Research

Items from Faculty of Engineering & Design > Architecture & Civil Engineering

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level: 2629.

Scheublin, F., Pronk, A., Prins, M., Emmitt, S. and Otter, A., eds., 2006. Adaptables 2006. Proceedings of International Conference on Adaptability in Design and Construction.Vol. 3. Eindhoven University Press.

Emmitt, S., Prins, M. and den Otter, A., eds., 2009. Architectural Management:International Research and Practice. Wiley-Blackwell.

, 2011. Conservation of the historic interior. In: Forsyth, M., Forsyth, M. and White, L., eds. Interior Finishes & Fittings for Historic Building Conservation. Oxford, UK: Wiley-Blackwell, pp. 1-10.

Emmitt, S. and Prins, M., eds., 2005. Designing Value:New directions in Architectural Management. Technical University of Denmark.

Emmitt, S., ed., 2012. Lean Design Management. Routledge.

Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds., 2014. Shell Structures for Architecture:Form Finding and Optimization. Routledge.

, 2011. Special Issue:Integrated project delivery. Lean Construction Journal

Charrington, H., ed., 1998. Alvar Aalto: Kulttuuritalo. The House of Culture. Rakennustieto Oy.

Charrington, H. and Nava, V., eds., 2011. Alvar Aalto:The Mark of the Hand. Rakennustieto Publishing.

Anstey, T., Grillner, K. and Hughes, R., eds., 2007. Architecture and Authorship. Black Dog Publishing.

Jackson, P. and Nevola, F., eds., 2006. Beyond the Palio: Urban Ritual in Renaissance Siena. Blackwell Publishing.

Dhir, R. K., Paine, K. A. and Newlands, M. D., eds., 2002. Composite materials in concrete construction. Thomas Telford.

Nikolopoulou, M., ed., 2004. Designing Open Spaces in the Urban Environment: a Bioclimatic Approach. Centre for Renewable Energy Sources, EESD, FP5.

Ledbetter, S., Keiller, A. and Liao, Z., eds., 2007. ICBEST '07 - Proceedings. Centre for Window and Cladding Technology.

Forsyth, M., ed., 2008. Materials and Skills for Historic Building Conservation. Blackwell Publishing. (Historic Building Conservation; 1)

Hart, V. and Hicks, P., eds., 1998. Paper Palaces: Rise of the Renaissance Architectural Treatise. Yale University Press.

Odgers, J., Samuel, F. and Sharr, A., eds., 2006. Primitive: Original Matters in Architecture. Routledge.

Porter, R. and Zang, J., eds., 2015. Proceeding of the 30th International Workshop on Water Waves and Floating Bodies, 12-15 April 2015, Bristol, UK. International Workshop on Water Waves and Floating Bodies.

Dhir, R. K. and Paine, K. A., eds., 1999. Radical design and concrete practices. Thomas Telford.

Dhir, R. K., Limbachiya, M. C. and Paine, K. A., eds., 2001. Recycling and reuse of used tyres. Thomas Telford.

Dhir, R. K., Paine, K. A. and Tang, M. C., eds., 2005. Role of concrete in nuclear facilities. Thomas Telford.

Dhir, R. K., Newlands, M. D. and Paine, K. A., eds., 2003. Role of concrete in sustainable development. Thomas Telford.

Charrington, H., ed., 1989. Scroope Journal, Issue 1. University of Cambridge.

Dhir, R. K., Dyer, T. D. and Paine, K. A., eds., 2000. Sustainable construction: Use of incinerator ash. Thomas Telford.

Marder, T. A. and Wilson Jones, M., eds., 2015. The Pantheon:From Antiquity to the Present. Cambridge University Press.

Schofield, R. and Tavernor, R., eds., 2009. Vitruvius, On Architecture. Penguin. (Penguin Classics)

, I. o. S. E., 2007. Manual for the design of timber building structures to Eurocode 5. The Institution of Structural Engineers.

Ab Rahman, R. and Day, A., 2006. A comparative study of digital and traditional tools for participative design. In: Computing in Architecture: Re-Thinking the Discourse - The Second International Conference for Computer Aided Architectural Design (ASCAAD 2006), 2006-04-25 - 2006-04-27.

Abora, K., Paine, K., Quillin, K. and Dunster, A., 2012. Properties and performance of alkali activated fly ash and hydrated lime concrete. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11.

Abora, K., Quillin, K., Paine, K. A. and Dunster, A. M., 2009. Effect of mix design on consistence and setting time of alkali activated concrete. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Abson, N. I., Allen, G., Ball, R. J. and El-Turki, A., 2009. Linseed fibre lime composites, effect of fibre pre-treatment. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Abu Saleh, M., 2014. Development of Sustainable and Low Carbon Concretes for the Gulf Environment. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Acikgoz, M. S., Pelecanos, L., Giardina, G., Aitken, J. and Soga, K., 2016. Distributed sensing of a masonry vault due to nearby piling. Structural Control and Health Monitoring

Adamu, Z., Emmitt, S. and Soetanto, R., 2015. Social BIM:Co-creation with shared situational awareness. ITcon - Technology Strategies for Collaborative Working, 20, pp. 230-252.

Adelman-Larsen, N. W. and Dammerud, J. J., 2011. A Survey of Reverberation times in 50 European venues presenting pop & rock concerts. In: Forum Acusticum 2011, 2011-06-27 - 2011-07-01.

Adelman-Larsen, N. W., Thompson, E. R. and Dammerud, J. J., 2014. On a variable broadband absorption product and acceptable tolerances of reverberation times in halls for amplified music. In: Acoustical Society of America 162nd Meeting, 2011-10-31 - 2011-11-04.

Adeyeye, K., 2009. Teaching Construction Contracts: Mutual Learning Experience:Journal of Legal Affairs and Dispute Resolution in Engineering and Construction. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 1 (2), pp. 97-104.

Adeyeye, K., Pasquire, C., Soar, R., Austin, S. and Pendlebury, M., 2006. Architectural freeform construction:Potential use in repair for re-use, maintenance and manufacture of building components. In: Annual Research Conference of the Royal Institution of Chartered Surveyors, COBRA 2006, 2006-09-07 - 2006-09-08.

Adeyeye, K., Bouchlaghem, D. and Pasquire, C., 2010. A conceptual framework for hybrid building projects. Facilities, 28 (7/8), pp. 358-370.

Adeyeye, K., Bouchlaghem, D. and Pasquire, C., 2009. An information-led process framework for hybrid projects. In: 25th Annual Conference of the Association of Researchers in Construction Management, ARCOM 2009, 2009-09-07 - 2009-09-09.

Adeyeye, K., Codinhoto, R. and Emmitt, S., 2016. Integrated Design for Flood Resilience. In: Emmitt, S. and Adeyeye, K., eds. International Conference on Integrated Design, 2016-06-29 - 2016-07-01, University of Bath. Bath: University of Bath, p. 251.

Adeyeye, K., Osmani, M. and Brown, C., 2007. Energy conservation and building design:the environmental legislation push and pull factors. Structural Survey, 25 (5), pp. 375-390.

Adeyeye, K., Pasquire, C., Bouchlaghem, D. and Chandler, J., 2006. Exploring the efficacy of digital tools for the design and construction of hybrid buildings. In: 22nd Annual Conference on Association of Researchers in Construction Management, ARCOM 2006, 2006-09-04 - 2006-09-06.

Adeyeye, K., Piroozfar, P., Painting, N. and Ahmed, A., 2011. Intensive teaching blocks in design disciplines:A practical application. CEBE Transactions, 8 (1), pp. 74-98.

Adeyeye, K., Piroozfar, P., Rosenkind, M., Winstanley, G. and Pegg, I., 2013. The impact of design decisions on post occupancy processes in school buildings. Facilities, 31 (5), pp. 255-278.

Adeyeye, K. and She, K., 2015. Preliminary Studies in Demystifying the Showering Experience. In: Water Efficiency Conference, 2015-08-05 - 2015-08-07, University of Exeter.

Adriaenssens, S., Barnes, M. and Williams, C., 1999. A new analytic and numerical basis for the form-finding and analysis of spline and gridshell structures. In: Kumar, B. and Topping, B. H. V., eds. Computing Developments in Civil and Structural Engineering. Edinburgh: Civil-Comp Press, pp. 83-91.

Adriaenssens, S. M. and Barnes, M. R., 2001. Tensegrity Spline Beam and Grid Shell Structures. Engineering Structures, 23 (1), pp. 29-36.

Adriaenssens, S. and Barnes, M., 2015. Torsion/bending elements for DR modelling of tubular bearing structues structural membranes 2015. International Center for Numerical Methods in Engineering, pp. 46-64.

Adriaenssens, S., Barnes, M., Harris, R. and Williams, C., 2014. Dynamic relaxation:design of a strained timber gridshell. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 89-102.

Adriaenssens, S., Malek, S., Miki, M. and Williams, C. J. K., 2013. Generating smooth curves in 3 dimensions by minimizing higher order strain energy measures. International Journal of Space Structures, 28 (3-4), pp. 119-126.

Adriaenssens, S., Ney, L., Bodarwe, E. and Williams, C. J. K., 2012. Finding the form of an irregular meshed steel and glass shell based on construction constraints. Journal of Architectural Engineering, 18 (3), 206–213.

Adriaenssens, S., Ney, L., Bodarwe, E. and Williams, C. J. K., 2009. Dutch Maritime Museum: Form-finding of an irregular faceted skeletal shell – Part a. In: International Association for Shell and Spatial Structures (IASS) Symposium 2009: Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, 2009-09-28 - 2009-10-02.

Adriaenssens, S., Ney, L., Bodarwe, E. and Williams, C. J. K., 2009. Dutch Maritime Museum: Form-finding of an irregular faceted skeletal shell – Part b. In: International Association for Shell and Spatial Structures (IASS) Symposium 2009: Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, 2009-09-28 - 2009-10-02.

Aish, R., Fisher, A., Joyce, S. and Marsh, A., 2012. Progress towards multi-criteria design optimisation using DesignScript with SMART form, robot structural analysis and Ecotect building performance analysis. In: Association for Computer-Aided Design in Architecture, 2012-10-18 - 2012-10-21, California College of the Arts. San Francisco: ACADIA, pp. 47-56.

Alharbi, M., Emmitt, S. and Demian, P., 2015. Transferring architectural management into practice:a taxonomy framework. Frontiers of Architectural Research, 4 (3), pp. 237-247.

Alharbi, M., Emmitt, S. and Demian, P., 2015. What is architectural management?:towards a pragmatic definition. Engineering, Construction and Architectural Management, 22 (2), pp. 151-168.

Ali, F. A., Shepherd, P., Randall, M., Simms, I. W., O'Connor, D. J. and Burgess, I., 1998. The effect of axial restraint on the fire resistance of steel columns. Journal of Constructional Steel Research, 46 (1-3), 177.

Aljawabra, F. and Nikolopoulou, M., 2009. Outdoor thermal comfort in the hot arid climate: The effect of socio-economic background and cultural differences. In: 26th International Conference on Passive and Low Energy Architecture, 2009-06-22 - 2009-06-24.

Aljawabra, F., 2014. Thermal comfort in outdoor urban spaces: The hot arid climate. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Allen, G. C. and Ball, R., 2012. Mechanical properties of hydraulic lime mortars. In: Portuguese Association of Construction Mortar (APFAC), 4th Portuguese Conference on Mortars and External Thermal Insulation Composite Systems (ETICS), 2012-03-29 - 2012-03-30.

Allen, G. C. and Ball, R. J., 2010. Mechanical properties of hydraulic lime mortars. In: APFAC, 3rd Congresso Portugues de Argamassas de Construção, 2010-03-18 - 2010-03-19.

Allen, G. C., Heard, P. J., El-Turki, A., Ball, R. J., Soro, J., Gault, C. and Smith, A., 2005. Environmental scanning electron and focused ion beam microscopy of novel fillers and binders in cement-based composites. In: 10th Euroseminar on Microscopy Applied to Building Materials, 2005-06-21 - 2005-06-25.

Almar, R., Catalan, P., Ibaceta, R., Blenkinsopp, C., Cienfuegos, R., Villagran, M. and Aguilera, J.C., 2014. Comparison of swash zone measurements during energetic wave conditions at a dissipative beach.

Almar, R., Catalan, P., Ibaceta, R., Blenkinsopp, C., Cienfuegos, R., Villagran, M. and Aguilera, J.C., 2014. Swash zone based reflection during energetic wave conditions at a dissipative beach: Toward a wave-by-wave approach.

Almeida, L. P., Masselink, G., Russell, P.E., Davidson, M., Poate, T., Mccall, R., Blenkinsopp, C. and Turner, I.L., 2013. Observations of the swash zone on a gravel beach during a storm using a laser-scanner (Lidar). Journal of Coastal Research, SI 65, pp. 636-641.

Almond, D. P., Budd, C. J., Freitag, M. A., Hunt, G. W., McCullen, N. J. and Smith, N. D., 2013. The origin of power-law emergent scaling in large binary networks. Physica A: Statistical Mechanics and its Applications, 392 (4), pp. 1004-1027. Item availability may be restricted.

Almond, D. P., Ball, R. J., Dillenz, A., Busse, G., Krapez, J. C., Galmiche, F. and Maldague, X., 2000. Round Robin comparison II of the capabilities of various thermographic techniques in the detection of defects in carbon fibre composites. In: Quantitative Infrared Thermography (QIRT2000) Eurotherm Seminar 64, 2000-07-01.

Almond, D. P., Ball, R. J. and Hooker, J. D., 1998. The detection and measurement of impact in thick carbon fibre reinforced laminates by transient thermography. In: Quantitative Infrared Thermography (QIRT'98) Eurotherm Seminar 60, 1998-09-07 - 1998-09-10.

Amato, A., Musso, S., Pesce, G., Salvitti, E. and Vecchiattini, R., 2004. S. Sisto in Genova:la chiesa dei Re. Dall'analisi archeologica allo studio del comparto urbano. Archeologia dell’Architettura, 9, pp. 167-191.

Amirjamshidi, G., Fodde, E. and D'Ayala, D., 2012. An investigation into the materials used for the conservation of Bam. In: Terra 2012, 11th international conference on the study and conservation of earthen structures, 2012-04-22 - 2012-04-26.

Amirjamshidi, G., Fodde, E., D'Ayala, D. and Mokhtari, E., 2012. The role of intangible assets in the conservation of Bam and its cultural landscape as a World Heritage site. In: 5th International Conference on Sustainable Tourism, ST 2012;A. Coruna;, 2012-06-12 - 2012-06-14.

Amirjamshidi, G., Fodde, E., Forsyth, M., Heath, A. and Mokhtari, E., 2012. Towards a methodology for the study of holistic approaches for the conservation of earthen architecture in seismic areas. In: Proceedings of LEHM 2012: 6th International Conference on Building with Earth, 2012-10-05 - 2012-10-07.

Ansal, A., D'Ayala, D., Kurtulus, A. and Tönük, G., 2010. Site specific ground motion estimations for the vulnerability assessment of historic buildings in Istanbul. In: 7th International Conference on Urban Earthquake Engineering, 2010-03-03 - 2010-03-05.

Ansell, M. P., 2015. Wood microstructure:a cellular composite. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 3-26. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M. P., 1982. Acoustic-Emission from Softwoods in Tension. Wood Science and Technology, 16 (1), pp. 35-57.

Ansell, M. P., 1983. Stake and Socket Fractures in Polyester Fibers. Journal of Materials Science Letters, 2 (2), pp. 47-49.

Ansell, M. P., Hill, C. A. S. and Allgood, C., 1983. Architectural PTFE-Coated Glass Fabrics - Their Structure and Limitations. Textile Research Journal, 53 (11), pp. 692-700.

Ansell, M. P., 2015. Carbonised and mineralised wood composites. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 395-409. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M. P., 2015. Hybrid wood composites-integration of wood with other engineering materials. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 411-426. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M. P., 2015. Preface. In: Ansell, M. P., ed. Wood Composites. Cambridge, U. K.: Woodhead Publishing Ltd., xvii-xviii. (Woodhead Publishing Series in Composites Science and Engineering; 54)

Ansell, M. P., 2015. Wood composites. Woodhead Publishing Ltd.. (Woodhead Publihsing Series in Composites Science and Engineering; 54)

Anstey, T., 2005. The ambiguities of disegno. The Journal of Architecture, 10 (3), pp. 295-306.

Anstey, T., 2006. The dangers of decorum. arq: Architectural Research Quarterly, 10 (1), pp. 131-139.

Anstey, T., 2003. Theology and Geometry in the façade of S. Maria Novella. Albertiana, Journal of the Societée International Leon Battista Alberti, 06.

Archila, H. A., Takeuchi, C. and Trujillo, D., 2015. Mechanical and physical characterization of composite bamboo-guadua products:Plastiguadua. In: 68th FPS-IC and WCTE 2014, 2016-02-20, Canada.

Archila Santos, H., Pesce, G., Ansell, M. and Ball, R., 2015. Limeboo: Lime as a Replacement for Cement in Wall-Framing Systems with Bamboo-Guadua (Bahareque Encementado). In: 16th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 2015-08-10 - 2015-08-13.

Archila Santos, H. F., 2015. Thermo-hydro-mechanically modified cross-laminated Guadua-bamboo panels. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Ascione, F., Mancusi, G., Spadea, S., Lamberti, M., Lebon, F. and Maurel-Pantel, A., 2015. On the flexural behaviour of GFRP beams obtained by bonding simple panels:an experimental investigation. Composite Structures, 131, pp. 55-65.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Buckling of FRP thin-walled beams with open cross-section. In: 42nd Italian Association for Stress Analysis (AIAS) National Conference, 2013, 2013-09-11 - 2013-09-14.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2012. Local buckling analysis of pultruded FRP profiles:a mechanical model. In: ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Stability curves of FRP thin-walled profiles. In: 21st AIMETA national Conference, 2013, 2013-09-21 - 2013-09-24.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Stability of FRP thin-walled beams. In: Problemi attuali e prospettive nell'ingegneria delle strutture, 2013, 2013-09-26 - 2013-09-27.

Ascione, L., Berardi, V. P. and Spadea, S., 2012. Buckling behaviour of FRP pultruded beams. In: 1st International Conference on Civil Engineering Infrastructure Based on Polymer Composites, CECOM, 2012, 2012-11-22 - 2012-11-23.

Ascione, L., Giordano, A. and Spadea, S., 2011. Lateral buckling of pultruded FRP beams. Composites Part B - Engineering, 42 (4), pp. 819-824.

Ascione, L., Giordano, A. and Spadea, S., 2010. Stabilita flesso-torsionale di travi pultruse di FRP. In: 39th AIAS National Conference, 2010, 2010-09-07 - 2010-09-10.

Ascione, L., Mancusi, G. and Spadea, S., 2008. Comportamento in condizioni di esercizio di travi di conglomerato cementizio armate con barre di FRP. In: 37th AIAS National Conference, 2008, 2008-09-10 - 2008-09-13.

Ascione, L., Mancusi, G. and Spadea, S., 2010. Flexural behaviour of concrete beams reinforced with GFRP bars. Strain, 46 (5), pp. 460-469.

Ascione, L., Mancusi, G. and Spadea, S., 2009. Serviceability behaviour of concrete beams reinforced with FRP bars. In: Proceedings of Composites, 2009, 2009-04-01 - 2009-04-03.

Ascione, L., Mancusi, G. and Spadea, S., 2010. Travi di conglomerato cementizio armate con barre di FRP. L'Edilizia, 163, pp. 64-71.

Ascione, L., Razaqpur, A.G. and Spadea, S., 2014. Effectiveness of FRP stirrups in concrete beams subject to shear. In: The 7th International Conference on FRP Composites in Civil Engineering – CICE 2014, 2014-08-20 - 2014-08-22.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Buckling failure modes of FRP thin-walled beams. Composites Part B - Engineering, 47, pp. 357-364.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Local buckling behavior of FRP thin-walled beams:a mechanical model. Composite Structures, 98, pp. 111-120.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2014. Macro-scale analysis of local and global buckling behavior of T and C composite sections. Mechanics Research Communications, 58, pp. 105-111.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2015. Pre-buckling imperfection sensitivity of pultruded FRP profiles. Composites Part B - Engineering, 72, pp. 206-212.

Ashley, K., Osmani, M., Emmitt, S. and Mallinson, M., 2011. The conservation of tradition and vernacular construction in developing regions:the current context. In: Proceedings of Detail Design in Architecture 10. , pp. 181-190.

Ashley, K. S., Osmani, M., Emmitt, S., Mallinson, M. and Mallinson, H., 2015. Assessing stakeholders’ perspectives towards the conservation of the built heritage of Suakin, Sudan. International Journal of Heritage Studies, 21 (7), pp. 674-697.

Ashley, K. S., Osmani, M., Emmitt, S., Mallinson, M. and Mallinson, H., 2014. Impacts of cultural dynamics on conservation of Suakin, Sudan. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 167 (6), pp. 264-278.

Ashmore, J. and Richens, P. N., 2001. Computer Simulation in Daylight Design: a comparison. Architectural Science Review, 44 (1), pp. 33-44.

Ashmore, J. P. and Richens, P., 2001. Pano painter - sketching in the round. In: Bury, M., Datta, S., Dawson, A. and Rollo, J., eds. Proceedings of Mathematics and Design 2001. Geelong, Australia: Deakin University, pp. 332-347.

Austin, M.J., Masselink, G., Russell, P.E., Turner, I.L. and Blenkinsopp, C.E., 2011. Alongshore fluid motions in the swash zone of a sandy and gravel beach. Coastal Engineering, 58 (8), pp. 690-705.

Ayala-Cabrera, D., Herrera Fernandez, A. M., Izquierdo, J., Perez-Garcia, R. and Piller, O., 2016. A New GPR Image Analysis Proposal Based on a Multi-agent Approach and Properties of Groups. Towards Automatic Interpretations. In: International Congress on Environmental Modelling and Software, 2016-07-10 - 2016-07-14, École nationale supérieure d'électronique, d'électrotechnique, d'informatique, d'hydraulique et des télécommunications.

