Research

Items from Faculty of Engineering & Design > Chemical Engineering

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level: 856.

Book/s

Chaudhuri, J., Fryer, P. and Editors, [N. V.], 2005. Special Issue: The 7th World Congress of Chemical Engineering: Engineering for Life Incorporating the 5th European Congress held 10-14 July 2005 in Glasgow, England.Vol. 83(C2). Unkown Publisher. (Food Bioprod. Process)

Hargreaves, J. S. J., Lapkin, A. A. and Editors, [N. V.], 2003. Catalyst Life Cycle-Preparation, Activation, Deactivation and Regeneration Meeting. Vol. 81(4). Bath, England: Unkown Publisher. (Catalysis Today)

Book Sections

Arrowsmith, R. L., Pascu, S. I. and Smugowski, H. J., 2012. New developments in the biomedical chemistry of metal complexes : from small molecules to nanotheranostic design. In: Organometallic Chemistry. Cambridge: RSC. (Organometallic Chemistry; 38)

Baxter, F., Turner, I., Bowen, C., Chaudhuri, J. and Gittings, J. P., 2008. The attachment of osteoblast-like cells to hydroxyapatite-barium titanate ceramics. In: 8th World Biomaterials Congress 2008. Vol. 2. , p. 1083.

Birks, T. A., Grogan, M. D. W., Chen, Z., Xiao, L. M., Leon-Saval, S. G., Xiong, C. and England, R., 2009. Modifying photonic crystal fibres. In: 2009 14th Optoelectronics and Communications Conference. New York: IEEE, pp. 96-97.

Birks, T. A., Grogan, M. D. W., Xiao, L. M., Rollings, M. D., England, R. and Wadsworth, W. J., 2010. Silica aerogel in optical fibre devices. In: 12th International Conference on Transparent Optical Networks, ICTON 2010. IEEE.

Crittenden, B. D., 2003. Waste minimization in industry. In: Encyclopedia of Life Support Systems (EOLSS). , p. 16.

De Bank, P., Jones, M. and Ellis, M., 2009. Polymeric scaffolds for regenerative medicine. In: Mattiasson, B., Kumar, A. and Galaev, I. Y., eds. Macroporous Polymers: Production Properties and Biotechnological/Biomedical Applications. CRC Press, pp. 467-495.

Ellis, M.J., 2013. Two- and three-dimensional tissue culture bioprocessing methods for soft tissue engineering. In: Standardisation in Cell and Tissue Engineering: Methods and Protocols. Woodhead Publishing Ltd., pp. 34-53.

Eslava, S., Iacopi, F., Baklanov, M.R., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2007. Ultra-violet-assisted cure of spin-on silicalite-1 films. In: Studies in Surface Science and Catalysis. Vol. 170. , pp. 594-599.

Eslava, S., Urrutia, J., Busawon, A.N., Baklanov, M.R., Iacopi, F., Maex, K., Kirschhock, C.E.A. and Martens, J.A., 2009. Effects of silica sources on nanoporous organosilicate films templated with tetraalkylammonium cations. In: Materials Research Society Symposium Proceedings. Vol. 1156. , pp. 53-58.

Gillard, I. C. and Mays, T. J., 2008. Hydrogen energy in the information age. In: 17th World Hydrogen Energy Conference 2008, WHEC 2008. , pp. 1255-1258.

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2008. Polarisation behaviour of calcium phosphate based ceramics. In: Marques, A. T., Silva, A. F., Baptista, A. P. M., Sá, C., Alves, F. J. L., Malheiros, L. F. and Vieira, M., eds. Advanced Materials Forum IV: Materiais 2007. Zurich: Trans Tech Publications, pp. 91-95.

Grogan, M. D. W., Rollings, M. D., Xiao, L., Wadsworth, W. J., England, R., Maier, S. A. and Birks, T. A., 2010. Plasmonic aerogel doped with gold nanoparticles. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Hitchcock, I., Rigby, S., Chudek, J., Holt, L. and Lowe, J., 2011. MRI and PGSE NMR Studies of Long-range, Pore-pore Interaction Effects in Gas Adsorption. In: Fantazzini, P., Bortolotti, V., Karger, J. and Galvosas, P., eds. Magnetic Resonance in Porous Media. Vol. 1330. , pp. 53-56. (AIP Conference Proceedings)

Holt, E. and Bird, M. R., 2014. Fouling and cleaning of ceramic membranes during the dewatering of gum arabic waste streams. In: Fouling and cleaning in food processing: Green Cleaning 2014. University of Cambridge: .

Hooper, L. E., Mosley, P. J., Muir, A. C., Wadsworth, W. J. and Knight, J. C., 2010. All-normal dispersion photonic crystal fiber for coherent supercontinuum generation. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. Washington DC: OSA.

Hooper, L. E., Mosley, P. J., Muir, A. C., Yu, F., Mangan, B. J., Wadsworth, W. J., Knight, J. C. and Dudley, J. M., 2011. Coherent widely tunable source of sub-picosecond pulses using all-normal dispersion fiber supercontinuum. In: 2011 7th International Workshop on Fibre and Optical Passive Components, WFOPC2011. Piscataway, NJ: IEEE.

Kolaczkowski, S. T., 2003. Catalytic combustion: making the connection between the physical/chemical processes and the mathematical model of the reactor. In: Movchan, A. B., ed. IUTAM Symposium on Asymptotics, Singularities and Homogenisation in Problems of Mechanics. (Solid Mechanics and its Applications ). Vol. 113. , pp. 557-568.

Kolaczkowski, S., Le, C. D. and Awdry, S., 2011. Equilibrium reaction(s) involving H2S and COS species: consideration of thermodynamics and implications on the biomass gasification process. In: Bridgwater, A. V., ed. Proceedings of the bioten conference on biomass, bioenergy and biofuels 2010. Newbury: CPL Press, pp. 733-744.

Kolaczkowski, S., Le, C. D. and Jodlowski, P., 2011. Gasification of wood pellets in an experimental quartz tube gasifier: How visual 1D experiments can aid 3D design considerations. In: Bridgwater, A. V., ed. Proceedings of the bioten conference on biomass, bioenergy and biofuels 2010. Newbury: CPL Press, pp. 720-732.

Lapkin, A. A., 2006. Sustainability performance indicators. In: Dewulf, J. and van Langenhove, I. H., eds. Renewables-Based Technology: Sustainability Assessment. John Wiley & Sons, pp. 39-53.

Leese, H. and Mattia, D., 2013. Wetting in carbon inorganic and organic nanotubes and nanochannels. In: Ondarcuhu, T. and Aime, J.-P., eds. Nanoscale Liquid Interfaces: Wetting, Patterning and Force Microscopy at the Molecular Scale. Pan Stanford Publishing, pp. 361-402.

Mattia, D., 2010. Wetting phenomena inside carbon nanotubes. In: Starov, V. M., ed. Nanoscience: Colloidal and Interfacial Aspects. CRC Press. (Surfactant Science)

McEnaney, B., Alain, E., Yin, Y. F. and Mays, T. J., 2001. Porous carbons for gas storage and separation: characterisation and performance. In: Rand, B., Appleyard, S. P. and Yardim, M. F., eds. Design and Control of Structure of Advanced Carbon Materials for Enhanced Performance. Vol. 374. Springer, pp. 295-318. (NATO Science Series E: Applied Sciences)

Nuckols, M.L., Kolaczkowski, S.T., Awdry, S., Le, C., Smith, T. and Thomas, D., 2013. An alternative method to remove carbon dioxide from submersible environments. In: Underwater Intervention Conference 2012 (UI2012). Curran Associates, pp. 316-324.

Patterson, D., Davey, C. and Rohani, R., 2014. Forthcoming. Membrane Separations : From Purifications, Minimisation, Reuse and Recycling to Process Intensification. In: Letcher, T., Scott, J. and Patterson, D., eds. Chemical Processes for a Sustainable Future. Royal Society of Chemistry, p. 469.

Rigby, S. P., 2007. A Unified Model for the Effects of Surface Heterogeneity on Gas Absorption and Surface Diffusion on Silica Surfaces. In: Fong, P. A., ed. Colloid and Surface Research Trends. Nova Science, pp. 147-167.

Rigby, S. P., 2002. Structural models for the interpretation of gas-solid adsorption and mercury porosimetry data. In: Hubbard, A., ed. Encyclopedia of Surface and Colloid Science. New York: Marcel Dekker, pp. 4825-4852.

Rollings, M. D., Grogan, M. D. W., Xiao, L. M., England, R., Birks, T. A. and Wadsworth, W. J., 2010. Supercontinuum generation in tapered fibres embedded in silica aerogel. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Rossi, M., Sharma, R., Pawelski, E. and Moghe, P., 2009. Nanoparticles as biodynamic substrates for engineering cell fate. In: Rege, K. and Medintz, I., eds. Methods in Bioengineering: Nanoscale Bioengineering and Nanomedicine. Boston, MA.: Artech House, pp. 85-106.

Shamiryan, D., Paraschiv, V., Eslava, S., Demand, M., Baklanov, M. and Boullart, W., 2006. BCl/N plasma for advanced non-Si gate patterning. In: Materials Research Society Symposium Proceedings. Vol. 913. , pp. 105-110.

Shearer, C., Velleman, L., Acosta, F., Ellis, A., Voelcker, N., Mattia, D. and Shapter, J., 2010. Water transport through nanoporous materials: Porous silicon and single walled carbon nanotubes. In: ICONN 2010 - Proceedings of the 2010 International Conference on Nanoscience and Nanotechnology. Piscataway, NJ: IEEE Computer Society, pp. 196-199.

Wadsworth, W. J., Grogan, M. D. W., Xiao, L. M., Rollings, M. D., England, R. and Birks, T. A., 2011. Aerogel-enhanced tapers and fibres. In: 2011 IEEE Winter Topicals, WTM 2011. Piscataway, NJ: IEEE Computer Society, pp. 193-194.

Wu, X., Chaudhuri, J.B., Ellis, M. J., Jones, M.D. and Davidson, M.G., 2008. Precision fabricated stereoisomeric and stereoregular pla/plga for tissue engineering scaffolds. In: 8th World Biomaterials Congress 2008. Vol. 2. , p. 1020.

Wu, X., Jones, M.D., Chaudhuri, J.B., Davidson, M.G. and Ellis, M. J., 2008. Fabrication of porous PLGA scaffolds with different methods and their applications for tissue engineering. In: 8th World Biomaterials Congress 2008. Vol. 2. , p. 1021.

Xiao, L., Grogan, M. D. W., England, R., Wadsworth, W. J. and Birks, T. A., 2010. Aerogel package for fused fibre couplers. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Xiao, L., Grogan, M. D. W., England, R., Wadsworth, W. J. and Birks, T. A., 2010. Gas sensing with a sub-micron tapered fibre embedded in hydrophobic aerogel. In: Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference: 2010 Laser Science to Photonic Applications, CLEO/QELS 2010. New York: Association for Computing Machinery (ACM).

Yu, S., Mays, T. J. and Dunn, R. W., 2011. Long-term hydrogen storage approach for 5MW micro-power generator using wind turbines. In: Bourkas, P., ed. Proceedings of the tenth IASTED European conference on power and energy systems. Anaheim, CA: ACTA Press, pp. 267-273.

Yu, S., Mays, T. J. and Dunn, R. W., 2009. A new methodology for designing hydrogen energy storage in wind power systems to balance generation and demand. In: 1st International Conference on Sustainable Power Generation and Supply, SUPERGEN '09. IEEE Computer Society, pp. 1-6.

Yu, S., Mays, T. J. and Dunn, R. W., 2010. Hydrogen energy storage in isolated microgrids with wind generation. In: 2010 45th International Universities' Power Engineering Conference, UPEC 2010. Piscataway, NJ: IEEE Computer Society.

Articles

Aarvold, A., Smith, J. O., Tayton, E. R., Lanham, S. A., Chaudhuri, J. B., Turner, I. G. and Oreffo, R. O.C., 2013. The effect of porosity of a biphasic ceramic scaffold on human skeletal stem cell growth and differentiation in vivo. Journal of Biomedical Materials Research - Part A, 101 (12), pp. 3431-3437.

Abdul-Wahab, S., Bouhamra, W., Ettouney, H., Sowerby, B. and Crittenden, B. D., 2000. Analysis of air pollution at Shuaiba Industrial Area in Kuwait. Toxicological and Environmental Chemistry, 78 (3-4), pp. 213-232.

Abdul-Wahab, S. A., Azzi, M., Johnson, G. M., Bouhamra, W. S., Ettouney, H. M., Sowerby, B. and Crittenden, B. D., 2002. Use of an integrated empirical rate model in analysis of ozone photochemistry in industrial areas - A case study. Process Safety and Environmental Protection, 80 (4), pp. 211-219.

Abdul-Wahab, S. A., Azzi, M., Johnson, G. M., Bouhamra, W. S., Ettouney, H. M., Sowerby, B. and Crittenden, B. D., 2003. Using the integrated empirical rate-reactive plume model in assessment of the potential effects of Shuaiba Industrial Area NOx plumes on photochemical smog concentrations. Process Safety and Environmental Protection, 81 (B5), pp. 363-374.

Abeynaike, A., Wang, L., Jones, M. I. and Patterson, D. A., 2011. Pyrolysed powdered mussel shells for eutrophication control: effect of particle size and powder concentration on the mechanism and extent of phosphate removal. Asia-Pacific Journal of Chemical Engineering, 6 (2), pp. 231-243.

Acott, S. M., Parsons, T. M., Nevell, J. M. and Perera, S. P., 2011. PVDF/CB composites prepared by novel solvent casting method for low voltage PTC temperature regulation applications. Journal of Applied Polymer Science, 120 (6), pp. 3673-3678.

Adamaki, V., Clemens, F., Taylor, J., Mays, T.J. and Bowen, C.R., 2014. Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis. Journal of Materials Science, 49 (21), pp. 7597-7603.

Agueda, V. I., Crittenden, B. D., Delgado, J. A. and Tennison, S. R., 2011. Effect of channel geometry, degree of activation, relative humidity and temperature on the performance of binderless activated carbon monoliths in the removal of dichloromethane from air. Separation and Purification Technology, 78 (2), pp. 154-163.

Ainsworth, B. J. and Chaudhuri, J. B., 2006. Development of fibrous porous silk scaffolds. European Cells and Materials, 11 (Supplement 3), p. 4.

Al Badran, F., Awdry, S. and Kolaczkowski, S.T., 2013. Development of a continuous flow reactor for pharmaceuticals using catalytic monoliths : Pt/C selective oxidation of benzyl alcohol. Catalysis Today, 216, pp. 229-239.

Al-Honi, M., Greaves, M. and Zekri, A. Y., 2002. Enhanced recovery of medium crude oil in heterogeneous reservoirs using air injection/in situ combustion - Horizontal well technology. Petroleum Science and Technology, 20 (5-6), pp. 655-669.

Al-Redhwan, S. A., Crittenden, B. D. and Lababidi, H. M. S., 2005. Wastewater minimization under uncertain operational conditions. Computers and Chemical Engineering, 29 (5), pp. 1009-1021.

Ali, A., Chapman, G.J., Chew, Y.M.J., Gu, T., Paterson, W.R. and Wilson, D.I., 2013. A fluid dynamic gauging device for measuring fouling deposit thickness in opaque liquids at elevated temperature and pressure. Experimental Thermal and Fluid Science, 48, pp. 19-28.

Ali, A. M., Emanuelsson, E. A. C. and Patterson, D. A., 2011. Conventional versus lattice photocatalysed reactions: Implications of the lattice oxygen participation in the liquid phase photocatalytic oxidation with nanostructured ZnO thin films on reaction products and mechanism at both 254nm and 340nm. Applied Catalysis B: Environmental, 106 (3-4), pp. 323-336.

Ali, A. M., Emanuelsson, E. A. C. and Patterson, D. A., 2010. Photocatalysis with nanostructured zinc oxide thin films: the relationship between morphology and photocatalytic activity under oxygen limited and oxygen rich conditions and evidence for a Mars Van Krevelen mechanism. Applied Catalysis B: Environmental, 97 (1-2), pp. 168-181.

Allen, C. L., Lapkin, A. A. and Williams, J. M. J., 2009. An iron-catalysed synthesis of amides from nitriles and amines. Tetrahedron Letters, 50 (29), pp. 4262-4264.

Alvarez, P. M., Jaramillo, J., Lopez-Pinero, F. and Plucinski, P. K., 2010. Preparation and characterization of magnetic TiO2 nanoparticles and their utilization for the degradation of emerging pollutants in water. Applied Catalysis B: Environmental, 100 (1-2), pp. 338-345.

Alvarez, P. M., McLurgh, D. and Plucinski, P., 2002. Copper Oxide Mounted on Activated Carbon as Catalyst for Wet Air Oxidation of Aqueous Phenol. 1. Kinetic and Mechanistic Approaches. Industrial & Engineering Chemistry Research, 41 (9), pp. 2147-2152.

Alvarez, P. M., McLurgh, D. and Plucinski, P., 2002. Copper Oxide Mounted on Activated Carbon as Catalyst for Wet Air Oxidation of Aqueous Phenol. 2. Catalyst Stability. Industrial & Engineering Chemistry Research, 41 (9), pp. 2153-2158.

Alves, D., Gaudion, A., Bean, J., Pérez Esteban, P., Arnot, T. C., Harper, D. R., Kot, W., Hansen, L. H., Enright, M. C. and Jenkins, A. T. A., 2014. Combined use of bacteriophage K and a novel bacteriophage to reduce Staphylococcus aureus biofilm. Applied and Environmental Microbiology, 80 (21), pp. 6694-6703.

An, J. D., Patterson, D. A., McNeil, S. and Hossain, M. M., 2014. Forthcoming. Immobilization of lipase on woolen fabrics : enhanced effectiveness in stain removal. Biotechnology Progress

Argyle, I. .S. and Bird, M. R., 2014. Forthcoming. Microfiltration of high concentration black tea streams for haze removal using polymeric membranes. Desalination and Water Treatment

Argyle, I. S., Pihlajamaki, A. and Bird, M. R., 2014. Forthcoming. Ultrafiltration of black tea using diafiltration to recovery valuable components. Desalination and Water Treatment

Armini, S., Whelan, C.M., Smet, M., Eslava, S. and Maex, K., 2006. Size shrinkage of methacrylate-based terpolymer latexes synthesized by free radical polymerization : Kinetics and influence of main reaction parameters. European Polymer Journal, 38 (8), pp. 786-798.

Arnot, T. C., Scott, J. A., Howell, J. A. and Liu, W., 2001. Extraction-membrane bio-reactor for treating priority pollutants in the presence of inorganics. Membrane Technology, 2001 (133), pp. 4-7.

Arnot, T., Field, R. W. and Kolutniewicz, A. B., 2000. Cross–flow and dead–end microfiltration of oily–water emulsion. Part II: Mechanisms and modelling of flux decline. Journal of Membrane Science, 169 (1), pp. 1-15.

Arnot, T. and Zahir, N., 1996. Membrane bioreactors as an alternative to conventional waste water treatment processes. Resource and Environmental Biotechnology, 1 (2), pp. 145-162.

Arsenyeva, O. P., Crittenden, B., Yang, M. and Kapustenko, P. O., 2013. Accounting for the thermal resistance of cooling water fouling in plate heat exchangers. Applied Thermal Engineering, 61 (1), pp. 53-59.

Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2006. Computational fluid dynamics for the prediction of temperature profiles and hygienic design in the food industry. Food and Bioproducts Processing, 84 (C2), pp. 157-163.

Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2009. Exploring CFD Solutions for Coexisting Flow Regimes in a T-Piece. Chemical Engineering & Technology, 32 (6), pp. 948-955.

Asteriadou, K., Hasting, A. P. M., Bird, M. R. and Melrose, J., 2010. Modeling heat exchanger performance for non-Newtonian fluids. Journal of Food Process Engineering, 33 (6), pp. 1010-1035.

Asteriadou, K., Hasting, T., Bird, M. and Melrose, J., 2007. Predicting cleaning of equipment using computational fluid dynamics. Journal of Food Process Engineering, 30 (1), pp. 88-105.

Augustin, W., Chew, Y. M. J., Gordon, P. W., Lister, V. Y., Mayer, M., Paterson, B. R., Peralta, J. M., Scholl, S. and Wilson, D. I., 2012. Dynamic Gauging of Soft Fouling Layers on Solid and Porous Surfaces. Chemie Ingenieur Technik, 84 (1-2), pp. 46-53.

Awdry, S. and Kolaczkowski, S. T., 2001. The condensation/polymerisation of dimethyl siloxane fluids in a three-phase trickle flow monolith reactor. Catalysis Today, 69 (1-4), pp. 275-281.

Ayres, J. G., Boyd, R., Cowie, H. and Hurley, J. F., 2011. Costs of occupational asthma in the UK. Thorax, 66 (2), pp. 128-133.

Bannister, C. D., Chuck, C. J., Hawley, J. G., Price, P. and Chrysafi, S. S., 2010. Factors affecting the decomposition of biodiesel under simulated engine sump oil conditions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224 (7), pp. 927-940.

Bannister, C. D., Chuck, C. J., Bounds, M. and Hawley, J. G., 2011. Oxidative stability of biodiesel fuel. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (D1), pp. 99-114.

Bannister, C. D., Hawley, J. G., Ali, H. M., Chuck, C. J., Price, P., Chrysafi, S. S., Brown, A. and Pickford, W., 2010. The impact of biodiesel blend ratio on vehicle performance and emissions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224 (3), pp. 405-421.

Barata-Rodrigues, P. M., Mays, T. J. and Moggridge, G. D., 2003. Structured carbon adsorbents from clay, zeolite and mesoporous aluminosilicate templates. Carbon, 41 (12), pp. 2231-2246.

Barata-Rodrigues, P. M., Mays, T. J., Seaton, N. A. and Moggridge, G. D., 2002. Comparison of porous carbons developed via templating approaches. Studies in Surface Science and Catalysis, 144 (Characterization of ), pp. 139-146.

Barg, S., Perez, F.M., Ni, N., Do Vale Pereira, P., Maher, R.C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C. and Saiz, E., 2014. Mesoscale assembly of chemically modified graphene into complex cellular networks. Nature Communications, 5, 4328.

Barkley, S., Johnson, H., Eisenthal, R. and Hubble, J., 2004. Bubble-induced detachment of affinity-adsorbed erythrocytes. Biotechnology and Applied Biochemistry, 40 (2), pp. 145-149.

Bartalena, G., Grieder, R., Sharma, R. I., Zambelli, T., Muff, R. and Snedeker, J. G., 2011. A novel method for assessing adherent single-cell stiffness in tension : Design and testing of a substrate-based live cell functional imaging device. Biomedical Microdevices, 13 (2), pp. 291-301.

Batas, B. and Chaudhuri, J. B., 2001. The influence of operational parameters on lysozyme refolding using size-exclusion chromatography. Bioprocess and Biosystems Engineering, 24 (4), pp. 255-259.

Bavykin, D. V., Milsom, E. V., Marken, F., Kim, D. H., Marsh, D. H., Riley, D. J., Walsh, F. C., El-Abiary, K. H. and Lapkin, A. A., 2005. A novel cation-binding TiO2 nanotube substrate for electro- and bioelectrocatalysis. Electrochemistry Communications, 7 (10), pp. 1050-1058.

Bavykin, D., Lapkin, A., Kolaczkowski, S. and Plucinski, P., 2005. Selective oxidation of alcohols in a continuous multifunctional reactor: ruthenium oxide catalysed oxidation of benzyl alcohol. Applied Catalysis, 288, pp. 175-184.

Bavykin, D., Lapkin, A., Plucinski, P., Friedrich, J. and Walsh, F., 2005. Intercalation of Molecular Hydrogen into the Walls of Multilayered TiO2 nanotubes. Journal of Physical Chemistry B, 109, pp. 19422-19427.

Bavykin, D., Lapkin, A., Plucinski, P., Friedrich, J. and Walsh, F., 2005. TiO2 nanotube supported ruthenium (III) hydrated oxide: A highly active catalyst for selective oxidation of alcohols with oxygen. Journal of Catalysis, 235, pp. 10-17.

Bavykin, D., Lapkin, A., Plucinski, P., Torrente-Murciano, L., Friedrich, J. and Walsh, F., 2006. Deposition of Pt, Pd, Ru and Au into the pores of TiO2 nanotubes. Topics in Catalysis, 39, pp. 151-160.

Bavykin, D. V., Friedrich, J. M., Lapkin, A. A. and Walsh, F. C., 2006. Stability of Aqueous Suspensions of Titanate Nanotubes. Chemistry of Materials, 18 (5), pp. 1124-1129.

Bavykin, D. V., Gordeev, S. N., Moskalenko, A. V., Lapkin, A. A. and Walsh, F. C., 2005. Apparent Two-Dimensional Behavior of TiO2 Nanotubes Revealed by Light Absorption and Luminescence. Journal of Physical Chemistry B, 109 (18), pp. 8565-8569.

Bavykin, D. V., Lapkin, A. A., Friedrich, J. M. and Walsh, F. C., 2005. Acid transformation of TiO2 nanotubes to nanoparticles. NSTI Nanotech 2005, NSTI Nanotechnology Conference & Trade Show, 2, pp. 655-658.

Bavykin, D. V., Lapkin, A. A., Plucinski, P. K., Friedrich, J. M. and Walsh, F. C., 2005. Reversible Storage of Molecular Hydrogen by Sorption into Multilayered TiO2 Nanotubes. Journal of Physical Chemistry B, 109 (41), pp. 19422-19427.

Bavykin, D. V., Lapkin, A. A., Plucinski, P. K., Torrente Murciano, L., Friedrich, J. M. and Walsh, F. C., 2006. Deposition of Pt, Pd, Ru and Au on the surfaces of titanate nanotubes. Topics in Catalysis, 39 (3-4), pp. 151-160.

Bavykin, D. V., Parmon, V. N., Lapkin, A. A. and Walsh, F. C., 2004. The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes. Journal of Materials Chemistry, 14 (22), pp. 3370-3377.

Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J. P., Chaudhuri, J. B. and Lewis, R. W. C., 2008. The structure and properties of electroceramics for bone graft substitution. Key Engineering Materials, 361-363 I, pp. 99-102.

