Research

Items from Faculty of Engineering & Design > Chemical Engineering

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items at this level: 981.

A

Aarvold, A., Smith, J. O., Tayton, E. R., Lanham, S. A., Chaudhuri, J. B., Turner, I. G. and Oreffo, R. O.C., 2013. The effect of porosity of a biphasic ceramic scaffold on human skeletal stem cell growth and differentiation in vivo. Journal of Biomedical Materials Research - Part A, 101 (12), pp. 3431-3437.

Abdul-Wahab, S., Bouhamra, W., Ettouney, H., Sowerby, B. and Crittenden, B. D., 2000. Analysis of air pollution at Shuaiba Industrial Area in Kuwait. Toxicological and Environmental Chemistry, 78 (3-4), pp. 213-232.

Abdul-Wahab, S. A., Azzi, M., Johnson, G. M., Bouhamra, W. S., Ettouney, H. M., Sowerby, B. and Crittenden, B. D., 2002. Use of an integrated empirical rate model in analysis of ozone photochemistry in industrial areas - A case study. Process Safety and Environmental Protection, 80 (4), pp. 211-219.

Abdul-Wahab, S. A., Azzi, M., Johnson, G. M., Bouhamra, W. S., Ettouney, H. M., Sowerby, B. and Crittenden, B. D., 2003. Using the integrated empirical rate-reactive plume model in assessment of the potential effects of Shuaiba Industrial Area NOx plumes on photochemical smog concentrations. Process Safety and Environmental Protection, 81 (B5), pp. 363-374.

Acott, S. M., Parsons, T. M., Nevell, J. M. and Perera, S. P., 2011. PVDF/CB composites prepared by novel solvent casting method for low voltage PTC temperature regulation applications. Journal of Applied Polymer Science, 120 (6), pp. 3673-3678.

Adamaki, V., Clemens, F., Taylor, J., Mays, T.J. and Bowen, C.R., 2014. Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis. Journal of Materials Science, 49 (21), pp. 7597-7603. Item availability may be restricted.

Ahmet, I., Sharpe, J., Ting, V., Bimbo, N., Burrows, A., Godula-Jopek, A. and Mays, T., 2012. Metal-organic framework materials for hydrogen storage in aerospace applications. In: CPM-6, 2012-04-30 - 2012-05-02, Delray Beach, Florida.

Ainsworth, B. J. and Chaudhuri, J. B., 2006. Development of fibrous porous silk scaffolds. European Cells and Materials, 11 (Supplement 3), p. 4.

Al Badran, F., 2011. Reactor design: compact and catalytic for speciality chemicals. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Al-Redhwan, S. A., Crittenden, B. D. and Lababidi, H. M. S., 2005. Wastewater minimization under uncertain operational conditions. Computers and Chemical Engineering, 29 (5), pp. 1009-1021.

Ali, A., Chapman, G.J., Chew, Y.M.J., Gu, T., Paterson, W.R. and Wilson, D.I., 2013. A fluid dynamic gauging device for measuring fouling deposit thickness in opaque liquids at elevated temperature and pressure. Experimental Thermal and Fluid Science, 48, pp. 19-28. Item availability may be restricted.

Ali, A., Chew, J., Paterson, W.R. and Wilson, D.I., 2013. Higher temperature and pressure fluid dynamic gauging.

Allen, C. L., Lapkin, A. A. and Williams, J. M. J., 2009. An iron-catalysed synthesis of amides from nitriles and amines. Tetrahedron Letters, 50 (29), pp. 4262-4264.

Alvarez, P. M., Jaramillo, J., Lopez-Pinero, F. and Plucinski, P. K., 2010. Preparation and characterization of magnetic TiO2 nanoparticles and their utilization for the degradation of emerging pollutants in water. Applied Catalysis B: Environmental, 100 (1-2), pp. 338-345.

Alvarez, P. M., McLurgh, D. and Plucinski, P., 2002. Copper Oxide Mounted on Activated Carbon as Catalyst for Wet Air Oxidation of Aqueous Phenol. 1. Kinetic and Mechanistic Approaches. Industrial & Engineering Chemistry Research, 41 (9), pp. 2147-2152.

Alvarez, P. M., McLurgh, D. and Plucinski, P., 2002. Copper Oxide Mounted on Activated Carbon as Catalyst for Wet Air Oxidation of Aqueous Phenol. 2. Catalyst Stability. Industrial & Engineering Chemistry Research, 41 (9), pp. 2153-2158.

Alves, D., Gaudion, A., Bean, J., Pérez Esteban, P., Arnot, T. C., Harper, D. R., Kot, W., Hansen, L. H., Enright, M. C. and Jenkins, A. T. A., 2014. Combined use of bacteriophage K and a novel bacteriophage to reduce Staphylococcus aureus biofilm. Applied and Environmental Microbiology, 80 (21), pp. 6694-6703.

An, J. D., Patterson, D. A., McNeil, S. and Hossain, M. M., 2014. Immobilization of lipase on woolen fabrics : enhanced effectiveness in stain removal. Biotechnology Progress, 30 (4), pp. 806-817.

Argyle, I. S., Pihlajamaki, A. and Bird, M. R., 2015. Ultrafiltration of black tea using diafiltration to recovery valuable components. Desalination and Water Treatment, 53 (6), pp. 1532-1546.

Arnot, T. C., Scott, J. A., Howell, J. A. and Liu, W., 2001. Extraction-membrane bio-reactor for treating priority pollutants in the presence of inorganics. Membrane Technology, 2001 (133), pp. 4-7.

Arnot, T., 2007. Membrane bioreactors: technology, design and application. In: Technologies for Industrial Wastewater Treatment & Reuse in the Mediterranean Region, 2007-05-24 - 2007-05-26, Djerba.

Arnot, T., 2008. Aerobic Membrane Bioreactor Technology. In: ProMembrane International Conference, 2008-05-04 - 2008-05-06, Sfax.

Arnot, T., 2008. Design and Optimisation of Aerobic Membrane Bioreactors. In: ProMembrane International Conference, 2008-05-04 - 2008-05-06, Sfax.

Arnot, T., 2008. Manipulation of Microbial Physiology in Membrane Bioreactors. In: International Symposium on Biotechnology, 2008-05-04 - 2008-05-08, Sfax.

Arnot, T., 2006. Membrane Bioreactors for Waste Water Treatment. In: VIII Spring Postgraduate Membrane School, 2006-04-23 - 2006-04-26, Opole.

Arnot, T., 2001. Operating Membrane Bioreactors under Varying Flux Conditions. In: NAMS 2001, 2001-05-15 - 2001-05-20, Kentucky.

Arnot, T., Field, R. W. and Kolutniewicz, A. B., 2000. Cross–flow and dead–end microfiltration of oily–water emulsion. Part II: Mechanisms and modelling of flux decline. Journal of Membrane Science, 169 (1), pp. 1-15.

Arnot, T. and Zahir, N., 1996. Membrane bioreactors as an alternative to conventional waste water treatment processes. Resource and Environmental Biotechnology, 1 (2), pp. 145-162.

Arrowsmith, R. L., Pascu, S. I. and Smugowski, H. J., 2012. New developments in the biomedical chemistry of metal complexes : from small molecules to nanotheranostic design. In: Organometallic Chemistry. Cambridge: RSC. (Organometallic Chemistry; 38)

Arsenyeva, O. P., Crittenden, B., Yang, M. and Kapustenko, P. O., 2013. Accounting for the thermal resistance of cooling water fouling in plate heat exchangers. Applied Thermal Engineering, 61 (1), pp. 53-59.

Asli, U. A., 2011. Catalytic Monoliths for Biodiesel Production. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2006. Computational fluid dynamics for the prediction of temperature profiles and hygienic design in the food industry. Food and Bioproducts Processing, 84 (C2), pp. 157-163.

Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2009. Exploring CFD Solutions for Coexisting Flow Regimes in a T-Piece. Chemical Engineering & Technology, 32 (6), pp. 948-955.

Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2010. Modeling heat exchanger performance for non-Newtonian fluids. Journal of Food Process Engineering, 33 (6), pp. 1010-1035.

Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2006. Assessing the cleaning of unhygienic geometries in the food industry using computational fluid dynamics (CFD). In: Fouling, Cleaning and Disinfection 2006, 2006-03-20 - 2006-03-22, Jesus College, Cambridge.

Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2005. Cleanability prediction for complex geometries in the food industry using CFD. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2004. The use of Computational Fluid Dynamics for predicting the microbiological safety of foods. In: ICEF9, 2004-03-08 - 2004-03-11, France.

Asteriadou, K., Hasting, T., Bird, M. and Melrose, J., 2007. Predicting cleaning of equipment using computational fluid dynamics. Journal of Food Process Engineering, 30 (1), pp. 88-105.

Augustin, W., Chew, Y. M. J., Gordon, P. W., Lister, V. Y., Mayer, M., Paterson, B. R., Peralta, J. M., Scholl, S. and Wilson, D. I., 2012. Dynamic Gauging of Soft Fouling Layers on Solid and Porous Surfaces. Chemie Ingenieur Technik, 84 (1-2), pp. 46-53.

Ayres, J. G., Boyd, R., Cowie, H. and Hurley, J. F., 2011. Costs of occupational asthma in the UK. Thorax, 66 (2), pp. 128-133.

B

Bamford, R., 2012. Biopolymer supports for catalytic metal nanoparticles. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28, Il Ciocco, Barga.

Bamford, R., 2012. Biopolymer supports for catalytic metal nanoparticles. In: DTC Summer Showcase 2012, 2012-07-09 - 2013-04-13, Bath.

Bannister, C. D., Chuck, C. J., Hawley, J. G., Price, P. and Chrysafi, S. S., 2010. Factors affecting the decomposition of biodiesel under simulated engine sump oil conditions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224 (7), pp. 927-940.

Bannister, C. D., Chuck, C. J., Bounds, M. and Hawley, J. G., 2011. Oxidative stability of biodiesel fuel. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (D1), pp. 99-114.

Bannister, C., Hawley, J. G., Ali, H., Chuck, C. and Price, P., 2009. Quantifying the effects of biodiesel blend ratio, at varying ambient temperatures, on vehicle performance and emissions. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 2009-06-15 - 2009-06-17, Florence.

Bannister, C. D., Hawley, J. G., Ali, H. M., Chuck, C. J., Price, P., Chrysafi, S. S., Brown, A. and Pickford, W., 2010. The impact of biodiesel blend ratio on vehicle performance and emissions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224 (3), pp. 405-421.

Barata-Rodrigues, P. M., Mays, T. J. and Moggridge, G. D., 2003. Structured carbon adsorbents from clay, zeolite and mesoporous aluminosilicate templates. Carbon, 41 (12), pp. 2231-2246.

Barata-Rodrigues, P. M., Mays, T. J., Seaton, N. A. and Moggridge, G. D., 2002. Comparison of porous carbons developed via templating approaches. Studies in Surface Science and Catalysis, 144 (Characterization of ), pp. 139-146.

Barg, S., Perez, F.M., Ni, N., Do Vale Pereira, P., Maher, R.C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C. and Saiz, E., 2014. Mesoscale assembly of chemically modified graphene into complex cellular networks. Nature Communications, 5, 4328.

Barkley, S., Johnson, H., Eisenthal, R. and Hubble, J., 2004. Bubble-induced detachment of affinity-adsorbed erythrocytes. Biotechnology and Applied Biochemistry, 40 (2), pp. 145-149.

Bartalena, G., Grieder, R., Sharma, R. I., Zambelli, T., Muff, R. and Snedeker, J. G., 2011. A novel method for assessing adherent single-cell stiffness in tension:Design and testing of a substrate-based live cell functional imaging device. Biomedical Microdevices, 13 (2), pp. 291-301.

Batas, B. and Chaudhuri, J. B., 2001. The influence of operational parameters on lysozyme refolding using size-exclusion chromatography. Bioprocess and Biosystems Engineering, 24 (4), pp. 255-259.

Bavykin, D. V., Kolaczkowski, S. T., Lapkin, A. A. and Plucinski, P. K., 2005. Compact multichannel reactor for liquid phase oxidation of organic feedstocks. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Bavykin, D. V., Milsom, E. V., Marken, F., Kim, D. H., Marsh, D. H., Riley, D. J., Walsh, F. C., El-Abiary, K. H. and Lapkin, A. A., 2005. A novel cation-binding TiO2 nanotube substrate for electro- and bioelectrocatalysis. Electrochemistry Communications, 7 (10), pp. 1050-1058.

Bavykin, D., Lapkin, A., Plucinski, P., Friedrich, J. and Walsh, F., 2005. Intercalation of Molecular Hydrogen into the Walls of Multilayered TiO2 nanotubes. Journal of Physical Chemistry B, 109, pp. 19422-19427.

Bavykin, D., Lapkin, A., Plucinski, P., Friedrich, J. and Walsh, F., 2005. TiO2 nanotube supported ruthenium (III) hydrated oxide: A highly active catalyst for selective oxidation of alcohols with oxygen. Journal of Catalysis, 235, pp. 10-17.

Bavykin, D., Lapkin, A., Plucinski, P., Torrente-Murciano, L., Friedrich, J. and Walsh, F., 2006. Deposition of Pt, Pd, Ru and Au into the pores of TiO2 nanotubes. Topics in Catalysis, 39, pp. 151-160.

Bavykin, D. V., Friedrich, J. M., Lapkin, A. A. and Walsh, F. C., 2006. Stability of Aqueous Suspensions of Titanate Nanotubes. Chemistry of Materials, 18 (5), pp. 1124-1129.

Bavykin, D. V., Lapkin, A. A., Friedrich, J. M. and Walsh, F. C., 2005. Acid transformation of TiO2 nanotubes to nanoparticles. NSTI Nanotech 2005, NSTI Nanotechnology Conference & Trade Show, 2, pp. 655-658.

Bavykin, D. V., Lapkin, A. A., Plucinski, P. K., Friedrich, J. M. and Walsh, F. C., 2005. Reversible Storage of Molecular Hydrogen by Sorption into Multilayered TiO2 Nanotubes. Journal of Physical Chemistry B, 109 (41), pp. 19422-19427.

Bavykin, D. V., Lapkin, A. A., Plucinski, P. K., Torrente Murciano, L., Friedrich, J. M. and Walsh, F. C., 2006. Deposition of Pt, Pd, Ru and Au on the surfaces of titanate nanotubes. Topics in Catalysis, 39 (3-4), pp. 151-160.

Bavykin, D. V., Parmon, V. N., Lapkin, A. A. and Walsh, F. C., 2004. The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes. Journal of Materials Chemistry, 14 (22), pp. 3370-3377.

Bavykin, D. V., Gordeev, S. N., Moskalenko, A. V., Lapkin, A. A. and Walsh, F. C., 2005. Apparent two-dimensional behavior of TiO2 nanotubes revealed by light absorption and luminescence. Journal of Physical Chemistry B, 109 (18), pp. 8565-8569.

Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J., Chaudhuri, J. B. and Lewis, R. W. C., 2007. The Structure and Properties of Electroceramics for Bone Graft Substitution. In: The Structure and Properties of Electroceramics for Bone Graft Substitution, UKSB, 2007-01-01, London.

Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J. P., Chaudhuri, J. B. and Lewis, R. W. C., 2008. The structure and properties of electroceramics for bone graft substitution. Key Engineering Materials, 361-363 I, pp. 99-102.

Baxter, F., Turner, I., Bowen, C., Chaudhuri, J. and Gittings, J. P., 2008. The attachment of osteoblast-like cells to hydroxyapatite-barium titanate ceramics. In: 8th World Biomaterials Congress 2008. Vol. 2. , p. 1083.

Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J., 2009. A study of the morphology of human bone cells cultured on hydroxyapatite-barium titanate composites. In: Proceedings of the European Society of Biomaterials, 2009-09-01, Lausanne.

Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J. B., 2009. Piezoelectric Hydroxyapatite Composites for Bone Graft Substitution. In: Proceedings of the UK Society for Biomaterials, 2009-07-02 - 2009-07-03, The University of Ulster, Jordanstown, Northern Ireland.

Baxter, F., Turner, I. G., Bowen, C. R., Gittings, J. P. and Chaudhuri, J. B., 2009. An in vitro study of electrically active hydroxyapatite-barium titanate ceramics using Saos-2 cells. Journal of Materials Science: Materials in Medicine, 20 (8), pp. 1697-1708.

Behler, K., Havel, M., Mattia, D. and Gogotsi, Y., 2008. Self-assembled Multi-walled Carbon Nanotube Coatings In Nanotubes and Related Nanostructures. Materials Research Society Symposium Proceedings, 1057E, pp. 1057-1120.

Bekou, S. and Mattia, D., 2011. Wetting of nanotubes. Current Opinion in Colloid and Interface Science, 16 (4), pp. 259-265.

Bell, T. E., González-Carballo, J. M., Tooze, R. P. and Torrente-Murciano, L., 2015. Single-step synthesis of nanostructured γ-alumina with solvent reusability to maximise yield and morphological purity. Journal of Materials Chemistry A, 3 (11), pp. 6196-6201.

Bell, T., Gonzalez-Carballo, J. M., Tooze, R. and Torrente Murciano, L., 2015. Single-step synthesis of nanostructured g-alumina with solvent reusability to maximise yield and morphological purity. Journal of Materials Chemistry A, 3, pp. 6169-6201. Item availability may be restricted.

Bendall, S., Birdsall-Wilson, M., Jenkins, R., John Chew, Y.M. and Chuck, C. J., 2015. Showcasing chemical engineering principles through the production of biodiesel from spent coffee grounds. Journal of Chemical Education, 92 (4), pp. 683-687. Item availability may be restricted.

Bennett, C. A. and Crittenden, B. D., 2008. ACSAICHE 99128 Isokinetic phenomena in crude oil fouling. Abstracts of Papers of the American Chemical Society, 235.

Bennett, C. A. and Crittenden, B. D., 2008. Isokinetic phenomena in crude oil fouling. In: 235th ACS National Meeting, 2008-04-06 - 2008-04-10, New Orleans, LA.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: Tissue and Cell Engineering Society Annual Conference (TCES), 2013-07-23 - 2013-07-25, Cardiff.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: 9th Bath Biomechanics Symposium, 2013-09-16, Bath.

Benzeval, I., 2009. Development of responsive polymers for drug delivery applications. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Benzeval, I., Turner, I. and Ellis, M., 2011. Physical and numerical design of a fluidised bed bioreactor for stem cell expansion. In: Inaugural South West Regional Regenerative Medicine Meeting, 2011-09-12 - 2011-09-13, Bristol.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Tissue and Cell Engineering Society annual conference 2012, 2012-07-04 - 2012-07-06, Liverpool.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2011. Physical and numberical design of a fluidised bed bioreactor for stem cell expansion. In: World Conference on Regenerative Medicine, 2011-11-02 - 2011-11-04, Leipzig.

Bhalla, N., Di Lorenzo, M., Pula, G. and Estrela, P., 2014. Novel tools for protein phosphorylation analysis based on proton release detection. In: 24th Anniversary World Congress on Biosensors, 2014-05-27 - 2014-05-30, Melbourne.

Bhalla, N., Formisano, N., Miodek, A., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Integrated nanoplasmonic and field-effect sensing for kinase drug discovery applications. In: 2nd International Conference on Label-Free Technologies, 2015-03-12 - 2015-03-14, Boston.

Bhalla, N., Formisano, N., Miodek, A., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Integrated nanoplasmonic and field-effect devices for kinase drug discovery. In: 2nd International Conference on Label-Free Technologies, 2015-03-12 - 2015-03-14, Boston.

Bhalla, N., Formisano, N., Miodek, A., Jain, A., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Plasmonic ruler on field-effect devices for kinase drug discovery applications. Biosensors and Bioelectronics, 71, pp. 121-128. Item availability may be restricted.

Bhalla, N., Pathak, S., Bowen, C., Taylor, J., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Field-effect devices for kinase drug discovery. In: 4th International Conference on Bio-Sensing Technology, 2015-05-10 - 2015-05-13, Lisbon.

Bhardwaj, B., Perera, S. P. and Crittenden, B. D., 2000. Hybrid membrane adsorbents for fluidized bed separations. Chemical Engineering Research & Design, 78 (A8), pp. 1089-1097.

Bimbo, N. M., Hruzewicz-Kolodziejczyk, A., Ting, V. and Mays, T. J., 2011. High-pressure experimental data collection, analysis and modelling of hydrogen storage on nanoporous materials. In: MC10: Tenth International Conference on Materials Chemistry,, 2011-07-04 - 2011-07-07, Manchester.

Bimbo, N. M., Sharpe, J., Noguera Diaz, A. N., Physick, A., Holyfield, L., Rowlandson, J., Xu, W., Ladha, A., Ting, V. and Mays, T. J., 2014. Fuel Gas Storage : The Challenge of Hydrogen. In: ChemEngDayUK 2014, 2014-04-07 - 2014-04-08, Manchester.

Bimbo, N., Owens, S., Sharpe, J., Noguera Díaz, A. J., Rushworth, A., Smith, M., Berry, M., Hayes, P. and Mays, T., 2013. Hydrogen Energy Research in the Department of Chemical Engineering, University of Bath, UK. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26, London.

Bimbo, N., Physick, A., Noguera Diaz, A. N., Pugsley, A., Holyfield, L., Ting, V. and Mays, T., 2015. Adsorptive storage of methane - high volumetric and energy densities at moderate pressures and temperatures. In: Royal Society International Seminar - a UK-Japan meeting on Transforming Framework Materials Chemistry, 2015-03-02 - 2015-03-03, Milton Keynes.

Bimbo, N., Ting, V., Sharpe, J. and Mays, T., 2013. Analysis of optimal conditions for adsorptive hydrogen storage in microporous solids. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 437, pp. 113-119.

Bird, M., Evans, P. and Wu, D., 2007. The application of UF membranes to the filtration of model tea component solutions and reconstituted black tea powder. In: International Membrane Science and Technology Conference (IMSTEC'07), 2007-11-05 - 2007-11-09, Sydney.

Birks, T. A., Grogan, M. D. W., Xiao, L. M., Rollings, M. D., England, R. and Wadsworth, W. J., 2010. Silica aerogel in optical fibre devices. In: 12th International Conference on Transparent Optical Networks, ICTON 2010. IEEE.

Bishopp, S., 2014. A solvent-free alternative for green liquid-liquid biphasic oxidations. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Boix, M., Eslava, S., Machado, G., Saiz, E. and De Coninck, J., 2013. Fibrinogen and albumin adsorption on sol-gel calcium phosphate substrates measured by FTIR-ATR. European Cells and Materials, 26 (SUPPL.6), p. 112.

Bonné, P. A. C., Beerendonk, E. F., Van Der Hoek, J. P. and Hofman, J. A. M. H., 2000. Retention of herbicides and pesticides in relation to aging of RO membranes. Desalination, 132 (1-3), pp. 189-193.

Bonné, P. A. C., Hiemstra, P., van der Hoek, J. P. and Hofman, J. A. M. H., 2003. Is direct nanofiltration with air flush an alternative for household water production for Amsterdam? Desalination, 152 (1-3), pp. 263-269.

