., 2014. Crystal transformation in zeolitic-imidazolate framework. Crystal Growth and Design, 14 (12), pp. 6589-6598.
Mahy, W., Plucinski, P.K. and Frost, C.G., 2014. Copper-catalyzed one-pot synthesis of N-Aryl oxazolidinones from amino alcohol carbamates. Organic Letters, 16 (19), pp. 5020-5023.
Manning, H., 2014. The development of enhanced emulsifying agents by membrane fractionation of gum arabic. In: The 10th International Congress on Membranes and Membrane Processes, 2014-07-20 - 2014-07-25.
Manning, H. and Bird, M. R., 2014. The effect of fouling upon the performance of synthetic membranes used to fractionate gum arabic. In: Fouling and Cleaning in Food Processing 2014: 'Green Cleaning', 2014-03-31 - 2014-04-02.
Martinez-Hernandez, E., Martinez-Herrera, J., Campbell, G. M. and Sadhukhan, J., 2014. Process integration, energy and GHG emission analyses of Jatropha-based biorefinery systems. Biomass Conversion and Biorefinery, 4 (2), pp. 105-124.
Martinez-Hernandez, E., Campbell, G. M. and Sadhukhan, J., 2014. Economic and environmental impact marginal analysis of biorefinery products for policy targets. Journal of Cleaner Production, 74, pp. 74-85.
Mattia, D. and Leese, H., 2014. Controlled hydrothermal pore reduction in anodic alumina membranes. Nanoscale, 6 (22), pp. 13952-13957.
Mattia, D., Lee, K. P. and Calabrò, F., 2014. Water permeation in carbon nanotube membranes. Current Opinion in Chemical Engineering, 4, pp. 32-37.
Mattsson, T., Lewis, W., Chew, J. and Bird, M., 2014. In-situ Investigation of Soft Cake Fouling Layers using Fluid Dynamic Gauging.
McClymont, D. W. J., 2014. Novel Catalyst Systems For DeNOx. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Mejía, A., Herdes, C. and Müller, E. A., 2014. Force fields for coarse-grained molecular simulations from a corresponding states correlation. Industrial & Engineering Chemistry Research, 53 (10), pp. 4131-4141.
Miles, D., Cameron, P. J. and Mattia, D., 2014. Dye-sensitized solar cells using anodized ZnO nanowires. In: MRS Spring Meeting 2014, 2014-04-21 - 2014-04-25, California.
Minett, D.R., O'Byrne, J.P., Pascu, S.I., Plucinski, P.K., Owen, R.E., Jones, M.D. and Mattia, D., 2014. Fe@CNT-monoliths for the conversion of carbon dioxide to hydrocarbons:Structural characterisation and Fischer-Tropsch reactivity investigations. Catalysis Science and Technology, 4 (9), pp. 3351-3358.
Mogh, P., Sharma, R. and Pereira-Guelakis, M., 2014. Extracellular matrix production from nanoscale substrate. US 8715718, 06 May 2014.
Ng, K. S., Sadhukhan, J. and Martinez-Hernandez, E., 2014. Biorefineries and Chemical Processes:Design, Integration and Sustainability Analysis. John Wiley and Sons.
Nuckols, M., Kolaczkowski, S., Awdry, S., Smith, T. and Thomas, D., 2014. Hyperbaric testing of an alternative approach to remove carbon dioxide from underwater life support equipment. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 2014-06-08 - 2014-06-13. American Society of Mechanical Engineers (ASME).
Parker, H., Jones, M. D. and Chuck, C., 2014. Fuel additives from the controlled depolymerization of lignin. In: 248th ACS National Meeting & Exposition, 2014-08-10 - 2014-08-14, USA.
Parker, H., Spellman, J., Chuck, C. and Jones, M. D., 2014. Renewable fuel additives from depolymerized lignin. In: 248th ACS National Meeting & Exposition, 2014-08-10 - 2014-08-14, USA.
Patterson, D., 2014. Overview of Separations’. In: Chemical Processes for a Sustainable Future. Royal Society of Chemistry.
Patterson, D., Davey, C. and Rohani, R., 2014. Membrane separations:from purifications, minimisation, reuse and recycling to process intensification. In: Letcher, T., Scott, J. and Patterson, D. A., eds. Chemical Processes for a Sustainable Future. Cambridge, U. K.: Royal Society of Chemistry, pp. 467-497.
Patterson, D. and Scott, J. L., 2014. General concepts in sustainable chemical processes. In: Patterson, D., Scott, J. and Letcher, T., eds. Chemical Processes for a Sustainable Future. London, U. K.: Royal Society of Chemistry.
Patterson, E. and Leak, D., 2014. Enzyme biotransformations and reactors. In: Patterson, D., Letcher, T. and Scott, J., eds. Chemical Processes for a Sustainable Future. Royal Society of Chemistry.
Perez Esteban, P., Alves, D., Enright, M., Jenkins, A. and Arnot, T., 2014. Investigation of the relative effects of Nano-emulsion and Bacteriophage / Nano-emulsion formulations on S. aureus and P. aeruginosa growth patterns in biofilms. In: Viruses of Microbes 2014: Structure and function, from molecules to communities, 2014-07-14 - 2014-07-18, Zurich.
Perez Esteban, P., Jenkins, A. and Arnot, T., 2014. STABILISATION OF BACTERIOPHAGE-K IN OIL-IN-WATER NANO-EMULSIONS FOR THE TREATMENT OF BURN WOUND INFECTIONS. In: Exploiting Bacteriophages for Bioscience, Biotechnology and Medicine 2014, 2014-01-24 - 2014-01-24.
Physick, A., Owens, S., Shang, J., Webley, P., Mays, T. and Ting, V., 2014. Novel protium-deuterium isotope trapping and breakthrough separation using a molecular trapdoor.
Pugsley, A., Bimbo, N. M., Physick, A., Noguera Diaz, A. N., Sharpe, J., Ting, V. and Mays, T. J., 2014. Fuel Gas Storage:The Challenge of Methane. In: ChemEngDayUK 2014, 2014-04-07 - 2014-04-08.
Pérez Esteban, P., Alves, D., Enright, M. C., Bean, J. E., Gaudion, A., Jenkins, A. T. A., Young, A. E. R. and Arnot, T. C., 2014. Enhancement of the antimicrobial properties of bacteriophage-K via stabilisation using oil-in-water nano-emulsions. Biotechnology Progress, 30 (4), pp. 932-944.
Pérez Esteban, P., Enright, M. C., Jenkins, T. and Arnot, T., 2014. Effect of nano-emulsions and bacteriophage/nano-emulsion formulations on S. aureus and P. aeruginosa growth patterns in biofilms. In: Phages 2014, 2014-09-16 - 2014-09-18.
Quiñones, D.H., Rey, A., Álvarez, P.M., Beltrán, F.J. and Plucinski, P.K., 2014. Enhanced activity and reusability of TiO2 loaded magnetic activated carbon for solar photocatalytic ozonation. Applied Catalysis B: Environmental, 144 (1), pp. 96-106.
Ramirez Canon, A., Mattia, D., Cameron, P. J. and Vezzoli, M., 2014. ZnO Nanostructured photo-catalytic films obtained by anodization and its application in the degradation of organic pollutants. In: 8th European Meeting on Solar Chemistry and Photocatalysis: Environmental Applications, 2014-06-25 - 2014-06-28.
Reynolds, W., Plucinski, P. and Frost, C. G., 2014. Robust and reusable supported palladium catalysts for cross-coupling reactions in flow. Catalysis Science and Technology, 4 (4), pp. 948-954.
Ritos, K., Mattia, D., Calabrò, F. and Reese, J. M., 2014. Flow enhancement in nanotubes of different materials and lengths. Journal of Chemical Physics, 140 (1), 014702.
Rowlandson, J., Parker, S. C., Edler, K. J. and Ting, V., 2014. Analysis of porosity in activated carbons:Reconciling gas sorption with scattering data. In: 10th International Symposium on the Characterization of Porous Solids (COPS-X), 2014-05-11 - 2014-05-14, Granada Exhibition and Conference Centre.
Rowlandson, J., Ting, V. and Parker, S. C., 2014. Structural characterisation and molecular modelling of porous carbons for hydrogen storage. In: DTC symposium series - Hydrogen storage, 2014-01-30 - 2014-01-30, Bath.
Santomauro, F., Whiffin, F., Scott, R. J. and Chuck, C., 2014. Low-cost lipid production by an oleaginous yeast cultured in non-sterile conditions using model waste resources. Biotechnology for Biofuels, 7 (34), pp. 34-43.
Santomauro, F., Whiffin, F., Scott, R. J. and Chuck, C. J., 2014. Correction:low-cost lipid production by an oleaginous yeast cultured in non-sterile conditions using model waste resources. Biotechnology for Biofuels, 7 (1), 42.
Sargeant, L., 2014. The development of industrially-relevant lipids from Rhodotorula species as a feedstock for fuels and commodity products. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Sargeant, L., 2014. The effects of a variety of hydrolysate degradation compounds on the growth and lipid lipid productivity of the oleaginous yeasts, Rhodotorula glutinis and Rhodotorula minuta. In: International Bioenergy Conference, 2014-03-11 - 2014-03-13, Manchester Central Convention Complex.
Sargeant, L. A., Chuck, C. J., Donnelly, J., Bannister, C. D. and Scott, R. J., 2014. Optimizing the lipid profile, to produce either a palm oil or biodiesel substitute, by manipulation of the culture conditions for Rhodotorula glutinis. Biofuels, 5 (1), pp. 33-43.
Schmidtmann, M., Coster, P., Henry, P. F., Ting, V. P., Weller, M. T. and Wilson, C. C., 2014. Determining hydrogen positions in crystal engineered organic molecular complexes by joint neutron powder and single crystal X-ray diffraction. CrystEngComm, 16 (7), p. 1232.
Sciancalepore, A. G., Sallustio, F., Girardo, S., Passione, L. G., Camposeo, A., Mele, E., Di Lorenzo, M., Costantino, V., Schena, F. P. and Pisignano, D., 2014. A bioartificial renal tubule device embedding human renal stem/progenitor cells. PLoS ONE, 9 (1), e87496.
Sharpless, C. M., Aeschbacher, M., Page, S. E., Wenk, J., Sander, M. and McNeill, K., 2014. Photooxidation-induced changes in optical, electrochemical, and photochemical properties of humic substances. Environmental Science and Technology, 48 (5), pp. 2688-2696.
Skouteris, G., Arnot, T., Jraou, M., Feki, F. and Sayadi, S., 2014. Modelling energy consumption in membrane bioreactors for waste water treatment in North Africa. Water Environment Research, 86 (3), pp. 232-244.
Sobolewska, A. M., 2014. New Generic Synthetic Protocols for Pharmaceutical Intermediates Based on Continuous Flow Multifunctional Platforms. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Storm, M.P., Kumpfmueller, B., Bone, H.K., Buchholz, M., Sanchez Ripoll, Y., Chaudhuri, J.B., Niwa, H., Tosh, D. and Welham, M.J., 2014. Zscan4 is regulated by PI3-kinase and DNA-damaging agents and directly interacts with the transcriptional repressors LSD1 and CtBP2 in mouse embryonic stem cells. PLoS ONE, 9 (3).
Sánchez Monsalve, D. A., 2014. Downhole Gasification (DHG) For Improved Oil Recovery. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Teghammar, A., Forgács, G., Sárvári Horváth, I. and Taherzadeh, M. J., 2014. Techno-economic study of NMMO pretreatment and biogas production from forest residues. Applied Energy, 116, pp. 125-133.
Ting, V., Doan, H., Wagner, J. and Chuck, C., 2014. The application of nanoporous materials to problems in sustainable energy. In: Scientific conference on Oil Refining and Pertrochemical Engineering (ORPE 2014), 2014-10-08 - 2014-10-10, Hanoi University of Mining and Geology.
Ting, V. and Doan, V., 2014. Use of waste TPA in the synthesis of a metal organic framework (MOF) for use in hydrogen storage. In: Scientific conference on Oil Refining and Pertrochemical Engineering (ORPE 2014), 2014-10-08 - 2014-10-10, Hanoi University of Mining and Geology.
Torrente Murciano, L., Mattia, D., Jones, M. D. and Plucinski, P. K., 2014. Formation of hydrocarbons via CO2 hydrogenation - A thermodynamic study. Journal of CO2 Utilization, 6, pp. 34-39.
Wagner, J. L., Ting, V. P. and Chuck, C. J., 2014. Catalytic cracking of sterol-rich yeast lipid. Fuel, 130, pp. 315-323.
Wales, D., Grand, J., Talapaneni, S., Ting, V., Burke, R., Burrows, A., Edler, K. and Mintova, S., 2014. Porous Materials for Next Generation Automotive Gas Sensors: Suitability and Application. In: University of Bath MEET symposium 15th September 2014, 2014-09-15 - 2014-09-15, University of Bath.
Wales, D., Ting, V., Burke, R., Burrows, A., Edler, K. and Mintova, S., 2014. Towards Next-Generation Automotive Exhaust Gas Sensors. In: Anglo-French Days on Materials for Energy Efficient Transport, 2014-06-30 - 2014-07-01.
Wilson, C.C., Henry, P.F., Schmidtmann, M., Ting, V.P., Williams, E. and Weller, M.T., 2014. Neutron powder diffraction:New opportunities in hydrogen location in molecular and materials structure. Crystallography Reviews, 20 (3), pp. 162-206.
Wright, B., De Bank, P. A., Luetchford, K. A., Acosta, F. R. and Connon, C. J., 2014. Oxidised alginate hydrogels as niche environments for corneal epithelial cells. Journal of Biomedical Materials Research, Part A, 102 (10), pp. 3393-3400.
Wung, N., Acott, S. M., Tosh, D. and Ellis, M. J., 2014. Hollow fibre membrane bioreactors for tissue engineering applications. Biotechnology Letters, 36 (12), pp. 2357-2366.
Yu, D., Wang, Y., Zhang, L., Low, Z.-X., Zhang, X., Chen, F., Feng, Y. and Wang, H., 2014. Three-dimensional branched single-crystal β-Co(OH)2 nanowire array and its application for supercapacitor with excellent electrochemical property. Nano Energy, 10, pp. 153-162.
Zhong, Z., Yao, J., Low, Z.-X., Chen, R., He, M. and Wang, H., 2014. Carbon composite membrane derived from a two-dimensional zeolitic imidazolate framework and its gas separation properties. Carbon, 72, pp. 242-249.
ter Laak, T., Kooij, P. J. F., Tolkamp, H. and Hofman, J., 2014. Different compositions of pharmaceuticals in Dutch and Belgian rivers explained by consumption patterns and treatment efficiency. Environmental Science and Pollution Research, 21 (22), pp. 12843-12855.
2013
Aarvold, A., Smith, J. O., Tayton, E. R., Lanham, S. A., Chaudhuri, J. B., Turner, I. G. and Oreffo, R. O.C., 2013. The effect of porosity of a biphasic ceramic scaffold on human skeletal stem cell growth and differentiation in vivo. Journal of Biomedical Materials Research - Part A, 101 (12), pp. 3431-3437.
Al Badran, F., Awdry, S. and Kolaczkowski, S.T., 2013. Development of a continuous flow reactor for pharmaceuticals using catalytic monoliths:Pt/C selective oxidation of benzyl alcohol. Catalysis Today, 216, pp. 229-239.
Ali, A., Chapman, G.J., Chew, Y.M.J., Gu, T., Paterson, W.R. and Wilson, D.I., 2013. A fluid dynamic gauging device for measuring fouling deposit thickness in opaque liquids at elevated temperature and pressure. Experimental Thermal and Fluid Science, 48, pp. 19-28.
Ali, A., Chew, J., Paterson, W.R. and Wilson, D.I., 2013. Higher temperature and pressure fluid dynamic gauging.
Arsenyeva, O. P., Crittenden, B., Yang, M. and Kapustenko, P. O., 2013. Accounting for the thermal resistance of cooling water fouling in plate heat exchangers. Applied Thermal Engineering, 61 (1), pp. 53-59.
Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: Tissue and Cell Engineering Society Annual Conference (TCES), 2013-07-23 - 2013-07-25.
Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: 9th Bath Biomechanics Symposium, 2013-09-16.
Benzeval, I., Bowen, C. R., Guy, R. H. and Delgado-Charro, M. B., 2013. Effects of iontophoresis, hydration, and permeation enhancers on human nail plate: Infrared and impedance spectroscopy assessment. Pharmaceutical Research, 30 (6), pp. 1652-1662.
Bimbo, N. M., Sharpe, J., Noguera Diaz, A. N., Physick, A., Ting, V. and Mays, T. J., 2013. Enthalpies of adsorption of hydrogen in carbons and metal-organic frameworks: refining the analysis for improving the design of adsorptive storage systems. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2013-12-16 - 2013-12-18, University of Birmingham.
Bimbo, N., Owens, S., Sharpe, J., Noguera Díaz, A. J., Rushworth, A., Smith, M., Berry, M., Hayes, P. and Mays, T., 2013. Hydrogen Energy Research in the Department of Chemical Engineering, University of Bath, UK. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26.
Bimbo, N., Ting, V., Sharpe, J. and Mays, T., 2013. Analysis of optimal conditions for adsorptive hydrogen storage in microporous solids. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 437, pp. 113-119.
Bimbo, N. M. M. d. S., 2013. Modelling and Analysis of Hydrogen Storage in Nanostructured Solids for Sustainable Energy Systems. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Boiarkina, I., Norris, S. and Patterson, D., 2013. The case for the photocatalytic spinning disc reactor as a process intensification technology:Comparison to an annular reactor for the degradation of methylene blue. Chemical Engineering Journal, 225, pp. 752-765.
Boiarkine, I., Norris, S. and Patterson, D., 2013. Investigation of the effect of flow structure on the photocatalytic degradation of methylene blue and dehydroabietic acid in a spinning disc reactor. Chemical Engineering Journal, 222, pp. 159-171.
Boix, M., Eslava, S., Machado, G., Saiz, E. and De Coninck, J., 2013. Fibrinogen and albumin adsorption on sol-gel calcium phosphate substrates measured by FTIR-ATR. European Cells and Materials, 26 (SUPPL.6), p. 112.
Calabrò, F., Lee, K.P. and Mattia, D., 2013. Modelling flow enhancement in nanochannels:Viscosity and slippage. Applied Mathematics Letters, 26 (10), pp. 991-994.
Chehadeh Al Kahf, D., 2013. Process Modelling of the Recovery of Volatile Organic Compounds on Activated Carbon Monoliths. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Chuck, C. J., Parker, H. J., Jenkins, R. W. and Donnelly, J., 2013. Renewable biofuel additives from the ozonolysis of lignin. Bioresource Technology, 143, pp. 549-554.
Chuck, C. J., Davidson, M. G., Gobius Du Sart, G., Ivanova-Mitseva, P. K., Kociok-Köhn, G. I. and Manton, L. B., 2013. Synthesis and structural characterization of group 4 metal alkoxide complexes of N, N, N ′,N ′-tetrakis(2-hydroxyethyl)ethylenediamine and their use as initiators in the ring-opening polymerization (ROP) of rac -lactide under industrially relevant conditions. Inorganic Chemistry, 52 (19), pp. 10804-10811.
Ciupa, A., De Bank, P. A. and Caggiano, L., 2013. Multicellular aggregation of maltol-modified cells triggered by Fe3+ ions. Chemical Communications, 49 (86), pp. 10148-10150.
Diederich, V. E. G., Studer, P., Kern, A., Lattuada, M., Storti, G., Sharma, R.I., Snedeker, J.G. and Morbidelli, M., 2013. Bioactive polyacrylamide hydrogels with gradients in mechanical stiffness. Biotechnology and Bioengineering, 110 (5), pp. 1508-1519.
Ellis, M.J., 2013. Two- and three-dimensional tissue culture bioprocessing methods for soft tissue engineering. In: Standardisation in Cell and Tissue Engineering: Methods and Protocols. Woodhead Publishing Ltd., pp. 34-53.
Esconjauregui, S., Xie, R., Guo, Y., Pfaendler, S.M.-L., Fouquet, M., Gillen, R., Cepek, C., Castellarin-Cudia, C., Eslava, S. and Robertson, J., 2013. Electrical conduction of carbon nanotube forests through sub-nanometric films of alumina. Applied Physics Letters, 102 (11).
Eslava, S., Zhang, L., Esconjauregui, S., Yang, J., Vanstreels, K., Baklanov, M.R. and Saiz, E., 2013. Metal-organic framework ZIF-8 films as low-κ dielectrics in microelectronics. Chemistry of Materials, 25 (1), pp. 27-33.
Feng, X., Patterson, D.A., Balaban, M. and Emanuelsson, E. A. C., 2013. Characterization of tributyrin hydrolysis by immobilized lipase on woolen cloth using conventional batch and novel spinning cloth disc reactors. Chemical Engineering Research & Design, 91 (9), pp. 1684-1692.
Feng, X., Patterson, D.A., Balaban, M. and Emanuelsson, E. A. C., 2013. Enabling the utilization of wool as an enzyme support:Enhancing the activity and stability of lipase immobilized onto woolen cloth. Colloids and Surfaces B: Biointerfaces, 102, pp. 526-533.
Feng, X., Patterson, D. A., Balaban, M., Fauconnier, G. and Emanuelsson, E. A. C., 2013. The spinning cloth disc reactor for immobilized enzymes:A new process intensification technology for enzymatic reactions. Chemical Engineering Journal, 221, pp. 407-417.
Firth, B. P., Kolaczkowski, S. T., Davidson, M. G. and Awdry, S., 2013. Biodiesel Production in Fixed-Bed Catalytic Reactors. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26.
Forgacs, G., Lundin, M., Taherzadeh, M. J. and Sárvári Horváth, I., 2013. Pretreatment of chicken feather waste for improved biogas production. Biotechnology and Applied Biochemistry, 169 (7), pp. 2016-2028.
Frijns, J., Hofman, J. and Nederlof, M., 2013. The potential of (waste)water as energy carrier:Energy Conversion and Management. Energy Conversion and Management, 65, pp. 357-363.
García-Tuñon, E., Franco, J., Eslava, S., Bhakhri, V., Saiz, E., Giuliani, F. and Guitián, F., 2013. Synthesis and optimization of the production of millimeter-sized hydroxyapatite single crystals by Cl-OH ion exchange. Journal of the American Ceramic Society, 96 (3), pp. 759-765.
Genet, M., Houmard, M., Eslava, S., Saiz, E. and Tomsia, A.P., 2013. Erratum to A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting:Possibilities and limits. Journal of the European Ceramic Society, 33 (8), p. 1393.
Genet, M., Houmard, M., Eslava, S. and Tomsia, A.P., 2013. A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting:Possibilities and limits. Journal of the European Ceramic Society, 33 (4), pp. 679-688.
Gopinathan, N., Greaves, M., Rigby, S.P. and Wood, J., 2013. Investigation of the problems with using gas adsorption to probe catalyst pore structure evolution during coking. Journal of Colloid and Interface Science, 393 (1), pp. 234-240.
Griffen, J., White, J., Kociok-Kohn, G., Lloyd, M., Wells, A., Arnot, T. and Lewis, S., 2013. New aminocyclitols with quaternary stereocentres via acylnitroso cycloaddition with an ipso,ortho-arene dihydrodiol. Tetrahedron, 69 (29), pp. 5989-5997.
Griffiths, O. G., Owen, R. E., O'Byrne, J. P., Mattia, D., Jones, M. D. and McManus, M. C., 2013. Using life cycle assessment to measure the environmental performance of catalysts and directing research in the conversion of CO2 into commodity chemicals:A look at the potential for fuels from 'thin-air'. RSC Advances, 3 (30), pp. 12244-12254.