Ayyaz, M. S., Ruikar, K. D. and Emmitt, S., 2012. Towards understanding BPR needs for BIM implementation. International Journal of 3-D Information Modeling (IJ3DIM), 1 (4), pp. 18-28.

Bak, A., Shepherd, P. and Richens, P., 2012. Intuitive interactive form finding of optimised fabric-cast concrete. In: Second International Conference on Flexible Formwork (icff2012), 2012-06-27 - 2012-06-29, University of Bath.

Bak, A., Shepherd, P. and Richens, P., 2012. Intuitive interactive form finding of optimised fabric-cast concrete. In: Second International Conference on Flexible Formwork (icff2012), 2012-06-27 - 2012-06-29.

Bakala, C. and Harris, R., 2008. The Cork Airport Roof. In: 10th World Conference of Timber Engineering, 2008-06-02 - 2008-06-05.

Baker, J., Bouchlaghem, D. and Emmitt, S., 2013. Categorisation of fire safety management:results of a Delphi Panel. Fire Safety Journal, 59, pp. 37-46.

Bale, C., McCullen, N., Foxon, T., Rucklidge, A. and Gale, W., 2011. Local authority interventions in the domestic sector and the role of social networks:a case study from the city of Leeds. In: Energy and People: Futures, complexity and challenges, 2012-09-20 - 2012-09-21.

Bale, C. S. E., McCullen, N. J., Foxon, T. J., Rucklidge, A. M. and Gale, W. F., 2013. Harnessing social networks for promoting adoption of energy technologies in the domestic sector. Energy Policy, 63, pp. 833-844.

Ball, R. J. and Allen, G. C., 2013. Hydraulic lime mortars: A study of mechanical properties. In: Barnett, S., ed. Cement and Concrete Science Conference 2013, 2013-09-02 - 2013-09-03. Portsmouth: University of Portsmouth.

Ball, R. J., Allen, G. C., Starrs, G. and McCarter, W. J., 2011. Impedance spectroscopy measurements to study physio-chemical processes in lime-based composites. Applied Physics A Materials Science & Processing, 105 (3), pp. 739-751.

Ball, R. J., 2000. Failure Mechanisms in Valve Regulated Lead Acid Batteries. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Ball, R. J. and Allen, G. C., 2010. The measurement of water transport in porous materials using impedance spectroscopy. Journal of Physics D: Applied Physics, 43 (10), 105503.

Ball, R. J., Allen, G. C., Carter, M. A., Wilson, M. A., Ince, C. and El-Turki, A., 2012. The application of electrical resistance measurements to water transport in lime–masonry systems. Applied Physics A Materials Science & Processing, 106, pp. 669-677.

Ball, R. J. and Allen, G. C., 2010. Load-dependent deformation and shrinkage in hydraulic lime mortars. International Journal of Sustainable Engineering, 3 (1), pp. 40-46.

Ball, R. J., El-Turki, A. and Allen, G., 2009. Influence of carbonation on the load dependent deformation of hydraulic lime mortars. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Ball, R. J., El-Turki, A., Allen, W. J. and Allen, G. C., 2007. The stress cycling of hydraulic lime mortars. Proceedings of Institution of Civil Engineers, Construction Materials, 160 (2), pp. 57-63.

Ball, R. J., El-Turki, A., Allen, W. J., Nicholson, J. A. and Allen, G. C., 2009. Deformation of NHL3.5 and CL90/PC hybrid mortars. Proceedings of the Institution of Civil Engineers: Construction Materials, 162 (1), pp. 29-35.

Ball, R. J., El-Turki, A. and Allen, G. C., 2011. Influence of carbonation on the load dependent deformation of hydraulic lime mortars. Materials Science and Engineering A, 528 (7-8), pp. 3193-3199.

Ball, R. J., Evans, R., Deven, M. and Stevens, R., 2002. Characterisation of defects observed within the positive grid corrosion layer of the valve regulated lead/acid battery. Journal of Power Sources, 103 (2), pp. 207-212.

Ball, R. J., Evans, R. and Stevens, R., 2002. Characterisation of separator papers for use in valve regulated lead/acid batteries. Journal of Power Sources, 104 (2), pp. 208-220.

Ball, R. J., Evans, R. and Stevens, R., 2002. Finite element (FE) modelling of current density on the valve regulated lead/acid battery positive grid. Journal of Power Sources, 103 (2), pp. 213-222.

Ball, R. J., Evans, R., Thacker, E. L. and Stevens, R., 2003. Effect of valve regulated lead/acid battery positive paste carbon fibre additive. Journal of Materials Science, 38 (14), pp. 3013-3017.

Ball, R. J., Kurian, R., Evans, R. and Stevens, R., 2002. Failure mechanisms in valve regulated lead/acid batteries for cyclic applications. Journal of Power Sources, 109 (1), pp. 189-202.

Ball, R. J., Kurian, R., Evans, R. and Stevens, R., 2002. Study of valve-regulated lead/acid batteries manufactured with different separator papers. Journal of Power Sources, 104 (2), pp. 234-240.

Ball, R. J. and Stevens, R., 2002. Characterisation of Ce0.8Gd0.2O1.9/3Y-TZP composite electrolytes - Effects of 3Y-TZP particle treatment. Journal of Materials Science, 37 (19), pp. 4137-4144.

Ball, R. J. and Stevens, R., 2003. Characterisation of Ce0.8Gd0.2O1.9/3Y-TZP composite electrolytes-effects of weight % 3Y-TZP particles. Journal of Materials Science, 38 (7), pp. 1413-1423.

Ball, R. J. and Stevens, R., 2002. Design aspects of the VRLA battery positive electrode. In: LABAT'02 International Conference on Lead Acid Batteries, 2002-06-10 - 2002-06-13.

Ball, R. J. and Stevens, R., 2003. Design aspects of the valve regulated lead/acid battery positive electrode. Journal of Power Sources, 113 (2), pp. 228-232.

Ball, R. J. and Stevens, R., 2001. Fabrication of novel microstructures to enhance ionic conductivity and mechanical properties for solid oxide fuel cell electrolytes. In: 103rd Annual General Meeting of the American Ceramic Society, 2001-04-22 - 2001-04-25.

Ball, R. J. and Stevens, R., 2001. Lead oxide corrosion layer growth on the positive valve regulated lead/acid battery grid. In: 103rd Annual General Meeting of the American Ceramic Society, 2001-04-22 - 2001-04-25.

Ball, R. J. and Stevens, R., 2002. Novel composite electrolytes for solid oxide fuel cell applications. In: 26th Annual Conference on Composites, Advanced Ceramics Materials ans Structures, 2002-01-01.

Balnave, J. and Adeyeye, K., 2013. A Comparative Study of Attitudes and Preferences for Water Efficiency in Homes. Journal of Water Supply: Research and Technology - AQUA, 62 (8), pp. 515-524.

Barclay, K. and Heath, A., 2015. The costs of housing developments on sites with elevated landslide risk in the UK. IOP Conference Series: Earth and Environmental Science, 26 (1), 012037.

Barclay, M., Kang, J. and Sharples, S., 2011. Exploring acoustic and time-scales issues relating to the thermal physics of buildings. In: 5th International Symposium on Temporal Design (ISTD), 2011, 2011-07-21 - 2011-07-22.

Barclay, M., Kang, J., Sharples, S., Wang, B. and Du, H., 2010. The challenge of balancing the demands for a comfortable thermal and acoustic built environment in a sustainable future. In: International Symposium on Sustainability in Acoustics (ISSA), 2010, 2010-08-30 - 2010-08-31.

Barclay, M., Kang, J. and Sharples, S., 2012. Combining noise mapping and ventilation performance for non-domestic buildings in an urban area. Building and Environment, 52, pp. 68-76.

Barclay, M., Sharples, S., Kang, J., Wang, B. and Du, H., 2010. Estimating urban natural ventilation potential by noise mapping and building energy simulation. In: 20th International Congress on Acoustics 2010, ICA 2010, 2010-08-23 - 2010-08-27.

Barclay, M., Sharples, S., Kang, J. and Watkins, R., 2012. The natural ventilation performance of buildings under alternative future weather projections. Building Services Engineering Research and Technology, 33 (1), pp. 35-50.

Barnes, M., 2003. Design Project Teaching of Lightweight Structures. In: International Symposium on Tensile Architecture, 2003-09-01.

Barnes, M. and Forster, B., 2004. Design Basis and Safety Criteria (for tensile structures). In: Forster, B. and Mollaert, M., eds. European Design Guide for Tensile Surface Structures. Brussels: Tensinet, pp. 177-189.

Barnes, M., Grundig, L. and Moncreiff, E., 2004. Form-finding, Analysis and Patterning. In: Forster, B. and Mollaert, M., eds. European Design Guide for Tensile Surface Structures. Brussels: Tensinet, p. 205.

Barnes, M.R., Adriaenssens, S. and Krupka, M., 2013. A novel torsion/bending element for dynamic relaxation modeling. Computers and Structures, 119, pp. 60-67.

Barnes, M., 1994. Form and stress engineering of tension structures. Structural Engineering Review, 6 (3).

Barnes, M. R., 1999. Form finding and analysis of tension structures by dynamic relaxation. International Journal of Space Structures, 14 (2), pp. 89-104.

Barron, M., 2007. Auditorium acoustics a room acoustician's perspective. In: Proceedings of the Institute of Acoustics, 2007-01-01.

Barron, M., 2004. ISO3382 - how good are the acoustics really? In: International Symposium on Room Acoustics: Design and Science 2004, 2004-05-01.

Barron, M., 2001. Late lateral energy fractions and the envelopment question in concert halls. Applied Acoustics, 62, 185--202.

Barron, M., 2001. Listener envelopment in concert halls in concert halls and sound from behind. In: Proceedings of the 17th International Congress of Acoustics, 2001-01-01.

Barron, M., 2002. The accuracy of acoustic scale modelling at 1:50 scale. In: Institute of Acoustics, 2007-08-31.

Barron, M., 2004. The current status of spatial impression in concert halls. In: 8th International Congress on Acoustics, 2004-01-01.

Barron, M., 2006. The development of concert hall design: a 111 year experience. In: Institute of Acoustics - Spring Conference Futures in Acoustics 2006: Today's Research - Tomorrow's Careers, 2006-04-02 - 2006-04-03.

Barron, M., 2002. The value of ISO3382 for research and design. In: Institute of Acoustics, 2007-08-31.

Barron, M., 2005. Thoughts on the room acoustic enigma: the state of diffusion. In: Proceedings of the Institute of Acoustics, 2007-01-01.

Barron, M., 2005. Using the standard on objective measures for concert auditoria, ISO3382, to give reliable results. Acoustical Science and Technology, 26, 162--169.

Barron, M., 2007. When is a concert hall too quiet? In: Proc. of the 19th International Congress on Acoustics, 2007-01-01.

Barron, M. and Coleman, S., 2001. Measurements of the absorption by auditorium seating a model study. Journal of Sound and Vibration, 239, 573--587.

Barron, M. and Dammerud, J., 2006. Stage acoustics in concert halls - early investigations. Proceedings of the Institute of Acoustics, 28 (2), pp. 1-12.

Barron, M., 2008. Objective assessment of concert hall acoustics. In: International Conference on Auditorium Acoustics 2008, 2008-10-03 - 2008-10-05.

Barron, M., 1997. 21 years of acoustic scale model testing. Proceedings of the Institute of Acoustics, 19, pp. 67-80.

Barron, M., 1997. Acoustic Scale Model Testing over 21 Years. Acoustics Bulletin, 22 (3), pp. 5-12.

Barron, M., 1998. Early decay times in the Christchurch and Wellington Concert halls, New Zealand. Journal of the Acoustical Society of America (JASA), 103 (4), pp. 2229-2231.

Barron, M., 1996. Loudness in concert halls. In: Forum Acusticum, 1996-01-01.

Barron, M., 2008. Science and music: Raising the roof. Nature, 453 (7197), pp. 859-860.

Barron, M., 1999. Spatial Impression and envelopment in concert halls. Proceedings of the Institute of Acoustics, 21 (6), pp. 163-170.

Barron, M., 1998. Spatial impression as measured in concert and opera auditoria. In: 16th International Congress on Acoustics and the 135th meeting of the Acoustical Society of America (ICA/ASA `98), 1998-06-20 - 1998-06-26.

Barron, M., 2009. Then and now - how concert hall design of the 1960s and '70s compares with the present. In: NAG/DAGA 2009 International Conference on Acoustics, 2009-03-23 - 2009-03-26.

Barron, M., 1998. Three current concert hall design forms and their acoustics. In: Proceedings of the Autumn Meeting of the Acoustical Society of Japan, 1998-01-01.

Barron, M. and Coleman, S., 1998. Absorption by seating and audience-whose figures, whose measurement method? In: 16th International Congress on Acoustics and the 135th meeting of the Acoustical Society of America (ICA/ASA `98), 1998-06-20 - 1998-06-26.

Bawcombe, J., 2012. A Study of Douglas-Fir Anatomical and Mechanical Properties and their Interactions. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Bawcombe, J., Harris, R., Walker, P. and Ansell, M., 2015. The quality of Douglas-fir grown in the United Kingdom. Proceedings of the Institution of Civil Engineers: Construction Materials, 168 (3), pp. 99-109.

Baïri, A., San Martin, D., Bairi, I., Adeyeye, K., She, K., Hocine, A., Alilat, N., Bauzin, J.G., Lamriben, C., Chanetz, B. and Laraqi, N., 2016. Forthcoming. Aerodynamics in the open channel of the Sistan-type wind-mill with vertical axis wind turbine. International Journal of Numerical Methods in Heat and Fluid Flow

Beadle, K. and Shea, A., 2013. Post-occupancy evaluation of a mixed-use academic office building. In: Hakansson, A., Hojer, M., Howlett, R. J. and Jain, L. C., eds. International Conference on Sustainability in Energy and Buildings 2012, 2012-09-03 - 2012-09-05. Berlin: Springer, pp. 501-510. (Smart Innovation, Systems and Technologies; 22)

Bejarano, M., Heath, A. and Harvey, J., 2003. A Low-Cost High-Performance Alternative for Controlling a Servo-Hydraulic System for Triaxial Resilient Modulus Apparatus. ASTM Special Technical Publications, 1437, pp. 129-140.

Bekas, D., Grammatikos, S. A., Kouimtzi, C. and Paipetis, A. S., 2015. Linear and non-linear electrical dependency of carbon nanotube reinforced composites to internal damage. In: Advanced Materials for Demanding Applications. IoP Publishing. (IOP Conference Series: Materials Science and Engineering; 74)

Bekessey, S., Hayles, C. S., Holdsworth, S. E. and Thomas, I., 2006. Framework for education for sustainable development in universities:the beyond leather patches (BELP) project at RMIT. In: 6th Australasian Conference of Sustainable Tertiary Education, 2006, 2006-09-20 - 2006-09-22.

Benente, F., Parodi, V., Pesce, G., Garbarino, G. B. and Lassa, S., 1999. Progetto d'indagine dell'insediamento abbandonato di Pian dei Costi (Borzonasca - GE). Campagna d'indagine 1999. Notizie preliminari. Archeologia Postmedievale, 3, pp. 21-30.

Bentley, R., Anstey, B., Callear, J., Chonavel, S., Clark, I., Collins, I., Ramallo Gonzalez, A., Scanlon, H. and Weatherby, C., 2010. The Whitfield Solar CPV Collector.

Bernal, S. A., Hussein, O. H., Mundra, S., Ball, R., Heath, A. and Provis, J. L., 2014. Alkali-activated binders based on biomass fly ash.

Bernal, S. A., Mundra, S., Hussein, O. H., Ball, R., Heath, A. and Provis, J. L., 2014. Biomass fly ash as precursor for alkali-activated materials.

Bernardini, A., D'Ayala, D. F., Meroni, F., Pessina, V. and Valluzzi, M. R., 2008. Damage scenarios in the Vittorio Veneto town center (NE Italy). Bollettino di Geofisica Teorica e Applicata, 49 (3-4), pp. 505-512.

Bernardini, A., D'Ayala, D. F., Modena, C., Speranza, E. and Valluzzi, M. R., 2008. Vulnerability assessment of the historical masonry building typologies of Vittorio Veneto (NE Italy). Bollettino di Geofisica Teorica e Applicata, 49 (3-4), pp. 463-484.

Bertelsen, S. and Emmitt, S., 2005. Getting to grips with client complexity. In: Emmitt, S. and Prins, M., eds. Designing Value. Rotterdam, The Netherlands: , pp. 61-68.

Bertelsen, S. and Emmitt, S., 2005. The client as a complex system. In: Proceedings of 13th Annual Conference of the International Group on Lean Construction (IGLC) , 2005. , pp. 73-80.

Bertelsen, S. and Emmitt, S., 2005. The clients as a complex system. In: Boussabaine, A. H. and Lewis, J., eds. Proceedings of the 1st International Conference on Built Environment Complexity (BECON), 2005. , pp. 117-126.

Bevan, R., Woolley, T., Pritchett, I., Carpenter, R., Walker, P. and Duckett, M., 2008. Hemp Lime Construction: a guide to building with hemp lime composites. BRE Press.

Bhooshan, S., 2016. Interactive Design of Curved‐Crease‐Folding. Thesis (Master of Philosophy (MPhil)). University of Bath.

Bhooshan, S., Bhooshan, V., Sayed, M., Chandra, S., Richens, P. and Shepherd, P., 2015. Applying dynamic relaxation techniques to form-find and manufacture curve-crease folded panels. Simulation : Transactions of The Society for Modeling and Simulation International, 91 (9), pp. 773-786.

Biagini, M., Casale, M., Castagnasso, S., Costa, S., Mannoni, T., Martini, S. and Pesce, G., 2004. Indagini archeologiche in alta val Trebbia e alta valle Scrivia. Lo scavo del castello di Donnetta (GE). Relazione preliminaire sulla prima campagna di scavo. Ligures, 2, pp. 85-106.

Bisanda, E. T. N. and Ansell, M. P., 1992. Properties of Sisal-CNSL Composites. Journal of Materials Science, 27 (6), pp. 1690-1700.

Bisanda, E. T. N. and Ansell, M. P., 1991. The Effect of Silane Treatment on the Mechanical and Physical-Properties of Sisal-Epoxy Composites. Composites Science and Technology, 41 (2), pp. 165-178.

Blakeborough, A., Williams, M., Darby, A. and Woodward, N., 1998. First Experiment in the new Structural Dynamics Laboratory at Oxford: Prototype Tests on Knee Elements. In: 11th European Conference on Earthquake Engineering, 1998-01-01.

Blakeborough, A., Williams, M., Darby, A. and Woodward, N., 1999. Full Scale Testing of Dissipative Knee Elements for Steel Frames. In: 8th Canadian Conference on Earthquake Engineering, 1999-01-01.

Blakeborough, A., Williams, M. S., Darby, A. and Williams, D. M., 2001. The development of real-time substructure testing. Philosophical Transactions of the Royal Society A - Mathematical, Physical and Engineering Sciences, 359, p. 1869.

Blenkinsop, T. and Walker, P., 1994. Geological Influences on the Location and Construction of Great Zimbabwe. Transactions of the Zimbabwe Scientific Association, 68, pp. 25-31.

Blenkinsopp, C. and Chaplin, J.R., 2005. Measurements of air/water interfaces in plunging breaking waves. In: Grue, J., ed. 20th International Workshop on Water Waves and Floating Bodies, 2005-05-19 - 2005-06-01. IWWWFB.

Blenkinsopp, C. and Chaplin, J.R., 2007. Validity of small-scale models involving breaking waves. In: Malenica, S. and Senjanovic, I., eds. 22nd International Workshop on Water Waves and Floating Bodies, 2007-04-15 - 2007-04-18. IWWWFB, pp. 13-16.

Blenkinsopp, C., Turner, I.L., Masselink, G. and Russell, P.E., 2009. Field measurements of net sediment flux from individual swashes on a sandy beach. In: Mizuguchi, M. and Sato, S., eds. Coastal Dynamics 2009 - Impacts of Human Activities on Dynamic Coastal Processes, 2011-09-07 - 2011-09-11. World Scientific.

Blenkinsopp, C. E., Matias, A., Howe, D., Castelle, B., Marieu, V. and Turner, I. L., 2015. Wave runup and overwash on a prototype-scale sand barrier. Coastal Engineering

Blenkinsopp, C.E. and Chaplin, J.R., 2010. Bubble size measurements in breaking waves using optical fiber phase detection probes. IEEE Journal of Oceanic Engineering, 35 (2), pp. 388-401.

Blenkinsopp, C.E. and Chaplin, J.R., 2008. The effect of relative crest submergence on wave breaking over submerged slopes. Coastal Engineering, 55 (12), pp. 967-974.

Blenkinsopp, C.E. and Chaplin, J.R., 2007. Void fraction measurements in breaking waves. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 463 (2088), pp. 3151-3170.

Blenkinsopp, C.E., Mole, M.A., Turner, I.L. and Peirson, W.L., 2010. Measurements of the time-varying free-surface profile across the swash zone obtained using an industrial LIDAR. Coastal Engineering, 57 (11-12), pp. 1059-1065.