Bonné, P. A. C., Hofman, J. A. M. H. and Van Der Hoek, J. P., 2000. Scaling control of RO membranes and direct treatment of surface water. Desalination, 132 (1-3), pp. 109-119.

Bonné, P. A. C., Hofman, J. A. M. H. and Van der Hoek, J. P., 2002. Long term capacity of biological activated carbon filtration for organics removal. Water Science and Technology : Water Supply, 2 (1), pp. 139-146.

Bowen, C. R., Gittings, J., Turner, I. G., Baxter, F. and Chaudhuri, J. B., 2006. Dielectric and piezoelectric properties of hydroxyapatite-BaTiO3 composites. Applied Physics Letters, 89 (13), 132906.

Bradley, S., Di Lorenzo, M. and Kasprzyk-Hordern, B., 2014. Microbial Fuel Cells as On-Line Biosensors for Pharmaceuticals in Wastewater. In: Sensors in the Environment 2014, 2014-11-15 - 2014-11-16, London.

Brinkmann, T., Perera, S. P. and Thomas, W. J., 2001. An experimental and theoretical investigation of a catalytic membrane reactor for the oxidative dehydrogenation of methanol. Chemical Engineering Science, 56 (6), pp. 2047-2061.

Brustlein, S., Berto, P., Hostein, R., Ferrand, P., Billaudeau, C., Marguet, D., Muir, A., Knight, J. and Rigneault, H., 2011. Double-clad hollow core photonic crystal fiber for coherent Raman endoscope. Optics Express, 19 (13), pp. 12562-12568.

Bullen, R. A., Arnot, T. C., Lakeman, J. B. and Walsh, F. C., 2006. Biofuel cells and their development. Biosensors and Bioelectronics, 21 (11), pp. 2015-2045.

Burrows, A., Cassar, K., Friend, R. M. W., Mahon, M. F., Rigby, S. P. and Warren, J. E., 2005. Solvent hydrolysis and templating effects in the synthesis of metal-organic frameworks. CrystEngComm, 7 (89), pp. 548-550.

Burrows, A., Fisher, L., Richardson, C. and Rigby, S., 2011. Selective incorporation of ligands into mixed-component metal-organic frameworks. In: British Zeolite Association Spring Meeting 2011, 2011-04-10 - 2011-04-12, Edinburgh.

Burrows, A. D., Cassar, K., Düren, T., Friend, R. M. W., Mahon, M. F., Rigby, S. P. and Savarese, T. L., 2008. Syntheses, structures and properties of cadmium benzenedicarboxylate metal–organic frameworks. Dalton Transactions, 18, pp. 2465-2474.

Burrows, A. D., Fisher, L. C., Hodgson, D., Mahon, M. F., Cessford, N. F., Duren, T., Richardson, C. and Rigby, S. P., 2012. The synthesis, structures and reactions of zinc and cobalt metal-organic frameworks incorporating an alkyne-based dicarboxylate linker. CrystEngComm, 14 (1), pp. 188-192.

Burrows, A. D., Fisher, L. C., Richardson, C. and Rigby, S. P., 2011. Selective incorporation of functional dicarboxylates into zinc metal-organic frameworks. Chemical Communications, 47 (12), pp. 3380-3382.

Burrows, A. D., Fisher, L. C., Mays, T. J., Rigby, S. P., Ashbrook, S. E. and Dawson, D. M., 2015. Forthcoming. Post-synthetic modification of metal-organic frameworks through palladium-catalysed carbon-carbon bond formation. Journal of Organometallic Chemistry

C

Calabrò, F., Lee, K.P. and Mattia, D., 2013. Modelling flow enhancement in nanochannels : Viscosity and slippage. Applied Mathematics Letters, 26 (10), pp. 991-994.

Camus, O., Perera, S., Crittenden, B., van Delft, Y. C., Meyer, D. F., Pex, P., Kumakiri, I., Miachon, S., Dalmon, J. A., Tennison, S. and Chanaud, P., 2006. Ceramic membranes for ammonia recovery. AIChE Journal, 52 (6), pp. 2055-2065.

Camus, O., Crittenden, B., Perera, S., Mays, T., Sanchez Liarte, F., Patsos, A., Tennison, S. R. and Crezee, E., 2007. Non-Uniformities in Adsorbent Monoliths. In: 9th International Conference on Fundamentals of Adsorption, 2007-05-20 - 2007-05-25, Giardini Naxos, Sicily.

Camus, O., Perera, S., Crittenden, B., Leal, M., Tennison, S., Kumakiri, I., Miachon, S., Dalmon, J.-A. and Chanaud, P., 2005. Microporous ceramic membranes in industrial ammonia separation. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Cao, E., Greaves, M. and Rigby, S. P., 2009. Paper 2009-048: Phase Properties of Mobile Oil Zone in the THAI™- CAPRI™ Process. In: Canadian International Petroleum Conference, 2009-06-16 - 2009-06-18, Calgary, Alberta.

Cao, X., Eisenthal, R. and Hubble, J., 2002. Detachment strategies for affinity-adsorbed cells. Enzyme Microbial Technology, 31 (1-2), pp. 153-160.

Chadwick, D., Torrente Murciano, L. and , D. G. T. I., 2011. Selective catalytic oxidation of C1-C3 alkenes. WO 2011051643 (A1), May 2011.

Chapman, L. A. C., Shipley, R. J., Whiteley, J. P., Ellis, M. J., Byrne, H. M. and Waters, S. L., 2014. Optimising cell aggregate expansion in a perfused hollow fibre bioreactor via mathematical modelling. PLoS ONE, 9 (8), e105813.

Charalambous, M., Cowley, M., Geoghegan, F., Smith, F. M., Radford, E. J., Marlow, B. P., Graham, C. F., Hurst, L. D. and Ward, A., 2010. Maternally-inherited Grb10 reduces placental size and efficiency. Developmental Biology, 337 (1), pp. 1-8.

Chaudhuri, J., Fahey, E. M. and Binding, P., 2001. Refolding & Purification Of A Ukrinase Plasminogen Activator Fragment By Chromotography. Journal of Chromatography B - Analytical Technologies in the Biomedical and Life Sciences, 737, pp. 225-235.

Chaudhuri, J., Jarman-Smith, M. and Stewart, K., 2009. Bioreactors for Tissue Engineering. C12M1/40-WO2009037462 (A1), 26 March 2009.

Chaudhuri, J., Sakhamuru, K. and Hough, D. W., 2001. Protein Purification By Ultra Filtration Using a B-Galactosidase Fusion Tag. Biotechnology Progress, 16 (2), pp. 296-298.

Chaudhuri, J. B., Davey, J. and Price, G. J., 2004. A grafting approach to preparing new biocompatible polymer materials with potential as tissue engineering scaffolds. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry), 45 (1), pp. 814-815.

Chaudhuri, J. B. and Fahey, E., 2001. Use of size-exclusion chromatography for refolding recombinant proteins from inclusion bodies. Abstracts of Papers, 221st ACS National Meeting, San Diego, CA, United States, April 1-5, 2001

Chen, H., Yang, W., He, Y., Ding, Y., Zhang, L., Tan, C., Lapkin, A. A. and Bavykin, D. V., 2008. Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids). Powder Technology, 183 (1), pp. 63-72.

Chew, J. Y. M., Paterson, W. A., Wilson, D. I., Houfling, V. and Augustin, W., 2005. A method for measuring the strength of scale deposits on heat transfer surfaces. Asia-Pacific Journal of Chemical Engineering, 13 (1-2), pp. 21-30.

Chew, J., 2004. CFD Studies of Dynamic Gauging. Chemical Engineering Science, 59 (16), pp. 3381-3398.

Chew, J., 2005. Mechanisms in the Solvent Cleaning of Emulsion Polymerization Reactor Surfaces. Industrial and Engineering Chemistry Research, 44 (13), pp. 4605-4616.

Chew, J., 2006. Solvent-based cleaning of emulsion polymerization reactors. Chemical Engineering Journal, 117 (1), pp. 61-69.

Chew, J., Ian Wilson, D. and Paterson, W.R., 2007. Fluid dynamic gauging : A new technique for studying membrane fouling. Water Science and Technology : Water Supply, 7 (5-6).

Chew, J., Joshi, H.M., Kazarian, S.G., Millan-Agorio, M., Tay, F.H. and Venditti, S., 2015. Crude Oil Fouling Deposit Characterization, Measurements, and Modeling : Deposit Characterization and Measurements. In: Coletti, F. and Hewitt, G., eds. Crude Oil Fouling. Elsevier, pp. 95-178.

Chew, J., Saikhwan, P., Ian Wilson, D., Paterson, W.R. and Gould, A., 2007. Swelling and Its Suppression in the Cleaning of Polymer Fouling Layers. Industrial and Engineering Chemistry Research, 46 (14), pp. 4846-4855.

Chew, J., Saikhwan, P., Wilson, D.I., Paterson, W.R. and Gould, A., 2007. Fluid dynamic gauging: a technique for studying the cleaning of food process surfaces. Food Manufacturing Efficiency

Chew, J., Wilson, D.I. and Paterson, W. R., 2004. Fluid dynamic gauging for measuring the strength of soft deposits. Journal of Food Engineering, 65 (2), pp. 175-187.

Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2007. Fluid dynamic gauging: A new tool to study deposition on porous surfaces. Journal of Membrane Science, 296 (1-2), pp. 29-41.

Chigada, P. I. and Mann, R., 2008. A Network-of-Voids Model to Assess Wall Flow Patterns and Heat Transfer for Low Aspect Ratio Packed-Bed Reactors. International Journal of Chemical Reactor Engineering, 6, A84.

Chigada, P. I., Wang, J., Al-Duri, B., Wood, J. and Rigby, S. P., 2010. Modelling of pore structure evolution during catalyst deactivation and comparison with experiment. Chemical Engineering Science, 65 (20), pp. 5550-5558.

Christgen, B., Roche, I., Di Lorenzo, M., Scott, K. and Curtis, T. P., 2008. Advances in Microbial Fuel Cells through Cathode, Anode and Membrane Development. In: Fuel Cell Science and Technology, 2008-10-07 - 2008-10-08, Vienna.

Chua, H. C., Arnot, T. C. and Howell, J. A., 2002. Controlling fouling in membrane bioreactors operated with a variable throughput. Desalination, 149 (1-3), pp. 225-229.

Chua, L. M., 2010. Deactivation of PtH-ZSM-5 Bifunctional Catalysts by Coke Formation during Benzene Alkylation with Ethane. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Chuck, C., Wagner, J. and Jenkins, R., 2015. Biofuels from Microalgae. In: Letcher, T. M., Scott, J. L. and Patterson, D. A., eds. Chemical Processes for a Sustainable Future. Cambridge: Royal Society of Chemistry, pp. 425-442.

Chuck, C. J., Parker, H. J., Jenkins, R. W. and Donnelly, J., 2013. Renewable biofuel additives from the ozonolysis of lignin. Bioresource Technology, 143, pp. 549-554. Item availability may be restricted.

Coombs OBrien, J., 2015. Identification of Natural Materials for Tissue Engineering. In: Enabling Healthcare Technologies: Synthesis, Biomaterials and Sensing, 2015-01-28 - 2015-01-28.

Cornelissen, E. R., Verdouw, J., Gijsbertsen-Abrahamse, A. J. and Hofman, J. A. M. H., 2005. A nanofiltration retention model for trace contaminants in drinking water sources. Desalination, 178 (1-3 SPEC. ISS.), pp. 179-192.

Courtenay, J., 2015. Surface Modified Cellulose Scaffolds for Tissue Engineering. In: 3rd South West Regional Regenerative Medicine Meeting, 2015-09-22 - 2015-09-23, Bristol.

Crezee, E., Tennison, B. D. and Crittenden, B. D., 2005. VOCs and NOx: better control and lower costs. Chemical Engineering Education

Crezee, E., Tennison, S., Camus, O., Crittenden, B., Perera, S., Sanchez Liarte, F., Black, S. and Phillips, P. L., 2007. Electrically regenerable chemical defence system based on carbon monolithic adsorbers. In: 9th Symposium on Protection against Chemical and Biological Warfare Agents, 2007-05-22 - 2007-05-25, Gothenburg.

Crezee, E., Tennison, S. R., Rawlinson, A. P., Place, R. N., Crittenden, B. D. and Perera, S. P., 2005. Electrically regenerable carbon monolithic adsorption system for the recovery and recycle of volatile organic chemicals (VOCs). In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Crittenden, B. D., 2003. Waste minimization in industry. In: Encyclopedia of Life Support Systems (EOLSS). , p. 16.

Crittenden, B. D., Lau, A., Brinkmann, T. and Field, R. W., 2005. Oscillatory flow and axial dispersion in packed beds of spheres. Chemical Engineering Science, 60 (1), pp. 111-122.

Crittenden, B., Perera, S., Mays, T., Camus, O. and Tennison, S., 2005. Monolithic adsorbents in sustainable development. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Crittenden, B. D., Camus, O., Perera, S. P., Mays, T. J., Sanchez-Liarte, F., Tennison, S. R. and Crezee, E., 2011. Nonuniform channels in adsorbent monoliths. AIChE Journal, 57 (5), pp. 1163-1172.

Crittenden, B. D., Kolaczkowski, S. T., Takemoto, T. and Phillips, D. Z., 2009. Crude Oil Fouling in a Pilot-Scale Parallel Tube Apparatus. Heat Transfer Engineering, 30 (10-11), pp. 777-785.

Crittenden, B. D., Patton, A., Jouin, C., Perera, S., Tennison, S. and Echevarria, J. A. B., 2005. Carbon monoliths: a comparison with granular materials. Adsorption, 11 (1), pp. 537-541.

Crittenden, B. D., Yang, M., Dong, L., Hanson, R., Jones, J., Kundu, K., Harris, J., Klochok, O., Arsenyeva, O. and Kapustenko, P., 2015. Crystallization fouling with enhanced heat transfer surfaces. Heat Transfer Engineering, 36 (7-8), pp. 741-749.

Cui, Z. F. and Chaudhuri, J. B., 2004. Tissue engineering. Food and Bioproducts Processing, 82 (C2), p. 103.

D

D'Hooge, F., Rogalle, D., Thatcher, M. J., Perera, S., van den Elsen, J. M. H., Jenkins, T. A., James, T. and Fossey, J., 2008. Polymerisation resistant synthesis of methacrylamido phenylboronic acids. Polymer, 49 (16), pp. 3362-3365.

Davidson, A., Al-Qallaf, B. and Das, D. B., 2008. Transdermal drug delivery by coated microneedles: Geometry effects on effective skin thickness and drug permeability. Chemical Engineering Research & Design, 86 (11A), pp. 1196-1206.

Davidson, A. J., 2011. Bioartificial livers: theoretical methods to improve and optimize design. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2012. A theoretical approach to zonation in a bioartificial liver. Biotechnology and Bioengineering, 109 (1), pp. 234-243.

De Bank, P., Jones, M. and Ellis, M., 2009. Polymeric scaffolds for regenerative medicine. In: Mattiasson, B., Kumar, A. and Galaev, I. Y., eds. Macroporous Polymers: Production Properties and Biotechnological/Biomedical Applications. CRC Press, pp. 467-495.

Di Lorenzo, M., Thomson, A. R., Schneider, K., Cameron, P. J. and Ieropoulosc, I., 2014. A small-scale air-cathode microbial fuel cell for on-line monitoring of water quality. Biosensors and Bioelectronics, 62, pp. 182-188.

Di Lorenzo, M., Curtis, T. P. and Scott, K., 2008. Development of a single chamber microbial fuel cell as BOD sensor. In: Microbial Fuel Cell First International Symposium, 2008-05-19 - 2008-05-27, The Pennsylvania State University, Penn State.

Di Lorenzo, M., Curtis, T. P. and Scott, K., 2008. Development of a single chamber microbial fuel cell as biosensor of the organic content in wastewaters. In: Workshop on Biological Fuel Cells, 2008-07-23 - 2008-07-25, University of Surrey, Guildford.

Di Lorenzo, M., Curtis, T. P., Head, I. M. and Scott, K., 2009. A single-chamber microbial fuel cell as a biosensor for wastewaters. Water Research, 43 (13), pp. 3145-3154.

Di Lorenzo, M., Curtis, T. P., Head, I. M., Velasquez-Orta, S. B. and Scott, K., 2009. A single chamber packed bed microbial fuel cell biosensor for measuring organic content of wastewater. Water Science & Technology, 60 (11), pp. 2879-2887.

Di Lorenzo, M., Hidalgo, A., Haas, M. and Bornscheuer, U. T., 2005. Heterologous Production of Functional Forms of Rhizopus oryzae Lipase in Escherichia coli. Applied and Environmental Microbiology, 71 (12), pp. 8974-8977.

Di Lorenzo, M., Hidalgo, A., Molina, R., Hermoso, J. A., Pirozzi, D. and Bornscheuer, U. T., 2007. Enhancement of the Stability of a Prolipase from Rhizopus oryzae toward Aldehydes by Saturation Mutagenesis. Applied and Environmental Microbiology, 73 (22), pp. 7291-7299.

Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G. and Bornscheuer, U. T., 2006. Stabilization of lipase from Rhizopus oryzae in the presence of commercial triglycerides. In: Third International Congress on Biocatalysis, Biocat 2006, 2006-09-03 - 2006-09-07, Hamburg.

Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G. and Bornscheuer, U. T., 2006. Stabilization of lipase from Rhizopus oryzae in the presence of commercial triglycerides. In: Symposium on Protein Design and Evolution for Byocatalysis, 2006-08-30 - 2006-09-01, Greifswald.

Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G., Haas, M. J. and Bornscheuer, U. T., 2005. Active expression of lipase forms from Rhizopus delemar in E. coli. In: BioPerspectives 2005, 2005-05-10 - 2005-05-12, Wiesbaden.

Di Lorenzo, M., Pirozzi, D. and Greco, G., 2006. Lipases in the oleochemical industry. In: 17th International Congress of Chemical and Process Engineering, 2006-08-27 - 2006-08-31, Praha.

Di Lorenzo, M., Pirozzi, D., Greco, G. and Hidalgo, A., 2005. Stabilization of a lipase from Rhizopus delemar in the presence of commercial triglycerides. In: BioPerspectives 2005, 2005-05-10 - 2005-05-12, Wiesbaden.

Di Lorenzo, M., Scott, K., Curtis, T. P. and Head, I. M., 2010. Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell. Chemical Engineering Journal, 156 (1), pp. 40-48.

Di Lorenzo, M., Scott, K., Curtis, T. P., Katuri, K. P. and Head, I. M., 2009. Continuous feed microbial fuel cell using an air cathode and a disc anode stack for wastewater treatment. Energy & Fuels, 23 (11), pp. 5707-5716.

Di Lorenzo, M., Velasquez-Orta, S., Christgen, B., Scott, K. and Curtis, T. P., 2008. Performance of the anode compartment when treating complex wastewaters. In: Microbial Fuel Cell First International Symposium, 2008-05-19 - 2008-05-27, The Pennsylvania State University, Penn State.

Diederich, V. E. G., Studer, P., Kern, A., Lattuada, M., Storti, G., Sharma, R.I., Snedeker, J.G. and Morbidelli, M., 2013. Bioactive polyacrylamide hydrogels with gradients in mechanical stiffness. Biotechnology and Bioengineering, 110 (5), pp. 1508-1519.

Ding, Y., Chen, H., He, Y., Lapkin, A., Yeganeh, M., Siller, L. and Butenko, Y. V., 2007. Forced convective heat transfer of nanofluids. Advanced Powder Technology, 18 (6), pp. 813-824.

Dong, L. L., Cheung, C. S. and Leung, C. W., 2011. Combustion optimization of a port-array inverse diffusion flame jet. Energy, 36 (5), pp. 2834-2846.

Dyan, A., Duchateau, G., Eslava, S., Stehle, J.L., Damiani, D. and Piombini, H., 2009. Transmission measurements in rapid growth KDP and DKDP crystals. Journal of Modern Optics, 56 (1), pp. 45-49.

E

Edler, K. J., Arrowsmith, M., Hamilton, M. and Rigby, S. P., 2005. Modeling the fractal growth of templated, mesoporous silica films. Journal of Physical Chemistry B, 109 (13), pp. 6294-6303.

Elfeky, S. A., D'Hooge, F., Poncel, L., Chen, W. B., Perera, S. P., van den Elsen, J. M. H., James, T. D., Jenkins, A. T. A., Cameron, P. J. and Fossey, J. S., 2009. A surface plasmon enhanced fluorescence sensor platform. New Journal of Chemistry, 33 (7), pp. 1466-1469.

Elhweg, B., Burns, I. W., Chew, Y. M. J., Martin, P. J., Russell, A. B. and Wilson, D. I., 2009. Viscous dissipation and apparent wall slip in capillary rheometry of ice cream. Food and Bioproducts Processing, 87 (C4), pp. 266-272.

Elkilani, A., Bouhamra, W. and Crittenden, B. D., 2001. An indoor air quality model that includes the sorption of VOCs on fabrics. Process Safety and Environmental Protection, 79 (B4), pp. 233-243.

Ellis, M. J., Tai, C. C., Perera, S. and Chaudhuri, J. B., 2005. Biodegradable hollow fibre membranes for clinical scale bone tissue constructs. International Journal of Experimental Pathology, 86 (3), A16-A17.

Ellis, M.J., 2013. Two- and three-dimensional tissue culture bioprocessing methods for soft tissue engineering. In: Standardisation in Cell and Tissue Engineering: Methods and Protocols. Woodhead Publishing Ltd., pp. 34-53.

Ellis, M. J., Forsey, R. and Chaudhuri, J. B., 2010. Post-culture treatment protocols for PLGA membrane scaffolds. Biotechnology Letters, 32 (2), pp. 215-222.

Elías-Maxil, J.A., Van Der Hoek, J.P., Hofman, J. and Rietveld, L., 2014. A bottom-up approach to estimate dry weather flow in minor sewer networks : Water Science and Technology. Water Science and Technology, 69 (5), pp. 1059-1066.

Emanuelsson, E. A. C., Emanuelsson, M. A. E., Patterson, D. A., Castro, P. M. L. and Livingston, A. G., 2007. Microbiology for chemical engineers: from macro to micro scale. Asia-Pacific Journal of Chemical Engineering, 2 (5), pp. 448-454.

England, R., 2007. Developments and applications of membranes in chemical and bioprocess engineering. Journal of Applied Sciences, 7 (15), pp. 1991-1997.

Esconjauregui, S., Fouquet, M., Bayer, B.C., Eslava, S., Khachadorian, S., Hofmann, S. and Robertson, J., 2011. Manipulation of the catalyst-support interactions for inducing nanotube forest growth. Journal of Applied Physics, 109 (4).

Esconjauregui, S., Xie, R., Guo, Y., Pfaendler, S.M.-L., Fouquet, M., Gillen, R., Cepek, C., Castellarin-Cudia, C., Eslava, S. and Robertson, J., 2013. Electrical conduction of carbon nanotube forests through sub-nanometric films of alumina. Applied Physics Letters, 102 (11).

Eslava, S., Baklanov, M.R., Iacopi, F., Brongersma, S.H., Kirschhock, C.E.A. and Maex, K., 2006. Zeolite low-k film properties dependence on nanocrystal size. Materials Research Society Symposium Proceedings, 914, pp. 421-426.