Griffiths, O.G., O'Byrne, J.P., Torrente-Murciano, L., Jones, M.D., Mattia, D. and McManus, M.C., 2013. Identifying the largest environmental life cycle impacts during carbon nanotube synthesis via chemical vapour deposition. Journal of Cleaner Production, 42, pp. 180-189.
Hancock, S. L., 2013. Preparation of Initiators for Sustainable Polymerisation. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Hancock, S.L., Mahon, M.F. and Jones, M.D., 2013. Aluminium salalen complexes based on 1,2-diaminocyclohexane and their exploitation for the polymerisation of rac-lactide. Dalton Transactions, 42 (25), pp. 9279-9285.
Harkins, M., Lou-Hing, D., Sargeant, L. A. and Chuck, C. J., 2013. Effect of bacterial invasion on the growth and lipid production of the oleaginous yeast Rhodotorula glutinis. Journal of Technology Innovations in Renewable Energy, 2 (3), pp. 222-230.
Head, L. E. and Bird, M. R., 2013. The removal of psychrotropic spores from milk protein isolate feeds using tubular ceramic microfilters. Journal of Food Process Engineering, 36 (1), pp. 113-124.
Head, L. E. and Bird, M. R., 2013. Backwashing of tubular ceramic microfilters fouled with milk protein isolate feeds. Journal of Food Process Engineering, 36 (2), pp. 228-240.
Herdes, C., Prosenjak, C., Román, S. and Müller, E. A., 2013. Fundamental studies of methyl iodide adsorption in DABCO impregnated activated carbons. Langmuir, 29 (23), pp. 6849-6855.
Hill, A., 2013. Design of low temperature catalysts for hydrogen release from ammonia. In: DTC Summer Showcase 2013, 2013-09-16 - 2013-09-18, University of Bath.
Hruzewicz-Kolodziejczyk, A., 2013. Towards a Standard Methodology for Determining Hydrogen Storage in Nanoporous Materials. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Huang, J.-Y., Chew, Y.M.J. and Wilson, D.I., 2013. Investigating the effect of starting mode on food fat gel layer formation on cold surfaces. Journal of Food Engineering, 119 (3), pp. 454-463.
Huang, J. Y., Chew, J. and Wilson, D.I., 2013. The effect of start-up on fat (and wax) fouling tests.
Jeffs, C.A., Smith, M.W., Stone, C.A., Bezzu, C.G., Msayib, K.J., McKeown, N.B. and Perera, S. P., 2013. A polymer of intrinsic microporosity as the active binder to enhance adsorption/separation properties of composite hollow fibres. Microporous and Mesoporous Materials, 170, pp. 105-112.
Jeffs, C., Smith, M. W., Stone, C. A., Crittenden, B. and Perera, S., 2013. Low pressure drop respirator gas filters using adsorbent hollow fibres as an alternative to granular adsorbents. Journal of the International Society for Respiratory Protection, 30, pp. 12-29.
Jenkins, R. W., Munro, M., Nash, S. and Chuck, C. J., 2013. Potential renewable oxygenated biofuels for the aviation and road transport sectors. Fuel, 103, pp. 593-599.
Jodłowski, P.J., Goła̧b, R., Kryca, J., Kołodziej, A., Iwaniszyn, M., Kolaczkowski, S.T. and Łojewska, J., 2013. A comparison between monolithic and wire gauze structured catalytic reactors for CH4 and CO removal from biogas-fuelled engine exhaust. Topics in Catalysis, 56 (1-8), pp. 390-396.
Jraou, M., Feki, F., Arnot, T., Skouteris, G. and Sayadi, S., 2013. Application of membrane bioreactor technology for urban wastewater treatment in Tunisia:Focus on treated water quality. Sustainable Sanitation Practice, 2013 (14), 7.
Lanham, A. B., Oehmen, A., Saunders, A. M., Carvalho, G., Nielsen, P. H. and Reis, M. A. M., 2013. Metabolic versatility in full-scale wastewater treatment plants performing enhanced biological phosphorus removal. Water Research, 47 (19), pp. 7032-7041.
Lanham, A. B., Ricardo, A. R., Albuquerque, M. G. E., Pardelha, F., Carvalheira, M., Coma, M., Fradinho, J., Carvalho, G., Oehmen, A. and Reis, M. A. M., 2013. Determination of the extraction kinetics for the quantification of polyhydroxyalkanoate monomers in mixed microbial systems. Process Biochemistry, 48 (11), pp. 1626-1634.
Lee, K. P. and Mattia, D., 2013. Manufacturing of nanoemulsions using nanoporous anodized alumina membranes:Experimental investigation and process modeling. Industrial & Engineering Chemistry Research, 52 (42), pp. 14866-14874.
Lee, K. P., 2013. Fabrication and Applications of Nanoporous Alumina Membranes. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Lee, K. P. and Mattia, D., 2013. Monolithic nanoporous alumina membranes for ultrafiltration applications:Characterization, selectivity-permeability analysis and fouling studies. Journal of Membrane Science, 435, pp. 52-61.
Leese, H., Bhurtun, V., Lee, K.P. and Mattia, D., 2013. Wetting behaviour of hydrophilic and hydrophobic nanostructured porous anodic alumina. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 420, pp. 53-58.
Leese, H. and Mattia, D., 2013. Wetting in carbon inorganic and organic nanotubes and nanochannels. In: Ondarcuhu, T. and Aime, J.-P., eds. Nanoscale Liquid Interfaces: Wetting, Patterning and Force Microscopy at the Molecular Scale. Pan Stanford Publishing, pp. 361-402.
Li, C., Zhang, R., Wang, L., Bowyer, A., Eisenthal, R., Shen, Y. and Hubble, J., 2013. Purification of lysozyme by intrinsically shielded hydrogel beads. Modern Physics Letters B, 27 (19), 1341028.
Linkhorst, J. and Lewis, W. J. T., 2013. Workshop on membrane fouling and monitoring:a summary. Desalination and Water Treatment, 51 (31-33), pp. 6401-6406.
Liu, Q., Low, Z.-X., Li, L., Razmjou, A., Wang, K., Yao, J. and Wang, H., 2013. ZIF-8/Zn2GeO4 nanorods with an enhanced CO2 adsorption property in an aqueous medium for photocatalytic synthesis of liquid fuel. Journal of Materials Chemistry A, 1 (38), pp. 11563-11569.
Lobanova, O., Herdes, C., Jackson, G. and Müller, E. A., 2013. Development of a coarse-grained force field for aqueous non-ionic surfactant systems using a molecular based equation of state. In: Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, 2013-11-03 - 2013-11-08. AIChE, pp. 1133-1135.
M. Kabir, M., Forgacs, G. and Sárvári Horváth, I., 2013. Enhanced methane production from wool textile residues by thermal and enzymatic pretreatment. Process Biochemistry, 48 (4), pp. 575-580.
Ma, X., James, B., Balaban, M. O., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2013. Quantifying blistering and browning properties of Mozzarella cheese. Part I:Cheese made with different starter cultures. Food Research International, 54 (1), pp. 912-916.
Ma, X., James, B., Balaban, M. O., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2013. Quantifying blistering and browning properties of Mozzarella cheese. Part II:Cheese with different salt and moisture contents. Food Research International, 54 (1), pp. 917-921.
Manning, H. and Bird, M., 2013. The application of hybrid membrane processes to fractionate gum arabic into streams of added value. In: 17th Gums & Stabilisers for the Food Industry Conference, 2013-06-25 - 2013-06-28.
Martinez-Hernandez, E., Campbell, G. and Sadhukhan, J., 2013. Economic value and environmental impact (EVEI) analysis of biorefinery systems. Chemical Engineering Research & Design, 91 (8), pp. 1418-1426.
Martinez-Hernandez, E., Ibrahim, M. H., Leach, M., Sinclair, P., Campbell, G. M. and Sadhukhan, J., 2013. Environmental sustainability analysis of UK whole-wheat bioethanol and CHP systems. Biomass and Bioenergy, 50, pp. 52-64.
Martinez-Hernandez, E., Sadhukhan, J. and Campbell, G. M., 2013. Integration of bioethanol as an in-process material in biorefineries using mass pinch analysis. Applied Energy, 104, pp. 517-526.
Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2013. Novel catalyst systems for deNOx. In: DTC Symposium Series - Sustainable Industrial Catalysis, 2013-01-29.
Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2013. Silver catalysts for NOx storage and reduction using hydrogen. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26.
Minett, D., 2013. Conversion Of Carbon Dioxide To Hydrocarbons Using Iron Nanoparticle-Carbon Nanotube Catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Minett, D., O'Byrne, J., Jones, M., Mattia, D. and Plucinski, P., 2013. Carbon dioxide conversion to hydrocarbons using structured carbon nanotube supports. In: SuBiCat 1: Symposium on sustainable catalytic conversions of renewable substrates, 2012-03-24 - 2013-03-26.
Minett, D. R., O'Byrne, J. P., Jones, M. D., Ting, V. P., Mays, T. J. and Mattia, D., 2013. One-step production of monolith-supported long carbon nanotube arrays. Carbon, 51 (1), pp. 327-334.
Muir, A. C., McKeown, P., Li, Y., Kobine, J. J. and Bird, M. R., 2013. The removal of food fat based soils during the washing of fabrics. Chemical Engineering Research & Design, 91 (9), pp. 1602-1613.
Nuckols, M.L., Kolaczkowski, S.T., Awdry, S., Le, C., Smith, T. and Thomas, D., 2013. An alternative method to remove carbon dioxide from submersible environments. In: Underwater Intervation Conference 2012, 2012-01-24 - 2012-01-26. Curran Associates, pp. 316-324.
O'Byrne, J., Owen, R., Minett, D., Pascu, S. I., Plucinski, P. K., Jones, M. D. and Mattia, D., 2013. High CO2 and CO conversion to hydrocarbons using bridged Fe nanoparticles on carbon nanotubes. Catalysis Science and Technology, 3 (5), pp. 1202-1207.
Owen, R. E., O'Byrne, J. P., Mattia, D., Plucinski, P. K., Pascu, S. I. and Jones, M. D., 2013. Cobalt catalysts for the conversion of CO2 to light hydrocarbons at atmospheric pressure. Chemical Communications, 49 (99), pp. 11683-11685.
Owen, R. E., O'byrne, J. P., Mattia, D., Plucinski, P., Pascu, S. I. and Jones, M. D., 2013. Promoter effects on iron-silica Fischer-Tropsch nanocatalysts:Conversion of carbon dioxide to lower olefins and hydrocarbons at atmospheric pressure. ChemPlusChem, 78 (12), pp. 1536-1544.
Perez Esteban, P., Jenkins, A. and Arnot, T., 2013. Enhancement of the Antimicrobial Properties of Bacteriophage K via Stabilisation in Oil-in-Water Nano-emulsions. In: Phages 2013, 2013-09-10 - 2013-09-12.
Perez Esteban, P., Jenkins, A. and Arnot, T., 2013. Stabilisation of Bacteriophage K in oil-in-water nano- emulsions for the treatment of burn wound infections. In: European Congress of Chemical Engineering/European Congress of Applied Biotechnology (ECCE9/ECAB2), 2013-04-21 - 2013-04-25.
Perez Esteban, P., Jenkins, A. and Arnot, T., 2013. Stabilisation of Bacteriophage K in oil-in-water nano- emulsions for the treatment of burn wound infections. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26.
Physick, A., Noguera Diaz, A. J., Sharpe, J., Bimbo, N., Kang, Z., Jianwen, J., Mays, T. and Ting, V., 2013. In-situ investigation of the pore structure and adsorbed hydrogen density profiles of MIL-101[Cr].
Quignon, B., Pilkington, G. A., Thormann, E., Claesson, P. M., Ashfold, M. N. R., Mattia, D., Leese, H., Davis, S. A. and Briscoe, W. H., 2013. Sustained frictional instabilities on nanodomed surfaces:Stick–slip amplitude coefficient. ACS Nano, 7 (12), pp. 10850-10862.
Ramirez Canon, A., Miles, D., Cameron, P. J. and Mattia, D., 2013. Zinc oxide nanostructured films produced via anodization: A rational design approach.
Ramirez-Canon, A., Miles, D. O., Cameron, P. J. and Mattia, D., 2013. Zinc oxide nanostructured films produced via anodization:A rational design approach. RSC Advances, 3 (47), pp. 25323-25330.
Robinson, K., Ye, S., Yap, Y. and Kolaczkowski, S., 2013. Application of a methodology to assess the performance of a full-scale diesel oxidation catalyst during cold and hot start NEDC drive cycles. Chemical Engineering Research & Design, 91 (7), pp. 1292-1306.
Sargeant, L., 2013. Focus on the future. EPRSC Pioneer Magazine
Sargeant, L., 2013. Waste to wealth: renewable lipids from Rhodotorula glutinis cultured on waste resources. In: 6th International Conference on Green and Sustainable Chemistry, 2013-08-04 - 2013-08-07, University of Nottingham.
Shariffuddin, J. H., Jones, M. I. and Patterson, D. A., 2013. Greener photocatalysts:Hydroxyapatite derived from waste mussel shells for the photocatalytic degradation of a model azo dye wastewater. Chemical Engineering Research & Design, 91 (9), pp. 1693-1704.
Sharma, S.K., Lynch, J., Sobolewska, A.M., Plucinski, P., Watson, R.J. and Williams, J. M. J., 2013. Pt/C catalysed direct reductive amination of nitriles with primary amines in a continuous flow multichannel microreactor. Catalysis Science and Technology, 3 (1), pp. 85-88.
Sharpe, J., 2013. Modelling hydrogen storage in nanoporous materials for use in aviation. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2013-12-16 - 2013-12-18, University of Birmingham.
Sharpe, J., 2013. The modelling of hydrogen storage in nanoporous materials. In: UKERC Summer School, 2013-07-07 - 2013-07-12.
Sharpe, J., Bimbo, N., Noguera Díaz, A. J., Ting, V., Rushworth, A. and Mays, T., 2013. A new generalised model for supercritical sorption in nanoporous materials. In: 11th International Conference on Fundamentals of Adsorption, 2013-05-19 - 2013-05-24.
Sharpe, J., Bimbo, N., Ting, V., Burrows, A., Jiang, D. and Mays, T., 2013. Supercritical hydrogen adsorption in nanostructured solids with hydrogen density variation in pores. Adsorption, 19 (2-4), pp. 643-652.
Shiko, E., 2013. NMR and Gas Sorption Studies of Structure-Transport Relationships in Porous Media. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Shiko, E., Edler, K. J., Lowe, J. P. and Rigby, S. P., 2013. Probing hysteresis during sorption of cyclohexane within mesoporous silica using NMR cryoporometry and relaxometry. Journal of Colloid and Interface Science, 398, pp. 168-175.
Siemieniec, J., Kafarski, P. and Plucinski, P. K., 2013. Hydrophosphonylation of nanoparticle Schiff Bases as a mean for preparation of aminophosphonate-functionalized nanoparticles. Molecules, 18 (7), pp. 8473-8484.
Smith-Badorf, H. D., Chuck, C.J., Mokebo, K.R., MacDonald, H., Davidson, M.G. and Scott, R.J., 2013. Bioprospecting the thermal waters of the Roman Baths:Isolation of oleaginous species and analysis of the FAME profile for biodiesel production. AMB Express, 3 (1), 9.
Ting, V., 2013. IPR Policy Brief - Hydrogen storage materials: driving developments in transport and smoothing routes to renewable generation. University of Bath.
Torrente Murciano, L., Gilbank, A., Puertolas, B., Garcia, T., Solsona, B. and Chadwick, D., 2013. Shape-dependency activity of nanostructured CeO in the total oxidation of polycyclic aromatic hydrocarbons. Applied Catalysis B: Environmental, 132-133, pp. 116-122.
Vazhnova, T. and Lukyanov, D. B., 2013. Fourier self-deconvolution of the IR spectra as a tool for investigation of distinct functional groups in porous materials:Brønsted acid sites in zeolites. Analytical Chemistry, 85 (23), pp. 11291-11296.
Vazhnova, T., Rigby, S. P. and Lukyanov, D. B., 2013. Benzene alkylation with ethane in ethylbenzene over a PtH-MFI catalyst:Kinetic and IR investigation of the catalyst deactivation. Journal of Catalysis, 301, pp. 125-133.
Wenk, J., Aeschbacher, M., Salhi, E., Canonica, S., Von Gunten, U. and Sander, M., 2013. Chemical oxidation of dissolved organic matter by chlorine dioxide, chlorine, and ozone:Effects on its optical and antioxidant properties. Environmental Science and Technology, 47 (19), pp. 11147-11156.
Wenk, J., Eustis, S. N., McNeill, K. and Canonica, S., 2013. Quenching of excited triplet states by dissolved natural organic matter. Environmental Science and Technology, 47 (22), pp. 12802-12810.
Williams, D. P., Shipley, R., Ellis, M. J., Webb, S., Ward, J., Gardner, I. and Creton, S., 2013. Novel in vitro and mathematical models for the prediction of chemical toxicity. Chemical Research in Toxicology, 2 (1), pp. 40-59.
Wills, K. A., Mandujano-ramírez, H. J., Merino, G., Mattia, D., Hewat, T., Robertson, N., Oskam, G., Jones, M. D., Lewis, S. E. and Cameron, P. J., 2013. Investigation of a copper(i) biquinoline complex for application in dye-sensitized solar cells. RSC Advances, 3 (45), pp. 23361-23369.
Wong, K. S., Vazhnova, T., Rigby, S. P. and Lukyanov, D. B., 2013. Temperature effects in benzene alkylation with ethane into ethylbenzene over a PtH-MFI bifunctional catalyst. Applied Catalysis A General, 454, pp. 137-144.
Wu, C., Leese, H.S., Mattia, D., Dagastine, R.R., Chan, D.Y.C. and Tabor, R.F., 2013. Study of fluid and transport properties of porous anodic aluminum membranes by dynamic atomic force microscopy. Langmuir, 29 (28), pp. 8969-8977.
Yang, M. and Crittenden, B., 2013. Use of CFD to determine effect of wire matrix inserts on crude oil fouling conditions. Heat Transfer Engineering, 34 (8-9), pp. 769-775.
Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2013. Mitigation of crude oil fouling by turbulence enhancement in a batch stirred cell. Applied Thermal Engineering, 54 (2), pp. 516-520.
Zhang, R., 2013. Measurement of Effective Diffusivity: Chromatographic Method (Pellets & Monoliths). Thesis (Doctor of Philosophy (PhD)). University of Bath.
Zhao, C., 2013. Structured Catalyst Support Systems. Thesis (Master of Philosophy (MPhil)). University of Bath.
2012
Ahmet, I., Sharpe, J., Ting, V., Bimbo, N., Burrows, A., Godula-Jopek, A. and Mays, T., 2012. Metal-organic framework materials for hydrogen storage in aerospace applications. In: CPM-6, 2012-04-30 - 2012-05-02.
Ang, S. M. C., Brett, D. J. L., Staffell, I., Hawkes, A. D., Fraga, E. S., Samsatli, N. J. and Brandon, N. P., 2012. Design of fuel-cell micro-cogeneration systems through modeling and optimization. Wiley Interdisciplinary Reviews: Energy and Environment, 1 (2), pp. 181-193.
Ang, S. M. C., Brett, D. J. L., Staffell, I., Hawkes, A. D., Fraga, E. S., Samsatli, N. J. and Brandon, N. P., 2012. Design of fuel cell micro-cogeneration systems through modelling and optimisation. Wiley Interdisciplinary Reviews: Energy and Environment, 1 (2), pp. 181-193.
Arrowsmith, R. L., Pascu, S. I. and Smugowski, H. J., 2012. New developments in the biomedical chemistry of metal complexes:from small molecules to nanotheranostic design. In: Organometallic Chemistry. Cambridge: RSC. (Organometallic Chemistry; 38)
Augustin, W., Chew, Y. M. J., Gordon, P. W., Lister, V. Y., Mayer, M., Paterson, B. R., Peralta, J. M., Scholl, S. and Wilson, D. I., 2012. Dynamic Gauging of Soft Fouling Layers on Solid and Porous Surfaces. Chemie Ingenieur Technik, 84 (1-2), pp. 46-53.
Bamford, R., 2012. Biopolymer supports for catalytic metal nanoparticles. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28.
Bamford, R., 2012. Biopolymer supports for catalytic metal nanoparticles. In: DTC Summer Showcase 2012, 2012-07-09 - 2013-04-13.
Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Regenerative Sports Arena, 2012-07-13.
Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Stem cell expansion in a fluidised bed bioreactor for accelerated osseointegration of bone substitute material. In: TERMIS, 2012-09-04 - 2012-09-08.
Benzeval, I., Bowyer, A. and Hubble, J., 2012. The influence of degree-of-branching and molecular mass on the interaction between dextran and Concanavalin A in hydrogel preparations intended for insulin release. European Journal of Pharmaceutics and Biopharmaceutics, 80 (1), pp. 143-148.
Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Tissue and Cell Engineering Society annual conference 2012, 2012-07-04 - 2012-07-06.
Burrows, A. D., Fisher, L. C., Hodgson, D., Mahon, M. F., Cessford, N. F., Duren, T., Richardson, C. and Rigby, S. P., 2012. The synthesis, structures and reactions of zinc and cobalt metal-organic frameworks incorporating an alkyne-based dicarboxylate linker. CrystEngComm, 14 (1), pp. 188-192.
Chua, L. M., Hitchcock, I., Fletcher, R. S., Holt, E. M., Lowe, J. and Rigby, S. P., 2012. Understanding the spatial distribution of coke deposition within bimodal micro-/mesoporous catalysts using a novel sorption method in combination with pulsed-gradient spin-echo NMR. Journal of Catalysis, 286, pp. 260-265.
Chuck, C. J., Bannister, C. D., Jenkins, R. W., Lowe, J. P. and Davidson, M. G., 2012. A comparison of analytical techniques and the products formed during the decomposition of biodiesel under accelerated conditions. Fuel, 96, pp. 426-433.
Chuck, C. J., Jenkins, R. W., Bannister, C. D., Han, L. and Lowe, J. P., 2012. Design and preliminary results of an NMR tube reactor to study the oxidative degradation of fatty acid methyl ester. Biomass and Bioenergy, 47, pp. 188-194.
Cox, O., 2012. Chemical modification of polysulfone. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2012. A theoretical approach to zonation in a bioartificial liver. Biotechnology and Bioengineering, 109 (1), pp. 234-243.
Firth, B., Kolaczkowski, S. T., Davidson, M. G. and Awdry, S., 2012. Biodiesel Production in Fixed-Bed Catalytic Reactors. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28.
Fitzgerald, L. E., 2012. The application of microfiltration as a partial sterilisation technique for the reduction of psychrotrophic spore forming bacteria from viscous dairy feeds. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Forgacs, G., Pourbafrani, M., Niklasson, C., Taherzadeh, M. J. and Sárvári Horváth, I., 2012. Methane production from citrus wastes:Process development and cost estimation. Journal of Chemical Technology & Biotechnology, 87 (2), pp. 250-255.
Forsey, R. W., Tare, R., Oreffo, R. O. C. and Chaudhuri, J. B., 2012. Perfusion bioreactor studies of chondrocyte growth in alginate-chitosan capsules. Biotechnology and Applied Biochemistry, 59 (2), pp. 142-152.
García, T., Murillo, R., Agouram, S., Dejoz, A., Lázaro, M. J., Torrente Murciano, L. and Solsona, B., 2012. Highly dispersed encapsulated AuPd nanoparticles on ordered mesoporous carbons for the direct synthesis of H2O2 from molecular oxygen and hydrogen. Chemical Communications, 48 (43), pp. 5316-5318.
García-García, F. R., Torrente Murciano, L., Chadwick, D. and Li, K., 2012. Hollow fibre membrane reactors for high H2 yields in the WGS reaction. Journal of Membrane Science, 405-406, pp. 30-37.