Baxter, F., Turner, I. G., Bowen, C. R., Gittings, J. P. and Chaudhuri, J. B., 2009. An in vitro study of electrically active hydroxyapatite-barium titanate ceramics using Saos-2 cells. Journal of Materials Science: Materials in Medicine, 20 (8), pp. 1697-1708.

Behler, K., Havel, M., Mattia, D. and Gogotsi, Y., 2008. Self-assembled Multi-walled Carbon Nanotube Coatings In Nanotubes and Related Nanostructures. Materials Research Society Symposium Proceedings, 1057E, pp. 1057-1120.

Bekou, S. and Mattia, D., 2011. Wetting of nanotubes. Current Opinion in Colloid and Interface Science, 16 (4), pp. 259-265.

Bennett, C. A. and Crittenden, B. D., 2008. ACSAICHE 99128 Isokinetic phenomena in crude oil fouling. Abstracts of Papers of the American Chemical Society, 235.

Benzeval, I., Bowen, C. R., Guy, R. H. and Delgado-Charro, M. B., 2013. Effects of iontophoresis, hydration, and permeation enhancers on human nail plate: Infrared and impedance spectroscopy assessment. Pharmaceutical Research, 30 (6), pp. 1652-1662.

Benzeval, I., Bowyer, A. and Hubble, J., 2012. The influence of degree-of-branching and molecular mass on the interaction between dextran and Concanavalin A in hydrogel preparations intended for insulin release. European Journal of Pharmaceutics and Biopharmaceutics, 80 (1), pp. 143-148.

Bhalla, N., Di Lorenzo, M., Pula, G. and Estrela, P., 2014. Protein phosphorylation analysis based on proton release detection : potential tools for drug discovery. Biosensors and Bioelectronics, 54, pp. 109-114.

Bhardwaj, B., Perera, S. P. and Crittenden, B. D., 2000. Hybrid membrane adsorbents for fluidized bed separations. Chemical Engineering Research & Design, 78 (A8), pp. 1089-1097.

Bimbo, N. M., Sharpe, J. E., Ting, V. P., Noguera-Díaz, A. and Mays, T. J., 2014. Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures. Adsorption, 20 (2-3), pp. 373-384.

Bimbo, N., Ting, V., Sharpe, J. and Mays, T., 2013. Analysis of optimal conditions for adsorptive hydrogen storage in microporous solids. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 437, pp. 113-119.

Bimbo, N., Ting, V. P., Hruzewicz-Kolodziejczyk, A. and Mays, T. J., 2011. Analysis of hydrogen storage in nanoporous materials for low carbon energy applications. Faraday Discussions, 151, pp. 59-74.

Bird, M. R. and Bartlett, M., 2002. Measuring and modelling flux recovery during the chemical cleaning of MF membranes for the processing of whey protein concentrate. Journal of Food Engineering, 53 (2), pp. 143-152.

Bishopp, S. D., Scott, J. L. and Torrente Murciano, L., 2014. Insights into biphasic oxidations with hydrogen peroxide; towards scaling up. Green Chemistry, 16 (6), pp. 3281-3285.

Bodamyali, T., Jarman-Smith, M., Stevens, C. and Chaudhuri, J., 2002. A novel method for quantifying cell migration through tissue engineering scaffolds: evaluation of modified collagen matrices. Biotechnology Letters, 24 (18), pp. 1491-1497.

Boiarkina, I., Norris, S. and Patterson, D., 2013. The case for the photocatalytic spinning disc reactor as a process intensification technology : Comparison to an annular reactor for the degradation of methylene blue. Chemical Engineering Journal, 225, pp. 752-765.

Boiarkina, I., Pedron, S. and Patterson, D. A., 2011. An experimental and modelling investigation of the effect of the flow regime on the photocatalytic degradation of methylene blue on a thin film coated ultraviolet irradiated spinning disc reactor. Applied Catalysis B: Environmental, 110 (2), pp. 14-24.

Boiarkine, I., Norris, S. and Patterson, D., 2013. Investigation of the effect of flow structure on the photocatalytic degradation of methylene blue and dehydroabietic acid in a spinning disc reactor. Chemical Engineering Journal, 222, pp. 159-171.

Boix, M., Eslava, S., Machado, G., Saiz, E. and De Coninck, J., 2013. Fibrinogen and albumin adsorption on sol-gel calcium phosphate substrates measured by FTIR-ATR. European Cells and Materials, 26 (SUPPL.6), p. 112.

Bowen, C. R., Gittings, J., Turner, I. G., Baxter, F. and Chaudhuri, J. B., 2006. Dielectric and piezoelectric properties of hydroxyapatite-BaTiO3 composites. Applied Physics Letters, 89 (13).

Brinkmann, T., Perera, S. P. and Thomas, W. J., 2001. An experimental and theoretical investigation of a catalytic membrane reactor for the oxidative dehydrogenation of methanol. Chemical Engineering Science, 56 (6), pp. 2047-2061.

Brustlein, S., Berto, P., Hostein, R., Ferrand, P., Billaudeau, C., Marguet, D., Muir, A., Knight, J. and Rigneault, H., 2011. Double-clad hollow core photonic crystal fiber for coherent Raman endoscope. Optics Express, 19 (13), pp. 12562-12568.

Bullen, R. A., Arnot, T. C., Lakeman, J. B. and Walsh, F. C., 2006. Biofuel cells and their development. Biosensors and Bioelectronics, 21 (11), pp. 2015-2045.

Burrows, A. D., Cassar, K., Düren, T., Friend, R. M. W., Mahon, M. F., Rigby, S. P. and Savarese, T. L., 2008. Syntheses, structures and properties of cadmium benzenedicarboxylate metal–organic frameworks. Dalton Transactions, 18, pp. 2465-2474.

Burrows, A. D., Cassar, K., Friend, R. M. W., Mahon, M. F., Rigby, S. P. and Warren, J. E., 2005. Solvent hydrolysis and templating effects in the synthesis of metal-organic frameworks. CrystEngComm, 7, pp. 548-550.

Burrows, A. D., Fisher, L. C., Hodgson, D., Mahon, M. F., Cessford, N. F., Duren, T., Richardson, C. and Rigby, S. P., 2012. The synthesis, structures and reactions of zinc and cobalt metal-organic frameworks incorporating an alkyne-based dicarboxylate linker. CrystEngComm, 14 (1), pp. 188-192.

Burrows, A. D., Fisher, L. C., Richardson, C. and Rigby, S. P., 2011. Selective incorporation of functional dicarboxylates into zinc metal-organic frameworks. Chemical Communications, 47 (12), pp. 3380-3382.

Calabrò, F., Lee, K.P. and Mattia, D., 2013. Modelling flow enhancement in nanochannels : Viscosity and slippage. Applied Mathematics Letters, 26 (10), pp. 991-994.

Camus, O., Perera, S., Crittenden, B., van Delft, Y. C., Meyer, D. F., Pex, P., Kumakiri, I., Miachon, S., Dalmon, J. A., Tennison, S. and Chanaud, P., 2006. Ceramic membranes for ammonia recovery. AIChE Journal, 52 (6), pp. 2055-2065.

Cao, X., Eisenthal, R. and Hubble, J., 2002. Detachment strategies for affinity-adsorbed cells. Enzyme Microbial Technology, 31 (1-2), pp. 153-160.

Charalambous, M., Cowley, M., Geoghegan, F., Smith, F. M., Radford, E. J., Marlow, B. P., Graham, C. F., Hurst, L. D. and Ward, A., 2010. Maternally-inherited Grb10 reduces placental size and efficiency. Developmental Biology, 337 (1), pp. 1-8.

Chaudhuri, J. B., Davidson, M. G., Ellis, M. J., Jones, M. D. and Wu, X. J., 2008. Fabrication of Honeycomb-Structured Poly(DL-lactide) and Poly[(DL-lactide)-co-glycolide)] Films and their Use as Scaffolds for Osteoblast-Like Cell Culture. Macromolecular Symposia, 272 (1), pp. 52-57.

Chaudhuri, J., Fahey, E. M. and Binding, P., 2001. Refolding & Purification Of A Ukrinase Plasminogen Activator Fragment By Chromotography. Journal of Chromatography B - Analytical Technologies in the Biomedical and Life Sciences, 737, pp. 225-235.

Chaudhuri, J., Fahey, E. M. and Binding, P., 2000. Refolding Of Low Molecular Weight Urkinase Plasminoen Activator By Dilution & Size Exclusion Chromatography - A Comparative Study. Separation Science and Technology, 35 (11), 1743 - 1760.

Chaudhuri, J., Sakhamuru, K. and Hough, D. W., 2001. Protein Purification By Ultra Filtration Using a B-Galactosidase Fusion Tag. Biotechnology Progress, 16 (2), pp. 296-298.

Chaudhuri, J. B., Davey, J. and Price, G. J., 2004. A grafting approach to preparing new biocompatible polymer materials with potential as tissue engineering scaffolds. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry), 45 (1), pp. 814-815.

Chaudhuri, J. B. and Fahey, E., 2001. Use of size-exclusion chromatography for refolding recombinant proteins from inclusion bodies. Abstracts of Papers, 221st ACS National Meeting, San Diego, CA, United States, April 1-5, 2001

Chen, H., Yang, W., He, Y., Ding, Y., Zhang, L., Tan, C., Lapkin, A. A. and Bavykin, D. V., 2008. Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids). Powder Technology, 183 (1), pp. 63-72.

Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2007. Fluid dynamic gauging: A new tool to study deposition on porous surfaces. Journal of Membrane Science, 296 (1-2), pp. 29-41.

Chigada, P. I. and Mann, R., 2008. A Network-of-Voids Model to Assess Wall Flow Patterns and Heat Transfer for Low Aspect Ratio Packed-Bed Reactors. International Journal of Chemical Reactor Engineering, 6, A84.

Chigada, P. I., Wang, J., Al-Duri, B., Wood, J. and Rigby, S. P., 2010. Modelling of pore structure evolution during catalyst deactivation and comparison with experiment. Chemical Engineering Science, 65 (20), pp. 5550-5558.

Chmura, A. J., Chuck, C. J., Davidson, M. G., Jones, M. D., Lunn, M. D., Bull, S. D. and Mahon, M. F., 2007. A germanium alkoxide supported by a C-3-symmetric ligand for the stereoselective synthesis of highly heterotactic polylactide under solvent-free conditions. Angewandte Chemie-International Edition, 46 (13), pp. 2280-2283.

Chua, H. C., Arnot, T. C. and Howell, J. A., 2002. Controlling fouling in membrane bioreactors operated with a variable throughput. Desalination, 149 (1-3), pp. 225-229.

Chua, L. M., Hitchcock, I., Fletcher, R. S., Holt, E. M., Lowe, J. and Rigby, S. P., 2012. Understanding the spatial distribution of coke deposition within bimodal micro-/mesoporous catalysts using a novel sorption method in combination with pulsed-gradient spin-echo NMR. Journal of Catalysis, 286, pp. 260-265.

Chua, L. M., Vazhnova, T., Mays, T. J., Lukyanov, D. B. and Rigby, S. P., 2010. Deactivation of PtH-MFI bifunctional catalysts by coke formation during benzene alkylation with ethane. Journal of Catalysis, 271 (2), pp. 401-412.

Chuck, C. and Donnelly, J., 2014. The compatibility of potential bioderived fuels with Jet A-1 aviation kerosene. Applied Energy, 118, pp. 83-91.

Chuck, C., Lou-Hing, D., Dean, R., Sargeant, L., Scott, R. J. and Jenkins, R., 2014. Simultaneous microwave extraction and synthesis of fatty acid methyl ester from the oleaginous yeast Rhodotorula glutinis. Energy, 69, pp. 446-454.

Chuck, C., Santomauro, F., Sargeant, L., Whiffin, F., Chantasuban, T., Abd. Ghaffar, N. R., Wagner, J. and Scott, R. J., 2014. Liquid transport fuels from microbial yeasts - current and future perspectives. Biofuels, 5 (3), pp. 293-311.

Chuck, C. J., Davidson, M. G., Jones, M. D., Kociok-Kohn, G., Lunn, M. D. and Wu, S., 2006. Air-stable titanium alkoxide based metal-organic framework as an initiator for ring-opening polymerization of cyclic esters. Inorganic Chemistry, 45 (17), pp. 6595-6597.

Chuck, C. J., Parker, H. J., Jenkins, R. W. and Donnelly, J., 2013. Renewable biofuel additives from the ozonolysis of lignin. Bioresource Technology, 143, pp. 549-554.

Chuck, C. J., Bannister, C. D., Jenkins, R. W., Lowe, J. P. and Davidson, M. G., 2012. A comparison of analytical techniques and the products formed during the decomposition of biodiesel under accelerated conditions. Fuel, 96, pp. 426-433.

Chuck, C. J., Bannister, C. D., Hawley, J. G. and Davidson, M. G., 2010. Spectroscopic sensor techniques applicable to real-time biodiesel determination. Fuel, 89 (2), pp. 457-461.

Chuck, C. J., Bannister, C. D., Hawley, J. G., Davidson, M. G., La Bruna, I. and Paine, A., 2009. Predictive model to assess the molecular structure of biodiesel fuel. Energy & Fuels, 23 (4), pp. 2290-2294.

Chuck, C. J., Davidson, M. G., Gobius Du Sart, G., Ivanova-Mitseva, P. K., Kociok-Köhn, G. I. and Manton, L. B., 2013. Synthesis and structural characterization of group 4 metal alkoxide complexes of N, N, N ′,N ′-tetrakis(2-hydroxyethyl)ethylenediamine and their use as initiators in the ring-opening polymerization (ROP) of rac -lactide under industrially relevant conditions. Inorganic Chemistry, 52 (19), pp. 10804-10811.

Chuck, C. J., Jenkins, R. W., Bannister, C. D., Han, L. and Lowe, J. P., 2012. Design and preliminary results of an NMR tube reactor to study the oxidative degradation of fatty acid methyl ester. Biomass and Bioenergy, 47, pp. 188-194.

Ciupa, A., De Bank, P. A. and Caggiano, L., 2013. Multicellular aggregation of maltol-modified cells triggered by Fe3+ ions. Chemical Communications, 49 (86), pp. 10148-10150.

Crezee, E., Tennison, B. D. and Crittenden, B. D., 2005. VOCs and NOx: better control and lower costs. Chemical Engineering Education

Crittenden, B. D. and England, R., 2005. Environmental impact assessment, teaching the principles and practices by means of a role-playing case study. Chemical Engineering Education, 39 (1), pp. 76-80.

Crittenden, B. D., Lau, A., Brinkmann, T. and Field, R. W., 2005. Oscillatory flow and axial dispersion in packed beds of spheres. Chemical Engineering Science, 60 (1), pp. 111-122.

Crittenden, B. D., Camus, O., Perera, S. P., Mays, T. J., Sanchez-Liarte, F., Tennison, S. R. and Crezee, E., 2011. Nonuniform channels in adsorbent monoliths. AIChE Journal, 57 (5), pp. 1163-1172.

Crittenden, B. D., Kolaczkowski, S. T., Takemoto, T. and Phillips, D. Z., 2009. Crude Oil Fouling in a Pilot-Scale Parallel Tube Apparatus. Heat Transfer Engineering, 30 (10-11), pp. 777-785.

Crittenden, B. D., Patton, A., Jouin, C., Perera, S., Tennison, S. and Echevarria, J. A. B., 2005. Carbon monoliths: a comparison with granular materials. Adsorption, 11 (1), pp. 537-541.

Cui, Z. F. and Chaudhuri, J. B., 2004. Tissue engineering. Food and Bioproducts Processing, 82 (C2), p. 103.

D'Hooge, F., Rogalle, D., Thatcher, M. J., Perera, S., van den Elsen, J. M. H., Jenkins, T. A., James, T. and Fossey, J., 2008. Polymerisation resistant synthesis of methacrylamido phenylboronic acids. Polymer, 49 (16), pp. 3362-3365.

Davidson, A., Al-Qallaf, B. and Das, D. B., 2008. Transdermal drug delivery by coated microneedles: Geometry effects on effective skin thickness and drug permeability. Chemical Engineering Research & Design, 86 (11A), pp. 1196-1206.

Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2012. A theoretical approach to zonation in a bioartificial liver. Biotechnology and Bioengineering, 109 (1), pp. 234-243.

Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2010. A theoretical method to improve and optimize the design of bioartificial livers. Biotechnology and Bioengineering, 106 (6), pp. 980-988.

Davidson, A. J., Ellis, M. J. and Chaudhuri, J. B., 2011. Bioartificial livers: A Modelling approach to hollow fibre bioreactor design. European Cells and Materials, 22 (Supplement 2), p. 22.

Di Lorenzo, M., Thomson, A. R., Schneider, K., Cameron, P. J. and Ieropoulosc, I., 2014. A small-scale air-cathode microbial fuel cell for on-line monitoring of water quality. Biosensors and Bioelectronics, 62, pp. 182-188.

Di Lorenzo, M., Curtis, T. P., Head, I. M. and Scott, K., 2009. A single-chamber microbial fuel cell as a biosensor for wastewaters. Water Research, 43 (13), pp. 3145-3154.

Di Lorenzo, M., Curtis, T. P., Head, I. M., Velasquez-Orta, S. B. and Scott, K., 2009. A single chamber packed bed microbial fuel cell biosensor for measuring organic content of wastewater. Water Science & Technology, 60 (11), pp. 2879-2887.

Di Lorenzo, M., Hidalgo, A., Haas, M. and Bornscheuer, U. T., 2005. Heterologous Production of Functional Forms of Rhizopus oryzae Lipase in Escherichia coli. Applied and Environmental Microbiology, 71 (12), pp. 8974-8977.

Di Lorenzo, M., Hidalgo, A., Molina, R., Hermoso, J. A., Pirozzi, D. and Bornscheuer, U. T., 2007. Enhancement of the Stability of a Prolipase from Rhizopus oryzae toward Aldehydes by Saturation Mutagenesis. Applied and Environmental Microbiology, 73 (22), pp. 7291-7299.

Di Lorenzo, M., Scott, K., Curtis, T. P. and Head, I. M., 2010. Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell. Chemical Engineering Journal, 156 (1), pp. 40-48.

Di Lorenzo, M., Scott, K., Curtis, T. P., Katuri, K. P. and Head, I. M., 2009. Continuous feed microbial fuel cell using an air cathode and a disc anode stack for wastewater treatment. Energy & Fuels, 23 (11), pp. 5707-5716.

Diederich, V. E. G., Studer, P., Kern, A., Lattuada, M., Storti, G., Sharma, R.I., Snedeker, J.G. and Morbidelli, M., 2013. Bioactive polyacrylamide hydrogels with gradients in mechanical stiffness. Biotechnology and Bioengineering, 110 (5), pp. 1508-1519.

Ding, Y., Chen, H., He, Y., Lapkin, A., Yeganeh, M., Siller, L. and Butenko, Y. V., 2007. Forced convective heat transfer of nanofluids. Advanced Powder Technology, 18 (6), pp. 813-824.

Dong, L. L., Cheung, C. S. and Leung, C. W., 2011. Combustion optimization of a port-array inverse diffusion flame jet. Energy, 36 (5), pp. 2834-2846.

Du Toit, H. and Di Lorenzo, M., 2014. Electrodeposited highly porous gold microelectrodes for the direct electrocatalytic oxidation of aqueous glucose. Sensors and Actuators B-Chemical, 192, pp. 725-729.

Du Toit, H. and Di Lorenzo, M., 2014. Glucose oxidase directly immobilized onto highly porous gold electrodes for sensing and fuel cell applications. Electrochimica Acta, 138, pp. 86-92.

Dyan, A., Duchateau, G., Eslava, S., Stehle, J.L., Damiani, D. and Piombini, H., 2009. Transmission measurements in rapid growth KDP and DKDP crystals. Journal of Modern Optics, 56 (1), pp. 45-49.

Edler, K. J., Arrowsmith, M., Hamilton, M. and Rigby, S. P., 2005. Modeling the fractal growth of templated, mesoporous silica films. Journal of Physical Chemistry B, 109 (13), pp. 6294-6303.

Elfeky, S. A., D'Hooge, F., Poncel, L., Chen, W. B., Perera, S. P., van den Elsen, J. M. H., James, T. D., Jenkins, A. T. A., Cameron, P. J. and Fossey, J. S., 2009. A surface plasmon enhanced fluorescence sensor platform. New Journal of Chemistry, 33 (7), pp. 1466-1469.

Elhweg, B., Burns, I. W., Chew, Y. M. J., Martin, P. J., Russell, A. B. and Wilson, D. I., 2009. Viscous dissipation and apparent wall slip in capillary rheometry of ice cream. Food and Bioproducts Processing, 87 (C4), pp. 266-272.

Elkilani, A., Bouhamra, W. and Crittenden, B. D., 2001. An indoor air quality model that includes the sorption of VOCs on fabrics. Process Safety and Environmental Protection, 79 (B4), pp. 233-243.

Ellis, M. J., Tai, C. C., Perera, S. and Chaudhuri, J. B., 2005. Biodegradable hollow fibre membranes for clinical scale bone tissue constructs. International Journal of Experimental Pathology, 86 (3), A16-A17.

Ellis, M. J. and Chaudhuri, J. B., 2008. Human bone derived cell culture on PLGA flat sheet membranes of different lactide: Glycolide ratio. Biotechnology and Bioengineering, 101 (2), pp. 369-377.

Ellis, M. J. and Chaudhuri, J. B., 2006. Poly(lactic-co-glycolic acid) hollow fibre membranes for use as a tissue engineering scaffold. Biotechnology and Bioengineering, 96 (1), pp. 177-187.

Ellis, M. J. and Chaudhuri, J. B., 2011. The relationship between poly(lactide-co-glycolide) monomer ratio, molecular weight and hollow fibre membrane scaffold morphology. Asia-Pacific Journal of Chemical Engineering, 6 (6), pp. 832-839.

Ellis, M. J., Forsey, R. and Chaudhuri, J. B., 2010. Post-culture treatment protocols for PLGA membrane scaffolds. Biotechnology Letters, 32 (2), pp. 215-222.

Emanuelsson, E. A. C., Emanuelsson, M. A. E., Patterson, D. A., Castro, P. M. L. and Livingston, A. G., 2007. Microbiology for chemical engineers: from macro to micro scale. Asia-Pacific Journal of Chemical Engineering, 2 (5), pp. 448-454.

England, R., 2007. Developments and applications of membranes in chemical and bioprocess engineering. Journal of Applied Sciences, 7 (15), pp. 1991-1997.

Esconjauregui, S., Fouquet, M., Bayer, B.C., Eslava, S., Khachadorian, S., Hofmann, S. and Robertson, J., 2011. Manipulation of the catalyst-support interactions for inducing nanotube forest growth. Journal of Applied Physics, 109 (4).

Esconjauregui, S., Xie, R., Guo, Y., Pfaendler, S.M.-L., Fouquet, M., Gillen, R., Cepek, C., Castellarin-Cudia, C., Eslava, S. and Robertson, J., 2013. Electrical conduction of carbon nanotube forests through sub-nanometric films of alumina. Applied Physics Letters, 102 (11).

Eslava, S., Baklanov, M.R., Iacopi, F., Brongersma, S.H., Kirschhock, C.E.A. and Maex, K., 2006. Zeolite low-k film properties dependence on nanocrystal size. Materials Research Society Symposium Proceedings, 914, pp. 421-426.

Eslava, S., Baklanov, M.R., Kirschhock, C.E.A., Iacopi, F., Aldea, S., Maex, K. and Martens, J.A., 2007. Characterization of a molecular sieve coating using ellipsometric porosimetry. Langmuir, 23 (26), pp. 12811-12816.

Eslava, S., Baklanov, M.R., Neimark, A.V., Iacopi, F., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Evidence of large voids in pure-silica-zeolite low-k dielectrics synthesized by spin-on of nanoparticle suspensions. Advanced Materials, 20 (16), pp. 3110-3116.

Eslava, S., Baklanov, M.R., Urrutia, J., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Nanoporous organosilicate films prepared in acidic conditions using tetraalkylammonium bromide porogens. Advanced Functional Materials, 18 (20), pp. 3332-3339.

Eslava, S., Delahaye, S., Baklanov, M.R., Iacopi, F., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2008. Reaction of trimethylchlorosilane in spin-on Silicalite-1 zeolite film. Langmuir, 24 (9), pp. 4894-4900.

Eslava, S., Eymery, G., Marsik, P., Iacopi, F., Kirschhock, C.E.A., Maex, K., Martens, J.A. and Baklanov, M.R., 2008. Optical property changes in low- k films upon ultraviolet-assisted curing. Journal of the Electrochemical Society, 155 (5).

Eslava, S., Goodwill, B.P.R., McPartlin, M. and Wright, D.S., 2011. Extending the family of titanium heterometallic-oxo-alkoxy cages. Inorganic Chemistry, 50 (12), pp. 5655-5662.

Eslava, S., Hengesbach, F., McPartlin, M. and Wright, D.S., 2010. Heterometallic cobalt(ii)-titanium(iv) oxo cages; Key building blocks for hybrid materials. Chemical Communications, 46 (26), pp. 4701-4703.

Eslava, S., Iacopi, F., Baklanov, M.R., Kirschhock, C.E.A., Maex, K. and Martens, J.A., 2007. Ultraviolet-assisted curing of polycrystalline pure-silica zeolites : Hydrophobization, functionalization, and cross-linking of grains. Journal of the American Chemical Society, 129 (30), pp. 9288-9289.

Eslava, S., Iacopi, F., Urbanowicz, A.M., Kirschhock, C.E.A., Maex, K., Martens, J.A. and Baklanov, M.R., 2008. Ultraviolet-assisted curing of organosilicate glass low-k dielectric by excimer lamps. Journal of the Electrochemical Society, 155 (11).

Eslava, S., Kirschhock, C.E.A., Aldea, S., Baklanov, M.R., Iacopi, F., Maex, K. and Martens, J.A., 2009. Characterization of spin-on zeolite films prepared from Silicalite-1 nanoparticle suspensions. Microporous and Mesoporous Materials, 118 (1-3), pp. 458-466.

Eslava, S., McPartlin, M., Thomson, R.I., Rawson, J.M. and Wright, D.S., 2010. Single-source materials for metal-doped titanium oxide : Syntheses, structures, and properties of a series of heterometallic transition-metal titanium oxo cages. Inorganic Chemistry, 49 (24), pp. 11532-11540.