Eslava, S., Baklanov, M.R., Kirschhock, C.E.A., Iacopi, F., Aldea, S., Maex, K. and Martens, J.A., 2007. Characterization of a molecular sieve coating using ellipsometric porosimetry. Langmuir, 23 (26), pp. 12811-12816.

Eslava, S., Baklanov, M.R., Neimark, A.V., Iacopi, F., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Evidence of large voids in pure-silica-zeolite low-k dielectrics synthesized by spin-on of nanoparticle suspensions. Advanced Materials, 20 (16), pp. 3110-3116.

Eslava, S., Baklanov, M.R., Urrutia, J., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Nanoporous organosilicate films prepared in acidic conditions using tetraalkylammonium bromide porogens. Advanced Functional Materials, 18 (20), pp. 3332-3339.

Eslava, S., Delahaye, S., Baklanov, M.R., Iacopi, F., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Reaction of trimethylchlorosilane in spin-on Silicalite-1 zeolite film. Langmuir, 24 (9), pp. 4894-4900.

Eslava, S., Eymery, G., Marsik, P., Iacopi, F., Kirschhock, C.E.A., Maex, K., Martens, J.A. and Baklanov, M.R., 2008. Optical property changes in low- k films upon ultraviolet-assisted curing. Journal of the Electrochemical Society, 155 (5).

Eslava, S., Goodwill, B.P.R., McPartlin, M. and Wright, D.S., 2011. Extending the family of titanium heterometallic-oxo-alkoxy cages. Inorganic Chemistry, 50 (12), pp. 5655-5662.

Eslava, S., Hengesbach, F., McPartlin, M. and Wright, D.S., 2010. Heterometallic cobalt(ii)-titanium(iv) oxo cages; Key building blocks for hybrid materials. Chemical Communications, 46 (26), pp. 4701-4703.

Eslava, S., Iacopi, F., Baklanov, M.R., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2007. Ultra-violet-assisted cure of spin-on silicalite-1 films. In: Studies in Surface Science and Catalysis.Vol. 170. , pp. 594-599.

Eslava, S., Iacopi, F., Baklanov, M.R., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2007. Ultraviolet-assisted curing of polycrystalline pure-silica zeolites:Hydrophobization, functionalization, and cross-linking of grains. Journal of the American Chemical Society, 129 (30), pp. 9288-9289.

Eslava, S., Iacopi, F., Urbanowicz, A.M., Kirschhock, C.E.A., Maex, K., Martens, J.A. and Baklanov, M.R., 2008. Ultraviolet-assisted curing of organosilicate glass low-k dielectric by excimer lamps. Journal of the Electrochemical Society, 155 (11).

Eslava, S., Kirschhock, C.E.A., Aldea, S., Baklanov, M.R., Iacopi, F., Maex, K. and Martens, J.A., 2009. Characterization of spin-on zeolite films prepared from Silicalite-1 nanoparticle suspensions. Microporous and Mesoporous Materials, 118 (1-3), pp. 458-466.

Eslava, S., McPartlin, M., Thomson, R.I., Rawson, J.M. and Wright, D.S., 2010. Single-source materials for metal-doped titanium oxide:Syntheses, structures, and properties of a series of heterometallic transition-metal titanium oxo cages. Inorganic Chemistry, 49 (24), pp. 11532-11540.

Eslava, S., Papageorgiou, A.C., Beaumont, S.K., Kyriakou, G., Wright, D.S. and Lambert, R.M., 2010. Synthesis, characterization, and surface tethering of sulfide- functionalized Ti-oxo-alkoxy cages. Chemistry of Materials, 22 (18), pp. 5174-5178.

Eslava, S., Seo, J.W., Kirschhock, C.E.A., Baklanov, M.R., Maex, K. and Martens, J.A., 2010. Comment on MEL-type pure-silica zeolite nanocrystals prepared by an evaporation-assisted two-stage synthesis method as ultra-low-k materials. Advanced Functional Materials, 20 (15), pp. 2377-2379.

Eslava, S., Urrutia, J., Busawon, A.N., Baklanov, M.R., Iacopi, F., Maex, K., Kirschhock, C.E.A. and Martens, J.A., 2009. Effects of silica sources on nanoporous organosilicate films templated with tetraalkylammonium cations. In: Materials Research Society Symposium Proceedings.Vol. 1156. , pp. 53-58.

Eslava, S., Urrutia, J., Busaworv, A.N., Baklanov, M.R., Iacopi, F., Aldea, S., Maex, K., Martens, J.A. and Kirschhock, C.E.A., 2008. Zeolite-inspired low-k dielectrics overcoming limitations of zeolite films. Journal of the American Chemical Society, 130 (51), pp. 17528-17536.

Eslava, S., Zhang, L., Esconjauregui, S., Yang, J., Vanstreels, K., Baklanov, M.R. and Saiz, E., 2013. Metal-organic framework ZIF-8 films as low-κ dielectrics in microelectronics. Chemistry of Materials, 25 (1), pp. 27-33.

Evans, P. J. and Bird, M. R., 2006. Solute-membrane fouling interactions during the ultrafiltration of black tea liquor. Food and Bioproducts Processing, 84 (C4), pp. 292-301.

Evans, P. J. and Bird, M. R., 2010. The role of black tea feed conditions upon ultrafiltration performance during membrane fouling and cleaning. Journal of Food Process Engineering, 33 (2), pp. 309-332.

Evans, P. J., Bird, M. R., Rogers, D. and Wright, C. J., 2009. Measurement of polyphenol-membrane interaction forces during the ultrafiltration of black tea liquor. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 335 (1-3), pp. 148-153.

Evans, P. and Bird, M., 2006. Solute – membrane interactions during the ultrafiltration of black tea liquor. In: Fouling, Cleaning and Disinfection 2006, 2006-03-20 - 2006-03-22, Jesus College, Cambridge.

Evans, P. and Bird, M., 2007. The fouling and cleaning of ultrafiltration membranes for black tea liquor clarification. In: European Congress of Chemical Engineering (ECCE) – 6, 2007-09-16 - 2007-09-21, Copenhagen.

Evans, P. J., 2008. Membrane – Solute – Cleaning agent interaction during the ultrafiltration of black tea liquor. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Evans, P. J., Bird, M. R., Pihlajamaeki, A. and Nystroem, M., 2008. The influence of hydrophobicity, roughness and charge upon ultrafiltration membranes for black tea liquor clarification. Journal of Membrane Science, 313 (1-2), pp. 250-262.

Evbuomwan, I., 2009. The structural characterisation of porous media for use as model reservoir rocks, adsorbents and catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.

F

Fan, X. L., Lapkin, A. A. and Plucinski, P. K., 2009. Liquid phase hydrogenation in a structured multichannel reactor. Catalysis Today, 147 (Supplement), S313-S318.

Fan, X. L., Manchon, M. G., Wilson, K., Tennison, S., Kozynchenko, A., Lapkin, A. A. and Plucinski, P. K., 2009. Coupling of Heck and hydrogenation reactions in a continuous compact reactor. Journal of Catalysis, 267 (2), pp. 114-120.

Fan, X., 2010. Selective Catalytic Hydrogenation in a Structured Compact Multifunctional Reactor. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Fan, X., Chen, H., Ding, Y., Plucinski, P. K. and Lapkin, A. A., 2008. Potential of nanofluids' to further intensify microreactors. Green Chemistry, 10 (6), pp. 670-677.

Ferreiro-Rangel, C. A., Seaton, N. A. and Düren, T., 2014. Grand-canonical Monte Carlo adsorption studies on SBA-2 periodic mesoporous silicas. Journal of Physical Chemistry C, 118 (44), pp. 25441-25446.

Field, R., Hang, S. and Arnot, T., 1994. The influence of surfactant on water flux through microfiltration membranes. Journal of Membrane Science, 86 (3), pp. 291-304.

Field, R. and Howell, J. A., 2001. Treating phenolic pollutants with membranes. Tce, 717, pp. 36-37.

Firth, B., 2014. Biodiesel Production in Fixed-Bed Monolithic Reactors. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Firth, B., Kolaczkowski, S. T., Davidson, M. G. and Awdry, S., 2012. Biodiesel Production in Fixed-Bed Catalytic Reactors. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28, Il Ciocco, Barga.

Firth, B. P., Kolaczkowski, S. T., Davidson, M. G. and Awdry, S., 2013. Biodiesel Production in Fixed-Bed Catalytic Reactors. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26, London.

Foo, R., Vazhnova, T., Lukyanov, D. B., Millington, P., Collier, J., Rajaram, R. and Golunski, S., 2015. Formation of reactive Lewis acid sites on Fe/WO3–ZrO2 catalysts for higher temperature SCR applications. Applied Catalysis B: Environmental, 162, pp. 174-179.

Forgacs, G., Alinezhad, S., Mirabdollah, A., Feuk-Legarstedt, E. and Sárvári Horváth, I., 2011. Biological treatment of chicken feather waste for improved biogas production. Journal of Environmental Sciences, 23 (10), pp. 1747-1753.

Forgacs, G., Lundin, M., Taherzadeh, M. J. and Sárvári Horváth, I., 2013. Pretreatment of chicken feather waste for improved biogas production. Biotechnology and Applied Biochemistry, 169 (7), pp. 2016-2028.

Forgacs, G., Pourbafrani, M., Niklasson, C., Taherzadeh, M. J. and Sárvári Horváth, I., 2012. Methane production from citrus wastes:Process development and cost estimation. Journal of Chemical Technology & Biotechnology, 87 (2), pp. 250-255.

Forgacs, G., Niklasson, C., Sárvári Horváth, I. and Taherzadeh, M. J., 2014. Methane production from feather waste pretreated with Ca(OH)2:Process development and economical analysis. Waste and Biomass Valorization, 5 (1), pp. 65-73.

Forsey, R. W. and Chaudhuri, J. B., 2009. Validity of DNA analysis to determine cell numbers in tissue engineering scaffolds. Biotechnology Letters, 31 (6), pp. 819-823.

Forsey, R. W., Tare, R., Oreffo, R. O. C. and Chaudhuri, J. B., 2012. Perfusion bioreactor studies of chondrocyte growth in alginate-chitosan capsules. Biotechnology and Applied Biochemistry, 59 (2), pp. 142-152.

Freedman, J. R., Mattia, D., Korneva, G., Gogotsi, Y., Friedman, G. and Fontecchio, A. K., 2007. Magnetically assembled carbon nanotube tipped pipettes. Applied Physics Letters, 90 (10), 103108/1-103108/3.

Freger, V., Arnot, T. C. and Howell, J. A., 2000. Separation of concentrated organic/inorganic mixtures by nanofiltration. Journal of Membrane Science, 178 (1-2), 185–193.

Frijns, J., Hofman, J. and Nederlof, M., 2013. The potential of (waste)water as energy carrier : Energy Conversion and Management. Energy Convers. Manage., 65, pp. 357-363.

G

Gan, Q., Howell, J. A., Field, R. W., England, R., Bird, M. R., O'Shaughnessy, C. L. and MeKechinie, M. T., 2001. Beer clarification by microfiltration - product quality control and fractionation of particles and macromolecules. Journal of Membrane Science, 194 (2), pp. 185-196.

Gao, C.-H., Chen, Y.-N., Pan, L.-X., Lei, F., Long, B., Hu, L.-Q., Zhang, R.-C., Ke, K. and Huang, R.-M., 2014. Two new cyclic tetrapeptides from deep-sea bacterium bacillus amyloliquefaciens GAS 00152. Journal of Antibiotics, 67, pp. 541-543.

García, T., Murillo, R., Agouram, S., Dejoz, A., Lázaro, M. J., Torrente Murciano, L. and Solsona, B., 2012. Highly dispersed encapsulated AuPd nanoparticles on ordered mesoporous carbons for the direct synthesis of H2O2 from molecular oxygen and hydrogen. Chemical Communications, 48 (43), pp. 5316-5318.

García, T., Agouram, S., Dejoz, A., Sánchez-royo, J. F., Torrente-murciano, L. and Solsona, B., 2015. Enhanced H2O2 production over Au-rich bimetallic Au–Pd nanoparticles on ordered mesoporous carbons. Catalysis Today, 248, pp. 48-57.

García-García, F. R., Torrente Murciano, L., Chadwick, D. and Li, K., 2012. Hollow fibre membrane reactors for high H2 yields in the WGS reaction. Journal of Membrane Science, 405-406, pp. 30-37.

García-Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitián, F. and Saiz, E., 2015. Printing in Three Dimensions with Graphene. Advanced Materials, 27 (10), pp. 1-6. Item availability may be restricted.

García-Tuñon, E., Franco, J., Eslava, S., Bhakhri, V., Saiz, E., Giuliani, F. and Guitián, F., 2013. Synthesis and optimization of the production of millimeter-sized hydroxyapatite single crystals by Cl-OH ion exchange. Journal of the American Ceramic Society, 96 (3), pp. 759-765.

Genet, M., Houmard, M., Eslava, S., Saiz, E. and Tomsia, A.P., 2013. Erratum to A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting:Possibilities and limits. Journal of the European Ceramic Society, 33 (8), p. 1393.

Genet, M., Houmard, M., Eslava, S. and Tomsia, A.P., 2013. A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting:Possibilities and limits. Journal of the European Ceramic Society, 33 (4), pp. 679-688.

Ghazali, N. F., Patterson, D. A. and Livingston, A. G., 2004. Elucidation of the mechanism of chiral selectivity in diastereomeric salt formation using organic solvent nanofiltration. Chemical Communications, 2004 (8), pp. 962-963.

Gibbons, E., Irwin, J., Livingston, A. G., Muir, J. C., Patterson, D., Roengpithya, C. and Taylor, P. C., 2005. Dynamic kinetic resolution of racemates using membrane-separated catalysts. Abstracts of Papers of the American Chemical Society, 229, U550.

Gijsbertsen-Abrahamse, A. J., Cornelissen, E. R. and Hofman, J. A. M. H., 2006. Fiber failure frequency and causes of hollow fiber integrity loss. Desalination, 194 (1-3), pp. 251-258.

Gilbank, A., 2015. Ceramic Nanostructured Catalysts. Thesis (Doctor of Philosophy (PhD)).

Gillard, I. C. and Mays, T. J., 2008. Hydrogen energy in the information age. In: 17th World Hydrogen Energy Conference 2008, WHEC 2008. , pp. 1255-1258.

Gimeno, O., Plucinski, P., Kolaczkowski, S. T., Rivas, F. J. and Alvarez, P. M., 2003. Removal of the Herbicide MCPA by Commercial Activated Carbons: Equilibrium, Kinetics, and Reversibility. Industrial & Engineering Chemistry Research, 42 (5), pp. 1076-1086.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R., Cartmell, S. and Chaudhuri, J., 2009. Influence of porosity on polarisation and electrical properties of hydroxyapatite based ceramics. Ferroelectrics, 390 (1), pp. 168-176.

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. and Chaudhuri, J., 2007. Characterisation of ferroelectric-calcium phosphate composites and ceramics. Journal of the European Ceramic Society, 27 (13-15), pp. 4187-4190.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2009. Electrical characterization of hydroxyapatite-based bioceramics. Acta Biomaterialia, 5 (2), pp. 743-754.

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2008. Polarisation behaviour of calcium phosphate based ceramics. In: Marques, A. T., Silva, A. F., Baptista, A. P. M., Sá, C., Alves, F. J. L., Malheiros, L. F. and Vieira, M., eds. Advanced Materials Forum IV: Materiais 2007. Zurich: Trans Tech Publications, pp. 91-95.

Goller, B., Polisski, S., Moskalenko, A., Loponov, K. and Kovalev, D., 2008. Photoexcited silicon nanocrystals as multifunctional spin-flip activator. ECS Transactions, 16 (3), pp. 337-344.

Gopinathan, N., Greaves, M., Rigby, S.P. and Wood, J., 2013. Investigation of the problems with using gas adsorption to probe catalyst pore structure evolution during coking. Journal of Colloid and Interface Science, 393 (1), pp. 234-240.

Gopinathan, N., 2012. Development of Catalyst Characterisation Techniques. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Gopinathan, N., Greaves, M., Lowe, J. P., Wood, J. and Rigby, S. P., 2012. Determination of the location of coke in catalysts by a novel NMR-based, liquid-porosimetry approach. Journal of Colloid and Interface Science, 381 (1), pp. 164-170.

Gopinathan, N., Rigby, S., Greaves, M., Lowe, J., Wood, J. and Dong, L. L., 2011. Determination of the spatial location of coke in catalysts by a novel NMR approach. In: Fantazzini, P., Bortolotti, V., Karger, J. and Galvosas, P., eds. 10th International Bologna Conference on Magnetic Resonance in Porous Media, 2010-09-12 - 2010-09-16, Leipzig.

Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Letzelter, N., York, D. W. and Wilson, D. I., 2012. Elucidating enzyme-based cleaning of protein soils (gelatine and egg yolk) using a scanning fluid dynamic gauge. Chemical Engineering Research & Design, 90 (1), pp. 162-171.

Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Wilson, D. I. and York, D. W., 2010. Studies into the swelling of gelatine films using a scanning fluid dynamic gauge. Food and Bioproducts Processing, 88 (C4), pp. 357-364.

Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Wilson, D. I. and York, D. W., 2010. A scanning fluid dynamic gauging technique for probing surface layers. Measurement Science & Technology, 21 (8), 085103.

Gordon, P. W., Schöler, M., Föste, H., Helbig, M., Augustin, W., Chew, Y. M. J., Scholl, S., Majschak, J.-P. and Wilson, D. I., 2014. A comparison of local phosphorescence detection and fluid dynamic gauging methods for studying the removal of cohesive fouling layers : effect of layer roughness. Food and Bioproducts Processing, 92 (1), pp. 46-53.

Greaves, M. and Bentaher, A. H., 2007. Exothermicity characteristics of wolf lake heavy oil, Athabasca tar sand and clair medium heavy oil. Journal of Canadian Petroleum Technology, 46 (9), pp. 16-19.

Greaves, M., Turta, A. T., Ayasse, C. and Saghr, A. M., 2001. THAI-New Injection Technology For heavy Oil Recovery & In Situ Upgrading. Transactions of the Institute of Chemical Engineers: Part A, 40 (3), pp. 38-47.

Greaves, M. and Xia, T. X., 2004. Downhole catalytic process for upgrading heavy oil: Produced oil properties and composition. Journal of Canadian Petroleum Technology, 43 (9), pp. 25-30.

Greaves, M. and Xia, T. X., 2010. Laboratory studies of producing hydrogen and incremental oil from light oil reservoirs using downhole gasification. Journal of Canadian Petroleum Technology, 49 (3), pp. 65-70.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Downhole gasification for improved oil recovery. Prog. Oilfield Chem., 6 (Managing Matured Fie), pp. 1-12.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2006. Experimental study of a novel in situ gasification technique for improved oil recovery from light oil reservoirs. Journal of Canadian Petroleum Technology, 45 (8), pp. 41-47.

Greaves, M., Xia, T. X., Werfilli, M. S. and Rathbone, R. R., 2002. THAI Process-Effect of Oil Layer Thickness On Heavy Oil Recovery, Proceedings of the Petroleum Society's International Petroleum Conference: Calgary, Canada. Journal of Canadian Petroleum Engineers, 2002-027, pp. 1-11.

Greaves, M., Ayasse, C. and Turta, A. T., 2008. Paper 2008-330: In Situ Upgrading Potential of the CAPRI™ Process. In: World Heavy Oil Congress, 2008-03-10 - 2008-03-12, Edmonton, Alberta.

Greaves, M., Bentaher, A. H. and Rathbone, R. R., 2005. Paper D16: Air Injection into Light Oil Reservoirs: Oxidation Kinetics and Simulation. In: 13th European Symposium on Improved Oil Recovery, 2005-04-25 - 2005-04-27, Budapest.

Greaves, M., Dong, L. L. and Rigby, S., 2012. Validation of toe-to-heel air-injection bitumen recovery using 3D combustion-cell results. SPE Reservoir Evaluation and Engineering, 15 (1), pp. 72-85.

Greaves, M., Dong, L. L. and Rigby, S. P., 2011. Upscaling THAI: Experiment to pilot. In: Canadian Unconventional Resources Conference 2011, CURC 2011, 2011-11-15 - 2011-11-17, Calgary Alberta.

Greaves, M., Dong, L. L. and Rigby, S. P., 2011. Validation of THAI bitumen recovery using 3D combustion cell results. In: 73rd European Association of Geoscientists and Engineers Conference and Exhibition 2011 - Incorporating SPE EUROPEC 2011, May 23, 2011 - May 26, 2011, 2011-05-23 - 2011-05-26, Vienna.

Greaves, M., Dong, L. and Rigby, S. P., 2011. Paper A11: Understanding the Mobile Oil Zone in Toe-to-Heel Air Injection (THAI) Process. In: 16th European Symposium on Improved Oil Recovery, 2011-04-12 - 2011-04-14, Cambridge.

Greaves, M., Dong, L. and Rigby, S. P., 2012. SPE 15817: Determination of Limits to Production in THAI. In: SPE Heavy Oil Conference, Calgary, 2012-06-12 - 2012-06-14, Alberta.

Greaves, M., El-Saghr, A. and Xia, T. X., 2000. CAPRI horizontal well reactor for catalytic upgrading of heavy oil. Preprints - American Chemical Society, Division of Petroleum Chemistry, 45 (4), pp. 595-598.

Greaves, M., Hwessa, M. M. and Ayasse, C., 2006. Paper 2006-407: THAI Process Development – Experiment to Pilot. In: World Heavy Oil Conference, 2006-12-05 - 2006-12-06, Beijing.

Greaves, M., Rathbone, R. R., El Ayadi, O. and El Abid, M., 2003. Paper IOR-BO23: Air Injection into Deep Light Oil Reservoirs: Combustion Tube Studies. In: 12th European Symposium on Improved Oil Recovery, 2003-09-08 - 2003-09-10, Kazan, Russia.

Greaves, M., Saghr, A., T. X. Xia, T., Turtar, A. and Ayasse, C.., 2001. THAI- new air injection technology for heavy oil recovery and in situ upgrading. Journal of Canadian Petroleum Technology, 40 (3).

Greaves, M., Turta, A. and Xia, T. X., 2009. Paper 2009-346: Shape of the Burned Zone and Volumetric Sweep in THAI™ Process. In: World Heavy Oil Congress, 2009-11-03 - 2009-11-05, Margarita Island, Venezuela.

Greaves, M. and Xia, T. X., 2008. Paper 2008-014: Producing Hydrogen and Incremental Oil from Light Oil Reservoirs Using Downhole Gasification. In: Canadian International Petroleum Conference, 2008-06-17 - 2008-06-19.

Greaves, M. and Xia, T. X., 2003. Paper IOR-B011: Short-Distance Pathway for Success for Heavy Oil Recovery and Upgrading. In: 12th European Symposium on Improved Oil Recovery, 2003-09-08 - 2003-09-10, Kazan, Russia.

Greaves, M. and Xia, T. X., 2005. SPE-97728: Underground Upgrading of Heavy Oil Using THAI – ‘Toe-to-Heel Air Injection’. In: SPE International Thermal Operations and Heavy Oil Symposium, 2005-11-01 - 2005-11-03, Calgary Alberta.