Gopinathan, N., 2012. Development of Catalyst Characterisation Techniques. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Gopinathan, N., Greaves, M., Lowe, J. P., Wood, J. and Rigby, S. P., 2012. Determination of the location of coke in catalysts by a novel NMR-based, liquid-porosimetry approach. Journal of Colloid and Interface Science, 381 (1), pp. 164-170.
Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Letzelter, N., York, D. W. and Wilson, D. I., 2012. Elucidating enzyme-based cleaning of protein soils (gelatine and egg yolk) using a scanning fluid dynamic gauge. Chemical Engineering Research & Design, 90 (1), pp. 162-171.
Greaves, M., Dong, L. L. and Rigby, S., 2012. Validation of toe-to-heel air-injection bitumen recovery using 3D combustion-cell results. SPE Reservoir Evaluation and Engineering, 15 (1), pp. 72-85.
Greaves, M., Dong, L. L. and Rigby, S. P., 2012. Simulation study of the toe-to-heel air injection three-dimensional combustion cell experiment and effects in the mobile oil zone. Energy & Fuels, 26 (3), pp. 1656-1669.
Greaves, M., Dong, L. and Rigby, S. P., 2012. SPE 15817: Determination of Limits to Production in THAI. In: SPE Heavy Oil Conference, Calgary, 2012-06-12 - 2012-06-14.
Hruzewicz-Kolodziejczyk, A., Ting, V. P., Bimbo, N. and Mays, T. J., 2012. Improving comparability of hydrogen storage capacities of nanoporous materials. International Journal of Hydrogen Energy, 37 (3), pp. 2728-2736.
Hu, Z., Pantoș, G. D., Kuganathan, N., Arrowsmith, R., Jacobs, R. M. J., Kociok-Köhn, G., O'Byrne, J., Jurkschat, K., Burgos, P., Tyrrell, R. M., Botchway, S. W., Sanders, J. K. M. and Pascu, S. I., 2012. Interactions between amino acid-tagged naphthalenediimide and single walled carbon nanotubes for the design and construction of new bioimaging probes. Advanced Functional Materials, 22 (3), pp. 503-518.
Huang, J. Y., Chew, Y. M. J. and Wilson, I. D., 2012. A spinning disc study of fouling of cold heat transfer surfaces by gel formation from model food fat solutions. Journal of Food Engineering, 109 (1), pp. 49-61.
James, K., 2012. An investigation of the relationship between recycling paper and card and greenhouse gas emissions from land use change. Resources, Conservation and Recycling, 67, pp. 44-55.
Jones, S. A., Chew, Y. M. J., Wilson, D. I. and Bird, M. R., 2012. Fluid dynamic gauging of microfiltration membranes fouled with sugar beet molasses. Journal of Food Engineering, 108 (1), pp. 22-29.
Jones, S., 2012. The Application of Enhanced Fluid Dynamic Gauging as a Fouling Sensor for Pressure Driven Membrane Separations in the Food Industry. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Jones, S. A., Pihlajamäki, A. and Bird, M. R., 2012. The role of synthetic membrane pre-treatment in influencing filtration performance over multiple operational cycles. Separation Science and Technology, 47 (8), pp. 1119-1128.
Kolaczkowski, S., Ye, S., Yap, Y., Robinson, K. and Lukyanov, D., 2012. Transient experiments on a full-scale DOC - methodology and techniques to support modelling. Catalysis Today, 188 (1), pp. 53-61.
Kolaczkowski, S. and Williams, J., 2012. Continuous Flow Solutions for Pharmaceutical Manufacture. University of Bath.
Lanham, A. B., Ricardo, A. R., Coma, M., Fradinho, J., Carvalheira, M., Oehmen, A., Carvalho, G. and Reis, M. A. M., 2012. Optimisation of glycogen quantification in mixed microbial cultures. Bioresource Technology, 118, pp. 518-525.
Le, C. D., 2012. Gasification of Biomass:An Investigation of Key Challenges to Advance Acceptance of the Technology. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Lee, K. P., Leese, H. and Mattia, D., 2012. Water flow enhancement in hydrophilic nanochannels. Nanoscale, 4 (8), pp. 2621-2627.
Lewis, W.J.T., Peck, O.P.W., Muir, A.C., John Chew, Y.M. and Bird, M.R., 2012. The fouling and cleaning of surfaces in the food sector. Food Science and Technology - London, 26 (4), pp. 30-32.
Lewis, W., Chew, J., Chance, R.M.J., Wilcox, M.C. and Bird, M., 2012. Investigations of cake fouling during the cross-flow microfiltration of a model suspension: Influence of buoyancy on deposition and shear-induced removal.
Lewis, W. J. T., Chew, Y. M. J. and Bird, M. R., 2012. The application of fluid dynamic gauging in characterising cake deposition during the cross-flow microfiltration of a yeast suspension. Journal of Membrane Science, 405-406, pp. 113-122.
Lukyanov, D. B., Beckett, S. J. and Vazhnova, T., 2012. Toward better understanding of the catalytic action of acidic zeolites: investigation in methane and ethane activation and transformation. ACS Catalysis, 2 (12), pp. 2596-2601.
Ma, X., James, B., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2012. The stretchability of Mozzarella cheese evaluated by a temperature-controlled 3-prong hook test. Journal of Dairy Science, 95 (10), pp. 5561-5568.
Martinez-Hernandez, E., Campbell, G. and Sadhukhan, J., 2012. Economic value and environmental impact analysis tool for sustainable biorefinery design. Computer Aided Chemical Engineering, 30, pp. 11-15.
Mattia, D. and Calabrò, F., 2012. Explaining high flow rate of water in carbon nanotubes via solid-liquid molecular interactions. Microfluidics and Nanofluidics, 13 (1), pp. 125-130.
Mattia, D., Starov, V. and Semenov, S., 2012. Thickness, stability and contact angle of liquid films on and inside nanofibres, nanotubes and nanochannels. Journal of Colloid and Interface Science, 384 (1), pp. 149-156.
Mays, T., 2012. UK Hydrogen Energy Programme. University of Bath.
Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2012. Novel catalyst systems for deNOx. In: IChemE Catalysis for Energy Meeting, 2012-12-11.
Mcclymont, D., Kolaczkowski, S. T., Molloy, K. C. and Awdry, S., 2012. Novel catalyst systems for deNOx. In: DTC Summer Showcase 2012, 2012-07-09 - 2013-04-13.
Minett, D., Mattia, D., O'Byrne, J. and Jones, M., 2012. Novel approach for the production of monolith supported carbon nanotubes. In: ChemonTubes 2012, International meeting on the chemistry of nanotubes and graphene, 2012-04-01 - 2012-04-05.
Minett, D., O'Byrne, J., Mattia, D. and Jones, M., 2012. Catalysts for carbon dioxide conversion using carbon nanotube supports. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28.
Ochońska, J., McClymont, D., Jodłowski, P.J., Knapik, A., Gil, B., Makowski, W., Łasocha, W., Kołodziej, A., Kolaczkowski, S. T. and Łojewska, J., 2012. Copper exchanged ultrastable zeolite Y - A catalyst for NH3-SCR of NOx from stationary biogas engines. Catalysis Today, 191 (1), pp. 6-11.
Patterson, D., Bowstead, M., Tran, A. and James, B. J., 2012. Towards continuous wine making:The optimization of mixed matrix membranes for wine fining. Procedia Engineering, 44, pp. 131-132.
Patterson, D. and Krohn, K., 2012. Determining wetted membrane microstructures using ESEM and DIC microscopy and their implications to membrane performance. Procedia Engineering, 44, pp. 1491-1493.
Perez Esteban, P., 2012. Development of an Encapsulation/Stabilisation Technique for Bacteriophage Therapy in Burn Site Infections. In: 14th VBST (Vienna-Bath-Siegen-Tuente) Joint Seminar for the Austrian Institute of Technology, 2012-06-18, Vienna.
Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2012. Effects of various polymerization techniques on PANI deposition at the surface of cellulose ester microporous membranes: XPS and electrical conductivity studies. Synthetic Metals, 162 (11-12), pp. 958-967.
Rey, A., Quinones, D. H., Alvarez, P. M., Beltran, F. J. and Plucinski, P. K., 2012. Simulated solar-light assisted photocatalytic ozonation of metoprolol over titania-coated magnetic activated carbon. Applied Catalysis B: Environmental, 111-112, pp. 246-253.
Rouquerol, J., Baron, G., Denoyel, R., Giesche, H., Groen, J., Klobes, P., Levitz, P., Neimark, A. V., Rigby, S., Skudas, R., Sing, K., Thommes, M. and Unger, K., 2012. Liquid intrusion and alternative methods for the characterization of macroporous materials (IUPAC Technical Report). Pure and Applied Chemistry, 84 (1), pp. 107-136.
Scott, R., Arnot, T. and Davidson, M., 2012. Using Algae in the Wastewater Treatment Process: Sustainable Technology at the University of Bath. University of Bath.
Shariki, S., Cox, O.T.L., Tickell, D.A., James, T.D., Dale, S.E.C., Marken, F., Pereira Morais, M.P., Van Den Elsen, J.M.H. and Bending, S., 2012. Coil-by-coil assembly of poly[acrylamide-co-3-(methacryl-amido)- phenylboronic acid] with polydiallyldimethyl-ammonium to give alizarin red S responsive films. Journal of Materials Chemistry, 22 (36), pp. 18999-19006.
Sharma, R. I. and Snedeker, J. G., 2012. Paracrine interactions between mesenchymal stem cells affect substrate driven differentiation toward tendon and bone phenotypes. PLoS ONE, 7 (2), e31504.
Sharpe, J., Burrows, A., Godula-Jopek, A. and Mays, T., 2012. Hydrogen storage in nanoporous materials for aerospace applications. In: EADS Innovation Works PhD Showcase, 2012-05-27 - 2012-05-28.
Shiko, E., Edler, K.J., Lowe, J.P. and Rigby, S.P., 2012. Probing the impact of advanced melting and advanced adsorption phenomena on the accuracy of pore size distributions from cryoporometry and adsorption using NMR relaxometry and diffusometry. Journal of Colloid and Interface Science, 385 (1), pp. 183-192.
Skouteris, G., Arnot, T. C., Feki, F., Jraou, M. and Sayadi, S., 2012. Operation of a submerged aerobic membrane bioreactor for decentralised municipal wastewater treatment in North Africa. Water Practice & Technology, 7 (3).
Ting, V. P., Henry, P. F., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2012. Probing hydrogen positions in hydrous compounds:information from parametric neutron powder diffraction studies. Physical Chemistry Chemical Physics, 14 (19), pp. 6914-6921.
Tran, A. T. T., Patterson, D. A. and James, B. J., 2012. Investigating the feasibility of using polysulfone-montmorillonite composite membranes for protein adsorption. Journal of Food Engineering, 112 (1-2), pp. 38-49.
Wenk, J. and Canonica, S., 2012. Phenolic antioxidants inhibit the triplet-induced transformation of anilines and sulfonamide antibiotics in aqueous solution. Environmental Science and Technology, 46 (10), pp. 5455-5462.
Wood, A.J., Fraser, J.D., Swift, S., Patterson-Emanuelson, E. A. C., Amirapu, S. and Douglas, R.G., 2012. Intramucosal bacterial microcolonies exist in chronic rhinosinusitis without inducing a local immune response. American Journal of Rhinology and Allergy, 26 (4), pp. 265-270.
Yang, M. and Crittenden, B. D., 2012. Fouling thresholds in bare tubes and tubes fitted with inserts. Applied Energy, 89 (1), pp. 67-73.
Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2012. Effect of turbulence enhancement on crude oil fouling in a batch stirred cell. Chemical Engineering Transactions, 29, pp. 1459-1464.
Yang, M., Young, A., Niyetkaliyev, A. and Crittenden, B., 2012. Modelling fouling induction periods. International Journal of Thermal Sciences, 51, pp. 175-183.
Ye, S., Yap, Y. H., Kolaczkowski, S. T., Robinson, K. and Lukyanov, D., 2012. Catalyst ‘light-off’ experiments on a diesel oxidation catalyst connected to a diesel engine - methodology and techniques. Chemical Engineering Research & Design, 90 (6), pp. 834-845.
Ying, C.Y.J., Muir, A.C., Valdivia, C.E., Steigerwald, H., Sones Collin L., C., Eason, R.W., Soergel, E. and Mailis, S., 2012. Light-mediated ferroelectric domain engineering and micro-structuring of lithium niobate crystals. Laser and Photonics Reviews, 6 (4), pp. 526-548.
2011
Abeynaike, A., Wang, L., Jones, M. I. and Patterson, D. A., 2011. Pyrolysed powdered mussel shells for eutrophication control: effect of particle size and powder concentration on the mechanism and extent of phosphate removal. Asia-Pacific Journal of Chemical Engineering, 6 (2), pp. 231-243.
Acott, S. M., Parsons, T. M., Nevell, J. M. and Perera, S. P., 2011. PVDF/CB composites prepared by novel solvent casting method for low voltage PTC temperature regulation applications. Journal of Applied Polymer Science, 120 (6), pp. 3673-3678.
Agueda, V. I., Crittenden, B. D., Delgado, J. A. and Tennison, S. R., 2011. Effect of channel geometry, degree of activation, relative humidity and temperature on the performance of binderless activated carbon monoliths in the removal of dichloromethane from air. Separation and Purification Technology, 78 (2), pp. 154-163.
Al Badran, F., 2011. Reactor design: compact and catalytic for speciality chemicals. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Ali, A. M., Emanuelsson, E. A. C. and Patterson, D. A., 2011. Conventional versus lattice photocatalysed reactions: Implications of the lattice oxygen participation in the liquid phase photocatalytic oxidation with nanostructured ZnO thin films on reaction products and mechanism at both 254nm and 340nm. Applied Catalysis B: Environmental, 106 (3-4), pp. 323-336.
Ang, S. M. C., Fraga, E. S., Brandon, N. P., Samsatli, N. J. and Brett, D. J. L., 2011. Fuel cell systems optimisation – Methods and strategies. International Journal of Hydrogen Energy, 36 (22), pp. 14678-14703.
Asli, U. A., 2011. Catalytic Monoliths for Biodiesel Production. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Ayres, J. G., Boyd, R., Cowie, H. and Hurley, J. F., 2011. Costs of occupational asthma in the UK. Thorax, 66 (2), pp. 128-133.
Bannister, C. D., Chuck, C. J., Bounds, M. and Hawley, J. G., 2011. Oxidative stability of biodiesel fuel. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (D1), pp. 99-114.
Bartalena, G., Grieder, R., Sharma, R. I., Zambelli, T., Muff, R. and Snedeker, J. G., 2011. A novel method for assessing adherent single-cell stiffness in tension:Design and testing of a substrate-based live cell functional imaging device. Biomedical Microdevices, 13 (2), pp. 291-301.
Bekou, S. and Mattia, D., 2011. Wetting of nanotubes. Current Opinion in Colloid and Interface Science, 16 (4), pp. 259-265.
Benzeval, I., Turner, I. and Ellis, M., 2011. Physical and numerical design of a fluidised bed bioreactor for stem cell expansion. In: Inaugural South West Regional Regenerative Medicine Meeting, 2011-09-12 - 2011-09-13.
Benzeval, I., Turner, I. G. and Ellis, M. J., 2011. Physical and numberical design of a fluidised bed bioreactor for stem cell expansion. In: World Conference on Regenerative Medicine, 2011-11-02 - 2011-11-04.
Bimbo, N. M., Hruzewicz-Kolodziejczyk, A., Ting, V. and Mays, T. J., 2011. High-pressure experimental data collection, analysis and modelling of hydrogen storage on nanoporous materials. In: MC10: Tenth International Conference on Materials Chemistry,, 2011-07-04 - 2011-07-07.
Bimbo, N., Ting, V. P., Hruzewicz-Kolodziejczyk, A. and Mays, T. J., 2011. Analysis of hydrogen storage in nanoporous materials for low carbon energy applications. Faraday Discussions, 151, pp. 59-74.
Boiarkina, I., Pedron, S. and Patterson, D. A., 2011. An experimental and modelling investigation of the effect of the flow regime on the photocatalytic degradation of methylene blue on a thin film coated ultraviolet irradiated spinning disc reactor. Applied Catalysis B: Environmental, 110 (2), pp. 14-24.
Brustlein, S., Berto, P., Hostein, R., Ferrand, P., Billaudeau, C., Marguet, D., Muir, A., Knight, J. and Rigneault, H., 2011. Double-clad hollow core photonic crystal fiber for coherent Raman endoscope. Optics Express, 19 (13), pp. 12562-12568.
Burrows, A., Fisher, L., Richardson, C. and Rigby, S., 2011. Selective incorporation of ligands into mixed-component metal-organic frameworks. In: British Zeolite Association Spring Meeting 2011, 2011-04-10 - 2011-04-12.
Burrows, A. D., Fisher, L. C., Richardson, C. and Rigby, S. P., 2011. Selective incorporation of functional dicarboxylates into zinc metal-organic frameworks. Chemical Communications, 47 (12), pp. 3380-3382.
Chadwick, D., Torrente Murciano, L. and , D. G. T. I., 2011. Selective catalytic oxidation of C1-C3 alkenes. WO 2011051643 (A1), May 2011.
Crittenden, B. D., Camus, O., Perera, S. P., Mays, T. J., Sanchez-Liarte, F., Tennison, S. R. and Crezee, E., 2011. Nonuniform channels in adsorbent monoliths. AIChE Journal, 57 (5), pp. 1163-1172.
Davidson, A. J., 2011. Bioartificial livers: theoretical methods to improve and optimize design. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2011. Bioartificial livers: A Modelling approach to hollow fibre bioreactor design. European Cells and Materials, 22 (Supplement 2), p. 22.
Dong, L. L., Cheung, C. S. and Leung, C. W., 2011. Combustion optimization of a port-array inverse diffusion flame jet. Energy, 36 (5), pp. 2834-2846.
Dourado, E. M. A., Herdes, C., Van Tassel, P. R. and Sarkisov, L., 2011. Molecular recognition effects in atomistic models of imprinted polymers. International Journal of Molecular Sciences, 12 (8), pp. 4781-4804.
Ellis, M. J. and Chaudhuri, J. B., 2011. The relationship between poly(lactide-co-glycolide) monomer ratio, molecular weight and hollow fibre membrane scaffold morphology. Asia-Pacific Journal of Chemical Engineering, 6 (6), pp. 832-839.
Esconjauregui, S., Fouquet, M., Bayer, B.C., Eslava, S., Khachadorian, S., Hofmann, S. and Robertson, J., 2011. Manipulation of the catalyst-support interactions for inducing nanotube forest growth. Journal of Applied Physics, 109 (4).
Eslava, S., Goodwill, B.P.R., McPartlin, M. and Wright, D.S., 2011. Extending the family of titanium heterometallic-oxo-alkoxy cages. Inorganic Chemistry, 50 (12), pp. 5655-5662.
Forgacs, G., Alinezhad, S., Mirabdollah, A., Feuk-Legarstedt, E. and Sárvári Horváth, I., 2011. Biological treatment of chicken feather waste for improved biogas production. Journal of Environmental Sciences, 23 (10), pp. 1747-1753.
Gopinathan, N., Rigby, S., Greaves, M., Lowe, J., Wood, J. and Dong, L. L., 2011. Determination of the spatial location of coke in catalysts by a novel NMR approach. In: Fantazzini, P., Bortolotti, V., Karger, J. and Galvosas, P., eds. 10th International Bologna Conference on Magnetic Resonance in Porous Media, 2010-09-12 - 2010-09-16.
Greaves, M., Dong, L. L. and Rigby, S. P., 2011. Upscaling THAI: Experiment to pilot. In: Canadian Unconventional Resources Conference 2011, CURC 2011, 2011-11-15 - 2011-11-17.
Greaves, M., Dong, L. L. and Rigby, S. P., 2011. Validation of THAI bitumen recovery using 3D combustion cell results. In: 73rd European Association of Geoscientists and Engineers Conference and Exhibition 2011 - Incorporating SPE EUROPEC 2011, May 23, 2011 - May 26, 2011, 2011-05-23 - 2011-05-26.
Greaves, M., Dong, L. and Rigby, S. P., 2011. Paper A11: Understanding the Mobile Oil Zone in Toe-to-Heel Air Injection (THAI) Process. In: 16th European Symposium on Improved Oil Recovery, 2011-04-12 - 2011-04-14.
Gu, T., Albert, F., Augustin, W., Chew, Y. M. J., Paterson, W. R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D. I., 2011. Fluid dynamic gauging applied to annular test apparatuses for fouling and cleaning. Heat Transfer Engineering, 32 (3-4), pp. 339-348.
Gu, T., Albert, F., Augustin, W., Chew, Y. M. J., Mayer, M., Paterson, W. R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D. I., 2011. Application of fluid dynamic gauging to annular test apparatuses for studying fouling and cleaning. Experimental Thermal and Fluid Science, 35 (3), pp. 509-520.
Hassan, F., Wang, J. W., Chigada, P. I., Al-Duri, B., Rigby, S. P. and Wood, J., 2011. Deactivation during 1-Hexene Isomerization over Zeolite Y and ZSM5 Catalysts under Supercritical Conditions. Industrial & Engineering Chemistry Research, 50 (12), pp. 7161-7171.
Herdes, C., Ribeiro Carrott, M. M. L., Russo, P. A. and Carrott, P. J. M., 2011. Volatile organic compound adsorption on a nonporous silica surface:how do different probe molecules sense the same surface? Langmuir, 27 (24), pp. 14940-14946.
Herdes, C., Russo, P. A., Manuela, M., Carrott, L. R. and Carrott, P. J. M., 2011. Nitrogen adsorption studies on non-porous silica:the annealing effect over surface non-bridging oxygen atoms. Adsorption Science & Technology, 29 (4), pp. 357-364.
Herdes Moreno, C., Ferreiro-Rangel, C. A. and Düren, T., 2011. Predicting neopentane isosteric enthalpy of adsorption at zero coverage in MCM-41. Langmuir, 27 (11), pp. 6738-6743.
Hitchcock, I., Holt, E. M., Lowe, J. P. and Rigby, S. P., 2011. Studies of freezing-melting hysteresis in cryoporometry scanning loop experiments using NMR diffusometry and relaxometry. Chemical Engineering Science, 66 (4), pp. 582-592.
Hitchcock, I., Rigby, S., Chudek, J., Holt, L. and Lowe, J., 2011. MRI and PGSE NMR Studies of Long-range, Pore-pore Interaction Effects in Gas Adsorption. In: Fantazzini, P., Bortolotti, V., Karger, J. and Galvosas, P., eds. Magnetic Resonance in Porous Media.Vol. 1330. , pp. 53-56. (AIP Conference Proceedings)
Hofman-Caris, C. H. M., Harmsen, D. J. H., Wols, B. A., Janssen, L. J. J. M., Beerendonk, E. F., Knol, A. H. and Hofman, J. A. M. H., 2011. Prediction of advanced oxidation performance in UV/H2O 2 reactor systems with LP-UV lamps. Water Science and Technology : Water Supply, 11 (4), pp. 460-467.
Hooper, L. E., Mosley, P. J., Muir, A. C., Wadsworth, W. J. and Knight, J. C., 2011. Coherent supercontinuum generation in photonic crystal fiber with all-normal group velocity dispersion. Optics Express, 19 (6), pp. 4902-4907.
Hooper, L. E., Mosley, P. J., Muir, A. C., Yu, F., Mangan, B. J., Wadsworth, W. J., Knight, J. C. and Dudley, J. M., 2011. Coherent widely tunable source of sub-picosecond pulses using all-normal dispersion fiber supercontinuum. In: 2011 7th International Workshop on Fibre and Optical Passive Components, WFOPC2011. Piscataway, NJ: IEEE.