Eslava, S., Papageorgiou, A.C., Beaumont, S.K., Kyriakou, G., Wright, D.S. and Lambert, R.M., 2010. Synthesis, characterization, and surface tethering of sulfide- functionalized Ti-oxo-alkoxy cages. Chemistry of Materials, 22 (18), pp. 5174-5178.

Eslava, S., Seo, J.W., Kirschhock, C.E.A., Baklanov, M.R., Maex, K. and Martens, J.A., 2010. Comment on MEL-type pure-silica zeolite nanocrystals prepared by an evaporation-assisted two-stage synthesis method as ultra-low-k materials. Advanced Functional Materials, 20 (15), pp. 2377-2379.

Eslava, S., Urrutia, J., Busaworv, A.N., Baklanov, M.R., Iacopi, F., Aldea, S., Maex, K., Martens, J.A. and Kirschhock, C.E.A., 2008. Zeolite-inspired low-k dielectrics overcoming limitations of zeolite films. Journal of the American Chemical Society, 130 (51), pp. 17528-17536.

Eslava, S., Zhang, L., Esconjauregui, S., Yang, J., Vanstreels, K., Baklanov, M.R. and Saiz, E., 2013. Metal-organic framework ZIF-8 films as low-κ dielectrics in microelectronics. Chemistry of Materials, 25 (1), pp. 27-33.

Evans, P. J. and Bird, M. R., 2006. Solute-membrane fouling interactions during the ultrafiltration of black tea liquor. Food and Bioproducts Processing, 84 (C4), pp. 292-301.

Evans, P. J. and Bird, M. R., 2010. The role of black tea feed conditions upon ultrafiltration performance during membrane fouling and cleaning. Journal of Food Process Engineering, 33 (2), pp. 309-332.

Evans, P. J., Bird, M. R., Rogers, D. and Wright, C. J., 2009. Measurement of polyphenol-membrane interaction forces during the ultrafiltration of black tea liquor. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 335 (1-3), pp. 148-153.

Evans, P. J., Bird, M. R., Pihlajamaeki, A. and Nystroem, M., 2008. The influence of hydrophobicity, roughness and charge upon ultrafiltration membranes for black tea liquor clarification. Journal of Membrane Science, 313 (1-2), pp. 250-262.

Fahey, E. and Chaudhuri, J. B., 2001. Molecular characterisation of size exclusion chromatography refolded urokinase-plasminogen activator. Chemical Engineering Science, 56 (17), pp. 4971-4978.

Fan, X. L., Lapkin, A. A. and Plucinski, P. K., 2009. Liquid phase hydrogenation in a structured multichannel reactor. Catalysis Today, 147 (Supplement), S313-S318.

Fan, X. L., Manchon, M. G., Wilson, K., Tennison, S., Kozynchenko, A., Lapkin, A. A. and Plucinski, P. K., 2009. Coupling of Heck and hydrogenation reactions in a continuous compact reactor. Journal of Catalysis, 267 (2), pp. 114-120.

Fan, X., Chen, H., Ding, Y., Plucinski, P. K. and Lapkin, A. A., 2008. Potential of nanofluids' to further intensify microreactors. Green Chemistry, 10 (6), pp. 670-677.

Feng, X., Patterson, D.A., Balaban, M. and Emanuelsson, E. A. C., 2013. Characterization of tributyrin hydrolysis by immobilized lipase on woolen cloth using conventional batch and novel spinning cloth disc reactors. Chemical Engineering Research & Design, 91 (9), pp. 1684-1692.

Feng, X., Patterson, D.A., Balaban, M. and Emanuelsson, E.A.C., 2014. Increasing reaction rate and conversion in the spinning cloth disc reactor : Investigating the effect of using multiple enzyme immobilized cloths. Chemical Engineering Journal, 255, pp. 356-364.

Feng, X., Patterson, D.A., Balaban, M. and Emanuelsson, E. A. C., 2013. Enabling the utilization of wool as an enzyme support : Enhancing the activity and stability of lipase immobilized onto woolen cloth. Colloids and Surfaces B: Biointerfaces, 102, pp. 526-533.

Feng, X., Patterson, D. A., Balaban, M., Fauconnier, G. and Emanuelsson, E. A. C., 2013. The spinning cloth disc reactor for immobilized enzymes : A new process intensification technology for enzymatic reactions. Chemical Engineering Journal, 221, pp. 407-417.

Feng, X., Patterson, D. A., Balaban, M. and Emanuelsson, E. A. C., 2014. Characterization of liquid flow in the spinning cloth disc reactor : residence time distribution, visual study and modeling. Chemical Engineering Journal, 235, pp. 356-367.

Field, R., Hang, S. and Arnot, T., 1994. The influence of surfactant on water flux through microfiltration membranes. Journal of Membrane Science, 86 (3), pp. 291-304.

Field, R. and Howell, J. A., 2001. Treating phenolic pollutants with membranes. Tce, 717, pp. 36-37.

Foo, R., Vazhnova, T., Lukyanov, D. B., Millington, P., Collier, J., Rajaram, R. and Golunski, S., 2015. Forthcoming. Formation of reactive Lewis acid sites on Fe/WO3–ZrO2 catalysts for higher temperature SCR applications. Applied Catalysis B: Environmental, 162, pp. 174-179.

Forgacs, G., Alinezhad, S., Mirabdollah, A., Feuk-Legarstedt, E. and Sárvári Horváth, I., 2011. Biological treatment of chicken feather waste for improved biogas production. Journal of Environmental Sciences, 23 (10), pp. 1747-1753.

Forgacs, G., Lundin, M., Taherzadeh, M. J. and Sárvári Horváth, I., 2013. Pretreatment of chicken feather waste for improved biogas production. Biotechnology and Applied Biochemistry, 169 (7), pp. 2016-2028.

Forgacs, G., Niklasson, C., Sárvári Horváth, I. and Taherzadeh, M. J., 2014. Forthcoming. Methane production from feather waste pretreated with Ca(OH)2 : Process development and economical analysis. Waste and Biomass Valorization, 5 (1), pp. 65-73.

Forgacs, G., Pourbafrani, M., Niklasson, C., Taherzadeh, M. J. and Sárvári Horváth, I., 2012. Methane production from citrus wastes : Process development and cost estimation. Journal of Chemical Technology & Biotechnology, 87 (2), pp. 250-255.

Forsey, R. W. and Chaudhuri, J. B., 2009. Validity of DNA analysis to determine cell numbers in tissue engineering scaffolds. Biotechnology Letters, 31 (6), pp. 819-823.

Forsey, R. W., Tare, R., Oreffo, R. O. C. and Chaudhuri, J. B., 2012. Perfusion bioreactor studies of chondrocyte growth in alginate-chitosan capsules. Biotechnology and Applied Biochemistry, 59 (2), pp. 142-152.

Freedman, J. R., Mattia, D., Korneva, G., Gogotsi, Y., Friedman, G. and Fontecchio, A. K., 2007. Magnetically assembled carbon nanotube tipped pipettes. Applied Physics Letters, 90 (10), 103108/1-103108/3.

Freger, V., Arnot, T. C. and Howell, J. A., 2000. Separation of concentrated organic/inorganic mixtures by nanofiltration. Journal of Membrane Science, 178 (1-2), 185–193.

Gan, Q., Howell, J. A., Field, R. W., England, R., Bird, M. R., O'Shaughnessy, C. L. and MeKechinie, M. T., 2001. Beer clarification by microfiltration - product quality control and fractionation of particles and macromolecules. Journal of Membrane Science, 194 (2), pp. 185-196.

Gao, C.-H., Chen, Y.-N., Pan, L.-X., Lei, F., Long, B., Hu, L.-Q., Zhang, R.-C., Ke, K. and Huang, R.-M., 2014. Two new cyclic tetrapeptides from deep-sea bacterium bacillus amyloliquefaciens GAS 00152. Journal of Antibiotics, 67, pp. 541-543.

García, T., Murillo, R., Agouram, S., Dejoz, A., Lázaro, M. J., Torrente Murciano, L. and Solsona, B., 2012. Highly dispersed encapsulated AuPd nanoparticles on ordered mesoporous carbons for the direct synthesis of H2O2 from molecular oxygen and hydrogen. Chemical Communications, 48 (43), pp. 5316-5318.

García-García, F. R., Torrente Murciano, L., Chadwick, D. and Li, K., 2012. Hollow fibre membrane reactors for high H2 yields in the WGS reaction. Journal of Membrane Science, 405-406, pp. 30-37.

García-Tuñon, E., Franco, J., Eslava, S., Bhakhri, V., Saiz, E., Giuliani, F. and Guitián, F., 2013. Synthesis and optimization of the production of millimeter-sized hydroxyapatite single crystals by Cl-OH ion exchange. Journal of the American Ceramic Society, 96 (3), pp. 759-765.

Genet, M., Houmard, M., Eslava, S., Saiz, E. and Tomsia, A.P., 2013. Erratum to A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting : Possibilities and limits. Journal of the European Ceramic Society, 33 (8), p. 1393.

Genet, M., Houmard, M., Eslava, S. and Tomsia, A.P., 2013. A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting : Possibilities and limits. Journal of the European Ceramic Society, 33 (4), pp. 679-688.

Ghazali, N. F., Patterson, D. A. and Livingston, A. G., 2004. Elucidation of the mechanism of chiral selectivity in diastereomeric salt formation using organic solvent nanofiltration. Chemical Communications, 2004 (8), pp. 962-963.

Gibbons, E., Irwin, J., Livingston, A. G., Muir, J. C., Patterson, D., Roengpithya, C. and Taylor, P. C., 2005. Dynamic kinetic resolution of racemates using membrane-separated catalysts. Abstracts of Papers of the American Chemical Society, 229, U550.

Gimeno, O., Plucinski, P., Kolaczkowski, S. T., Rivas, F. J. and Alvarez, P. M., 2003. Removal of the Herbicide MCPA by Commercial Activated Carbons: Equilibrium, Kinetics, and Reversibility. Industrial & Engineering Chemistry Research, 42 (5), pp. 1076-1086.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R., Cartmell, S. and Chaudhuri, J., 2009. Influence of porosity on polarisation and electrical properties of hydroxyapatite based ceramics. Ferroelectrics, 390 (1), pp. 168-176.

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. and Chaudhuri, J., 2007. Characterisation of ferroelectric-calcium phosphate composites and ceramics. Journal of the European Ceramic Society, 27 (13-15), pp. 4187-4190.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2009. Electrical characterization of hydroxyapatite-based bioceramics. Acta Biomaterialia, 5 (2), pp. 743-754.

Goller, B., Polisski, S., Moskalenko, A., Loponov, K. and Kovalev, D., 2008. Photoexcited silicon nanocrystals as multifunctional spin-flip activator. ECS Transactions, 16 (3), pp. 337-344.

Gopinathan, N., Greaves, M., Rigby, S.P. and Wood, J., 2013. Investigation of the problems with using gas adsorption to probe catalyst pore structure evolution during coking. Journal of Colloid and Interface Science, 393 (1), pp. 234-240.

Gopinathan, N., Greaves, M., Lowe, J. P., Wood, J. and Rigby, S. P., 2012. Determination of the location of coke in catalysts by a novel NMR-based, liquid-porosimetry approach. Journal of Colloid and Interface Science, 381 (1), pp. 164-170.

Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Letzelter, N., York, D. W. and Wilson, D. I., 2012. Elucidating enzyme-based cleaning of protein soils (gelatine and egg yolk) using a scanning fluid dynamic gauge. Chemical Engineering Research & Design, 90 (1), pp. 162-171.

Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Wilson, D. I. and York, D. W., 2010. Studies into the swelling of gelatine films using a scanning fluid dynamic gauge. Food and Bioproducts Processing, 88 (C4), pp. 357-364.

Gordon, P. W., Brooker, A. D. M., Chew, Y. M. J., Wilson, D. I. and York, D. W., 2010. A scanning fluid dynamic gauging technique for probing surface layers. Measurement Science & Technology, 21 (8), 085103.

Gordon, P. W., Schöler, M., Föste, H., Helbig, M., Augustin, W., Chew, Y. M. J., Scholl, S., Majschak, J.-P. and Wilson, D. I., 2014. A comparison of local phosphorescence detection and fluid dynamic gauging methods for studying the removal of cohesive fouling layers : effect of layer roughness. Food and Bioproducts Processing, 92 (1), pp. 46-53.

Greaves, M. and Bentaher, A. H., 2007. Exothermicity characteristics of wolf lake heavy oil, Athabasca tar sand and clair medium heavy oil. Journal of Canadian Petroleum Technology, 46 (9), pp. 16-19.

Greaves, M., Turta, A. T., Ayasse, C. and Saghr, A. M., 2001. THAI-New Injection Technology For heavy Oil Recovery & In Situ Upgrading. Transactions of the Institute of Chemical Engineers: Part A, 40 (3), pp. 38-47.

Greaves, M. and Xia, T. X., 2004. Downhole catalytic process for upgrading heavy oil: Produced oil properties and composition. Journal of Canadian Petroleum Technology, 43 (9), pp. 25-30.

Greaves, M. and Xia, T. X., 2010. Laboratory studies of producing hydrogen and incremental oil from light oil reservoirs using downhole gasification. Journal of Canadian Petroleum Technology, 49 (3), pp. 65-70.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Downhole gasification for improved oil recovery. Prog. Oilfield Chem., 6 (Managing Matured Fie), pp. 1-12.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2006. Experimental study of a novel in situ gasification technique for improved oil recovery from light oil reservoirs. Journal of Canadian Petroleum Technology, 45 (8), pp. 41-47.

Greaves, M., Xia, T. X., Werfilli, M. S. and Rathbone, R. R., 2002. THAI Process-Effect of Oil Layer Thickness On Heavy Oil Recovery, Proceedings of the Petroleum Society's International Petroleum Conference: Calgary, Canada. Journal of Canadian Petroleum Engineers, 2002-027, pp. 1-11.

Greaves, M., Dong, L. L. and Rigby, S., 2012. Validation of toe-to-heel air-injection bitumen recovery using 3D combustion-cell results. SPE Reservoir Evaluation and Engineering, 15 (1), pp. 72-85.

Greaves, M., Dong, L. L. and Rigby, S. P., 2012. Simulation study of the toe-to-heel air injection three-dimensional combustion cell experiment and effects in the mobile oil zone. Energy & Fuels, 26 (3), pp. 1656-1669.

Greaves, M., El-Saghr, A. and Xia, T. X., 2000. CAPRI horizontal well reactor for catalytic upgrading of heavy oil. Preprints - American Chemical Society, Division of Petroleum Chemistry, 45 (4), pp. 595-598.

Greaves, M., Saghr, A., T. X. Xia, T., Turtar, A. and Ayasse, C.., 2001. THAI- new air injection technology for heavy oil recovery and in situ upgrading. Journal of Canadian Petroleum Technology, 40 (3).

Greaves, M., Xia, T. X. and Turta, A. T., 2008. Stability of THAI™ process : Theoretical and experimental observations. Journal of Canadian Petroleum Technology, 47 (9), pp. 65-73.

Greaves, M. and Xia, T. X., 2004. Downhole upgrading of Wolf Lake oil using THAI/CAPRI processes - tracer tests. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 49 (1), pp. 69-72.

Greaves, M. and Xia, T. X., 2008. The reservoir as reactor. Tce, 801, pp. 35-37.

Gribbon, C., Channon, K. J., Zhang, W., Banwell, E. F., Bromley, E. H. C., Chaudhuri, J. B., Oreffo, R. O. C. and Woolfson, D. N., 2008. MagicWand: a single, designed peptide that assembles to stable, ordered α-helical fibers. Biochemistry, 47 (39), pp. 10365-10371.

Griffen, J., White, J., Kociok-Kohn, G., Lloyd, M., Wells, A., Arnot, T. and Lewis, S., 2013. New aminocyclitols with quaternary stereocentres via acylnitroso cycloaddition with an ipso,ortho-arene dihydrodiol. Tetrahedron, 69 (29), pp. 5989-5997.

Griffiths, O.G., O'Byrne, J.P., Torrente-Murciano, L., Jones, M.D., Mattia, D. and McManus, M.C., 2013. Identifying the largest environmental life cycle impacts during carbon nanotube synthesis via chemical vapour deposition. Journal of Cleaner Production, 42, pp. 180-189.

Grogan, M. D. W., Leon-Saval, S. G., England, R. and Birks, T., 2010. Silica aerogel core waveguide. Optics Express, 18 (21), pp. 22497-22502.

Gu, T., Albert, F., Augustin, W., Chew, Y. M. J., Paterson, W. R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D. I., 2011. Fluid dynamic gauging applied to annular test apparatuses for fouling and cleaning. Heat Transfer Engineering, 32 (3-4), pp. 339-348.

Gu, T., Albert, F., Augustin, W., Chew, Y. M. J., Mayer, M., Paterson, W. R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D. I., 2011. Application of fluid dynamic gauging to annular test apparatuses for studying fouling and cleaning. Experimental Thermal and Fluid Science, 35 (3), pp. 509-520.

Gu, T., Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2009. Experimental and CFD studies of fluid dynamic gauging in annular flows. AIChE Journal, 55 (8), pp. 1937-1947.

Gu, T., Chew, Y. M. J., Paterson, W. R. and Wilson, D. I., 2009. Experimental and CFD studies of fluid dynamic gauging in duct flows. Chemical Engineering Science, 64 (2), pp. 219-227.

Guise, A. D. and Chaudhuri, J. B., 2001. Initial protein concentration and residual denaturant concentration strongly affect the batch refolding of hen egg white lysozyme. Biotechnology and Bioprocess Engineering, 6 (6), pp. 410-418.

Gyepi-Garbrah, I. A., Eisenthal, R., Plant, A. and Hubble, J., 2001. Development and evaluation of a tentacle affinity adsorbent. International Journal of Bio-Chromatography, 6 (3), pp. 195-206.

Hamid, M. H. S. A., Allen, C. L., Lamb, G. W., Maxwell, A. C., Maytum, H. C., Watson, A. J. A. and Williams, J. M. J., 2009. Ruthenium-catalyzed N-alkylation of amines and sulfonamides using borrowing hydrogen methodology. Journal of the American Chemical Society, 131 (5), pp. 1766-1774.

Hancock, S.L., Mahon, M.F. and Jones, M.D., 2013. Aluminium salalen complexes based on 1,2-diaminocyclohexane and their exploitation for the polymerisation of rac-lactide. Dalton Transactions, 42 (25), pp. 9279-9285.

Hargreaves, J. S. J. and Lapkin, A. A., 2003. Preface. Catalysis Today, 81 (4), p. 529.

Harkins, M., Lou-Hing, D., Sargeant, L. A. and Chuck, C. J., 2013. Effect of bacterial invasion on the growth and lipid production of the oleaginous yeast Rhodotorula glutinis. Journal of Technology Innovations in Renewable Energy, 2 (3), pp. 222-230.

Harrowing, S. R. and Chaudhuri, J. B., 2003. Effect of column dimensions and flow rates on size-exclusion refolding of beta -lactamase. Journal of Biochemical and Biophysical Methods, 56 (1-3), pp. 177-188.

Hart, A., Leeke, G., Greaves, M. and Wood, J., 2014. Down-hole heavy crude oil upgrading by CAPRI : Effect of hydrogen and methane gases upon upgrading and coke formation. Fuel, 119, pp. 226-235.

Hart, A., Leeke, G., Greaves, M. and Wood, J., 2014. Downhole heavy crude oil upgrading using CAPRI : effect of steam upon upgrading and coke formation. Energy & Fuels, 28 (3), pp. 1811-1819.

Hart, J. N., Parker, S. C. and Lapkin, A. A., 2009. Energy Minimization of Single-Walled Titanium Oxide Nanotubles. ACS Nano, 3 (11), pp. 3401-3412.

Harvey, H. A., Ketterer, M. R., Preston, A., Lubaroff, D., Williams, R. and Apicella, M. A., 1997. Ultrastructural analysis of primary human urethral epithelial cell cultures infected with Neisseria gonorrhoeae. Infection and Immunity, 65 (6), pp. 2420-2427.

Hassan, F., Wang, J. W., Chigada, P. I., Al-Duri, B., Rigby, S. P. and Wood, J., 2011. Deactivation during 1-Hexene Isomerization over Zeolite Y and ZSM5 Catalysts under Supercritical Conditions. Industrial & Engineering Chemistry Research, 50 (12), pp. 7161-7171.

Hatziantoniou, D. and Howell, J. A., 2002. Influence of the properties and characteristics of sugar-beet pulp extract on its fouling and rejection behavior during membrane filtration. Desalination, 148 (1-3), pp. 67-72.

Hayes, R. E., Kolaczkowski, S. T., Li, P. K. C. and Awdry, S., 2001. The palladium catalyzed oxidation of methane: reaction kinetics and the effect of diffusion barriers. Chemical Engineering Science, 56 (16), pp. 4815-4835.

Hayes, R. E., Bertrand, F. H., Audet, C. and Kolaczkowski, S. T., 2003. Catalytic combustion kinetics: using a direct search algorithm to evaluate kinetic parameters from light-off curves. Canadian Journal of Chemical Engineering, 81 (6), pp. 1192-1199.

Head, L. E. and Bird, M. R., 2013. The removal of psychrotropic spores from milk protein isolate feeds using tubular ceramic microfilters. Journal of Food Process Engineering, 36 (1), pp. 113-124.

Head, L. E. and Bird, M. R., 2013. Backwashing of tubular ceramic microfilters fouled with milk protein isolate feeds. Journal of Food Process Engineering, 36 (2), pp. 228-240.

Hicks, D. I., Crittenden, B. D. and Warhurst, A. C., 2000. Design for decommissioning: Addressing the future closure of chemical sites in the design of new plant. Process Safety and Environmental Protection, 78 (6), pp. 465-467.

Hill, A. and Torrente Murciano, L., 2014. In-situ H2 production via low temperature decomposition of ammonia : insights into the role of cesium as a promoter. International Journal of Hydrogen Energy, 39 (15), pp. 7646-7654.

Hitchcock, I., Chudek, J. A., Holt, E. M., Lowe, J. P. and Rigby, S. P., 2010. NMR Studies of Cooperative Effects in Adsorption. Langmuir, 26 (23), pp. 18061-18070.

Hitchcock, I., Holt, E. M., Lowe, J. P. and Rigby, S. P., 2011. Studies of freezing-melting hysteresis in cryoporometry scanning loop experiments using NMR diffusometry and relaxometry. Chemical Engineering Science, 66 (4), pp. 582-592.

Hooper, L. E., Mosley, P. J., Muir, A. C., Wadsworth, W. J. and Knight, J. C., 2011. Coherent supercontinuum generation in photonic crystal fiber with all-normal group velocity dispersion. Optics Express, 19 (6), pp. 4902-4907.

Howell, J. A., 2004. Future of membranes and membrane reactors in green technologies and for water reuse. Desalination, 162 (1-3), pp. 1-11.

Howell, J. A., Arnot, T. C. and Chua, H. C., 2003. Turnup turndown of membrane operation of membrane bioreactors. Annals of the New York Academy of Sciences, 984 (Advanced Membrane Te), pp. 492-501.

Howell, J. A., Arnot, T. C., Chua, H. C., Godino, P., Hatziantoniou, D. and Metsamuuronen, S., 2002. Controlled flux behavior of membrane processes. Macromolecular Symposia, 188 (Polymer Membranes), pp. 23-35.

Howell, J. A., Arnot, T. C. and Liu, W., 2003. Membrane bioreactors for treating waste streams. Annals of the New York Academy of Sciences, 984 (Advanced Membrane Te), pp. 411-419.

Howell, J. A., Chua, H. C. and Arnot, T. C., 2004. In situ manipulation of critical flux in a submerged membrane bioreactor using variable aeration rates, and effects of membrane history. Journal of Membrane Science, 242 (1-2), pp. 13-19.

Howell, J. A., 2002. Future research and developments in the membrane field. Desalination, 144 (1-3), pp. 127-131.

Hruzewicz-Kolodziejczyk, A., Ting, V. P., Bimbo, N. and Mays, T. J., 2012. Improving comparability of hydrogen storage capacities of nanoporous materials. International Journal of Hydrogen Energy, 37 (3), pp. 2728-2736.

Hu, Z., Pantoș, G. D., Kuganathan, N., Arrowsmith, R., Jacobs, R. M. J., Kociok-Köhn, G., O'Byrne, J., Jurkschat, K., Burgos, P., Tyrrell, R. M., Botchway, S. W., Sanders, J. K. M. and Pascu, S. I., 2012. Interactions between amino acid-tagged naphthalenediimide and single walled carbon nanotubes for the design and construction of new bioimaging probes. Advanced Functional Materials, 22 (3), pp. 503-518.

Huang, J.-Y., Chew, Y.M.J. and Wilson, D.I., 2013. Investigating the effect of starting mode on food fat gel layer formation on cold surfaces. Journal of Food Engineering, 119 (3), pp. 454-463.

Huang, J. Y., Chew, Y. M. J. and Wilson, I. D., 2012. A spinning disc study of fouling of cold heat transfer surfaces by gel formation from model food fat solutions. Journal of Food Engineering, 109 (1), pp. 49-61.

Hubble, J., 2007. Affinity adsorption of cells to surfaces and strategies for cell detachment. Advances in Biochemical Engineering/Biotechnology, 106 (Cell Separation), pp. 75-99.

Hubble, J., 2001. Competition and intrinsic displacement effects in overloaded weak affinity chromatography. Separation Science and Technology, 36 (4), pp. 541-554.

Hubble, J., 2003. Monte Carlo simulation of biospecific interactions between cells and surfaces. Chemical Engineering Science, 58 (19), pp. 4465-4474.

Hubble, J., 2001. Stochastic modeling of affinity adsorption. Biotechnology Progress, 17 (3), pp. 565-567.

Ilinich, O. M. and Lapkin, A. A., 2002. Sorbate-induced structural rearrangements and permeation of gases in the polyphenylene oxide copolymer. Polymer, 43 (11), pp. 3209-3215.

Iwan, A., Stephenson, H., Ketchie, W. C. and Lapkin, A., 2009. High temperature sequestration of CO2 using lithium zirconates. Chemical Engineering Journal, 146 (2), pp. 249-258.

Jackson, T. R., Springall, J. S., Rogalle, D., Masurnoto, N., Li, H. C., D'Hooge, F., Perera, S. P., Jenkins, A. T. A., James, T. D., Fossey, J. S. and van den Elsen, J. M. H., 2008. Boronate affinity saccharide electrophoresis : A novel carbohydrate analysis tool. Electrophoresis, 29 (20), pp. 4185-4191.