Greaves, M., Xia, T. X., Imbuss, S. and Nero, V., 2004. Paper 2004-067: THAI-CAPRI Process: Tracing Downhole Upgrading of Heavy Oil. In: 5th Canadian International Petroleum Conference, 2004-06-08 - 2004-06-10, Calgary, Alberta.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Paper 038-2005: Underground Gasification for Improved Oil Recovery. In: 6th Canadian International Petroleum Conference, 2005-06-07 - 2005-06-09, Calgary, Alberta.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Paper IOR-C32: Downhole Gasification for Improved Oil Recovery. In: 13th European Symposium on Improved Oil Recovery, 2005-04-25 - 2005-04-27, Budapest.

Greaves, M., Xia, T. X. and Turta, A. T., 2008. Stability of THAI™ process : Theoretical and experimental observations. Journal of Canadian Petroleum Technology, 47 (9), pp. 65-73.

Greaves, M. and Xia, T. X., 2004. Downhole upgrading of Wolf Lake oil using THAI/CAPRI processes - tracer tests. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 49 (1), pp. 69-72.

Greaves, M. and Xia, T. X., 2008. The reservoir as reactor. Tce, 801, pp. 35-37.

Gribbon, C., Channon, K. J., Zhang, W., Banwell, E. F., Bromley, E. H. C., Chaudhuri, J. B., Oreffo, R. O. C. and Woolfson, D. N., 2008. MagicWand: a single, designed peptide that assembles to stable, ordered α-helical fibers. Biochemistry, 47 (39), pp. 10365-10371.

Grogan, M.D.W., Leon-Saval, S.G., Williams, R., England, R. and Birks, T.A., 2009. Optical fibre with an aerogel-filled core. In: Conference on Lasers and Electro-Optics, CLEO 2009, 2009-05-31 - 2009-06-05, Baltimore.

Grogan, M. D. W., Leon-Saval, S. G., England, R. and Birks, T., 2010. Silica aerogel core waveguide. Optics Express, 18 (21), pp. 22497-22502.

Grogan, M. D. W., Rollings, M. D., Xiao, L., Wadsworth, W. J., England, R., Maier, S. A. and Birks, T. A., 2010. Plasmonic aerogel doped with gold nanoparticles. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Gu, T., Albert, F., Augustin, W., Chew, Y. M. J., Paterson, W. R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D. I., 2011. Fluid dynamic gauging applied to annular test apparatuses for fouling and cleaning. Heat Transfer Engineering, 32 (3-4), pp. 339-348.

Gu, T., Albert, F., Augustin, W., Chew, Y. M. J., Mayer, M., Paterson, W. R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D. I., 2011. Application of fluid dynamic gauging to annular test apparatuses for studying fouling and cleaning. Experimental Thermal and Fluid Science, 35 (3), pp. 509-520.

Gu, T., Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2009. Experimental and CFD studies of fluid dynamic gauging in annular flows. AIChE Journal, 55 (8), pp. 1937-1947.

Gu, T., Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2009. Experimental and CFD studies of fluid dynamic gauging in duct flows. Chemical Engineering Science, 64 (2), pp. 219-227.

Gyepi-Garbrah, I. A., Eisenthal, R., Plant, A. and Hubble, J., 2001. Development and evaluation of a tentacle affinity adsorbent. International Journal of Bio-Chromatography, 6 (3), pp. 195-206.

H

Hamid, M. H. S. A., Allen, C. L., Lamb, G. W., Maxwell, A. C., Maytum, H. C., Watson, A. J. A. and Williams, J. M. J., 2009. Ruthenium-catalyzed N-alkylation of amines and sulfonamides using borrowing hydrogen methodology. Journal of the American Chemical Society, 131 (5), pp. 1766-1774.

Hancock, S. L., 2013. Preparation of Initiators for Sustainable Polymerisation. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Hargreaves, J. S. J. and Lapkin, A. A., 2003. Preface. Catalysis Today, 81 (4), p. 529.

Hargreaves, J. S. J., Lapkin, A. A. and Editors, [N. V.], 2003. Catalyst Life Cycle-Preparation, Activation, Deactivation and Regeneration Meeting. Vol. 81(4). Bath, England: Unkown Publisher. (Catalysis Today)

Harkins, M., Lou-Hing, D., Sargeant, L. A. and Chuck, C. J., 2013. Effect of bacterial invasion on the growth and lipid production of the oleaginous yeast Rhodotorula glutinis. Journal of Technology Innovations in Renewable Energy, 2 (3), pp. 222-230.

Harris, J., 2014. The Interpretation of Fouling Data from a Stirred Batch Cell. Thesis (Master of Philosophy (MPhil)). University of Bath. Item availability may be restricted.

Harrowing, S. R. and Chaudhuri, J. B., 2003. Effect of column dimensions and flow rates on size-exclusion refolding of beta -lactamase. Journal of Biochemical and Biophysical Methods, 56 (1-3), pp. 177-188.

Hart, A., Greaves, M. and Wood, J., 2015. Forthcoming. A comparative study of fixed-bed and dispersed catalytic upgrading of heavy crude oil using-CAPRI. Chemical Engineering Journal

Hart, A., Leeke, G., Greaves, M. and Wood, J., 2014. Downhole heavy crude oil upgrading using CAPRI:effect of steam upon upgrading and coke formation. Energy & Fuels, 28 (3), pp. 1811-1819.

Hart, J. N., Parker, S. C. and Lapkin, A. A., 2009. Energy Minimization of Single-Walled Titanium Oxide Nanotubles. ACS Nano, 3 (11), pp. 3401-3412.

Harvey, H. A., Ketterer, M. R., Preston, A., Lubaroff, D., Williams, R. and Apicella, M. A., 1997. Ultrastructural analysis of primary human urethral epithelial cell cultures infected with Neisseria gonorrhoeae. Infection and Immunity, 65 (6), pp. 2420-2427.

Hassan, F., Wang, J. W., Chigada, P. I., Al-Duri, B., Rigby, S. P. and Wood, J., 2011. Deactivation during 1-Hexene Isomerization over Zeolite Y and ZSM5 Catalysts under Supercritical Conditions. Industrial & Engineering Chemistry Research, 50 (12), pp. 7161-7171.

Hayes, R. E., Kolaczkowski, S. T., Li, P. K. C. and Awdry, S., 2001. The palladium catalyzed oxidation of methane: reaction kinetics and the effect of diffusion barriers. Chemical Engineering Science, 56 (16), pp. 4815-4835.

Hayes, R. E., Bertrand, F. H., Audet, C. and Kolaczkowski, S. T., 2003. Catalytic combustion kinetics: using a direct search algorithm to evaluate kinetic parameters from light-off curves. Canadian Journal of Chemical Engineering, 81 (6), pp. 1192-1199.

Head, L. E. and Bird, M. R., 2013. Backwashing of tubular ceramic microfilters fouled with milk protein isolate feeds. Journal of Food Process Engineering, 36 (2), pp. 228-240.

Hicks, D. I., Crittenden, B. D. and Warhurst, A. C., 2000. Design for decommissioning: Addressing the future closure of chemical sites in the design of new plant. Process Safety and Environmental Protection, 78 (6), pp. 465-467.

Hill, A., 2013. Design of low temperature catalysts for hydrogen release from ammonia. In: DTC Summer Showcase 2013, 2013-09-16 - 2013-09-18, Bath.

Hitchcock, I., Chudek, J. A., Holt, E. M., Lowe, J. P. and Rigby, S. P., 2010. NMR Studies of Cooperative Effects in Adsorption. Langmuir, 26 (23), pp. 18061-18070.

Hitchcock, I., Rigby, S., Chudek, J., Holt, L. and Lowe, J., 2011. MRI and PGSE NMR Studies of Long-range, Pore-pore Interaction Effects in Gas Adsorption. In: Fantazzini, P., Bortolotti, V., Karger, J. and Galvosas, P., eds. Magnetic Resonance in Porous Media. Vol. 1330. , pp. 53-56. (AIP Conference Proceedings)

Hofman, J. A. M. H., Beerendonk, E. F., Folmer, H. C. and Kruithof, J. C., 1997. Removal of pesticides and other micropollutants with cellulose-acetate, polyamide and ultra-low pressure reverse osmosis membranes. Desalination, 113 (2-3), pp. 209-214.

Hofman, J. A. M. H., Ijpelaar, G. F., Heijman, S. G. J., Vrouwenvelder, J. S., Kruithof, J. C. and Van Der Meer, W. G. J., 2004. Drinking water treatment in The Netherlands:Outstanding and still ambitious. Water Science and Technology : Water Supply, 4 (5-6), pp. 253-262.

Hofman, J. A. M. H., Kappelhof, J. W. N. M., Kruithof, J. C., van der Hoek, J. P. and Schippers, J. C., 1994. Potential applications of membrane processes in Dutch drinking water practice. Water Supply, 12 (1-2).

Hofman, J. A. M. H., Noij Th., H. M., Kruithof, J. C. and Schippers, J. C., 1993. Removal of pesticides and other micropollutants with membrane filtration. Water Supply, 11 (3-4), pp. 259-269.

Hofman, J. A. M. H., Noij Th., H. M. and Schippers, J. C., 1993. Removal of pesticides and other organic micropollutants with membrane filtration. Water Supply, 11 (1), pp. 129-139.

Hofman, J. A. M. H. and Stein, H. N., 1991. Destabilization of emulsions through deformation of the droplets. Journal of Colloid and Interface Science, 147 (2), pp. 508-516.

Hofman, J. A. M. H. and Stein, H. N., 1992. Hydrodynamic and surface interaction forces on a particle in a pore. Journal of Colloid and Interface Science, 154 (2), pp. 359-368.

Hofman, J. A. M. H. and Stein, H. N., 1991. Permeability reduction of porous media on transport of emulsions through them. Colloids and Surfaces, 61 (C), pp. 317-329.

Hofman, J. A. M. H., Beumer, M. M., Baars, E. T., Van Der Hoek, J. P. and Koppers, H. M. M., 1998. Enhanced surface water treatment by ultrafiltration. Desalination, 119 (1-3), pp. 113-125.

Hofman, J. A. M. H., Beumer, M. M., Baars, E. T., van der Hoek, J. P. and Koppers, H. M. M., 1999. Enhanced surface water treatment by ultrafiltration. Water Supply, 17 (1), pp. 371-383.

Hofman-Caris, C. H. M., Harmsen, D. J. H., Wols, B. A., Janssen, L. J. J. M., Beerendonk, E. F., Knol, A. H. and Hofman, J. A. M. H., 2011. Prediction of advanced oxidation performance in UV/H2O 2 reactor systems with LP-UV lamps. Water Science and Technology : Water Supply, 11 (4), pp. 460-467.

Holt, E. and Bird, M. R., 2014. Fouling and cleaning of ceramic membranes during the dewatering of gum arabic waste streams. In: Fouling and cleaning in food processing: Green Cleaning 2014. University of Cambridge: .

Holyfield, L., Bimbo, N., Ting, V., Burrows, A. and Mays, T., 2014. Evaluation of an Activated Carbon as an Adsorbent in Hybrid High Pressure Hydrogen Storage Tanks. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2014-12-15 - 2014-12-17, Birmingham.

Hooper, L. E., Mosley, P. J., Muir, A. C., Wadsworth, W. J. and Knight, J. C., 2010. All-normal dispersion photonic crystal fiber for coherent supercontinuum generation. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. Washington DC: OSA.

Hooper, L. E., Mosley, P. J., Muir, A. C., Yu, F., Mangan, B. J., Wadsworth, W. J., Knight, J. C. and Dudley, J. M., 2011. Coherent widely tunable source of sub-picosecond pulses using all-normal dispersion fiber supercontinuum. In: 2011 7th International Workshop on Fibre and Optical Passive Components, WFOPC2011. Piscataway, NJ: IEEE.

Howell, J. A., 2004. Future of membranes and membrane reactors in green technologies and for water reuse. Desalination, 162 (1-3), pp. 1-11.

Howell, J. A., Arnot, T. C. and Chua, H. C., 2003. Turnup turndown of membrane operation of membrane bioreactors. Annals of the New York Academy of Sciences, 984 (Advanced Membrane Te), pp. 492-501.

Howell, J. A., Arnot, T. C., Chua, H. C., Godino, P., Hatziantoniou, D. and Metsamuuronen, S., 2002. Controlled flux behavior of membrane processes. Macromolecular Symposia, 188 (Polymer Membranes), pp. 23-35.

Howell, J. A., Arnot, T. C. and Liu, W., 2003. Membrane bioreactors for treating waste streams. Annals of the New York Academy of Sciences, 984 (Advanced Membrane Te), pp. 411-419.

Howell, J. A., 2002. Future research and developments in the membrane field. Desalination, 144 (1-3), pp. 127-131.

Howell, J. A., Chua, H. C., Arnot, T. and Sim, M. C., 2001. Near Critical Flux Operation of Membrane Bioreactors under Dynamic Load. In: United Engineering Foundation Conference on Advanced Membrane Technology, 2001-10-14 - 2001-10-19, Braga.

Hruzewicz-Kolodziejczyk, A., 2013. Towards a Standard Methodology for Determining Hydrogen Storage in Nanoporous Materials. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Hu, Z., Pantoș, G. D., Kuganathan, N., Arrowsmith, R., Jacobs, R. M. J., Kociok-Köhn, G., O'Byrne, J., Jurkschat, K., Burgos, P., Tyrrell, R. M., Botchway, S. W., Sanders, J. K. M. and Pascu, S. I., 2012. Interactions between amino acid-tagged naphthalenediimide and single walled carbon nanotubes for the design and construction of new bioimaging probes. Advanced Functional Materials, 22 (3), pp. 503-518.

Huang, J.-Y., Chew, Y.M.J. and Wilson, D.I., 2013. Investigating the effect of starting mode on food fat gel layer formation on cold surfaces. Journal of Food Engineering, 119 (3), pp. 454-463.

Huang, J. Y., Chew, Y. M. J. and Wilson, I. D., 2012. A spinning disc study of fouling of cold heat transfer surfaces by gel formation from model food fat solutions. Journal of Food Engineering, 109 (1), pp. 49-61.

Huang, P., Chang, W.-S., Ansell, M., Chew, J., Shea, A., Zeidler, A. and Pickering, S., 2014. Heat transfer simulation and experimental studies of bamboo in radial direction. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14, Quebec City.

Hubble, J., 2007. Affinity adsorption of cells to surfaces and strategies for cell detachment. Advances in Biochemical Engineering/Biotechnology, 106 (Cell Separation), pp. 75-99.

Hubble, J., 2001. Competition and intrinsic displacement effects in overloaded weak affinity chromatography. Separation Science and Technology, 36 (4), pp. 541-554.

Hubble, J., 2003. Monte Carlo simulation of biospecific interactions between cells and surfaces. Chemical Engineering Science, 58 (19), pp. 4465-4474.

Hubble, J., 2001. Stochastic modeling of affinity adsorption. Biotechnology Progress, 17 (3), pp. 565-567.

Hubble, J., Chaudhuri, J., Eisenthal, R., Zhang, R., Bowyer, A., Jarman-Smith, M. L. and Tang, M., 2005. Process. A61K8/04-WO2005116084 (A1), 08 December 2005.

I

Ilinich, O. M. and Lapkin, A. A., 2002. Sorbate-induced structural rearrangements and permeation of gases in the polyphenylene oxide copolymer. Polymer, 43 (11), pp. 3209-3215.

Iwan, A., Stephenson, H., Ketchie, W. C. and Lapkin, A., 2009. High temperature sequestration of CO2 using lithium zirconates. Chemical Engineering Journal, 146 (2), pp. 249-258.

J

Jackson, T. R., Springall, J. S., Rogalle, D., Masurnoto, N., Li, H. C., D'Hooge, F., Perera, S. P., Jenkins, A. T. A., James, T. D., Fossey, J. S. and van den Elsen, J. M. H., 2008. Boronate affinity saccharide electrophoresis:A novel carbohydrate analysis tool. Electrophoresis, 29 (20), pp. 4185-4191.

Jarman-Smith, M., Bodamyali, T., Stevens, C., Howell, J. A., Horrocks, M. and Chaudhuri, J. B., 2004. Human fibroblast culture on a crosslinked dermal porcine collagen matrix. Biochemical Engineering Journal, 20 (2-3), pp. 217-222.

Jarman-Smith, M. L., Bodamyali, T., Stevens, C., Howell, J. A., Horrocks, M. and Chaudhuri, J. B., 2004. Porcine collagen crosslinking, degradation and its capability for fibroblast adhesion and proliferation. Journal of Materials Science: Materials in Medicine, 15 (8), pp. 925-932.

Jeffs, C.A., Smith, M.W., Stone, C.A., Bezzu, C.G., Msayib, K.J., McKeown, N.B. and Perera, S. P., 2013. A polymer of intrinsic microporosity as the active binder to enhance adsorption/separation properties of composite hollow fibres. Microporous and Mesoporous Materials, 170, pp. 105-112.

Jeffs, C., Smith, M. W., Stone, C. A., Crittenden, B. and Perera, S., 2013. Low pressure drop respirator gas filters using adsorbent hollow fibres as an alternative to granular adsorbents. Journal of the International Society for Respiratory Protection, 30, pp. 12-29.

Jenkins, R., 2014. Renewable liquid transport fuels from microbes and waste resources. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Jodłowski, P.J., Goła̧b, R., Kryca, J., Kołodziej, A., Iwaniszyn, M., Kolaczkowski, S.T. and Łojewska, J., 2013. A comparison between monolithic and wire gauze structured catalytic reactors for CH4 and CO removal from biogas-fuelled engine exhaust. Topics in Catalysis, 56 (1-8), pp. 390-396.

Johns, M., 2014. Predicting the Solubility of Cellulose in Organic Electrolyte Solutions. In: DTC Summer Showcase 2014, 2014-07-07 - 2014-07-09, Bath.

Jones, M. I., Wang, L. Y., Abeynaike, A. and Patterson, D. A., 2011. Utilisation of waste material for environmental applications: calcination of mussel shells for waste water treatment. Advances in Applied Ceramics, 110 (5), pp. 280-286.

Jones, M. I., Barakat, H. and Patterson, D. A., 2011. Production of hydroxyapatite from waste mussel shells. IOP Conference Series: Materials Science and Engineering, 18 (19), 192002.

Jraou, M., Feki, F., Arnot, T., Skouteris, G. and Sayadi, S., 2013. Application of membrane bioreactor technology for urban wastewater treatment in Tunisia : Focus on treated water quality. Sustainable Sanitation Practice, 14, pp. 49-54.

K

Kagansky, A., Freeman, L., Lukyanov, D. and Strunnikov, A., 2004. Histone Tail-independent Chromatin Binding Activity of Recombinant Cohesin Holocomplex. Journal of Biological Chemistry, 279 (5), pp. 3382-3388.

Kolaczkowski, S. T., 2003. Catalytic combustion: making the connection between the physical/chemical processes and the mathematical model of the reactor. In: Movchan, A. B., ed. IUTAM Symposium on Asymptotics, Singularities and Homogenisation in Problems of Mechanics. (Solid Mechanics and its Applications ). Vol. 113. , pp. 557-568.

Kolaczkowski, S. T., Chao, R., Awdry, S. and Smith, A., 2007. Application of a CFD code (FLUENT) to formulate models of catalytic gas phase reactions in porous catalyst pellets. Chemical Engineering Research & Design, 85 (A11), pp. 1539-1552.

Kolaczkowski, S. T. and Kim, S., 2006. Novel alumina 'KK Leaf Structures' as catalyst supports. Catalysis Today, 117 (4), pp. 554-558.

Kolaczkowski, S. T., Plucinski, P. and Lapkin, A. A., 2007. Selective oxidation of benzyl alcohol in a pilot scale multichannel reactor. In: 1st International Congress on Green Process Engineering, 2007-04-24 - 2007-04-26, Toulouse.

Kolaczkowski, S. T., Flatley, C., Hawley, G. and Awdry, S., 2001. Catalytic combustion of diesel to power a gas turbine on a hybrid vehicle - a cleaner method of transport. In: 6th World Congress of Chemical Engineering, 2001-09-23, Melbourne.

Kolaczkowski, S., 2010. Apparatus and Process For Use In Three-Phase Catalytic Reactions. C07C45/29-US2010010269 (A1), 14 January 2010.

Kolaczkowski, S., Le, C. D. and Awdry, S., 2011. Equilibrium reaction(s) involving H2S and COS species: consideration of thermodynamics and implications on the biomass gasification process. In: Bridgwater, A. V., ed. Proceedings of the bioten conference on biomass, bioenergy and biofuels 2010. Newbury: CPL Press, pp. 733-744.

Kolaczkowski, S., Le, C. D. and Jodlowski, P., 2011. Gasification of wood pellets in an experimental quartz tube gasifier: How visual 1D experiments can aid 3D design considerations. In: Bridgwater, A. V., ed. Proceedings of the bioten conference on biomass, bioenergy and biofuels 2010. Newbury: CPL Press, pp. 720-732.

Kolaczkowski, S., Robinson, K., Awdry, S. and Ye, S., 2008. Transient heat transfer studies on a catalytic convertor under non-reacting conditions. In: 5th International Conference on Environmental Catalysis, 2008-08-31 - 2008-09-03, Queen's University, Belfast.

Koltuniewicz, A. B., Field, R. W. and Arnot, T., 1995. Cross-flow and dead-end microfiltration of oily-water emulsion. Part I: Experimental study and analysis of flux decline. Journal of Membrane Science, 102, pp. 193-201.

Korneva, G., Mattia, D., Gogotsi, Y. and Bradley, J. C., 2006. Filling carbon nanopipes with functionalized nanoparticles. Abstracts of Papers, 231st ACS National Meeting, Atlanta, GA, United States, March 26-30, 2006

Korneva, G., Mattia, D., Gogotsi, Y., Halverson, D., Friedman, G., Yee, H. and Bradley, J.-C., 2006. Filling carbon nanopipes with functional nanoparticles. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 51 (1), pp. 36-37.

Koumpouras, G. C., Alpay, E., Lapkin, A., Ding, Y. and Stepanek, F., 2007. The effect of adsorbent characteristics on the performance of a continuous sorption-enhanced steam methane reforming process. Chemical Engineering Science, 62 (18-20), pp. 5632-5637.

Kramer, M., Chaudhuri, J. B., De Bank, P. A. and Ellis, M. J., 2011. Aligned neurite outgrowth on electrospun PLGA nanofibres. European Cells and Materials, 22 (Supplement 2), p. 59.

Kruithof, J. C., Hopman, R., Meijers, R. T. and Hofman, J. A. M. H., 1994. Presence and removal of pesticides in Dutch drinking water practice. Water Supply, 12 (1-2).

L

Lam, A., Cao, X., Eisenthal, R. and Hubble, J., 2001. Effect of contact time and inhibitor concentration on the affinity mediated adsorption of cells to surfaces. Enzyme Microbial Technology, 29 (1), pp. 28-33.

Lamb, G. W. and Williams, J. M. J., 2008. Borrowing hydrogen - C - N bond formation from alcohols. Chimica Oggi-Chemistry Today, 26 May-Jun (3), pp. 17-19.