Jones, M. I., Wang, L. Y., Abeynaike, A. and Patterson, D. A., 2011. Utilisation of waste material for environmental applications: calcination of mussel shells for waste water treatment. Advances in Applied Ceramics, 110 (5), pp. 280-286.
Jones, M. I., Barakat, H. and Patterson, D. A., 2011. Production of hydroxyapatite from waste mussel shells. IOP Conference Series: Materials Science and Engineering, 18 (19), 192002.
Jones, S. A., Bird, M. R. and Pihlajamaki, A., 2011. An experimental investigation into the pre-treatment of synthetic membranes using sodium hydroxide solutions. Journal of Food Engineering, 105 (1), pp. 128-137.
Kolaczkowski, S., Le, C. D. and Awdry, S., 2011. Equilibrium reaction(s) involving H2S and COS species: consideration of thermodynamics and implications on the biomass gasification process. In: Bridgwater, A. V., ed. Proceedings of the bioten conference on biomass, bioenergy and biofuels 2010. Newbury: CPL Press, pp. 733-744.
Kolaczkowski, S., Le, C. D. and Jodlowski, P., 2011. Gasification of wood pellets in an experimental quartz tube gasifier: How visual 1D experiments can aid 3D design considerations. In: Bridgwater, A. V., ed. Proceedings of the bioten conference on biomass, bioenergy and biofuels 2010. Newbury: CPL Press, pp. 720-732.
Kraemer, M., 2011. Novel Scaffolds for Spinal Cord Repair. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Kraemer, M., Chaudhuri, J., De Bank, P. and Ellis, M., 2011. Aligned Neurite Outgrowth on Electrospun PLGA Nanofibres. European Cells and Materials, 22 (S2), p. 59.
Kraemer, M., Chaudhuri, J., Ellis, M. and De Bank, P., 2011. Poly-L-lysine-PLGA Nanofibres as a Conducive Scaffold for Neurite Outgrowth from Neuronal Cells. In: Inaugural SW Regional Regenerative Medicine Meeting, 2011-09-12 - 2011-09-13, Wills Hall, Bristol.
Kraemer, M., Chaudhuri, J., Ellis, M. and De Bank, P., 2011. Promotion of Neurite Outgrowth via Incorporation of Poly-L-lysine into Aligned PLGA Nanofibre Scaffolds. In: Tissue and Cell Engineering Society 2011 Conference, 2011-07-19 - 2011-07-21.
Kraemer, M., Chaudhuri, J., Ellis, M. and De Bank, P., 2011. Promotion of Neurite Outgrowth via Incorporation of Poly-L-lysine into Aligned PLGA Nanofibre Scaffolds. European Cells and Materials, 22 (S3), p. 53.
Lanham, A. B., Moita, R., Lemos, P. C. and Reis, M. A. M., 2011. Long-term operation of a reactor enriched in Accumulibacter clade I DPAOs:Performance with nitrate, nitrite and oxygen. Water Science and Technology, 63 (2), pp. 352-359.
Lanham, A. B., Carvalheira, M., Rodrigues, A. M., Cardoso, V. V., Benoliel, M. J., Maria, T. B., Morgado, M. J., Soares, H. M. V. M., Lemos, P. C. and Reis, M. A. M., 2011. Ethylenediamine-N,N'-diglutaric acid (EDDG) as a promising biodegradable chelator:Quantification, complexation and biodegradation. Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, 46 (6), pp. 553-559.
Lee, K. P., Arnot, T. C. and Mattia, D., 2011. A review of reverse osmosis membrane materials for desalination-development to date and future potential. Journal of Membrane Science, 370 (1-2), pp. 1-22.
Lister, V. Y., Lucas, C., Gordon, P. W., Chew, Y. M. J. and Wilson, D. I., 2011. Pressure mode fluid dynamic gauging for studying cake build-up in cross-flow microfiltration. Journal of Membrane Science, 366 (1-2), pp. 304-313.
Lukyanov, D. B. and Vazhnova, T., 2011. Transformation of methane over platinum supported catalysts at moderate temperature. Journal of Molecular Catalysis A: Chemical, 342-343, pp. 1-5.
Macchietto, S., Hewitt, G. F., Coletti, F., Crittenden, B. D., Dugwell, D. R., Galindo, A., Jackson, G., Kandiyoti, R., Kazarian, S. G., Luckham, P. F., Matar, O. K., Millan-Agorio, M., Muller, E. A., Paterson, W., Pugh, S. J., Richardson, S. M. and Wilson, D. I., 2011. Fouling in crude oil preheat trains: a systematic solution to an old problem. Heat Transfer Engineering, 32 (3-4), pp. 197-215.
Mcclymont, D., 2011. Copper exchanged zeolites for ammonia reduction of NOx from biogas gas engines. In: DTC Summer Showcase 2011, 2011-07-11 - 2011-07-13.
Mcclymont, D., 2011. Multi-Step TPSR/QMS Technique to Study the Kinetics of NH3-SCR. In: International Symposium on Nitrogen Oxides' Emission Abatement 2011, 2011-09-04.
Minett, D., Mattia, D. and Jones, M., 2011. Conversion of carbon dioxide into useful feedstocks using carbon nanotube supports. In: Great Western CO2 meeting, 2011-06-06 - 2011-06-06.
Minett, D., Mattia, D. and Jones, M., 2011. Conversion of carbon dioxide into useful feedstocks using carbon nanotube supports - talk. In: Great Western CO2 meeting, 2011-06-06 - 2011-06-06.
Nevell, J. M. and Perera, S. P., 2011. Novel adsorbent hollow fibres for oxygen concentration. Adsorption, 17 (1), pp. 273-283.
Nuckols, M. L., Kolaczkowski, S., Awdry, S., Le, C. D., Smith, T. and Thomas, D., 2011. An initial assessment for the use of seawater as a method to remove metabolically-produced carbon dioxide from a submersible atmosphere. In: Oceans '11 MTS/IEEE Kona, 2011-09-19 - 2011-09-22.
Oh, J. O., Kimb, G., Mattia, D. and Noh, H., 2011. A novel technique for fabrication of micro- and nanofluidic device with embedded single carbon nanotube. Sensors and Actuators B-Chemical, 154 (1), pp. 67-72.
Patterson, D. A., 2011. Impact of a multimedia laboratory manual: Investigating the influence of student learning styles on laboratory preparation and performance over one semester. Education for Chemical Engineers, 6 (1), e10-e30.
Peralta, J. M., Chew, Y. M. J. and Wilson, D. I., 2011. An analytical method for selecting the optimal nozzle external geometry for fluid dynamic gauging. Chemical Engineering Science, 66 (16), pp. 3579-3591.
Peralta, J. M., Chew, Y. M. J. and Wilson, D. I., 2011. Effect of nozzle external geometry on the pressure and shear stress exerted on the surface being gauged in fluid dynamic gauging. Chemical Engineering Research & Design, 89 (12), pp. 2540-2551.
Perez Esteban, P., Jenkins, A., Enright, M. and Arnot, T., 2011. Development of Responsive Wound Dressings for Treatment of Burns and Wound Site Infections. In: 11th UK Particle Technology Forum, 2011-12-04, University of Loughborough.
Phillips, W., Johnsen, T. E., Caldwell, N. and Chaudhuri, J. B., 2011. The difficulties of supplying new technologies into highly regulated markets: the case of tissue engineering. Technology Analysis and Strategic Management, 23 (3), pp. 213-226.
Pilkington, G. A., Thormann, E., Claesson, P. M., Fuge, G. M., Fox, O. J. L., Ashfold, M. N. R., Leese, H., Mattia, D. and Briscoe, W. H., 2011. Amontonian frictional behaviour of nanostructured surfaces. Physical Chemistry Chemical Physics, 13 (20), pp. 9318-9326.
Pourbafrani, M., Forgacs, G., Sárvári Horváth, I. and Taherzadeh, M. J., 2011. Framställning av mångahanda biprodukter från fasta citrusrester. SE0901415-0, 2011.
Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2011. Membrane potential and impedance studies of polyaniline composite membranes: effects of membrane morphology. Journal of Membrane Science, 385-386, pp. 67-75.
Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2011. Surface and Charge Transport Characterization of Polyaniline−Cellulose Acetate Composite Membranes. Journal of Physical Chemistry B, 115 (7), pp. 1652-1661.
Rigby, S. P., Chigada, P. I., Wang, J., Wilkinson, S. K., Bateman, H., Al-Duri, B., Wood, J., Bakalis, S. and Miri, T., 2011. Improving the interpretation of mercury porosimetry data using computerised X-ray tomography and mean-field DFT. Chemical Engineering Science, 66 (11), pp. 2328-2339.
Rohani, R., Hyland, M. and Patterson, D. A., 2011. A refined one-filtration method for aqueous based nanofiltration and ultrafiltration membrane molecular weight cut-off determination using polyethylene glycols. Journal of Membrane Science, 382 (1-2), pp. 278-290.
Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2011. Experimental optimization of catalytic process in situ for heavy-oil and bitumen upgrading. Journal of Canadian Petroleum Technology, 50 (11-12), pp. 33-47.
Sharma, R. I., Schwarzbauer, J. E. and Moghe, P. V., 2011. Nanomaterials can dynamically steer cell responses to biological ligands. Small, 7 (2), pp. 242-251.
Sharma, S. K., Bishopp, S. D., Allen, C. L., Lawrence, R., Bamford, M. J., Lapkin, A. A., Plucinski, P., Watson, R. J. and Williams, J. M. J., 2011. Copper-catalyzed rearrangement of oximes into primary amides. Tetrahedron Letters, 52 (33), pp. 4252-4255.
Sharma, S. K., Sidhpuria, K. B. and Jasra, R. V., 2011. Ruthenium containing hydrotalcite as a heterogeneous catalyst for hydrogenation of benzene to cyclohexane. Journal of Molecular Catalysis A: Chemical, 335 (1-2), pp. 65-70.
Shipley, R. J., Davidson, A. J., Chan, K., Chaudhuri, J. B., Waters, S. L. and Ellis, M. J., 2011. A strategy to determine operating parameters in tissue engineering hollow fiber bioreactors. Biotechnology and Bioengineering, 108 (6), pp. 1450-1461.
Shipley, R. J., Waters, S. L. and Ellis, M. J., 2011. Fluid and mass transport modelling to drive the design of cell-packed hollow fibre bioreactors. European Cells and Materials, 22 (Supplement 3), p. 72.
Smugowski, H. J., 2011. Magnetic nanoparticulate catalysts in flow processes. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Tanko, N. L., 2011. Transport Relationships in Porous Media as a Model for Oil Reservoir Rocks. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Torrente Murciano, L., García- García, F., Li, K. and Chadwick, D., 2011. Hollow fibre membrane reactors for high yields: catalysis and process integration. In: 10th International Conference on Catalysis in Membrane Reactors (ICCMR10), 2011-06-20 - 2011-06-24.
Torrente Murciano, L., White, V., Petrocelli, F. and Chadwick, D., 2011. Sour compression process for the removal of SOx and NOx from oxyfuel-derived CO2. Energy Procedia, 4, pp. 908-916.
Turner, I. G., Bowen, C. R., Baxter, F. R., Gittings, J. and Chaudhuri, J. B., 2011. The effect of poling on the in vitro response to poled HA and HABT composites for clinical applications. In: 24th European Conference on Biomaterials, EBS 2011, 2011-09-04 - 2011-09-08.
Wadsworth, W. J., Grogan, M. D. W., Xiao, L. M., Rollings, M. D., England, R. and Birks, T. A., 2011. Aerogel-enhanced tapers and fibres. In: 2011 IEEE Winter Topicals, WTM 2011. Piscataway, NJ: IEEE Computer Society, pp. 193-194.
Wenk, J., Von Gunten, U. and Canonica, S., 2011. Effect of dissolved organic matter on the transformation of contaminants induced by excited triplet states and the hydroxyl radical. Environmental Science and Technology, 45 (4), pp. 1334-1340.
Willcocks, A. M., Gilbank, A., Richards, S. P., Brayshaw, S. K., Kingsley, A. J., Odedra, R. and Johnson, A. L., 2011. Synthesis and structure of 6-aminofulvene-2-aldiminate complexes. Inorganic Chemistry, 50 (3), pp. 937-948.
Wols, B. A., Hofman, J. A. M. H., Beerendonk, E. F., Uijttewaal, W. S. J. and Van Dijk, J. C., 2011. A systematic approach for the design of UV reactors using computational fluid dynamics. AIChE Journal, 57 (1), pp. 193-207.
Wu, X., Jones, M. D., Davidson, M. G., Chaudhuri, J. B. and Ellis, M. J., 2011. Surfactant-free poly(lactide-co-glycolide) honeycomb films for tissue engineering: relating solvent, monomer ratio and humidity to scaffold structure. Biotechnology Letters, 33 (2), pp. 423-430.
Young, A., Venditti, S., Berrueco, C., Yang, M., Waters, A., Davies, H., Hill, S., Millan, M. and Crittenden, B. D., 2011. Characterization of crude oils and their fouling deposits using a batch stirred cell system. Heat Transfer Engineering, 32 (3-4), pp. 216-227.
Yu, S., Mays, T. J. and Dunn, R. W., 2011. Long-term hydrogen storage approach for 5MW micro-power generator using wind turbines. In: Bourkas, P., ed. IASTED International Conference on Power and Energy Systems, EuroPES 2011, 2011-06-22 - 2011-06-24. Anaheim, CA: ACTA Press, pp. 267-273.
2010
Ali, A. M., Emanuelsson, E. A. C. and Patterson, D. A., 2010. Photocatalysis with nanostructured zinc oxide thin films: the relationship between morphology and photocatalytic activity under oxygen limited and oxygen rich conditions and evidence for a Mars Van Krevelen mechanism. Applied Catalysis B: Environmental, 97 (1-2), pp. 168-181.
Alvarez, P. M., Jaramillo, J., Lopez-Pinero, F. and Plucinski, P. K., 2010. Preparation and characterization of magnetic TiO2 nanoparticles and their utilization for the degradation of emerging pollutants in water. Applied Catalysis B: Environmental, 100 (1-2), pp. 338-345.
Ang, S. M. C., Brett, D.J.L. and Fraga, E.S., 2010. Optimal design of fuel cell systems. In: Johnson, A.E. and Williams, E.C., eds. Fuel Cell Efficiency. Nova Science Publishers, Inc., pp. 193-252. (Energy Science, Engineering and Technology)
Ang, S. M. C., Brett, D. J. L. and Fraga, E. S., 2010. A model for the multi-objective optimisation of a polymer electrolyte fuel cell micro-combined heat and power system. Computer Aided Chemical Engineering, 28, pp. 949-954.
Ang, S. M. C., Brett, D. J. L. and Fraga, E. S., 2010. A multi-objective optimisation model for a general polymer electrolyte membrane fuel cell system. Journal of Power Sources, 195 (9), pp. 2754-2763.
Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2010. Modeling heat exchanger performance for non-Newtonian fluids. Journal of Food Process Engineering, 33 (6), pp. 1010-1035.
Bannister, C. D., Chuck, C. J., Hawley, J. G., Price, P. and Chrysafi, S. S., 2010. Factors affecting the decomposition of biodiesel under simulated engine sump oil conditions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224 (7), pp. 927-940.
Bannister, C. D., Hawley, J. G., Ali, H. M., Chuck, C. J., Price, P., Chrysafi, S. S., Brown, A. and Pickford, W., 2010. The impact of biodiesel blend ratio on vehicle performance and emissions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224 (3), pp. 405-421.
Birks, T. A., Grogan, M. D. W., Xiao, L. M., Rollings, M. D., England, R. and Wadsworth, W. J., 2010. Silica aerogel in optical fibre devices. In: 12th International Conference on Transparent Optical Networks, ICTON 2010. IEEE.
Charalambous, M., Cowley, M., Geoghegan, F., Smith, F. M., Radford, E. J., Marlow, B. P., Graham, C. F., Hurst, L. D. and Ward, A., 2010. Maternally-inherited Grb10 reduces placental size and efficiency. Developmental Biology, 337 (1), pp. 1-8.
Chigada, P. I., Wang, J., Al-Duri, B., Wood, J. and Rigby, S. P., 2010. Modelling of pore structure evolution during catalyst deactivation and comparison with experiment. Chemical Engineering Science, 65 (20), pp. 5550-5558.
Chua, L. M., 2010. Deactivation of PtH-ZSM-5 Bifunctional Catalysts by Coke Formation during Benzene Alkylation with Ethane. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Chua, L. M., Vazhnova, T., Mays, T. J., Lukyanov, D. B. and Rigby, S. P., 2010. Deactivation of PtH-MFI bifunctional catalysts by coke formation during benzene alkylation with ethane. Journal of Catalysis, 271 (2), pp. 401-412.
Chuck, C. J., Bannister, C. D., Hawley, J. G. and Davidson, M. G., 2010. Spectroscopic sensor techniques applicable to real-time biodiesel determination. Fuel, 89 (2), pp. 457-461.
Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2010. A theoretical method to improve and optimize the design of bioartificial livers. Biotechnology and Bioengineering, 106 (6), pp. 980-988.
Di Lorenzo, M., Scott, K., Curtis, T. P. and Head, I. M., 2010. Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell. Chemical Engineering Journal, 156 (1), pp. 40-48.
Ellis, M. J., Forsey, R. and Chaudhuri, J. B., 2010. Post-culture treatment protocols for PLGA membrane scaffolds. Biotechnology Letters, 32 (2), pp. 215-222.
Eslava, S., Hengesbach, F., McPartlin, M. and Wright, D.S., 2010. Heterometallic cobalt(ii)-titanium(iv) oxo cages; Key building blocks for hybrid materials. Chemical Communications, 46 (26), pp. 4701-4703.
Eslava, S., McPartlin, M., Thomson, R.I., Rawson, J.M. and Wright, D.S., 2010. Single-source materials for metal-doped titanium oxide:Syntheses, structures, and properties of a series of heterometallic transition-metal titanium oxo cages. Inorganic Chemistry, 49 (24), pp. 11532-11540.
Eslava, S., Papageorgiou, A.C., Beaumont, S.K., Kyriakou, G., Wright, D.S. and Lambert, R.M., 2010. Synthesis, characterization, and surface tethering of sulfide- functionalized Ti-oxo-alkoxy cages. Chemistry of Materials, 22 (18), pp. 5174-5178.
Eslava, S., Seo, J.W., Kirschhock, C.E.A., Baklanov, M.R., Maex, K. and Martens, J.A., 2010. Comment on MEL-type pure-silica zeolite nanocrystals prepared by an evaporation-assisted two-stage synthesis method as ultra-low-k materials. Advanced Functional Materials, 20 (15), pp. 2377-2379.
Evans, P. J. and Bird, M. R., 2010. The role of black tea feed conditions upon ultrafiltration performance during membrane fouling and cleaning. Journal of Food Process Engineering, 33 (2), pp. 309-332.
Fan, X., 2010. Selective Catalytic Hydrogenation in a Structured Compact Multifunctional Reactor. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Wilson, D. I. and York, D. W., 2010. Studies into the swelling of gelatine films using a scanning fluid dynamic gauge. Food and Bioproducts Processing, 88 (C4), pp. 357-364.
Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Wilson, D. I. and York, D. W., 2010. A scanning fluid dynamic gauging technique for probing surface layers. Measurement Science & Technology, 21 (8), 085103.
Greaves, M. and Xia, T. X., 2010. Laboratory studies of producing hydrogen and incremental oil from light oil reservoirs using downhole gasification. Journal of Canadian Petroleum Technology, 49 (3), pp. 65-70.
Grogan, M. D. W., Leon-Saval, S. G., England, R. and Birks, T., 2010. Silica aerogel core waveguide. Optics Express, 18 (21), pp. 22497-22502.
Grogan, M. D. W., Rollings, M. D., Xiao, L., Wadsworth, W. J., England, R., Maier, S. A. and Birks, T. A., 2010. Plasmonic aerogel doped with gold nanoparticles. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).
Hitchcock, I., Chudek, J. A., Holt, E. M., Lowe, J. P. and Rigby, S. P., 2010. NMR Studies of Cooperative Effects in Adsorption. Langmuir, 26 (23), pp. 18061-18070.
Hooper, L. E., Mosley, P. J., Muir, A. C., Wadsworth, W. J. and Knight, J. C., 2010. All-normal dispersion photonic crystal fiber for coherent supercontinuum generation. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. Washington DC: Optical Society of America (OSA).
Jones, S. A., Chew, Y. M. J., Bird, M. R. and Wilson, D. I., 2010. The application of fluid dynamic gauging in the investigation of synthetic membrane fouling phenomena. Food and Bioproducts Processing, 88 (4), pp. 409-418.
Kolaczkowski, S., 2010. Apparatus and Process For Use In Three-Phase Catalytic Reactions. C07C45/29- US2010010269 (A1), 14 January 2010.
Kraemer, M., Chaudhuri, J., De Bank, P. and Ellis, M., 2010. Aligned Neurite Outgrowth on Electrospun PLGA Nanofibres. In: Tissue and Cell Engineering Society 2010 Conference, 2010-07-28 - 2010-07-30.
Lamb, G. W., Al Badran, F. A., Williams, J. M. J. and Kolaczkowski, S. T., 2010. Production of pharmaceuticals: amines from alcohols in a continuous flow fixed bed catalytic reactor. Chemical Engineering Research & Design, 88 (12), pp. 1533-1540.
Lee, Y. S., Lowe, J. P., Gilby, E., Perera, S. P. and Rigby, S. P., 2010. The initial release of cisplatin from poly(lactide-co-glycolide) microspheres. International Journal of Pharmaceutics, 383 (1-2), pp. 244-254.
Loponov, K., Goller, B., Moskalenko, A., Kovalev, D. and Lapkin, A., 2010. Efficiency of porous silicon photosensitizer in the singlet oxygen-mediated oxidation of organic compounds. Journal of Photochemistry and Photobiology A Chemistry, 211 (1), pp. 74-77.
Mangan, B. J., Muir, A. C. and Knight, J. C., 2010. Photonic bandgap fiber with multiple hollow cores. Journal of Lightwave Technology, 28 (9), pp. 1287-1290.
Marino, H., 2010. Phase inversion temperature emulsification: from batch to continuous process. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Mattia, D., 2010. Wetting phenomena inside carbon nanotubes. In: Starov, V. M., ed. Nanoscience: Colloidal and Interfacial Aspects. CRC Press. (Surfactant Science)
McFarlane, C. J., Emanuelsson, E. A. C., Ali, A. M., Gao, W. and Patterson, D. A., 2010. Understanding the rate, mechanism and reuseability of zinc oxide nanostructured films as photocatalysts for industrial tastewater treatment. International Journal of Chemical Engineering, 2 (2), pp. 63-79.
Mcclymont, D., Kolaczkowski, S. T. and Molloy, K. C., 2010. Catalyst system design for the control of NOx using hydrogen. In: DTC Summer Showcase 2010, 2010-07-08 - 2010-07-09.
Mellors, R., Benzeval, I., Eisenthal, R. and Hubble, J., 2010. Preparation of self-assembled microspheres and their potential for drug delivery. Pharmaceutical Development and Technology, 15 (1), pp. 105-111.
Minett, D., Mattia, D., Jones, M. and Johnson, A., 2010. Synthesis of catalytic species for the conversion of hydrogen to useful feedstocks using carbon nanotubes as a support. In: Chemical Science & Technology towards a Low-Carbon Economy, 2010-10-09.
Moreno, T., Garcia-Serna, J., Plucinski, P., Sanchez-Montero, M. J. and Cocero, M. J., 2010. Direct synthesis of H2O2 in methanol at low pressures over Pd/C catalyst: Semi-continuous process. Applied Catalysis A General, 386 (1-2), pp. 28-33.