James, K., 2012. An investigation of the relationship between recycling paper and card and greenhouse gas emissions from land use change. Resources, Conservation and Recycling, 67, pp. 44-55.

Jarman-Smith, M., Bodamyali, T., Stevens, C., Howell, J. A., Horrocks, M. and Chaudhuri, J. B., 2004. Human fibroblast culture on a crosslinked dermal porcine collagen matrix. Biochemical Engineering Journal, 20 (2-3), pp. 217-222.

Jarman-Smith, M. L., Bodamyali, T., Stevens, C., Howell, J. A., Horrocks, M. and Chaudhuri, J. B., 2004. Porcine collagen crosslinking, degradation and its capability for fibroblast adhesion and proliferation. Journal of Materials Science: Materials in Medicine, 15 (8), pp. 925-932.

Jeffs, C.A., Smith, M.W., Stone, C.A., Bezzu, C.G., Msayib, K.J., McKeown, N.B. and Perera, S. P., 2013. A polymer of intrinsic microporosity as the active binder to enhance adsorption/separation properties of composite hollow fibres. Microporous and Mesoporous Materials, 170, pp. 105-112.

Jeffs, C., Smith, M. W., Stone, C. A., Crittenden, B. and Perera, S., 2013. Low pressure drop respirator gas filters using adsorbent hollow fibres as an alternative to granular adsorbents. Journal of Int. Society for Respirator Protection, 30, pp. 12-29.

Jenkins, R. W., Munro, M., Nash, S. and Chuck, C. J., 2013. Potential renewable oxygenated biofuels for the aviation and road transport sectors. Fuel, 103, pp. 593-599.

Jenkins, R. W., Stageman, N. E., Fortune, C. M. and Chuck, C. J., 2014. Effect of the type of bean, processing, and geographical location on the biodiesel produced from waste coffee grounds. Energy & Fuels, 28 (2), pp. 1166-1174.

Jodłowski, P.J., Goła̧b, R., Kryca, J., Kołodziej, A., Iwaniszyn, M., Kolaczkowski, S.T. and Łojewska, J., 2013. A comparison between monolithic and wire gauze structured catalytic reactors for CH4 and CO removal from biogas-fuelled engine exhaust. Topics in Catalysis, 56 (1-8), pp. 390-396.

Jones, M. I., Wang, L. Y., Abeynaike, A. and Patterson, D. A., 2011. Utilisation of waste material for environmental applications: calcination of mussel shells for waste water treatment. Advances in Applied Ceramics, 110 (5), pp. 280-286.

Jones, M. I., Barakat, H. and Patterson, D. A., 2011. Production of hydroxyapatite from waste mussel shells. IOP Conference Series: Materials Science and Engineering, 18 (19), 192002.

Jones, S. A., Chew, Y. M. J., Wilson, D. I. and Bird, M. R., 2012. Fluid dynamic gauging of microfiltration membranes fouled with sugar beet molasses. Journal of Food Engineering, 108 (1), pp. 22-29.

Jones, S. A., Bird, M. R. and Pihlajamaki, A., 2011. An experimental investigation into the pre-treatment of synthetic membranes using sodium hydroxide solutions. Journal of Food Engineering, 105 (1), pp. 128-137.

Jones, S. A., Chew, Y. M. J., Bird, M. R. and Wilson, D. I., 2010. The application of fluid dynamic gauging in the investigation of synthetic membrane fouling phenomena. Food and Bioproducts Processing, 88 (4), pp. 409-418.

Jones, S. A., Pihlajamäki, A. and Bird, M. R., 2012. The role of synthetic membrane pre-treatment in influencing filtration performance over multiple operational cycles. Separation Science and Technology, 47 (8), pp. 1119-1128.

Jraou, M., Feki, F., Arnot, T., Skouteris, G. and Sayadi, S., 2013. Application of membrane bioreactor technology for urban wastewater treatment in Tunisia : Focus on treated water quality. Sustainable Sanitation Practice, 14, pp. 49-54.

Kagansky, A., Freeman, L., Lukyanov, D. and Strunnikov, A., 2004. Histone Tail-independent Chromatin Binding Activity of Recombinant Cohesin Holocomplex. Journal of Biological Chemistry, 279 (5), pp. 3382-3388.

Kolaczkowski, S. T., 2003. Measurement of effective diffusivity in catalyst-coated monoliths. Catalysis Today, 83 (1-4), pp. 85-95.

Kolaczkowski, S. T., Chao, R., Awdry, S. and Smith, A., 2007. Application of a CFD code (FLUENT) to formulate models of catalytic gas phase reactions in porous catalyst pellets. Chemical Engineering Research & Design, 85 (A11), pp. 1539-1552.

Kolaczkowski, S. T. and Kim, S., 2006. Novel alumina 'KK Leaf Structures' as catalyst supports. Catalysis Today, 117 (4), pp. 554-558.

Kolaczkowski, S., Ye, S., Yap, Y., Robinson, K. and Lukyanov, D., 2012. Transient experiments on a full-scale DOC - methodology and techniques to support modelling. Catalysis Today, 188 (1), pp. 53-61.

Kolaczkowski, S., 2006. Treatment of volatile organic carbon (VOC) emissions from stationary sources: catalytic oxidation of the gaseous phase. Chemical Industries, 110 (Structured Catalysts), pp. 147-170.

Kolaczkowski, S. T., Asli, U. A. and Davidson, M. G., 2009. A new heterogeneous ZnL2 catalyst on a structured support for biodiesel production. Catalysis Today, 147 (Supplement), S220-S224.

Koltuniewicz, A. B., Field, R. W. and Arnot, T., 1995. Cross-flow and dead-end microfiltration of oily-water emulsion. Part I: Experimental study and analysis of flux decline. Journal of Membrane Science, 102, pp. 193-201.

Korneva, G., Mattia, D., Gogotsi, Y. and Bradley, J. C., 2006. Filling carbon nanopipes with functionalized nanoparticles. Abstracts of Papers, 231st ACS National Meeting, Atlanta, GA, United States, March 26-30, 2006

Korneva, G., Mattia, D., Gogotsi, Y., Halverson, D., Friedman, G., Yee, H. and Bradley, J.-C., 2006. Filling carbon nanopipes with functional nanoparticles. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 51 (1), pp. 36-37.

Koumpouras, G. C., Alpay, E., Lapkin, A., Ding, Y. and Stepanek, F., 2007. The effect of adsorbent characteristics on the performance of a continuous sorption-enhanced steam methane reforming process. Chemical Engineering Science, 62 (18-20), pp. 5632-5637.

Kramer, M., Chaudhuri, J. B., De Bank, P. A. and Ellis, M. J., 2011. Aligned neurite outgrowth on electrospun PLGA nanofibres. European Cells and Materials, 22 (Supplement 2), p. 59.

Kramer, M., Chaudhuri, J. B., Ellis, M. J. and De Bank, P. A., 2011. Promotion of neurite outgrowth via incorporation of poly-L-lysine into aligned PLGA nanofibre scaffolds. European Cells and Materials, 22 (Supplement 3), p. 53.

Lam, A., Cao, X., Eisenthal, R. and Hubble, J., 2001. Effect of contact time and inhibitor concentration on the affinity mediated adsorption of cells to surfaces. Enzyme Microbial Technology, 29 (1), pp. 28-33.

Lamb, G. W. and Williams, J. M. J., 2008. Borrowing hydrogen - C - N bond formation from alcohols. Chimica Oggi-Chemistry Today, 26 May-Jun (3), pp. 17-19.

Lamb, G. W., Al Badran, F. A., Williams, J. M. J. and Kolaczkowski, S. T., 2010. Production of pharmaceuticals: amines from alcohols in a continuous flow fixed bed catalytic reactor. Chemical Engineering Research & Design, 88 (12), pp. 1533-1540.

Lamb, G. W., Watson, A. J. A., Jolley, K. E., Maxwell, A. C. and Williams, J. M., 2009. Borrowing hydrogen methodology for the conversion of alcohols into N-protected primary amines and in situ deprotection. Tetrahedron Letters, 50 (26), pp. 3374-3377.

Lambert, A., Plucinski, P. and Kozhevnikov, I., 2003. Polyoxometalate-catalysed epoxidation of 1-octene with hydrogen peroxide in microemulsions coupled with ultrafiltration. Chemical Communications, 6, pp. 714-715.

Lapkin, A., Bozkaya, B., Mays, T., Borello, L., Edler, K. and Crittenden, B. D., 2003. Preparation and characterization of heteropolyacids supported on synthetic mesoporous carbons and silica. Catalysis Today, 81, pp. 611-621.

Lapkin, A., Joyce, L. and Crittenden, B. D., 2004. A framework for evaluating the “greenness” of chemical processes, a case study of a novel VOC recovery technology,. Environmental Science and Technology, 38, pp. 5815-5823.

Lapkin, A. A., Adou, E., Mlambo, B. N., Chemat, S., Suberu, J., Collis, A. E. C., Clark, A. and Barker, G., 2014. Integrating medicinal plants extraction into a high-value biorefinery : an example of Artemisia annua L. Comptes Rendus Chimie, 17 (3), pp. 232-241.

Lapkin, A. A., Tennison, S. R. and Thomas, W. J., 2002. A porous carbon membrane reactor for the homogeneous catalytic hydration of propene. Chemical Engineering Science, 57 (13), pp. 2357-2369.

Lapkin, A., Boddu, V. M., Aliev, G. N., Goller, B., Polisski, S. and Kovalev, D., 2008. Photo-oxidation by singlet oxygen generated on nanoporous silicon in a LED-powered reactor. Chemical Engineering Journal, 136 (2-3), pp. 331-336.

Lapkin, A., Chen, H. and Ding, Y., 2009. Rheological behaviour of nanofluids containing tube / rod-like nanoparticles. Powder Technology, 194 (1-2), pp. 132-141.

Lapkin, A., Savill-Jowitt, C., Edler, K. and Brown, R., 2006. Microcalorimetric Study of Ammonia Chemisorption on H3PW12O40 Supported onto Mesoporous Synthetic Carbons and SBA-15. Langmuir, 22 (18), pp. 7664-7671.

Lapkin, A. A., Bozkaya, B. and Plucinski, P. K., 2006. Selective oxidation of 1-butene by molecular oxygen in a porous membrane Taylor flow reactor. Industrial & Engineering Chemistry Research, 45 (7), pp. 2220-2228.

Lapkin, A. A., Plucinski, P. K. and Cutler, M., 2006. Comparative Assessment of Technologies for Extraction of Artemisinin. Journal of Natural Products, 69 (11), pp. 1653-1664.

Lapkin, A. A., Walker, A., Sullivan, N., Khambay, B., Mlambo, B. and Chemat, S., 2009. Development of HPLC analytical protocols for quantification of artemisinin in biomass and extracts. Journal of Pharmaceutical and Biomedical Analysis, 49 (4), pp. 908-915.

Laska, U., Frost, C. G., Plucinski, P. K. and Price, G. J., 2008. Rhodium containing magnetic nanoparticles: effective catalysts for hydrogenation and the 1,4-addition of boronic acids. Catalysis Letters, 122 (1-2), pp. 68-75.

Laska, U., Frost, C. G., Price, G. J. and Plucinski, P. K., 2009. Easy-separable magnetic nanoparticle-supported Pd catalysts: Kinetics, stability and catalyst re-use. Journal of Catalysis, 268 (2), pp. 318-328.

Lau, A., Crittenden, B. D. and Field, R. W., 2004. Enhancement of liquid phase column performance by means of oscillatory flow: an experimental study. Separation and Purification Technology, 35, pp. 113-124.

Lawrence, R. M. H., Mays, T., Rigby, S., Walker, P. and D'Ayala, D., 2007. Effects of carbonation on the pore structure of non-hydraulic lime mortars. Cement and Concrete Research, 37 (7), pp. 1059-1069.

Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. Determination of carbonation profiles in non-hydraulic lime mortars using thermogravimetric analysis. Thermochimica Acta, 444 (2), pp. 179-189.

Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. The use of TG to measure different concentrations of lime in non-hydraulic lime mortars. Journal of Thermal Analysis and Calorimetry, 85 (2), pp. 377-382.

Le, C. D., Kolaczkowski, S. T. and McClymont, D. W. J., 2015. Using quadrupole mass spectrometry for on-line gas analysis - Gasification of biomass and refuse derived fuel. Fuel, 139, pp. 337-345.

Lee, K. P. and Mattia, D., 2013. Manufacturing of nanoemulsions using nanoporous anodized alumina membranes : Experimental investigation and process modeling. Industrial & Engineering Chemistry Research, 52 (42), pp. 14866-14874.

Lee, K. P., Arnot, T. C. and Mattia, D., 2011. A review of reverse osmosis membrane materials for desalination-development to date and future potential. Journal of Membrane Science, 370 (1-2), pp. 1-22.

Lee, K. P., Leese, H. and Mattia, D., 2012. Water flow enhancement in hydrophilic nanochannels. Nanoscale, 4 (8), pp. 2621-2627.

Lee, K. P. and Mattia, D., 2013. Monolithic nanoporous alumina membranes for ultrafiltration applications : Characterization, selectivity-permeability analysis and fouling studies. Journal of Membrane Science, 435, pp. 52-61.

Lee, L. Y., Perera, S. P., Crittenden, B. D. and Kolaczkowski, S. T., 2000. Manufacture and characterisation of silicalite monoliths. Adsorption Science & Technology, 18 (2), pp. 147-170.

Lee, Y. S., Lowe, J. P., Gilby, E., Perera, S. P. and Rigby, S. P., 2010. The initial release of cisplatin from poly(lactide-co-glycolide) microspheres. International Journal of Pharmaceutics, 383 (1-2), pp. 244-254.

Leese, H., Bhurtun, V., Lee, K.P. and Mattia, D., 2013. Wetting behaviour of hydrophilic and hydrophobic nanostructured porous anodic alumina. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 420, pp. 53-58.

Leese, H. and Mattia, D., 2014. Electroosmotic flow in nanoporous membranes in the region of electric double layer overlap. Microfluidics and Nanofluidics, 16 (4), pp. 711-719.

Legum, B., Cooper, R., Mattia, D., Gogotsi, Y. and Layton Bradley, E., 2007. The effect of deformation on room temperature Coulomb blockade using conductive carbon nanotubes. Engineering in Medicine and Biology Society (29th Annual International Conference of the IEEE), 2007, pp. 4206-10.

Lewandowski, M., Babu, G. S., Vezzoli, M., Jones, M. D., Owen, R. E., Mattia, D., Plucinski, P., Mikolajska, E., Ochenduszko, A. and Apperley, D. C., 2014. Investigations into the conversion of ethanol to 1,3-butadiene using MgO : SiO2 supported catalysts. Catalysis Communications, 49, pp. 25-28.

Lewis, W.J.T., Peck, O.P.W., Muir, A.C., John Chew, Y.M. and Bird, M.R., 2012. The fouling and cleaning of surfaces in the food sector. Food Science and Technology - London, 26 (4), pp. 30-32.

Lewis, W. J. T., Chew, Y. M. J. and Bird, M. R., 2012. The application of fluid dynamic gauging in characterising cake deposition during the cross-flow microfiltration of a yeast suspension. Journal of Membrane Science, 405-406, pp. 113-122.

Li, C., Zhang, R., Wang, L., Bowyer, A., Eisenthal, R., Shen, Y. and Hubble, J., 2013. Purification of lysozyme by intrinsically shielded hydrogel beads. Modern Physics Letters B, 27 (19), 1341028.

Li, Y. Y., Perera, S. P., Crittenden, B. D. and Bridgwater, J., 2001. The effect of the binder on the manufacture of a 5A zeolite monolith. Powder Technology, 116 (1), pp. 85-96.

Li, Y. Y., Perera, S. and Crittenden, B. D., 1998. Zeolite monoliths for air separation: part 1: manufacture and characterisation. Chemical Engineering Research & Design, 76 (8), pp. 921-930.

Licastro, F., Pedrini, S., Davis, L. J., Caputo, L., Tagliabue, J., Savorani, G., Cucinotta, D. and Annoni, G., 2001. Alpha-1-antichymotrypsin and oxidative stress in the peripheral blood from patients with probable Alzheimer disease: a short-term longitudinal study. Alzheimer Disease & Associated Disorders, 15 (1), pp. 51-5.

Lin, X., Telepeni, I., Blake, A. J., Dailly, A., Brown, C. M., Simmons, J. M., Zoppi, M., Walker, G. S., Thomas, K. M., Mays, T. J., Hubberstey, P., Champness, N. R. and Schroder, M., 2009. High capacity hydrogen adsorption in Cu(II) tetracarboxylate framework materials: the role of pore size, ligand functionalization, and exposed metal sites. Journal of the American Chemical Society, 131 (6), pp. 2159-2171.

Linkhorst, J. and Lewis, W. J. T., 2013. Workshop on membrane fouling and monitoring : a summary. Desalination and Water Treatment, 51 (31-33), pp. 6401-6406.

Lister, V. Y., Lucas, C., Gordon, P. W., Chew, Y. M. J. and Wilson, D. I., 2011. Pressure mode fluid dynamic gauging for studying cake build-up in cross-flow microfiltration. Journal of Membrane Science, 366 (1-2), pp. 304-313.

Liu, W., Howell, J. A., Arnot, T. C. and Scott, J. A., 2001. A novel extractive membrane bioreactor for treating biorefractory organic pollutants in the presence of high concentrations of inorganics: application to a synthetic acidic effluent containing high concentrations of chlorophenol and salt. Journal of Membrane Science, 181 (1), pp. 127-140.

Liu, Y., Withers, R., Ting, V. P., Fitzgerald, J. and Noren, L., 2006. Stacking fault disorder and its diffraction consequences in Ba3MNb2O9 (M=Co and Mn) 1:2 triple perovskites. Physica B: Condensed Matter, 385-386 (1), pp. 564-566.

Liu, Y., Withers, R. L., Whichello, A. P., Norén, L., Ting, V., Brink, F. and Fitz Gerald, J. D., 2005. A combined diffraction and dielectric properties investigation of Ba3MnNb2O9 complex perovskites. Journal of Solid State Chemistry, 178 (11), pp. 3389-3395.

Loponov, K., Goller, B., Moskalenko, A., Kovalev, D. and Lapkin, A., 2010. Efficiency of porous silicon photosensitizer in the singlet oxygen-mediated oxidation of organic compounds. Journal of Photochemistry and Photobiology A Chemistry, 211 (1), pp. 74-77.

Lukyanov, D. B. and Vazhnova, T., 2001. Dehydroisomerisation of n-butane into isobutene over Ga-containing zeolite catalysts. Special Publication - Royal Society of Chemistry, 266 (Supported Catalysts ), pp. 188-195.

Lukyanov, D. B. and Vazhnova, T., 2008. A kinetic study of benzene alkylation with ethane into ethylbenzene over bifunctional PtH-MFI catalyst. Journal of Catalysis, 257 (2), pp. 382-389.

Lukyanov, D. B. and Vazhnova, T., 2006. Active Sites in Working Bifunctional GaH-TON Aromatization Catalysts: Kinetic Evaluation. Journal of Physical Chemistry B, 110 (37), pp. 18473-18480.

Lukyanov, D. B. and Vazhnova, T., 2006. Aromatization activity of gallium containing MFI and TON zeolite catalysts in n-butane conversion: Effects of gallium and reaction conditions. Applied Catalysis A General, 316 (1), pp. 61-67.

Lukyanov, D. B. and Vazhnova, T., 2008. Highly selective and stable alkylation of benzene with ethane into ethylbenzene over bifunctional PtH-MFI catalysts. Journal of Molecular Catalysis A: Chemical, 279 (1), pp. 128-132.

Lukyanov, D. B. and Vazhnova, T., 2009. Selective and stable benzene alkylation with methane into toluene over PtH-MFI bifunctional catalyst. Journal of Molecular Catalysis A: Chemical, 305 (1-2), pp. 95-99.

Lukyanov, D. B. and Vazhnova, T., 2011. Transformation of methane over platinum supported catalysts at moderate temperature. Journal of Molecular Catalysis A: Chemical, 342-343, pp. 1-5.

Lukyanov, D. B., Beckett, S. J. and Vazhnova, T., 2012. Toward better understanding of the catalytic action of acidic zeolites: investigation in methane and ethane activation and transformation. ACS Catalysis, 2 (12), pp. 2596-2601.

M. Kabir, M., Forgacs, G. and Sárvári Horváth, I., 2013. Enhanced methane production from wool textile residues by thermal and enzymatic pretreatment. Process Biochemistry, 48 (4), pp. 575-580.

Ma, X., Balaban, M.O., Zhang, L., Patterson, E. E. and James, B., 2014. Quantification of pizza baking properties of different cheeses, and their correlation with cheese functionality. Journal of Food Science, 79 (8), E1528-E1534.

Ma, X., James, B., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2012. The stretchability of Mozzarella cheese evaluated by a temperature-controlled 3-prong hook test. Journal of Dairy Science, 95 (10), pp. 5561-5568.

Ma, X., James, B., Balaban, M. O., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2013. Quantifying blistering and browning properties of Mozzarella cheese. Part I : Cheese made with different starter cultures. Food Research International, 54 (1), pp. 912-916.

Ma, X., James, B., Balaban, M. O., Zhang, L. and Emanuelsson-Patterson, E. A. C., 2013. Quantifying blistering and browning properties of Mozzarella cheese. Part II : Cheese with different salt and moisture contents. Food Research International, 54 (1), pp. 917-921.

Macchietto, S., Hewitt, G. F., Coletti, F., Crittenden, B. D., Dugwell, D. R., Galindo, A., Jackson, G., Kandiyoti, R., Kazarian, S. G., Luckham, P. F., Matar, O. K., Millan-Agorio, M., Muller, E. A., Paterson, W., Pugh, S. J., Richardson, S. M. and Wilson, D. I., 2011. Fouling in crude oil preheat trains: a systematic solution to an old problem. Heat Transfer Engineering, 32 (3-4), pp. 197-215.

Mahy, W., Plucinski, P.K. and Frost, C.G., 2014. Copper-catalyzed one-pot synthesis of N-Aryl oxazolidinones from amino alcohol carbamates. Organic Letters, 16 (19), pp. 5020-5023.

Mangan, B. J., Muir, A. C. and Knight, J. C., 2010. Photonic bandgap fiber with multiple hollow cores. Journal of Lightwave Technology, 28 (9), pp. 1287-1290.

Manning, H. and Bird, M., 2014. Forthcoming. Gum arabic fractionation using synthetic membranes: The importance of fouling. Food and Bioproducts Processing

Mattia, D., Bau, H. H. and Gogotsi, Y., 2006. Wetting of CVD Carbon Films by Polar and Nonpolar Liquids and Implications for Carbon Nanopipes. Langmuir, 22 (4), pp. 1789-1794.

Mattia, D., Korneva, G., Sabur, A., Friedman, G. and Gogotsi, Y., 2007. Multifunctional Nanotubes with Nanoparticles Embedded in their Walls. Nanotechnology, 18, p. 155305.

Mattia, D., Rossi, M. P., Kim, B. M., Korneva, G., Bau, H. H. and Gogotsi, Y., 2006. Effect of Graphitization on the Wettability and Electrical Conductivity of CVD-Carbon Nanotubes and Films. Journal of Physical Chemistry B, 110 (20), pp. 9850-9855.

Mattia, D. and Calabrò, F., 2012. Explaining high flow rate of water in carbon nanotubes via solid-liquid molecular interactions. Microfluidics and Nanofluidics, 13 (1), pp. 125-130.

Mattia, D., Desmaison-Brut, M., Dimovski, S., Gogotsi, Y. and Desmaison, J., 2005. Oxidation behaviour of an aluminium nitride-hafnium diboride ceramic composite. Journal of the European Ceramic Society, 25 (10), pp. 1789-1796.

Mattia, D., Desmaison-Brut, M., Tetard, D. and Desmaison, J., 2005. Wetting of HIP AlN-TiB2 ceramic composites by liquid metals and alloys. Journal of the European Ceramic Society, 25 (10), pp. 1797-1803.

Mattia, D. and Gogotsi, Y., 2008. Review: Static and dynamic behavior of liquids inside carbon nanotubes. Microfluidics and Nanofluidics, 5 (3), pp. 289-305.

Mattia, D. and Gogotsi, Y., 2006. Surface functionalization to control the wetting behavior of nanostructured carbons. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, 51 (1), pp. 3-4.

Mattia, D., Korneva, G., Friedman, G. and Gogotsi, Y., 2007. Multifunctional Nanotubes with Particles Embedded in their Walls. Abstracts, 39th Middle Atlantic Regional Meeting of the American Chemical Society, Collegeville, PA, United States, May 16-18

Mattia, D., Lee, K. P. and Calabrò, F., 2014. Water permeation in carbon nanotube membranes. Current Opinion in Chemical Engineering, 4, pp. 32-37.

Mattia, D., Starov, V. and Semenov, S., 2012. Thickness, stability and contact angle of liquid films on and inside nanofibres, nanotubes and nanochannels. Journal of Colloid and Interface Science, 384 (1), pp. 149-156.

Mays, T. J., 2007. A new classification of pore sizes. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 57-62.

McConell, K., Jarman-Smith, M., Stewart, K. and Chaudhuri, J. B., 2004. Culture and meniscal chondrocytes on alginate hydrogel matrices. Food and Bioproducts Processing, 82 (C2), pp. 126-132.

McFarlane, C. J., Emanuelsson, E. A. C., Ali, A. M., Gao, W. and Patterson, D. A., 2010. Understanding the rate, mechanism and reuseability of zinc oxide nanostructured films as photocatalysts for industrial tastewater treatment. International Journal of Chemical Engineering, 2 (2), pp. 63-79.

McFetridge, P. S., Abe, K., Horrocks, M. and Chaudhuri, J. B., 2007. Vascular tissue engineering: Bioreactor design considerations for extended culture of primary human vascular smooth muscle cells. Asaio Journal, 53 Sep-Oct (5), pp. 623-630.

McFetridge, P. S., Chaudhuri, J. B., Howell, J. A., Bodamyali, T., Stevens, C. R. and Horrocks, M., 2001. Use of porcine collagen as a scaffold for a tissue engineered small diameter vascular graft. Abstracts of Papers of the American Chemical Society, 221, U146-U146.