Lamb, G. W., Watson, A. J. A., Jolley, K. E., Maxwell, A. C. and Williams, J. M., 2009. Borrowing hydrogen methodology for the conversion of alcohols into N-protected primary amines and in situ deprotection. Tetrahedron Letters, 50 (26), pp. 3374-3377.

Lapkin, A., Bozkaya, B., Mays, T., Borello, L., Edler, K. and Crittenden, B. D., 2003. Preparation and characterization of heteropolyacids supported on synthetic mesoporous carbons and silica. Catalysis Today, 81, pp. 611-621.

Lapkin, A., Joyce, L. and Crittenden, B. D., 2004. A framework for evaluating the “greenness” of chemical processes, a case study of a novel VOC recovery technology,. Environmental Science and Technology, 38, pp. 5815-5823.

Lapkin, A. A., 2006. Sustainability performance indicators. In: Dewulf, J. and van Langenhove, I. H., eds. Renewables-Based Technology: Sustainability Assessment. John Wiley & Sons, pp. 39-53.

Lapkin, A. A., Adou, E., Mlambo, B. N., Chemat, S., Suberu, J., Collis, A. E. C., Clark, A. and Barker, G., 2014. Integrating medicinal plants extraction into a high-value biorefinery : an example of Artemisia annua L. Comptes Rendus Chimie, 17 (3), pp. 232-241.

Lapkin, A. A., Tennison, S. R. and Thomas, W. J., 2002. A porous carbon membrane reactor for the homogeneous catalytic hydration of propene. Chemical Engineering Science, 57 (13), pp. 2357-2369.

Lapkin, A., Boddu, V. M., Aliev, G. N., Goller, B., Polisski, S. and Kovalev, D., 2008. Photo-oxidation by singlet oxygen generated on nanoporous silicon in a LED-powered reactor. Chemical Engineering Journal, 136 (2-3), pp. 331-336.

Lapkin, A., Chen, H. and Ding, Y., 2009. Rheological behaviour of nanofluids containing tube / rod-like nanoparticles. Powder Technology, 194 (1-2), pp. 132-141.

Lapkin, A., Savill-Jowitt, C., Edler, K. and Brown, R., 2006. Microcalorimetric Study of Ammonia Chemisorption on H3PW12O40 Supported onto Mesoporous Synthetic Carbons and SBA-15. Langmuir, 22 (18), pp. 7664-7671.

Lapkin, A. A., Bozkaya, B. and Plucinski, P. K., 2006. Selective oxidation of 1-butene by molecular oxygen in a porous membrane Taylor flow reactor. Industrial & Engineering Chemistry Research, 45 (7), pp. 2220-2228.

Lapkin, A. A., Plucinski, P. K. and Cutler, M., 2006. Comparative Assessment of Technologies for Extraction of Artemisinin. Journal of Natural Products, 69 (11), pp. 1653-1664.

Lapkin, A. A., Walker, A., Sullivan, N., Khambay, B., Mlambo, B. and Chemat, S., 2009. Development of HPLC analytical protocols for quantification of artemisinin in biomass and extracts. Journal of Pharmaceutical and Biomedical Analysis, 49 (4), pp. 908-915.

Lau, A., Crittenden, B. D. and Field, R. W., 2004. Enhancement of liquid phase column performance by means of oscillatory flow: an experimental study. Separation and Purification Technology, 35, pp. 113-124.

Lawrence, R. M. H., Mays, T., Rigby, S., Walker, P. and D'Ayala, D., 2007. Effects of carbonation on the pore structure of non-hydraulic lime mortars. Cement and Concrete Research, 37 (7), pp. 1059-1069.

Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. The use of TG to measure different concentrations of lime in non-hydraulic lime mortars. Journal of Thermal Analysis and Calorimetry, 85 (2), pp. 377-382.

Le, C. D., 2012. Gasification of Biomass : An Investigation of Key Challenges to Advance Acceptance of the Technology. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Lee, K. P., 2013. Fabrication and Applications of Nanoporous Alumina Membranes. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Lee, L. Y., Perera, S. P., Crittenden, B. D. and Kolaczkowski, S. T., 2000. Manufacture and characterisation of silicalite monoliths. Adsorption Science & Technology, 18 (2), pp. 147-170.

Lee, Y. S., Lowe, J. P., Gilby, E., Perera, S. P. and Rigby, S. P., 2010. The initial release of cisplatin from poly(lactide-co-glycolide) microspheres. International Journal of Pharmaceutics, 383 (1-2), pp. 244-254.

Leese, H., Bhurtun, V., Lee, K.P. and Mattia, D., 2013. Wetting behaviour of hydrophilic and hydrophobic nanostructured porous anodic alumina. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 420, pp. 53-58.

Leese, H. and Mattia, D., 2013. Wetting in carbon inorganic and organic nanotubes and nanochannels. In: Ondarcuhu, T. and Aime, J.-P., eds. Nanoscale Liquid Interfaces: Wetting, Patterning and Force Microscopy at the Molecular Scale. Pan Stanford Publishing, pp. 361-402.

Leese, H. and Mattia, D., 2014. Electroosmotic flow in nanoporous membranes in the region of electric double layer overlap. Microfluidics and Nanofluidics, 16 (4), pp. 711-719.

Legum, B., Cooper, R., Mattia, D., Gogotsi, Y. and Layton Bradley, E., 2007. The effect of deformation on room temperature Coulomb blockade using conductive carbon nanotubes. Engineering in Medicine and Biology Society (29th Annual International Conference of the IEEE), 2007, pp. 4206-10.

Lewandowski, M., Babu, G. S., Vezzoli, M., Jones, M. D., Owen, R. E., Mattia, D., Plucinski, P., Mikolajska, E., Ochenduszko, A. and Apperley, D. C., 2014. Investigations into the conversion of ethanol to 1,3-butadiene using MgO:SiO2 supported catalysts. Catalysis Communications, 49, pp. 25-28.

Lewis, W.J.T., Peck, O.P.W., Muir, A.C., John Chew, Y.M. and Bird, M.R., 2012. The fouling and cleaning of surfaces in the food sector. Food Science and Technology - London, 26 (4), pp. 30-32.

Lewis, W., Chew, J. and Bird, M., 2011. Experimental and CFD Studies of Fluid Dynamic Gauging in Cross-Flow Microfiltration Systems. In: 11th International Congress on Engineering and Food (ICEF11). .

Li, C., Zhang, R., Wang, L., Bowyer, A., Eisenthal, R., Shen, Y. and Hubble, J., 2013. Purification of lysozyme by intrinsically shielded hydrogel beads. Modern Physics Letters B, 27 (19), 1341028.

Li, Y. Y., Perera, S. P., Crittenden, B. D. and Bridgwater, J., 2001. The effect of the binder on the manufacture of a 5A zeolite monolith. Powder Technology, 116 (1), pp. 85-96.

Li, Y. Y., Perera, S. and Crittenden, B. D., 1998. Zeolite monoliths for air separation: part 1: manufacture and characterisation. Chemical Engineering Research & Design, 76 (8), pp. 921-930.

Licastro, F., Pedrini, S., Davis, L. J., Caputo, L., Tagliabue, J., Savorani, G., Cucinotta, D. and Annoni, G., 2001. Alpha-1-antichymotrypsin and oxidative stress in the peripheral blood from patients with probable Alzheimer disease: a short-term longitudinal study. Alzheimer Disease & Associated Disorders, 15 (1), pp. 51-5.

Lin, X., Telepeni, I., Blake, A. J., Dailly, A., Brown, C. M., Simmons, J. M., Zoppi, M., Walker, G. S., Thomas, K. M., Mays, T. J., Hubberstey, P., Champness, N. R. and Schroder, M., 2009. High capacity hydrogen adsorption in Cu(II) tetracarboxylate framework materials: the role of pore size, ligand functionalization, and exposed metal sites. Journal of the American Chemical Society, 131 (6), pp. 2159-2171.

Lindsey, B. and Mays, T., 2005. Thermogravimetric analysis of the Co-carbonisation of biomass-lignite blends. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Linkhorst, J. and Lewis, W. J. T., 2013. Workshop on membrane fouling and monitoring : a summary. Desalination and Water Treatment, 51 (31-33), pp. 6401-6406.

Lister, V. Y., Lucas, C., Gordon, P. W., Chew, Y. M. J. and Wilson, D. I., 2011. Pressure mode fluid dynamic gauging for studying cake build-up in cross-flow microfiltration. Journal of Membrane Science, 366 (1-2), pp. 304-313.

Liu, Y., Withers, R., Ting, V. P., Fitzgerald, J. and Noren, L., 2006. Stacking fault disorder and its diffraction consequences in Ba3MNb2O9 (M=Co and Mn) 1:2 triple perovskites. Physica B: Condensed Matter, 385-386 (1), pp. 564-566.

Liu, Y., Withers, R. L., Whichello, A. P., Norén, L., Ting, V., Brink, F. and Fitz Gerald, J. D., 2005. A combined diffraction and dielectric properties investigation of Ba3MnNb2O9 complex perovskites. Journal of Solid State Chemistry, 178 (11), pp. 3389-3395.

Lopez Munoz, M. J., Aguado, J., Cerro, L., Torrente-Murciano, L. and Lapkin, A. A., 2008. Synthesis and characterization of crystalline TiO2 through acid pre-treatment of titanate nanotubes. In: Simposio Iberoamericano de Catálisis (XXI SICAT), 2008-01-01, Málaga-Benalmádena-Costa. Spain.

Loponov, K., Goller, B., Moskalenko, A., Kovalev, D. and Lapkin, A., 2010. Efficiency of porous silicon photosensitizer in the singlet oxygen-mediated oxidation of organic compounds. Journal of Photochemistry and Photobiology A Chemistry, 211 (1), pp. 74-77.

Lukyanov, D. B. and Vazhnova, T., 2001. Dehydroisomerisation of n-butane into isobutene over Ga-containing zeolite catalysts. Special Publication - Royal Society of Chemistry, 266 (Supported Catalysts ), pp. 188-195.

Lukyanov, D. B. and Vazhnova, T., 2011. Transformation of methane over platinum supported catalysts at moderate temperature. Journal of Molecular Catalysis A: Chemical, 342-343, pp. 1-5.

López, J. M., Gilbank, A. L., García, T., Solsona, B., Agouram, S. and Torrente-Murciano, L., 2015. Forthcoming. The prevalence of surface oxygen vacancies over the mobility of bulk oxygen in nanostructured ceria for the total toluene oxidation. Applied Catalysis B: Environmental, 174-175, pp. 403-412.

M

M. Kabir, M., Forgacs, G. and Sárvári Horváth, I., 2013. Enhanced methane production from wool textile residues by thermal and enzymatic pretreatment. Process Biochemistry, 48 (4), pp. 575-580.

M. Kabir, M., Forgacs, G. and Sárvári Horváth, I., 2015. Biogas from Lignocellulosic Materials. In: Lignocellulose-Based Bioproducts. Springer, p. 207. (Biofuel and Biorefinery Technologies)

Ma, X., Balaban, M.O., Zhang, L., Patterson, E. E. and James, B., 2014. Quantification of pizza baking properties of different cheeses, and their correlation with cheese functionality. Journal of Food Science, 79 (8), E1528-E1534.

Ma, X., James, B., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2012. The stretchability of Mozzarella cheese evaluated by a temperature-controlled 3-prong hook test. Journal of Dairy Science, 95 (10), pp. 5561-5568.

Ma, X., James, B., Balaban, M. O., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2013. Quantifying blistering and browning properties of Mozzarella cheese. Part I:Cheese made with different starter cultures. Food Research International, 54 (1), pp. 912-916.

Ma, X., James, B., Balaban, M. O., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2013. Quantifying blistering and browning properties of Mozzarella cheese. Part II:Cheese with different salt and moisture contents. Food Research International, 54 (1), pp. 917-921.

Macchietto, S., Hewitt, G. F., Coletti, F., Crittenden, B. D., Dugwell, D. R., Galindo, A., Jackson, G., Kandiyoti, R., Kazarian, S. G., Luckham, P. F., Matar, O. K., Millan-Agorio, M., Muller, E. A., Paterson, W., Pugh, S. J., Richardson, S. M. and Wilson, D. I., 2011. Fouling in crude oil preheat trains: a systematic solution to an old problem. Heat Transfer Engineering, 32 (3-4), pp. 197-215.

Mangan, B. J., Muir, A. C. and Knight, J. C., 2010. Photonic bandgap fiber with multiple hollow cores. Journal of Lightwave Technology, 28 (9), pp. 1287-1290.

Manning, H., 2014. The development of enhanced emulsifying agents by membrane fractionation of gum arabic. In: The 10th International Congress on Membranes and Membrane Processes, 2014-07-20 - 2014-07-25, Suzhou.

Manning, H. and Bird, M. R., 2014. The effect of fouling upon the performance of synthetic membranes used to fractionate gum arabic. In: Fouling and Cleaning in Food Processing 2014: 'Green Cleaning', 2014-03-31 - 2014-04-02, Cambridge.

Manning, H. and Bird, M., 2013. The application of hybrid membrane processes to fractionate gum arabic into streams of added value. In: 17th Gums & Stabilisers for the Food Industry Conference, 2013-06-25 - 2013-06-28, Wrexham.

Marino, H., 2010. Phase inversion temperature emulsification: from batch to continuous process. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Mattia, D., Korneva, G., Sabur, A., Friedman, G. and Gogotsi, Y., 2007. Multifunctional Nanotubes with Nanoparticles Embedded in their Walls. Nanotechnology, 18, p. 155305.

Mattia, D., Rossi, M. P., Kim, B. M., Korneva, G., Bau, H. H. and Gogotsi, Y., 2006. Effect of Graphitization on the Wettability and Electrical Conductivity of CVD-Carbon Nanotubes and Films. Journal of Physical Chemistry B, 110 (20), pp. 9850-9855.

Mattia, D., Rossi, M. P., Ye, H. and Gogotsi, Y., 2007. In situ Fluid Studies in Carbon Nanotubes with Diameters Ranging from 1 to 500 nm. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics – 2007, 2007-01-01, Athens.

Mattia, D. and Leese, H., 2014. Controlled hydrothermal pore reduction in anodic alumina membranes. Nanoscale, 6 (22), pp. 13952-13957. Item availability may be restricted.

Mattia, D., 2010. Wetting phenomena inside carbon nanotubes. In: Starov, V. M., ed. Nanoscience: Colloidal and Interfacial Aspects. CRC Press. (Surfactant Science)

Mattia, D. and Calabrò, F., 2012. Explaining high flow rate of water in carbon nanotubes via solid-liquid molecular interactions. Microfluidics and Nanofluidics, 13 (1), pp. 125-130.

Mattia, D., Desmaison-Brut, M., Dimovski, S., Gogotsi, Y. and Desmaison, J., 2005. Oxidation behaviour of an aluminium nitride-hafnium diboride ceramic composite. Journal of the European Ceramic Society, 25 (10), pp. 1789-1796.

Mattia, D., Desmaison-Brut, M., Tetard, D. and Desmaison, J., 2005. Wetting of HIP AlN-TiB2 ceramic composites by liquid metals and alloys. Journal of the European Ceramic Society, 25 (10), pp. 1797-1803.

Mattia, D. and Gogotsi, Y., 2008. Review: Static and dynamic behavior of liquids inside carbon nanotubes. Microfluidics and Nanofluidics, 5 (3), pp. 289-305.

Mattia, D. and Gogotsi, Y., 2006. Surface functionalization to control the wetting behavior of nanostructured carbons. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 51 (1), pp. 3-4.

Mattia, D., Korneva, G., Friedman, G. and Gogotsi, Y., 2007. Multifunctional Nanotubes with Particles Embedded in their Walls. Abstracts, 39th Middle Atlantic Regional Meeting of the American Chemical Society, Collegeville, PA, United States, May 16-18

Mattia, D., Lee, K. P. and Calabrò, F., 2014. Water permeation in carbon nanotube membranes. Current Opinion in Chemical Engineering, 4, pp. 32-37.

Mattia, D., Leese, H. and Lee, K. P., 2015. Carbon nanotube membranes : From flow enhancement to permeability. Journal of Membrane Science, 475 (1), pp. 266-272.

Mattia, D., Starov, V. and Semenov, S., 2012. Thickness, stability and contact angle of liquid films on and inside nanofibres, nanotubes and nanochannels. Journal of Colloid and Interface Science, 384 (1), pp. 149-156.

Mattsson, T., Lewis, W., Chew, J. and Bird, M., 2015. In situ investigation of soft cake fouling layers using fluid dynamic gauging. Food and Bioproducts Processing, 93, pp. 205-210.

Mays, T. J., 2007. A new classification of pore sizes. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 57-62.

Mays, T., 2012. UK Hydrogen Energy Programme. University of Bath.

McClymont, D. W. J., 2014. Novel Catalyst Systems For DeNOx. Thesis (Doctor of Philosophy (PhD)). University of Bath.

McConell, K., Jarman-Smith, M., Stewart, K. and Chaudhuri, J. B., 2004. Culture and meniscal chondrocytes on alginate hydrogel matrices. Food and Bioproducts Processing, 82 (C2), pp. 126-132.

McEnaney, B., Alain, E., Yin, Y. F. and Mays, T. J., 2001. Porous carbons for gas storage and separation: characterisation and performance. In: Rand, B., Appleyard, S. P. and Yardim, M. F., eds. Design and Control of Structure of Advanced Carbon Materials for Enhanced Performance. Vol. 374. Springer, pp. 295-318. (NATO Science Series E: Applied Sciences)

McFetridge, P. S., Abe, K., Horrocks, M. and Chaudhuri, J. B., 2007. Vascular tissue engineering: Bioreactor design considerations for extended culture of primary human vascular smooth muscle cells. Asaio Journal, 53 Sep-Oct (5), pp. 623-630.

McFetridge, P. S., Chaudhuri, J. B., Howell, J. A., Bodamyali, T., Stevens, C. R. and Horrocks, M., 2001. Use of porcine collagen as a scaffold for a tissue engineered small diameter vascular graft. Abstracts of Papers of the American Chemical Society, 221, U146-U146.

McFetridge, P. S., Daniel, J. W., Bodamyali, T., Horrocks, M. and Chaudhuri, J. B., 2004. Preparation of porcine carotid arteries for vascular tissue engineering applications. Journal of Biomedical Materials Research, Part A, 70A (2), pp. 224-234.

McFetridge Peter, S., Bodamyali, T., Horrocks, M. and Chaudhuri, J. B., 2004. Endothelial and smooth muscle cell seeding onto processed ex vivo arterial scaffolds using 3D vascular bioreactors. Asaio Journal, 50 (6), pp. 591-600.

McLoughlin, M., Mays, T. J. and Price, R., 2005. Growth spiral activity and step velocities on a crystal surface. Physical Review Letters, 95 (11), 115504/1-115504/4.

Mcclymont, D., 2011. Copper exchanged zeolites for ammonia reduction of NOx from biogas gas engines. In: DTC Summer Showcase 2011, 2011-07-11 - 2011-07-13, Bath.

Mcclymont, D., 2011. Multi-Step TPSR/QMS Technique to Study the Kinetics of NH3-SCR. In: International Symposium on Nitrogen Oxides' Emission Abatement 2011, 2011-09-04.

Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2012. Novel catalyst systems for deNOx. In: IChemE Catalysis for Energy Meeting, 2012-12-11, University of Birmingham.

Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2013. Novel catalyst systems for deNOx. In: DTC Symposium Series - Sustainable Industrial Catalysis, 2013-01-29, Bath.

Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2013. Silver catalysts for NOx storage and reduction using hydrogen. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26, London.

Mcclymont, D., Kolaczkowski, S. T. and Molloy, K. C., 2010. Catalyst system design for the control of NOx using hydrogen. In: DTC Summer Showcase 2010, 2010-07-08 - 2010-07-09, Bath.

Mcclymont, D., Kolaczkowski, S. T., Molloy, K. C. and Awdry, S., 2012. Novel catalyst systems for deNOx. In: DTC Summer Showcase 2012, 2012-07-09 - 2013-04-13, Bath.

Mellors, R., Benzeval, I., Eisenthal, R. and Hubble, J., 2010. Preparation of self-assembled microspheres and their potential for drug delivery. Pharmaceutical Development and Technology, 15 (1), pp. 105-111.

Messaritaki, A., Black, S. J., van der Walle, C. F. and Rigby, S. P., 2005. NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres. Journal of Controlled Release, 108 (2-3), pp. 271-281.

Miles, D., Cameron, P. J. and Mattia, D., 2014. Dye-sensitized solar cells using anodized ZnO nanowires. In: MRS Spring Meeting 2014, 2014-04-21 - 2014-04-25, San Francisco.

Minett, D., Mattia, D. and Jones, M., 2011. Conversion of carbon dioxide into useful feedstocks using carbon nanotube supports. In: Great Western CO2 meeting, 2011-06-06 - 2011-06-06, Bath.

Minett, D., Mattia, D., O'Byrne, J. and Jones, M., 2012. Novel approach for the production of monolith supported carbon nanotubes. In: ChemonTubes 2012, International meeting on the chemistry of nanotubes and graphene, 2012-04-01 - 2012-04-05, Archachon.

Minett, D., O'Byrne, J., Jones, M., Mattia, D. and Plucinski, P., 2013. Carbon dioxide conversion to hydrocarbons using structured carbon nanotube supports. In: SuBiCat 1: Symposium on sustainable catalytic conversions of renewable substrates, 2012-03-24 - 2013-03-26, St Andrews.

Minett, D., O'Byrne, J., Mattia, D. and Jones, M., 2012. Catalysts for carbon dioxide conversion using carbon nanotube supports. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28, Il Ciocco, Barga.

Ming, F., Howell, J., Acosta, F. and Hubble, J., 1993. Study on separation of conalbumin and lysozyme from high concentration fresh egg white at high flow rates by a novel ion-exchanger. Biotechnology and Bioengineering, 42 (9), pp. 1086-1090.

Mogh, P., Sharma, R. and Pereira-Guelakis, M., 2014. Extracellular matrix production from nanoscale substrate. US 8715718, 06 May 2014.

Moghe, P. V., Sharma, R. and Pereira, M., 2008. Methods, Systems, and Compositions for Extracellular Matrix Production. A61K 8/18, A61Q 13/00, C12P 21/06, 2008.

Moreno, T., Garcia-Serna, J., Plucinski, P., Sanchez-Montero, M. J. and Cocero, M. J., 2010. Direct synthesis of H2O2 in methanol at low pressures over Pd/C catalyst: Semi-continuous process. Applied Catalysis A General, 386 (1-2), pp. 28-33.

Morgan, S. M., Ainsworth, B. J., Kanczler, J. M., Babister, J. C., Chaudhuri, J. B. and Oreffo, R. O. C., 2009. Formation of a human-derived fat tissue layer in PDLLGA hollow fibre scaffolds for adipocyte tissue engineering. Biomaterials, 30 (10), pp. 1910-1917.

Muir, A. C., McKeown, P., Li, Y., Kobine, J. J. and Bird, M. R., 2013. The removal of food fat based soils during the washing of fabrics. Chemical Engineering Research & Design, 91 (9), pp. 1602-1613.