Perkins, E., Lowe, J., Edler, K. and Rigby, S., 2010. Studies of structure-transport relationships in biodegradable polymer microspheres for drug delivery using NMR cryodiffusometry. Chemical Engineering Science, 65 (2), pp. 611-625.
Polisski, S., Goller, B., Wilson, K., Kovalev, D., Zaikowskii, V. and Lapkin, A., 2010. In situ synthesis and catalytic activity in CO oxidation of metal nanoparticles supported on porous nanocrystalline silicon. Journal of Catalysis, 271 (1), pp. 59-66.
Pourbafrani, M., Forgacs, G., Sárvári Horváth, I., Niklasson, C. and Taherzadeh, M. J., 2010. Production of biofuels, limonene and pectin from citrus wastes. Bioresource Technology, 101 (11), pp. 4246-4250.
Rashidi, H., Ellis, M. J., Cartmell, S. H. and Chaudhuri, J. B., 2010. Simvastatin release from poly(lactide-co-glycolide) membrane scaffolds. Polymers, 2 (4), pp. 709-718.
Rigby, S. P. and Chigada, P. I., 2010. MF-DFT and experimental investigations of the origins of Hysteresis in Mercury porosimetry of Silica materials. Langmuir, 26 (1), pp. 241-248.
Rollings, M. D., Grogan, M. D. W., Xiao, L. M., England, R., Birks, T. A. and Wadsworth, W. J., 2010. Supercontinuum generation in tapered fibres embedded in silica aerogel. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).
Saidi, O., Bamford, M. J., Blacker, A. J., Lynch, J., Marsden, S. P., Plucinski, P., Watson, R. J. and Williams, J. M. J., 2010. Iridium-catalyzed formylation of amines with paraformaldehyde. Tetrahedron Letters, 51 (44), pp. 5804-5806.
Saidi, O., Blacker, A. J., Lamb, G. W., Marsden, S. P., Taylor, J. E. and Williams, J. M. J., 2010. Borrowing hydrogen in water and ionic liquids: iridium-catalyzed alkylation of amines with alcohols. Organic Process Research & Development, 14 (4), pp. 1046-1049.
Saikhwan, P., Mercade-Prieto, R., Chew, Y. M. J., Gunasekaran, S., Paterson, W. R. and Wilson, D. I., 2010. Swelling and dissolution in cleaning of whey protein gels. Food and Bioproducts Processing, 88 (C4), pp. 375-383.
Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2010. Experimental optimization of catalytic process in-situ for heavy oil and bitumen upgrading. In: Canadian Unconventional Resources and International Petroleum Conference 2010, October 19, 2010 - October 21, 2010, 2010-10-19 - 2010-10-21.
Shah, A., Fishwick, R., Wood, J., Leeke, G., Rigby, S. and Greaves, M., 2010. A review of novel techniques for heavy oil and bitumen extraction and upgrading. Energy & Environmental Science, 3 (6), pp. 700-714.
Sharma, R. I. and Snedeker, J. G., 2010. Biochemical and biomechanical gradients for directed bone marrow stromal cell differentiation toward tendon and bone. Biomaterials, 31 (30), pp. 7695-7704.
Shearer, C., Velleman, L., Acosta, F., Ellis, A., Voelcker, N., Mattia, D. and Shapter, J., 2010. Water transport through nanoporous materials: Porous silicon and single walled carbon nanotubes. In: ICONN 2010 - Proceedings of the 2010 International Conference on Nanoscience and Nanotechnology. Piscataway, NJ: IEEE Computer Society, pp. 196-199.
Shipley, R. J., Waters, S. L. and Ellis, M. J., 2010. Definition and validation of operating equations for poly(vinyl alcohol)-poly(lactide-co-glycolide) microfiltration membrane-scaffold bioreactors. Biotechnology and Bioengineering, 107 (2), pp. 382-392.
Skouteris, G. S., 2010. Low Energy Membrane Bioreactors for Decentralised Waste Water Treatment. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Storm, M. P., Orchard, C. B., Bone, H. K., Chaudhuri, J. B. and Welham, M. J., 2010. Three-dimensional culture systems for the expansion of pluripotent embryonic stem cells. Biotechnology and Bioengineering, 107 (4), pp. 683-695.
Ting, V. P., Henry, P. F., Kohlmann, H., Wilson, C. C. and Weller, M. T., 2010. Structural isotope effects in metal hydrides and deuterides. Physical Chemistry Chemical Physics, 12 (9), pp. 2083-2088.
Ting, V. P., Schmidtmann, M., Henry, P. F., Dann, S. E., Crisp, J. L., Wilson, C. C. and Weller, M. T., 2010. The kinetics of bulk hydration of the disaccharides α-lactose and trehalose by in situ neutron powder diffraction. MedChemComm, 1 (5), pp. 345-348.
Ting, V. P., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2010. Cisplatin: polymorphism and structural insights into an important chemotherapeutic drug. Angewandte Chemie-International Edition, 49 (49), pp. 9408-9411.
Torrente Murciano, L., Chadwick, D., White, V. and Petrocelli, F., 2010. Sour Compression process for the removal of SOx and NOS from oxyfuel derived CO2. In: 10th International Conference on Greenhouse Gas Control Technologies, 2010-09-01.
Torrente-Murciano, L., Lapkin, A., Nielsen, D. J., Fallis, I. and Cavell, K. J., 2010. Telomerisation of long-chain dienes with alcohols using Pd(IMes)(dvds) catalyst. Green Chemistry, 12 (5), pp. 866-869.
Torrente-Murciano, L., Lapkin, A. A. and Chadwick, D., 2010. Synthesis of high aspect ratio titanate nanotubes. Journal of Materials Chemistry, 20 (31), pp. 6484-6489.
White, J. R., Price, G. J., Schiffers, S., Raithby, P. R., Plucinski, P. K. and Frost, C. G., 2010. A modular approach to catalytic synthesis using a dual-functional linker for Click and Suzuki coupling reactions. Tetrahedron Letters, 51 (30), pp. 3913-3917.
White, V., Torrente Murciano, L., Sturgeon, D. and Chadwick, D., 2010. Purification of oxyfuel-derived CO(2). International Journal of Greenhouse Gas Control, 4 (2), pp. 137-142.
Wols, B. A., Hofman, J. A. M. H., Uijttewaal, W. S. J., Rietveld, L. C. and van Dijk, J. C., 2010. Evaluation of different disinfection calculation methods using CFD. Environmental Modelling and Software, 25 (4), pp. 573-582.
Wols, B. A., Shao, L., Uijttewaal, W. S. J., Hofman, J. A. M. H., Rietveld, L. C. and van Dijk, J. C., 2010. Evaluation of experimental techniques to validate numerical computations of the hydraulics inside a UV bench-scale reactor. Chemical Engineering Science, 65 (15), pp. 4491-4502.
Wols, B. A., Uijttewaal, W. S. J., Hofman, J. A. M. H., Rietveld, L. C. and van Dijk, J. C., 2010. The weaknesses of a k-e{open} model compared to a large-eddy simulation for the prediction of UV dose distributions and disinfection. Chemical Engineering Journal, 162 (2), pp. 528-536.
Wu, D. and Bird, M. R., 2010. The interaction of protein and polyphenol species in ready to drink black tea liquor production. Journal of Food Process Engineering, 33 (3), pp. 481-505.
Xiao, L., Grogan, M. D. W., England, R., Wadsworth, W. J. and Birks, T. A., 2010. Aerogel package for fused fibre couplers. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).
Xiao, L., Grogan, M. D. W., England, R., Wadsworth, W. J. and Birks, T. A., 2010. Gas sensing with a sub-micron tapered fibre embedded in hydrophobic aerogel. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).
Yu, S., Mays, T. J. and Dunn, R. W., 2010. Hydrogen energy storage in isolated microgrids with wind generation. In: 2010 45th International Universities' Power Engineering Conference, UPEC 2010. Piscataway, NJ: IEEE Computer Society.
Zou, C. W., Rao, Y. F., Alyamani, A., Chu, W., Chen, M. J., Patterson, D. A., Emanuelsson, E. A. C. and Gao, W., 2010. Heterogeneous lollipop-like V2O5/ZnO array: A promising composite nanostructure for visible light photocatalysis. Langmuir, 26 (14), pp. 11615-11620.
Zou, C. W., Yan, X. D., Patterson, D. A., Emanuelsson, E. A. C., Bian, J. M. and Gao, W., 2010. Temperature sensitive crystallization of V2O5: from amorphous film to β-V2O5nanorods. CrystEngComm, 12 (3), pp. 691-693.
2009
Allen, C. L., Lapkin, A. A. and Williams, J. M. J., 2009. An iron-catalysed synthesis of amides from nitriles and amines. Tetrahedron Letters, 50 (29), pp. 4262-4264.
Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2009. Exploring CFD Solutions for Coexisting Flow Regimes in a T-Piece. Chemical Engineering & Technology, 32 (6), pp. 948-955.
Bannister, C., Hawley, J. G., Ali, H., Chuck, C. and Price, P., 2009. Quantifying the effects of biodiesel blend ratio, at varying ambient temperatures, on vehicle performance and emissions. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 2009-06-15 - 2009-06-17.
Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J., 2009. A study of the morphology of human bone cells cultured on hydroxyapatite-barium titanate composites. In: Proceedings of the European Society of Biomaterials, 2009-09-01.
Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J. B., 2009. Piezoelectric Hydroxyapatite Composites for Bone Graft Substitution. In: Proceedings of the UK Society for Biomaterials, 2009-07-02 - 2009-07-03.
Baxter, F., Turner, I. G., Bowen, C. R., Gittings, J. P. and Chaudhuri, J. B., 2009. An in vitro study of electrically active hydroxyapatite-barium titanate ceramics using Saos-2 cells. Journal of Materials Science: Materials in Medicine, 20 (8), pp. 1697-1708.
Benzeval, I., 2009. Development of responsive polymers for drug delivery applications. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Cao, E., Greaves, M. and Rigby, S. P., 2009. Paper 2009-048: Phase Properties of Mobile Oil Zone in the THAI™- CAPRI™ Process. In: Canadian International Petroleum Conference, 2009-06-16 - 2009-06-18.
Chaudhuri, J., Jarman-Smith, M. and Stewart, K., 2009. Bioreactors for Tissue Engineering. C12M1/40- WO2009037462 (A1), 26 March 2009.
Chuck, C. J., Bannister, C. D., Hawley, J. G., Davidson, M. G., La Bruna, I. and Paine, A., 2009. Predictive model to assess the molecular structure of biodiesel fuel. Energy & Fuels, 23 (4), pp. 2290-2294.
Crittenden, B. D., Kolaczkowski, S. T., Takemoto, T. and Phillips, D. Z., 2009. Crude Oil Fouling in a Pilot-Scale Parallel Tube Apparatus. Heat Transfer Engineering, 30 (10-11), pp. 777-785.
De Bank, P., Jones, M. and Ellis, M., 2009. Polymeric scaffolds for regenerative medicine. In: Mattiasson, B., Kumar, A. and Galaev, I. Y., eds. Macroporous Polymers: Production Properties and Biotechnological/Biomedical Applications. CRC Press, pp. 467-495.
Di Lorenzo, M., Curtis, T. P., Head, I. M. and Scott, K., 2009. A single-chamber microbial fuel cell as a biosensor for wastewaters. Water Research, 43 (13), pp. 3145-3154.
Di Lorenzo, M., Curtis, T. P., Head, I. M., Velasquez-Orta, S. B. and Scott, K., 2009. A single chamber packed bed microbial fuel cell biosensor for measuring organic content of wastewater. Water Science & Technology, 60 (11), pp. 2879-2887.
Di Lorenzo, M., Scott, K., Curtis, T. P., Katuri, K. P. and Head, I. M., 2009. Continuous feed microbial fuel cell using an air cathode and a disc anode stack for wastewater treatment. Energy & Fuels, 23 (11), pp. 5707-5716.
Dyan, A., Duchateau, G., Eslava, S., Stehle, J.L., Damiani, D. and Piombini, H., 2009. Transmission measurements in rapid growth KDP and DKDP crystals. Journal of Modern Optics, 56 (1), pp. 45-49.
Elfeky, S. A., D'Hooge, F., Poncel, L., Chen, W. B., Perera, S. P., van den Elsen, J. M. H., James, T. D., Jenkins, A. T. A., Cameron, P. J. and Fossey, J. S., 2009. A surface plasmon enhanced fluorescence sensor platform. New Journal of Chemistry, 33 (7), pp. 1466-1469.
Elhweg, B., Burns, I. W., Chew, Y. M. J., Martin, P. J., Russell, A. B. and Wilson, D. I., 2009. Viscous dissipation and apparent wall slip in capillary rheometry of ice cream. Food and Bioproducts Processing, 87 (C4), pp. 266-272.
Eslava, S., Kirschhock, C.E.A., Aldea, S., Baklanov, M.R., Iacopi, F., Maex, K. and Martens, J.A., 2009. Characterization of spin-on zeolite films prepared from Silicalite-1 nanoparticle suspensions. Microporous and Mesoporous Materials, 118 (1-3), pp. 458-466.
Evans, P. J., Bird, M. R., Rogers, D. and Wright, C. J., 2009. Measurement of polyphenol-membrane interaction forces during the ultrafiltration of black tea liquor. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 335 (1-3), pp. 148-153.
Evbuomwan, I., 2009. The structural characterisation of porous media for use as model reservoir rocks, adsorbents and catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Fan, X. L., Lapkin, A. A. and Plucinski, P. K., 2009. Liquid phase hydrogenation in a structured multichannel reactor. Catalysis Today, 147 (Supplement), S313-S318.
Fan, X. L., Manchon, M. G., Wilson, K., Tennison, S., Kozynchenko, A., Lapkin, A. A. and Plucinski, P. K., 2009. Coupling of Heck and hydrogenation reactions in a continuous compact reactor. Journal of Catalysis, 267 (2), pp. 114-120.
Forsey, R. W. and Chaudhuri, J. B., 2009. Validity of DNA analysis to determine cell numbers in tissue engineering scaffolds. Biotechnology Letters, 31 (6), pp. 819-823.
Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R., Cartmell, S. and Chaudhuri, J., 2009. Influence of porosity on polarisation and electrical properties of hydroxyapatite based ceramics. Ferroelectrics, 390 (1), pp. 168-176.
Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2009. Electrical characterization of hydroxyapatite-based bioceramics. Acta Biomaterialia, 5 (2), pp. 743-754.
Greaves, M., Turta, A. and Xia, T. X., 2009. Paper 2009-346: Shape of the Burned Zone and Volumetric Sweep in THAI™ Process. In: World Heavy Oil Congress, 2009-11-03 - 2009-11-05.
Grogan, M.D.W., Leon-Saval, S.G., Williams, R., England, R. and Birks, T.A., 2009. Optical fibre with an aerogel-filled core. In: Conference on Lasers and Electro-Optics, CLEO 2009, 2009-05-31 - 2009-06-05, Baltimore.
Gu, T., Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2009. Experimental and CFD studies of fluid dynamic gauging in annular flows. AIChE Journal, 55 (8), pp. 1937-1947.
Gu, T., Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2009. Experimental and CFD studies of fluid dynamic gauging in duct flows. Chemical Engineering Science, 64 (2), pp. 219-227.
Hamid, M. H. S. A., Allen, C. L., Lamb, G. W., Maxwell, A. C., Maytum, H. C., Watson, A. J. A. and Williams, J. M. J., 2009. Ruthenium-catalyzed N-alkylation of amines and sulfonamides using borrowing hydrogen methodology. Journal of the American Chemical Society, 131 (5), pp. 1766-1774.
Hart, J. N., Parker, S. C. and Lapkin, A. A., 2009. Energy Minimization of Single-Walled Titanium Oxide Nanotubles. ACS Nano, 3 (11), pp. 3401-3412.
Herdes, C. and Sarkisov, L., 2009. Computer simulation of volatile organic compound adsorption in atomistic models of molecularly imprinted polymers. Langmuir, 25 (9), pp. 5352-5359.
Iwan, A., Stephenson, H., Ketchie, W. C. and Lapkin, A., 2009. High temperature sequestration of CO2 using lithium zirconates. Chemical Engineering Journal, 146 (2), pp. 249-258.
Kolaczkowski, S. T., Asli, U. A. and Davidson, M. G., 2009. A new heterogeneous ZnL2 catalyst on a structured support for biodiesel production. Catalysis Today, 147 (Supplement), S220-S224.
Lamb, G. W., Watson, A. J. A., Jolley, K. E., Maxwell, A. C. and Williams, J. M., 2009. Borrowing hydrogen methodology for the conversion of alcohols into N-protected primary amines and in situ deprotection. Tetrahedron Letters, 50 (26), pp. 3374-3377.
Lapkin, A., Chen, H. and Ding, Y., 2009. Rheological behaviour of nanofluids containing tube / rod-like nanoparticles. Powder Technology, 194 (1-2), pp. 132-141.
Lapkin, A. A., Walker, A., Sullivan, N., Khambay, B., Mlambo, B. and Chemat, S., 2009. Development of HPLC analytical protocols for quantification of artemisinin in biomass and extracts. Journal of Pharmaceutical and Biomedical Analysis, 49 (4), pp. 908-915.
Laska, U., Frost, C. G., Price, G. J. and Plucinski, P. K., 2009. Easy-separable magnetic nanoparticle-supported Pd catalysts: Kinetics, stability and catalyst re-use. Journal of Catalysis, 268 (2), pp. 318-328.
Lin, X., Telepeni, I., Blake, A. J., Dailly, A., Brown, C. M., Simmons, J. M., Zoppi, M., Walker, G. S., Thomas, K. M., Mays, T. J., Hubberstey, P., Champness, N. R. and Schroder, M., 2009. High capacity hydrogen adsorption in Cu(II) tetracarboxylate framework materials: the role of pore size, ligand functionalization, and exposed metal sites. Journal of the American Chemical Society, 131 (6), pp. 2159-2171.
Lukyanov, D. B. and Vazhnova, T., 2009. Selective and stable benzene alkylation with methane into toluene over PtH-MFI bifunctional catalyst. Journal of Molecular Catalysis A: Chemical, 305 (1-2), pp. 95-99.
Meneghello, G., Parker, D. J., Ainsworth, B. J., Perera, S. P., Chaudhuri, J. B., Ellis, M. J. and De Bank, P. A., 2009. Fabrication and characterization of poly(lactic-co-glycolic acid)/polyvinyl alcohol blended hollow fibre membranes for tissue engineering applications. Journal of Membrane Science, 344 (1-2), pp. 55-61.
Morgan, S. M., Ainsworth, B. J., Kanczler, J. M., Babister, J. C., Chaudhuri, J. B. and Oreffo, R. O. C., 2009. Formation of a human-derived fat tissue layer in PDLLGA hollow fibre scaffolds for adipocyte tissue engineering. Biomaterials, 30 (10), pp. 1910-1917.
Nigo, R. Y., Chew, Y. M. J., Houghton, N. E., Paterson, W. R. and Wilson, D. I., 2009. Experimental studies of freezing fouling of model food fat solutions using a novel spinning disc apparatus. Energy & Fuels, 23 (12), pp. 6131-6145.
Patterson, D. A., Havill, A., Costello, S., See-Toh, Y. H., Livingston, A. G. and Turner, A., 2009. Membrane characterisation by SEM, TEM and ESEM: the implications of dry and wetted microstructure on mass transfer through integrally skinned polyimide nanofiltration membranes. Separation and Purification Technology, 66 (1), pp. 90-97.
Perkins, E., 2009. Nuclear Magnetic Resonance studies of controlled drug release devices. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Polisski, S., Goller, B., Lapkin, A. and Kovalev, D., 2009. Hybrid metal/silicon nanocomposite systems and their catalytic activity. Physica Status Solidi (C), 6 (7), pp. 1575-1579.
Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2009. Control of polyaniline deposition on microporous cellulose ester membranes by in situ chemical polymerization. Journal of Physical Chemistry B, 113 (45), pp. 14986-14993.
Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2009. Polyaniline deposition site control on microporous mixed cellulose ester membranes:Surface and in-pore polymerization. IOP Conference Series: Materials Science and Engineering, 4, 012009.
Rigby, S. P. and Chigada, P. I., 2009. Interpretation of integrated gas sorption and mercury porosimetry studies of adsorption in disordered networks using mean-field DFT. Adsorption, 15 (1), pp. 31-41.
Rossi, M., Sharma, R., Pawelski, E. and Moghe, P., 2009. Nanoparticles as biodynamic substrates for engineering cell fate. In: Rege, K. and Medintz, I., eds. Methods in Bioengineering: Nanoscale Bioengineering and Nanomedicine. Boston, MA.: Artech House, pp. 85-106.
Sanchez Liarte, F., 2009. Performance of electrically regenerable monolithic adsorbents for VOC control. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Shah, A., Fishwick, R., Wood, J., Leek, G., Greaves, M. and Rigby, S. P., 2009. A Review of Novel Techniques for Heavy Oil and Bitumen Extraction and Recovery. In: 8th World Congress of Chemical Engineering, 2009-08-23 - 2009-08-27.
Shipley, R. J. and Ellis, M. J., 2009. Characterization of fluid and protein transport properties in hollow fibre membrane scaffolds. European Cells and Materials, 18 (Supplement 2), p. 40.
Shipley, R. J. and Ellis, M. J., 2009. PLGA hollow fibre membrane scaffolds and serum protein interactions. European Cells and Materials, 18 (Supplement 2), p. 62.
Sim Lee, Y., 2009. The development of controlled-chemotherapy drug delivery system. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Ting, V. P., Henry, P. F., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2009. In situ neutron powder diffraction and structure determination in controlled humidities. Chemical Communications, 2009 (48), pp. 7527-7529.
Torrente Murciano, L. and Chadwick, D., 2009. Direct Synthesis of H2O2 over Au-Pd catalysts for selective oxidation. In: IX Europacat, 2009-09-01.
Torrente Murciano, L. and Chadwick, D., 2009. Direct synthesis of H2O2 for green selective oxidation. In: 6th World Congress on Oxidation Catalysis, 2009-07-01.
Torrente Murciano, L., Chadwick, D., White, V. and Petrocelli, F., 2009. Removal of SOz and NOx from oxyfuel-derived CO2. In: 1st Oxyfuel Conference, 2009-09-01.
Torrente-Murciano, L., White, V. and Chadwick, D., 2009. Removal of SOx and NOx from oxyfuel-derived CO2. In: 1st Oxyfuel Combustion Conference, 2009-09-08 - 2009-09-11.
Turta, A. T., Coates, R. and Greaves, M., 2009. Paper 2009-150: In-Situ Combustion in Oil Reservoirs Underlain by Bottom Water. Review of the Field and Laboratory Tests. In: Canadian International Petroleum Conference, 2009-06-16 - 2009-06-18.
Turta, A. T., Singhal, A. K., Xia, T. X., Greaves, M., Goldman, J. and Ivory, J., 2009. Preliminary considerations on application of steamflooding in a toe-to-heel configuration. Journal of Canadian Petroleum Technology, 48 (11), pp. 41-50.
Wang, J., Hassan, F., Chigada, P. I., Rigby, S. P., Al-Duri, B. and Wood, J., 2009. Coke Formation and Characterization During 1-Hexene Isomerization and Oligomerization over H-ZSM-5 Catalyst under Supercritical Conditions. Industrial & Engineering Chemistry Research, 48 (17), pp. 7899-7909.
Wanga, J., Chigada, P. I., Rigby, S. P., Al-Duri, B. and Wood, J., 2009. Prolonging catalyst lifetime in supercritical isomerization of 1-hexene over a platinum/alumina catalyst. Chemical Engineering Science, 64 (15), pp. 3427-3436.
Weller, M. T., Henry, P. F., Ting, V. P. and Wilson, C. C., 2009. Crystallography of hydrogen-containing compounds: realizing the potential of neutron powder diffraction. Chemical Communications, 2009 (21), pp. 2973-2989.