Blenkinsopp, C.E., Turner, I.L., Allis, M.J., Peirson, W.L. and Garden, L.E., 2012. Application of LiDAR technology for measurement of time-varying free-surface profiles in a laboratory wave flume. Coastal Engineering, 68, pp. 1-5.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.E., 2011. Can standard energetics models be used to predict net cross-shore sediment flux at the beach face? Australian Journal of Civil Engineering, 9 (1), pp. 19-34.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.E., 2011. Swash zone sediment fluxes:field observations. Coastal Engineering, 58 (1), pp. 28-44.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.E., 2010. Validation of volume continuity method for estimation of cross-shore swash flow velocity. Coastal Engineering, 57 (10), pp. 953-958.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.R., 2009. Measurements of net cross-shore sediment flux at the timescale of individual swashes. In: 19th Australasian Coastal and Ocean Engineering Conference 2009 and the 12th Australasian Port and Harbour Conference 2009 (COASTS AND PORTS 2009), 2009-09-16 - 2009-09-18. Curran Associates, pp. 759-767.

Blenkinsopp, C.E., Turner, I.L., Mole, M.A., Garden, L. and Peirson, W.L., 2011. Light detection and ranging (LiDAR) for measurement of coastal processes. In: 20th Australasian Coastal and Ocean Engineering Conference 2011, COASTS 2011 and the 13th Australasian Port and Harbour Conference 2011, PORTS 2011, 2011-09-28 - 2011-09-30. NY: Curran Associates, pp. 757-762.

Blenkinsopp, C., Matias, A., Howe, D., Castelle, B. and Marieu, V., 2014. Laboratory investigation of wave runup on a prototype-scale sand barrier. In: American Geophysical Union Ocean Sciences Meeting, 2014-02-24 - 2014-02-28.

Blenkinsopp, C., Turner, I. L., Russell, P.E. and Masselink, G., 2008. Bed-level Change in the Swash Zone at Wave-by-Wave Timescales.

Boardman, B., Darby, S., Killip, G., Hinnells, M., Jardine, C. N., Palmer, J., Sinden, G., Lane, K., Layberry, R., Wright, A., Newborough, M., Natarajan, S. and Peacock, A., 2005. 40% House. Environmental Change Institute, University of Oxford.

Boato, A., Martini, S. and Pesce, G., 2005. La costruzione dei terrazzamenti a secco nel Parco Nazionale delle Cinque Terre (SP):codificazione di un sapere empirico. In: Mochi, G., ed. Atti del seminario internazionale. Bologna, Italy: Edizioni Moderna.

Boato, A., Martini, S. and Pesce, G., 2002. Ricerche sui terrazzamenti delle Cinque Terre. Notiziario di Archeologia Medievale, 75, pp. 7-8.

Bokhove, O., Patterson, M. D. and Peregrine, D. H., 2001. Breaking shallow water wave simulations in the surf and swash zone. In: Proceedings of the 27th International Conference on Coastal Engineering, ASCE, 2001-01-01.

Bonal, J., Donohue, S. and McNally, C., 2008. Examination of a novel wavelet approach for bender element testing. In: Conference on Bridge and Infrastructure Research in Ireland, 2008-12-01.

Bonal, J., Donohue, S. and McNally, C., 2012. Wavelet analysis of bender element signals. Geotechnique, 62 (3), pp. 243-252.

Bonfield, P. W. and Ansell, M. P., 1991. Fatigue Properties of Wood in Tension, Compression and Shear. Journal of Materials Science, 26 (17), pp. 4765-4773.

Bonfield, P. W., Hacker, C. L., Ansell, M. P. and Dinwoodie, J. M., 1994. Fatigue and Creep of Chipboard .1. Fatigue at R=0.01. Wood Science and Technology, 28 (6), pp. 423-435.

Boon, D., Fraser, S., Free, M., Grant, D., Mason, A., Paganoni, S., Wilkinson, S. and Williams, E., 2013. Observations and implications of damage from the magnitude Mw6.3 Christchurch, New Zealand earthquake of 22 February 2011. Bulletin of Earthquake Engineering, 11 (1), pp. 107-140.

Boura, O., Diamanti, E. K., Grammatikos, S. A., Gournis, D. and Paipetis, A. S., 2013. Carbon nanotube growth on high modulus carbon fibres:Morphological and interfacial characterization. Surface and Interface Analysis, 45 (9), pp. 1372-1381.

Bourdakis, V. and Day, A., 1997. A VRML model of Bath. In: Design and the Net, 1997-01-01.

Bradley, A., Chang, W.-S. and Harris, R., 2014. The effect of drying condition on post flooding mechanical properties of timber shear walls. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Bradley, A., Chang, W.-S. and Harris, R., 2015. The effect of drying on timber frame connections post flooding. Proceedings of the Institution of Civil Engineers: Construction Materials:, 168 (3), pp. 144-157.

Brandon, D., 2015. Fire and structural performance of non-metallic timber connections. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Brandon, D., Ansell, M. P., Harris, R., Walker, P. and Bregulla, J., 2014. Modelling of non-metallic timber connections at elevated temperatures. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 231-241. (RILEM Bookseries; 9)

Brandon, D., Ansell, M., Bregulla, J., Harris, R. and Walker, P., 2014. Behaviour of non-metallic shear connections in fire. In: World Conference on Timber Engineering: Renaissance of Timber Construction, WCTE 2014, 2014-08-10 - 2014-08-14.

Brandon, D. and Leijten, A., 2014. Structural performance and advantages of DVW reinforced moment transmitting timber joints with steel plate connectors and tube fasteners. In: Aicher, S., Reinhardt, H.-W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 255-263. (RILEM Bookseries; 9)

Brandon, D., Maluk, C., Ansell, M. P., Harris, R., Walker, P., Bisby, L. and Bregulla, J., 2015. Fire performance of metal-free timber connections. Proceedings of Institution of Civil Engineers: Construction Materials, 168 (4), pp. 173-186.

Brandon, D., Thomson, A., Ansell, M. P., Bregulla, J., Harris, R. and Walker, P. J., 2014. Stiffness modelling of non-metallic timber connections with pultruded dowels. In: InCIEC 2013 International Civil and Infrastructure Engineering Conference, 2013-09-22 - 2014-01-24.

Brandon, G. and Day, A., 1997. The Impact of feedback on domestic energy consumption. In: Proceedings of the Sustainable Building Conference, 1997-01-01.

Brandon, G., Day, A. and Warhurst, A., 2000. Making domestic energy use visible. In: Towards a Collaborative Environment Research Agenda. London: Macmillian, pp. 58-74.

Brandt-Olsen, C., 2015. Harmonic form-finding for the design of curvature-stiffened shells. Thesis (Master of Philosophy (MPhil)). University of Bath.

Brennan, J., Pedreschi, R., Walker, P. and Ansell, M., 2013. The potential of advanced textiles for fabric formwork. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 229-237.

Brentan, B. M., Jr., E. L., Herrera, M., Izquierdo, J. and Pérez-García, R., 2017. Hybrid regression model for near real-time urban water demand forecasting. Journal of Computational and Applied Mathematics, 309, pp. 532-541.

Brewin, M., Kerwin, D. and McCombie, P., 2002. Evaluation of planar reconstruction accuracy for two techniques incorporating camera tilt. In: Scientific Proceedings of the XXth International Symposium on Biomechanics in Sports, 2002-01-01.

Briggs, K. M., Smethurst, J. A., Powrie, W., O'Brien, A. S. and Butcher, D. J. E., 2013. Managing the extent of tree removal from railway earthwork slopes. Ecological Engineering, 61 (C), pp. 690-696.

Briggs, K., 2010. Charing embankment: climate change impacts on embankment hydrology. In: Ground Engineering Magazine. , pp. 28-31.

Briggs, K., Loveridge, F. and Glendinning, S., 2016. Failures in transport infrastructure embankments. Engineering Geology Item availability may be restricted.

Briggs, K., Smethurst, J. and Powrie, W., 2014. Modelling the influence of tree removal on embankment slope hydrology. In: Sassa, K., Canuti, P. and Yin, Y., eds. Landslide Science for a Safer Geoenvironment. Springer, pp. 241-246.

Briggs, K., Smethurst, J., Powrie, W. and O'Brien, T., 2016. Interpreting the influence of tree root water uptake on the long term hydrology of a clay fill railway embankment. Transportation Geotechnics, 9, pp. 31-48. Item availability may be restricted.

Briggs, K. M., Smethurst, J. A., Powrie, W. and O'Brien, A. S., 2013. Wet winter pore pressures in railway embankments. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 166 (5), pp. 451-465.

Brookfield, E., Emmitt, S., Hill, R. and Scaysbrook, S., 2004. The architectural technologist's role in linking lean design with lean construction. In: Bertelsen, S. and Formoso, C. T., eds. Proceedings of 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 2004. Lean Construction, pp. 375-387.

Browning, G. G., Darby, A. P. and Walker, I., 2008. Human Perception of Vibrations due to Synchronised Crowd Loading. In: EURODYN 2008 - 7th European Conference on Structural Dynamics, 2008-07-07 - 2008-07-09.

Browning, G., 2011. Human perception of vibrations due to synchronised crowd loading in grandstands. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Bryant, L., 2006. Spatial and temporal variations in sediment oxygen demand as a function of sediment loading, oxygen concentration and turbulence. In: National Science Foundation(NSF) 2006 Integrative Graduate Education and Research Traineeship (IGERT) Project Meeting, 2006-05-14 - 2006-05-16.

Bryant, L., 2009. The effect of nanoparticles on redox gradients at the sediment-water interface. In: International Conference for Environmental Implications of Nanotechnology & EPA Nano Grantees Meeting, 2011-05-09 - 2011-05-11, Washington Duke Inn, Durham, NC.

Bryant, L., Gantzer, P. A. and Little, J. C., 2011. Increased sediment oxygen uptake caused by oxygenation-induced hypolimnetic mixing. Water Research, 45 (12), pp. 3692-3703.

Bryant, L., Hsu-Kim, H., Gantzer, P. A. and Little, J. C., 2011. Solving the problem at the source:Controlling Mn release at the sediment-water interface via hypolimnetic oxygenation. Water Research, 45 (19), pp. 6381-6392.

Bryant, L., Little, J. C. and Bürgmann, H., 2012. Response of sediment microbial community structure in a freshwater reservoir to manipulations in oxygen availability. FEMS Microbiology Ecology, 80 (1), pp. 248-263.

Bryant, L., Lorrai, C., McGinnis, D. F., Brand, A., Wüest, A. and Little, J. C., 2010. Variable sediment oxygen uptake in response to dynamic forcing. Limnology and Oceanography, 55 (2), pp. 950-964.

Bryant, L., Mauldon, M. and Mitchell, J. K., 2003. Geotechnical problems with pyritic rock and soil. Virginia Tech Center for Geotechnical Practice and Research (CGPR).

Bryant, L., McGinnis, D. F., Lorrai, C., Brand, A., Little, J. C. and Wüest, A., 2010. Evaluating oxygen fluxes using microprofiles from both sides of the sediment-water interface. Limnology and Oceanography, 8 (Nov), pp. 610-627.

Bucur, V., Ansell, M. P., Barlow, C. Y., Pritchard, J., Garros, S. and Deglise, X., 1998. Physical methods for characterizing wood composite panel products. Holzforschung, 52 (5), pp. 553-561.

Burton, R., Dickson, M. and Harris, R., 1998. The Use of Roundwood Thinnings in Buildings : A Case Study. Building Research and Information, 26 (2), pp. 76-93.

CODINHOTO, R., MINOZZO, D., HOMRICH, M. and FORMOSO, C., 2003. Análise de restrições: definição e indicador de desempenho. In: III Simpósio Brasileiro de Gestão e Economia da Construção - III SIBRAGEC, 2003-09-16 - 2003-09-19.

Cagnana, A., Aurilia, G., Baldassarri, M., Ghidotti, P., Giovinazzo, R., Nervi, C., Pesce, G., Piccardi, E. and Raffelini, C., 2001. Gli scavi nel castello di Celasco (Monte Bardellone, La Spezia). Relazione preliminare sulle campagne 1996-1999. Archeologia Medievale, 28, pp. 147-148.

Cagnana, A., Ghidotti, P. and Pesce, G., 2001. Terza campagna di scavi nel sito incastellato di Monte Bardellone. Notiziario di Archeologia Medievale, 73, pp. 10-11.

Calabria, J., 2004. Avaliacao microestrutural de um tijolo macico queimado. In: 48th Brazilian Congress on Ceramics, 2004-01-01.

Calabria, J., 2004. Avaliacao microestrutural de um tijolo macico queimado. In: Proceedings of the 48th Brazilian Congress on Ceramics, 2004. Brazil: .

Calabria, J., 2003. Nanostructural evolution of structural bricks. In: II Congress of the Brazilian Materials Research Society, 2003-01-01.

Calabria, J., 2003. Nanostructural evolution of structural bricks. In: Proceedings of II Congress of the Brazilian Materials Research Society. Brazil: .

Calabria, J. and Vaconselos, W. L., 2004. Structural evaluation of an adobe from Minas Gerais. In: Pecchio, M., ed. Applied mineralogy: developments in science and technology. International Council for Applied Mineralogy.

Calabria, J., Vasconcelos, W. L. and Boccaccini, A. R., 2009. Microstructure and chemical degradation of adobe and clay brick. Ceramics International, 35 (2), pp. 665-671.

Calabria, J., Vasconcelos, W. L., Doni, D. J., Chater, R., McPhail, D. and Boccaccini, A. R., 2010. Synthesis of sol-gel titania bactericide coatings on adobe brick. Construction and Building Materials, 24 (3), pp. 384-389.

Calabria, J. and Vasconselos, W. L., 2004. Geometric description of nanoporous earth bricks. In: III Congress of the Brazilian Materials Research Society, 2004-01-01.

Calabria, J. and Vasconselos, W. L., 2004. Geometric description of nanoporous earth bricks. In: Proceedings of the III Congress of the Brazilian Materials Research Society. Brazil: .

Calabria, J., Vasconselos, W. L., Chater, R., McPhail, D. and Boccaccini, A. R., 2007. Physical evaluation on sustainable clay based building materials (adobe) modified by sol-gel coating. In: 10th ECERS proceedings, 2007-01-01.

Calabria, J., Vasconselos, W. L., Chater, R., McPhail, D. and Boccaccini, A. R., 2007. Surface functionality evaluation on sustainable clay based building materials modified by sol-gel. In: The 8th International Conference of Eco-Materials (ICEM8), 2007-07-09 - 2007-07-11.

Calabria, J., Vasconselos, W. L., Magalhaes, R. S. C. and Ferreira, M., 2004. Chemical leaching in nanoporous structural ceramics. In: Proceedings of III Congress of the Brazilian Materials Research Society, 2004-01-01.

Calabria, J., Vasconselos, W. L., Magalhaes, R. S. C. and Ferriera, M., 2004. Chemical leaching in nanoporous structural ceramics. In: Proceedings of Congress of the Brazilian Materials Research Society. Brazil: .

Calabrias, J. and Vasconselos, W. L., 2004. Estrutura de um adobe da regiao de Tiradentes, Minas Gerais. In: 48th Brazilian Congress on Ceramics, 2004-01-01.

Cano-Lopez, P., Copping, A. and Bullock, K., 2008. Introducing an innovative approach to supporting work-based learning for specialist trade operatives. In: Association of Researchers in Construction Management, ARCOM 2008: Proceedings of the 24th Annual Conference.Vol. 1. , pp. 33-41.

Cardoso, R., Lopes, M., Bento, R. and D'Ayala, D., 2003. Historic, braced frame timber buildings with masonry infill ('Pombalino' buildings), no. 92. In: EERI, World Housing Encyclopedia, http://www.world-housing.net/, 2004-01-01.

Carfrae, J., De Wilde, P., Goodhew, S., Walker, P. and Littlewood, J., 2008. Totnes eco house: Interaction between design and in-situ monitoring. In: PLEA 2008 - Towards Zero Energy Building: 25th PLEA International Conference on Passive and Low Energy Architecture, Conference Proceedings. .

Carfrae, J., De Wilde, P., Littlewood, J., Goodhew, S. and Walker, P., 2011. Development of a cost effective probe for the long term monitoring of straw bale buildings. Building and Environment, 46 (1), pp. 156-164.

Casadei, P., Denton, S. R., Nanni, A. and Ibell, T. J., 2003. Moment redistribution in continuous CFRP-strengthened concrete members. In: Composites in Construction 2003 – International Conference, 2003-01-01.

Casadei, P., Ibell, T. and Nanni, A., 2002. Behavior of one-way and two-way RC slabs with openings strengthened with CFRP composites. In: ACI Fall Convention, 2002-01-01.

Casadei, P., Ibell, T. and Nanni, A., 2003. Experimental results of one-way slabs with openings strengthened with CFRP laminates. In: Fibre-reinforced polymer reinforcement for concrete structures FRPRCS6, 2003-01-01.

Casadei, P., McCombie, P., Galati, N. and Nanni, A., 2006. NDT Monitoring of Bridges using Innovative High Precision Surveying System. In: IABSA Symposium, 2006-09-01.

Casadei, P., Nanni, A. and Ibell, T. J., 2003. Experimentation on two-way RC slabs with openings strengthened with CFRP laminates. In: Advancing in Composites 2003-Sixth International Exhibition for Plastics and Rubber Industries (PLAST), 2003-01-01.

Casapulla, C. and D'Ayala, D., 2001. Lower bound approach to the limit analysis of 3D vaulted block masonry structures. In: Computer methods in Structural Masonry,, 2001-01-01.

Casapulla, C. and D'Ayala, D. F., 2006. In plane collapse behaviour of masonry walls with frictional resistance and openings. In: Structual Analysis of Historical Construction V, 2006-11-01.

Castellarin, A., Kohnová, S., Gaal, L., Fleig, A., Salinas, J. L., Toumazis, A., Kjeldsen, T. R. and MacDonald, N., 2012. Review of applied statistical methods for flood frequency analysis in Europe:WG2 of COST Action ES0901. (NERC) Centre for Ecology & Hydrology.

Caulfield, C. P. and Patterson, M. D., 2005. Stratified mixing: Quantitative comparison of numerical simulations and laboratory experiments. In: Fundamentals of Fluid Flows, 2005-12-14 - 2005-12-15.

Caulfield, C. P., Patterson, M. D., McElwaine, J. N. and Dalziel, S. B., 2005. Mixing efficiency in lock release gravity currents. In: American Physical Society, Division of Fluid Dynamics 58th Annual Meeting, 2005-11-20 - 2005-11-22.

Causon, D. M., Ingram, D. M., Mingham, C. G., Zang, J., Hu, K. and Zhou, J. G., 2001. Numerically simulating of seawall overtopping. In: Coastal Engineering 2000, 2001-01-01.

Cavaciocchi, P., Lastrico, C., Molinari, A., Pesce, G. and Soppa, S., 2009. Studi sull’antica Chiesa di San Nicolò di Capodimonte a Camogli. Tipografia Berrone.

Cavaciocchi, P., Guastella, R., Lastrico, C., Pesce, G. and Vecchiattini, R., 2008. La chiesa di S.Nicolò di Capodimonte (Camogli - GE):un approccio multidisciplinare al problema del restauro di un edificio restaurato. In: Biscontin, G. and Driussi, G., eds. Atti del Convegno Internazionale 'Scienza e Beni Culturali. Restarare i restauri. Metodi, compatibilità, cantien. Padova, Italy: Edizioni Arcadia Ricerche.

Chang, W. and Nearchou, N., 2013. Investigation of the potential of hot-pressed wood in all-timber connections. In: Schober, K.-U., ed. Innovative timber composites – improving wood with other materials. , pp. 21-25.

Chang, W. S., Thomson, A., Walker, P. and Harris, R., 2009. Optimization of the all-wood pegged beam-to-beam timber connections. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Chang, W.-S., Murakami, S., Komatsu, K., Araki, Y., Shrestha, K., Omori, T. and Kainuma, R., 2013. Technical note: Potential to use shape memory alloy in timber dowel-type connections. Wood and Fiber Science, 45 (3), pp. 330-334.

Chang, W. S., 2009. Reinforcement of traditional timber shear walls. In: 1st International Symposium of Indonesian Wood Research Society., 2009-01-01.

Chang, W. S., Chen, C. J. and Hsu, M. F., 2004. Examining types of timber joints in traditional Chuan-Dou timber frame by stress wave method. Journal of Architecture, 50, pp. 1-13.

Chang, W. S. and Hsu, M. F., 2010. Full-scale experiment on reinforced Taiwanese traditional timber frames. In: 11th World Conference on Timber Engineering (WCTE), 2010-06-20 - 2010-06-24.

Chang, W. S. and Hsu, M. F., 2003. Modified estimation method of fundamental periods of historic buildings with masonry shear walls in Taiwan. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture VIII. Southampton, UK: WIT Press, pp. 565-574. (International Series on Advances in Architecture)

Chang, W. S., Hsu, M. F. and Chen, W. C., 2005. A novel procedure for evaluating the rotational stiffness of traditional timber joints in Taiwan. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture IX. Southampton, UK: WIT Press, pp. 169-178.

Chang, W. S. and Hsu, M. F., 2001. Dynamic characteristics of adobe buildings in Taiwan. In: 1st International Conference on Planning and Design, 2001-01-01.

Chang, W. S. and Hsu, M. F., 2005. Evaluation of rotational performance of traditional nuki joint. In: 55th Annual Meeting of the Japan Wood Research Society, 2005-01-01.

Chang, W. S. and Hsu, M. F., 2005. Mechanical characteristics of traditional go-dou and stepped dovetail timber connections in Taiwan. Taiwan Journal of Forest Science, 20 (1), pp. 61-71.

Chang, W. S., Hsu, M. F. and Chang, J. S., 2001. Investigation on dynamic characteristics of historic buildings with traditional style by using ambient vibration measurement. In: 7th Conference on Inspection, Appraisal, Repairs and Maintenance of Buildings and Structures, 2001-01-01.

Chang, W. S., Hsu, M. F. and Chen, C. J., 2004. Estimating rotational stiffness of timber joints by using fractional factorial experiments combined with computer simulation. In: 8th World Conference on Timber Engineering, 2004-01-01.