Munn, A. S., Amabilino, S., Stevens, T. W., Daniels, L. M., Clarkson, G. J., Millange, F., Lennox, M. J., Düren, T., Bourelly, S., Llewellyn, P. L. and Walton, R. I., 2015. Metal-organic frameworks from divalent metals and 1,4-benzenedicarboxylate with bidentate pyridine-N-oxide co-ligands. Crystal Growth and Design, 15 (2), pp. 891-899.

N

Narvaez Dinamarca, A., Torrente Murciano, L. and Chadwick, D., 2008. CO2 conversion via one-step synthesis of dimethyl ether (DME). In: 5th International Conference on Environmental Catalysis, 2008-08-31 - 2008-09-03, Queen's University, Belfast.

Nederlof, M. M., Kruithof, J. C., Hofman, J. A. M. H., de Koning, M., van der Hoek, J. P. and Bonne, P. A. C., 1998. Integrated multi-objective membrne systems application of reverse osmosis at the Amsterdam water supply. Desalination, 119 (1-3), pp. 263-273.

Nigo, R. Y., Chew, Y. M. J., Houghton, N. E., Paterson, W. R. and Wilson, D. I., 2009. Experimental studies of freezing fouling of model food fat solutions using a novel spinning disc apparatus. Energy & Fuels, 23 (12), pp. 6131-6145.

Noomrio, M. H., Zhang, R., Eisenthal, R. and Hubble, J., 2005. Characterisation of Hydrogel Gel Swelling by Molecular Exclusion. Biotechnology Letters, 27 (20), pp. 1587-1590.

Norén, L., Ting, V., Withers, R. L. and Van Tendeloo, G., 2001. An electron and x-ray diffraction investigation of Ni1+xTe2 and Ni1+xSe2CdI2/NiAs Type Solid Solution Phases. Journal of Solid State Chemistry, 161 (2), pp. 266-273.

Norén, L., Withers, R. L., Schmid, S., Brink, F. J. and Ting, V., 2006. Old friends in a new light: “SnSb” revisited. Journal of Solid State Chemistry, 179 (2), pp. 404-412.

Nuckols, M. L., Kolaczkowski, S., Awdry, S., Le, C. D., Smith, T. and Thomas, D., 2011. An initial assessment for the use of seawater as a method to remove metabolically-produced carbon dioxide from a submersible atmosphere. In: Oceans '11 MTS/IEEE Kona, 2011-09-19 - 2011-09-22, Hilton Waikoloa Village, Kona, Hawai‘i.

Nuckols, M., Kolaczkowski, S., Awdry, S., Smith, T. and Thomas, D., 2014. Hyperbaric testing of an alternative approach to remove carbon dioxide from underwater life support equipment. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering.Vol. 8A. American Society of Mechanical Engineers (ASME).

Nuckols, M.L., Kolaczkowski, S.T., Awdry, S., Le, C., Smith, T. and Thomas, D., 2013. An alternative method to remove carbon dioxide from submersible environments. In: Underwater Intervention Conference 2012 (UI2012). Curran Associates, pp. 316-324.

O

Ochońska, J., McClymont, D., Jodłowski, P.J., Knapik, A., Gil, B., Makowski, W., Łasocha, W., Kołodziej, A., Kolaczkowski, S. T. and Łojewska, J., 2012. Copper exchanged ultrastable zeolite Y - A catalyst for NH3-SCR of NOx from stationary biogas engines. Catalysis Today, 191 (1), pp. 6-11.

Odunsi, O. Y., He, Y. and Mays, T. J., 2007. Hydrogen storage in nanoporous carbon. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 423-430.

Odunsi, O. Y., He, Y. and Mays, T. J., 2005. Hydrogen storage on nanoporous carbons. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Oh, J. O., Kimb, G., Mattia, D. and Noh, H., 2011. A novel technique for fabrication of micro- and nanofluidic device with embedded single carbon nanotube. Sensors and Actuators B-Chemical, 154 (1), pp. 67-72.

P

Pabbruwe, M. B., Du, X., Stewart, K. and Chaudhuri, J. B., 2005. A comparison of microcarriers for the ex vivo expansion of ovine meniscal chondrocytes in the presence or absence of ascorbate-2-phosphate. International Journal of Experimental Pathology, 86 (3), A52-A53.

Parker, H., Jones, M. D. and Chuck, C., 2014. Fuel additives from the controlled depolymerization of lignin. In: 248th ACS National Meeting & Exposition, 2014-08-10 - 2014-08-14, San Francisco.

Parker, H., Spellman, J., Chuck, C. and Jones, M. D., 2014. Renewable fuel additives from depolymerized lignin. In: 248th ACS National Meeting & Exposition, 2014-08-10 - 2014-08-14, San Francisco.

Patterson, D., 2014. Overview of Separations’. In: Chemical Processes for a Sustainable Future. Royal Society of Chemistry.

Patterson, D., Bowstead, M., Tran, A. and James, B. J., 2012. Towards continuous wine making:The optimization of mixed matrix membranes for wine fining. Procedia Engineering, 44, pp. 131-132.

Patterson, D., Davey, C. and Rohani, R., 2014. Membrane separations : from purifications, minimisation, reuse and recycling to process intensification. In: Letcher, T., Scott, J. and Patterson, D. A., eds. Chemical Processes for a Sustainable Future. Cambridge, U. K.: Royal Society of Chemistry, pp. 467-497.

Patterson, D. and Scott, J. L., 2014. General concepts in sustainable chemical processes. In: Patterson, D., Scott, J. and Letcher, T., eds. Chemical Processes for a Sustainable Future. London, U. K.: Royal Society of Chemistry.

Patterson, D., Yenlau, L., Roengpithya, C., Gibbins, E. and Livingston, A., 2008. Membrane selectivity in the organic solvent nanofiltration of trialkylamine bases. Desalination, 218 (1-3), pp. 248-256.

Patterson, D. A., Havill, A., Costello, S., See-Toh, Y. H., Livingston, A. G. and Turner, A., 2009. Membrane characterisation by SEM, TEM and ESEM: the implications of dry and wetted microstructure on mass transfer through integrally skinned polyimide nanofiltration membranes. Separation and Purification Technology, 66 (1), pp. 90-97.

Patterson, D. A., Metcalfe, I. S., Xiong, F. and Livingston, A. G., 2002. Biodegradability of linear alkylbenzene sulfonates subjected to wet air oxidation. Journal of Chemical Technology & Biotechnology, 77 (9), pp. 1039-1049.

Patterson, D. A., Metcalfe, I. S., Xiong, F. and Livingston, A. G., 2001. Wet Air Oxidation of Linear Alkylbenzene Sulfonate 1. Effect of Temperature and Pressure. Industrial & Engineering Chemistry Research, 40 (23), pp. 5507-5516.

Patterson, D. A., Metcalfe, I. S., Xiong, F. and Livingston, A. G., 2001. Wet Air Oxidation of Linear Alkylbenzene Sulfonate 2. Effect of pH. Industrial & Engineering Chemistry Research, 40 (23), pp. 5517-5525.

Patton, A., Crittenden, B. D. and Perera, S. P., 2004. The linear driving force approximation for monolithic adsorbents. Transactions of the Institute of Chemical Engineers: Part A, 82, pp. 999-1009.

Patton, A., Crittenden, B. D. and Perera, S. P., 2004. Use of the linear driving force approximation to guide the design of monolithic adsorbents. Chemical Engineering Research & Design, 82 (A8), pp. 999-1009.

Peck, O., Chew, J., Bird, M. and Bolhuis, A., 2014. An assessment of the removal behaviour of biofilms grown under static and flow conditions. In: Fouling and Cleaning in Food Processing 2014: ‘Green Cleaning’. .

Peralta, J. M., Chew, Y. M. J. and Wilson, D. I., 2011. An analytical method for selecting the optimal nozzle external geometry for fluid dynamic gauging. Chemical Engineering Science, 66 (16), pp. 3579-3591.

Peralta, J. M., Chew, Y. M. J. and Wilson, D. I., 2011. Effect of nozzle external geometry on the pressure and shear stress exerted on the surface being gauged in fluid dynamic gauging. Chemical Engineering Research & Design, 89 (12), pp. 2540-2551.

Pereira, M., Sharma, R. I., Penkala, R., Gentzel, T. A., Schwarzbauer, J. E. and Moghe, P. V., 2007. Engineered cell-adhesive nanoparticles nucleate extracellular matrix assembly. Tissue Engineering Parts A, B, & C, 13 (3), pp. 567-578.

Perera, S. P., Bridgewater, J., Li, Y.-Y. and Crittenden, B. D., 2001. Hybrid Membrane Adsorbents For Fluidised Bed Separation. Transactions of the Institute of Chemical Engineers: Part A, 79.

Perera, S. P., Crittenden, B. C., Yang, M., Miachon, S. and Dalman, J. A., 2001. Microporous Inorganic Membranes for Fluid Bed Catalytic Cracker (FCC) Off Gas Recovery. In: Engineering With Membranes, 2001-01-01, Granada.

Perera, S. P., Crittenden, B. D. and Mehta, R., 2001. Treatment For Waste Oily Water & Wastewater Conference & Exhibition, Gran Cayman. In: Water Authority -Cayman Cayman Islands, 2001-01-01.

Perera, S., 2007. Biocompatible Drug Delivery Device. A61K9/70-WO2007052042 (A2), 10 May 2007.

Perera, S. and Tai, C.-C., 2011. Hollow fibres. D01D5/247 -AT513071 (T), 15 July 2011.

Perkins, E. L., Rigby, S. P., Edler, K. J. and Lowe, J., 2007. NMR cryoporometry and PFG studies of water diffusion in poly (lactic-co-glycolic acid) microspheres for drug delivery. Journal of Pharmacy and Pharmacology, 59, A17-A17.

Perkins, E., 2009. Nuclear Magnetic Resonance studies of controlled drug release devices. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Perkins, E. L., Lowe, J. P., Edler, K. J., Tanko, N. and Rigby, S. P., 2008. Determination of the percolation properties and pore connectivity for mesoporous solids using NMR cryodiffusometry. Chemical Engineering Science, 63 (7), pp. 1929-1940.

Phillips, W., Johnsen, T. E., Caldwell, N. and Chaudhuri, J. B., 2011. The difficulties of supplying new technologies into highly regulated markets: the case of tissue engineering. Technology Analysis and Strategic Management, 23 (3), pp. 213-226.

Pilkington, G. A., Thormann, E., Claesson, P. M., Fuge, G. M., Fox, O. J. L., Ashfold, M. N. R., Leese, H., Mattia, D. and Briscoe, W. H., 2011. Amontonian frictional behaviour of nanostructured surfaces. Physical Chemistry Chemical Physics, 13 (20), pp. 9318-9326.

Platt, S., Chaudhuri, J., Arnot, T. and Carpenter, K. J., 1997. Emulsion breakage using hydrophilic membranes as a coalescing aid. Acta Polytechnica Scandinavica. Chemical Technology and Metallurgy Series.

Plucinski, P. and Darragh, B., 2005. Preparation of alumina hollow fibers and their use as phase contactors for the removal of dissolved gases. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Plucinski, P., Bavykin, D., Kolaczkowski, S. and Lapkin, A., 2005. Liquid phase oxidation of organic feedstock in a compact multichannel reactor. Industrial & Engineering Chemistry Research, 44, pp. 9683-9690.

Plucinski, P., Arnot, T., Howell, J. A., Weisman, M. and Gilron, J., 2001. Removal of Organic Contaminants from High-Salt Industrial Streams using Micellar Enhanced Membrane Filtration. In: Engineering With Membranes, 2001-01-01, Granada.

Polisski, S., Goller, B., Lapkin, A., Fairclough, S. and Kovalev, D., 2008. Synthesis and catalytic activity of hybrid metal/silicon nanocomposites. Physica Status Solidi: Rapid Research Letters, 2 (3), pp. 132-134.

Polisski, S., Goller, B., Lapkin, A. and Kovalev, D., 2009. Hybrid metal/silicon nanocomposite systems and their catalytic activity. Physica Status Solidi (C), 6 (7), pp. 1575-1579.

Polisski, S., Goller, B., Wilson, K., Kovalev, D., Zaikowskii, V. and Lapkin, A., 2010. In situ synthesis and catalytic activity in CO oxidation of metal nanoparticles supported on porous nanocrystalline silicon. Journal of Catalysis, 271 (1), pp. 59-66.

Pound, J. C., Green, D. W., Chaudhuri, J. B., Roach, H. I. and Oreffo, R. O. C., 2006. Promotion of chondrogenesis and osteogenesis from mixed human mesenchymal progenitors within innovative polysaccharide capsules. Tissue Engineering, 12 (4), pp. 1030-1031.

Pound, J. C., Green, D. W., Chaudhuri, J. B., Mann, S., Roach, H. I. and Oreffo, R. O. C., 2006. Strategies to Promote Chondrogenesis and Osteogenesis from Human Bone Marrow Cells and Articular Chondrocytes Encapsulated in Polysaccharide Templates. Tissue Engineering, 12 (10), pp. 2789-2799.

Pourbafrani, M., Forgacs, G., Sárvári Horváth, I., Niklasson, C. and Taherzadeh, M. J., 2010. Production of biofuels, limonene and pectin from citrus wastes. Bioresource Technology, 101 (11), pp. 4246-4250.

Pourbafrani, M., Forgacs, G., Sárvári Horváth, I. and Taherzadeh, M. J., 2011. Framställning av mångahanda biprodukter från fasta citrusrester. SE0901415-0, 2011.

Pugsley, A., Bimbo, N. M., Physick, A., Noguera Diaz, A. N., Sharpe, J., Ting, V. and Mays, T. J., 2014. Fuel Gas Storage : The Challenge of Methane. In: ChemEngDayUK 2014, 2014-04-07 - 2014-04-08, Manchester.

Puértolas, B., Hill, A. K., García, T., Solsona, B. and Torrente-Murciano, L., 2015. In-situ synthesis of hydrogen peroxide in tandem with selective oxidation reactions : a mini-review. Catalysis Today, 248, pp. 115-127.

Q

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2009. Control of polyaniline deposition on microporous cellulose ester membranes by in situ chemical polymerization. Journal of Physical Chemistry B, 113 (45), pp. 14986-14993.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2011. Membrane potential and impedance studies of polyaniline composite membranes: effects of membrane morphology. Journal of Membrane Science, 385-386, pp. 67-75.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2009. Polyaniline deposition site control on microporous mixed cellulose ester membranes:Surface and in-pore polymerization. IOP Conference Series: Materials Science and Engineering, 4, 012009.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2011. Surface and Charge Transport Characterization of Polyaniline−Cellulose Acetate Composite Membranes. Journal of Physical Chemistry B, 115 (7), pp. 1652-1661.

Quignon, B., Pilkington, G. A., Thormann, E., Claesson, P. M., Ashfold, M. N. R., Mattia, D., Leese, H., Davis, S. A. and Briscoe, W. H., 2013. Sustained frictional instabilities on nanodomed surfaces:Stick–slip amplitude coefficient. ACS Nano, 7 (12), pp. 10850-10862.

Quiñones, D.H., Rey, A., Álvarez, P.M., Beltrán, F.J. and Plucinski, P.K., 2014. Enhanced activity and reusability of TiO2 loaded magnetic activated carbon for solar photocatalytic ozonation. Applied Catalysis B: Environmental, 144 (1), pp. 96-106.

R

Ramirez Canon, A., Mattia, D., Cameron, P. J. and Vezzoli, M., 2014. ZnO Nanostructured photo-catalytic films obtained by anodization and its application in the degradation of organic pollutants. In: 8th European Meeting on Solar Chemistry and Photocatalysis: Environmental Applications, 2014-06-25 - 2014-06-28, Thessaloniki.

Rashidi, H., Ellis, M. J., Cartmell, S. H. and Chaudhuri, J. B., 2010. Simvastatin release from poly(lactide-co-glycolide) membrane scaffolds. Polymers, 2 (4), pp. 709-718.

Rathbone, R. R., Greaves, M., Xia, T. X. and WerfillI, M. S., 2002. Downhole Conversion of Lloydminster Heavy Oil Using THAI-CAPRI Process. Journal of Canadian Petroleum Engineers, 78998, pp. 1-16.

Ren, S. R., Greaves, M. and Rathbone, R. R., 2002. Air injection LTO process: an IOR technique for light-oil reservoirs. SPE Journal (Society of Petroleum Engineers), 7 (1), pp. 90-99.

Rey, A., Quinones, D. H., Alvarez, P. M., Beltran, F. J. and Plucinski, P. K., 2012. Simulated solar-light assisted photocatalytic ozonation of metoprolol over titania-coated magnetic activated carbon. Applied Catalysis B: Environmental, 111-112, pp. 246-253.

Rigby, S. P., 2007. A Unified Model for the Effects of Surface Heterogeneity on Gas Absorption and Surface Diffusion on Silica Surfaces. In: Fong, P. A., ed. Colloid and Surface Research Trends. Nova Science, pp. 147-167.

Rigby, S. P., 2001. Experimental design for high-throughput experimentation. In: Combinatorial Approaches to Chemistry and Biology III, R.S.C., 2001-01-01, Cambridge.

Rigby, S. P., 2002. Structural models for the interpretation of gas-solid adsorption and mercury porosimetry data. In: Hubbard, A., ed. Encyclopedia of Surface and Colloid Science. New York: Marcel Dekker, pp. 4825-4852.

Rigby, S. P., Chigada, P. I., Evbuomvan, I. O., Chudek, J. A., Miri, T., Wood, J. and Bakalis, S., 2008. Experimental and modelling studies of the kinetics of mercury retraction from highly confined geometries during porosimetry in the transport and the quasi-equilibrium regimes. Chemical Engineering Science, 63 (24), pp. 5771-5788.

Rigby, S. P., Fairhead, M. and van der Walle, C. F., 2008. Engineering silica particles as oral drug delivery vehicles. Current Pharmaceutical Design, 14 (18), pp. 1821-1831.

Rigby, S. P. and Fletcher, R. S., 2004. Interfacing mercury porosimetry with nitrogen sorption. Particle & Particle Systems Characterization, 21, pp. 138-148.

Rigby, S. P., Watt-Smith, M. J. and Fletcher, R. S., 2005. Integrating gas sorption with mercury porosimetry. Adsorption, 11, pp. 201-206.

Rigby, S. P., 2003. A Model for the Surface Diffusion of Molecules on a Heterogeneous Surface. Langmuir, 19 (2), pp. 364-376.

Rigby, S. P., 2002. New methodologies in mercury porosimetry. Studies in Surface Science and Catalysis, 144 (Characterization of ), pp. 185-192.

Rigby, S. P., 2005. Predicting surface diffusivities of molecules from equilibrium adsorption isotherms. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 262 (1-3), pp. 139-149.

Rigby, S. P., 2003. Structure-transport relationships in the surface diffusion of molecules over heterogeneous surfaces within porous catalysts. Catalysis in Application [Papers presented at the International Symposium on Applied Catalysis]

Rigby, S. P., Barwick, D., Fletcher, R. S. and Riley, S. N., 2003. Interpreting mercury porosimetry data for catalyst supports using semi-empirical alternatives to the Washburn equation. Applied Catalysis A General, 238 (2), pp. 303-318.

Rigby, S. P., Beanlands, K., Evbuomwan, I. O., Watt-Smith, M. J., Edler, K. J. and Fletcher, R. S., 2004. Nanocasting of novel, designer-structured catalyst supports. Chemical Engineering Science, 59 (22-23), pp. 5113-5120.

Rigby, S. P., Chigada, P. I., Perkins, E. L., Watt-Smith, M. J., Lowe, J. P. and Edler, K. J., 2008. Fundamental studies of gas sorption within mesopores situated amidst an inter-connected, irregular network. Adsorption, 14 (2-3), pp. 289-307.

Rigby, S. P., Chigada, P. I., Wang, J., Wilkinson, S. K., Bateman, H., Al-Duri, B., Wood, J., Bakalis, S. and Miri, T., 2011. Improving the interpretation of mercury porosimetry data using computerised X-ray tomography and mean-field DFT. Chemical Engineering Science, 66 (11), pp. 2328-2339.

Rigby, S. P. and Daut, S., 2002. A statistical model for the heterogeneous structure of porous catalyst pellets. Advances in Colloid and Interface Science, 98 (2), pp. 87-119.

Rigby, S. P., Evbuomwan, I. O., Watt-Smith, M. J., Edler, K. and Fletcher, R. S., 2006. Using nano-cast model porous media and integrated gas sorption to improve fundamental understanding and data interpretation in mercury porosimetry. Particle & Particle Systems Characterization, 23 (1), pp. 82-93.

Rigby, S. P. and Fletcher, R. S., 2004. Experimental Evidence for Pore Blocking as the Mechanism for Nitrogen Sorption Hysteresis in a Mesoporous Material. Journal of Physical Chemistry B, 108 (15), pp. 4690-4695.

Rigby, S. P., Fletcher, R. S., Raistrick, J. H. and Riley, S. N., 2002. Characterisation of porous solids using a synergistic combination of nitrogen sorption, mercury porosimetry, electron microscopy and micro-focus X-ray imaging techniques. Physical Chemistry Chemical Physics, 4 (14), pp. 3467-3481.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2001. Characterization of Macroscopic Structural Disorder in Porous Media Using Mercury Porosimetry. Journal of Colloid and Interface Science, 240 (1), pp. 190-210.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2004. Characterization of porous solids using integrated nitrogen sorption and mercury porosimetry. Chemical Engineering Science, 59 (1), pp. 41-51.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2002. Determination of the Multiscale Percolation Properties of Porous Media Using Mercury Porosimetry. Industrial & Engineering Chemistry Research, 41 (5), pp. 1205-1226.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2003. Determination of the cause of mercury entrapment during porosimetry experiments on sol-gel silica catalyst supports. Applied Catalysis A General, 247 (1), pp. 27-39.

Rigby, S. P., Van der Walle, C. F. and Raistrick, J. H., 2004. Determining drug spatial distribution within controlled delivery tablets using MFX imaging. Journal of Controlled Release, 96 (1), pp. 97-100.

Rigby, S. P., Watt-Smith, M. J., Chigada, P., Chudek, J. A., Fletcher, R. S., Wood, J., Bakalis, S. and Miri, T., 2006. Studies of the entrapment of non-wetting fluid within nanoporous media using a synergistic combination of MRI and micro-computed X-ray tomography. Chemical Engineering Science, 61 (23), pp. 7579-7592.

Rippington, S., Cunningham, D. and England, R., 2008. Structure and petrology of the Altan Uul ophiolite: new evidence for a Late Carboniferous suture in the Gobi Altai, southern Mongolia. Journal of the Geological Society, 165 (3), pp. 711-723.

Roengpithya, C., Patterson, D. A., Gibbins, E. J., Taylor, P. C. and Livingston, A. G., 2006. Investigation of the Compatibility of Racemization and Kinetic Resolution for the Dynamic Kinetic Resolution of an Allylic Alcohol. Industrial & Engineering Chemistry Research, 45 (21), pp. 7101-7109.