McFetridge, P. S., Daniel, J. W., Bodamyali, T., Horrocks, M. and Chaudhuri, J. B., 2004. Preparation of porcine carotid arteries for vascular tissue engineering applications. Journal of Biomedical Materials Research, Part A, 70A (2), pp. 224-234.

McFetridge Peter, S., Bodamyali, T., Horrocks, M. and Chaudhuri, J. B., 2004. Endothelial and smooth muscle cell seeding onto processed ex vivo arterial scaffolds using 3D vascular bioreactors. Asaio Journal, 50 (6), pp. 591-600.

McLoughlin, M. J., Mays, T. J. and Price, R., 2005. Growth Spiral Activity and Step Velocities on a Crystal Surface. Physical Review Letters, 95 (11), 115504/1-115504/4.

Mellors, R., Benzeval, I., Eisenthal, R. and Hubble, J., 2010. Preparation of self-assembled microspheres and their potential for drug delivery. Pharmaceutical Development and Technology, 15 (1), pp. 105-111.

Meneghello, G., Parker, D. J., Ainsworth, B. J., Perera, S. P., Chaudhuri, J. B., Ellis, M. J. and De Bank, P. A., 2009. Fabrication and characterization of poly(lactic-co-glycolic acid)/polyvinyl alcohol blended hollow fibre membranes for tissue engineering applications. Journal of Membrane Science, 344 (1-2), pp. 55-61.

Meneghello, G., Storm, M., Chaudhuri, J., De Bank, P. and Ellis, M., 2014. An investigation into the stability of commercial versus MG63-derived hepatocyte growth factor under flow cultivation conditions. Biotechnology Letters

Meneghello, G., Ainsworth, B., De Bank, P., Ellis, M. J. and Chaudhuri, J., 2008. Effect of polyvinyl alcohol and sodium hypochlorite on porosity and mechanical properties of PLGA hollow fibre membrane scaffolds. European Cells and Materials, 16 (Supplement 3), p. 82.

Messaritaki, A., Black, S. J., van der Walle, C. F. and Rigby, S. P., 2005. NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres. Journal of Controlled Release, 108 (2-3), pp. 271-281.

Minett, D.R., O'Byrne, J.P., Pascu, S.I., Plucinski, P.K., Owen, R.E., Jones, M.D. and Mattia, D., 2014. Fe@CNT-monoliths for the conversion of carbon dioxide to hydrocarbons : Structural characterisation and Fischer-Tropsch reactivity investigations. Catalysis Science and Technology, 4 (9), pp. 3351-3358.

Minett, D. R., O'Byrne, J. P., Jones, M. D., Ting, V. P., Mays, T. J. and Mattia, D., 2013. One-step production of monolith-supported long carbon nanotube arrays. Carbon, 51 (1), pp. 327-334.

Ming, F., Howell, J., Acosta, F. and Hubble, J., 1993. Study on separation of conalbumin and lysozyme from high concentration fresh egg white at high flow rates by a novel ion-exchanger. Biotechnology and Bioengineering, 42 (9), pp. 1086-1090.

Moreno, T., Garcia-Serna, J., Plucinski, P., Sanchez-Montero, M. J. and Cocero, M. J., 2010. Direct synthesis of H2O2 in methanol at low pressures over Pd/C catalyst: Semi-continuous process. Applied Catalysis A General, 386 (1-2), pp. 28-33.

Morgan, S. M., Ainsworth, B. J., Kanczler, J. M., Babister, J. C., Chaudhuri, J. B. and Oreffo, R. O. C., 2009. Formation of a human-derived fat tissue layer in PDLLGA hollow fibre scaffolds for adipocyte tissue engineering. Biomaterials, 30 (10), pp. 1910-1917.

Morgan, S. M., Tilley, S., Perera, S., Ellis, M. J., Kanczler, J., Chaudhuri, J. B. and Oreffo, R. O. C., 2007. Expansion of human bone marrow stromal cells on poly-(lactide-co-glycolide) hollow fibers designed for use in skeletal tissue engineering. Biomaterials, 28 (35), pp. 5332-5343.

Muir, A. C., McKeown, P., Li, Y., Kobine, J. J. and Bird, M. R., 2013. The removal of food fat based soils during the washing of fabrics. Chemical Engineering Research & Design, 91 (9), pp. 1602-1613.

Nevell, J. M. and Perera, S. P., 2011. Novel adsorbent hollow fibres for oxygen concentration. Adsorption, 17 (1), pp. 273-283.

Nguyen, L. H., Vazhnova, T., Kolaczkowski, S. T. and Lukyanov, D. B., 2006. Combined experimental and kinetic modelling studies of the pathways of propane and n-butane aromatization over H-ZSM-5 catalyst. Chemical Engineering Science, 61 (17), pp. 5881-5894.

Nigo, R. Y., Chew, Y. M. J., Houghton, N. E., Paterson, W. R. and Wilson, D. I., 2009. Experimental studies of freezing fouling of model food fat solutions using a novel spinning disc apparatus. Energy & Fuels, 23 (12), pp. 6131-6145.

Noomrio, M. H., Zhang, R., Eisenthal, R. and Hubble, J., 2005. Characterisation of Hydrogel Gel Swelling by Molecular Exclusion. Biotechnology Letters, 27 (20), pp. 1587-1590.

Norén, L., Ting, V., Withers, R. L. and Van Tendeloo, G., 2001. An electron and x-ray diffraction investigation of Ni1+xTe2 and Ni1+xSe2CdI2/NiAs Type Solid Solution Phases. Journal of Solid State Chemistry, 161 (2), pp. 266-273.

Norén, L., Withers, R. L., Schmid, S., Brink, F. J. and Ting, V., 2006. Old friends in a new light: “SnSb” revisited. Journal of Solid State Chemistry, 179 (2), pp. 404-412.

O'Byrne, J., Owen, R., Minett, D., Pascu, S. I., Plucinski, P. K., Jones, M. D. and Mattia, D., 2013. High CO2 and CO conversion to hydrocarbons using bridged Fe nanoparticles on carbon nanotubes. Catalysis Science and Technology, 3 (5), pp. 1202-1207.

Ochońska, J., McClymont, D., Jodłowski, P.J., Knapik, A., Gil, B., Makowski, W., Łasocha, W., Kołodziej, A., Kolaczkowski, S. T. and Łojewska, J., 2012. Copper exchanged ultrastable zeolite Y - A catalyst for NH3-SCR of NOx from stationary biogas engines. Catalysis Today, 191 (1), pp. 6-11.

Odunsi, O. Y., He, Y. and Mays, T. J., 2007. Hydrogen storage in nanoporous carbon. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 423-430.

Oh, J. O., Kimb, G., Mattia, D. and Noh, H., 2011. A novel technique for fabrication of micro- and nanofluidic device with embedded single carbon nanotube. Sensors and Actuators B-Chemical, 154 (1), pp. 67-72.

Owen, R. E., O'Byrne, J. P., Mattia, D., Plucinski, P. K., Pascu, S. I. and Jones, M. D., 2013. Cobalt catalysts for the conversion of CO2 to light hydrocarbons at atmospheric pressure. Chemical Communications, 49 (99), pp. 11683-11685.

Owen, R. E., O'byrne, J. P., Mattia, D., Plucinski, P., Pascu, S. I. and Jones, M. D., 2013. Promoter effects on iron-silica Fischer-Tropsch nanocatalysts : Conversion of carbon dioxide to lower olefins and hydrocarbons at atmospheric pressure. ChemPlusChem, 78 (12), pp. 1536-1544.

Pabbruwe, M. B., Du, X., Stewart, K. and Chaudhuri, J. B., 2005. A comparison of microcarriers for the ex vivo expansion of ovine meniscal chondrocytes in the presence or absence of ascorbate-2-phosphate. International Journal of Experimental Pathology, 86 (3), A52-A53.

Pabbruwe, M. B., Stewart, K. and Chaudhuri, J. B., 2005. A Comparison of Colorimetric and DNA Quantification Assays for the Assessment of Meniscal Fibrochondrocyte Proliferation in Microcarrier Culture. Biotechnology Letters, 27 (19), pp. 1451-1455.

Patterson, D., 2003. Determination of best available techniques : methods and case examples. Filtration, 3 (1), pp. 12-17.

Patterson, D., Bowstead, M., Tran, A. and James, B. J., 2012. Towards continuous wine making : The optimization of mixed matrix membranes for wine fining. Procedia Engineering, 44, pp. 131-132.

Patterson, D. and Krohn, K., 2012. Determining wetted membrane microstructures using ESEM and DIC microscopy and their implications to membrane performance. Procedia Engineering, 44, pp. 1491-1493.

Patterson, D., Yenlau, L., Roengpithya, C., Gibbins, E. and Livingston, A., 2008. Membrane selectivity in the organic solvent nanofiltration of trialkylamine bases. Desalination, 218 (1-3), pp. 248-256.

Patterson, D. A., 2011. Impact of a multimedia laboratory manual: Investigating the influence of student learning styles on laboratory preparation and performance over one semester. Education for Chemical Engineers, 6 (1), e10-e30.

Patterson, D. A., Havill, A., Costello, S., See-Toh, Y. H., Livingston, A. G. and Turner, A., 2009. Membrane characterisation by SEM, TEM and ESEM: the implications of dry and wetted microstructure on mass transfer through integrally skinned polyimide nanofiltration membranes. Separation and Purification Technology, 66 (1), pp. 90-97.

Patterson, D. A., Metcalfe, I. S., Xiong, F. and Livingston, A. G., 2002. Biodegradability of linear alkylbenzene sulfonates subjected to wet air oxidation. Journal of Chemical Technology & Biotechnology, 77 (9), pp. 1039-1049.

Patterson, D. A., Metcalfe, I. S., Xiong, F. and Livingston, A. G., 2001. Wet Air Oxidation of Linear Alkylbenzene Sulfonate 1. Effect of Temperature and Pressure. Industrial & Engineering Chemistry Research, 40 (23), pp. 5507-5516.

Patterson, D. A., Metcalfe, I. S., Xiong, F. and Livingston, A. G., 2001. Wet Air Oxidation of Linear Alkylbenzene Sulfonate 2. Effect of pH. Industrial & Engineering Chemistry Research, 40 (23), pp. 5517-5525.

Patton, A., Crittenden, B. D. and Perera, S. P., 2004. The linear driving force approximation for monolithic adsorbents. Transactions of the Institute of Chemical Engineers: Part A, 82, pp. 999-1009.

Patton, A., Crittenden, B. D. and Perera, S. P., 2004. Use of the linear driving force approximation to guide the design of monolithic adsorbents. Chemical Engineering Research & Design, 82 (A8), pp. 999-1009.

Peralta, J. M., Chew, Y. M. J. and Wilson, D. I., 2011. An analytical method for selecting the optimal nozzle external geometry for fluid dynamic gauging. Chemical Engineering Science, 66 (16), pp. 3579-3591.

Peralta, J. M., Chew, Y. M. J. and Wilson, D. I., 2011. Effect of nozzle external geometry on the pressure and shear stress exerted on the surface being gauged in fluid dynamic gauging. Chemical Engineering Research & Design, 89 (12), pp. 2540-2551.

Pereira, M., Sharma, R. I., Penkala, R., Gentzel, T. A., Schwarzbauer, J. E. and Moghe, P. V., 2007. Engineered cell-adhesive nanoparticles nucleate extracellular matrix assembly. Tissue Engineering Parts A, B, & C, 13 (3), pp. 567-578.

Perera, S. P., Bridgewater, J., Li, Y.-Y. and Crittenden, B. D., 2001. Hybrid Membrane Adsorbents For Fluidised Bed Separation. Transactions of the Institute of Chemical Engineers: Part A, 79.

Perera, S., Jeffs, C., Smith, M. W., Stone, C. A. and Crittenden, B., 2013. Low pressure drop respirator gas filters using adsorbent hollow fibres as an alternative to granular adsorbents. Journal of the International Society for Respirator Protection, 30, pp. 12-29.

Perkins, E. L., Rigby, S. P., Edler, K. J. and Lowe, J., 2007. NMR cryoporometry and PFG studies of water diffusion in poly (lactic-co-glycolic acid) microspheres for drug delivery. Journal of Pharmacy and Pharmacology, 59, A17-A17.

Perkins, E., Lowe, J., Edler, K. and Rigby, S., 2010. Studies of structure-transport relationships in biodegradable polymer microspheres for drug delivery using NMR cryodiffusometry. Chemical Engineering Science, 65 (2), pp. 611-625.

Perkins, E. L., Lowe, J. P., Edler, K. J., Tanko, N. and Rigby, S. P., 2008. Determination of the percolation properties and pore connectivity for mesoporous solids using NMR cryodiffusometry. Chemical Engineering Science, 63 (7), pp. 1929-1940.

Phillips, W., Johnsen, T. E., Caldwell, N. and Chaudhuri, J. B., 2011. The difficulties of supplying new technologies into highly regulated markets: the case of tissue engineering. Technology Analysis and Strategic Management, 23 (3), pp. 213-226.

Pilkington, G. A., Thormann, E., Claesson, P. M., Fuge, G. M., Fox, O. J. L., Ashfold, M. N. R., Leese, H., Mattia, D. and Briscoe, W. H., 2011. Amontonian frictional behaviour of nanostructured surfaces. Physical Chemistry Chemical Physics, 13 (20), pp. 9318-9326.

Platt, S., Chaudhuri, J., Arnot, T. and Carpenter, K. J., 1997. Emulsion breakage using hydrophilic membranes as a coalescing aid. Acta Polytechnica Scandinavica. Chemical Technology and Metallurgy Series.

Plucinski, P., Bavykin, D., Kolaczkowski, S. and Lapkin, A., 2005. Liquid phase oxidation of organic feedstock in a compact multichannel reactor. Industrial & Engineering Chemistry Research, 44, pp. 9683-9690.

Plucinski, P. K., Bavykin, D. V., Kolaczkowski, S. T. and Lapkin, A. A., 2005. Application of a structured multifunctional reactor for the oxidation of a liquid organic feedstock. Catalysis Today, 105 (3-4), pp. 479-483.

Polisski, S., Goller, B., Lapkin, A., Fairclough, S. and Kovalev, D., 2008. Synthesis and catalytic activity of hybrid metal/silicon nanocomposites. Physica Status Solidi: Rapid Research Letters, 2 (3), pp. 132-134.

Polisski, S., Goller, B., Lapkin, A. and Kovalev, D., 2009. Hybrid metal/silicon nanocomposite systems and their catalytic activity. Physica Status Solidi (C), 6 (7), pp. 1575-1579.

Polisski, S., Goller, B., Wilson, K., Kovalev, D., Zaikowskii, V. and Lapkin, A., 2010. In situ synthesis and catalytic activity in CO oxidation of metal nanoparticles supported on porous nanocrystalline silicon. Journal of Catalysis, 271 (1), pp. 59-66.

Pound, J. C., Green, D. W., Chaudhuri, J. B., Roach, H. I. and Oreffo, R. O. C., 2006. Promotion of chondrogenesis and osteogenesis from mixed human mesenchymal progenitors within innovative polysaccharide capsules. Tissue Engineering, 12 (4), pp. 1030-1031.

Pound, J. C., Green, D. W., Chaudhuri, J. B., Mann, S., Roach, H. I. and Oreffo, R. O. C., 2006. Strategies to Promote Chondrogenesis and Osteogenesis from Human Bone Marrow Cells and Articular Chondrocytes Encapsulated in Polysaccharide Templates. Tissue Engineering, 12 (10), pp. 2789-2799.

Pourbafrani, M., Forgacs, G., Sárvári Horváth, I., Niklasson, C. and Taherzadeh, M. J., 2010. Production of biofuels, limonene and pectin from citrus wastes. Bioresource Technology, 101 (11), pp. 4246-4250.

Puértolas, B., Hill, A. K., García, T., Solsona, B. and Torrente-Murciano, L., 2014. Forthcoming. In-situ synthesis of hydrogen peroxide in tandem with selective oxidation reactions : a mini-review. Catalysis Today

Pérez Esteban, P., Alves, D., Enright, M. C., Bean, J. E., Gaudion, A., Jenkins, A. T. A., Young, A. E. R. and Arnot, T. C., 2014. Enhancement of the antimicrobial properties of bacteriophage-K via stabilisation using oil-in-water nano-emulsions. Biotechnology Progress, 30 (4), pp. 932-944.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2012. Effects of various polymerization techniques on PANI deposition at the surface of cellulose ester microporous membranes: XPS and electrical conductivity studies. Synthetic Metals, 162 (11-12), pp. 958-967.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2009. Control of polyaniline deposition on microporous cellulose ester membranes by in situ chemical polymerization. Journal of Physical Chemistry B, 113 (45), pp. 14986-14993.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2011. Membrane potential and impedance studies of polyaniline composite membranes: effects of membrane morphology. Journal of Membrane Science, 385-386, pp. 67-75.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2009. Polyaniline deposition site control on microporous mixed cellulose ester membranes : Surface and in-pore polymerization. IOP Conference Series: Materials Science and Engineering, 4, 012009.

Qaiser, A. A., Hyland, M. M. and Patterson, D. A., 2011. Surface and Charge Transport Characterization of Polyaniline−Cellulose Acetate Composite Membranes. Journal of Physical Chemistry B, 115 (7), pp. 1652-1661.

Quignon, B., Pilkington, G. A., Thormann, E., Claesson, P. M., Ashfold, M. N. R., Mattia, D., Leese, H., Davis, S. A. and Briscoe, W. H., 2013. Sustained frictional instabilities on nanodomed surfaces : Stick–slip amplitude coefficient. ACS Nano, 7 (12), pp. 10850-10862.

Quiñones, D.H., Rey, A., Álvarez, P.M., Beltrán, F.J. and Plucinski, P.K., 2014. Enhanced activity and reusability of TiO2 loaded magnetic activated carbon for solar photocatalytic ozonation. Applied Catalysis B: Environmental, 144 (1), pp. 96-106.

Ramirez-Canon, A., Miles, D. O., Cameron, P. J. and Mattia, D., 2013. Zinc oxide nanostructured films produced via anodization : A rational design approach. RSC Advances, 3 (47), pp. 25323-25330.

Rashidi, H., Ellis, M. J., Cartmell, S. H. and Chaudhuri, J. B., 2010. Simvastatin release from poly(lactide-co-glycolide) membrane scaffolds. Polymers, 2 (4), pp. 709-718.

Rathbone, R. R., Greaves, M., Xia, T. X. and WerfillI, M. S., 2002. Downhole Conversion of Lloydminster Heavy Oil Using THAI-CAPRI Process. Journal of Canadian Petroleum Engineers, 78998, pp. 1-16.

Ren, S. R., Greaves, M. and Rathbone, R. R., 2002. Air injection LTO process: an IOR technique for light-oil reservoirs. SPE Journal (Society of Petroleum Engineers), 7 (1), pp. 90-99.

Rey, A., Quinones, D. H., Alvarez, P. M., Beltran, F. J. and Plucinski, P. K., 2012. Simulated solar-light assisted photocatalytic ozonation of metoprolol over titania-coated magnetic activated carbon. Applied Catalysis B: Environmental, 111-112, pp. 246-253.

Reynolds, W., Plucinski, P. and Frost, C. G., 2014. Robust and reusable supported palladium catalysts for cross-coupling reactions in flow. Catalysis Science and Technology, 4 (4), pp. 948-954.

Rigby, S. P., Chigada, P. I., Evbuomvan, I. O., Chudek, J. A., Miri, T., Wood, J. and Bakalis, S., 2008. Experimental and modelling studies of the kinetics of mercury retraction from highly confined geometries during porosimetry in the transport and the quasi-equilibrium regimes. Chemical Engineering Science, 63 (24), pp. 5771-5788.

Rigby, S. P., Fairhead, M. and van der Walle, C. F., 2008. Engineering silica particles as oral drug delivery vehicles. Current Pharmaceutical Design, 14 (18), pp. 1821-1831.

Rigby, S. P. and Fletcher, R. S., 2004. Interfacing mercury porosimetry with nitrogen sorption. Particle & Particle Systems Characterization, 21, pp. 138-148.

Rigby, S. P., Watt-Smith, M. J. and Fletcher, R. S., 2005. Integrating gas sorption with mercury porosimetry. Adsorption, 11, pp. 201-206.

Rigby, S. P., 2003. A Model for the Surface Diffusion of Molecules on a Heterogeneous Surface. Langmuir, 19 (2), pp. 364-376.

Rigby, S. P., 2002. Fractal Theory for the Compensation Effect Observed in a Surface Diffusion Process Studied Using Deuteron NMR. Langmuir, 18 (5), pp. 1613-1618.

Rigby, S. P., 2002. New methodologies in mercury porosimetry. Studies in Surface Science and Catalysis, 144 (Characterization of ), pp. 185-192.

Rigby, S. P., 2005. Predicting surface diffusivities of molecules from equilibrium adsorption isotherms. Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 262 (1-3), pp. 139-149.

Rigby, S. P., 2003. Structure-transport relationships in the surface diffusion of molecules over heterogeneous surfaces within porous catalysts. Catalysis in Application [Papers presented at the International Symposium on Applied Catalysis]

Rigby, S. P., Barwick, D., Fletcher, R. S. and Riley, S. N., 2003. Interpreting mercury porosimetry data for catalyst supports using semi-empirical alternatives to the Washburn equation. Applied Catalysis A General, 238 (2), pp. 303-318.

Rigby, S. P., Beanlands, K., Evbuomwan, I. O., Watt-Smith, M. J., Edler, K. J. and Fletcher, R. S., 2004. Nanocasting of novel, designer-structured catalyst supports. Chemical Engineering Science, 59 (22-23), pp. 5113-5120.

Rigby, S. P. and Chigada, P. I., 2009. Interpretation of integrated gas sorption and mercury porosimetry studies of adsorption in disordered networks using mean-field DFT. Adsorption, 15 (1), pp. 31-41.

Rigby, S. P. and Chigada, P. I., 2010. MF-DFT and experimental investigations of the origins of Hysteresis in Mercury porosimetry of Silica materials. Langmuir, 26 (1), pp. 241-248.

Rigby, S. P., Chigada, P. I., Perkins, E. L., Watt-Smith, M. J., Lowe, J. P. and Edler, K. J., 2008. Fundamental studies of gas sorption within mesopores situated amidst an inter-connected, irregular network. Adsorption, 14 (2-3), pp. 289-307.

Rigby, S. P., Chigada, P. I., Wang, J., Wilkinson, S. K., Bateman, H., Al-Duri, B., Wood, J., Bakalis, S. and Miri, T., 2011. Improving the interpretation of mercury porosimetry data using computerised X-ray tomography and mean-field DFT. Chemical Engineering Science, 66 (11), pp. 2328-2339.

Rigby, S. P. and Daut, S., 2002. A statistical model for the heterogeneous structure of porous catalyst pellets. Advances in Colloid and Interface Science, 98 (2), pp. 87-119.

Rigby, S. P. and Edler, K. J., 2002. The influence of mercury contact angle, surface tension, and retraction mechanism on the interpretation of mercury porosimetry data. Journal of Colloid and Interface Science, 250 (1), pp. 175-190.

Rigby, S. P., Evbuomwan, I. O., Watt-Smith, M. J., Edler, K. and Fletcher, R. S., 2006. Using nano-cast model porous media and integrated gas sorption to improve fundamental understanding and data interpretation in mercury porosimetry. Particle & Particle Systems Characterization, 23 (1), pp. 82-93.

Rigby, S. P. and Fletcher, R. S., 2004. Experimental Evidence for Pore Blocking as the Mechanism for Nitrogen Sorption Hysteresis in a Mesoporous Material. Journal of Physical Chemistry B, 108 (15), pp. 4690-4695.

Rigby, S. P., Fletcher, R. S., Raistrick, J. H. and Riley, S. N., 2002. Characterisation of porous solids using a synergistic combination of nitrogen sorption, mercury porosimetry, electron microscopy and micro-focus X-ray imaging techniques. Physical Chemistry Chemical Physics, 4 (14), pp. 3467-3481.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2001. Characterization of Macroscopic Structural Disorder in Porous Media Using Mercury Porosimetry. Journal of Colloid and Interface Science, 240 (1), pp. 190-210.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2004. Characterization of porous solids using integrated nitrogen sorption and mercury porosimetry. Chemical Engineering Science, 59 (1), pp. 41-51.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2002. Determination of the Multiscale Percolation Properties of Porous Media Using Mercury Porosimetry. Industrial & Engineering Chemistry Research, 41 (5), pp. 1205-1226.

Rigby, S. P., Fletcher, R. S. and Riley, S. N., 2003. Determination of the cause of mercury entrapment during porosimetry experiments on sol-gel silica catalyst supports. Applied Catalysis A General, 247 (1), pp. 27-39.

Rigby, S. P., Van der Walle, C. F. and Raistrick, J. H., 2004. Determining drug spatial distribution within controlled delivery tablets using MFX imaging. Journal of Controlled Release, 96 (1), pp. 97-100.

Rigby, S. P., Watt-Smith, M. J., Chigada, P., Chudek, J. A., Fletcher, R. S., Wood, J., Bakalis, S. and Miri, T., 2006. Studies of the entrapment of non-wetting fluid within nanoporous media using a synergistic combination of MRI and micro-computed X-ray tomography. Chemical Engineering Science, 61 (23), pp. 7579-7592.

Rigby, S. P., Watt-Smith, M. J. and Fletcher, R. S., 2004. Simultaneous determination of the pore-length distribution and pore connectivity for porous catalyst supports using integrated nitrogen sorption and mercury porosimetry. Journal of Catalysis, 227 (1), pp. 68-76.

Rippington, S., Cunningham, D. and England, R., 2008. Structure and petrology of the Altan Uul ophiolite: new evidence for a Late Carboniferous suture in the Gobi Altai, southern Mongolia. Journal of the Geological Society, 165 (3), pp. 711-723.

Robinson, K., Ye, S., Yap, Y. and Kolaczkowski, S., 2013. Application of a methodology to assess the performance of a full-scale diesel oxidation catalyst during cold and hot start NEDC drive cycles. Chemical Engineering Research & Design, 91 (7), pp. 1292-1306.

Roengpithya, C., Patterson, D. A., Gibbins, E. J., Taylor, P. C. and Livingston, A. G., 2006. Investigation of the Compatibility of Racemization and Kinetic Resolution for the Dynamic Kinetic Resolution of an Allylic Alcohol. Industrial & Engineering Chemistry Research, 45 (21), pp. 7101-7109.