White, J.R., Price, G.J., Plucinski, P.K. and Frost, C.G., 2009. The rhodium-catalysed 1,2-addition of arylboronic acids to aldehydes and ketones with sulfonated S-Phos. Tetrahedron Letters, 50 (52), pp. 7365-7368.
White, V., Torrente-Murciano, L., Sturgeon, D. and Chadwick, D., 2009. Purification of oxyfuel-derived CO2. Energy Procedia, 1 (1), pp. 399-406.
Whittaker, R. J., Booth, R., Dyson, R., Bailey, C., Parsons Chini, L., Naire, S., Payvandi, S., Rong, Z., Woollard, H., Cummings, L. J., Waters, S. L., Mawasse, L., Chaudhuri, J. B., Ellis, M. J., Michael, V., Kuiper, N. J. and Cartmell, S., 2009. Mathematical modelling of fibre-enhanced perfusion inside a tissue-engineering bioreactor. Journal of Theoretical Biology, 256 (4), pp. 533-546.
Wong, K., 2009. Benzene alkylation with ethane into ethylbenzene over Pt-containing zeolite bifunctional catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Xiao, L. M., Grogan, M. D. W., Leon-Saval, S. G., Williams, R., England, R., Wadsworth, W. J. and Birks, T. A., 2009. Tapered fibers embedded in silica aerogel. Optics Letters, 34 (18), pp. 2724-2726.
Xiao, L., Grogan, M.D.W., Leon-Saval, S.G., Williams, R. J., England, R., Wadsworth, W.J. and Birks, T.A., 2009. Tapered fibres embedded in silica aerogel. In: Conference on Lasers and Electro-Optics, CLEO 2009, 2009-05-31 - 2009-06-05, Baltimore.
Yu, S., Benzeval, I., Bowyer, A. and Hubble, J., 2009. Preparation of pore-filled responsive membranes using dextran precipitation. Journal of Membrane Science, 339 (1-2), pp. 138-142.
Yu, S., Mays, T. J. and Dunn, R. W., 2009. A new methodology for designing hydrogen energy storage in wind power systems to balance generation and demand. In: 1st International Conference on Sustainable Power Generation and Supply, SUPERGEN '09. IEEE Computer Society, pp. 1-6.
2008
Arnot, T., 2008. Aerobic Membrane Bioreactor Technology. In: ProMembrane International Conference, 2008-05-04 - 2008-05-06.
Arnot, T., 2008. Design and Optimisation of Aerobic Membrane Bioreactors. In: ProMembrane International Conference, 2008-05-04 - 2008-05-06.
Arnot, T., 2008. Manipulation of Microbial Physiology in Membrane Bioreactors. In: International Symposium on Biotechnology, 2008-05-04 - 2008-05-08.
Arnot, T., Crittenden, B., Plucinski, P. and England, R., 2008. Submarine integrated waste management system. Unpublished.
Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J. P., Chaudhuri, J. B. and Lewis, R. W. C., 2008. The structure and properties of electroceramics for bone graft substitution. Key Engineering Materials, 361-363 I, pp. 99-102.
Baxter, F., Turner, I., Bowen, C., Chaudhuri, J. and Gittings, J. P., 2008. The attachment of osteoblast-like cells to hydroxyapatite-barium titanate ceramics. In: World Biomaterials Congress, 2008-05-25 - 2008-06-01.
Behler, K., Havel, M., Mattia, D. and Gogotsi, Y., 2008. Self-assembled Multi-walled Carbon Nanotube Coatings In Nanotubes and Related Nanostructures. Materials Research Society Symposium Proceedings, 1057E, pp. 1057-1120.
Bennett, C. A. and Crittenden, B. D., 2008. ACSAICHE 99128 Isokinetic phenomena in crude oil fouling. Abstracts of Papers of the American Chemical Society, 235.
Bennett, C. A. and Crittenden, B. D., 2008. Isokinetic phenomena in crude oil fouling. In: 235th ACS National Meeting, 2008-04-06 - 2008-04-10.
Burrows, A. D., Cassar, K., Düren, T., Friend, R. M. W., Mahon, M. F., Rigby, S. P. and Savarese, T. L., 2008. Syntheses, structures and properties of cadmium benzenedicarboxylate metal–organic frameworks. Dalton Transactions, 18, pp. 2465-2474.
Chaudhuri, J. B., Davidson, M. G., Ellis, M. J., Jones, M. D. and Wu, X. J., 2008. Fabrication of Honeycomb-Structured Poly(DL-lactide) and Poly[(DL-lactide)-co-glycolide)] Films and their Use as Scaffolds for Osteoblast-Like Cell Culture. Macromolecular Symposia, 272 (1), pp. 52-57.
Chen, H., Yang, W., He, Y., Ding, Y., Zhang, L., Tan, C., Lapkin, A. A. and Bavykin, D. V., 2008. Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids). Powder Technology, 183 (1), pp. 63-72.
Chigada, P. I. and Mann, R., 2008. A Network-of-Voids Model to Assess Wall Flow Patterns and Heat Transfer for Low Aspect Ratio Packed-Bed Reactors. International Journal of Chemical Reactor Engineering, 6, A84.
Christgen, B., Roche, I., Di Lorenzo, M., Scott, K. and Curtis, T. P., 2008. Advances in Microbial Fuel Cells through Cathode, Anode and Membrane Development. In: Fuel Cell Science and Technology, 2008-10-07 - 2008-10-08.
D'Hooge, F., Rogalle, D., Thatcher, M. J., Perera, S., van den Elsen, J. M. H., Jenkins, T. A., James, T. and Fossey, J., 2008. Polymerisation resistant synthesis of methacrylamido phenylboronic acids. Polymer, 49 (16), pp. 3362-3365.
Davidson, A., Al-Qallaf, B. and Das, D. B., 2008. Transdermal drug delivery by coated microneedles: Geometry effects on effective skin thickness and drug permeability. Chemical Engineering Research & Design, 86 (11A), pp. 1196-1206.
Di Lorenzo, M., Curtis, T. P. and Scott, K., 2008. Development of a single chamber microbial fuel cell as BOD sensor. In: Microbial Fuel Cell First International Symposium, 2008-05-19 - 2008-05-27.
Di Lorenzo, M., Curtis, T. P. and Scott, K., 2008. Development of a single chamber microbial fuel cell as biosensor of the organic content in wastewaters. In: Workshop on Biological Fuel Cells, 2008-07-23 - 2008-07-25.
Di Lorenzo, M., Velasquez-Orta, S., Christgen, B., Scott, K. and Curtis, T. P., 2008. Performance of the anode compartment when treating complex wastewaters. In: Microbial Fuel Cell First International Symposium, 2008-05-19 - 2008-05-27.
Ellis, M. J. and Chaudhuri, J. B., 2008. Human bone derived cell culture on PLGA flat sheet membranes of different lactide: Glycolide ratio. Biotechnology and Bioengineering, 101 (2), pp. 369-377.
Eslava, S., Baklanov, M.R., Neimark, A.V., Iacopi, F., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Evidence of large voids in pure-silica-zeolite low-k dielectrics synthesized by spin-on of nanoparticle suspensions. Advanced Materials, 20 (16), pp. 3110-3116.
Eslava, S., Baklanov, M.R., Urrutia, J., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Nanoporous organosilicate films prepared in acidic conditions using tetraalkylammonium bromide porogens. Advanced Functional Materials, 18 (20), pp. 3332-3339.
Eslava, S., Delahaye, S., Baklanov, M.R., Iacopi, F., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Reaction of trimethylchlorosilane in spin-on Silicalite-1 zeolite film. Langmuir, 24 (9), pp. 4894-4900.
Eslava, S., Eymery, G., Marsik, P., Iacopi, F., Kirschhock, C.E.A., Maex, K., Martens, J.A. and Baklanov, M.R., 2008. Optical property changes in low- k films upon ultraviolet-assisted curing. Journal of the Electrochemical Society, 155 (5).
Eslava, S., Iacopi, F., Urbanowicz, A.M., Kirschhock, C.E.A., Maex, K., Martens, J.A. and Baklanov, M.R., 2008. Ultraviolet-assisted curing of organosilicate glass low-k dielectric by excimer lamps. Journal of the Electrochemical Society, 155 (11).
Eslava, S., Urrutia, J., Busaworv, A.N., Baklanov, M.R., Iacopi, F., Aldea, S., Maex, K., Martens, J.A. and Kirschhock, C.E.A., 2008. Zeolite-inspired low-k dielectrics overcoming limitations of zeolite films. Journal of the American Chemical Society, 130 (51), pp. 17528-17536.
Evans, P. J., 2008. Membrane – Solute – Cleaning agent interaction during the ultrafiltration of black tea liquor. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Evans, P. J., Bird, M. R., Pihlajamaeki, A. and Nystroem, M., 2008. The influence of hydrophobicity, roughness and charge upon ultrafiltration membranes for black tea liquor clarification. Journal of Membrane Science, 313 (1-2), pp. 250-262.
Fan, X., Chen, H., Ding, Y., Plucinski, P. K. and Lapkin, A. A., 2008. Potential of nanofluids' to further intensify microreactors. Green Chemistry, 10 (6), pp. 670-677.
Gillard, I. C. and Mays, T. J., 2008. Hydrogen energy in the information age. In: 17th World Hydrogen Energy Conference 2008, WHEC 2008, 2008-06-14 - 2008-06-18.
Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2008. Polarisation behaviour of calcium phosphate based ceramics. In: Marques, A. T., Silva, A. F., Baptista, A. P. M., Sá, C., Alves, F. J. L., Malheiros, L. F. and Vieira, M., eds. Advanced Materials Forum IV: Materiais 2007. Zurich: Trans Tech Publications, pp. 91-95.
Goller, B., Polisski, S., Moskalenko, A., Loponov, K. and Kovalev, D., 2008. Photoexcited silicon nanocrystals as multifunctional spin-flip activator. ECS Transactions, 16 (3), pp. 337-344.
Greaves, M., Ayasse, C. and Turta, A. T., 2008. Paper 2008-330: In Situ Upgrading Potential of the CAPRI™ Process. In: World Heavy Oil Congress, 2008-03-10 - 2008-03-12.
Greaves, M. and Xia, T. X., 2008. Paper 2008-014: Producing Hydrogen and Incremental Oil from Light Oil Reservoirs Using Downhole Gasification. In: Canadian International Petroleum Conference, 2008-06-17 - 2008-06-19.
Greaves, M., Xia, T. X. and Turta, A. T., 2008. Stability of THAI™ process:Theoretical and experimental observations. Journal of Canadian Petroleum Technology, 47 (9), pp. 65-73.
Gribbon, C., Channon, K. J., Zhang, W., Banwell, E. F., Bromley, E. H. C., Chaudhuri, J. B., Oreffo, R. O. C. and Woolfson, D. N., 2008. MagicWand: a single, designed peptide that assembles to stable, ordered α-helical fibers. Biochemistry, 47 (39), pp. 10365-10371.
Jackson, T. R., Springall, J. S., Rogalle, D., Masurnoto, N., Li, H. C., D'Hooge, F., Perera, S. P., Jenkins, A. T. A., James, T. D., Fossey, J. S. and van den Elsen, J. M. H., 2008. Boronate affinity saccharide electrophoresis:A novel carbohydrate analysis tool. Electrophoresis, 29 (20), pp. 4185-4191.
Kolaczkowski, S., Robinson, K., Awdry, S. and Ye, S., 2008. Transient heat transfer studies on a catalytic convertor under non-reacting conditions. In: 5th International Conference on Environmental Catalysis, 2008-08-31 - 2008-09-03.
Kroon, M. C., Herdes, C. and Vega, L. F., 2008. Molecular simulation of selective paraffin adsorption from olefin/paraffin mixtures by aluminum methylphosphonate-a. In: 2008 AIChE Annual Meeting, AIChE 100, 2008-11-16 - 2008-11-21.
Lamb, G. W. and Williams, J. M. J., 2008. Borrowing hydrogen - C - N bond formation from alcohols. Chimica Oggi-Chemistry Today, 26 May-Jun (3), pp. 17-19.
Lanham, A. B., Reis, M. A. M. and Lemos, P. C., 2008. Kinetic and metabolic aspects of Defluviicoccus vanusrelated organisms as competitors in EBPR systems. In: Water Science and Technology.Vol. 58. 8 ed. , pp. 1693-1697. (Water Science and Technology; 58/8)
Lapkin, A., Boddu, V. M., Aliev, G. N., Goller, B., Polisski, S. and Kovalev, D., 2008. Photo-oxidation by singlet oxygen generated on nanoporous silicon in a LED-powered reactor. Chemical Engineering Journal, 136 (2-3), pp. 331-336.
Laska, U., Frost, C. G., Plucinski, P. K. and Price, G. J., 2008. Rhodium containing magnetic nanoparticles: effective catalysts for hydrogenation and the 1,4-addition of boronic acids. Catalysis Letters, 122 (1-2), pp. 68-75.
Lopez Munoz, M. J., Aguado, J., Cerro, L., Torrente-Murciano, L. and Lapkin, A. A., 2008. Synthesis and characterization of crystalline TiO2 through acid pre-treatment of titanate nanotubes. In: Simposio Iberoamericano de Catálisis (XXI SICAT), 2008-01-01.
Lukyanov, D. B. and Vazhnova, T., 2008. A kinetic study of benzene alkylation with ethane into ethylbenzene over bifunctional PtH-MFI catalyst. Journal of Catalysis, 257 (2), pp. 382-389.
Lukyanov, D. B. and Vazhnova, T., 2008. Highly selective and stable alkylation of benzene with ethane into ethylbenzene over bifunctional PtH-MFI catalysts. Journal of Molecular Catalysis A: Chemical, 279 (1), pp. 128-132.
Mattia, D. and Gogotsi, Y., 2008. Review: Static and dynamic behavior of liquids inside carbon nanotubes. Microfluidics and Nanofluidics, 5 (3), pp. 289-305.
Meneghello, G., Ainsworth, B., De Bank, P., Ellis, M. J. and Chaudhuri, J., 2008. Effect of polyvinyl alcohol and sodium hypochlorite on porosity and mechanical properties of PLGA hollow fibre membrane scaffolds. European Cells and Materials, 16 (S3), p. 82.
Meneghello, G., Ainsworth, B., De Bank, P., Ellis, M. and Chaudhuri, J., 2008. Effect of Polyvinyl Alcohol and Sodium Hypochlorite on Porosity and Mechanical Properties of PLGA Hollow Fibre Membrane Scaffolds. In: Tissue and Cell Engineering Society Annual Conference, 2014-07-02 - 2014-07-04, University of Newcastle.
Meneghello, G., Ainsworth, B., Perera, S., Chaudhuri, J., Ellis, M. and De Bank, P., 2008. Effect of Polyvinyl Alcohol and Sodium Hypochlorite on Porosity and Hydrophilicity of PLGA Hollow Fibre Membrane Scaffolds. In: TERMIS: tissue engineering and regenerative medicine international society, 2007-01-01.
Moghe, P. V., Sharma, R. and Pereira, M., 2008. Methods, Systems, and Compositions for Extracellular Matrix Production. A61K 8/18, A61Q 13/00, C12P 21/06, 2008.
Narvaez Dinamarca, A., Torrente Murciano, L. and Chadwick, D., 2008. CO2 conversion via one-step synthesis of dimethyl ether (DME). In: 5th International Conference on Environmental Catalysis, 2008-08-31 - 2008-09-03.
Patterson, D., Yenlau, L., Roengpithya, C., Gibbins, E. and Livingston, A., 2008. Membrane selectivity in the organic solvent nanofiltration of trialkylamine bases. Desalination, 218 (1-3), pp. 248-256.
Perkins, E. L., Lowe, J. P., Edler, K. J., Tanko, N. and Rigby, S. P., 2008. Determination of the percolation properties and pore connectivity for mesoporous solids using NMR cryodiffusometry. Chemical Engineering Science, 63 (7), pp. 1929-1940.
Polisski, S., Goller, B., Lapkin, A., Fairclough, S. and Kovalev, D., 2008. Synthesis and catalytic activity of hybrid metal/silicon nanocomposites. Physica Status Solidi: Rapid Research Letters, 2 (3), pp. 132-134.
Rigby, S. P., Chigada, P. I., Evbuomvan, I. O., Chudek, J. A., Miri, T., Wood, J. and Bakalis, S., 2008. Experimental and modelling studies of the kinetics of mercury retraction from highly confined geometries during porosimetry in the transport and the quasi-equilibrium regimes. Chemical Engineering Science, 63 (24), pp. 5771-5788.
Rigby, S. P., Fairhead, M. and van der Walle, C. F., 2008. Engineering silica particles as oral drug delivery vehicles. Current Pharmaceutical Design, 14 (18), pp. 1821-1831.
Rigby, S. P., Chigada, P. I., Perkins, E. L., Watt-Smith, M. J., Lowe, J. P. and Edler, K. J., 2008. Fundamental studies of gas sorption within mesopores situated amidst an inter-connected, irregular network. Adsorption, 14 (2-3), pp. 289-307.
Rippington, S., Cunningham, D. and England, R., 2008. Structure and petrology of the Altan Uul ophiolite: new evidence for a Late Carboniferous suture in the Gobi Altai, southern Mongolia. Journal of the Geological Society, 165 (3), pp. 711-723.
Sahoo, P. K., Chew, Y. M. J., Mercade-Prieto, R., Wilson, D. I. and Dai, X. W., 2008. Fluid dynamic gauging studies of swelling behaviour of whey protein gels in NaOH/NaCl solutions. International Journal of Food Science and Technology, 43 (10), pp. 1901-1907.
Shah, H. J., Fontecchio, A. K., Mattia, D. and Gogotsi, Y., 2008. Field controlled nematic-to-isotropic phase transition in liquid crystal-carbon nanotube composites. Journal of Applied Physics, 103 (6), 064314/1-064314/5.
Sharma, R. I., Shreiber, D. I. and Moghe, P. V., 2008. Nanoscale variation of bioadhesive substrates as a tool for engineering of cell matrix assembly. Tissue Engineering Part A, 14 (7), pp. 1237-1250.
Sytniewski, L. J., Lapkin, A. A., Stepanov, S. and Wang, W. N., 2008. CFD optimisation of up-flow vertical HVPE reactor for GaN growth. Journal of Crystal Growth, 310 (14), pp. 3358-3365.
Torrente Murciano, L. and Chadwick, D., 2008. Generation of hydrogen peroxide for green selective oxidation. In: 20th International Symposium on Chemical Reaction Engineering, 2008-09-01.
Torrente Murciano, L. and Chadwick, D., 2008. Selective oxidation with hydrogen peroxide. In: Rideal Conference on Catalysis, 2008-03-01.
Vidal, L., Chisvert, A., Canals, A., Psillakis, E., Lapkin, A. A., Acosta, F., Edler, K. J., Holdaway, J. A. and Marken, F., 2008. Chemically surface-modified carbon nanoparticle carrier for phenolic pollutants: Extraction and electrochemical determination of benzophenone-3 and triclosan. Analytica Chimica Acta, 616 (1), pp. 28-35.
Watt-Smith, M. J., Friedrich, J. M., Rigby, S., Ralph, T. R. and Walsh, F. C., 2008. Determination of the electrochemically active surface area of Pt/C PEM fuel cell electrodes using different adsorbates. Journal of Physics D: Applied Physics, 41 (17), 174004.
Watt-Smith, M. J., Rigby, S., Ralph, T. R. and Walsh, F. C., 2008. Characterisation of porous carbon electrode materials used in proton exchange membrane fuel cells via gas adsorption. Journal of Power Sources, 184 (1), pp. 29-37.
Wols, B. A., Uijttewaal, W. S. J., Rietveld, L. C., Stelling, G. S., Van Dijk, J. C. and Hofman, J. A. M. H., 2008. Residence time distributions in ozone contactors. Ozone-Science & Engineering, 30 (1), pp. 49-57.
Wu, X., Chaudhuri, J.B., Ellis, M. J., Jones, M.D. and Davidson, M.G., 2008. Precision fabricated stereoisomeric and stereoregular pla/plga for tissue engineering scaffolds. In: World Biomaterials Congress, 2008-05-25 - 2008-06-01.
Wu, X., Jones, M.D., Chaudhuri, J.B., Davidson, M.G. and Ellis, M. J., 2008. Fabrication of porous PLGA scaffolds with different methods and their applications for tissue engineering. In: 8th World Biomaterials Congress 2008, 2008-05-28 - 2008-06-01.
Yarin, A. L., Megaridis, C. M., Mattia, D. and Gogotsi, Y., 2008. Smoothing of nanoscale roughness based on the Kelvin effect. Nanotechnology, 19 (36), 365702.
Zayed, F., Greiner, L., Schulz, P. S., Lapkin, A. and Leitner, W., 2008. Continuous catalytic Friedel-Crafts acylation in the biphasic medium of an ionic liquid and supercritical carbon dioxide. Chemical Communications, 1, pp. 79-81.
Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2008. Temperature responsive pore-filled membranes based on a BSA/poly(N-isopropylacrylamide) hydrogel. Advances in Polymer Technology, 27 (1), pp. 27-34.
2007
Arnot, T., 2007. Membrane bioreactors: technology, design and application. In: Technologies for Industrial Wastewater Treatment & Reuse in the Mediterranean Region, 2007-05-24 - 2007-05-26.
Asteriadou, K., Hasting, T., Bird, M. and Melrose, J., 2007. Predicting cleaning of equipment using computational fluid dynamics. Journal of Food Process Engineering, 30 (1), pp. 88-105.
Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J., Chaudhuri, J. B. and Lewis, R. W. C., 2007. The Structure and Properties of Electroceramics for Bone Graft Substitution. In: The Structure and Properties of Electroceramics for Bone Graft Substitution, UKSB, 2007-01-01.
Bird, M., Evans, P. and Wu, D., 2007. The application of UF membranes to the filtration of model tea component solutions and reconstituted black tea powder. In: International Membrane Science and Technology Conference (IMSTEC'07), 2007-11-05 - 2007-11-09.
Camus, O., Crittenden, B., Perera, S., Mays, T., Sanchez Liarte, F., Patsos, A., Tennison, S. R. and Crezee, E., 2007. Non-Uniformities in Adsorbent Monoliths. In: 9th International Conference on Fundamentals of Adsorption, 2007-05-20 - 2007-05-25.
Chew, J., Ian Wilson, D. and Paterson, W.R., 2007. Fluid dynamic gauging:A new technique for studying membrane fouling. Water Science and Technology : Water Supply, 7 (5-6).
Chew, J., Saikhwan, P., Ian Wilson, D., Paterson, W.R. and Gould, A., 2007. Swelling and Its Suppression in the Cleaning of Polymer Fouling Layers. Industrial and Engineering Chemistry Research, 46 (14), pp. 4846-4855.
Chew, J., Saikhwan, P., Wilson, D.I., Paterson, W.R. and Gould, A., 2007. Fluid dynamic gauging: a technique for studying the cleaning of food process surfaces. Food Manufacturing Efficiency
Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2007. Fluid dynamic gauging: A new tool to study deposition on porous surfaces. Journal of Membrane Science, 296 (1-2), pp. 29-41.
Chmura, A. J., Chuck, C. J., Davidson, M. G., Jones, M. D., Lunn, M. D., Bull, S. D. and Mahon, M. F., 2007. A germanium alkoxide supported by a C-3-symmetric ligand for the stereoselective synthesis of highly heterotactic polylactide under solvent-free conditions. Angewandte Chemie-International Edition, 46 (13), pp. 2280-2283.
Chuck, C. J., 2007. Lewis acid catalyst design for the transesterification of lower quality feedstock for biodiesel production. Thesis (Doctor of Philosophy (PhD)). University of Bath.