Roengpithya, C., Patterson, D. A., Livingston, A. G., Taylor, P. C., Irwin, J. L. and Parrett, M. R., 2007. Towards a continuous dynamic kinetic resolution of 1-phenylethylamine using a membrane assisted, two vessel process. Chemical Communications, 33, pp. 3462-3463.

Roengpithya, C., Patterson, D. A., Taylor, P. C. and Livingston, A. G., 2006. Development of stable organic solvent nanofiltration membranes for membrane enhanced dynamic kinetic resolution. Desalination, 199 (1-3), pp. 195-197.

Rollings, M. D., Grogan, M. D. W., Xiao, L. M., England, R., Birks, T. A. and Wadsworth, W. J., 2010. Supercontinuum generation in tapered fibres embedded in silica aerogel. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Rosalam, S. and England, R., 2006. Review of xanthan gum production from unmodified starches by Xanthomonas campestris sp. Enzyme Microbial Technology, 39 (2), pp. 197-207.

Rossi, M., Sharma, R., Pawelski, E. and Moghe, P., 2009. Nanoparticles as biodynamic substrates for engineering cell fate. In: Rege, K. and Medintz, I., eds. Methods in Bioengineering: Nanoscale Bioengineering and Nanomedicine. Boston, MA.: Artech House, pp. 85-106.

Rouquerol, J., Baron, G., Denoyel, R., Giesche, H., Groen, J., Klobes, P., Levitz, P., Neimark, A. V., Rigby, S., Skudas, R., Sing, K., Thommes, M. and Unger, K., 2012. Liquid intrusion and alternative methods for the characterization of macroporous materials (IUPAC Technical Report). Pure and Applied Chemistry, 84 (1), pp. 107-136.

Rowlandson, J., Edler, K., Parker, S. and Ting, V., 2015. Characterisation of Nanoporous Carbons for Hydrogen Storage Materials. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2014-12-15 - 2014-12-17, Birmingham.

Rowlandson, J., Parker, S. C., Edler, K. J. and Ting, V., 2014. Analysis of porosity in activated carbons : Reconciling gas sorption with scattering data. In: 10th International Symposium on the Characterization of Porous Solids (COPS-X), 2014-05-11 - 2014-05-14, Granada.

Rowlandson, J., Ting, V. and Parker, S. C., 2014. Structural characterisation and molecular modelling of porous carbons for hydrogen storage. In: DTC symposium series - Hydrogen storage, 2014-01-30 - 2014-01-30, Bath.

Ruffino, L., Mann, R., Oldman, R. J., Rigby, S. and Allen, S., 2001. Using low melting point alloy intrusion to quantify pore structure: studies on an alumina support. Studies in Surface Science and Catalysis, 133, pp. 155-162.

S

Sahoo, P. K., Chew, Y. M. J., Mercade-Prieto, R., Wilson, D. I. and Dai, X. W., 2008. Fluid dynamic gauging studies of swelling behaviour of whey protein gels in NaOH/NaCl solutions. International Journal of Food Science and Technology, 43 (10), pp. 1901-1907.

Saidi, O., Bamford, M. J., Blacker, A. J., Lynch, J., Marsden, S. P., Plucinski, P., Watson, R. J. and Williams, J. M. J., 2010. Iridium-catalyzed formylation of amines with paraformaldehyde. Tetrahedron Letters, 51 (44), pp. 5804-5806.

Saidi, O., Blacker, A. J., Lamb, G. W., Marsden, S. P., Taylor, J. E. and Williams, J. M. J., 2010. Borrowing hydrogen in water and ionic liquids: iridium-catalyzed alkylation of amines with alcohols. Organic Process Research & Development, 14 (4), pp. 1046-1049.

Saikhwan, P., Mercade-Prieto, R., Chew, Y. M. J., Gunasekaran, S., Paterson, W. R. and Wilson, D. I., 2010. Swelling and dissolution in cleaning of whey protein gels. Food and Bioproducts Processing, 88 (C4), pp. 375-383.

Sanchez Liarte, F., 2009. Performance of electrically regenerable monolithic adsorbents for VOC control. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Santori, F. and Hubble, J., 2003. Isocratic separation of monosaccharides using immobilized Concanavalin A. Journal of Chromatography A, 1003 (1-2), pp. 123-126.

Santori, F. and Hubble, J., 2005. Low affinity pair size exclusion chromatography. Separation Science and Technology, 40 (8), pp. 1733-1748.

Sarbatly, R. and England, R., 2004. Critical review of membrane bioreactor system used for continuous production of hydrolyzed starch. Chemical and Biochemical Engineering Quarterly, 18 (2), pp. 155-165.

Sarbatly, R., Krishnaiah, D. and England, R., 2007. Continuous recycle enzymatic membrane reactor system for in-situ production of pure and sterile glucose solution. Journal of Applied Sciences, 7 (15), pp. 2063-2068.

Sarbatly, R., Krishnaiah, D., England, R., Abang, S. and Jeffery, J., 2007. Comparison studies of applied pressure and concentration gradient driving forces in ceramic nano-filtration membrane for the production of intravenous salt solution. Journal of Applied Sciences, 7 (15), pp. 2069-2075.

Sargeant, L., 2013. Focus on the future. EPRSC Pioneer Magazine, 9, pp. 30-31.

Sargeant, L., 2013. Waste to wealth: renewable lipids from Rhodotorula glutinis cultured on waste resources. In: 6th International Conference on Green and Sustainable Chemistry, 2013-08-04 - 2013-08-07, Nottingham.

Sciancalepore, A. G., Sallustio, F., Girardo, S., Passione, L. G., Camposeo, A., Mele, E., Di Lorenzo, M., Costantino, V., Schena, F. P. and Pisignano, D., 2014. A bioartificial renal tubule device embedding human renal stem/progenitor cells. PLoS ONE, 9 (1), e87496.

Scott, J. A., Howell, J., Arnot, T., Smith, K. L. and Bruska, M., 1996. Enhanced system k L a and permeate flux with a ceramic membrane bioreactor. Biotechnology Techniques, 10 (4), pp. 287-290.

Shah, A., Fishwick, R., Wood, J., Leek, G., Greaves, M. and Rigby, S. P., 2009. A Review of Novel Techniques for Heavy Oil and Bitumen Extraction and Recovery. In: 8th World Congress of Chemical Engineering, 2009-08-23 - 2009-08-27, Montreal, Quebec.

Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2011. Experimental optimization of catalytic process in situ for heavy-oil and bitumen upgrading. Journal of Canadian Petroleum Technology, 50 (11-12), pp. 33-47.

Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2010. Experimental optimization of catalytic process in-situ for heavy oil and bitumen upgrading. In: Canadian Unconventional Resources and International Petroleum Conference 2010, October 19, 2010 - October 21, 2010, 2010-10-19 - 2010-10-21, Calgary Alberta.

Shah, A., Fishwick, R., Wood, J., Leeke, G., Rigby, S. and Greaves, M., 2010. A review of novel techniques for heavy oil and bitumen extraction and upgrading. Energy & Environmental Science, 3 (6), pp. 700-714.

Shah, H. J., Fontecchio, A. K., Mattia, D. and Gogotsi, Y., 2008. Field controlled nematic-to-isotropic phase transition in liquid crystal-carbon nanotube composites. Journal of Applied Physics, 103 (6), 064314/1-064314/5.

Shah, H. J., Fontecchio, A. K., Rossi, M. P., Mattia, D. and Gogotsi, Y., 2006. Imaging of liquid crystals confined in carbon nanopipes. Applied Physics Letters, 89 (4), 043123/1-043123/3.

Shamiryan, D., Paraschiv, V., Eslava, S., Demand, M., Baklanov, M., Beckx, S. and Boullart, W., 2007. Profile control of novel non-Si gates using B Cl3 N2 plasma. Journal of Vacuum Science & Technology B, 25 (3), pp. 739-744.

Shamiryan, D., Paraschiv, V., Eslava, S., Demand, M., Baklanov, M. and Boullart, W., 2006. BCl/N plasma for advanced non-Si gate patterning. In: Materials Research Society Symposium Proceedings.Vol. 913. , pp. 105-110.

Shariffuddin, J. H., Jones, M. I. and Patterson, D. A., 2013. Greener photocatalysts:Hydroxyapatite derived from waste mussel shells for the photocatalytic degradation of a model azo dye wastewater. Chemical Engineering Research & Design, 91 (9), pp. 1693-1704.

Sharma, R. I., Pereira, M., Schwarzbauer, J. E. and Moghe, P. V., 2006. Albumin-derived nanocarriers : Substrates for enhanced cell adhesive ligand display and cell motility. Biomaterials, 27 (19), pp. 3589-3598.

Sharma, R. I., Schwarzbauer, J. E. and Moghe, P. V., 2011. Nanomaterials can dynamically steer cell responses to biological ligands. Small, 7 (2), pp. 242-251.

Sharma, R. I., Shreiber, D. I. and Moghe, P. V., 2008. Nanoscale variation of bioadhesive substrates as a tool for engineering of cell matrix assembly. Tissue Engineering Part A, 14 (7), pp. 1237-1250.

Sharma, S. K., Bishopp, S. D., Allen, C. L., Lawrence, R., Bamford, M. J., Lapkin, A. A., Plucinski, P., Watson, R. J. and Williams, J. M. J., 2011. Copper-catalyzed rearrangement of oximes into primary amides. Tetrahedron Letters, 52 (33), pp. 4252-4255.

Sharma, S. K., Sidhpuria, K. B. and Jasra, R. V., 2011. Ruthenium containing hydrotalcite as a heterogeneous catalyst for hydrogenation of benzene to cyclohexane. Journal of Molecular Catalysis A: Chemical, 335 (1-2), pp. 65-70.

Sharpe, J., 2015. Modelling Hydrogen Storage in Nanoporous Materials for use in Aviation. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Sharpe, J., 2013. Modelling hydrogen storage in nanoporous materials for use in aviation. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2013-12-16 - 2013-12-18, Birmingham.

Sharpe, J., 2013. The modelling of hydrogen storage in nanoporous materials. In: UKERC Summer School, 2013-07-07 - 2013-07-12, Warwick.

Sharpe, J., Bimbo, N., Noguera Díaz, A. J., Ting, V., Rushworth, A. and Mays, T., 2013. A new generalised model for supercritical sorption in nanoporous materials. In: 11th International Conference on Fundamentals of Adsorption, 2013-05-19 - 2013-05-24, Baltimore.

Sharpe, J., Burrows, A., Godula-Jopek, A. and Mays, T., 2012. Hydrogen storage in nanoporous materials for aerospace applications. In: EADS Innovation Works PhD Showcase, 2012-05-27 - 2012-05-28, Bristol.

Sharpe, J. E., Bimbo, N., Ting, V. P., Rechain, B., Joubert, E. and Mays, T. J., 2015. Modelling the potential of adsorbed hydrogen for use in aviation. Microporous and Mesoporous Materials, 209, pp. 135-140.

Sharpless, C. M., Aeschbacher, M., Page, S. E., Wenk, J., Sander, M. and McNeill, K., 2014. Photooxidation-induced changes in optical, electrochemical, and photochemical properties of humic substances. Environmental Science and Technology, 48 (5), pp. 2688-2696.

Shearer, C., Velleman, L., Acosta, F., Ellis, A., Voelcker, N., Mattia, D. and Shapter, J., 2010. Water transport through nanoporous materials: Porous silicon and single walled carbon nanotubes. In: ICONN 2010 - Proceedings of the 2010 International Conference on Nanoscience and Nanotechnology. Piscataway, NJ: IEEE Computer Society, pp. 196-199.

Shiko, E., 2013. NMR and Gas Sorption Studies of Structure-Transport Relationships in Porous Media. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Shipley, R. J., Davidson, A. J., Chan, K., Chaudhuri, J. B., Waters, S. L. and Ellis, M. J., 2011. A strategy to determine operating parameters in tissue engineering hollow fiber bioreactors. Biotechnology and Bioengineering, 108 (6), pp. 1450-1461.

Shipley, R. J. and Ellis, M. J., 2009. Characterization of fluid and protein transport properties in hollow fibre membrane scaffolds. European Cells and Materials, 18 (Supplement 2), p. 40.

Shipley, R. J. and Ellis, M. J., 2009. PLGA hollow fibre membrane scaffolds and serum protein interactions. European Cells and Materials, 18 (Supplement 2), p. 62.

Shipley, R. J., Waters, S. L. and Ellis, M. J., 2011. Fluid and mass transport modelling to drive the design of cell-packed hollow fibre bioreactors. European Cells and Materials, 22 (Supplement 3), p. 72.

Silverman, A. I., Nguyen, M. T., Schilling, I. E., Wenk, J. and Nelson, K. L., 2015. Sunlight Inactivation of Viruses in Open-Water Unit Process Treatment Wetlands: Modeling Endogenous and Exogenous Inactivation Rates. Environmental Science & Technology, 49 (5), pp. 2757-2766.

Sim Lee, Y., 2009. The development of controlled-chemotherapy drug delivery system. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Sima-Ella, E. and Mays, T. J., 2005. Analysis of the oxidation reactivity of carbonaceous materials using thermogravimetric analysis. Journal of Thermal Analysis and Calorimetry, 80 (1), pp. 109-113.

Sima-Ella, E. and Mays, T., 2005. Oxidation reactivity of coal chars: a simple kinetic analysis. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Sima-Ella, E., Yuan, G. and Mays, T., 2005. A simple kinetic analysis to determine the intrinsic reactivity of coal chars. Fuel, 84 (14-15), pp. 1920-1925.

Sinha, S., Pia Rossi, M., Mattia, D., Gogotsi, Y. and Bau, H. H., 2007. Induction and measurement of minute flow rates through nanopipes. Physics of Fluids, 19 (1), 013603/1-013603/8.

Skouteris, G., Arnot, T., Jraou, M., Feki, F. and Sayadi, S., 2014. Modelling energy consumption in membrane bioreactors for waste water treatment in North Africa. Water Environment Research, 86 (3), pp. 232-244.

Skouteris, G. S., 2010. Low Energy Membrane Bioreactors for Decentralised Waste Water Treatment. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Smith, M., McFetridge, P., Bodamyali, T., Chaudhuri, J. B., Howell, J. A., Stevens, C. R. and Horrocks, M., 2000. Porcine-derived collagen as a scaffold for tissue engineering. Food and Bioproducts Processing, 78 (C1), pp. 19-24.

Smugowski, H. J., 2011. Magnetic nanoparticulate catalysts in flow processes. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Somphon, W., Ting, V., Liu, Y., Withers, R. L., Zhou, Q. and Kennedy, B. J., 2006. Local crystal chemistry, structured diffuse scattering and the dielectric properties of (Bi1−xYx)2(MIIINbV)O7 (M=Fe3+, In3+) Bi-pyrochlores. Journal of Solid State Chemistry, 179 (8), pp. 2495-2505.

Stewart, K., Pabbruwe, M., Dickinson, S., Hollander, A. P. and Chaudhuri, J. B., 2007. The effect of growth factor treatment on meniscal chondrocyte proliferation and differentiation on polyglycolic acid scaffolds. Tissue Engineering, 13 (2), pp. 271-280.

Stockford, C., Brandon, N., Irvine, J., Mays, T., Metcalfe, I., Book, D., Ekins, P., Kucernak, A., Molkov, V., Steinberger-Wilckens, R., Shah, N., Dodds, P., Dueso, C., Samsatli, S. and Thompson, C., 2015. H2FC SUPERGEN:an overview of the hydrogen and fuel cell research across the UK. International Journal of Hydrogen Energy, 40 (15), pp. 5534-5543.

Storm, M. P., Orchard, C. B., Bone, H. K., Chaudhuri, J. B. and Welham, M. J., 2010. Three-dimensional culture systems for the expansion of pluripotent embryonic stem cells. Biotechnology and Bioengineering, 107 (4), pp. 683-695.

Sytniewski, L. J., Lapkin, A. A., Stepanov, S. and Wang, W. N., 2008. CFD optimisation of up-flow vertical HVPE reactor for GaN growth. Journal of Crystal Growth, 310 (14), pp. 3358-3365.

Sánchez Monsalve, D. A., 2014. Downhole Gasification (DHG) For Improved Oil Recovery. Thesis (Doctor of Philosophy (PhD)). University of Bath.

T

Tai, C. C., Perera, S. P. and Crittenden, B. D., 2005. Development of adsorbent hollow fibres for environmental applications. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Tang, M., Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2003. A reversible hydrogel membrane for controlling the delivery of macromolecules. Biotechnology and Bioengineering, 82 (1), pp. 47-53.

Tang, M., Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2004. NAD-sensitive hydrogel for the release of macromolecules. Biotechnology and Bioengineering, 87 (6), pp. 791-796.

Tanko, N. L., 2011. Transport Relationships in Porous Media as a Model for Oil Reservoir Rocks. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Tare, R. S., Forsey, R. W., Chaudhuri, J. B. and Oreffo, R. O. C., 2007. Engineering cartilaginous explants using human stro-1+progenitors, alginate scaffolds and perfusion bioreactors. Tissue Engineering, 13 (7), p. 1688.

Taylor, P. C., Livingston, A. G., Gibbins, E. J., Irwin, J. L., Muir, J. C., Patterson, D. A. and Roengpithya, C., 2005. An Improved Protocol for the Synthesis and Nanofiltration of Kim and Park’s Aminocyclopentadienyl Ruthenium Chloride Racemisation Catalyst. Synlett, 2005 (19), pp. 2993-2995.

Teghammar, A., Forgács, G., Sárvári Horváth, I. and Taherzadeh, M. J., 2014. Techno-economic study of NMMO pretreatment and biogas production from forest residues. Applied Energy, 116, pp. 125-133.

Ting, V. and Doan, H., 2014. Use of waste TPA in the synthesis of a metal organic framework (MOF) for use in hydrogen storage. In: Scientific conference on Oil Refining and Pertrochemical Engineering (ORPE 2014), 2014-10-08 - 2014-10-10, Hanoi.

Ting, V., Doan, H., Wagner, J. and Chuck, C., 2014. The application of nanoporous materials to problems in sustainable energy. In: Scientific conference on Oil Refining and Pertrochemical Engineering (ORPE 2014), 2014-10-08 - 2014-10-10, Hanoi.

Ting, V., Liu, Y., Norén, L., Withers, R. L., Goossens, D. J., James, M. and Ferraris, C., 2004. A structure, conductivity and dielectric properties investigation of A3CoNb2O9 (A=Ca2+, Sr2+, Ba2+) triple perovskites. Journal of Solid State Chemistry, 177 (12), pp. 4428-4442.

Ting, V., Liu, Y. and Withers, R., 2006. A temperature-dependent structural investigation of electrical transitions in A3conb2o9 perovskites (A=Ca2+, Sr2+, Ba2+). Physica B Condensed Matter, 385-386 (1), pp. 558-560.

Ting, V., Liu, Y., Withers, R. L., Norén, L., James, M. and Fitz Gerald, J. D., 2006. A structure and phase analysis investigation of the “1:1” ordered A2InNbO6 perovskites (A=Ca2+, Sr2+, Ba2+). Journal of Solid State Chemistry, 179 (2), pp. 551-562.

Ting, V. P., Henry, P. F., Kohlmann, H., Wilson, C. C. and Weller, M. T., 2010. Structural isotope effects in metal hydrides and deuterides. Physical Chemistry Chemical Physics, 12 (9), pp. 2083-2088.

Ting, V. P., Henry, P. F., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2009. In situ neutron powder diffraction and structure determination in controlled humidities. Chemical Communications, 2009 (48), pp. 7527-7529.

Ting, V. P., Henry, P. F., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2012. Probing hydrogen positions in hydrous compounds:information from parametric neutron powder diffraction studies. Physical Chemistry Chemical Physics, 14 (19), pp. 6914-6921.

Ting, V. P., Schmidtmann, M., Henry, P. F., Dann, S. E., Crisp, J. L., Wilson, C. C. and Weller, M. T., 2010. The kinetics of bulk hydration of the disaccharides α-lactose and trehalose by in situ neutron powder diffraction. MedChemComm, 1 (5), pp. 345-348.

Ting, V. P., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2010. Cisplatin: polymorphism and structural insights into an important chemotherapeutic drug. Angewandte Chemie-International Edition, 49 (49), pp. 9408-9411.

Torrente Murciano, L. and Chadwick, D., 2009. Direct Synthesis of H2O2 over Au-Pd catalysts for selective oxidation. In: IX Europacat, 2009-09-01, Salamanca.

Torrente Murciano, L. and Chadwick, D., 2009. Direct synthesis of H2O2 for green selective oxidation. In: 6th World Congress on Oxidation Catalysis, 2009-07-01, Lille.

Torrente Murciano, L. and Chadwick, D., 2008. Generation of hydrogen peroxide for green selective oxidation. In: 20th International Symposium on Chemical Reaction Engineering, 2008-09-01, Kyoto.

Torrente Murciano, L. and Chadwick, D., 2008. Selective oxidation with hydrogen peroxide. In: Rideal Conference on Catalysis, 2008-03-01, Cambridge.

Torrente Murciano, L., Chadwick, D., White, V. and Petrocelli, F., 2009. Removal of SOz and NOx from oxyfuel-derived CO2. In: 1st Oxyfuel Conference, 2009-09-01, Cottbus.

Torrente Murciano, L., Chadwick, D., White, V. and Petrocelli, F., 2010. Sour Compression process for the removal of SOx and NOS from oxyfuel derived CO2. In: 10th International Conference on Greenhouse Gas Control Technologies, 2010-09-01, Amsterdam, Holland.

Torrente Murciano, L., García- García, F., Li, K. and Chadwick, D., 2011. Hollow fibre membrane reactors for high yields: catalysis and process integration. In: 10th International Conference on Catalysis in Membrane Reactors (ICCMR10), 2011-06-20 - 2011-06-24, St Petersburg, Russia.

Torrente Murciano, L., Gilbank, A., Puertolas, B., Garcia, T., Solsona, B. and Chadwick, D., 2013. Shape-dependency activity of nanostructured CeO in the total oxidation of polycyclic aromatic hydrocarbons. Applied Catalysis B: Environmental, 132-133, pp. 116-122.

Torrente Murciano, L., Lapkin, A., Bavykin, D., Walsh, F. and Wilson, K., 2007. Highly selective Pd/titanate nanotube catalysts for the double-bond migration reaction. Journal of Catalysis, 245 (2), pp. 272-278.

Torrente Murciano, L., White, V., Petrocelli, F. and Chadwick, D., 2011. Sour compression process for the removal of SOx and NOx from oxyfuel-derived CO2. Energy Procedia, 4, pp. 908-916.

Torrente-Murciano, L., Lapkin, A., Nielsen, D. J., Fallis, I. and Cavell, K. J., 2010. Telomerisation of long-chain dienes with alcohols using Pd(IMes)(dvds) catalyst. Green Chemistry, 12 (5), pp. 866-869.

Torrente-Murciano, L., Lapkin, A. A. and Chadwick, D., 2010. Synthesis of high aspect ratio titanate nanotubes. Journal of Materials Chemistry, 20 (31), pp. 6484-6489.

Torrente-Murciano, L., Nielsen, D., Jackstell, R., Beller, M., Cavell, K. and Lapkin, A. A., 2015. Selective telomerisation of isoprene with methanol by a heterogeneous palladium resin catalyst. Catalysis Science and Technology, 5 (2), pp. 1206-1212.