Chang, W. S., Hsu, M. F. and Chen, W. J., 2006. Experimental study on traditional wooden shear walls in Taiwan. In: 9th World Conference on Timber Engineering, 2006-01-01.

Chang, W. S., Hsu, M. F. and Komatsu, K., 2006. Rotational performance of traditional Nuki joints with gap I:theory and verification. Journal of Wood Science, 52 (1), pp. 58-62.

Chang, W. S., Hsu, M. F., Komatsu, K. and Chen, W. J., 2007. On mechanical behavior of traditional timber shear wall in Taiwan II:simplified calculation and experimental verification. Journal of Wood Science, 53 (1), pp. 24-30.

Chang, W. S., Hsu, M. F. and Lo, M., 2008. Full-scale experiment on traditional timber frames of Taiwan. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05.

Chang, W. S., Jung, K., Kitamori, A., Hsu, M. F. and Komatsu, K., 2010. Experimental study of structural behaviour of Kumimono in Taiwanese traditional temple under varying vertical load. In: 60th Annual Meeting of the Japanese Wood Research Society, 2010-03-17 - 2010-03-19.

Chang, W. S. and Komatsu, K., 2010. Experiment on traditional timber connections subjected to bi-axial bending. In: 11th World Conference on Timber Engineering (WCTE), 2010-06-20 - 2010-06-24.

Chang, W. S., Komatsu, K., Hsu, M. F. and Chen, W. J., 2007. On mechanical behavior of traditional timber shear wall in Taiwan I:background and theory derivation. Journal of Wood Science, 53 (1), pp. 17-23.

Chang, W.-S., 2015. Repair and reinforcement of timber columns and shear walls - A review. Construction and Building Materials, 97, pp. 14-24. Item availability may be restricted.

Chang, W.-S. and Araki, Y., 2016. Use of shape memory alloy in construction:a critical review. Proceedings of the ICE - Civil Engineering, 169 (2), pp. 87-95. Item availability may be restricted.

Chang, W.-S. and Betts, R., 2015. Forthcoming. Dowel-type connections with multiple densified bamboo nails. Journal of Materials in Civil Engineering

Chang, W.-S., Hsu, M.-F. and Komatsu, K., 2011. A new proposal to reinforce planked timber shear walls. Journal of Wood Science, 57 (6), pp. 493-500.

Chang, W.-S. and Nearchou, N., 2015. Hot-pressed dowels in bonded-in rod timber connections. Wood and Fiber Science, 47 (2), pp. 199-208.

Chang, W.-S., Reynolds, T., Harris, R. and Mosalam, K., 2014. Using smartphone to identify dynamic characteristics of timber bridges. In: COST – Timber Bridges Conference 2014, 2014-09-25 - 2014-09-26.

Chang, W.-S., Shanks, J., Kitamori, A. and Komatsu, K., 2009. The structural behaviour of timber joints subjected to bi-axial bending. Earthquake Engineering and Structural Dynamics, 38 (6), pp. 739-757.

Chang, W.-S., Thomson, A., Harris, R., Walker, P. and Shanks, J., 2011. Development of all-wood connections with plywood flitch plate and oak pegs. Advances in Structural Engineering, 14 (2), pp. 123-132.

Chang, W.-S., Wakita, T., Kitamori, A., Komatsu, K., Kataoka, Y. and Hsu, M.-F., 2012. Dynamic Properties of a Traditional Complex Bracket Sets in an Oriental Temple. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Chapman, J., Reynolds, T. and Harris, R., 2012. A 30 level cross laminated timber building system and analysis of the eurocode dynamic wind loads. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Charrington, H. J., 2013. Harry Charrington on Aalto's relationship with America. Architectural Research Quarterly, 17 (1), pp. 89-91.

Charrington, H., 2012. Alvar Aalto. Architectural Review, 1384, pp. 110-111.

Charrington, H., 2012. A persuasive topology:Alvar Aalto and the ambience of history. In: Emmons, P., Hendrix, J. and Lomholt, J., eds. The Cultural Role of Architecture: Contemporary and Historical Perspectives. London: Routledge, pp. 102-113.

Charrington, H., 2006. Alvar Aalto and the Primitive Suburb. In: Odgen, J., Samuel, F. and Sharr, A., eds. Primitive: Original Matters in Architecture. London: Routledge, pp. 166-175.

Charrington, H., 2011. Coordinating method and art: Alvar Aalto at play. Architectural History: Journal of the Society of Architectural Historians of Great Britain, 54, pp. 309-345.

Charrington, H., 2000. Grammar of Estonian Architecture. In: Harm, A. and Maiste, T., eds. Simulacrum City. Tallinn: Eesti Arhitektide Liit, pp. 38-62.

Charrington, H., 1998. Metaphor and forgetting in the city. In: Haapala, A., ed. Metaphor and the City. Helsinki: International Institute of Aesthetics, pp. 62-75.

Charrington, H., 1996. Mika on Portfolio? What is a Portfolio? Finish Ministry of Education, Helsinki.

Charrington, H., 2010. Nordic architects write. Architectural Theory Review, 15 (3), pp. 396-397.

Charrington, H., 2010. Not a locked box: the everyday art of the Aalto atelier. Architectural Research Quarterly, 14 (3), pp. 255-266.

Charrington, H., 2001. Postscript. In: Kunnapu, V., ed. Ule Punase Joe - Across the Red River. Tallinn Tehnikakorgkool, pp. 234-236.

Charrington, H., 2003. The dignity of the everyday. Architectural Research Quarterly, 7 (2), pp. 100-101.

Charrington, H. and Devereux, M., 2008. Design Champions: Housing [conference chair & organiser]. In: Design Champions: Street & Block, 2009-04-01.

Charrington, H. and Devereux, M., 2009. Design Champions: Street and Block [conference chair & organiser]. In: Design Champions: Street & Block, 2009-04-01.

Charrington, H., Leitch, D. and Tavernor, B., 1995. City thresholds. European Association for Architectural Education (EAAE) Proceedings

Charrington, H., Long, K. and Rattenbury, K., 2006. Cambridge, a conversation. Scroope, 17, xxiv-xxxv.

Charrington, H., 2011. On Designing and Building as a Group. In: Parvin, A., Saxby, D., Cerulli, C. and Schneider, T., eds. A Right to Build: The Next Mass-Housebuilding Industry. University of Sheffield, pp. 91-94.

Charrington, H. and Devereux, M., 2012. Making space for place: from development management to planning. In: Bahar Durmaz, K. B. &, ed. Proceedings of Designing Place: International Urban Design Conference 2012. Nottingham: University of Nottingham Press, pp. 117-129.

Cheah, J. S. J., Walker, P., Heath, A. and Morgan, T. K. K. B., 2012. Evaluating shear test methods for stabilised rammed earth. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (6), pp. 325-334.

Chem, C. J., Hsu, M. F. and Chang, W. S., 2003. In-situ evaluation of timber roof structures of historic buildings. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture VIII. Southampton, UK: WIT Press, pp. 815-824.

Chen, C. J. and Chang, W. S., 2005. Modern Wood Architecture (in Simplified Chinese). Tianjin University Press.

Chen, C. J., Chang, W. S. and Hsu, M. F., 2002. The feasibility of non-destructive investigations on structural assessment of historic buildings in Taiwan. In: 7th World Conference of Timber Engineering, 2002-08-01.

Chen, L., Morgan, G. C. J., Zang, J., Hillis, A. J. and Taylor, P. H., 2013. Modelling wave interactions with a surface-piercing vertical cylinder using OpenFOAM. In: The 28th International Workshop on Water Waves and Floating Bodies, 2013-04-07 - 2013-04-10, L'Isle sur la Sorgue.

Chen, L., Sun, L., Zang, J. and Hillis, A. J., 2014. Numerical Simulation of Wave-induced Roll of a 2-D Rectangular Barge Using OpenFOAM. In: the 29th International Workshop on Water Waves and Floating Bodies, 2014-03-30 - 2014-04-02.

Chen, L. and Zang, J., 2014. Numerical modelling of wave-current interaction with submerged breakwater using OpenFOAM. In: 10th UK Young Coastal Scientists and Engineers Conference, 2014-04-14 - 2014-04-15.

Chen, L., Zang, J., Hillis, A. J. and Plummer, A. R., 2013. Modelling of focused waves transformation and wave run-up at a beach using OpenFOAM. In: The 9th UK Young Coastal Scientists and Engineers Conference, 2013-03-25 - 2013-03-26.

Chen, L., 2015. Modelling of Marine Renewable Energy. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Chen, Q., Kelly, D. M., Spearman, J., Dimakopoulos, A., Zang, J. and Williams, C., 2015. CFD Modelling of Fall Pipe Rock Dumping Using PICIN. In: Coastal Sediments 2015, 2015-05-11 - 2015-05-15.

Chen, Q., Kelly, D. M., Dimakopoulos, A. S. and Zang, J., 2016. Validation of the PICIN solver for 2D coastal flows. Coastal Engineering, 112, pp. 87-98.

Chen, Q., Zang, J., Dimakopoulos, A. S., Kelly, D. M. and Williams, C. J. K., 2016. A Cartesian cut cell based two-way strong fluid-solid coupling algorithm for 2D floating bodies. Journal of Fluids and Structures, 62, pp. 252-271. Item availability may be restricted.

Chen, Q., Zang, J., Kelly, D., Williams, C. and Dimakopoulos, A., 2015. Particle–In–Cell Numerical Solver for Free Surface Flows with Fluid–Solid Interactions. In: 30th International Workshop on Water Waves and Floating Bodies, 2015-04-12 - 2015-04-15.

Chiang, T., 2015. Investigating the influence of in-home display design on energy-consumption behaviour. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Chiang, T., Walker, I. and Natarajan, S., 2011. The user-interface design of energy displays. In: Buildings Don't Use Energy, People Do?, 2011-06-27 - 2011-06-28.

Chiles, S. and Barron, M., 2004. Distribution of reflected sound levels in rooms with diffuse sound fields. In: 18th International Congress on Acoustics, 2004-01-01.

Chiles, S. and Barron, M., 2006. Optimising balcony overhangs. In: Proceedings of the Institute of Acoustics, 2007-01-01.

Chiles, S. and Barron, M., 2004. Sound level distribution and scatter in proportionate spaces. Journal of the Acoustical Society of America, 116, 1585--1595.

Chiles, S. and Barron, M., 2003. Sound level distribution in rooms: is it really the same everywhere? In: Proceedings of the Institute of Acoustics, 2007-01-01.

Chinowsky, P., Hayles, C. S., Schweikert, A. and Strzepek, N., 2010. Climate change as disaster:comparative impact on developing and developed countries. In: Engineering Project Organisations Conference 2010, 2010-11-04 - 2010-11-06.

Chinowsky, P., Hayles, C., Schweikert, A., Strzepek, N., Strzepek, K. and Schlosser, C. A., 2011. Climate change:Comparative impact on developing and developed countries. Engineering Project Organization Journal, 1 (1), pp. 67-80.

Chinowsky, P., Schweikert, A., Hayles, C. S., Strzepek, N. and Strzepek, K., 2012. Buildings & Climate Change: Methodology and Areas for Further Research:UNU-WIDER White Paper. Working Paper. iCliCS.

Chinowsky, P., Schweikert, A., Hughes, G., Hayles, C. S., Strzepek, N., Strzepek, K. and Westphal, M., 2015. The impact of climate change on road and building infrastructure:a four-country study. International Journal of Disaster Resilience in the Built Environment, 6 (4), pp. 382-396.

Chinthala, S., Gulia, S., Stratbuecker, S., Ferreira Pinto Da Silva, C., Rana, C., Mower, K., Dengel, A. and Khare, M., 2016. Eco-friendly Sustainable Building Construction Materials: Simulation of Adsorption and Desorption for MDF-Part 2. In: Indoor Air 2016, 2016-07-03.

Chirivi, S., Ibell, T., Contento, A. and Di Egidio, A., 2016. Linear static behavior of curved beams coupled with strings representing also fiber-reinforced masonry arches. Advances in Structural Engineering, 19 (1), pp. 53-64.

Choi, M. C., Gale, L. and Ibell, T., 2001. The design of anchorage zones containing FRP reinforcement. In: 5th International Conference on The Use of FRPs in Reinforced Concrete Structures, 2001-01-01.

Choi, M. C. and Ibell, T., 2002. Anchorage zones for FRP-prestressed concrete structures. The Structural Engineer, 80 (20), p. 17.

Choi, M. C. and Ibell, T., 2000. Anchorage zones for FRP-prestressed concrete. In: 3rd International Conference on Advanced Composite Materials in Bridges and Structures, 2000-08-01.

Chouchoulas, O. and Day, A., 2007. Design exploration using a shape grammar with a genetic algorithm. Open House International, 32 (2), pp. 26-35.

Ciancio, D., Jacquin, P. and Walker, P., 2013. Advances on the assessment of soil suitability for rammed earth. Construction and Building Materials,, 42, pp. 40-47.

Clark, D. and Walker, P., 2003. The properties of a soil from Southwest England and its influence on the behaviour of rammed earth. In: 9th International Conference on the study and conservation of earthen architecture, 2003-01-01.

Clark, R. A. and Ansell, M. P., 1986. Jute and Glass-Fiber Hybrid Laminates. Journal of Materials Science, 21 (1), pp. 269-276.

Claxton, M., Hart, R. A., McCombie, P. F. and Walker, P., 2005. Rigid block distinct element modeling of dry-stone retaining walls in plane-strain. Journal of Geotechnical and Geoenvironmental Engineering, 131 (3), pp. 381-389.

Codinhoto, R., Tzortzopoulos, P. and Kagioglou, M., 2007. Effects of the built environment on health outcomes: Challenges in building the evidence-base. In: 4th International SCRI Symposium, 2007-03-26 - 2007-03-27.

Codinhoto, R., 2016. Design in Acute Health: Healing Architecture. In: Cooper, R. and Tsekleves, E., eds. Design for Healthcare. Gower. (Design for Social Responsibility)

Codinhoto, R., Aouad, G., Kagioglou, M., Tzortzopoulos, P. and Cooper, R., 2009. Evidence-based design of health care facilities. Journal of Health Services Research and Policy, 14 (4), pp. 194-196.

Codinhoto, R., Boyko, C., Cooper, R., Tzortzopoulos, P. and Kagioglou, M., 2009. The Physical Environment and Wellbeing: Looking Ahead. In: International Built & Human Environment Research Week 2009, 2009-01-29 - 2009-01-30.

Codinhoto, R. and Formoso, C. T., 2005. Contributions for the integration of design and production management in construction. In: International Conference on Design Management in the Architectural and Engineering Office, 2005-11-02 - 2005-11-04.

Codinhoto, R. and Formoso, C. T., 2007. Estudo sobre o planejamento integrado dos processos de projeto e produção em empreendimento da construção. In: Workshop Nacional Gestão do Processo de Processo na Construção de Edifícios, 2007-12-06 - 2007-12-07, UFPR.

Codinhoto, R. and Kiviniemi, A., 2014. BIM for FM: a case support for business life cycle. In: Product Lifecycle Management for a Global Market. Springer, pp. 63-74.

Codinhoto, R., Kiviniemi, A., Kemmer, S. and Gravina da Rocha, C., 2013. BIM-FM implementation:An exploratory investigation. International Journal of 3D Information Modeling, 2 (2), pp. 1-15.

Codinhoto, R., Koskela, L., Tzortzopoulos, P. and Kagioglou, M., 2006. How analysis and synthesis have been understood in design. In: 14th Annual Conference on Lean Construction, 2006-07-25 - 2006-07-27.

Codinhoto, R., Koskela, L., Tzortzopoulos, P. and Kagioglou, M., 2007. The method of analysis in production management. In: 15th Annual Conference of the International Group for Lean Construction, 2007-07-18 - 2007-07-20.

Codinhoto, R., Platten, B., Tzortzopoulos, P. and Kagioglou, M., 2010. Supporting Evidence-Based Design. In: Kagioglou, M. and Tzortzopoulos, P., eds. Improving Healthcare through Built Environment Infrastructure. Blackwell Publishing, pp. 151-165.

Codinhoto, R., Tzortzopoulos, P., Kagioglou, M., Aouad, G. and Cooper, R., 2008. The effects of the built environment on health outcomes. University of Salford.

Codinhoto, R., Tzortzopoulos, P., Kagioglou, M., Aouad, G. and Cooper, R., 2009. The impacts of the built environment on health outcomes. Facilities, 27 (3/4), pp. 138-151.

Codinhoto, R., Tzortzopoulos, P., Kagioglou, M. and Passman, D., 2010. Evidence-based design'evolving fast'. Health Estate Journal, 64 (3), pp. 29-31.

Codinhoto, R., Tzortzopoulos, P., Rooke, J., Kagioglou, M. and Koskela, L., 2008. Facilitators and barriers to the integration of healthcare service and building design. In: 16th Annual Conference of the International Group for Lean Construction, 2008-07-16 - 2008-07-18.

Coley, D., 2012. Energy efficiency: Alternative routes to mitigation. In: Booth, C., Hammond, F. N., Lamond, J. and Proverbs, D. G., eds. Solutions for Climate Change Challenges in the Built Environment. Chichester: Wiley-Blackwell, pp. 153-162.

Coley, D., Winter, M. and Howard, M., 2011. The question of food miles: Thinking locally. In: Cohen, G. E. and Levin, C. M., eds. Food Storage. Hauppauge, N.Y.: Nova Science.

Coley, D., 2012. Mitigation via renewables. In: Booth, C. A., Hammond, F. N., Lamond, J. E. and Proverbs, D. G., eds. Solutions to Climate Change Challenges in the Built Environment. Oxford, U. K.: Wiley-Blackwell, pp. 303-320.

Coley, D., Winter, M. and Howard, M., 2013. National and international food distribution:do food miles really matter? 499 David Coley, Michael Winter and Mark Howard. In: Tirwari, B. K., Norton, T. and Holden, N. M., eds. Sustainable Food Processing. Chichester, U. K.: Wiley-Blackwell, pp. 499-520.

Coley, D. A., Howard, M. and Winter, M., 2011. Food miles: time for a re-think? British Food Journal, 113 (7), pp. 919-934.

Collery, D., Bjerregaard, M. and Paine, K., 2012. The quality of collapse debris and possible reuse of this material to rebuild Port au Prince Haiti. In: Concrete in the Low Carbon Era, 2012-07-09 - 2012-07-11.

Collery, D. J., McKenna, P., Dunne, D. and Paine, K. A., 2014. Strength and deformation characteristics of concrete containing recycled aggregate fines. In: Civil Engineering Research in Ireland (CERI 2014) conference, 2014-08-28 - 2014-08-29.

Collery, D. J., Paine, K. A. and Dhir, R. K., 2015. Establishing rational use of recycled aggregates in concrete:a performance-related approach. Magazine of Concrete Research, 67 (11), pp. 559-574.

Collier, N. C., Wilson, M. A., Carter, M. A., Hoff, W. D., Hall, C., Ball, R. J., El-Turki, A. and Allen, G. C., 2007. Theoretical development and validation of a Sharp Front model of the dewatering of a slurry by an absorbent substrate. Journal of Physics D: Applied Physics, 40, pp. 4049-4054.

Collins, L., Natarajan, S. and Levermore, G., 2010. Climate change and future energy consumption in UK housing stock. Building Services Engineering Research and Technology, 31 (1), pp. 75-90.

Comartin, C., Brzev, S., Naeim, F., Greene, M., Blondet, M., Cherry, S., D'Ayala, D. F., Farsi, M., Jain, S. K. and Pantelic, J., 2004. A Challenge to Earthquake Engineering Professionals. Earthquake Spectra, 20, 1049--1056.

Cook, D., Ledbetter, S., Ring, S. and Wentzel, F., 2000. Masonry crack damage: its origins, diagnosis, philosophy and a basis for repair. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 140, pp. 39-50.

Cook, D. and McCombie, P., 1999. Superficial Landslipping in the Area of the City of Bath, England, an Approach to Maintenance and Repair. In: 2nd International Conference on Landslides Slope Stability & The Safety of Infra-Structures, 1999-01-01.

Cooke, L., Fodde, E., Sikka, S. and Vargas-Neumann, J., 2012. Documenting earthen archaeological sites - the ISCEAH glossary of deterioration patterns. In: Terra 2012, 11th international conference on the study and conservation of earthen structures, 2012-04-22 - 2012-04-26.

Coonan, R., Darby, A. and Ibell, T., 2009. Effectively confined area for FRP-confined RC columns under eccentric loading. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Copping, A. G., 2002. Chapter 11: Management of Fire Safety. In: Means of Escape from Fire. London, UK: Blackwell Publishing, 247--269.

Copping, A. G., 2004. Introducing a Protocol for an Integrated Fire Safety Evaluation Procedure for Historic Buildings. International Journal of Performance Based Fire Codes, 6, 72--77.

Copping, A., Applegate, R. and Mellett, P., 2011. Towards Enhanced Feedback Practices in a Virtual Environment. In: Blended Learning Conference, 2011-06-15 - 2011-06-16.

Copping, A. and Bhujun, V., 2007. Total Customer Satisfaction: Introducing a Dynamic Measurement Model for Construction Consultants. In: ASCE Construction Research Conference, 2007-05-05 - 2007-05-07.

Copping, A. and Davies, S., 2016. Creativity and the Construction Project Manager:An Exploratory Study. In: CIB World Building Congress 2016, 2016-05-30 - 2016-06-03, Tampere Finland.

Copping, A., Grover, R. and Emmitt, S., 2016. Learning from the Past:A Conceptual Model of Independent Typology Formation in the Design Studio. In: Integrated Design at 50: Building our Future, 2016-06-30 - 2016-07-01, University of Bath.

Copping, A. and Hancock, M., 2014. Delivering Postgraduate Education to Construction Professionals in Tanzania via Distance Learning. In: CIB W55, 2014-05-04 - 2014-05-07, Sri Lanka.