Crezee, E., Tennison, S., Camus, O., Crittenden, B., Perera, S., Sanchez Liarte, F., Black, S. and Phillips, P. L., 2007. Electrically regenerable chemical defence system based on carbon monolithic adsorbers. In: 9th Symposium on Protection against Chemical and Biological Warfare Agents, 2007-05-22 - 2007-05-25.
Di Lorenzo, M., Hidalgo, A., Molina, R., Hermoso, J. A., Pirozzi, D. and Bornscheuer, U. T., 2007. Enhancement of the Stability of a Prolipase from Rhizopus oryzae toward Aldehydes by Saturation Mutagenesis. Applied and Environmental Microbiology, 73 (22), pp. 7291-7299.
Ding, Y., Chen, H., He, Y., Lapkin, A., Yeganeh, M., Siller, L. and Butenko, Y. V., 2007. Forced convective heat transfer of nanofluids. Advanced Powder Technology, 18 (6), pp. 813-824.
Emanuelsson, E. A. C., Emanuelsson, M. A. E., Patterson, D. A., Castro, P. M. L. and Livingston, A. G., 2007. Microbiology for chemical engineers: from macro to micro scale. Asia-Pacific Journal of Chemical Engineering, 2 (5), pp. 448-454.
England, R., 2007. Developments and applications of membranes in chemical and bioprocess engineering. Journal of Applied Sciences, 7 (15), pp. 1991-1997.
Eslava, S., Baklanov, M.R., Kirschhock, C.E.A., Iacopi, F., Aldea, S., Maex, K. and Martens, J.A., 2007. Characterization of a molecular sieve coating using ellipsometric porosimetry. Langmuir, 23 (26), pp. 12811-12816.
Eslava, S., Iacopi, F., Baklanov, M.R., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2007. Ultraviolet-assisted curing of polycrystalline pure-silica zeolites:Hydrophobization, functionalization, and cross-linking of grains. Journal of the American Chemical Society, 129 (30), pp. 9288-9289.
Evans, P. and Bird, M., 2007. The fouling and cleaning of ultrafiltration membranes for black tea liquor clarification. In: European Congress of Chemical Engineering (ECCE) – 6, 2007-09-16 - 2007-09-21.
Freedman, J. R., Mattia, D., Korneva, G., Gogotsi, Y., Friedman, G. and Fontecchio, A. K., 2007. Magnetically assembled carbon nanotube tipped pipettes. Applied Physics Letters, 90 (10), 103108/1-103108/3.
Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. and Chaudhuri, J., 2007. Characterisation of ferroelectric-calcium phosphate composites and ceramics. Journal of the European Ceramic Society, 27 (13-15), pp. 4187-4190.
Greaves, M. and Bentaher, A. H., 2007. Exothermicity characteristics of wolf lake heavy oil, Athabasca tar sand and clair medium heavy oil. Journal of Canadian Petroleum Technology, 46 (9), pp. 16-19.
Herdes, C., Valente, A., Lin, Z., Rocha, J., Coutinho, J. A. P., Medina, F. and Vega, L. F., 2007. Selective adsorption of volatile organic compounds in micropore aluminum methylphosphonate-α:a combined molecular simulation-experimental approach. Langmuir, 23 (13), pp. 7299-7305.
Hubble, J., 2007. Affinity adsorption of cells to surfaces and strategies for cell detachment. Advances in Biochemical Engineering/Biotechnology, 106 (Cell Separation), pp. 75-99.
Kolaczkowski, S. T., Chao, R., Awdry, S. and Smith, A., 2007. Application of a CFD code (FLUENT) to formulate models of catalytic gas phase reactions in porous catalyst pellets. Chemical Engineering Research & Design, 85 (A11), pp. 1539-1552.
Kolaczkowski, S. T., Plucinski, P. and Lapkin, A. A., 2007. Selective oxidation of benzyl alcohol in a pilot scale multichannel reactor. In: 1st International Congress on Green Process Engineering, 2007-04-24 - 2007-04-26.
Koumpouras, G. C., Alpay, E., Lapkin, A., Ding, Y. and Stepanek, F., 2007. The effect of adsorbent characteristics on the performance of a continuous sorption-enhanced steam methane reforming process. Chemical Engineering Science, 62 (18-20), pp. 5632-5637.
Lanham, A., Braz, R. and Gama, P., 2007. Arquitectura Bioclimatica: perspectivas de inovacao e futuro. In: SEMINÁRIOS: DESENVOLVIMENTO SUSTENTÁVEL & INOVAÇÃO.1 ed. Portugal: IST Press.
Lawrence, R. M. H., Mays, T., Rigby, S., Walker, P. and D'Ayala, D., 2007. Effects of carbonation on the pore structure of non-hydraulic lime mortars. Cement and Concrete Research, 37 (7), pp. 1059-1069.
Legum, B., Cooper, R., Mattia, D., Gogotsi, Y. and Layton Bradley, E., 2007. The effect of deformation on room temperature Coulomb blockade using conductive carbon nanotubes. Engineering in Medicine and Biology Society (29th Annual International Conference of the IEEE), 2007, pp. 4206-10.
Mattia, D., Korneva, G., Sabur, A., Friedman, G. and Gogotsi, Y., 2007. Multifunctional Nanotubes with Nanoparticles Embedded in their Walls. Nanotechnology, 18, p. 155305.
Mattia, D., Rossi, M. P., Ye, H. and Gogotsi, Y., 2007. In situ Fluid Studies in Carbon Nanotubes with Diameters Ranging from 1 to 500 nm. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics – 2007, 2007-01-01.
Mattia, D., Korneva, G., Friedman, G. and Gogotsi, Y., 2007. Multifunctional Nanotubes with Particles Embedded in their Walls. Abstracts, 39th Middle Atlantic Regional Meeting of the American Chemical Society, Collegeville, PA, United States, May 16-18
Mays, T. J., 2007. A new classification of pore sizes. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 57-62.
McFetridge, P. S., Abe, K., Horrocks, M. and Chaudhuri, J. B., 2007. Vascular tissue engineering: Bioreactor design considerations for extended culture of primary human vascular smooth muscle cells. Asaio Journal, 53 Sep-Oct (5), pp. 623-630.
Morgan, S. M., Tilley, S., Perera, S., Ellis, M. J., Kanczler, J., Chaudhuri, J. B. and Oreffo, R. O. C., 2007. Expansion of human bone marrow stromal cells on poly-(lactide-co-glycolide) hollow fibers designed for use in skeletal tissue engineering. Biomaterials, 28 (35), pp. 5332-5343.
Odunsi, O. Y., He, Y. and Mays, T. J., 2007. Hydrogen storage in nanoporous carbon. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 423-430.
Pereira, M., Sharma, R. I., Penkala, R., Gentzel, T. A., Schwarzbauer, J. E. and Moghe, P. V., 2007. Engineered cell-adhesive nanoparticles nucleate extracellular matrix assembly. Tissue Engineering Parts A, B, & C, 13 (3), pp. 567-578.
Perera, S., 2007. Biocompatible Drug Delivery Device. A61K9/70- WO2007052042 (A2), 10 May 2007.
Perkins, E. L., Rigby, S. P., Edler, K. J. and Lowe, J., 2007. NMR cryoporometry and PFG studies of water diffusion in poly (lactic-co-glycolic acid) microspheres for drug delivery. Journal of Pharmacy and Pharmacology, 59, A17-A17.
Rigby, S. P., 2007. A Unified Model for the Effects of Surface Heterogeneity on Gas Absorption and Surface Diffusion on Silica Surfaces. In: Fong, P. A., ed. Colloid and Surface Research Trends. Nova Science, pp. 147-167.
Roengpithya, C., Patterson, D. A., Livingston, A. G., Taylor, P. C., Irwin, J. L. and Parrett, M. R., 2007. Towards a continuous dynamic kinetic resolution of 1-phenylethylamine using a membrane assisted, two vessel process. Chemical Communications, 33, pp. 3462-3463.
Sarbatly, R., Krishnaiah, D. and England, R., 2007. Continuous recycle enzymatic membrane reactor system for in-situ production of pure and sterile glucose solution. Journal of Applied Sciences, 7 (15), pp. 2063-2068.
Sarbatly, R., Krishnaiah, D., England, R., Abang, S. and Jeffery, J., 2007. Comparison studies of applied pressure and concentration gradient driving forces in ceramic nano-filtration membrane for the production of intravenous salt solution. Journal of Applied Sciences, 7 (15), pp. 2069-2075.
Shamiryan, D., Paraschiv, V., Eslava, S., Demand, M., Baklanov, M., Beckx, S. and Boullart, W., 2007. Profile control of novel non-Si gates using B Cl3 N2 plasma. Journal of Vacuum Science & Technology B, 25 (3), pp. 739-744.
Sinha, S., Pia Rossi, M., Mattia, D., Gogotsi, Y. and Bau, H. H., 2007. Induction and measurement of minute flow rates through nanopipes. Physics of Fluids, 19 (1), 013603/1-013603/8.
Stewart, K., Pabbruwe, M., Dickinson, S., Hollander, A. P. and Chaudhuri, J. B., 2007. The effect of growth factor treatment on meniscal chondrocyte proliferation and differentiation on polyglycolic acid scaffolds. Tissue Engineering, 13 (2), pp. 271-280.
Tare, R. S., Forsey, R. W., Chaudhuri, J. B. and Oreffo, R. O. C., 2007. Engineering cartilaginous explants using human stro-1+progenitors, alginate scaffolds and perfusion bioreactors. Tissue Engineering, 13 (7), p. 1688.
Torrente Murciano, L., Lapkin, A., Bavykin, D., Walsh, F. and Wilson, K., 2007. Highly selective Pd/titanate nanotube catalysts for the double-bond migration reaction. Journal of Catalysis, 245 (2), pp. 272-278.
Vega, L. F., Herdes, C., Valente, A., Lin, Z., Rocha, J. and Coutinho, J. A. P., 2007. A new material for the selective olefin/paraffin separation by adsorption. In: 2007 AIChE Annual Meeting, 2007-11-04 - 2007-11-09.
Watt-Smith, M. J., Rigby, S. P., Chudek, J. A. and Fletcher, R. S., 2007. Simulation of mercury porosimetry using MRI images of porous media. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 177-184.
Wu, D. and Bird, M. R., 2007. The fouling and cleaning of ultrafiltration membranes during the filtration of model tea component solutions. Journal of Food Process Engineering, 30 (3), pp. 293-323.
Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2007. A smart membrane based on an antigen-responsive hyrogel. Biotechnology and Bioengineering, 97 (4), pp. 976-984.
2006
Aguilera-Mercado, B., Herdes, C., Murgich, J. and Müller, E. A., 2006. Mesoscopic simulation of aggregation of asphaltene and resin molecules in crude oils. Energy and Fuels, 20 (1), pp. 327-338.
Ainsworth, B. J. and Chaudhuri, J. B., 2006. Development of fibrous porous silk scaffolds. European Cells and Materials, 11 (Supplement 3), p. 4.
Armini, S., Whelan, C.M., Smet, M., Eslava, S. and Maex, K., 2006. Size shrinkage of methacrylate-based terpolymer latexes synthesized by free radical polymerization:Kinetics and influence of main reaction parameters. European Polymer Journal, 38 (8), pp. 786-798.
Arnot, T., 2006. Membrane Bioreactors for Waste Water Treatment. In: VIII Spring Postgraduate Membrane School, 2006-04-23 - 2006-04-26.
Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2006. Computational fluid dynamics for the prediction of temperature profiles and hygienic design in the food industry. Food and Bioproducts Processing, 84 (C2), pp. 157-163.
Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2006. Assessing the cleaning of unhygienic geometries in the food industry using computational fluid dynamics (CFD). In: Fouling, Cleaning and Disinfection 2006, 2006-03-20 - 2006-03-22.
Bavykin, D., Lapkin, A., Plucinski, P., Torrente-Murciano, L., Friedrich, J. and Walsh, F., 2006. Deposition of Pt, Pd, Ru and Au into the pores of TiO2 nanotubes. Topics in Catalysis, 39, pp. 151-160.
Bavykin, D. V., Friedrich, J. M., Lapkin, A. A. and Walsh, F. C., 2006. Stability of Aqueous Suspensions of Titanate Nanotubes. Chemistry of Materials, 18 (5), pp. 1124-1129.
Bavykin, D. V., Lapkin, A. A., Plucinski, P. K., Torrente Murciano, L., Friedrich, J. M. and Walsh, F. C., 2006. Deposition of Pt, Pd, Ru and Au on the surfaces of titanate nanotubes. Topics in Catalysis, 39 (3-4), pp. 151-160.
Bowen, C. R., Gittings, J., Turner, I. G., Baxter, F. and Chaudhuri, J. B., 2006. Dielectric and piezoelectric properties of hydroxyapatite-BaTiO3 composites. Applied Physics Letters, 89 (13), 132906.
Bullen, R. A., Arnot, T. C., Lakeman, J. B. and Walsh, F. C., 2006. Biofuel cells and their development. Biosensors and Bioelectronics, 21 (11), pp. 2015-2045.
Camus, O., Perera, S., Crittenden, B., van Delft, Y. C., Meyer, D. F., Pex, P., Kumakiri, I., Miachon, S., Dalmon, J. A., Tennison, S. and Chanaud, P., 2006. Ceramic membranes for ammonia recovery. AIChE Journal, 52 (6), pp. 2055-2065.
Chew, J., 2006. Solvent-based cleaning of emulsion polymerization reactors. Chemical Engineering Journal, 117 (1), pp. 61-69.
Chuck, C. J., Davidson, M. G., Jones, M. D., Kociok-Kohn, G., Lunn, M. D. and Wu, S., 2006. Air-stable titanium alkoxide based metal-organic framework as an initiator for ring-opening polymerization of cyclic esters. Inorganic Chemistry, 45 (17), pp. 6595-6597.
Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G. and Bornscheuer, U. T., 2006. Stabilization of lipase from Rhizopus oryzae in the presence of commercial triglycerides. In: Third International Congress on Biocatalysis, Biocat 2006, 2006-09-03 - 2006-09-07.
Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G. and Bornscheuer, U. T., 2006. Stabilization of lipase from Rhizopus oryzae in the presence of commercial triglycerides. In: Symposium on Protein Design and Evolution for Byocatalysis, 2006-08-30 - 2006-09-01.
Di Lorenzo, M., Pirozzi, D. and Greco, G., 2006. Lipases in the oleochemical industry. In: 17th International Congress of Chemical and Process Engineering, 2006-08-27 - 2006-08-31.
Ellis, M. J. and Chaudhuri, J. B., 2006. Poly(lactic-co-glycolic acid) hollow fibre membranes for use as a tissue engineering scaffold. Biotechnology and Bioengineering, 96 (1), pp. 177-187.
Eslava, S., Baklanov, M.R., Iacopi, F., Brongersma, S.H., Kirschhock, C.E.A. and Maex, K., 2006. Zeolite low-k film properties dependence on nanocrystal size. Materials Research Society Symposium Proceedings, 914, pp. 421-426.
Evans, P. J. and Bird, M. R., 2006. Solute-membrane fouling interactions during the ultrafiltration of black tea liquor. Food and Bioproducts Processing, 84 (C4), pp. 292-301.
Evans, P. and Bird, M., 2006. Solute – membrane interactions during the ultrafiltration of black tea liquor. In: Fouling, Cleaning and Disinfection 2006, 2006-03-20 - 2006-03-22.
Gijsbertsen-Abrahamse, A. J., Cornelissen, E. R. and Hofman, J. A. M. H., 2006. Fiber failure frequency and causes of hollow fiber integrity loss. Desalination, 194 (1-3), pp. 251-258.
Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2006. Experimental study of a novel in situ gasification technique for improved oil recovery from light oil reservoirs. Journal of Canadian Petroleum Technology, 45 (8), pp. 41-47.
Greaves, M., Hwessa, M. M. and Ayasse, C., 2006. Paper 2006-407: THAI Process Development – Experiment to Pilot. In: World Heavy Oil Conference, 2006-12-05 - 2006-12-06.
Herdes, C., Santos, M. A., Medina, F. and Vega, L. F., 2006. Precise characterization of selected silica-based materials from grand canonical Monte Carlo simulations. In: 3rd International Materials Symposium and 12th Portuguese Materials Society Meeting 2005, 2005-03-20 - 2005-03-23. (Materials Science Forum; 514-516/PART 2)
Herdes, C., Lin, Z., Valente, A., Coutinho, J. A. P. and Vega, L. F., 2006. Nitrogen and water adsorption in aluminum methylphosphonate α:a molecular simulation study. Langmuir, 22 (7), pp. 3097-3104.
Kolaczkowski, S. T. and Kim, S., 2006. Novel alumina 'KK Leaf Structures' as catalyst supports. Catalysis Today, 117 (4), pp. 554-558.
Kolaczkowski, S., 2006. Treatment of volatile organic carbon (VOC) emissions from stationary sources: catalytic oxidation of the gaseous phase. Chemical Industries, 110 (Structured Catalysts), pp. 147-170.
Korneva, G., Mattia, D., Gogotsi, Y. and Bradley, J. C., 2006. Filling carbon nanopipes with functionalized nanoparticles. Abstracts of Papers, 231st ACS National Meeting, Atlanta, GA, United States, March 26-30, 2006
Korneva, G., Mattia, D., Gogotsi, Y., Halverson, D., Friedman, G., Yee, H. and Bradley, J.-C., 2006. Filling carbon nanopipes with functional nanoparticles. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 51 (1), pp. 36-37.
Lapkin, A. A., 2006. Sustainability performance indicators. In: Dewulf, J. and van Langenhove, I. H., eds. Renewables-Based Technology: Sustainability Assessment. John Wiley & Sons, pp. 39-53.
Lapkin, A., Savill-Jowitt, C., Edler, K. and Brown, R., 2006. Microcalorimetric Study of Ammonia Chemisorption on H3PW12O40 Supported onto Mesoporous Synthetic Carbons and SBA-15. Langmuir, 22 (18), pp. 7664-7671.
Lapkin, A. A., Bozkaya, B. and Plucinski, P. K., 2006. Selective oxidation of 1-butene by molecular oxygen in a porous membrane Taylor flow reactor. Industrial & Engineering Chemistry Research, 45 (7), pp. 2220-2228.
Lapkin, A. A., Plucinski, P. K. and Cutler, M., 2006. Comparative Assessment of Technologies for Extraction of Artemisinin. Journal of Natural Products, 69 (11), pp. 1653-1664.
Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. Determination of carbonation profiles in non-hydraulic lime mortars using thermogravimetric analysis. Thermochimica Acta, 444 (2), pp. 179-189.
Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. The use of TG to measure different concentrations of lime in non-hydraulic lime mortars. Journal of Thermal Analysis and Calorimetry, 85 (2), pp. 377-382.
Liu, Y., Withers, R., Ting, V. P., Fitzgerald, J. and Noren, L., 2006. Stacking fault disorder and its diffraction consequences in Ba3MNb2O9 (M=Co and Mn) 1:2 triple perovskites. Physica B: Condensed Matter, 385-386 (1), pp. 564-566.
Lukyanov, D. B. and Vazhnova, T., 2006. Active Sites in Working Bifunctional GaH-TON Aromatization Catalysts: Kinetic Evaluation. Journal of Physical Chemistry B, 110 (37), pp. 18473-18480.
Lukyanov, D. B. and Vazhnova, T., 2006. Aromatization activity of gallium containing MFI and TON zeolite catalysts in n-butane conversion: Effects of gallium and reaction conditions. Applied Catalysis A General, 316 (1), pp. 61-67.
Mattia, D., Bau, H. H. and Gogotsi, Y., 2006. Wetting of CVD Carbon Films by Polar and Nonpolar Liquids and Implications for Carbon Nanopipes. Langmuir, 22 (4), pp. 1789-1794.
Mattia, D., Rossi, M. P., Kim, B. M., Korneva, G., Bau, H. H. and Gogotsi, Y., 2006. Effect of Graphitization on the Wettability and Electrical Conductivity of CVD-Carbon Nanotubes and Films. Journal of Physical Chemistry B, 110 (20), pp. 9850-9855.
Mattia, D. and Gogotsi, Y., 2006. Surface functionalization to control the wetting behavior of nanostructured carbons. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 51 (1), pp. 3-4.
Nguyen, L. H., Vazhnova, T., Kolaczkowski, S. T. and Lukyanov, D. B., 2006. Combined experimental and kinetic modelling studies of the pathways of propane and n-butane aromatization over H-ZSM-5 catalyst. Chemical Engineering Science, 61 (17), pp. 5881-5894.
Norén, L., Withers, R. L., Schmid, S., Brink, F. J. and Ting, V., 2006. Old friends in a new light: “SnSb” revisited. Journal of Solid State Chemistry, 179 (2), pp. 404-412.
Pound, J. C., Green, D. W., Chaudhuri, J. B., Roach, H. I. and Oreffo, R. O. C., 2006. Promotion of chondrogenesis and osteogenesis from mixed human mesenchymal progenitors within innovative polysaccharide capsules. Tissue Engineering, 12 (4), pp. 1030-1031.
Pound, J. C., Green, D. W., Chaudhuri, J. B., Mann, S., Roach, H. I. and Oreffo, R. O. C., 2006. Strategies to Promote Chondrogenesis and Osteogenesis from Human Bone Marrow Cells and Articular Chondrocytes Encapsulated in Polysaccharide Templates. Tissue Engineering, 12 (10), pp. 2789-2799.
Rigby, S. P., Watt-Smith, M. J., Chigada, P., Chudek, J. A., Fletcher, R. S., Wood, J., Bakalis, S. and Miri, T., 2006. Studies of the entrapment of non-wetting fluid within nanoporous media using a synergistic combination of MRI and micro-computed X-ray tomography. Chemical Engineering Science, 61 (23), pp. 7579-7592.
Rigby, S. P., Evbuomwan, I. O., Watt-Smith, M. J., Edler, K. and Fletcher, R. S., 2006. Using nano-cast model porous media and integrated gas sorption to improve fundamental understanding and data interpretation in mercury porosimetry. Particle & Particle Systems Characterization, 23 (1), pp. 82-93.
Roengpithya, C., Patterson, D. A., Gibbins, E. J., Taylor, P. C. and Livingston, A. G., 2006. Investigation of the Compatibility of Racemization and Kinetic Resolution for the Dynamic Kinetic Resolution of an Allylic Alcohol. Industrial & Engineering Chemistry Research, 45 (21), pp. 7101-7109.
Roengpithya, C., Patterson, D. A., Taylor, P. C. and Livingston, A. G., 2006. Development of stable organic solvent nanofiltration membranes for membrane enhanced dynamic kinetic resolution. Desalination, 199 (1-3), pp. 195-197.
Rosalam, S. and England, R., 2006. Review of xanthan gum production from unmodified starches by Xanthomonas campestris sp. Enzyme Microbial Technology, 39 (2), pp. 197-207.
Shah, H. J., Fontecchio, A. K., Rossi, M. P., Mattia, D. and Gogotsi, Y., 2006. Imaging of liquid crystals confined in carbon nanopipes. Applied Physics Letters, 89 (4), 043123/1-043123/3.
Sharma, R. I., Pereira, M., Schwarzbauer, J. E. and Moghe, P. V., 2006. Albumin-derived nanocarriers:Substrates for enhanced cell adhesive ligand display and cell motility. Biomaterials, 27 (19), pp. 3589-3598.
Shearer, H., Ellis, M. J., Perera, S. P. and Chaudhuri, J. B., 2006. Effects of common sterilization methods on the structure and properties of poly(D,L lactic-co-glycolic acid) scaffolds. Tissue Engineering, 12 (10), pp. 2717-2727.