Torrente-Murciano, L., Villager, T. and Chadwick, D., 2015. Selective oxidation of salicylic alcohol to aldehyde with O2/H2 using Au-Pd on titanate nanotubes catalysts. ChemCatChem, 7 (6), pp. 925-927. Item availability may be restricted.

Torrente-Murciano, L., White, V. and Chadwick, D., 2009. Removal of SOx and NOx from oxyfuel-derived CO2. In: 1st Oxyfuel Combustion Conference, 2009-09-08 - 2009-09-11, Cottbus.

Tran, A. T. T., Patterson, D. A. and James, B. J., 2012. Investigating the feasibility of using polysulfone-montmorillonite composite membranes for protein adsorption. Journal of Food Engineering, 112 (1-2), pp. 38-49.

Turner, I. G., Bowen, C. R., Baxter, F. R., Gittings, J. and Chaudhuri, J. B., 2011. The effect of poling on the in vitro response to poled HA and HABT composites for clinical applications. In: 24th European Conference on Biomaterials, EBS 2011, 2011-09-04 - 2011-09-08, Dublin.

Turta, A. T., Coates, R. and Greaves, M., 2009. Paper 2009-150: In-Situ Combustion in Oil Reservoirs Underlain by Bottom Water. Review of the Field and Laboratory Tests. In: Canadian International Petroleum Conference, 2009-06-16 - 2009-06-18, Calgary, Alberta.

Turta, A. T., Singhal, A. K., Xia, T. X., Greaves, M., Goldman, J. and Ivory, J., 2009. Preliminary considerations on application of steamflooding in a toe-to-heel configuration. Journal of Canadian Petroleum Technology, 48 (11), pp. 41-50.

ter Laak, T., Kooij, P. J. F., Tolkamp, H. and Hofman, J., 2014. Different compositions of pharmaceuticals in Dutch and Belgian rivers explained by consumption patterns and treatment efficiency. Environmental Science and Pollution Research, 21 (22), pp. 12843-12855.

V

Vaisanen, P., Bird, M. R. and Nystrom, M., 2002. Treatment of UF membranes with simple and formulated cleaning agents. Food and Bioproducts Processing, 80 (C2), pp. 98-108.

Van Der Hoek, J. P., Rijnbende, D. O., Lokin, C. J. A., Bonné, P. A. C., Loonen, M. T. and Hofman, J. A. M. H., 1998. Electrodialysis as an alternative for reverse osmosis in an integrated membrane system. Desalination, 117 (1-3), pp. 159-172.

Van der Aa, L. T. J., Kors, L. J., Wind, A. P. M., Hofman, J. A. M. H. and Rietveld, L. C., 2002. Nitrification in rapid sand filter:Phosphate limitation at low temperatures. Water Science and Technology : Water Supply, 2 (1), pp. 37-46.

Van der Hoek, J. P., Hofman, J. A. M. H., Bonné, P. A. C., Nederlof, M. M. and Vrouwenvelder, H. S., 2000. RO treatment:Selection of a pretreatment scheme based on fouling characteristics and operating conditions based on environmental impact. Desalination, 127 (1), pp. 89-101.

Van der Hoek, J. P., Hofman, J. A. M. H. and Graveland, A., 2000. Benefits of ozone-activated carbon filtration in integrated treatment processes, including membrane systems. Journal of Water Supply: Research and Technology - AQUA, 49 (6), pp. 341-356.

Vrouwenvelder, H. S., Van Paassen, J. A. M., Folmer, H. C., Hofman, J. A. M. H., Nederlof, M. M. and Van Der Kooij, D., 1998. Biofouling of membranes for drinking water production. Desalination, 118 (1-3), pp. 157-166.

W

Wadsworth, W. J., Grogan, M. D. W., Xiao, L. M., Rollings, M. D., England, R. and Birks, T. A., 2011. Aerogel-enhanced tapers and fibres. In: 2011 IEEE Winter Topicals, WTM 2011. Piscataway, NJ: IEEE Computer Society, pp. 193-194.

Walsh, F. C., Bavykin, D. V., Torrente Murciano, L., Lapkin, A. A. and Cressey, B. A., 2006. Synthesis of novel composite materials via the deposition of precious metals onto protonated titanate (TiO2) nanotubes. Transactions of the Institute of Metal Finishing, 84 (6), pp. 293-299.

Wang, J., Hassan, F., Chigada, P. I., Rigby, S. P., Al-Duri, B. and Wood, J., 2009. Coke Formation and Characterization During 1-Hexene Isomerization and Oligomerization over H-ZSM-5 Catalyst under Supercritical Conditions. Industrial & Engineering Chemistry Research, 48 (17), pp. 7899-7909.

Wang, L., Zhang, R., Eisenthal, R. and Hubble, J., 2006. An intrinsically shielded hydrogel for the adsorptive recovery of lysozyme. Biotechnology and Applied Biochemistry, 45 (1), pp. 37-42.

Wanga, J., Chigada, P. I., Rigby, S. P., Al-Duri, B. and Wood, J., 2009. Prolonging catalyst lifetime in supercritical isomerization of 1-hexene over a platinum/alumina catalyst. Chemical Engineering Science, 64 (15), pp. 3427-3436.

Watt-Smith, M. J., Friedrich, J. M., Rigby, S., Ralph, T. R. and Walsh, F. C., 2008. Determination of the electrochemically active surface area of Pt/C PEM fuel cell electrodes using different adsorbates. Journal of Physics D: Applied Physics, 41 (17), 174004.

Watt-Smith, M. J., Rigby, S., Ralph, T. R. and Walsh, F. C., 2008. Characterisation of porous carbon electrode materials used in proton exchange membrane fuel cells via gas adsorption. Journal of Power Sources, 184 (1), pp. 29-37.

Watt-Smith, M. J., Kolaczkowski, S. T., Rigby, S. P. and Chudek, J. A., 2006. Prediction of gas sorption kinetics for porous media using MRI. AIChE Journal, 52 (9), pp. 3278-3289.

Watt-Smith, M. J., Rigby, S. P., Chudek, J. A. and Fletcher, R. S., 2007. Simulation of mercury porosimetry using MRI images of porous media. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 177-184.

Watt-Smith, M. J., Rigby, S. P., Chudek, J. A. and Fletcher, R. S., 2006. Simulation of Nonwetting Phase Entrapment within Porous Media Using Magnetic Resonance Imaging. Langmuir, 22 (11), pp. 5180-5188.

Watt-Smith, M. J., Edler, K. J. and Rigby, S. P., 2005. An experimental study of gas adsorption on fractal surfaces. Langmuir, 21 (6), pp. 2281-2292.

Weis, A. and Bird, M. R., 2001. The influence of multiple fouling and cleaning cycles upon the membrane processing of lignosulphonates. Food and Bioproducts Processing, 79 (C3), pp. 184-187.

Weis, A., Bird, M. R. and Nystrom, M., 2003. The chemical cleaning of polymeric UF membranes fouled with spent sulphite liquor over multiple operational cycles. Journal of Membrane Science, 216 (1-2), pp. 67-79.

Weller, M. T., Henry, P. F., Ting, V. P. and Wilson, C. C., 2009. Crystallography of hydrogen-containing compounds: realizing the potential of neutron powder diffraction. Chemical Communications, 2009 (21), pp. 2973-2989.

Wenk, J., Aeschbacher, M., Salhi, E., Canonica, S., Von Gunten, U. and Sander, M., 2013. Chemical oxidation of dissolved organic matter by chlorine dioxide, chlorine, and ozone:Effects on its optical and antioxidant properties. Environmental Science and Technology, 47 (19), pp. 11147-11156.

Wenk, J., Aeschbacher, M., Sander, M., Von Gunten, U. and Canonica, S., 2015. Photosensitizing and inhibitory effects of ozonated dissolved organic matter on triplet-induced contaminant transformation. Environmental Science & Technology Item availability may be restricted.

Wenk, J., Eustis, S. N., McNeill, K. and Canonica, S., 2013. Quenching of excited triplet states by dissolved natural organic matter. Environmental Science and Technology, 47 (22), pp. 12802-12810.

Wenk, J., Von Gunten, U. and Canonica, S., 2011. Effect of dissolved organic matter on the transformation of contaminants induced by excited triplet states and the hydroxyl radical. Environmental Science and Technology, 45 (4), pp. 1334-1340.

Wery, N., Gerike, U., Sharman, A., Chaudhuri, J. B., Hough, D. W. and Danson, M. J., 2003. Use of a packed-column bioreactor for isolation of diverse protease-producing bacteria from antarctic soil. Applied and Environmental Microbiology, 69 (3), pp. 1457-1464.

White, V., Torrente Murciano, L., Sturgeon, D. and Chadwick, D., 2010. Purification of oxyfuel-derived CO(2). International Journal of Greenhouse Gas Control, 4 (2), pp. 137-142.

White, V., Torrente-Murciano, L., Sturgeon, D. and Chadwick, D., 2009. Purification of oxyfuel-derived CO2. Energy Procedia, 1 (1), pp. 399-406.

Whittaker, R. J., Booth, R., Dyson, R., Bailey, C., Parsons Chini, L., Naire, S., Payvandi, S., Rong, Z., Woollard, H., Cummings, L. J., Waters, S. L., Mawasse, L., Chaudhuri, J. B., Ellis, M. J., Michael, V., Kuiper, N. J. and Cartmell, S., 2009. Mathematical modelling of fibre-enhanced perfusion inside a tissue-engineering bioreactor. Journal of Theoretical Biology, 256 (4), pp. 533-546.

Willcocks, A. M., Gilbank, A., Richards, S. P., Brayshaw, S. K., Kingsley, A. J., Odedra, R. and Johnson, A. L., 2011. Synthesis and structure of 6-aminofulvene-2-aldiminate complexes. Inorganic Chemistry, 50 (3), pp. 937-948.

Williams, D. P., Shipley, R., Ellis, M. J., Webb, S., Ward, J., Gardner, I. and Creton, S., 2013. Novel in vitro and mathematical models for the prediction of chemical toxicity. Chemical Research in Toxicology, 2 (1), pp. 40-59.

Wills, K. A., Mandujano-ramírez, H. J., Merino, G., Mattia, D., Hewat, T., Robertson, N., Oskam, G., Jones, M. D., Lewis, S. E. and Cameron, P. J., 2013. Investigation of a copper(i) biquinoline complex for application in dye-sensitized solar cells. RSC Advances, 3 (45), pp. 23361-23369.

Wilson, C.C., Henry, P.F., Schmidtmann, M., Ting, V.P., Williams, E. and Weller, M.T., 2014. Neutron powder diffraction : New opportunities in hydrogen location in molecular and materials structure. Crystallography Reviews, 20 (3), pp. 162-206.

Wols, B. A., Hofman, J. A. M. H., Beerendonk, E. F., Uijttewaal, W. S. J. and Van Dijk, J. C., 2011. A systematic approach for the design of UV reactors using computational fluid dynamics. AIChE Journal, 57 (1), pp. 193-207.

Wols, B. A., Hofman, J. A. M. H., Uijttewaal, W. S. J., Rietveld, L. C. and van Dijk, J. C., 2010. Evaluation of different disinfection calculation methods using CFD. Environmental Modelling and Software, 25 (4), pp. 573-582.

Wols, B. A., Shao, L., Uijttewaal, W. S. J., Hofman, J. A. M. H., Rietveld, L. C. and van Dijk, J. C., 2010. Evaluation of experimental techniques to validate numerical computations of the hydraulics inside a UV bench-scale reactor. Chemical Engineering Science, 65 (15), pp. 4491-4502.

Wols, B. A., Uijttewaal, W. S. J., Hofman, J. A. M. H., Rietveld, L. C. and van Dijk, J. C., 2010. The weaknesses of a k-e{open} model compared to a large-eddy simulation for the prediction of UV dose distributions and disinfection. Chemical Engineering Journal, 162 (2), pp. 528-536.

Wols, B. A., Uijttewaal, W. S. J., Rietveld, L. C., Stelling, G. S., Van Dijk, J. C. and Hofman, J. A. M. H., 2008. Residence time distributions in ozone contactors. Ozone-Science & Engineering, 30 (1), pp. 49-57.

Wong, K., 2009. Benzene alkylation with ethane into ethylbenzene over Pt-containing zeolite bifunctional catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Wood, A.J., Fraser, J.D., Swift, S., Patterson-Emanuelson, E. A. C., Amirapu, S. and Douglas, R.G., 2012. Intramucosal bacterial microcolonies exist in chronic rhinosinusitis without inducing a local immune response. American Journal of Rhinology and Allergy, 26 (4), pp. 265-270.

Wright, B., De Bank, P. A., Luetchford, K. A., Acosta, F. R. and Connon, C. J., 2014. Oxidised alginate hydrogels as niche environments for corneal epithelial cells. Journal of Biomedical Materials Research, Part A, 102 (10), pp. 3393-3400.

Wu, C., Leese, H.S., Mattia, D., Dagastine, R.R., Chan, D.Y.C. and Tabor, R.F., 2013. Study of fluid and transport properties of porous anodic aluminum membranes by dynamic atomic force microscopy. Langmuir, 29 (28), pp. 8969-8977.

Wu, D. and Bird, M. R., 2010. The interaction of protein and polyphenol species in ready to drink black tea liquor production. Journal of Food Process Engineering, 33 (3), pp. 481-505.

Wu, P., Brisdon, B. J., England, R. and Field, R. W., 2002. Preparation of modified difunctional PDMS membranes and a comparative evaluation of their performance for the pervaporative recovery of p-cresol from aqueous solution. Journal of Membrane Science, 206 (1-2), pp. 265-275.

Wu, P., Field, R. W., Brisdon, B. J., England, R. and Barkley, S. J., 2001. Optimization of organofunction PDMS membranes for the pervaporative recovery of phenolic compounds from aqueous streams. Separation and Purification Technology, 22 and 23 (1-3), pp. 339-345.

Wu, P., Field, R. W., England, R. and Brisdon, B. J., 2001. A fundamental study of organofunctionalised PDMS membranes for the pervaporative recovery of phenolic compounds from aqueous streams. Journal of Membrane Science, 190 (2), pp. 147-157.

Wung, N., Acott, S. M., Tosh, D. and Ellis, M. J., 2014. Hollow fibre membrane bioreactors for tissue engineering applications. Biotechnology Letters, 36 (12), pp. 2357-2366. Item availability may be restricted.

X

Xia, T. X. and Greaves, M., 2002. 3D physical model studies of downhole catalytic upgrading of Wolf Lake heavy oil using THAI. Journal of Canadian Petroleum Technology, 41 (8), pp. 58-64.

Xia, T. X. and Greaves, M., 2006. In situ upgrading of Athabasca Tar Sand bitumen using THAI. Chemical Engineering Research & Design, 84 (9), pp. 856-864.

Xia, T. X. and Greaves, M., 2002. Upgrading Athabasca tar sand using toe-to-heel air injection. Journal of Canadian Petroleum Technology, 41 (8), pp. 51-57.

Xia, T. X., Greaves, M. and Turta, A., 2003. Paper 2003-030: Main Mechanism for Stability of THAI – “Toe-to-Heel Air Injection”. In: Canadian International Petroleum Conference, 2003-06-10 - 2003-06-12, Calgary Alberta.

Xia, T. X., Greaves, M. and Turta, A. T., 2005. Main mechanism for stability of THAI- toe to heel air injection. Journal of Canadian Petroleum Technology, 44 (1), pp. 42-48.

Xia, T. X., Greaves, M., Turta, A. T. and Ayasse, C., 2003. THAI- a 'short-distance displacement' in situ combustion process for the recovery & upgrading of heavy oils. Chemical Engineering Research & Design, 81 (3), pp. 295-304.

Xia, T. X., Greaves, M., Werfilli, W. S. and Rathbone, R. R., 2002. Paper 2002-027: THAI Process – Effect of Oil Layer Thickness on Heavy Oil Recovery. In: Canadian International Petroleum Conference, 2002-06-11 - 2002-06-13, Calgary, Alberta.

Xia, T. X., Greaves, M., Werfilli, W. S. and Rathbone, R. R., 2002. SPE 78998: Downhole Conversion of Lloydminster Heavy Oil Using THAI-CAPRI Process. In: SPE International Thermal Operations and Heavy Oil Symposium, and International Horizontal Wells Conference, 2002-11-04 - 2002-11-07, Calgary Alberta.

Xia, T., Greaves, M. and Turta, A., 2002. Injection well - Producer well combinations in THAI 'Toe-to-heel air injection'. In: SPE/DOE Thirteenth Symposium on Improved Oil Recovery, 2002-04-13 - 2002-04-17, Tulsa, OK.

Xiao, L. M., Grogan, M. D. W., Leon-Saval, S. G., Williams, R., England, R., Wadsworth, W. J. and Birks, T. A., 2009. Tapered fibers embedded in silica aerogel. Optics Letters, 34 (18), pp. 2724-2726.

Xiao, L., Grogan, M.D.W., Leon-Saval, S.G., Williams, R. J., England, R., Wadsworth, W.J. and Birks, T.A., 2009. Tapered fibres embedded in silica aerogel. In: Conference on Lasers and Electro-Optics, CLEO 2009, 2009-05-31 - 2009-06-05, Baltimore.

Xiao, L., Grogan, M. D. W., England, R., Wadsworth, W. J. and Birks, T. A., 2010. Aerogel package for fused fibre couplers. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Xiao, L., Grogan, M. D. W., England, R., Wadsworth, W. J. and Birks, T. A., 2010. Gas sensing with a sub-micron tapered fibre embedded in hydrophobic aerogel. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Xue, X., Tang, J., Smirnova, A., England, R. and Sammes, N., 2004. System level lumped-parameter dynamic modeling of PEM fuel cell. Journal of Power Sources, 133 (2), pp. 188-204.

Y

Yahaya, G. O., Brisdon, B. J., Maxwell, M. and England, R., 2001. Preparation and properties of functionalized polyorganosiloxanes. Journal of Applied Polymer Science, 82 (4), pp. 808-817.

Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2013. Mitigation of crude oil fouling by turbulence enhancement in a batch stirred cell. Applied Thermal Engineering, 54 (2), pp. 516-520.

Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2012. Effect of turbulence enhancement on crude oil fouling in a batch stirred cell. Chemical Engineering Transactions, 29, pp. 1459-1464.

Yang, M., Young, A., Niyetkaliyev, A. and Crittenden, B., 2012. Modelling fouling induction periods. International Journal of Thermal Sciences, 51, pp. 175-183.

Yarin, A. L., Megaridis, C. M., Mattia, D. and Gogotsi, Y., 2008. Smoothing of nanoscale roughness based on the Kelvin effect. Nanotechnology, 19 (36), 365702.

Ying, C.Y.J., Muir, A.C., Valdivia, C.E., Steigerwald, H., Sones Collin L., C., Eason, R.W., Soergel, E. and Mailis, S., 2012. Light-mediated ferroelectric domain engineering and micro-structuring of lithium niobate crystals. Laser and Photonics Reviews, 6 (4), pp. 526-548.

Young, A., Venditti, S., Berrueco, C., Yang, M., Waters, A., Davies, H., Hill, S., Millan, M. and Crittenden, B. D., 2011. Characterization of crude oils and their fouling deposits using a batch stirred cell system. Heat Transfer Engineering, 32 (3-4), pp. 216-227.

Yu, S., Benzeval, I., Bowyer, A. and Hubble, J., 2009. Preparation of pore-filled responsive membranes using dextran precipitation. Journal of Membrane Science, 339 (1-2), pp. 138-142.

Yu, S., Mays, T. J. and Dunn, R. W., 2011. Long-term hydrogen storage approach for 5MW micro-power generator using wind turbines. In: Bourkas, P., ed. Proceedings of the tenth IASTED European conference on power and energy systems. Anaheim, CA: ACTA Press, pp. 267-273.

Yu, S., Mays, T. J. and Dunn, R. W., 2009. A new methodology for designing hydrogen energy storage in wind power systems to balance generation and demand. In: 1st International Conference on Sustainable Power Generation and Supply, SUPERGEN '09. IEEE Computer Society, pp. 1-6.

Yu, S., Mays, T. J. and Dunn, R. W., 2010. Hydrogen energy storage in isolated microgrids with wind generation. In: 2010 45th International Universities' Power Engineering Conference, UPEC 2010. Piscataway, NJ: IEEE Computer Society.

Z

Zayed, F., Greiner, L., Schulz, P. S., Lapkin, A. and Leitner, W., 2008. Continuous catalytic Friedel-Crafts acylation in the biphasic medium of an ionic liquid and supercritical carbon dioxide. Chemical Communications, 1, pp. 79-81.

Zhang, F., Hayes, R. E. and Kolaczkowski, S. T., 2004. A new technique to measure the effective diffusivity in a catalytic monolith washcoat. Chemical Engineering Research & Design, 82 (A4), pp. 481-489.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2007. A smart membrane based on an antigen-responsive hyrogel. Biotechnology and Bioengineering, 97 (4), pp. 976-984.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2005. Demonstration of an intelligent hydrogel based diffraction grating. Proceedings of SPIE - The International Society for Optical Engineering, 5758 (Smart Sensor Technol), pp. 254-264.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2008. Temperature responsive pore-filled membranes based on a BSA/poly(N-isopropylacrylamide) hydrogel. Advances in Polymer Technology, 27 (1), pp. 27-34.

Zhang, R., Tang, M., Bowyer, A., Eisenthal, R. and Hubble, J., 2006. Synthesis and characterization of a D-glucose sensitive hydrogel based on CM-dextran and concanavalin A. Reactive & Functional Polymers, 66 (7), pp. 757-767.

Zhang, R. S., Tang, M. G., Bowyer, A., Eisenthal, R. and Hubble, J., 2005. A novel pH- and ionic-strength-sensitive carboxy methyl dextran hydrogel. Biomaterials, 26 (22), pp. 4677-4683.

Zhang, R., 2013. Measurement of Effective Diffusivity: Chromatographic Method (Pellets & Monoliths). Thesis (Doctor of Philosophy (PhD)). University of Bath.

Zhao, C., 2013. Structured Catalyst Support Systems. Thesis (Master of Philosophy (MPhil)). University of Bath.

Zhou, Q., Kennedy, B. J., Ting, V. and Withers, R. L., 2005. Thermal expansion and cation disorder in Bi2InNbO7. Journal of Solid State Chemistry, 178 (5), pp. 1575-1579.

Zou, C. W., Rao, Y. F., Alyamani, A., Chu, W., Chen, M. J., Patterson, D. A., Emanuelsson, E. A. C. and Gao, W., 2010. Heterogeneous lollipop-like V2O5/ZnO array: A promising composite nanostructure for visible light photocatalysis. Langmuir, 26 (14), pp. 11615-11620.

Zou, C. W., Yan, X. D., Patterson, D. A., Emanuelsson, E. A. C., Bian, J. M. and Gao, W., 2010. Temperature sensitive crystallization of V2O5: from amorphous film to β-V2O5nanorods. CrystEngComm, 12 (3), pp. 691-693.

This list was generated on Sat Jul 4 21:40:20 2015 IST.