Copping, A. and Mellett, P., 2005. An Innovative Approach to the Teaching of Building Design and Information. In: International Conference on Innovation in Architecture, Engineering and Construction, 2005-06-14 - 2005-06-16.

Copping, A., Morrison, D. and Bloss, E., 2003. Designing a Problem-based Pedagogy for E-learning Delivery: A Case Study Example. In: International Conference on Building Education and Research, 2003-04-08 - 2003-04-10.

Copping, A. and Powell, R., 2014. Screening for Fatigue-related Impairment in the Workplace. In: CIB W99, 2014-06-02 - 2014-06-03, Sweden.

Copping, A. and Rabba, J., 2016. Understanding Informal Communication Networks in Engineering Design Consultancy Decision Making:An Exploratory study. In: Integrated Design at 50: Building our Future, 2016-06-30 - 2016-07-01, University of Bath.

Copping, A., Shepherd, P. and Azzouz, A., 2016. Emergence of Building Information Modelling Assessment Methods. In: Integrated Design at 50: Building our Future, 2016-06-30 - 2016-07-01, University of Bath.

Copping, A., Shepherd, P., Azzouz, A. and Duncan, A., 2016. Application of the ARUP BIM Maturity Measure:An Analysis of Trends and Patterns. In: ARCOM 2016, 2016-09-05 - 2016-09-07, Manchester.

Copping, A. and Smith, G., 2015. Harvesting Knowledge Through Post Project Reviews:A Case Study from the UAE. In: COBRA 2015, 2015-07-08 - 2015-07-10, Australia.

Copping, A. and Turner, K., 2012. Barriers to the Achievement of Best Value Contractor Selection in the UK Public Sector. In: International conference in Construction and Real Estate Management, 2012-10-01 - 2012-10-03.

Costa, S. and Pesce, G. L. A., 2009. 3° workshop:'Open Source Free Software e Open Format nei processi di ricerca archeologica'. Notiziario di Archeologia Medievale, 78, pp. 17-19.

Costa, S. and Pesce, G., 2009. Condivisione e diffusione dei dati nel settore dei Beni Culturali: Le potenzialità dell’integrazione tra standard, formati aperti e licenze libere. In: Cignoni, P., Palombini, A. and Pescarin, S., eds. Atti del IV workshop nazionale Open Source, Free Software e Open Format nei processi di ricerca archeologica, 2009-04-26 - 2009-04-27. Florence: All’Insegna del Giglio.

Costa, S., Pesce, G. and Bianconi, L., 2009. Il progetto IOSA cinque anni dopo: cambiamenti di prospettiva e indirizzi per il futuro. In: Cignoni, P., Palombini, A. and Pescarin, S., eds. Atti del IV workshop nazionale Open Source, Free Software e Open Format nei processi di ricerca archeologica, 2009-04-26 - 2009-04-27. Florence: All’Insegna del Giglio.

Costa, S., Bianconi, L. and Pesce, G. L. A., 2013. Open Source in archaeology:beyond passive users. In: Contreras, F., Farjas, M. and Melero, F. J., eds. CAA2010 Fusion of Cultures. Proceedings of the 38th Annual Conference on Computer Applications and Quantitative Methods in Arhcaeology. Granada, Spain, April 2010. Oxford, U. K.: Archaeopress, pp. 443-448. (British Archaeology Reports (BAR) International Series; 2494)

Cripps, A., Harris, B. and Ibell, T., 2002. Applications for FRP composites in construction.Vol. 645. Unkown Publisher. (CIRIA)

Cruise, R. B., 2005. The Dry Stone Waller. In: Lim, C. J., ed. Devices: A Manual of Architectural + Spatial Machines. Architectural Press, pp. 188-193.

Cruise, R. B., 2007. The methodology of construction: the gentleman's tailor and the home sewer. In: Lloyd Thomas, K., ed. Material Matters: Architecture and Material Practice. London: Routledge, pp. 163-174.

Cruise, R. B. and Ayres, P., 2004. Making a wall: The development of software to simulate the decisions made and physical fabrication of a dry stone wall. In: Gero, J. S., ed. Design Computing and Cognition '04. Dordrecht: Kluwer Academic Publishers, pp. 275-293.

Cruise, R. B. and Gardner, L., 2006. Effects of the production route on the behaviour of stainless steel. The Structural Engineer, 84 (22), 18 and 21-22.

Cruise, R. B. and Gardner, L., 2008. Harnessing strength enhancements due to cold-forming of stainless steel sections. In: Mahendran, M., ed. Proceedings of the Fifth International Conference on Thin-Walled Structures: Recent innovations and developments.Vol. 2. Queensland University of Technology, pp. 915-922.

Cruise, R. B. and Gardner, L., 2006. Life cycle costing and efficiency of metallic structures. In: Dubina, D. and Ungureanu, V., eds. ICMS 2006 - Steel: A new and traditional material for building, 2006-09-20 - 2006-09-22.

Cruise, R. B. and Gardner, L., 2007. Material Stratification in cold-formed stainless steel structural members. In: Beale, R. G., ed. Proceedings of the 6th International Conference on Steel and Aluminium Structures. Oxford: Oxford Brookes University Press, pp. 1050-1057.

Cruise, R. B. and Gardner, L., 2006. Measurement and prediction of geometric imperfections in structural stainless steel members. Structural Engineering and Mechanics, 24 (1), pp. 63-89.

Cruise, R. B. and Gardner, L., 2008. Residual stress analysis of structural stainless steel sections. Journal of Constructional Steel Research, 64 (3), pp. 352-366.

Cruise, R. B. and Gardner, L., 2008. Strength enhancements induced during cold forming of stainless steel sections. Journal of Constructional Steel Research, 64 (11), pp. 1310-1316.

Cruise, R. B. and Gardner, L., 2006. The effect of production route on the behaviour of stainless steel structural members. In: Camotim, D., Silvestre, N. and Dinis, P. B., eds. Proceedings of the International Colloquium on Stability and Ductility of Steel Structures. Lisbon, Portugal:: IST Press, pp. 773-780.

Cruise, R., 2007. The influence of production routes on the behaviour of stainless steel structural. Thesis (Doctor of Philosophy (PhD)). Imperial College, London.

D'Ayala, D., 2003. A summary of the report Seismic vulnerability of historic buildings in Lalitpur, Nepal. Earthquake Hazard Centre Newsletter, 7 (1).

D'Ayala, D., 2004. Correlation of fragility curves for vernacular building types: Houses in Lalitpur, Nepal and in Istanbul, Turkey. In: Proceedings of the 13th World Conference of Earthquake Engineering, 2004-01-01.

D'Ayala, D. and Casapulla, C., 2001. Limit state analysis of hemispherical domes with finite friction. In: Historical Constructions, Possibilities of Numerical and Experimental Techniques, 2001-01-01.

D'Ayala, D. and Charleson, A., 2002. Review of seismic strengthening guidelines for RC Buildings in developing countries. In: 12th European Conference on Earthquake Engineering, 2002-01-01.

D'Ayala, D., Penford, A. and Valentini, S., 2003. Use of FRP fabric for strengthening of Reinforced concrete beam-column joints. In: 10th International conference on Structural faults and Repair, 2003-01-01.

D'Ayala, D. and R, B. S., 2004. Traditional Nawari house in Kathmandu Valley Report 99. In: EERI, World Housing Encyclopedia, http://www.world-housing.net/, 2004-01-01.

D'Ayala, D. and Smars, P., 2003. Architectural and Structural Modelling for the Conservation of Cathedrals. Journal of Architectural Conservation, 9, 51--72.

D'Ayala, D. and Speranza, E., 2001. A procedure for evaluating the seismic vulnerability of historic buildings at Urban scale based on mechanical parameters. In: 2nd International Congress on Studies in Ancient Structures, 2001-01-01.

D'Ayala, D. and Speranza, E., 2002. An integrated procedure for the assessment of seismic vulnerability of historic buildings. In: 12th European Conference on Earthquake Engineering, 2002-01-01.

D'Ayala, D. and Speranza, E., 2003. Definition of Collapse Mechanisms and Seismic Vulnerability of Historic Masonry Buildings. Earthquake Spectra, 19, 479--509.

D'Ayala, D. and Speranza, E., 2001. Seismic vulnerability of historic centres. In: Proceedings of the International Confererence More Than Two Thousand Years in the History of Architecture, Bethlehem, UNESCO, 2001-01-01.

D'Ayala, D. and Speranza, E., 2002. Single-family historic brick masonry house, Report no. 29. In: EERI, World Housing Encyclopedia, http://www.world-housing.net/, 2004-01-01.

D'Ayala, D. and Speranza, E., 2002. Single-family stone masonry house, Report no. 28. In: EERI, World Housing Encyclopedia, http://www.world-housing.net/, 2004-01-01.

D'Ayala, D. F., 2005. Force and Displacement Based Vulnerability Assessment for Traditional Buildings. Bulletin of Earthquake Engineering, 3, 235--265.

D'Ayala, D. F., 2007. Numerical Modelling of masonry structures. In: Forsyth, M., ed. Structures and Construction in Historic Building Conservation. Oxford: Blackwell.

D'Ayala, D. F., 2003. The Kocaeli, Turkey Earthquake of 17 August 1999: a field report by EEFIT. Earthquake Engineering Field Investigation Team, Institution of Structural Engineers.

D'Ayala, D. F. and Copping, A., 2007. Holistic Approach to the Rehabilitation of Foundouks in Morocco. APT Bulletin: The Journal of Perservation Technology, 38.

D'Ayala, D. F., Copping, A. G. and Wang, H., 2006. A conceptual model for Multihazard assessment of the vulnerability of historic buildings. In: Lourenco, P. B., Roca, P., Modena, C. and Agrawal, S., eds. Structural Analysis of Historical Constructions : Possibilities of Numerical and Experimental Techniques. Proceedings of the Fifth International Conference.Vol. 1. New Delhi: Macmillian, pp. 121-140.

D'Ayala, D. F. and Forsyth, M., 2007. What is conservation engineering? In: Forsyth, M., ed. Structures and Construction in Historic Building Conservation. Oxford: Blackwell.

D'Ayala, D. F. and Kansal, A., 2004. Analysis of the seismic Vulnerability of the architectural Heritage in Buhj, Gujarat, India. In: Structural Analysis of Historical Construction, 2004-01-01.

D'Ayala, D. F. and Wang, H., 2006. Conservation practice of chinese timber structures. Journal of Architectural Conservation, 12, p. 7.

D'Ayala, D. F. and Yeomans, D., 2004. Assessing the seismic vulnerability of late Ottoman buildings in Istanbul. In: Structural Analysis of Historical Construction, 2004-01-01.

D'Ayala, D., 1997. Anastylosis of the Western Propileum of the Sanctuary of Arthemis in Jerash. Aspects of structural conservation. In: IABSE International Colloquium on Inspection and Monitoring of the Architectural Heritage, 1997-01-01.

D'Ayala, D., 1999. Correlation of seismic damage between classes of buildings: churches and houses. In: Bernardini, A., ed. Seismic damage to masonry buildings: proceedings of the International Workshop on Measures of Seismic Damage to Masonry Buildings. Taylor & Francis, pp. 41-58.

D'Ayala, D., 2000. Establishing correlation between vulnerability and damage survey for churches. In: 12th World Conference on Earthquake Engineering, 2000-01-01.

D'Ayala, D., 1998. Numerical modelling of masonry structures reinforced or repaired. In: Pande, G. N., Middleton, J. and Kralj, B., eds. Computer methods in structural masonry-4: proceedings of the Fourth International Symposium on Computer Methods in Structural Masonry. London: Taylor & Francis, pp. 161-168.

D'Ayala, D., 2008. Seismic vulnerability and risk assessment of cultural heritage buildings in Istanbul, Turkey. In: 14th World Conference of Earthquake Engineering, 2008-10-12 - 2008-10-17.

D'Ayala, D., 1998. The use of bed joint reinforcement to improve the performance of historic masonry buildings. In: Proceedings of 5th International Masonry Conference, 1998-01-01.

D'Ayala, D. and Ansal, A., 2012. Non linear push over assessment of heritage buildings in Istanbul to define seismic risk. Bulletin of Earthquake Engineering, 10 (1), pp. 285-306.

D'Ayala, D. and Ansal, A., 2009. Non-linear Push Over Assessment of Historic Buildings in Istanbul to Define Vulnerability Functions. In: WCCE – ECCE – TCCE Joint Conference: Earthquake and Tsunami, 2009-06-22 - 2009-06-24.

D'Ayala, D., Baratta, A., Spence, R. and Zuccaro, G., 1997. Earthquake Protection for Historic Town Centres, The TOSQA Project and Further Development. In: Proceedings of Second Egyptian Conference on Earthquake Engineering - EGYQUAKE 2, 1997-01-01.

D'Ayala, D. and Dolce, M., 2011. L'Aquila earthquake: Seismic sequence of 6th April 2009, Abruzzo, Italy. Bulletin of Earthquake Engineering, 9 (1), pp. 1-10.

D'Ayala, D., Jaiswal, K., Wald, D. J., Porter, K. and Greene, M., 2010. Collaborative effort to estimate collapse fragility for buildings worldwide: The WHE-PAGER project. In: 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders, 2010-07-25 - 2010-07-29.

D'Ayala, D., Paganoni, S. and James, P., 2010. Experimental validation of dissipative anchor devices for the seismic protection of heritage buildings. In: 13th International Conference on Structural Faults & Repair, 2010-06-15 - 2010-06-17.

D'Ayala, D., Shi, Y. and Stammers, C. W., 2008. Dynamic multibody behaviour of Historic masonry building models. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom.Vol. 1. London: Taylor & Francis, pp. 489-496.

D'Ayala, D. and Shi, Y. N., 2011. Modeling masonry historic buildings by multi-body dynamics. International Journal of Architectural Heritage, 5 (4-5), pp. 483-512.

D'Ayala, D., Spence, R., Oliveira, C. and Pomonis, A., 1997. Earthquake Loss Estimation for Europe's Historic Town Centres. Earthquake Spectra, 13 (4), pp. 773-793.

D'Ayala, D., Spence, R., Oliveira, C. and Silva, P., 1996. Vulnerability of buildings in historic town centres: a limit-state approach. In: X1 World Conference on Earthquake Engineering, 1996-01-01.

D'Ayala, D. and Speranza, E., 1999. Identificazione dei meccanismi di collasso per la stima della vulnerabilita' sismica di edifici in centri storici. In: Atti del IX Convegno Nazionale L'Ingegneria Sismica in Italia, 1999-09-01.

D'Ayala, D. and Tomasoni, E., 2008. Structural Behaviour of Masonry Vaults: Limit State Analysis with Finite Friction. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom.Vol. 1. London: Taylor & Francis, pp. 47-61.

D'Ayala, D. and Tsai, P., 2008. Evaluation of Historic Dieh-Dou Buildings in Taiwan. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom.Vol. 1. London: Taylor & Francis, pp. 331-338.

D'Ayala, D. and Tsai, P., 2008. Seismic assessment of historic timber structures in Taiwan. In: 14th World Conference of Earthquake Engineering, 2008-10-12 - 2008-10-17.

D'Ayala, D., Worth, J. and Riddle, O., 2009. Realistic shear capacity assessment of infill frames: Comparison of two numerical procedures. Engineering Structures, 31 (8), pp. 1745-1761.

D'Ayala, D. F. and Paganoni, S., 2011. Assessment and analysis of damage in L'Aquila historic city centre after 6th April 2009. Bulletin of Earthquake Engineering, 9 (1), pp. 81-104.

D'Ayala, D. F. and Tomasoni, E., 2011. Three-dimensional analysis of masonry vaults using limit state analysis with finite friction. International Journal of Architectural Heritage, 5 (2), pp. 140-171.

D'Ayala, D. F. and Tsai, P. H., 2008. Seismic Vulnerability of Dieh-Dou Timber structures in Taiwan. Engineering Structures, 30 (8), pp. 2101-2113.

Dale, A., Eccleston, P., Hankin, B., Hunter, N., Lamb, R., Waller, S., Kjeldsen, T. R., Packman, J., Stewart, L., Margetts, J., Dawson, R., Hall, J. and Kilsby, C., 2010. Developing the next generation of surface water flood risk assessment, Phase I:Final Research Report to the Environment Agency, R & D Report SC070059/TR. Environment Agency.

Dale, A. W., Sommer, S., Lomnitz, U., Montes, I., Treude, T., Liebetrau, V., Gier, J., Hensen, C., Dengler, M., Stolpovsky, K., Bryant, L. D. and Wallmann, K., 2015. Organic carbon production, mineralisation and preservation on the Peruvian margin. Biogeosciences, 12 (5), pp. 1537-1559.

Dalziel, S. B., Patterson, M., Caulfield, C. P. and Le Brun, S., 2011. Lee waves: new understanding of a classical problem. In: 7th International Symposium on Stratified Flows, 2011-08-22 - 2011-08-26.

Dalziel, S. B., Patterson, M., Caulfield, C. P. and Le Brun, S., 2010. Lee waves: new understanding of a classical problem. In: 2nd Norway-Scotland Internal Waves Symposium, 2010-11-01 - 2010-11-02.

Dalziel, S. B., Patterson, M. D., Caulfield, C. P. and Coomaraswamy, I. A., 2008. Mixing efficiency in high-aspect-ratio Rayleigh-Taylor experiments. Physics of Fluids, 20, 065106.

Dalziel, S. B., Patterson, M. D., Caulfield, C. P. and Le Brun, S., 2011. Lee waves:new understanding of a classical problem. In: Cenedese, A., Espa, S. and Purini, R., eds. Proceedings of VII International Symposium on Stratified Flows, 2011. , p. 1162.

Dalziel, S. B., Patterson, M. D., Caulfield, C. P. and Le Brun, S., 2011. The structure of low Froude number lee waves over an isolated obstacle. Journal of Fluid Mechanics, 689, pp. 3-31.

Dammerud, J. J., Barron, M. F. and Kahle, E., 2011. Objective assessment of acoustic conditions for symphony orchestras. Building Acoustics, 18 (3-4), pp. 207-219.

Dammerud, J. J. and Barron, M., 2007. Early subjective and objective studies of concert hall stage conditions for orchestra performance. In: 19th International Congress on Acoustics, 2007-09-01.

Dammerud, J. J. and Barron, M., 2010. Attenuation of direct sound and the contributions of early reflections within symphony orchestras. The Journal of the Acoustical Society of America, 128 (4), pp. 1755-1765.

Dammerud, J. J. and Barron, M., 2008. Concert hall stage acoustics from the perspective of performers and physical reality. Proceedings of the Institute of Acoustics, 30 (3), pp. 26-36.

Dammerud, J. J., Barron, M. and Kahle, E., 2010. Objective assessment of acoustic conditions on concert hall stages – Limitations and new strategies. In: International Symposium on Room Acoustics, 2010-08-29 - 2010-08-31.

Dammerud, J. J., 2009. Stage Acoustics for Symphony Orchestras in Concert Halls. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Darby, A. and Ibell, T., 2007. A novel approach to the anchorage of FRP reinforcing bars in concrete. In: Proceedings of Fibre-Reinforced Polymers for RC Structures (FRPRCS-8), 2007-07-01.

Darby, A., Ibell, T. and Denton, S., 2007. Gaps in current knowledge for FRP strengthening of RC structures. In: Proceedings of Advanced Composites in Construction ACIC07, 2007-01-01.

Darby, A. P., Blakeborough, A. and Williams, M. S., 2001. Improved control algorithm for real-time substructure testing. Earthquake Engineering & Structural Dynamics, 30, p. 446.

Darby, A. P. and Ibell, T. J., 2007. Advanced Composites in Construction ACIC07. In: Advanced Composites in Construction ACIC07, 2007-04-01.

Darby, A. P., Ibell, T. J. and Denton, S. R., 2005. Loading effects in FRP-strengthened concrete bridge decks. In: Proceedings of ConMat'05, 2005-01-01.

Darby, A. P., Ibell, T. J. and Denton, S. R., 2008. Strengthening of structures with changes in section properties using externally bonded FRP. In: ACMBS V, Advanced Composites Materials in Bridges and Structures, 2008-09-22 - 2008-09-24.

Darby, A. P. and Pellegrino, S., 1999. Modeling and control of a flexible structure incorporating inertial slip-stick actuators. Journal of Guidance, Control, and Dynamics, 22 (1), pp. 36-42.

Darby, A. P., Williams, M. S. and Blakeborough, A., 2002. Stability and delay compensation for real-time substructure testing. Journal of Engineering Mechanics, 128, 1276--1284.

Darby, A. P. and Pellegrino, S., 1997. Inertial stick-slip actuator for active control of shape and vibration. Journal of Intelligent Material Systems and Structures, 8 (12), pp. 1001-1011.

Darby, A., Ibell, T. J., Tallis, S. and Winkle, C., 2007. End Anchorage technique for internal FRP reinforcement. In: Proceedings of Fibre-Reinforced Polymers for RC Structures (FRPRCS-8), 2007-07-01.

Darby, A., Ibell, T., Clarke, J., Denton, S., Farmer, N. and Luke, S., 2004. Strengthening concrete structures using fibre composites. Proceedings of the Institution of Civil Engineers - Bridge Engineering, 157 (3), pp. 123-129.

Darby, A. P., Denton, S. R. and Ibell, T. J., 2009. Influence of changes in cross section on the effectiveness of externally bonded FRP strengthening. Journal of Composites for Construction, 13 (3), pp. 208-216.

Darby, A., Blakeborough, A. and Williams, M. S., 1999. Real-time substructure tests using hydraulic actuator. Journal of Engineering Mechanics, 125 (10), pp. 1133-1139.

Darby, A., Coonan, R., Ibell, T. and Evernden, M., 2011. FRP confined square and rectangular columns under concentric and eccentric loading. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Darby, A. and Pellegrino, S., 1997. Active alignment control of a payload using non-linear, long stroke actuators. In: IUTAM Symposium on Interaction Between Dynamics and Control in Advanced Mechanical Systems, 1996-04-21 - 1996-04-26.