Somphon, W., Ting, V., Liu, Y., Withers, R. L., Zhou, Q. and Kennedy, B. J., 2006. Local crystal chemistry, structured diffuse scattering and the dielectric properties of (Bi1−xYx)2(MIIINbV)O7 (M=Fe3+, In3+) Bi-pyrochlores. Journal of Solid State Chemistry, 179 (8), pp. 2495-2505.
Ting, V., Liu, Y. and Withers, R., 2006. A temperature-dependent structural investigation of electrical transitions in A3conb2o9 perovskites (A=Ca2+, Sr2+, Ba2+). Physica B Condensed Matter, 385-386 (1), pp. 558-560.
Ting, V., Liu, Y., Withers, R. L., Norén, L., James, M. and Fitz Gerald, J. D., 2006. A structure and phase analysis investigation of the “1:1” ordered A2InNbO6 perovskites (A=Ca2+, Sr2+, Ba2+). Journal of Solid State Chemistry, 179 (2), pp. 551-562.
Walsh, F. C., Bavykin, D. V., Torrente Murciano, L., Lapkin, A. A. and Cressey, B. A., 2006. Synthesis of novel composite materials via the deposition of precious metals onto protonated titanate (TiO2) nanotubes. Transactions of the Institute of Metal Finishing, 84 (6), pp. 293-299.
Wang, L., Zhang, R., Eisenthal, R. and Hubble, J., 2006. An intrinsically shielded hydrogel for the adsorptive recovery of lysozyme. Biotechnology and Applied Biochemistry, 45 (1), pp. 37-42.
Watt-Smith, M. J., Kolaczkowski, S. T., Rigby, S. P. and Chudek, J. A., 2006. Prediction of gas sorption kinetics for porous media using MRI. AIChE Journal, 52 (9), pp. 3278-3289.
Watt-Smith, M. J., Rigby, S. P., Chudek, J. A. and Fletcher, R. S., 2006. Simulation of Nonwetting Phase Entrapment within Porous Media Using Magnetic Resonance Imaging. Langmuir, 22 (11), pp. 5180-5188.
Xia, T. X. and Greaves, M., 2006. In situ upgrading of Athabasca Tar Sand bitumen using THAI. Chemical Engineering Research & Design, 84 (9), pp. 856-864.
Zhang, R., Tang, M., Bowyer, A., Eisenthal, R. and Hubble, J., 2006. Synthesis and characterization of a D-glucose sensitive hydrogel based on CM-dextran and concanavalin A. Reactive & Functional Polymers, 66 (7), pp. 757-767.
2005
Al-Redhwan, S. A., Crittenden, B. D. and Lababidi, H. M. S., 2005. Wastewater minimization under uncertain operational conditions. Computers and Chemical Engineering, 29 (5), pp. 1009-1021.
Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2005. Cleanability prediction for complex geometries in the food industry using CFD. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Bavykin, D. V., Kolaczkowski, S. T., Lapkin, A. A. and Plucinski, P. K., 2005. Compact multichannel reactor for liquid phase oxidation of organic feedstocks. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Bavykin, D. V., Milsom, E. V., Marken, F., Kim, D. H., Marsh, D. H., Riley, D. J., Walsh, F. C., El-Abiary, K. H. and Lapkin, A. A., 2005. A novel cation-binding TiO2 nanotube substrate for electro- and bioelectrocatalysis. Electrochemistry Communications, 7 (10), pp. 1050-1058.
Bavykin, D., Lapkin, A., Kolaczkowski, S. and Plucinski, P., 2005. Selective oxidation of alcohols in a continuous multifunctional reactor: ruthenium oxide catalysed oxidation of benzyl alcohol. Applied Catalysis, 288, pp. 175-184.
Bavykin, D., Lapkin, A., Plucinski, P., Friedrich, J. and Walsh, F., 2005. Intercalation of Molecular Hydrogen into the Walls of Multilayered TiO2 nanotubes. Journal of Physical Chemistry B, 109, pp. 19422-19427.
Bavykin, D., Lapkin, A., Plucinski, P., Friedrich, J. and Walsh, F., 2005. TiO2 nanotube supported ruthenium (III) hydrated oxide: A highly active catalyst for selective oxidation of alcohols with oxygen. Journal of Catalysis, 235, pp. 10-17.
Bavykin, D. V., Lapkin, A. A., Friedrich, J. M. and Walsh, F. C., 2005. Acid transformation of TiO2 nanotubes to nanoparticles. NSTI Nanotech 2005, NSTI Nanotechnology Conference & Trade Show, 2, pp. 655-658.
Bavykin, D. V., Lapkin, A. A., Plucinski, P. K., Friedrich, J. M. and Walsh, F. C., 2005. Reversible Storage of Molecular Hydrogen by Sorption into Multilayered TiO2 Nanotubes. Journal of Physical Chemistry B, 109 (41), pp. 19422-19427.
Bavykin, D. V., Gordeev, S. N., Moskalenko, A. V., Lapkin, A. A. and Walsh, F. C., 2005. Apparent two-dimensional behavior of TiO2 nanotubes revealed by light absorption and luminescence. Journal of Physical Chemistry B, 109 (18), pp. 8565-8569.
Burrows, A., Cassar, K., Friend, R. M. W., Mahon, M. F., Rigby, S. P. and Warren, J. E., 2005. Solvent hydrolysis and templating effects in the synthesis of metal-organic frameworks. CrystEngComm, 7 (89), pp. 548-550.
Camus, O., Perera, S., Crittenden, B., Leal, M., Tennison, S., Kumakiri, I., Miachon, S., Dalmon, J.-A. and Chanaud, P., 2005. Microporous ceramic membranes in industrial ammonia separation. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Chaudhuri, J., Fryer, P. and Editors, [N. V.], 2005. Special Issue: The 7th World Congress of Chemical Engineering: Engineering for Life Incorporating the 5th European Congress held 10-14 July 2005 in Glasgow, England.Vol. 83(C2). Unkown Publisher. (Food Bioprod. Process)
Chew, J. Y. M., Paterson, W. A., Wilson, D. I., Houfling, V. and Augustin, W., 2005. A method for measuring the strength of scale deposits on heat transfer surfaces. Asia-Pacific Journal of Chemical Engineering, 13 (1-2), pp. 21-30.
Chew, J., 2005. Mechanisms in the Solvent Cleaning of Emulsion Polymerization Reactor Surfaces. Industrial and Engineering Chemistry Research, 44 (13), pp. 4605-4616.
Cornelissen, E. R., Verdouw, J., Gijsbertsen-Abrahamse, A. J. and Hofman, J. A. M. H., 2005. A nanofiltration retention model for trace contaminants in drinking water sources. Desalination, 178 (1-3 SPEC. ISS.), pp. 179-192.
Crezee, E., Tennison, B. D. and Crittenden, B. D., 2005. VOCs and NOx: better control and lower costs. Chemical Engineering Education
Crezee, E., Tennison, S. R., Rawlinson, A. P., Place, R. N., Crittenden, B. D. and Perera, S. P., 2005. Electrically regenerable carbon monolithic adsorption system for the recovery and recycle of volatile organic chemicals (VOCs). In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Crittenden, B. D. and England, R., 2005. Environmental impact assessment, teaching the principles and practices by means of a role-playing case study. Chemical Engineering Education, 39 (1), pp. 76-80.
Crittenden, B. D., Lau, A., Brinkmann, T. and Field, R. W., 2005. Oscillatory flow and axial dispersion in packed beds of spheres. Chemical Engineering Science, 60 (1), pp. 111-122.
Crittenden, B., Perera, S., Mays, T., Camus, O. and Tennison, S., 2005. Monolithic adsorbents in sustainable development. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Crittenden, B. D., Patton, A., Jouin, C., Perera, S., Tennison, S. and Echevarria, J. A. B., 2005. Carbon monoliths: a comparison with granular materials. Adsorption, 11 (1), pp. 537-541.
Di Lorenzo, M., Hidalgo, A., Haas, M. and Bornscheuer, U. T., 2005. Heterologous Production of Functional Forms of Rhizopus oryzae Lipase in Escherichia coli. Applied and Environmental Microbiology, 71 (12), pp. 8974-8977.
Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G., Haas, M. J. and Bornscheuer, U. T., 2005. Active expression of lipase forms from Rhizopus delemar in E. coli. In: BioPerspectives 2005, 2005-05-10 - 2005-05-12.
Di Lorenzo, M., Pirozzi, D., Greco, G. and Hidalgo, A., 2005. Stabilization of a lipase from Rhizopus delemar in the presence of commercial triglycerides. In: BioPerspectives 2005, 2005-05-10 - 2005-05-12.
Edler, K. J., Arrowsmith, M., Hamilton, M. and Rigby, S. P., 2005. Modeling the fractal growth of templated, mesoporous silica films. Journal of Physical Chemistry B, 109 (13), pp. 6294-6303.
Ellis, M. J., Tai, C. C., Perera, S. and Chaudhuri, J. B., 2005. Biodegradable hollow fibre membranes for clinical scale bone tissue constructs. International Journal of Experimental Pathology, 86 (3), A16-A17.
Gibbons, E., Irwin, J., Livingston, A. G., Muir, J. C., Patterson, D., Roengpithya, C. and Taylor, P. C., 2005. Dynamic kinetic resolution of racemates using membrane-separated catalysts. Abstracts of Papers of the American Chemical Society, 229, U550.
Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Downhole gasification for improved oil recovery. Prog. Oilfield Chem., 6 (Managing Matured Fie), pp. 1-12.
Greaves, M., Bentaher, A. H. and Rathbone, R. R., 2005. Paper D16: Air Injection into Light Oil Reservoirs: Oxidation Kinetics and Simulation. In: 13th European Symposium on Improved Oil Recovery, 2005-04-25 - 2005-04-27.
Greaves, M. and Xia, T. X., 2005. SPE-97728: Underground Upgrading of Heavy Oil Using THAI – ‘Toe-to-Heel Air Injection’. In: SPE International Thermal Operations and Heavy Oil Symposium, 2005-11-01 - 2005-11-03.
Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Paper 038-2005: Underground Gasification for Improved Oil Recovery. In: 6th Canadian International Petroleum Conference, 2005-06-07 - 2005-06-09.
Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Paper IOR-C32: Downhole Gasification for Improved Oil Recovery. In: 13th European Symposium on Improved Oil Recovery, 2005-04-25 - 2005-04-27.
Herdes, C., Santos, M. A., Abelló, S., Medina, F. and Vega, L. F., 2005. Search for a reliable methodology for PSD determination based on a combined molecular simulation-regularization-experimental approach:The case of PHTS materials. Applied Surface Science, 252 (3), pp. 538-547.
Herdes, C., Santos, M. A., Medina, F. and Vega, L. F., 2005. Pore size distribution analysis of selected hexagonal mesoporous silicas by grand canonical Monte Carlo simulations. Langmuir, 21 (19), pp. 8733-8742.
Hubble, J., Chaudhuri, J., Eisenthal, R., Zhang, R., Bowyer, A., Jarman-Smith, M. L. and Tang, M., 2005. Process. A61K8/04- WO2005116084 (A1), 08 December 2005.
Lindsey, B. and Mays, T., 2005. Thermogravimetric analysis of the Co-carbonisation of biomass-lignite blends. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Liu, Y., Withers, R. L., Whichello, A. P., Norén, L., Ting, V., Brink, F. and Fitz Gerald, J. D., 2005. A combined diffraction and dielectric properties investigation of Ba3MnNb2O9 complex perovskites. Journal of Solid State Chemistry, 178 (11), pp. 3389-3395.
Lukyanov, D. B., Nguyen, L. H., Vazhnova, T. and Kolaczkowski, S. T., 2005. Combined experimental and kinetic modelling studies of catalyst deactivation: propene and propane aromatisation over H-ZSM-5 catalyst. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Mattia, D., Desmaison-Brut, M., Dimovski, S., Gogotsi, Y. and Desmaison, J., 2005. Oxidation behaviour of an aluminium nitride-hafnium diboride ceramic composite. Journal of the European Ceramic Society, 25 (10), pp. 1789-1796.
Mattia, D., Desmaison-Brut, M., Tetard, D. and Desmaison, J., 2005. Wetting of HIP AlN-TiB2 ceramic composites by liquid metals and alloys. Journal of the European Ceramic Society, 25 (10), pp. 1797-1803.
McLoughlin, M., Mays, T. J. and Price, R., 2005. Growth spiral activity and step velocities on a crystal surface. Physical Review Letters, 95 (11), 115504/1-115504/4.
Messaritaki, A., Black, S. J., van der Walle, C. F. and Rigby, S. P., 2005. NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres. Journal of Controlled Release, 108 (2-3), pp. 271-281.
Noomrio, M. H., Zhang, R., Eisenthal, R. and Hubble, J., 2005. Characterisation of Hydrogel Gel Swelling by Molecular Exclusion. Biotechnology Letters, 27 (20), pp. 1587-1590.
Odunsi, O. Y., He, Y. and Mays, T. J., 2005. Hydrogen storage on nanoporous carbons. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Pabbruwe, M. B., Du, X., Stewart, K. and Chaudhuri, J. B., 2005. A comparison of microcarriers for the ex vivo expansion of ovine meniscal chondrocytes in the presence or absence of ascorbate-2-phosphate. International Journal of Experimental Pathology, 86 (3), A52-A53.
Pabbruwe, M. B., Stewart, K. and Chaudhuri, J. B., 2005. A Comparison of Colorimetric and DNA Quantification Assays for the Assessment of Meniscal Fibrochondrocyte Proliferation in Microcarrier Culture. Biotechnology Letters, 27 (19), pp. 1451-1455.
Plucinski, P. and Darragh, B., 2005. Preparation of alumina hollow fibers and their use as phase contactors for the removal of dissolved gases. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Plucinski, P., Bavykin, D., Kolaczkowski, S. and Lapkin, A., 2005. Liquid phase oxidation of organic feedstock in a compact multichannel reactor. Industrial & Engineering Chemistry Research, 44, pp. 9683-9690.
Plucinski, P. K., Bavykin, D. V., Kolaczkowski, S. T. and Lapkin, A. A., 2005. Application of a structured multifunctional reactor for the oxidation of a liquid organic feedstock. Catalysis Today, 105 (3-4), pp. 479-483.
Rigby, S. P., Watt-Smith, M. J. and Fletcher, R. S., 2005. Integrating gas sorption with mercury porosimetry. Adsorption, 11, pp. 201-206.
Rigby, S. P., 2005. Predicting surface diffusivities of molecules from equilibrium adsorption isotherms. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 262 (1-3), pp. 139-149.
Santori, F. and Hubble, J., 2005. Low affinity pair size exclusion chromatography. Separation Science and Technology, 40 (8), pp. 1733-1748.
Sima-Ella, E. and Mays, T. J., 2005. Analysis of the oxidation reactivity of carbonaceous materials using thermogravimetric analysis. Journal of Thermal Analysis and Calorimetry, 80 (1), pp. 109-113.
Sima-Ella, E. and Mays, T., 2005. Oxidation reactivity of coal chars: a simple kinetic analysis. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Sima-Ella, E., Yuan, G. and Mays, T., 2005. A simple kinetic analysis to determine the intrinsic reactivity of coal chars. Fuel, 84 (14-15), pp. 1920-1925.
Sánchez-Montero, M. J., Herdes, C., Salvador, F. and Vega, L. F., 2005. New insights into the adsorption isotherm interpretation by a coupled molecular simulation - experimental procedure. Applied Surface Science, 252 (3), pp. 519-528.
Tai, C. C., Perera, S. P. and Crittenden, B. D., 2005. Development of adsorbent hollow fibres for environmental applications. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14.
Taylor, P. C., Livingston, A. G., Gibbins, E. J., Irwin, J. L., Muir, J. C., Patterson, D. A. and Roengpithya, C., 2005. An Improved Protocol for the Synthesis and Nanofiltration of Kim and Park’s Aminocyclopentadienyl Ruthenium Chloride Racemisation Catalyst. Synlett, 2005 (19), pp. 2993-2995.
Vaga, L. F., Pàmies, J. C., Llovell, F., Herdes, C., Duque, D. and Marcos, R. M., 2005. A molecular-based equation of state for process engineering. Computer Aided Chemical Engineering, 20, pp. 505-510.
Watt-Smith, M. J., Edler, K. J. and Rigby, S. P., 2005. An experimental study of gas adsorption on fractal surfaces. Langmuir, 21 (6), pp. 2281-2292.
Weis, A., Bird, M. R., Nystrom, M. and Wright, C., 2005. The influence of morphology, hydrophobicity and charge upon the long-term performance of ultrafiltration membranes fouled with spent sulphite liquor. Desalination, 175 (1), pp. 73-85.
Xia, T. X., Greaves, M. and Turta, A. T., 2005. Main mechanism for stability of THAI- toe to heel air injection. Journal of Canadian Petroleum Technology, 44 (1), pp. 42-48.
Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2005. Demonstration of an intelligent hydrogel based diffraction grating. Proceedings of SPIE - The International Society for Optical Engineering, 5758 (Smart Sensor Technol), pp. 254-264.
Zhang, R. S., Tang, M. G., Bowyer, A., Eisenthal, R. and Hubble, J., 2005. A novel pH- and ionic-strength-sensitive carboxy methyl dextran hydrogel. Biomaterials, 26 (22), pp. 4677-4683.
Zhou, Q., Kennedy, B. J., Ting, V. and Withers, R. L., 2005. Thermal expansion and cation disorder in Bi2InNbO7. Journal of Solid State Chemistry, 178 (5), pp. 1575-1579.
2004
Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2004. The use of Computational Fluid Dynamics for predicting the microbiological safety of foods. In: ICEF9, 2004-03-08 - 2004-03-11.
Barkley, S., Johnson, H., Eisenthal, R. and Hubble, J., 2004. Bubble-induced detachment of affinity-adsorbed erythrocytes. Biotechnology and Applied Biochemistry, 40 (2), pp. 145-149.
Bavykin, D. V., Parmon, V. N., Lapkin, A. A. and Walsh, F. C., 2004. The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes. Journal of Materials Chemistry, 14 (22), pp. 3370-3377.
Chaudhuri, J. B., Davey, J. and Price, G. J., 2004. A grafting approach to preparing new biocompatible polymer materials with potential as tissue engineering scaffolds. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry), 45 (1), pp. 814-815.
Chew, J., 2004. CFD Studies of Dynamic Gauging. Chemical Engineering Science, 59 (16), pp. 3381-3398.
Chew, J., Wilson, D.I. and Paterson, W. R., 2004. Fluid dynamic gauging for measuring the strength of soft deposits. Journal of Food Engineering, 65 (2), pp. 175-187.
Cui, Z. F. and Chaudhuri, J. B., 2004. Tissue engineering. Food and Bioproducts Processing, 82 (C2), p. 103.
Ghazali, N. F., Patterson, D. A. and Livingston, A. G., 2004. Elucidation of the mechanism of chiral selectivity in diastereomeric salt formation using organic solvent nanofiltration. Chemical Communications, 2004 (8), pp. 962-963.
Greaves, M. and Xia, T. X., 2004. Downhole catalytic process for upgrading heavy oil: Produced oil properties and composition. Journal of Canadian Petroleum Technology, 43 (9), pp. 25-30.
Greaves, M., Xia, T. X., Imbuss, S. and Nero, V., 2004. Paper 2004-067: THAI-CAPRI Process: Tracing Downhole Upgrading of Heavy Oil. In: 5th Canadian International Petroleum Conference, 2004-06-08 - 2004-06-10.
Greaves, M. and Xia, T. X., 2004. Downhole upgrading of Wolf Lake oil using THAI/CAPRI processes - tracer tests. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 49 (1), pp. 69-72.
Herdes, C., Pàmies, J. C., Marcos, R. M. and Vega, L. F., 2004. Thermodynamic properties and aggregate formation of surfactant-like molecules from theory and simulation. Journal of Chemical Physics, 120 (20), pp. 9822-9830.
Hofman, J. A. M. H., Ijpelaar, G. F., Heijman, S. G. J., Vrouwenvelder, J. S., Kruithof, J. C. and Van Der Meer, W. G. J., 2004. Drinking water treatment in The Netherlands:Outstanding and still ambitious. Water Science and Technology : Water Supply, 4 (5-6), pp. 253-262.
Howell, J. A., 2004. Future of membranes and membrane reactors in green technologies and for water reuse. Desalination, 162 (1-3), pp. 1-11.
Howell, J. A., Chua, H. C. and Arnot, T. C., 2004. In situ manipulation of critical flux in a submerged membrane bioreactor using variable aeration rates, and effects of membrane history. Journal of Membrane Science, 242 (1-2), pp. 13-19.
Jarman-Smith, M., Bodamyali, T., Stevens, C., Howell, J. A., Horrocks, M. and Chaudhuri, J. B., 2004. Human fibroblast culture on a crosslinked dermal porcine collagen matrix. Biochemical Engineering Journal, 20 (2-3), pp. 217-222.
Jarman-Smith, M. L., Bodamyali, T., Stevens, C., Howell, J. A., Horrocks, M. and Chaudhuri, J. B., 2004. Porcine collagen crosslinking, degradation and its capability for fibroblast adhesion and proliferation. Journal of Materials Science: Materials in Medicine, 15 (8), pp. 925-932.
Kagansky, A., Freeman, L., Lukyanov, D. and Strunnikov, A., 2004. Histone Tail-independent Chromatin Binding Activity of Recombinant Cohesin Holocomplex. Journal of Biological Chemistry, 279 (5), pp. 3382-3388.
Lapkin, A., Joyce, L. and Crittenden, B. D., 2004. A framework for evaluating the “greenness” of chemical processes, a case study of a novel VOC recovery technology,. Environmental Science and Technology, 38, pp. 5815-5823.
Lau, A., Crittenden, B. D. and Field, R. W., 2004. Enhancement of liquid phase column performance by means of oscillatory flow: an experimental study. Separation and Purification Technology, 35, pp. 113-124.
McConell, K., Jarman-Smith, M., Stewart, K. and Chaudhuri, J. B., 2004. Culture and meniscal chondrocytes on alginate hydrogel matrices. Food and Bioproducts Processing, 82 (C2), pp. 126-132.
McFetridge, P. S., Daniel, J. W., Bodamyali, T., Horrocks, M. and Chaudhuri, J. B., 2004. Preparation of porcine carotid arteries for vascular tissue engineering applications. Journal of Biomedical Materials Research, Part A, 70A (2), pp. 224-234.
McFetridge Peter, S., Bodamyali, T., Horrocks, M. and Chaudhuri, J. B., 2004. Endothelial and smooth muscle cell seeding onto processed ex vivo arterial scaffolds using 3D vascular bioreactors. Asaio Journal, 50 (6), pp. 591-600.
Patton, A., Crittenden, B. D. and Perera, S. P., 2004. The linear driving force approximation for monolithic adsorbents. Transactions of the Institute of Chemical Engineers: Part A, 82, pp. 999-1009.
Patton, A., Crittenden, B. D. and Perera, S. P., 2004. Use of the linear driving force approximation to guide the design of monolithic adsorbents. Chemical Engineering Research & Design, 82 (A8), pp. 999-1009.
Rigby, S. P. and Fletcher, R. S., 2004. Interfacing mercury porosimetry with nitrogen sorption. Particle & Particle Systems Characterization, 21, pp. 138-148.
Rigby, S. P., Beanlands, K., Evbuomwan, I. O., Watt-Smith, M. J., Edler, K. J. and Fletcher, R. S., 2004. Nanocasting of novel, designer-structured catalyst supports. Chemical Engineering Science, 59 (22-23), pp. 5113-5120.
Rigby, S. P. and Fletcher, R. S., 2004. Experimental Evidence for Pore Blocking as the Mechanism for Nitrogen Sorption Hysteresis in a Mesoporous Material. Journal of Physical Chemistry B, 108 (15), pp. 4690-4695.
Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2004. Characterization of porous solids using integrated