Roengpithya, C., Patterson, D. A., Livingston, A. G., Taylor, P. C., Irwin, J. L. and Parrett, M. R., 2007. Towards a continuous dynamic kinetic resolution of 1-phenylethylamine using a membrane assisted, two vessel process. Chemical Communications, 33, pp. 3462-3463.

Roengpithya, C., Patterson, D. A., Taylor, P. C. and Livingston, A. G., 2006. Development of stable organic solvent nanofiltration membranes for membrane enhanced dynamic kinetic resolution. Desalination, 199 (1-3), pp. 195-197.

Rohani, R., Hyland, M. and Patterson, D. A., 2011. A refined one-filtration method for aqueous based nanofiltration and ultrafiltration membrane molecular weight cut-off determination using polyethylene glycols. Journal of Membrane Science, 382 (1-2), pp. 278-290.

Rosalam, S. and England, R., 2006. Review of xanthan gum production from unmodified starches by Xanthomonas campestris sp. Enzyme Microbial Technology, 39 (2), pp. 197-207.

Rouquerol, J., Baron, G., Denoyel, R., Giesche, H., Groen, J., Klobes, P., Levitz, P., Neimark, A. V., Rigby, S., Skudas, R., Sing, K., Thommes, M. and Unger, K., 2012. Liquid intrusion and alternative methods for the characterization of macroporous materials (IUPAC Technical Report). Pure and Applied Chemistry, 84 (1), pp. 107-136.

Ruffino, L., Mann, R., Oldman, R. J., Rigby, S. and Allen, S., 2001. Using low melting point alloy intrusion to quantify pore structure: studies on an alumina support. Studies in Surface Science and Catalysis, 133, pp. 155-162.

Saffarzadeh-matin, S., Chuck, C. J., Kerton, F. M. and Rayner, C. M., 2004. Poly(dimethylsiloxane)-Derived Phosphine and Phosphinite Ligands: Synthesis, Characterization, Solubility in Supercritical Carbon Dioxide, and Sequestration on Silica. Organometallics, 23 (22), pp. 5176-5181.

Sahoo, P. K., Chew, Y. M. J., Mercade-Prieto, R., Wilson, D. I. and Dai, X. W., 2008. Fluid dynamic gauging studies of swelling behaviour of whey protein gels in NaOH/NaCl solutions. International Journal of Food Science and Technology, 43 (10), pp. 1901-1907.

Saidi, O., Bamford, M. J., Blacker, A. J., Lynch, J., Marsden, S. P., Plucinski, P., Watson, R. J. and Williams, J. M. J., 2010. Iridium-catalyzed formylation of amines with paraformaldehyde. Tetrahedron Letters, 51 (44), pp. 5804-5806.

Saidi, O., Blacker, A. J., Lamb, G. W., Marsden, S. P., Taylor, J. E. and Williams, J. M. J., 2010. Borrowing hydrogen in water and ionic liquids: iridium-catalyzed alkylation of amines with alcohols. Organic Process Research & Development, 14 (4), pp. 1046-1049.

Saikhwan, P., Mercade-Prieto, R., Chew, Y. M. J., Gunasekaran, S., Paterson, W. R. and Wilson, D. I., 2010. Swelling and dissolution in cleaning of whey protein gels. Food and Bioproducts Processing, 88 (C4), pp. 375-383.

Santomauro, F., Whiffin, F., Scott, R. J. and Chuck, C., 2014. Low-cost lipid production by an oleaginous yeast cultured in non-sterile conditions using model waste resources. Biotechnology for Biofuels, 7 (34), pp. 34-43.

Santomauro, F., Whiffin, F., Scott, R. J. and Chuck, C. J., 2014. Correction : low-cost lipid production by an oleaginous yeast cultured in non-sterile conditions using model waste resources. Biotechnology for Biofuels, 7 (1), 42.

Santori, F. and Hubble, J., 2003. Isocratic separation of monosaccharides using immobilized Concanavalin A. Journal of Chromatography A, 1003 (1-2), pp. 123-126.

Santori, F. and Hubble, J., 2005. Low affinity pair size exclusion chromatography. Separation Science and Technology, 40 (8), pp. 1733-1748.

Sarbatly, R. and England, R., 2004. Critical review of membrane bioreactor system used for continuous production of hydrolyzed starch. Chemical and Biochemical Engineering Quarterly, 18 (2), pp. 155-165.

Sarbatly, R., Krishnaiah, D. and England, R., 2007. Continuous recycle enzymatic membrane reactor system for in-situ production of pure and sterile glucose solution. Journal of Applied Sciences, 7 (15), pp. 2063-2068.

Sarbatly, R., Krishnaiah, D., England, R., Abang, S. and Jeffery, J., 2007. Comparison studies of applied pressure and concentration gradient driving forces in ceramic nano-filtration membrane for the production of intravenous salt solution. Journal of Applied Sciences, 7 (15), pp. 2069-2075.

Sargeant, L., 2013. Focus on the future. EPRSC Pioneer Magazine, 9, pp. 30-31.

Sargeant, L. A., Chuck, C. J., Donnelly, J., Bannister, C. D. and Scott, R. J., 2014. Optimizing the lipid profile, to produce either a palm oil or biodiesel substitute, by manipulation of the culture conditions for Rhodotorula glutinis. Biofuels, 5 (1), pp. 33-43.

Schmidtmann, M., Coster, P., Henry, P. F., Ting, V. P., Weller, M. T. and Wilson, C. C., 2014. Determining hydrogen positions in crystal engineered organic molecular complexes by joint neutron powder and single crystal X-ray diffraction. CrystEngComm, 16 (7), p. 1232.

Sciancalepore, A. G., Sallustio, F., Girardo, S., Passione, L. G., Camposeo, A., Mele, E., Di Lorenzo, M., Costantino, V., Schena, F. P. and Pisignano, D., 2014. A bioartificial renal tubule device embedding human renal stem/progenitor cells. PLoS ONE, 9 (1), e87496.

Scott, J. A., Howell, J., Arnot, T., Smith, K. L. and Bruska, M., 1996. Enhanced system k L a and permeate flux with a ceramic membrane bioreactor. Biotechnology Techniques, 10 (4), pp. 287-290.

Seo, Y. S., Shirley, A. and Kolaczkowski, S. T., 2002. Evaluation of thermodynamically favorable operating conditions for production of hydrogen in three different reforming technologies. Journal of Power Sources, 108 (1-2), pp. 213-225.

Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2011. Experimental optimization of catalytic process in situ for heavy-oil and bitumen upgrading. Journal of Canadian Petroleum Technology, 50 (11-12), pp. 33-47.

Shah, A., Fishwick, R., Wood, J., Leeke, G., Rigby, S. and Greaves, M., 2010. A review of novel techniques for heavy oil and bitumen extraction and upgrading. Energy & Environmental Science, 3 (6), pp. 700-714.

Shah, H. J., Fontecchio, A. K., Mattia, D. and Gogotsi, Y., 2008. Field controlled nematic-to-isotropic phase transition in liquid crystal-carbon nanotube composites. Journal of Applied Physics, 103 (6), 064314/1-064314/5.

Shah, H. J., Fontecchio, A. K., Rossi, M. P., Mattia, D. and Gogotsi, Y., 2006. Imaging of liquid crystals confined in carbon nanopipes. Applied Physics Letters, 89 (4), 043123/1-043123/3.

Shamiryan, D., Paraschiv, V., Eslava, S., Demand, M., Baklanov, M., Beckx, S. and Boullart, W., 2007. Profile control of novel non-Si gates using B Cl3 N2 plasma. Journal of Vacuum Science & Technology B, 25 (3), pp. 739-744.

Shariffuddin, J. H., Jones, M. I. and Patterson, D. A., 2013. Greener photocatalysts : Hydroxyapatite derived from waste mussel shells for the photocatalytic degradation of a model azo dye wastewater. Chemical Engineering Research & Design, 91 (9), pp. 1693-1704.

Shariki, S., Cox, O.T.L., Tickell, D.A., James, T.D., Dale, S.E.C., Marken, F., Pereira Morais, M.P., Van Den Elsen, J.M.H. and Bending, S., 2012. Coil-by-coil assembly of poly[acrylamide-co-3-(methacryl-amido)- phenylboronic acid] with polydiallyldimethyl-ammonium to give alizarin red S responsive films. Journal of Materials Chemistry, 22 (36), pp. 18999-19006.

Sharma, R. I., Kohn, J. and Moghe, P. V., 2004. Poly(ethylene glycol) enhances cell motility on protein-based poly(ethylene glycol)-polycarbonate substrates : A mechanism for cell-guided ligand remodeling. Journal of Biomedical Materials Research - Part A, 69 (1), pp. 114-123.

Sharma, R. I., Pereira, M., Schwarzbauer, J. E. and Moghe, P. V., 2006. Albumin-derived nanocarriers : Substrates for enhanced cell adhesive ligand display and cell motility. Biomaterials, 27 (19), pp. 3589-3598.

Sharma, R. I., Schwarzbauer, J. E. and Moghe, P. V., 2011. Nanomaterials can dynamically steer cell responses to biological ligands. Small, 7 (2), pp. 242-251.

Sharma, R. I., Shreiber, D. I. and Moghe, P. V., 2008. Nanoscale variation of bioadhesive substrates as a tool for engineering of cell matrix assembly. Tissue Engineering Part A, 14 (7), pp. 1237-1250.

Sharma, R. I. and Snedeker, J. G., 2010. Biochemical and biomechanical gradients for directed bone marrow stromal cell differentiation toward tendon and bone. Biomaterials, 31 (30), pp. 7695-7704.

Sharma, R. I. and Snedeker, J. G., 2012. Paracrine interactions between mesenchymal stem cells affect substrate driven differentiation toward tendon and bone phenotypes. PLoS ONE, 7 (2), e31504.

Sharma, S.K., Lynch, J., Sobolewska, A.M., Plucinski, P., Watson, R.J. and Williams, J. M. J., 2013. Pt/C catalysed direct reductive amination of nitriles with primary amines in a continuous flow multichannel microreactor. Catalysis Science and Technology, 3 (1), pp. 85-88.

Sharma, S. K., Bishopp, S. D., Allen, C. L., Lawrence, R., Bamford, M. J., Lapkin, A. A., Plucinski, P., Watson, R. J. and Williams, J. M. J., 2011. Copper-catalyzed rearrangement of oximes into primary amides. Tetrahedron Letters, 52 (33), pp. 4252-4255.

Sharma, S. K., Sidhpuria, K. B. and Jasra, R. V., 2011. Ruthenium containing hydrotalcite as a heterogeneous catalyst for hydrogenation of benzene to cyclohexane. Journal of Molecular Catalysis A: Chemical, 335 (1-2), pp. 65-70.

Sharpe, J., Bimbo, N., Ting, V., Burrows, A., Jiang, D. and Mays, T., 2013. Supercritical hydrogen adsorption in nanostructured solids with hydrogen density variation in pores. Adsorption, 19 (2-4), pp. 643-652.

Sharpe, J., Bimbo, N., Ting, V. P., Rechain, B., Joubert, E. and Mays, T. J., 2014. Forthcoming. Modelling the potential of adsorbed hydrogen for use in aviation. Microporous and Mesoporous Materials

Shearer, H., Ellis, M. J., Perera, S. P. and Chaudhuri, J. B., 2006. Effects of common sterilization methods on the structure and properties of poly(D,L lactic-co-glycolic acid) scaffolds. Tissue Engineering, 12 (10), pp. 2717-2727.

Shiko, E., Edler, K.J., Lowe, J.P. and Rigby, S.P., 2012. Probing the impact of advanced melting and advanced adsorption phenomena on the accuracy of pore size distributions from cryoporometry and adsorption using NMR relaxometry and diffusometry. Journal of Colloid and Interface Science, 385 (1), pp. 183-192.

Shiko, E., Edler, K. J., Lowe, J. P. and Rigby, S. P., 2013. Probing hysteresis during sorption of cyclohexane within mesoporous silica using NMR cryoporometry and relaxometry. Journal of Colloid and Interface Science, 398, pp. 168-175.

Shipley, R. J., Davidson, A. J., Chan, K., Chaudhuri, J. B., Waters, S. L. and Ellis, M. J., 2011. A strategy to determine operating parameters in tissue engineering hollow fiber bioreactors. Biotechnology and Bioengineering, 108 (6), pp. 1450-1461.

Shipley, R. J. and Ellis, M. J., 2009. Characterization of fluid and protein transport properties in hollow fibre membrane scaffolds. European Cells and Materials, 18 (Supplement 2), p. 40.

Shipley, R. J. and Ellis, M. J., 2009. PLGA hollow fibre membrane scaffolds and serum protein interactions. European Cells and Materials, 18 (Supplement 2), p. 62.

Shipley, R. J., Waters, S. L. and Ellis, M. J., 2010. Definition and validation of operating equations for poly(vinyl alcohol)-poly(lactide-co-glycolide) microfiltration membrane-scaffold bioreactors. Biotechnology and Bioengineering, 107 (2), pp. 382-392.

Shipley, R. J., Waters, S. L. and Ellis, M. J., 2011. Fluid and mass transport modelling to drive the design of cell-packed hollow fibre bioreactors. European Cells and Materials, 22 (Supplement 3), p. 72.

Siemieniec, J., Kafarski, P. and Plucinski, P. K., 2013. Hydrophosphonylation of nanoparticle Schiff Bases as a mean for preparation of aminophosphonate-functionalized nanoparticles. Molecules, 18 (7), pp. 8473-8484.

Sima-Ella, E. and Mays, T. J., 2005. Analysis of the oxidation reactivity of carbonaceous materials using thermogravimetric analysis. Journal of Thermal Analysis and Calorimetry, 80 (1), pp. 109-113.

Sima-Ella, E., Yuan, G. and Mays, T., 2005. A simple kinetic analysis to determine the intrinsic reactivity of coal chars. Fuel, 84 (14-15), pp. 1920-1925.

Sinha, S., Pia Rossi, M., Mattia, D., Gogotsi, Y. and Bau, H. H., 2007. Induction and measurement of minute flow rates through nanopipes. Physics of Fluids, 19 (1), 013603/1-013603/8.

Skouteris, G., Arnot, T., Jraou, M., Feki, F. and Sayadi, S., 2014. Modelling energy consumption in membrane bioreactors for waste water treatment in North Africa. Water Environment Research, 86 (3), pp. 232-244.

Skouteris, G., Arnot, T. C., Feki, F., Jraou, M. and Sayadi, S., 2012. Operation of a submerged aerobic membrane bioreactor for decentralised municipal wastewater treatment in North Africa. Water Practice & Technology, 7 (3).

Smith, M., McFetridge, P., Bodamyali, T., Chaudhuri, J. B., Howell, J. A., Stevens, C. R. and Horrocks, M., 2000. Porcine-derived collagen as a scaffold for tissue engineering. Food and Bioproducts Processing, 78 (C1), pp. 19-24.

Smith-Badorf, H. D., Chuck, C.J., Mokebo, K.R., MacDonald, H., Davidson, M.G. and Scott, R.J., 2013. Bioprospecting the thermal waters of the Roman Baths : Isolation of oleaginous species and analysis of the FAME profile for biodiesel production. AMB Express, 3 (1), 9.

Somphon, W., Ting, V., Liu, Y., Withers, R. L., Zhou, Q. and Kennedy, B. J., 2006. Local crystal chemistry, structured diffuse scattering and the dielectric properties of (Bi1−xYx)2(MIIINbV)O7 (M=Fe3+, In3+) Bi-pyrochlores. Journal of Solid State Chemistry, 179 (8), pp. 2495-2505.

Stewart, K., Pabbruwe, M., Dickinson, S., Hollander, A. P. and Chaudhuri, J. B., 2007. The effect of growth factor treatment on meniscal chondrocyte proliferation and differentiation on polyglycolic acid scaffolds. Tissue Engineering, 13 (2), pp. 271-280.

Storm, M.P., Kumpfmueller, B., Bone, H.K., Buchholz, M., Sanchez Ripoll, Y., Chaudhuri, J.B., Niwa, H., Tosh, D. and Welham, M.J., 2014. Zscan4 is regulated by PI3-kinase and DNA-damaging agents and directly interacts with the transcriptional repressors LSD1 and CtBP2 in mouse embryonic stem cells. PLoS ONE, 9 (3).

Storm, M. P., Orchard, C. B., Bone, H. K., Chaudhuri, J. B. and Welham, M. J., 2010. Three-dimensional culture systems for the expansion of pluripotent embryonic stem cells. Biotechnology and Bioengineering, 107 (4), pp. 683-695.

Sytniewski, L. J., Lapkin, A. A., Stepanov, S. and Wang, W. N., 2008. CFD optimisation of up-flow vertical HVPE reactor for GaN growth. Journal of Crystal Growth, 310 (14), pp. 3358-3365.

Tang, M., Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2003. A reversible hydrogel membrane for controlling the delivery of macromolecules. Biotechnology and Bioengineering, 82 (1), pp. 47-53.

Tang, M., Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2004. NAD-sensitive hydrogel for the release of macromolecules. Biotechnology and Bioengineering, 87 (6), pp. 791-796.

Tare, R. S., Forsey, R. W., Chaudhuri, J. B. and Oreffo, R. O. C., 2007. Engineering cartilaginous explants using human stro-1+progenitors, alginate scaffolds and perfusion bioreactors. Tissue Engineering, 13 (7), p. 1688.

Taylor, P. C., Livingston, A. G., Gibbins, E. J., Irwin, J. L., Muir, J. C., Patterson, D. A. and Roengpithya, C., 2005. An Improved Protocol for the Synthesis and Nanofiltration of Kim and Park’s Aminocyclopentadienyl Ruthenium Chloride Racemisation Catalyst. Synlett, 2005 (19), pp. 2993-2995.

Teghammar, A., Forgács, G., Sárvári Horváth, I. and Taherzadeh, M. J., 2014. Techno-economic study of NMMO pretreatment and biogas production from forest residues. Applied Energy, 116, pp. 125-133.

Ting, V., Liu, Y., Norén, L., Withers, R. L., Goossens, D. J., James, M. and Ferraris, C., 2004. A structure, conductivity and dielectric properties investigation of A3CoNb2O9 (A=Ca2+, Sr2+, Ba2+) triple perovskites. Journal of Solid State Chemistry, 177 (12), pp. 4428-4442.

Ting, V., Liu, Y. and Withers, R., 2006. A temperature-dependent structural investigation of electrical transitions in A3conb2o9 perovskites (A=Ca2+, Sr2+, Ba2+). Physica B Condensed Matter, 385-386 (1), pp. 558-560.

Ting, V., Liu, Y., Withers, R. L. and Krausz, E., 2004. An electron diffraction and bond valence sum study of the space group symmetries and structures of the photocatalytic 1:1 ordered A2InNbO6 double perovskites (A=Ca2+, Sr2+, Ba2+). Journal of Solid State Chemistry, 177 (3), p. 979.

Ting, V., Liu, Y., Withers, R. L. and Norén, L., 2004. An electron diffraction and bond valence sum study of the space group symmetries and structures of the photocatalytic 1:2 B site ordered A3CoNb2O9 perovskites (A=Ca2+, Sr2+, Ba2+). Journal of Solid State Chemistry, 177 (7), pp. 2295-2304.

Ting, V., Liu, Y., Withers, R. L., Norén, L., James, M. and Fitz Gerald, J. D., 2006. A structure and phase analysis investigation of the “1:1” ordered A2InNbO6 perovskites (A=Ca2+, Sr2+, Ba2+). Journal of Solid State Chemistry, 179 (2), pp. 551-562.

Ting, V. P., Henry, P. F., Kohlmann, H., Wilson, C. C. and Weller, M. T., 2010. Structural isotope effects in metal hydrides and deuterides. Physical Chemistry Chemical Physics, 12 (9), pp. 2083-2088.

Ting, V. P., Henry, P. F., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2009. In situ neutron powder diffraction and structure determination in controlled humidities. Chemical Communications, 2009 (48), pp. 7527-7529.

Ting, V. P., Henry, P. F., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2012. Probing hydrogen positions in hydrous compounds : information from parametric neutron powder diffraction studies. Physical Chemistry Chemical Physics, 14 (19), pp. 6914-6921.

Ting, V. P., Schmidtmann, M., Henry, P. F., Dann, S. E., Crisp, J. L., Wilson, C. C. and Weller, M. T., 2010. The kinetics of bulk hydration of the disaccharides α-lactose and trehalose by in situ neutron powder diffraction. MedChemComm, 1 (5), pp. 345-348.

Ting, V. P., Schmidtmann, M., Wilson, C. C. and Weller, M. T., 2010. Cisplatin: polymorphism and structural insights into an important chemotherapeutic drug. Angewandte Chemie-International Edition, 49 (49), pp. 9408-9411.

Torrente Murciano, L., Mattia, D., Jones, M. D. and Plucinski, P. K., 2014. Formation of hydrocarbons via CO2 hydrogenation - A thermodynamic study. Journal of CO2 Utilization, 6, pp. 34-39.

Torrente Murciano, L., Gilbank, A., Puertolas, B., Garcia, T., Solsona, B. and Chadwick, D., 2013. Shape-dependency activity of nanostructured CeO in the total oxidation of polycyclic aromatic hydrocarbons. Applied Catalysis B: Environmental, 132-133, pp. 116-122.

Torrente Murciano, L., Lapkin, A., Bavykin, D., Walsh, F. and Wilson, K., 2007. Highly selective Pd/titanate nanotube catalysts for the double-bond migration reaction. Journal of Catalysis, 245 (2), pp. 272-278.

Torrente Murciano, L., White, V., Petrocelli, F. and Chadwick, D., 2011. Sour compression process for the removal of SOx and NOx from oxyfuel-derived CO2. Energy Procedia, 4, pp. 908-916.

Torrente-Murciano, L., Lapkin, A., Nielsen, D. J., Fallis, I. and Cavell, K. J., 2010. Telomerisation of long-chain dienes with alcohols using Pd(IMes)(dvds) catalyst. Green Chemistry, 12 (5), pp. 866-869.

Torrente-Murciano, L., Lapkin, A. A. and Chadwick, D., 2010. Synthesis of high aspect ratio titanate nanotubes. Journal of Materials Chemistry, 20 (31), pp. 6484-6489.

Tran, A. T. T., Patterson, D. A. and James, B. J., 2012. Investigating the feasibility of using polysulfone-montmorillonite composite membranes for protein adsorption. Journal of Food Engineering, 112 (1-2), pp. 38-49.

Turta, A. T., Singhal, A. K., Xia, T. X., Greaves, M., Goldman, J. and Ivory, J., 2009. Preliminary considerations on application of steamflooding in a toe-to-heel configuration. Journal of Canadian Petroleum Technology, 48 (11), pp. 41-50.

Vaisanen, P., Bird, M. R. and Nystrom, M., 2002. Treatment of UF membranes with simple and formulated cleaning agents. Food and Bioproducts Processing, 80 (C2), pp. 98-108.

Vazhnova, T. and Lukyanov, D. B., 2013. Fourier self-deconvolution of the IR spectra as a tool for investigation of distinct functional groups in porous materials : Brønsted acid sites in zeolites. Analytical Chemistry, 85 (23), pp. 11291-11296.

Vazhnova, T., Rigby, S. P. and Lukyanov, D. B., 2013. Benzene alkylation with ethane in ethylbenzene over a PtH-MFI catalyst : Kinetic and IR investigation of the catalyst deactivation. Journal of Catalysis, 301, pp. 125-133.

Vidal, L., Chisvert, A., Canals, A., Psillakis, E., Lapkin, A. A., Acosta, F., Edler, K. J., Holdaway, J. A. and Marken, F., 2008. Chemically surface-modified carbon nanoparticle carrier for phenolic pollutants: Extraction and electrochemical determination of benzophenone-3 and triclosan. Analytica Chimica Acta, 616 (1), pp. 28-35.

Wagner, J., Ting, V. and Chuck, C., 2014. Catalytic cracking of sterol-rich yeast lipid. Fuel, 130, pp. 315-323.

Walsh, F. C., Bavykin, D. V., Torrente Murciano, L., Lapkin, A. A. and Cressey, B. A., 2006. Synthesis of novel composite materials via the deposition of precious metals onto protonated titanate (TiO2) nanotubes. Transactions of the Institute of Metal Finishing, 84 (6), pp. 293-299.

Wang, J., Hassan, F., Chigada, P. I., Rigby, S. P., Al-Duri, B. and Wood, J., 2009. Coke Formation and Characterization During 1-Hexene Isomerization and Oligomerization over H-ZSM-5 Catalyst under Supercritical Conditions. Industrial & Engineering Chemistry Research, 48 (17), pp. 7899-7909.

Wang, L., Zhang, R., Eisenthal, R. and Hubble, J., 2006. An intrinsically shielded hydrogel for the adsorptive recovery of lysozyme. Biotechnology and Applied Biochemistry, 45 (1), pp. 37-42.

Wanga, J., Chigada, P. I., Rigby, S. P., Al-Duri, B. and Wood, J., 2009. Prolonging catalyst lifetime in supercritical isomerization of 1-hexene over a platinum/alumina catalyst. Chemical Engineering Science, 64 (15), pp. 3427-3436.

Watt-Smith, M. J., Friedrich, J. M., Rigby, S., Ralph, T. R. and Walsh, F. C., 2008. Determination of the electrochemically active surface area of Pt/C PEM fuel cell electrodes using different adsorbates. Journal of Physics D: Applied Physics, 41 (17), 174004.

Watt-Smith, M. J., Rigby, S., Ralph, T. R. and Walsh, F. C., 2008. Characterisation of porous carbon electrode materials used in proton exchange membrane fuel cells via gas adsorption. Journal of Power Sources, 184 (1), pp. 29-37.

Watt-Smith, M. J., Edler, K. J. and Rigby, S. P., 2005. An Experimental Study of Gas Adsorption on Fractal Surfaces. Langmuir, 21 (6), pp. 2281-2292.

Watt-Smith, M. J., Kolaczkowski, S. T., Rigby, S. P. and Chudek, J. A., 2006. Prediction of gas sorption kinetics for porous media using MRI. AIChE Journal, 52 (9), pp. 3278-3289.

Watt-Smith, M. J., Rigby, S. P., Chudek, J. A. and Fletcher, R. S., 2007. Simulation of mercury porosimetry using MRI images of porous media. Studies in Surface Science and Catalysis, 160 (Characterization of ), pp. 177-184.