Darby, A., Williams, D., Williams, M. and Smelt, C., 1998. Computer Simulation of a Real-Time Dynamic Testing System for Structures. In: 11th European Conference on Earthquake Engineering, 1998-01-01.

Davies, P. J., Emmitt, S. and Firth, S. K., 2014. Challenges for capturing and assessing initial embodied energy:a contractor’s perspective. Construction Management and Economics, 32 (3), pp. 290-308.

Davies, P. J., Emmitt, S. and Firth, S. K., 2015. Delivering improved initial embodied energy efficiency during construction. Sustainable Cities and Society, 14, pp. 267-279.

Davies, P. J., Emmitt, S. and Firth, S. K., 2013. On-site energy management challenges and opportunities:a contractor's perspective. Building Research and Information, 41 (4), pp. 450-468.

Davies, P. J., Emmitt, S., Firth, S. K. and Kerr, D., 2013. Addressing embodied energy from a contractor's perspective. Coventry, U. K.: Coventry University.

Dawson, A.R., Dehdezi, P.K., Hall, M.R., Wang, J. and Isola, R., 2012. Enhancing thermal properties of asphalt materials for heat storage and transfer applications. Road Materials and Pavement Design, 13 (4), pp. 784-803.

Day, A., 2005. A digital model of a heritage city: the Bath Experience. In: Insights of Digital Cities. Taipei: Archidata, pp. 57-74.

Day, A., 1997. Digital Building. Butterworth-Heinemann.

Day, A., 2002. Urban visualization and public inquiries: the case of the Heron Tower, London. Architectural Research Quarterly, 6 (4), pp. 363-372.

Day, A. and Ab Rahman, R., 2006. Physical or digital: alternative approaches to modelling in a participatory design environment. International Journal of Architectural Computing, 4 (4), pp. 57-70.

Day, A., Bourdakis, V. and Robson, J., 1996. Living with a virtual city. Architectural Research Quarterly, 2 (Autumn), pp. 84-91.

Day, A. and Gorst, T., 2000. Using Computers to Enhance Public Participation in Urban Design. In: Digital Environments: Design, Heritage and Architecture.Vol. 2. London: Computers and the History of Art.

Day, A. and Hart, V., 2007. The architectural guidebook:from Palladio to Pod. Architectural Research Quarterly, 11 (2), pp. 151-158.

Day, A. and Radford, A., 1998. An overview of city simulation. In: 3rd Conference on Computer Aided Architectural Design, 1998-01-01.

Day, T., Pritchard, J. and Heath, A., 2010. Sowing the seeds of enhanced academic writing support in a research-intensive university. Educational Developments, 11 (3), pp. 18-21.

De Caso y Basalo, F.J., Nanni, A. and Ibell, T., 2011. ICE methodology for FRP characterisation. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

De Wilde, P. and Coley, D., 2012. Editorial article: The Implications of a Changing Climate for Buildings. Building and Environment, 56, pp. 1-7.

Dearden, R., Kjeldsen, T. R., Lawley, R., Miller, J., Packman, J. and Rawlins, B., 2012. Infiltration and Storm Runoff Pathfinder Project:Interim report 2011-2012. IR/12/044. British Geological Survey.

Dell, R. W., Patterson, M. D., Caulfield, C. P. and Dalziel, S. B., 2006. Internal gravity wave generation by isolated topography in the laboratory: Limitations of linear theory. In: 59th Annual Meeting of the APS Division of Fluid Dynamics, 2006-11-19 - 2006-11-21.

Dell, R. W., Patterson, M. D., Caulfield, C. P. and Dalziel, S. B., 2007. Internal gravity waves generation by isolated topography in the laboratory: Lee waves and lee mountains. In: European Geosciences Union General Assembly, 2007-04-15 - 2007-04-20.

Denton, S. R., Ibell, T. and Posner, C., 2000. Full-scale model testing to investigate the shear capacity of concrete bridges with inadequately-anchored reinforcement. In: 4th International Bridge Management Conference, 2000-04-01.

Dhir, R. K., Dyer, T. D. and Paine, K. A., 2006. Appropriate use of sustainable construction materials. Concrete, 40 (9), pp. 20-23.

Dhir, R. K., Dyer, T. D. and Paine, K. A., 2004. Dismantling barriers: Roles for research in realising markets for construction and demolition wastes. In: 1st International Conference on Sustainable Construction: Waste Management, 2004-06-10 - 2004-06-12.

Dhir, R. K., McCarthy, M. J. and Paine, K. A., 2005. Engineering property and structural design relationships for new and developing concretes. Materials and Structures, 38 (1), pp. 1-9.

Dhir, R. K., McCarthy, M. J. and Paine, K. A., 2002. Use of fly ash to BS EN 450 in structural concrete. Technology Digest 1. The Concrete Society. (Technology Digest TD1)

Dhir, R. K., Newlands, M. D., McCarthy, M. J. and Paine, K. A., 2008. Harnessing fibres for concrete construction. IHS BRE Press.

Dhir, R. K., Paine, K. A., McCarthy, M. J., Somerville, G. and Desai, S. B., 2000. Study of engineering properties and performance of concrete mixes designed for sustainable construction. Final Report to Department of Trade and Industry, CI/33/4/43. Unkown Publisher. (CI/33/4/43)

Dhir, R. K. and Paine, K. A., 2007. Performance related approach to use of recycled aggregates. WRAP Final Report. Waste and Resources Action Programme.

Dhir, R. K. and Paine, K. A., 2004. Suitability and practicality of using coarse RCA in normal and high-strength concrete. In: 1st International Conference on Sustainable Construction: Waste Management, 2004-06-10 - 2004-06-12.

Dhir, R. K., Paine, K. A. and Dyer, T. D., 2004. Recycling and reconstitution of construction and demolition waste. In: International Conference on Sustainable Waste Management and Recycling, 2004-09-01.

Dhir, R. K., Paine, K. A. and Dyer, T. D., 2004. Recycling construction and demolition wastes in concrete. Concrete, 38 (3), pp. 25-28.

Dhir, R. K., Paine, K. A., Dyer, T. D. and Tang, M. C., 2004. Value-added recycling of domestic, industrial and construction arisings as concrete aggregate. Concrete Engineering International, 8 (1), pp. 43-48.

Dhir, R. K., Paine, K. A. and Moroney, R. C., 2003. Recycling of used tyres in concrete. Concrete, 37 (9), pp. 47-48.

Dhir, R. K., Paine, K. A. and O'Leary, S., 2003. Use of recycled concrete aggregate in concrete pavement construction: A case study. In: International Symposium on Sustainable Waste Management, 2003-09-01.

Dhir, R. K., Zheng, L. and Paine, K. A., 2008. Measurement of early-age temperature rises in concrete made with blended cements. Magazine of Concrete Research, 60 (2), pp. 109-118.

Dhir, R. K. and Paine, K. A., 2010. Value added sustainable use of recycled and secondary aggregates in concrete. Indian Concrete Journal, 84 (3), pp. 7-26.

Dhir, R. K., Paine, K. A., de Brito, J. M. C. L., Etxeberria, M., Ho, N. Y., Poon, C. S. and Tam, V. W. Y., 2011. Use of recycled and secondary aggregates in concrete: an overview. In: Dhir, R. K. and Newlands, M. D., eds. New Developments in Concrete Construction. Mumbai: Shroff Publishers and Distributors, pp. 157-182.

Di Murro, V., Pelecanos, L., Soga, K., Kechavarzi, C., Morton, R. F. and Scibile, L., 2016. Distributed fibre optic long-term monitoring of concrete-lined tunnel section TT10 at CERN.

Dickens, J. and Walker, P. J., 1996. Use of distinct element model to simulate behaviour of dry-stone walls. Structural Engineering Review, 8 (2/3), pp. 187-199.

Dickson, M. and Harris, R., 2008. Timber engineered for C21 Architecture. In: ASCE/SEI Structures Congress 2008, 2008-04-01.

Dimitriadou, E. and Shea, A., 2012. Experimental Assessment and Thermal Characterization of ETFE Foil. In: ATINER's Conference Paper Series. Athens Institute for Education and Research. (ATINER CONFERENCE PAPER SERIES; CON2012-0145)

Dimoudi, A. and Nikolopoulou, M., 2003. Vegetation in the Urban Environment: Microclimatic Analysis and Benefits. Energy and Buildings, 35 (1), pp. 69-76.

Dimoudi, A., Nikolopoulou, M. and Steemers, K., 2001. Estimation of the potential for the integration of RES in cities. In: 2nd National Conference RENES Unit, 2001-03-01.

Dong, H., Barr, G., Blackburn, E., Grant, M., Piwek, P., Shepherd, P. and Collins, N., 2010. Inclusive data visualisation: a multidisciplinary approach. In: 3rd International Conference for Universal Design, 2010-10-30 - 2010-11-03.

Donohue, S., Flynn, R., McCarthy, V., Orr, A., Rafferty, P. and Galvin, K., 2010. Geophysical assessment of contamination from a wastewater treatment system in the Milltown lake catchment, Ireland. In: EAGE Near Surface 2010, 16th Annual Meeting of Environmental and Engineering Geophysics, 2010-09-01.

Donohue, S., Gavin, K., Long, M., Tolooiyan, A. and Trafford, A., 2011. Understanding Irish landslides using geophysics. In: Geophysical Association of Ireland Seminar on Engineering Geophysics, 2011-02-01.

Donohue, S., Gavin, K. and Tolooiyan, A., 2011. Geophysical and geotechnical assessment of a railway embankment failure. Near Surface Geophysics, 9 (1), pp. 33-44.

Donohue, S. and Long, M., 2008. Assessment of an MASW approach incorporating discrete particle modeling. Journal of Environmental and Engineering Geophysics, 13 (2), pp. 57-68.

Donohue, S. and Long, M., 2010. Assessment of sample quality in soft clay using shear wave velocity and suction measurements. Geotechnique, 60 (11), pp. 883-889.

Donohue, S. and Long, M., 2008. Ground improvement assessment of glacial till using shear wave velocity. In: International Site Characterisation 3 (ISC 3) conference, 2008-04-01 - 2008-04-04.

Donohue, S. and Long, M., 2008. Rapid assessment of offshore and onshore sample quality. In: 15th Nordic Geotechnical Meeting, 2008-09-04 - 2008-09-06.

Donohue, S. and Long, M., 2007. Rapid determination of soil sample quality using shear wave velocity and suction measurements. In: 6th International Off-shore Site Investigation and Geotechnics Conference : Confronting New Challenges and Sharing Knowledge, 2007-09-11 - 2007-09-13.

Donohue, S. and Long, M., 2009. Suction measurements as indicators of sample quality in soft clay. Geotechnical Testing Journal, 32 (3), pp. 286-296.

Donohue, S., Long, M., Gavin, K. and O'Connor, P., 2004. The use of multichannel analysis of surface waves in determining Gmax for soft clay. In: VianaDaFonsea, A. and Mayne, P. W., eds. Geotechnical and Geophysical Site Characterization Vols 1 and 2. Rotterdam, Netherlands: Millpress Science Publishers, pp. 459-466.

Donohue, S., Long, M., O Connor, P., Helle, P., Pfaffhuber, A. and Romoen, M., 2009. Geophysical mapping of quick clay: a case study from Smorgrav, Norway. In: EAGE Near Surface 2009, 15th Annual Meeting of Environmental and Engineering Geophysics, 2009-09-07 - 2009-09-09.

Donohue, S., Long, M. and O'Connor, P., 2007. The application of shear wave velocity to soft ground site investigation in Ireland. In: Soft Ground Engineering (SGE) Conference, 2007-01-01.

Donohue, S., Long, M., O'Connor, P., Helle, T. E., Pfaffhuber, A. A. and Romoen, M., 2012. Multi-method geophysical mapping of quick clay. Near Surface Geophysics, 10 (3), pp. 207-219.

Donohue, S., O'Sullivan, C. and Long, M., 2009. Particle breakage during cyclic triaxial loading of a carbonate sand. Geotechnique, 59 (5), pp. 477-482.

Du, J., 2013. A preliminary view on energy and environmental performances of the window system in houses. In: Household´s energy consumption at the Pufendorf Institute for Advanced Studies, 2013-01-14 - 2013-01-14, Lund University.

Du, J., 2013. Daylight availability, building orientations and ground factors in urban areas: a case in Sweden. In: IBPSA-Nordic seminar, 2013-09-20 - 2013-09-20, Lund University.

Du, J., 2009. Dynamic analysis for daylight availability in high-density urban area. In: The 9th UK CARE Annual General Meeting, 2009-07-09 - 2009-07-09, Salford University.

Du, J., 2014. Window systems and energy performance in one-family houses:size and shading effects. In: Malki-Epsthein, L., Spataru, C., Halburd, L. and Mumovic, D., eds. Proceedings of Building Simulation and Optimization, 2014. London, U. K.: The Bartlett, UCL Faculty of the Built Environment, pp. 209-216.

Du, J. and Lu, M., 2010. Dynamic analysis for daylight availability in high-density residential area of north-east China. In: UK-Ireland Planning Research Conference 2010, 2010-04-07 - 2010-04-09, Anglia Ruskin University.

Du, J. and Sharples, S., 2012. The assessment of vertical daylight factors across the walls of atrium buildings, Part 1:Square atria. Lighting Research and Technology, 44 (2), pp. 109-123.

Du, J., 2013. Advanced daylight systems and lighting performance in office building:a case in high latitudes. In: The 12th European Lighting Conference LuxEuropa2013, 2013-09-17 - 2013-09-19. Poland: Jagiellonian University, pp. 271-276.

Du, J., Hellström, B. and Dubois, M., 2013. A preliminary study of lighting energy performance in houses with various window systems. In: The 7th International Conference on Energy Efficiency in Domestic Appliances and Lighting (EEDAL) 2013, 2013-09-11 - 2013-09-13. Brussels, Belgium: Joint Research Centre, European Commission, pp. 1-11.

Du, J., Hellström, B. and Dubois, M., 2013. Assessing the impact of window systems on energy performance in houses:an integrated analysis. In: 12th European Lighting Conference LuxEuropa2013, 2013-09-17 - 2013-09-19. Poland: Jagiellonian University, pp. 259-264.

Du, J. and Sharples, S., 2010. An analysis of vertical daylight level distributions across the walls of atria. In: CIE 2010, 2010-03-14 - 2010-03-17, Hilton Vienna. Vienna, Austria: CIE Central Bureau, pp. 646-652.

Du, J. and Sharples, S., 2010. Atrium daylighting:daylight levels on the wall and daylight levels in the adjoining spaces. In: CIE2010, 2010-03-14 - 2010-03-17. Vienna, Austria: CIE Central Bureau, pp. 653-660.

Du, J. and Sharples, S., 2009. Computational simulations for predicting vertical daylight levels in atrium buildings. In: The 11th International Building Performance Simulation Association (IBPSA) Conference, 2009, 2009-07-27 - 2009-07-30. Strathclyde, U. K.: University of Strathclyde, pp. 272-279.

Du, J. and Sharples, S., 2010. Daylight in atrium buildings:Geometric shape and vertical sky components. Lighting Research and Technology, 42 (4), pp. 385-397.

Du, J. and Sharples, S., 2012. The assessment of vertical daylight factors across the walls of atrium buildings, Part 2:Rectangular atria. Lighting Research and Technology, 44 (2), pp. 124-138.

Du, J. and Sharples, S., 2011. Daylight performance assessment and design strategies in the adjoining spaces of atrium buildings. In: Bodart, M. and Evrard, A., eds. PLEA 2011 - 27th Conference on Passive and Low Energy Architecture, 2011-07-13 - 2011-07-15. Louvain, Belgium: Universitaires de Louvain, pp. 765-770.

Du, J. and Sharples, S., 2009. Daylight prediction in atrium buildings:measurement, theoretical analysis and simulation. In: 26th International Conference on Passive and Low Energy Architecture, 2009-06-22 - 2009-06-24. Quebec, Canada: Les Presses de l'Universite Laval, pp. 436-441.

Du, J., Sharples, S. and Johnson, N., 2011. A model study of the daylight and energy performance of rooms adjoining an atrium well. In: Moshfegh, B., ed. World Renewable Energy Congress 2011, 2011-05-08 - 2011-05-13. Linkoping, Sweden: Linkoping University, pp. 1906-1913.

Du, J. and Zhang, X., 2015. Forthcoming. Light trespass protection in a glazed office building: how the shading system works? In: Proceedings of The 11th International Building Performance Simulation Association (IBPSA) Conference (Building Simulation 2015). .

Du, J. and Zhang, X., 2014. The Impact of Overhang on the Risk of Light Trespass in a Fully Glazed Office Building. In: 1st International Conference on Sustainable Lighting and Light Pollution. , pp. 51-58.

Du, Q., Yang, R. and Ledbetter, S., 2012. The information sources in building cladding supply chain. Research Journal of Applied Sciences, Engineering and Technology, 4 (21), pp. 4449-4452.

Du, Q., 2009. Integrated decision-making in the cladding supply chain. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Du, Q., Ledbetter, S. and Yang, R., 2012. Web-based information system for cladding industry. In: Frontiers of Manufacturing and Design Science II.Vol. 121-126. Trans Tech Publications, pp. 4265-4268. (Applied Mechanics and Materials)

Du, Q., Yang, J. and Ledbetter, S., 2011. Communication in the cladding supply chain. Advanced Materials Research, 255-260, pp. 3898-3902.

Dubois, M. and Du, J., 2012. Landscape offices at high latitude:daylight autonomy and electric lighting savings in relation to key design features. In: Improving Energy Efficiency in Commercial Building Conference (IEECB’ 12), 2012-04-18 - 2012-04-19. Brussels, Belgium: Joint Research Centre, European Commission, pp. 358-369.

Eames, M., Kershaw, T. J. and Coley, D., 2011. On the creation of future probabilistic design weather years from UKCP09. Building Services Engineering Research and Technology, 32 (2), pp. 127-142.

Eames, M., Kershaw, T. J. and Coley, D., 2011. The creation of wind speed and direction data for the use in probabilistic future weather files. Building Services Engineering Research and Technology, 32 (2), pp. 143-158.

Eames, M., Kershaw, T. J. and Coley, D., 2012. The appropriate spatial resolution of future weather files for building simulation. Journal of Building Performance Simulation, 5 (6), pp. 347-358.

Eames, M. E., Ramallo Gonzalez, A. P. and Wood, M. J., 2016. An update of the UK’s test reference year:the implications of a revised climate on building design. Building Services Engineering Research and Technology, 37 (3), pp. 316-333.

Eatock Taylor, R., Zang, J., Bai, W. and Walker, D. A. G., 2006. Transients in wave diffraction by cylinders and cylinder arrays. In: 21th International Workshop on Water Wave and Floating Bodies (21th IWWWFB), 2006-01-01.

Eatock Taylor, R., Sun, L. and Taylor, P. H., 2008. Gap resonances in focused wave groups. In: 23rd International Workshop on Water Waves and Floating Bodies, 2008-04-13 - 2008-04-16.

Edwards, D. D., Allen, G. C., Ball, R. J. and El-Turki, A., 2007. Pozzolanic properties of glass fines in lime mortars. Advances in Applied Ceramics, 106 (6), pp. 309-313.

Edwards, D. D., Ball, R. J., Winter, R., El-Turki, A. and Allen, G. C., 2006. Pozzolanic properties of glass fines in lime mortars. In: 26th Cement & Concrete Science, 2006-09-11 - 2006-09-12.

Egbu, C. C., Gorse, C. and Emmitt, S., 2000. Knowledge management for sustainable construction in SME's. In: Sustainable Product Information, Proceedings of UICB/W102, 2000. .

El Reifi, M. H. and Emmitt, S., 2011. Lean design management:exploring perceptions and practice. In: Otter, A., , S. E. and Achammer, C., eds. Architectural Management in the Digital Arena, Proceedings of CIB W096, 2011. Eindhoven, The Netherlands: Eindhoven University Press, p. 1105.

El Reifi, M., Emmitt, S. and Ruikar, K., 2014. Exploring the lean briefing process for effective design management. In: International Group for Lean Construction 22. Annual conference., 2014-06-23 - 2014-06-24, Soria Moria Hotell.

El-Turki, A., Ball, R. J. and Allen, G. C., 2005. Carbonation of Natural Hydraulic Lime (NHL) 3.5. In: Cement Combinations for Durable Concrete, 2005-07-05 - 2005-07-07.

El-Turki, A., Ball, R. J. and Allen, G. C., 2006. Chemical and mechanical properties of lime-based mortar materials. Journal of the Building Limes Forum, 13, pp. 71-87.

El-Turki, A., Ball, R. J. and Allen, G. C., 2006. Simulated aging of lime mortars - A mechanical property, structural and compositional study. In: International Conference on Heritage, Weathering and Conservation (HWC-2006), 2006-06-21 - 2006-06-24.

El-Turki, A., Ball, R. J. and Allen, G. C., 2009. The effect of carbonation on the mechanical and microstructural properties of lime and cement mortars. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

El-Turki, A., Ball, R. J. and Allen, G. C., 2007. The influence of relative humidity on structural and chemical changes during carbonation of hydraulic lime. Cement and Concrete Research, 37 (8), pp. 1233-1240.

El-Turki, A., Ball, R. J., Wang, C. F. and Allen, G. C., 2005. A study of novel lime based mortars consisting of lime, oyster shell lime, clay, sugar, sand and rice using Focused Ion Beam microscopy, Raman spectroscopy and mechanical testing. In: 10th Euroseminar on Microscopy Applied to Building Materials, 2005-06-21 - 2005-06-25.