Watt-Smith, M. J., Rigby, S. P., Chudek, J. A. and Fletcher, R. S., 2006. Simulation of Nonwetting Phase Entrapment within Porous Media Using Magnetic Resonance Imaging. Langmuir, 22 (11), pp. 5180-5188.

Weis, A. and Bird, M. R., 2001. The influence of multiple fouling and cleaning cycles upon the membrane processing of lignosulphonates. Food and Bioproducts Processing, 79 (C3), pp. 184-187.

Weis, A., Bird, M. R. and Nystrom, M., 2003. The chemical cleaning of polymeric UF membranes fouled with spent sulphite liquor over multiple operational cycles. Journal of Membrane Science, 216 (1-2), pp. 67-79.

Weis, A., Bird, M. R., Nystrom, M. and Wright, C., 2005. The influence of morphology, hydrophobicity and charge upon the long-term performance of ultrafiltration membranes fouled with spent sulphite liquor. Desalination, 175 (1), pp. 73-85.

Weller, M. T., Henry, P. F., Ting, V. P. and Wilson, C. C., 2009. Crystallography of hydrogen-containing compounds: realizing the potential of neutron powder diffraction. Chemical Communications, 2009 (21), pp. 2973-2989.

Wery, N., Gerike, U., Sharman, A., Chaudhuri, J. B., Hough, D. W. and Danson, M. J., 2003. Use of a packed-column bioreactor for isolation of diverse protease-producing bacteria from antarctic soil. Applied and Environmental Microbiology, 69 (3), pp. 1457-1464.

White, J.R., Price, G.J., Plucinski, P.K. and Frost, C.G., 2009. The rhodium-catalysed 1,2-addition of arylboronic acids to aldehydes and ketones with sulfonated S-Phos. Tetrahedron Letters, 50 (52), pp. 7365-7368.

White, J. R., Price, G. J., Schiffers, S., Raithby, P. R., Plucinski, P. K. and Frost, C. G., 2010. A modular approach to catalytic synthesis using a dual-functional linker for Click and Suzuki coupling reactions. Tetrahedron Letters, 51 (30), pp. 3913-3917.

White, V., Torrente Murciano, L., Sturgeon, D. and Chadwick, D., 2010. Purification of oxyfuel-derived CO(2). International Journal of Greenhouse Gas Control, 4 (2), pp. 137-142.

White, V., Torrente-Murciano, L., Sturgeon, D. and Chadwick, D., 2009. Purification of oxyfuel-derived CO2. Energy Procedia, 1 (1), pp. 399-406.

Whittaker, R. J., Booth, R., Dyson, R., Bailey, C., Parsons Chini, L., Naire, S., Payvandi, S., Rong, Z., Woollard, H., Cummings, L. J., Waters, S. L., Mawasse, L., Chaudhuri, J. B., Ellis, M. J., Michael, V., Kuiper, N. J. and Cartmell, S., 2009. Mathematical modelling of fibre-enhanced perfusion inside a tissue-engineering bioreactor. Journal of Theoretical Biology, 256 (4), pp. 533-546.

Willcocks, A. M., Gilbank, A., Richards, S. P., Brayshaw, S. K., Kingsley, A. J., Odedra, R. and Johnson, A. L., 2011. Synthesis and structure of 6-aminofulvene-2-aldiminate complexes. Inorganic Chemistry, 50 (3), pp. 937-948.

Williams, D. P., Shipley, R., Ellis, M. J., Webb, S., Ward, J., Gardner, I. and Creton, S., 2013. Novel in vitro and mathematical models for the prediction of chemical toxicity. Chemical Research in Toxicology, 2 (1), pp. 40-59.

Williams, G. R., Kolaczkowski, S. T. and Plucinski, P., 2003. Catalyst instabilities during the liquid phase partial oxidation of methane. Catalysis Today, 81 (4), pp. 631-640.

Wills, K. A., Mandujano-ramírez, H. J., Merino, G., Mattia, D., Hewat, T., Robertson, N., Oskam, G., Jones, M. D., Lewis, S. E. and Cameron, P. J., 2013. Investigation of a copper(i) biquinoline complex for application in dye-sensitized solar cells. RSC Advances, 3 (45), pp. 23361-23369.

Wilson, C.C., Henry, P.F., Schmidtmann, M., Ting, V.P., Williams, E. and Weller, M.T., 2014. Neutron powder diffraction : New opportunities in hydrogen location in molecular and materials structure. Crystallography Reviews, 20 (3), pp. 162-206.

Wong, K. S., Vazhnova, T., Rigby, S. P. and Lukyanov, D. B., 2013. Temperature effects in benzene alkylation with ethane into ethylbenzene over a PtH-MFI bifunctional catalyst. Applied Catalysis A General, 454, pp. 137-144.

Wood, A.J., Fraser, J.D., Swift, S., Patterson-Emanuelson, E. A. C., Amirapu, S. and Douglas, R.G., 2012. Intramucosal bacterial microcolonies exist in chronic rhinosinusitis without inducing a local immune response. American Journal of Rhinology and Allergy, 26 (4), pp. 265-270.

Wright, B., De Bank, P. A., Luetchford, K. A., Acosta, F. R. and Connon, C. J., 2014. Oxidised alginate hydrogels as niche environments for corneal epithelial cells. Journal of Biomedical Materials Research, Part A, 102 (10), pp. 3393-3400.

Wu, C., Leese, H.S., Mattia, D., Dagastine, R.R., Chan, D.Y.C. and Tabor, R.F., 2013. Study of fluid and transport properties of porous anodic aluminum membranes by dynamic atomic force microscopy. Langmuir, 29 (28), pp. 8969-8977.

Wu, D. and Bird, M. R., 2007. The fouling and cleaning of ultrafiltration membranes during the filtration of model tea component solutions. Journal of Food Process Engineering, 30 (3), pp. 293-323.

Wu, D. and Bird, M. R., 2010. The interaction of protein and polyphenol species in ready to drink black tea liquor production. Journal of Food Process Engineering, 33 (3), pp. 481-505.

Wu, P., Brisdon, B. J., England, R. and Field, R. W., 2002. Preparation of modified difunctional PDMS membranes and a comparative evaluation of their performance for the pervaporative recovery of p-cresol from aqueous solution. Journal of Membrane Science, 206 (1-2), pp. 265-275.

Wu, P., Field, R. W., Brisdon, B. J., England, R. and Barkley, S. J., 2001. Optimization of organofunction PDMS membranes for the pervaporative recovery of phenolic compounds from aqueous streams. Separation and Purification Technology, 22 and 23 (1-3), pp. 339-345.

Wu, P., Field, R. W., England, R. and Brisdon, B. J., 2001. A fundamental study of organofunctionalised PDMS membranes for the pervaporative recovery of phenolic compounds from aqueous streams. Journal of Membrane Science, 190 (2), pp. 147-157.

Wu, X., Jones, M. D., Davidson, M. G., Chaudhuri, J. B. and Ellis, M. J., 2011. Surfactant-free poly(lactide-co-glycolide) honeycomb films for tissue engineering: relating solvent, monomer ratio and humidity to scaffold structure. Biotechnology Letters, 33 (2), pp. 423-430.

Wung, N., Acott, S. M., Tosh, D. and Ellis, M. J., 2014. Hollow fibre membrane bioreactors for tissue engineering applications. Biotechnology Letters

Xia, T. X. and Greaves, M., 2002. 3D physical model studies of downhole catalytic upgrading of Wolf Lake heavy oil using THAI. Journal of Canadian Petroleum Technology, 41 (8), pp. 58-64.

Xia, T. X. and Greaves, M., 2006. In situ upgrading of Athabasca Tar Sand bitumen using THAI. Chemical Engineering Research & Design, 84 (9), pp. 856-864.

Xia, T. X. and Greaves, M., 2002. Upgrading Athabasca tar sand using toe-to-heel air injection. Journal of Canadian Petroleum Technology, 41 (8), pp. 51-57.

Xia, T. X., Greaves, M. and Turta, A. T., 2005. Main mechanism for stability of THAI- toe to heel air injection. Journal of Canadian Petroleum Technology, 44 (1), pp. 42-48.

Xia, T. X., Greaves, M., Turta, A. T. and Ayasse, C., 2003. THAI- a 'short-distance displacement' in situ combustion process for the recovery & upgrading of heavy oils. Chemical Engineering Research & Design, 81 (3), pp. 295-304.

Xiao, L. M., Grogan, M. D. W., Leon-Saval, S. G., Williams, R., England, R., Wadsworth, W. J. and Birks, T. A., 2009. Tapered fibers embedded in silica aerogel. Optics Letters, 34 (18), pp. 2724-2726.

Xue, X., Tang, J., Smirnova, A., England, R. and Sammes, N., 2004. System level lumped-parameter dynamic modeling of PEM fuel cell. Journal of Power Sources, 133 (2), pp. 188-204.

Yahaya, G. O., Brisdon, B. J., Maxwell, M. and England, R., 2001. Preparation and properties of functionalized polyorganosiloxanes. Journal of Applied Polymer Science, 82 (4), pp. 808-817.

Yang, M. and Crittenden, B., 2013. Use of CFD to determine effect of wire matrix inserts on crude oil fouling conditions. Heat Transfer Engineering, 34 (8-9), pp. 769-775.

Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2012. Effect of turbulence enhancement on crude oil fouling in a batch stirred cell. Chemical Engineering Transactions, 29, pp. 1459-1464.

Yang, M. and Crittenden, B. D., 2012. Fouling thresholds in bare tubes and tubes fitted with inserts. Applied Energy, 89 (1), pp. 67-73.

Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2013. Mitigation of crude oil fouling by turbulence enhancement in a batch stirred cell. Applied Thermal Engineering, 54 (2), pp. 516-520.

Yang, M., Young, A., Niyetkaliyev, A. and Crittenden, B., 2012. Modelling fouling induction periods. International Journal of Thermal Sciences, 51, pp. 175-183.

Yarin, A. L., Megaridis, C. M., Mattia, D. and Gogotsi, Y., 2008. Smoothing of nanoscale roughness based on the Kelvin effect. Nanotechnology, 19 (36), 365702.

Ye, S., Yap, Y. H., Kolaczkowski, S. T., Robinson, K. and Lukyanov, D., 2012. Catalyst ‘light-off’ experiments on a diesel oxidation catalyst connected to a diesel engine - methodology and techniques. Chemical Engineering Research & Design, 90 (6), pp. 834-845.

Ying, C.Y.J., Muir, A.C., Valdivia, C.E., Steigerwald, H., Sones Collin L., C., Eason, R.W., Soergel, E. and Mailis, S., 2012. Light-mediated ferroelectric domain engineering and micro-structuring of lithium niobate crystals. Laser and Photonics Reviews, 6 (4), pp. 526-548.

Young, A., Venditti, S., Berrueco, C., Yang, M., Waters, A., Davies, H., Hill, S., Millan, M. and Crittenden, B. D., 2011. Characterization of crude oils and their fouling deposits using a batch stirred cell system. Heat Transfer Engineering, 32 (3-4), pp. 216-227.

Yu, S., Benzeval, I., Bowyer, A. and Hubble, J., 2009. Preparation of pore-filled responsive membranes using dextran precipitation. Journal of Membrane Science, 339 (1-2), pp. 138-142.

Zayed, F., Greiner, L., Schulz, P. S., Lapkin, A. and Leitner, W., 2008. Continuous catalytic Friedel-Crafts acylation in the biphasic medium of an ionic liquid and supercritical carbon dioxide. Chemical Communications, 1, pp. 79-81.

Zhang, F., Hayes, R. E. and Kolaczkowski, S. T., 2004. A new technique to measure the effective diffusivity in a catalytic monolith washcoat. Chemical Engineering Research & Design, 82 (A4), pp. 481-489.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2007. A smart membrane based on an antigen-responsive hyrogel. Biotechnology and Bioengineering, 97 (4), pp. 976-984.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2005. Demonstration of an intelligent hydrogel based diffraction grating. Proceedings of SPIE - The International Society for Optical Engineering, 5758 (Smart Sensor Technol), pp. 254-264.

Zhang, R., Bowyer, A., Eisenthal, R. and Hubble, J., 2008. Temperature responsive pore-filled membranes based on a BSA/poly(N-isopropylacrylamide) hydrogel. Advances in Polymer Technology, 27 (1), pp. 27-34.

Zhang, R., Tang, M., Bowyer, A., Eisenthal, R. and Hubble, J., 2006. Synthesis and characterization of a D-glucose sensitive hydrogel based on CM-dextran and concanavalin A. Reactive & Functional Polymers, 66 (7), pp. 757-767.

Zhang, R. S., Tang, M. G., Bowyer, A., Eisenthal, R. and Hubble, J., 2005. A novel pH- and ionic-strength-sensitive carboxy methyl dextran hydrogel. Biomaterials, 26 (22), pp. 4677-4683.

Zhou, Q., Kennedy, B. J., Ting, V. and Withers, R. L., 2005. Thermal expansion and cation disorder in Bi2InNbO7. Journal of Solid State Chemistry, 178 (5), pp. 1575-1579.

Zou, C. W., Rao, Y. F., Alyamani, A., Chu, W., Chen, M. J., Patterson, D. A., Emanuelsson, E. A. C. and Gao, W., 2010. Heterogeneous lollipop-like V2O5/ZnO array: A promising composite nanostructure for visible light photocatalysis. Langmuir, 26 (14), pp. 11615-11620.

Zou, C. W., Yan, X. D., Patterson, D. A., Emanuelsson, E. A. C., Bian, J. M. and Gao, W., 2010. Temperature sensitive crystallization of V2O5: from amorphous film to β-V2O5nanorods. CrystEngComm, 12 (3), pp. 691-693.

Reports/Papers

Arnot, T., Crittenden, B., Plucinski, P. and England, R., 2008. Submarine integrated waste management system. Other. Unpublished.

Conference or Workshop Items

Ahmet, I., Sharpe, J., Ting, V., Bimbo, N., Burrows, A., Godula-Jopek, A. and Mays, T., 2012. Metal-organic framework materials for hydrogen storage in aerospace applications. In: CPM-6, 2012-04-30 - 2012-05-02, Delray Beach, Florida.

Argyle, I., Pihlajamӓki, A. and Bird, M. R., 2014. Ultrafiltration of black tea using diafiltration to recovery valuable components.

Arnot, T., 2007. Membrane bioreactors: technology, design and application. In: Technologies for Industrial Wastewater Treatment & Reuse in the Mediterranean Region, 2007-05-24 - 2007-05-26, Djerba.

Arnot, T., 2008. Aerobic Membrane Bioreactor Technology. In: ProMembrane International Conference, 2008-05-04 - 2008-05-06, Sfax.

Arnot, T., 2008. Design and Optimisation of Aerobic Membrane Bioreactors. In: ProMembrane International Conference, 2008-05-04 - 2008-05-06, Sfax.

Arnot, T., 2008. Manipulation of Microbial Physiology in Membrane Bioreactors. In: International Symposium on Biotechnology, 2008-05-04 - 2008-05-08, Sfax.

Arnot, T., 2006. Membrane Bioreactors for Waste Water Treatment. In: VIII Spring Postgraduate Membrane School, 2006-04-23 - 2006-04-26, Opole.

Arnot, T., 2001. Operating Membrane Bioreactors under Varying Flux Conditions. In: NAMS 2001, 2001-05-15 - 2001-05-20, Kentucky.

Arnot, T., Skouteris, G., Jraou, M., Feki, F. and Sayadi, S., 2014. Modelling energy consumption in membrane bioreactors for waste water treatment in North Africa. In: WaterBiotech International Conference, 2014-01-08 - 2014-01-10, Marrakech.

Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2006. Assessing the cleaning of unhygienic geometries in the food industry using computational fluid dynamics (CFD). In: Fouling, Cleaning and Disinfection 2006, 2006-03-20 - 2006-03-22, Jesus College, Cambridge.

Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2005. Cleanability prediction for complex geometries in the food industry using CFD. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Asteriadou, K., Hasting, A., Bird, M. and Melrose, J., 2004. The use of Computational Fluid Dynamics for predicting the microbiological safety of foods. In: ICEF9, 2004-03-08 - 2004-03-11, France.

Bamford, R., 2012. Biopolymer supports for catalytic metal nanoparticles. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28, Il Ciocco, Barga.

Bamford, R., 2012. Biopolymer supports for catalytic metal nanoparticles. In: DTC Summer Showcase 2012, 2012-07-09 - 2013-04-13, Bath.

Bannister, C., Hawley, J. G., Ali, H., Chuck, C. and Price, P., 2009. Quantifying the effects of biodiesel blend ratio, at varying ambient temperatures, on vehicle performance and emissions. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 2009-06-15 - 2009-06-17, Florence.

Bavykin, D. V., Kolaczkowski, S. T., Lapkin, A. A. and Plucinski, P. K., 2005. Compact multichannel reactor for liquid phase oxidation of organic feedstocks. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J., Chaudhuri, J. B. and Lewis, R. W. C., 2007. The Structure and Properties of Electroceramics for Bone Graft Substitution. In: The Structure and Properties of Electroceramics for Bone Graft Substitution, UKSB, 2007-01-01, London.

Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J., 2009. A study of the morphology of human bone cells cultured on hydroxyapatite-barium titanate composites. In: Proceedings of the European Society of Biomaterials, 2009-09-01, Lausanne.

Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J. B., 2009. Piezoelectric Hydroxyapatite Composites for Bone Graft Substitution. In: Proceedings of the UK Society for Biomaterials, 2009-07-02 - 2009-07-03, The University of Ulster, Jordanstown, Northern Ireland.

Bennett, C. A. and Crittenden, B. D., 2008. Isokinetic phenomena in crude oil fouling. In: 235th ACS National Meeting, 2008-04-06 - 2008-04-10, New Orleans, LA.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Regenerative Sports Arena, 2012-07-13, Bath.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: Tissue and Cell Engineering Society Annual Conference (TCES), 2013-07-23 - 2013-07-25, Cardiff.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2013. CFD-aided design of a fluidised bed bioreactor for bone tissue engineering. In: 9th Bath Biomechanics Symposium, 2013-09-16, Bath.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Stem cell expansion in a fluidised bed bioreactor for accelerated osseointegration of bone substitute material. In: TERMIS, 2012-09-04 - 2012-09-08, Vienna.

Benzeval, I., Turner, I. and Ellis, M., 2011. Physical and numerical design of a fluidised bed bioreactor for stem cell expansion. In: Inaugural South West Regional Regenerative Medicine Meeting, 2011-09-12 - 2011-09-13, Bristol.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2012. Adhesion strength of the MG63 cell line and its applicability to a fluidised bed bioreactor. In: Tissue and Cell Engineering Society annual conference 2012, 2012-07-04 - 2012-07-06, Liverpool.

Benzeval, I., Turner, I. G. and Ellis, M. J., 2011. Physical and numberical design of a fluidised bed bioreactor for stem cell expansion. In: World Conference on Regenerative Medicine, 2011-11-02 - 2011-11-04, Leipzig.

Bhalla, N., Di Lorenzo, M., Pula, G. and Estrela, P., 2014. Novel tools for protein phosphorylation analysis based on proton release detection. In: 24th Anniversary World Congress on Biosensors, 2014-05-27 - 2014-05-30, Melbourne.

Bimbo, N. M., Hruzewicz-Kolodziejczyk, A., Ting, V. and Mays, T. J., 2011. High-pressure experimental data collection, analysis and modelling of hydrogen storage on nanoporous materials. In: MC10: Tenth International Conference on Materials Chemistry,, 2011-07-04 - 2011-07-07, Manchester.

Bimbo, N. M., Sharpe, J., Noguera Diaz, A. N., Physick, A., Holyfield, L., Rowlandson, J., Xu, W., Ladha, A., Ting, V. and Mays, T. J., 2014. Fuel Gas Storage : The Challenge of Hydrogen. In: ChemEngDayUK 2014, 2014-04-07 - 2014-04-08, Manchester.

Bimbo, N. M., Sharpe, J., Noguera Diaz, A. N., Physick, A., Ting, V. and Mays, T. J., 2013. Enthalpies of adsorption of hydrogen in carbons and metal-organic frameworks: refining the analysis for improving the design of adsorptive storage systems. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2013-12-16 - 2013-12-18, Birmingham.

Bimbo, N., Owens, S., Sharpe, J., Noguera Díaz, A. J., Rushworth, A., Smith, M., Berry, M., Hayes, P. and Mays, T., 2013. Hydrogen Energy Research in the Department of Chemical Engineering, University of Bath, UK. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26, London.

Bird, M., Evans, P. and Wu, D., 2007. The application of UF membranes to the filtration of model tea component solutions and reconstituted black tea powder. In: International Membrane Science and Technology Conference (IMSTEC'07), 2007-11-05 - 2007-11-09, Sydney.

Bradley, S., Di Lorenzo, M. and Kasprzyk-Hordern, B., 2014. Microbial Fuel Cells as On-Line Biosensors for Pharmaceuticals in Wastewater. In: Sensors in the Environment 2014, 2014-11-15 - 2014-11-16, London.

Camus, O., Crittenden, B., Perera, S., Mays, T., Sanchez Liarte, F., Patsos, A., Tennison, S. R. and Crezee, E., 2007. Non-Uniformities in Adsorbent Monoliths. In: 9th International Conference on Fundamentals of Adsorption, 2007-05-20 - 2007-05-25, Giardini Naxos, Sicily.

Camus, O., Perera, S., Crittenden, B., Leal, M., Tennison, S., Kumakiri, I., Miachon, S., Dalmon, J.-A. and Chanaud, P., 2005. Microporous ceramic membranes in industrial ammonia separation. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Cao, E., Greaves, M. and Rigby, S. P., 2009. Paper 2009-048: Phase Properties of Mobile Oil Zone in the THAI™- CAPRI™ Process. In: Canadian International Petroleum Conference, 2009-06-16 - 2009-06-18, Calgary, Alberta.

Christgen, B., Roche, I., Di Lorenzo, M., Scott, K. and Curtis, T. P., 2008. Advances in Microbial Fuel Cells through Cathode, Anode and Membrane Development. In: Fuel Cell Science and Technology, 2008-10-07 - 2008-10-08, Vienna.

Crezee, E., Tennison, S., Camus, O., Crittenden, B., Perera, S., Sanchez Liarte, F., Black, S. and Phillips, P. L., 2007. Electrically regenerable chemical defence system based on carbon monolithic adsorbers. In: 9th Symposium on Protection against Chemical and Biological Warfare Agents, 2007-05-22 - 2007-05-25, Gothenburg.

Crezee, E., Tennison, S. R., Rawlinson, A. P., Place, R. N., Crittenden, B. D. and Perera, S. P., 2005. Electrically regenerable carbon monolithic adsorption system for the recovery and recycle of volatile organic chemicals (VOCs). In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Crittenden, B., Perera, S., Mays, T., Camus, O. and Tennison, S., 2005. Monolithic adsorbents in sustainable development. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Di Lorenzo, M., Curtis, T. P. and Scott, K., 2008. Development of a single chamber microbial fuel cell as BOD sensor. In: Microbial Fuel Cell First International Symposium, 2008-05-19 - 2008-05-27, The Pennsylvania State University, Penn State.

Di Lorenzo, M., Curtis, T. P. and Scott, K., 2008. Development of a single chamber microbial fuel cell as biosensor of the organic content in wastewaters. In: Workshop on Biological Fuel Cells, 2008-07-23 - 2008-07-25, University of Surrey, Guildford.

Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G. and Bornscheuer, U. T., 2006. Stabilization of lipase from Rhizopus oryzae in the presence of commercial triglycerides. In: Third International Congress on Biocatalysis, Biocat 2006, 2006-09-03 - 2006-09-07, Hamburg.

Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G. and Bornscheuer, U. T., 2006. Stabilization of lipase from Rhizopus oryzae in the presence of commercial triglycerides. In: Symposium on Protein Design and Evolution for Byocatalysis, 2006-08-30 - 2006-09-01, Greifswald.

Di Lorenzo, M., Hidalgo, A., Pirozzi, D., Greco, G., Haas, M. J. and Bornscheuer, U. T., 2005. Active expression of lipase forms from Rhizopus delemar in E. coli. In: BioPerspectives 2005, 2005-05-10 - 2005-05-12, Wiesbaden.

Di Lorenzo, M., Pirozzi, D. and Greco, G., 2006. Lipases in the oleochemical industry. In: 17th International Congress of Chemical and Process Engineering, 2006-08-27 - 2006-08-31, Praha.

Di Lorenzo, M., Pirozzi, D., Greco, G. and Hidalgo, A., 2005. Stabilization of a lipase from Rhizopus delemar in the presence of commercial triglycerides. In: BioPerspectives 2005, 2005-05-10 - 2005-05-12, Wiesbaden.

Di Lorenzo, M., Velasquez-Orta, S., Christgen, B., Scott, K. and Curtis, T. P., 2008. Performance of the anode compartment when treating complex wastewaters. In: Microbial Fuel Cell First International Symposium, 2008-05-19 - 2008-05-27, The Pennsylvania State University, Penn State.

Evans, P. and Bird, M., 2006. Solute – membrane interactions during the ultrafiltration of black tea liquor. In: Fouling, Cleaning and Disinfection 2006, 2006-03-20 - 2006-03-22, Jesus College, Cambridge.

Evans, P. and Bird, M., 2007. The fouling and cleaning of ultrafiltration membranes for black tea liquor clarification. In: European Congress of Chemical Engineering (ECCE) – 6, 2007-09-16 - 2007-09-21, Copenhagen.

Firth, B., Kolaczkowski, S. T., Davidson, M. G. and Awdry, S., 2012. Biodiesel Production in Fixed-Bed Catalytic Reactors. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28, Il Ciocco, Barga.

Firth, B. P., Kolaczkowski, S. T., Davidson, M. G. and Awdry, S., 2013. Biodiesel Production in Fixed-Bed Catalytic Reactors. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26, London.

Gopinathan, N., Rigby, S., Greaves, M., Lowe, J., Wood, J. and Dong, L. L., 2011. Determination of the spatial location of coke in catalysts by a novel NMR approach. In: Fantazzini, P., Bortolotti, V., Karger, J. and Galvosas, P., eds. 10th International Bologna Conference on Magnetic Resonance in Porous Media, 2010-09-12 - 2010-09-16, Leipzig.