El-Turki, A., Ball, R. J., Wang, C. F. and Allen, G. C., 2008. Effects of additives in lime-based mortar and paste. Journal of the Building Limes Forum, 15, pp. 48-56.

El-Turki, A., Carter, M. A., Wilson, M. A., Ball, R. J. and Allen, G. C., 2009. A microbalance study of the effects of hydraulicity and sand grain size on carbonation of lime and cement. Construction and Building Materials, 23 (3), pp. 1423-1428.

El-Turki, A., Ball, R. J., Carter, M. A., Wilson, M. A., Ince, C. and Allen, G. C., 2010. Effect of dewatering on the strength of lime and cement mortars. Journal of the American Ceramic Society, 93 (7), pp. 2074-2081.

El-Turki, A., Ball, R. J., Holmes, S., Allen, W. J. and Allen, G. C., 2010. Environmental cycling and laboratory testing to evaluate the significance of moisture control for lime mortars. Construction and Building Materials, 24 (8), pp. 1392-1397.

El. Reifi, M. H. and Emmitt, S., 2013. Perceptions of lean design management. Architectural Engineering and Design Management, 9 (3), pp. 195-208.

Elliott, K. S., Altamimi, A. and Paine, K. A., 2001. Precast concrete floors: The future. Concrete, 35 (9), pp. 56-59.

Ellul, F. and D'Ayala, D., 2005. Seismic vulnerability assessment of low engineered masonry infilled reinforced concrete frames. In: SECED Young Engineers Conference, 2005-03-01.

Ellul, F., D'Ayala, D. and Calayir, Y., 2004. The 1st of May 2003, Bingol, Turkey, earthquake, a study of the performance of the building stock. In: Proceedings of the 13th World Conference of Earthquake Engineering, 2004-01-01.

Ellul, F. and D'Ayala, D. F., 2004. On the vulnerability assessment of modern low technology engineered residential construction. In: Proceedings of the 13th World Conference of Earthquake Engineering, 2004-01-01.

Ellul, F. and D'Ayala, D., 2008. Push-over non linear analysis of infilled frames: realistic F.E models of panels and contact. In: 14th World Conference of Earthquake Engineering, 2008-10-12 - 2008-10-17.

Emmitt, S., 2002. 'Extreme sustainability - some reflections'. In: Erkelens, P. A. and de Jonge, S., eds. Beyond Sustainable Building. Eindhoven, The Netherlands: Eindhoven University Press, pp. 67-69.

Emmitt, S., 2000. Changing the habits of a lifetime? A critical perspective on sustainable building. In: Erkelens, P. A., de Jonge, S. and van Vliet, A. A., eds. Beyond Sustainability. Eindhoven, The Netherlands: Eindhoven University Press.

Emmitt, S., 2009. Creative architectural detailing:learning to push the boundaries. In: Emmitt, S. and Littlewood, J., eds. Proceedings of Detail Design in Architecture 8 (DDiA8), 2009. .

Emmitt, S., 2008. Design management:added value for sustainability. De Ontwerpmanager, 3, pp. 26-29.

Emmitt, S., 2009. Design managment for sustainability. Architectural Engineering and Design Management, 5 (1/2).

Emmitt, S., 2016. Editorial. Architectural Engineering and Design Management, 12 (3), pp. 149-150.

Emmitt, S., 2009. Managing design effort in architectural offices. In: Emmitt, S., Prins, M. and den Otter, A., eds. Architectural Management. Oxford, U. K.: Wiley-Blackwell, pp. 271-283.

Emmitt, S., 2007. On the ongoing importance of architectural management. In: 9607 En Verder ADMS. Eindhoven, The Netherlands: Eindhoven University Press, pp. 15-16.

Emmitt, S., 2013. Research processes and practicalities. In: Emmitt, S., ed. Architectural Technology. Chichester, U. K.: Wiley-Blackwell, pp. 231-246.

Emmitt, S., 2006. Researching a value-based approach to design and construction. In: Aouad, G., Kagioglu, M., Harris, K., de Ridder, H. A. J., Vrijhoef, R. and van den Broek, C., eds. Proceedings of 3rd International Salford Centre for Research and Innovation (SCRI) Symposium, 2006. Salford, U. K.: University of Salford, pp. 65-77.

Emmitt, S., 2001. Selling to specifiers:empathy and heterophily in the supply chain. In: Academic Proceedings of 2nd International Construction Marketing Conference, CIB-W65, 2001. , pp. 114-121.

Emmitt, S., 2011. Stretching the tradition:rediscovering the art of architectural detailing. In: Proceedings of Detail Design in Architecture 10. , pp. 3-11.

Emmitt, S., 2001. The architectural technologist:a timely innovation. In: Anumba, C. J., Egbu, C. and Thorpe, A., eds. Perspectives on Innovation in Architecture, Engineering and Construction, 2001. Loughborough, U. K.: Loughborough University, pp. 601-611.

Emmitt, S., 1997. The diffusion of environmentally responsible ideas and practices. In: Gray, M., ed. Evolving Environmental Ideas. Stockholm, Sweden: Royal Institute of Technology, Stockholm, pp. 41-49.

Emmitt, S., 1997. The diffusion of environmentally responsible ideas and practices. In: Gray, M., ed. Evolving Environmental Ideas. Stockholm, Sweden: Royal Institute of Technology, Stockholm, pp. 41-49.

Emmitt, S. and Christoffersen, A. K., 2009. Collaboration and communication in the design chain:a value-based approach. In: O'Brien, W. J., Formoso, C. T., Ruben, V. and London, K. A., eds. Construction Supply Chain Management Handbook. Boca Raton, U. S. A.: CRC Press, 5.1-5.17.

Emmitt, S. and Christoffersen, A. K., 2009. Exploring the value universe:a values-based approach to design management. In: Emmitt, S., Prins, M. and den Otter, A., eds. Architectural Management. Oxford, U. K.: Wiley-Blackwell, pp. 34-52.

Emmitt, S., Christoffersen, A. K. and Sander, D., 2004. Design management:a value based approach. In: Khosrowshahi, F., ed. Proceedings 20th Annual ARCOM Conference, 2004.Vol. 1. Reading, U. K.: Association of Researchers in Construction Management (ARCOM), pp. 174-184.

Emmitt, S., Christoffersen, A. K. and Sander, D., 2005. Implementing a value based approach to construction. In: Emmitt, S. and Prins, D., eds. Designing Value. Lyngby, Denmark: Technical University of Denmark, pp. 19-28.

Emmitt, S. and Heaton, B., 2003. The introduction of approved document L:a study of enforced change. In: Greenwood, D. J., ed. Proceedings 19th Annual ARCOM Conference, 2003.Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 83-89.

Emmitt, S. and Johnson, M., 2004. Observing designers:disparate values and the realization of design intent. In: Building for the Future, Proceedings of CIB World Building Congress, 2004. Ottawa, Canada: National Research Council of Canada.

Emmitt, S., Pasquire, C. and Mertia, B., 2011. Addressing the architect/contractor interface:a lean design management perspective. In: Otter, A., Emmitt, S. and Achammer, C., eds. Architectural Management in the Digital Arena, Proceedings of CIB W-096, 2011. Eindhoven, Netherlands: Eindhoven University Press, pp. 110-119.

Emmitt, S., Sander, D. and Christoffersen, A. K., 2004. Implementing value through lean design. In: Bertelsen, S. and Formoso, C. T., eds. Proceedings of 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 2004. Lean Construction, pp. 361-374.

Emmitt, S., Sander, D. and Christoffersen, A. K., 2005. The value universe:defining a value-based approach to lean construction. In: Proceedings of 13th Annual Conference of the International Group on Lean Construction (IGLC) , 2005. , pp. 57-64.

Emmitt, S. and West, B., 2003. Incorporating research into an undergraduate module:learning to detail from first (ecologically sound) principles. In: Proceedings 19th Annual ARCOM Conference, 2003.Vol. 2. Association of Researchers in Construction Management (ARCOM), pp. 605-612.

Emmitt, S. and Wyatt, D., 2000. Worlds within worlds:networking towards ecological building. In: Sustainable Product Information, Proceedings of UICB/W102, 2000. .

Emmitt, S. and den Otter, A., 2007. Managing design with the effective use of communication media. In: Proceedings of CIB World Building Congress. .

Emmitt, S., 2011. Design Management for Architects. China Architecture & Building Press.

Emmitt, S., 2016. Editorial. Architectural Engineering and Design Management, 12 (1), pp. 1-2.

Emmitt, S., 2016. Editorial. Architectural Engineering and Design Management, 12 (4), pp. 251-252.

Emmitt, S., 2016. Editorial. Architectural Engineering and Design Management, 12 (5), pp. 331-332.

Emmitt, S., 2007. Editorial:Special Issue - Aspects of Building Design Management. Architectural Engineering and Design Management, 3 (1), pp. 3-4.

Emmitt, S., 2006. Facilitating a value-based approach to design and construction through informal leadership:reflections on a Danish approach. In: Songer, A., Chinowsky, P. and Carrillo, P., eds. American Society of Civil Engineers (ASCE) Proceedings of the 2nd Specialty Conference on Leadership and Management in Construction, 2006. Louisville, U. S. A.: P. M. Publishing, pp. 274-281.

Emmitt, S., 2000. Informing the informers:current research and incorporation into the curriculum. In: British Institute of Architectural Technologists (BIAT) : Toward a Common Understanding of Architectural Technology, 2000, 2000-02-01.

Emmitt, S., 2005. Integrating teaching and research in an architectural technology undergraduate model. Journal of Engineering, Design and Technology, 3 (2), pp. 164-179.

Emmitt, S., 2011. Lean design management. Architectural Engineering and Design Management, 7 (2), pp. 67-69.

Emmitt, S., 2001. Observing the act of specification. Design Studies, 22 (5), pp. 397-408.

Emmitt, S., 2006. Selection and specification of building products:implications for design managers. Architectural Engineering and Design Management, 2 (3), pp. 176-186.

Emmitt, S., 2011. Technological design in a multi-disciplinary, sensory context. Techne. Journal of Technology for Architecture and Environment, 2, pp. 44-51.

Emmitt, S., 2001. Technological gatekeepers:the management of trade literature by design offices. Engineering, Construction and Architectural Management, 8 (1), pp. 2-8.

Emmitt, S., 2016. The construction design manager:a rapidly evolving innovation. Architectural Engineering and Design Management, 12 (2), pp. 138-148. Item availability may be restricted.

Emmitt, S. and Gorse, C. A., 2006. Barry's Advanced Construction of Buildings. Blackwell.

Emmitt, S. and Gorse, C. A., 2014. Barry's Advanced Construction of Buildings (3rd ed.). Wiley-Blackwell.

Emmitt, S. and Gorse, C. A., 2006. Communication in Construction Teams. Routledge. (Spon Research)

Emmitt, S. and Gorse, C. A., 2003. Construction Communication. Blackwell.

Emmitt, S., Olie, J. and Schmid, P., 2004. Principles of Architectural Detailing. Blackwell.

Emmitt, S., Olie, J. and Schmid, P., 2006. Principles of Architectural Detailing. China Electric Power Press.

Emmitt, S., Pasquire, C. and Mertia, B., 2012. Is good enough “making do”? An investigation of inappropriate processing in a small design and build company. Construction Innovation: Information, Process, Management, 12 (3), pp. 369-383.

Emmitt, S. and Ruikar, K., 2013. Collaborative Design Management. Routledge.

Emmitt, S. and Yeomans, D. T., 2014. Specifying Buildings:a Design Management Perspective. Butterworth-Heinemann.

Erkal, A., D'Ayala, D. and Sequeira, L., 2012. Assessment of wind-driven rain impact, related surface erosion and surface strength reduction of historic building materials. Building and Environment, 57, pp. 336-348.

Erkal, A., Tezcan, S. S. and Laefer, D. F., 2011. Assessment and code considerations for the combined effect of seismic base-isolation and viscoelastic dampers. ISRN Civil Engineering, 2011, 861451.

Eshwar, N., Nanni, A. and Ibell, T., 2003. CFRP strengthening of concrete bridges with curved soffits. In: Tenth Structural Faults and Repair Conference, 2003-01-01.

Eshwar, N., Nanni, A. and Ibell, T. J., 2008. Performance of two anchor systems of externally bonded fiber-reinforced polymer laminates. ACI Materials Journal, 105 (1), pp. 72-80.

Eshwar, N., Ibell, T. and Nanni, A., 2005. Effectiveness of CFRP strengthening on curved soffit RC beams. Advances in Structural Engineering, 8 (1), pp. 55-68.

Evernden, M., Darby, A. P. and Ibell, T. J., 2013. Engaging students with e-activities. The Structural Engineer, 91 (8), pp. 20-23.

Evernden, M. and Mottram, J., 2006. Characterisation of Unistrut connection method with pultruded fiber reinforced polymer channels. Journal of Materials in Civil Engineering, 18 (5), pp. 700-709.

Evernden, M., Mottram, J. and Delhees, P., 2004. Characterisation of Uni-strut connectors for pultruded fibre reinforced plastic channels. In: Proceedings 1st International Conference on Innovative Materials and Technologies for Construction and Restoration (IMTCR04).Vol. 1. Leece, Italy: Liguori Editore, pp. 620-632.

Evernden, M. and Mottram, T., 2011. A case for houses in the UK to be constructed of fibre reinforced polymer components. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (1), pp. 3-13.

Evernden, M. and Mottram, T., 2012. Double lap single and double bolt tension joints in PFRP leg angle connections. Submitted to: ICE Construction Materials

Evernden, M. and Mottram, T., 2005. Structural Performance of a Modular Box Beam Concept of Pultruded Fibre Reinforced Polymer Shapes. In: Third International Conference on Composites in Construction, 2005-07-11.

Evernden, M. and Mottram, T., 2007. Theoretical and experimental analysis of a modular PFRP box beam concept constructed of separate plate elements and mechanical fasteners. In: Third International Conference on Advanced Composites in Construction (ACIC 2007), 2007-04-02 - 2007-04-04.

Evernden, M. and Mottram, T., 2009. A case for houses in the UK to be constructed of fibre reinforced polymer components. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT), 2009-09-06 - 2009-09-09.

Evernden, M. and Mottram, T., 2012. A case for houses to be constructed of FRP components. ICE Construction Materials, 165 (CM1), 1000002.

Evernden, M. and Pelly, R., 2009. Single bolt tension joints in pultruded PFRP leg angle connections. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Evernden, M. and Smith, J., 2011. Concentric and eccentric compression tests on PFRP equal angles. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Evins, R., Joyce, S.C., Pointer, P., Sharma, S., Vaidyanathan, R. and Williams, C., 2012. Multi-objective design optimisation:Getting more for less. Proceedings of the Institution of Civil Engineers - Civil Engineering, 165 (5), pp. 5-10.

Eyre, J., Ibell, T., Darby, A. and Nanni, A., 2007. An automated design aid for the strengthening of existing concrete bridges. In: Proceedings of Fibre-Reinforced Polymers for RC Structures (FRPRCS-8), 2007-07-01.

Falzone, P., Mannoni, T., Pesce, G., Pittaluga, P., Ricci, R. and Vecchiattini, R., 2001. I palazzi di via Garibaldi. Arkos Speciale G8, 2 (1), pp. 50-61.

Fasihnikoutalab, M., Asadi, A., Huat, B., Westgate, P., Ball, R. and Pourakbar, S., 2016. Laboratory-scale model of carbon dioxide deposition for soil stabilisation. Journal of Rock Mechanics and Geotechnical Engineering, 8 (2), pp. 1078-186.

Fasihnikoutalab, M., Westgate, P., Huat, B. B. K., Asadi, A., Ball, R., Nahazanan, H. and Singh, P., 2015. New Insights into Potential Capacity of Olivine in Ground Improvement. Electronic Journal of Geotechnical Engineering, 20 (8), pp. 2137-2148.

Fasihnikoutalab, M. H., Asadi, A., Huat, B. K., Ball, R. J., Pourakbar, S. and Singh, P., 2016. Utilisation of carbonating olivine for sustainable soil stabilisation. Environmental Geotechnics Item availability may be restricted.

Faulkner, D., Kjeldsen, T., Packman, J. and Stewart, L., 2011. Estimating flood peaks and hydrographs for small catchments:Phase I. Environment Agency.

Fernandoy, J., 2015. Lightweight Structures for Remote Areas. Thesis (Doctor of Philosophy (PhD)).

Fernandoy, J., Shepherd, P. and Richens, P., 2011. Geometry optimisation for adaptable lightweight structures in remote areas. In: 2011 IASS Annual Symposium: IABSE-IASS 2011: Taller, Longer, Lighter, 2011-09-20 - 2011-09-23.

Ferreira Pinto Da Silva, C., Rana, C., Maskell, D., Dengel, A., Ansell, P. and Ball, R. J., 2016. Influence of eco-materials on Indoor Air Quality. Green Materials, 4 (2), pp. 72-80. Item availability may be restricted.

Ferreira Pinto Da Silva, C. F., Maskell, D., Ball, R. and Ansell, M., 2014. The physical, chemical and mechanical properties of eco-materials for passive indoor environmental control. In: Advanced Building Skins Conference Proceedings of the 9th ENERGY FORUM, 2014-10-28 - 2014-10-29.

Filz, G. and Naicu, D., 2015. "2 Landscapes" - interaction of 2 gridshells based on a modified Stewart-Gough principle. In: IASS Working Groups 12 + 18 International Colloquium, 2015-04-10 - 2015-04-13, Tokyo Denki University.

Fitzgerald, C. J., Taylor, P. H., Eatock Taylor, R., Grice, J. and Zang, J., 2014. Phase manipulation and the harmonic components of ringing forces on a surface-piercing column. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 470 (2168), 20130847.

Fodde, E., 2003. An Approach to Archaeological Sites in Central Asia: the Conservation of Otrar Tobe, Kazakhstan. Selection and Evaluation of Repair Material. In: Terra 2003, 9th International Conference on the Study and Conservation of Earthen Architecture, 29 November – 2 December, 2003 , Yazd, Iran. , pp. 170-183.

Fodde, E., 2006. Analytical Methods for the Conservation of the Buddhist Temple II of Krasnaya Rechka, Kyrgyzstan. Conservation and Management of Archaeological Sites, 8 (3), pp. 136-153.

Fodde, E., 2006. Conserving sites on the Central Asian Silk Roads: the case of Otrar Tobe, Kazakhstan. Conservation and Management of Archaeological Sites, 8 (2), pp. 77-87.

Fodde, E., 2005. Field and Laboratory Assessment of Mud Mortars of the Later Mosque and Palace Area, Otrar Tobe, Kazakhstan. In: Conservation and Management of Archaeological and Earthen Structures and Sites in Otrar/Turkestan. Almaty: UNESCO - University of Aachen, pp. 55-64.

Fodde, E., 2007. Fired Brick and Sulphate Attack: The Case of Moenjodaro, Pakistan. Journal of Architectural Conservation, 13 (1), pp. 69-80.

Fodde, E., 2002. Lavorazione e Finitura Tradizionale della Pietra di Serrenti: Tecniche e Saperi Artigianali. In: Bellu, A. and Atzeni, A., eds. Architetture in Pietra: materiali e architetture tra innovazione e tradizione. Serrenti: Comune di Serrenti, pp. 15-20.

Fodde, E., 2001. Legno e architettura vernacolare in Sardegna. Adrastea, VIII (17), pp. 42-47.

Fodde, E., 2005. Sardinia's Vernacular Earthen Architecture. In: Petzet, M., ed. ICOMOS World Report on Monuments and Sites in Danger, 2004-2005. Munich: KG Saur Publishing, pp. 134-136.

Fodde, E., 2001. Surveying Craftsmen and Conservators through a Questionnaire. In: Burman, P. and Fodde, E., eds. This Common Bond - Training Cathedral Craftsmen and Conservators for the Next Generation. York: University of York, pp. 23-32.

Fodde, E., 2004. The Conservation of Otrar Tobe, Kazakhstan: Characterization and Evaluation of Repair Materials for the Bath House. In: Preservation and Development of Historical and Cultural Environment in Natural and Urban Conditions in Modern Central Asia, 2004-01-01.

Fodde, E., 2005. The Vernacular Earthen Building Tradition of Sardinia (Italy): Cultural and Conservation Questions. In: Kerpic'05 - Living in Earthen Cities, 2005-07-06 - 2005-07-07.

Fodde, E., 2002. Theme 5: Political, Legal and Economic Context: Promotion and Conciousness Raising. In: Eighth International Conference on the Study and Conservation of Earthen Architecture (Terra 2000), 2000-05-11 - 2000-05-13.

Fodde, E., 2007. Traditional Earthen Construction and Repair Methods in Sardinia, Italy. Vernacular Architecture, 38 (1), pp. 61-69.

Fodde, E., Watanabe, K. and Fujii, Y., 2009. Learning from vernacular wisdom: Mud brick construction in Tajikistan. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09.

Fodde, E., 2008. Analytical investigation of traditional lime plasters:The case of Sardinia, Italy. International Journal of Architectural Heritage, 2 (2), pp. 187-198.

Fodde, E., 2010. Conservation and conflict in the central Asian silk roads. Journal of Architectural Conservation, 16 (1), pp. 75-94.

Fodde, E., 1999. Conservation of Mud and Stud Architecture in Lincolnshire. In: Achenza, M. and Sanna, A., eds. Abitare la Terra. Cagliari, Italy: Cuec Editrice, pp. 152-153.

Fodde, E., 2000. Decorative Interior Features of Twentieth-century Ladiri Buildings of Campidano and their Traditional Conservation Methods. In: Sterry, N., ed. Terra 2000 - 8th International Conference on the Study and Conservation of Earthen Architecture. London: James and James, pp. 125-131.

Fodde, E., 2008. Fired brick conservation in the Kyrgyz Silk Roads:The case of Burana's Mausoleum 4. Journal of Architectural Conservation, 14 (1), pp. 77-94.