Greaves, M., Ayasse, C. and Turta, A. T., 2008. Paper 2008-330: In Situ Upgrading Potential of the CAPRI™ Process. In: World Heavy Oil Congress, 2008-03-10 - 2008-03-12, Edmonton, Alberta.

Greaves, M., Bentaher, A. H. and Rathbone, R. R., 2005. Paper D16: Air Injection into Light Oil Reservoirs: Oxidation Kinetics and Simulation. In: 13th European Symposium on Improved Oil Recovery, 2005-04-25 - 2005-04-27, Budapest.

Greaves, M., Dong, L. L. and Rigby, S. P., 2011. Upscaling THAI: Experiment to pilot. In: Canadian Unconventional Resources Conference 2011, CURC 2011, 2011-11-15 - 2011-11-17, Calgary Alberta.

Greaves, M., Dong, L. L. and Rigby, S. P., 2011. Validation of THAI bitumen recovery using 3D combustion cell results. In: 73rd European Association of Geoscientists and Engineers Conference and Exhibition 2011 - Incorporating SPE EUROPEC 2011, May 23, 2011 - May 26, 2011, 2011-05-23 - 2011-05-26, Vienna.

Greaves, M., Dong, L. and Rigby, S. P., 2011. Paper A11: Understanding the Mobile Oil Zone in Toe-to-Heel Air Injection (THAI) Process. In: 16th European Symposium on Improved Oil Recovery, 2011-04-12 - 2011-04-14, Cambridge.

Greaves, M., Dong, L. and Rigby, S. P., 2012. SPE 15817: Determination of Limits to Production in THAI. In: SPE Heavy Oil Conference, Calgary, 2012-06-12 - 2012-06-14, Alberta.

Greaves, M., Hwessa, M. M. and Ayasse, C., 2006. Paper 2006-407: THAI Process Development – Experiment to Pilot. In: World Heavy Oil Conference, 2006-12-05 - 2006-12-06, Beijing.

Greaves, M., Rathbone, R. R., El Ayadi, O. and El Abid, M., 2003. Paper IOR-BO23: Air Injection into Deep Light Oil Reservoirs: Combustion Tube Studies. In: 12th European Symposium on Improved Oil Recovery, 2003-09-08 - 2003-09-10, Kazan, Russia.

Greaves, M., Turta, A. and Xia, T. X., 2009. Paper 2009-346: Shape of the Burned Zone and Volumetric Sweep in THAI™ Process. In: World Heavy Oil Congress, 2009-11-03 - 2009-11-05, Margarita Island, Venezuela.

Greaves, M. and Xia, T. X., 2008. Paper 2008-014: Producing Hydrogen and Incremental Oil from Light Oil Reservoirs Using Downhole Gasification. In: Canadian International Petroleum Conference, 2008-06-17 - 2008-06-19.

Greaves, M. and Xia, T. X., 2003. Paper IOR-B011: Short-Distance Pathway for Success for Heavy Oil Recovery and Upgrading. In: 12th European Symposium on Improved Oil Recovery, 2003-09-08 - 2003-09-10, Kazan, Russia.

Greaves, M. and Xia, T. X., 2005. SPE-97728: Underground Upgrading of Heavy Oil Using THAI – ‘Toe-to-Heel Air Injection’. In: SPE International Thermal Operations and Heavy Oil Symposium, 2005-11-01 - 2005-11-03, Calgary Alberta.

Greaves, M., Xia, T. X., Imbuss, S. and Nero, V., 2004. Paper 2004-067: THAI-CAPRI Process: Tracing Downhole Upgrading of Heavy Oil. In: 5th Canadian International Petroleum Conference, 2004-06-08 - 2004-06-10, Calgary, Alberta.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Paper 038-2005: Underground Gasification for Improved Oil Recovery. In: 6th Canadian International Petroleum Conference, 2005-06-07 - 2005-06-09, Calgary, Alberta.

Greaves, M., Xia, T. X., Rathbone, R. R. and Bentaher, A. H., 2005. Paper IOR-C32: Downhole Gasification for Improved Oil Recovery. In: 13th European Symposium on Improved Oil Recovery, 2005-04-25 - 2005-04-27, Budapest.

Grogan, M.D.W., Leon-Saval, S.G., Williams, R., England, R. and Birks, T.A., 2009. Optical fibre with an aerogel-filled core. In: Conference on Lasers and Electro-Optics, CLEO 2009, 2009-05-31 - 2009-06-05, Baltimore.

Hill, A., 2013. Design of low temperature catalysts for hydrogen release from ammonia. In: DTC Summer Showcase 2013, 2013-09-16 - 2013-09-18, Bath.

Howell, J. A., Chua, H. C., Arnot, T. and Sim, M. C., 2001. Near Critical Flux Operation of Membrane Bioreactors under Dynamic Load. In: United Engineering Foundation Conference on Advanced Membrane Technology, 2001-10-14 - 2001-10-19, Braga.

Johns, M., 2014. Predicting the Solubility of Cellulose in Organic Electrolyte Solutions. In: DTC Summer Showcase 2014, 2014-07-07 - 2014-07-09, Bath.

Kolaczkowski, S. T., Flatley, C., Hawley, G. and Awdry, S., 2001. Catalytic Combustion of Diesel to Power a Gas Turbine on a Hybrid Vehicle - A Cleaner Method of Transport. In: 6th World Congress of Chemical Engineering, 2001-09-23, Melbourne.

Kolaczkowski, S. T., Plucinski, P. and Lapkin, A. A., 2007. Selective oxidation of benzyl alcohol in a pilot scale multichannel reactor. In: 1st International Congress on Green Process Engineering, 2007-04-24 - 2007-04-26, Toulouse.

Kolaczkowski, S., Robinson, K., Awdry, S. and Ye, S., 2008. Transient heat transfer studies on a catalytic convertor under non-reacting conditions. In: 5th International Conference on Environmental Catalysis, 2008-08-31 - 2008-09-03, Queen's University, Belfast.

Lindsey, B. and Mays, T., 2005. Thermogravimetric analysis of the Co-carbonisation of biomass-lignite blends. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Lopez Munoz, M. J., Aguado, J., Cerro, L., Torrente-Murciano, L. and Lapkin, A. A., 2008. Synthesis and characterization of crystalline TiO2 through acid pre-treatment of titanate nanotubes. In: Simposio Iberoamericano de Catálisis (XXI SICAT), 2008-01-01, Málaga-Benalmádena-Costa. Spain.

Lukyanov, D. B., Nguyen, L. H., Vazhnova, T. and Kolaczkowski, S. T., 2005. Combined experimental and kinetic modelling studies of catalyst deactivation: propene and propane aromatisation over H-ZSM-5 catalyst. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Manning, H. and Bird, M. R., 2014. The effect of fouling upon the performance of synthetic membranes used to fractionate gum arabic. In: Fouling and Cleaning in Food Processing 2014: 'Green Cleaning', 2014-03-31 - 2014-04-02, Cambridge.

Manning, H. and Bird, M., 2013. The application of hybrid membrane processes to fractionate gum arabic into streams of added value. In: 17th Gums & Stabilisers for the Food Industry Conference, 2013-06-25 - 2013-06-28, Wrexham.

Mattia, D., Rossi, M. P., Ye, H. and Gogotsi, Y., 2007. In situ Fluid Studies in Carbon Nanotubes with Diameters Ranging from 1 to 500 nm. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics – 2007, 2007-01-01, Athens.

Mcclymont, D., 2011. Copper exchanged zeolites for ammonia reduction of NOx from biogas gas engines. In: DTC Summer Showcase 2011, 2011-07-11 - 2011-07-13, Bath.

Mcclymont, D., 2011. Multi-Step TPSR/QMS Technique to Study the Kinetics of NH3-SCR. In: International Symposium on Nitrogen Oxides' Emission Abatement 2011, 2011-09-04.

Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2012. Novel catalyst systems for deNOx. In: IChemE Catalysis for Energy Meeting, 2012-12-11, University of Birmingham.

Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2013. Novel catalyst systems for deNOx. In: DTC Symposium Series - Sustainable Industrial Catalysis, 2013-01-29, Bath.

Mcclymont, D., Kolaczkowski, S., Molloy, K. C. and Awdry, S., 2013. Silver catalysts for NOx storage and reduction using hydrogen. In: ChemEngDayUK 2013, 2013-03-25 - 2013-03-26, London.

Mcclymont, D., Kolaczkowski, S. T. and Molloy, K. C., 2010. Catalyst system design for the control of NOx using hydrogen. In: DTC Summer Showcase 2010, 2010-07-08 - 2010-07-09, Bath.

Mcclymont, D., Kolaczkowski, S. T., Molloy, K. C. and Awdry, S., 2012. Novel catalyst systems for deNOx. In: DTC Summer Showcase 2012, 2012-07-09 - 2013-04-13, Bath.

Miles, D., Cameron, P. J. and Mattia, D., 2014. Dye-sensitized solar cells using anodized ZnO nanowires. In: MRS Spring Meeting 2014, 2014-04-21 - 2014-04-25, San Francisco.

Minett, D., 2013. Carbon Dioxide conversion to hydrocarbons with reactivated iron-carbon nanotube catalysts.

Minett, D., Mattia, D. and Jones, M., 2011. Conversion of carbon dioxide into useful feedstocks using carbon nanotube supports. In: Great Western CO2 meeting, 2011-06-06 - 2011-06-06, Bath.

Minett, D., Mattia, D. and Jones, M., 2011. Conversion of carbon dioxide into useful feedstocks using carbon nanotube supports - talk. In: Great Western CO2 meeting, 2011-06-06 - 2011-06-06, Bath.

Minett, D., Mattia, D., Jones, M. and Johnson, A., 2010. Synthesis of catalytic species for the conversion of hydrogen to useful feedstocks using carbon nanotubes as a support. In: Chemical Science & Technology towards a Low-Carbon Economy, 2010-10-09, Oxford.

Minett, D., Mattia, D., O'Byrne, J. and Jones, M., 2012. Novel approach for the production of monolith supported carbon nanotubes. In: ChemonTubes 2012, International meeting on the chemistry of nanotubes and graphene, 2012-04-01 - 2012-04-05, Archachon.

Minett, D., O'Byrne, J., Jones, M., Mattia, D. and Plucinski, P., 2013. Carbon dioxide conversion to hydrocarbons using structured carbon nanotube supports. In: SuBiCat 1: Symposium on sustainable catalytic conversions of renewable substrates, 2012-03-24 - 2013-03-26, St Andrews.

Minett, D., O'Byrne, J., Mattia, D. and Jones, M., 2012. Catalysts for carbon dioxide conversion using carbon nanotube supports. In: Gordon Research Conference on Green Chemistry 2012, 2012-07-21 - 2012-07-28, Il Ciocco, Barga.

Narvaez Dinamarca, A., Torrente Murciano, L. and Chadwick, D., 2008. CO2 conversion via one-step synthesis of dimethyl ether (DME). In: 5th International Conference on Environmental Catalysis, 2008-08-31 - 2008-09-03, Queen's University, Belfast.

Nuckols, M. L., Kolaczkowski, S., Awdry, S., Le, C. D., Smith, T. and Thomas, D., 2011. An initial assessment for the use of seawater as a method to remove metabolically-produced carbon dioxide from a submersible atmosphere. In: Oceans '11 MTS/IEEE Kona, 2011-09-19 - 2011-09-22, Hilton Waikoloa Village, Kona, Hawai‘i.

Odunsi, O. Y., He, Y. and Mays, T. J., 2005. Hydrogen storage on nanoporous carbons. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Parker, H., Jones, M. D. and Chuck, C., 2014. Fuel additives from the controlled depolymerization of lignin. In: 248th ACS National Meeting & Exposition, 2014-08-10 - 2014-08-14, San Francisco.

Parker, H., Spellman, J., Chuck, C. and Jones, M. D., 2014. Renewable fuel additives from depolymerized lignin. In: 248th ACS National Meeting & Exposition, 2014-08-10 - 2014-08-14, San Francisco.

Perera, S. P., Crittenden, B. C., Yang, M., Miachon, S. and Dalman, J. A., 2001. Microporous Inorganic Membranes for Fluid Bed Catalytic Cracker (FCC) Off Gas Recovery. In: Engineering With Membranes, 2001-01-01, Granada.

Perera, S. P., Crittenden, B. D. and Mehta, R., 2001. Treatment For Waste Oily Water & Wastewater Conference & Exhibition, Gran Cayman. In: Water Authority -Cayman Cayman Islands, 2001-01-01.

Plucinski, P. and Darragh, B., 2005. Preparation of alumina hollow fibers and their use as phase contactors for the removal of dissolved gases. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Plucinski, P., Arnot, T., Howell, J. A., Weisman, M. and Gilron, J., 2001. Removal of Organic Contaminants from High-Salt Industrial Streams using Micellar Enhanced Membrane Filtration. In: Engineering With Membranes, 2001-01-01, Granada.

Pugsley, A., Bimbo, N. M., Physick, A., Noguera Diaz, A. N., Sharpe, J., Ting, V. and Mays, T. J., 2014. Fuel Gas Storage : The Challenge of Methane. In: ChemEngDayUK 2014, 2014-04-07 - 2014-04-08, Manchester.

Pérez Esteban, P., Enright, M. C., Jenkins, T. and Arnot, T., 2014. Effect of nano-emulsions and bacteriophage/nano-emulsion formulations on S. aureus and P. aeruginosa growth patterns in biofilms. In: Phages 2014, 2014-09-16 - 2014-09-18, Oxford.

Ramirez Canon, A., Mattia, D., Cameron, P. J. and Vezzoli, M., 2014. ZnO Nanostructured photo-catalytic films obtained by anodization and its application in the degradation of organic pollutants. In: 8th European Meeting on Solar Chemistry and Photocatalysis: Environmental Applications, 2014-06-25 - 2014-06-28, Thessaloniki.

Ramirez Canon, A., Miles, D., Cameron, P. J. and Mattia, D., 2013. Zinc oxide nanostructured films produced via anodization: A rational design approach.

Rigby, S. P., 2001. Experimental design for high-throughput experimentation. In: Combinatorial Approaches to Chemistry and Biology III, R.S.C., 2001-01-01, Cambridge.

Rowlandson, J., Parker, S. C., Edler, K. J. and Ting, V., 2014. Analysis of porosity in activated carbons : Reconciling gas sorption with scattering data. In: 10th International Symposium on the Characterization of Porous Solids (COPS-X), 2014-05-11 - 2014-05-14, Granada.

Rowlandson, J., Ting, V. and Parker, S. C., 2014. Structural characterisation and molecular modelling of porous carbons for hydrogen storage. In: DTC symposium series - Hydrogen storage, 2014-01-30 - 2014-01-30, Bath.

Sargeant, L., 2014. The effects of a variety of hydrolysate degradation compounds on the growth and lipid lipid productivity of the oleaginous yeasts, Rhodotorula glutinis and Rhodotorula minuta. In: International Bioenergy Conference, 2014-03-11 - 2014-03-13, Manchester.

Sargeant, L., 2013. Waste to wealth: renewable lipids from Rhodotorula glutinis cultured on waste resources. In: 6th International Conference on Green and Sustainable Chemistry, 2013-08-04 - 2013-08-07, Nottingham.

Shah, A., Fishwick, R., Wood, J., Leek, G., Greaves, M. and Rigby, S. P., 2009. A Review of Novel Techniques for Heavy Oil and Bitumen Extraction and Recovery. In: 8th World Congress of Chemical Engineering, 2009-08-23 - 2009-08-27, Montreal, Quebec.

Shah, A., Fishwick, R. P., Leeke, G. A., Wood, J., Rigby, S. P. and Greaves, M., 2010. Experimental optimization of catalytic process in-situ for heavy oil and bitumen upgrading. In: Canadian Unconventional Resources and International Petroleum Conference 2010, October 19, 2010 - October 21, 2010, 2010-10-19 - 2010-10-21, Calgary Alberta.

Sharpe, J., 2013. Modelling hydrogen storage in nanoporous materials for use in aviation. In: H2FC: Hydrogen & Fuel Cell SUPERGEN Researcher Conference, 2013-12-16 - 2013-12-18, Birmingham.

Sharpe, J., 2013. The modelling of hydrogen storage in nanoporous materials. In: UKERC Summer School, 2013-07-07 - 2013-07-12, Warwick.

Sharpe, J., Bimbo, N., Noguera Díaz, A. J., Ting, V., Rushworth, A. and Mays, T., 2013. A new generalised model for supercritical sorption in nanoporous materials. In: 11th International Conference on Fundamentals of Adsorption, 2013-05-19 - 2013-05-24, Baltimore.

Sharpe, J., Burrows, A., Godula-Jopek, A. and Mays, T., 2012. Hydrogen storage in nanoporous materials for aerospace applications. In: EADS Innovation Works PhD Showcase, 2012-05-27 - 2012-05-28, Bristol.

Sima-Ella, E. and Mays, T., 2005. Oxidation reactivity of coal chars: a simple kinetic analysis. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Tai, C. C., Perera, S. P. and Crittenden, B. D., 2005. Development of adsorbent hollow fibres for environmental applications. In: World Congress of Chemical Engineering, 7th, 2005-07-10 - 2005-07-14, Glasgow.

Torrente Murciano, L. and Chadwick, D., 2009. Direct Synthesis of H2O2 over Au-Pd catalysts for selective oxidation. In: IX Europacat, 2009-09-01, Salamanca.

Torrente Murciano, L. and Chadwick, D., 2009. Direct synthesis of H2O2 for green selective oxidation. In: 6th World Congress on Oxidation Catalysis, 2009-07-01, Lille.

Torrente Murciano, L. and Chadwick, D., 2008. Generation of hydrogen peroxide for green selective oxidation. In: 20th International Symposium on Chemical Reaction Engineering, 2008-09-01, Kyoto.

Torrente Murciano, L. and Chadwick, D., 2008. Selective oxidation with hydrogen peroxide. In: Rideal Conference on Catalysis, 2008-03-01, Cambridge.

Torrente Murciano, L., Chadwick, D., White, V. and Petrocelli, F., 2009. Removal of SOz and NOx from oxyfuel-derived CO2. In: 1st Oxyfuel Conference, 2009-09-01, Cottbus.

Torrente Murciano, L., Chadwick, D., White, V. and Petrocelli, F., 2010. Sour Compression process for the removal of SOx and NOS from oxyfuel derived CO2. In: 10th International Conference on Greenhouse Gas Control Technologies, 2010-09-01, Amsterdam, Holland.

Torrente Murciano, L., García- García, F., Li, K. and Chadwick, D., 2011. Hollow fibre membrane reactors for high yields: catalysis and process integration. In: 10th International Conference on Catalysis in Membrane Reactors (ICCMR10), 2011-06-20 - 2011-06-24, St Petersburg, Russia.

Torrente-Murciano, L., White, V. and Chadwick, D., 2009. Removal of SOx and NOx from oxyfuel-derived CO2. In: 1st Oxyfuel Combustion Conference, 2009-09-08 - 2009-09-11, Cottbus.

Turner, I. G., Bowen, C. R., Baxter, F. R., Gittings, J. and Chaudhuri, J. B., 2011. The effect of poling on the in vitro response to poled HA and HABT composites for clinical applications. In: 24th European Conference on Biomaterials, EBS 2011, 2011-09-04 - 2011-09-08, Dublin.

Turta, A. T., Coates, R. and Greaves, M., 2009. Paper 2009-150: In-Situ Combustion in Oil Reservoirs Underlain by Bottom Water. Review of the Field and Laboratory Tests. In: Canadian International Petroleum Conference, 2009-06-16 - 2009-06-18, Calgary, Alberta.

Xia, T. X., Greaves, M. and Turta, A., 2003. Paper 2003-030: Main Mechanism for Stability of THAI – “Toe-to-Heel Air Injection”. In: Canadian International Petroleum Conference, 2003-06-10 - 2003-06-12, Calgary Alberta.

Xia, T. X., Greaves, M., Werfilli, W. S. and Rathbone, R. R., 2002. Paper 2002-027: THAI Process – Effect of Oil Layer Thickness on Heavy Oil Recovery. In: Canadian International Petroleum Conference, 2002-06-11 - 2002-06-13, Calgary, Alberta.

Xia, T. X., Greaves, M., Werfilli, W. S. and Rathbone, R. R., 2002. SPE 78998: Downhole Conversion of Lloydminster Heavy Oil Using THAI-CAPRI Process. In: SPE International Thermal Operations and Heavy Oil Symposium, and International Horizontal Wells Conference, 2002-11-04 - 2002-11-07, Calgary Alberta.

Xia, T., Greaves, M. and Turta, A., 2002. Injection well - Producer well combinations in THAI 'Toe-to-heel air injection'. In: SPE/DOE Thirteenth Symposium on Improved Oil Recovery, 2002-04-13 - 2002-04-17, Tulsa, OK.

Xiao, L., Grogan, M.D.W., Leon-Saval, S.G., Williams, R. J., England, R., Wadsworth, W.J. and Birks, T.A., 2009. Tapered fibres embedded in silica aerogel. In: Conference on Lasers and Electro-Optics, CLEO 2009, 2009-05-31 - 2009-06-05, Baltimore.

Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2012. Effect of turbulence enhancement on crude oil fouling in a batch stirred cell. In: 20th International Congress of Chemical and Process Engineering, CHISA 2012, 2012-08-24 - 2013-08-28, Prague.

Thesis

Al Badran, F., 2011. Reactor design: compact and catalytic for speciality chemicals. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Asli, U. A., 2011. Catalytic Monoliths for Biodiesel Production. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Benzeval, I., 2009. Development of responsive polymers for drug delivery applications. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Bimbo, N. M. M. d. S., 2013. Modelling and Analysis of Hydrogen Storage in Nanostructured Solids for Sustainable Energy Systems. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Bishopp, S., 2014. A solvent-free alternative for green liquid-liquid biphasic oxidations. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Chua, L. M., 2010. Deactivation of PtH-ZSM-5 Bifunctional Catalysts by Coke Formation during Benzene Alkylation with Ethane. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Chuck, C. J., 2007. Lewis acid catalyst design for the transesterification of lower quality feedstock for biodiesel production. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Davidson, A. J., 2011. Bioartificial livers: theoretical methods to improve and optimize design. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Evans, P. J., 2008. Membrane – Solute – Cleaning agent interaction during the ultrafiltration of black tea liquor. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Evbuomwan, I., 2009. The structural characterisation of porous media for use as model reservoir rocks, adsorbents and catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Fan, X., 2010. Selective Catalytic Hydrogenation in a Structured Compact Multifunctional Reactor. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Firth, B., 2014. Biodiesel Production in Fixed-Bed Monolithic Reactors. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Fitzgerald, L. E., 2012. The application of microfiltration as a partial sterilisation technique for the reduction of psychrotrophic spore forming bacteria from viscous dairy feeds. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Gopinathan, N., 2012. Development of Catalyst Characterisation Techniques. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Hancock, S. L., 2013. Preparation of Initiators for Sustainable Polymerisation. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Hruzewicz-Kolodziejczyk, A., 2013. Towards a Standard Methodology for Determining Hydrogen Storage in Nanoporous Materials. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Jones, S., 2012. The Application of Enhanced Fluid Dynamic Gauging as a Fouling Sensor for Pressure Driven Membrane Separations in the Food Industry. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Le, C. D., 2012. Gasification of Biomass : An Investigation of Key Challenges to Advance Acceptance of the Technology. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Lee, K. P., 2013. Fabrication and Applications of Nanoporous Alumina Membranes. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Marino, H., 2010. Phase inversion temperature emulsification: from batch to continuous process. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Perkins, E., 2009. Nuclear Magnetic Resonance studies of controlled drug release devices. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Sanchez Liarte, F., 2009. Performance of electrically regenerable monolithic adsorbents for VOC control. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Shiko, E., 2013. NMR and Gas Sorption Studies of Structure-Transport Relationships in Porous Media. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Sim Lee, Y., 2009. The development of controlled-chemotherapy drug delivery system. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Skouteris, G. S., 2010. Low Energy Membrane Bioreactors for Decentralised Waste Water Treatment. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Smugowski, H. J., 2011. Magnetic nanoparticulate catalysts in flow processes. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Tanko, N. L., 2011. Transport Relationships in Porous Media as a Model for Oil Reservoir Rocks. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Wong, K., 2009. Benzene alkylation with ethane into ethylbenzene over Pt-containing zeolite bifunctional catalysts. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Patent

Chadwick, D., Torrente Murciano, L. and , D. G. T. I., 2011. Selective catalytic oxidation of C1-C3 alkenes. WO 2011051643 (A1), May 2011.

Chaudhuri, J., Jarman-Smith, M. and Stewart, K., 2009. Bioreactors for Tissue Engineering. C12M1/40-WO2009037462 (A1), 26 March 2009.

Hubble, J., Chaudhuri, J., Eisenthal, R., Zhang, R., Bowyer, A., Jarman-Smith, M. L. and Tang, M., 2005. Process. A61K8/04-WO2005116084 (A1), 08 December 2005.

Kolaczkowski, S., 2010. Apparatus and Process For Use In Three-Phase Catalytic Reactions. C07C45/29-US2010010269 (A1), 14 January 2010.

Moghe, P. V., Sharma, R. and Pereira, M., 2008. Methods, Systems, and Compositions for Extracellular Matrix Production. A61K 8/18, A61Q 13/00, C12P 21/06, 2008.

Perera, S., 2007. Biocompatible Drug Delivery Device. A61K9/70-WO2007052042 (A2), 10 May 2007.

Perera, S. and Tai, C.-C., 2011. Hollow fibres. D01D5/247 -AT513071 (T), 15 July 2011.

Pourbafrani, M., Forgacs, G., Sárvári Horváth, I. and Taherzadeh, M. J., 2011. Framställning av mångahanda biprodukter från fasta citrusrester. SE0901415-0, 2011.

Other

Kolaczkowski, S. and Williams, J., 2012. Continuous Flow Solutions for Pharmaceutical Manufacture. University of Bath.

Mays, T., 2012. UK Hydrogen Energy Programme. University of Bath.

Perera, S. P. and Crittenden, B. D., 2012. Regenerative Oil Vapour Removal System using low energy monolithic structures.

Scott, R., Arnot, T. and Davidson, M., 2012. Using Algae in the Wastewater Treatment Process: Sustainable Technology at the University of Bath. University of Bath.

This list was generated on Sat Nov 22 19:14:24 2014 GMT.