Fodde, E., 1999. L'oro dei Campi. Bioarchitettura, V (13), p. 27.

Fodde, E., 2000. Prime Ipotesi sui Meccanismi di Degrado delle Malte di Calce del Campidano. Informazione, XII (87), pp. 41-43.

Fodde, E., 1998. Produzione e Uso della Calce, Oltre la Tradizione. Informazione, XX (80), pp. 16-20.

Fodde, E., 2008. Structural Faults in Earthen Archaeological Sites in Central Asia: Analysis and Repair Methods. In: D'Ayala, D. F. and Fodde, E., eds. Proceedings of the 6th International Conference on Structural Analysis of Historic Construction.Vol. 2. Taylor & Francis, pp. 1415-1422.

Fodde, E., 2000. Terra in Inghilterra, Tecnologie per il Recupero e per il Restauro. Bioarchitettura, VI (19), pp. 34-35.

Fodde, E., 2008. The influence of soluble salts on the decay of Moenjodaro, Pakistan. Structural Survey, 26 (3), pp. 223-241.

Fodde, E., 2009. Traditional Earthen Building Techniques in Central Asia. International Journal of Architectural Heritage, 3 (2), pp. 145-168.

Fodde, E., Fujii, Y. and Watanabe, K., 2011. 3D visualization of historic earthen structures for the documentation of deterioration processes and conservation work: the case of the ancient Buddhist monastery of Ajina Tepa, Tajikistan. In: Terrasia 2011, International Conference on Earthen Architecture in Asia, 2011-10-11 - 2011-10-14.

Fodde, E. and Khan, M. S., 2010. Moenjodaro: A World Heritage Site at Risk. The Historic Environment: Policy & Practice, 1 (1), pp. 52-69.

Fodde, E. and Khan, M. S., 2013. Affordable monsoon rain mitigation measures in the World Heritage site of Moenjodaro, Pakistan. International Journal of Architectural Heritage

Fodde, E. and Khan, S., 2009. The Use of Soil in the Conservation of Moenjodaro (Pakistan), a World Heritage Site at Risk. In: Mediterra, 1st Mediterranean Conference on Earthen Architecture, 2009-03-13 - 2009-03-16.

Fodde, E., Sala, R. and Deom, J., 2013. Managing and conserving large oases in southwest Kazakhstan. Conservation and Management of Archaeological Sites, 15 (2), pp. 152-168.

Fodde, E., Watanabe, K. and Fujii, Y., 2011. Conservation and Documentation of the Buddhist Monastery of Ajina Tepa, Tajikistan: Heritage of the Silk Roads. In: Rainer, L., Bass Rivera, A. and Gandreau, D., eds. Terra 2008: 10th International Conference on the Study and Conservation of Earthen Architecture, 1-5 February, 2008, Bamako, Mali. , pp. 171-176.

Fodde, E., Watanabe, K. and Fujii, Y., 2007. Preservation of earthen sites in remote areas: The Buddhist monastery of Ajina Tepa, Tajikistan. Conservation and Management of Archaeological Sites, 9 (4), pp. 194-218.

Fodde, E., Watanabe, K. and Fujii, Y., 2013. Measuring evaporation distribution of mud brick and rammed earth. Structural Survey, 32 (1), pp. 32-48.

Fong, P. S.-W., Hills, M. J. and Hayles, C. S., 2007. Dynamic knowledge creation through value management teams. Journal of Management in Engineering, 23 (1), pp. 40-49.

Fontes, M., Aljawabra, F. and Nikolopoulou, M., 2008. Open Urban Spaces Quality: a study in a historical square in Bath-UK. In: 25th International Conference on Passive and Low Energy Architecture, 2008-10-01.

Fontes, M., Bartholomei, C., Dacanal, C., Nikolopoulou, M. and Labaki, L., 2008. Desempenho Socio Ambiental de Espacos Publicos Abertos em Cidades do Iterior Paulista. In: PLURIS 2008: 3o Luso Brazilian Conference on Urban, Regional, Integrated and Sustainable Planning, 2008-09-01.

Fontes, M. S. G. and Nikolopoulou, M., 2007. Use of open public spaces in different meteorological conditions: case studies in Bath, UK. In: ENCAC, 2007-08-08 - 2007-08-10.

Forster, A. M., Fernie, S., Carter, K., Walker, P. and Thomson, D., 2015. Innovation in low carbon construction technologies:an historic analysis for obviating defects. Structural Survey, 33 (1), pp. 52-72.

Forsyth, M., 2007. Structures and Construction in Historic Building Conservation. Blackwell Publishing. (Historic Building Conservation)

Forsyth, M., 1990. Lecons de la boite a chausseures. L'Architecture d'Aujourdhui, 1990 (268), pp. 158-161.

Forsyth, M., 1983. Theme and variations:approaches to auditorium design. Architects' Journal, 1983 (8), pp. 49-53.

Forsyth, M., 2003. Victorian and Edwardian Bath:the forgotten years. The Victorian, 2003 (14), pp. 4-9.

Forsyth, M. G. D., 2001. The nineteenth century suburban villa. In: Looking Forwards. Cottbus, Germany: Brandenburgische Technische Universitat.

Forsyth, M., 2003. Bath. Yale University Press. (Pevsner Architectural Guides)

Forsyth, M., 2009. Concert Halls. In: Goode, P., ed. The Oxford Companion to Architecture.Vol. 1. Oxford: Oxford University Press, pp. 201-203.

Forsyth, M., 1998. Edward Davis:nineteenth century Bath architect and pupil of Sir John Soane. In: Buchanan, B. B., ed. Bath History. Bath, U. K.: Millstream Books, pp. 107-128.

Forsyth, M., 1997. Il rapporto tra musica e architettura nei teatri storici. In: Teatri Storici. Fiesole, Italy: Nardini Editore, pp. 115-129.

Forsyth, M., 2009. Opera houses. In: Goode, P., ed. The Oxford Companion to Architecture. Oxford, U. K.: Oxford University Press, pp. 670-674.

Forsyth, M. and Ertug, A., 2010. Palaces of Music:Opera Houses of Europe. Ertug & Kocabiyik.

Forsyth, M., Ousterhaut, R., Kuban, D. and Ertug, A., 2011. Domes:A Journey through European Architectural History. Ertug & Kocabiyik.

Fossati, S., Pesce, G. L. A. and Decri, A., 2009. Lo studio della provenienza del legno attraverso l’analisi delle curve di accrescimento. Notiziario di Archeologia Medievale, 78, pp. 8-9.

Fossati, S., Pesce, G. and Decri, A., 2011. Provenance study of wood found in archaeological and architectural objects. In: Turbanti-Memmi, I., ed. 37th International Symposium on Archaeometry, 2008-05-11 - 2008-05-15. Berlin: Springer, pp. 405-409.

Foster, R. and Ibell, T., 2016. A numerical solution for the shape of fabric-formed concrete structures. Structures, 8 (1), pp. 17-24. Item availability may be restricted.

Fourie, C., 2012. Development of an unfired clay masonry system. Thesis (Master of Philosophy (MPhil)). University of Bath.

Fox, M., Coley, D., Goodhew, S. and De Wilde, P., 2014. Thermography methodologies for detecting energy related building defects. Renewable and Sustainable Energy Reviews, 40, pp. 296-310.

Fox, M., Coley, D., Goodhew, S. and De Wilde, P., 2015. Time-lapse thermography for building defect detection. Energy and Buildings, 92, pp. 95-106.

Fraternali, F., Spadea, S. and Ascione, L., 2013. Buckling behavior of curved composite beams with different elastic response in tension and compression. Composite Structures, 100, pp. 280-289.

Fraternali, F., Spadea, S. and Berardi, V. P., 2014. Effects of recycled PET fibres on the mechanical properties and seawater curing of Portland cement-based concretes. Construction and Building Materials, 61, pp. 293-302.

Frear, N., Darby, A. P. and Salo, A., 2003. A new method for measuring the dynamic response of cable net structures. The Structural Engineer, 81 (12), pp. 19-20.

Frost, A., 2009. From Classicist to Eclectic: The Stylistic Development of H. E. Goodridge. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Fujii, Y., Watanabe, K. and Fodde, E., 2008. Construction of Topographic Maps Using Close-range Photogrammetry for the Preservation of the Buddhist Monastery of Ajina Tepa, Tajikistan. In: International Symposium on Conservation of Ancient Sites 2008, an ISRM-Sponsored Regional Symposium, 2008-09-21 - 2008-09-24.

Fujii, Y., Watanabe, K. and Fodde, E., 2008. Three-dimensional photogrammetric documentation of the Buddhist Monastery of Ajina Tepa, heritage of the Ancient Silk Roads. In: 43rd Japan National Conference on Geotechnical Engineering (JNCGE), 2008-01-01.

Fujii, Y., Fodde, E., Watanabe, K. and Murakami, K., 2009. Digital photogrammetry for the documentation of structural damage in earthen archaeological sites: the case of Ajina Tepa, Tajikistan. Engineering Geology, 105 (1-2), pp. 124-133.

Futcher, J. A., Kershaw, T. J. and Mills, G., 2013. Urban form and function as building performance parameters. Building and Environment, 62, pp. 112-123.

Futcher, J. A. and Kershaw, T., 2016. Forthcoming. Urban Form as an Energy Management Parameter. In: Integrated Design at 50: Building our Future, 2016-06-30 - 2016-07-01, University of Bath.

Füllekrug, M., Roussel-Dupré, R., Symbalisty, E. M. D., Colman, J. J., Chanrion, O., Soula, S., van der Velde, O., Odzimek, A., Bennett, A. J., Pasko, V. P. and Neubert, T., 2011. Relativistic electron beams above thunderclouds. Atmospheric Chemistry and Physics, 11 (15), pp. 7747-7754.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2009. Development of a robust mechanical shear connector between FRP and concrete for FRP stay-in-place participating formwork. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. Experimental investigation of a novel FRP-concrete composite floor slab. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. FRP concrete composite floor slabs. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Gai, X., Darby, A., Ibell, T., Evernden, M. and Matthews, S., 2009. FRP stay-in-place participating formwork: design considerations and preliminary testing. In: Advanced Composites in Construction 2009 (ACIC), 2009-09-01 - 2009-09-03.

Gai, X., Darby, A., Ibell, T., Evernden, M. and Orr, J., 2011. Permanent participating FRP formwork for concrete floor slabs. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10), 2011-04-02 - 2011-04-04.

Gale, L. and Ibell, T. J., 2005. Multiple anchorage zones in fibre-reinforced polymer prestressed concrete structures. Magazine of Concrete Research, 57 (3), pp. 149-166.

Gale, L., Ibell, T. J. and Williams, C., 2006. Analysis of doubly loaded end blocks in FRP-prestressed concrete. Magazine of Concrete Research, 58, 547--563.

Gale, L. and Ibell, T., 2000. Effects of compression reinforcement on the shear strength of reinforced concrete bridge beams. Magazine of Concrete Research, 52 (4), pp. 275-285.

Gale, L. and Ibell, T., 2002. The effect of reinforcement anchorage on concrete shear capacity. In: IABSE Symposium,, 2002-09-01.

Gantzer, P. A., Bryant, L. and Little, J. C., 2009. Lake and Reservoir Management – 2009 Literature Review. Water Environment Research, 81 (10), pp. 1854-1956.

Gantzer, P. A., Bryant, L. and Little, J. C., 2009. Controlling soluble iron and manganese in a water-supply reservoir using hypolimnetic oxygenation. Water Research, 43 (5), pp. 1285-1294.

Gantzer, P. A., Bryant, L. and Little, J. C., 2009. Effect of hypolimnetic oxygenation on oxygen depletion rates in two water-supply reservoirs. Water Research, 43 (6), pp. 1700-1710.

Gao, F., Zang, J. and Blenkinsopp, C., 2014. Numerical simulation of a solitary wave on a continental shelf. In: The 10th UK Young Coastal Scientists and Engineers Conference, 2014-04-14 - 2014-04-15.

Gao, F. and Zang, J., 2014. Numerical simulations of breaking waves at vertical wall. In: 11th (2014) Pacific/Asia Offshore Mechanics Symposium, PACOMS 2014, 2014-10-12 - 2014-10-16. International Society of Offshore and Polar Engineers, pp. 230-234.

Garbarino, G. B., Lassa, S., Delmonte, A. and Pesce, G. L., 2012. A proposito di insediamenti e castelli nella Langa tra le due Bormide. In: Garbarino, G. B. and Morresi, M., eds. Una chiesa bramantesca a Roccaverano. S. Maria Annunziata (1509-2009), 2009-05-28 - 2009-05-29. Acqui Terme, Italy: Impressioni Grafiche.

Garbett, J., Darby, A. P. and Ibell, T. J., 2010. Optimised beam design using innovative fabric-formed concrete. Advances in Structural Engineering, 13 (5), pp. 849-860.

Gardner, L. and Cruise, R. B., 2007. Residual stresses in structural stainless steel members. In: Beale, R. G., ed. Proceedings of the 6th International Conference on Steel and Aluminium Structures. Oxford: Oxford Brookes University Press, pp. 1058-1065.

Gardner, L., Cruise, R. B., Sok, C. P., Krishnan, K. and Ministro, J., 2007. Life cycle costing of metallic structures. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 160 (ES4), pp. 167-177.

Gardner, L. and Cruise, R., 2009. Modeling of Residual Stresses in Structural Stainless Steel Sections. Journal of Structural Engineering, 135 (1), pp. 42-53.

Garvin, S. L., Hayles, C. S. and Tedd, P., 1996. Cementitious cut-off walls with PFA additions. In: 3rd International Symposium on Environmental Contamination in Central and Eastern Europe, 1996-09-09 - 1996-09-13.

Garvin, S. L., Phillipson, M. C., Sanders, C. H., Hayles, C. H. and Dow, G. T., 1998. Impact of Climate Change on Building. CRC Press. (BRE Reports; BR349)

Garvin, S. L., Ridal, J. P. and Hayles, C. S., 2002. The use of waste materials in aggregate concrete blocks. London: Thomas Telford, pp. 393-401.

Garvin, S. L. and Hayles, C. S., 1999. The chemical compatibility of cement–bentonite cut-off wall material. Construction and Building Materials, 13 (6), pp. 329-341.

Gates, P., 2010. A newcomer's perspective. Elevation: The Journal of the Society of Facade Engineering

Gates, P., 2013. Polymeric Facades:Advanced composites for retrofit. Thesis (Doctor of Philosophy (PhD)). Faculty of Engineering & Design.

Gates, P., Darby, A., Evernden, M. and Ibell, T., 2011. An FRP durability study: Mechanical testing of panels from the Second Severn Visitors Centre. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Gates, P., Ibell, T., Darby, A. and Evernden, M., 2013. Polymeric facades:fatigue performance of pultruded panel connections. In: Zingoni, A., ed. SEMC 2013: The Fifth International Conference on Structural Engineering, Mechanics and Computation, 2013-09-01 - 2013-09-03. Abingdon, U. K.: CRC Press, pp. 625-629.

Gates, P., Ibell, T., Darby, A., Evernden, M. and Kragh, M., 2012. Advanced composites for facade retrofit. The Structural Engineer, 90 (1), pp. 46-48.

Gates, P., Ibell, T., Darby, A., Evernden, M., Lo, S. N. G. and Kragh, M., 2012. Polymeric facades: advanced composites for retrofit. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. Proceedings of the 6th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VI 2012), Kingston, Ontario, Canada, 22-25 May 2011. Canadian Society for Civil Engineering (CSCE), pp. 101-108.

Gatóo, A., Sharma, B., Bock, M., Mulligan, H. and Ramage, M. H., 2014. Sustainable structures:Bamboo standards and building codes. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 167 (5), pp. 189-196.

Gavin, K., O'Kelly, B., Adekunte, A. and Donohue, S., 2005. The use of the cone penetration test to derive parameters for shallow foundation design. In: International Conference on Soil-Structure Interaction : Calculation Methods and Engineering Practice, 2005-01-01.

Gebreiter, D., 2012. Structuring Free-Form Building Envelopes. Thesis (Master of Philosophy (MPhil)). University of Bath.

Georgiou, O., Shepherd, P. and Richens, P., 2011. Performance based interactive analysis. In: Design Modelling Symposium, 2011-10-07 - 2011-10-12.

Giampiccolo, A., Ball, R., Ansell, M. and Maskell, D., 2014. Synthesis of Co-doped TiO2 nanostructures for novel photo-catalytic coatings. In: ENERGY FORUM on Advanced Building Skins, 2014-10-28 - 2014-10-29, Forum Bressanone, Via Roma 9 in Bressanone.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2013. A case study investigation into the use of computer generated visualizations to assist with construction delay claims. Brisbane, Australia: Queensland University of Technology.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2013. An investigation into whether building information modeling (BIM) can assist with construction delay claims. International Journal of 3-D Information Modeling (IJ3DIM), 2 (1), pp. 45-52.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2012. An investigation into whether building information modeling (BIM) can assist with construction delay claims. In: Greenwood, D., ed. First UK Academic Conference on Building Information Modelling. Northumbria, U. K.: , pp. 36-44.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2014. Recommendations on the creation of computer generated exhibits for construction delay claims. Construction Law Journal, 30 (4), pp. 236-248.

Gibbs, D. J., Emmitt, S., Lord, W. and Ruikar, K., 2015. BIM and construction contracts:CPC 2013's approach. Proceedings of the ICE - Management, Procurement & Law, 168 (6), pp. 285-293.

Gibbs, D.-J., Lord, W., Emmitt, S. and Ruikar, K., 2016. An interactive exhibit to assist with understanding of project delays. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction

Gilbert, M., Darwich, W., Tyas, A. and Shepherd, P., 2005. Application of Large-scale Layout Optimization Techniques in Structural Engineering Practice. In: 6th World Congresses of Structural and Multidisciplinary Optimization, 2005-05-30 - 2005-06-03.

Gkikas, G., Grammatikos, S., Aggelis, D. G. and Paipetis, A. S., 2012. Simultaneous acoustic and dielectric real time curing monitoring of epoxy systems. In: SPIE Smart Structures/NDE 2012, 2012-03-11 - 2012-03-15.

Glass, J., Dyer, T., Georgopoulos, C., Goodier, C., Paine, K., Parry, T., Baumann, H. and Gluch, P., 2013. Future use of life-cycle assessment in civil engineering. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 204-212.

Glendinning, S., Helm, P. R., Rouainia, M., Stirling, R. A., Asquith, J. D., Hughes, P. N., Toll, D. G., Clarke, D., Powrie, W., Smethurst, J., Hughes, D., Harley, R., Karim, R., Dixon, N., Crosby, C., Chambers, J., Dijkstra, T., Gunn, D., Briggs, K. and Muddle, D., 2015. Research-informed design, management and maintenance of infrastructure slopes:development of a multi-scalar approach. IOP Conference Series: Earth and Environmental Science, 26 (1), 012005.

Gonzalez Murillo, C., Ansell, M. and Walker, P., 2005. Henequen fibres for reinforcement of unfired earth blocks. In: Proc. of the Eleventh International Conference for Renewable Resources and Plant Biotechnology (NAROSSA), 2005-01-01.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2000. A critical examination of research methodologies for studying human communication in the construction industry. In: Akintoye, A., ed. Proceedings of 16th ARCOM Conference, 2000.Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 31-37.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2000. Interaction analysis during design team meetings. In: Akintoye, A., ed. Proceedings 16th Annual ARCOM Conference, 2000.Vol. 2. Association of Researchers in Construction Management (ARCOM), pp. 763-769.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2002. Interaction characteristics of successful contractors' representatives'. In: Greenwood, D., ed. Proceedings of 18th Annual ARCOM Conference, 2002. .

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2001. Interaction process analysis:a methodology for researching construction communication. In: Emmitt, S., ed. Detailing Design - Towards a Joined-Up Industry. , pp. 41-49.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2001. Models of group and interpersonal interaction during management and design team meetings. In: Emmitt, S., ed. Detailing Design - Towards a Joined-Up Industry. , pp. 50-59.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2001. Project performance and management and design team communication. In: Akintoye, A., ed. Proceedings of ARCOM 17th Annual Conference, 2001.Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 705-712.

Gorse, C. A. and Emmitt, S., 2005. Group interaction research methods. In: Khosrowshahi, F., ed. Proceedings of 21st Annual Conference ARCOM, 2005.Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 13-22.

Gorse, C. A. and Emmitt, S., 2004. Management and design teamcommunication:responding to change. In: Proceedings of COBRA Annual Conference, RICS, 2004. .

Gorse, C. A. and Emmitt, S., 2005. Small group interaction research methods. In: Emmitt, S. and Prins, M., eds. Designing Value. Rotterdam, The Netherlands: , pp. 103-113.

Gorse, C. A. and Emmitt, S., 2007. Communication behaviour during management and design team meetings:a comparison of group interaction. Construction Management and Economics, 25 (11), pp. 1197-1213.

Gorse, C. A. and Emmitt, S., 2009. Informal interaction in construction progress meetings. Construction Management and Economics, 27 (10), pp. 983-993.

Gorse, C. A. and Emmitt, S., 2003. Investigating interpersonal communication during construction progress meetings:challenges and opportunities. Engineering, Construction and Architectural Management, 10 (4), pp. 234-244.

Gosling, P.D., Bridgens, B.N., Bartle, N., Albrecht, A., Alpermann, H., Angeleri, A., Canobbio, R., Barnes, M., Dieringer, F., Gellin, S., Lewis, W.J., Mageau, N., Mahadevan, R., Marion, J.-M., Marsden, P., Milligan, E., Phang, Y.P., Sahlin, K., Stimpfle, B., Suire, O. and Uhlemann, J., 2013. Analysis and design of membrane structures:Results of a round robin exercise. Engineering Structures, 48, pp. 313-328.

Grammatikos, S., Gkikas, G., Saganas, C., Grammatikos, S. A., Maistros, G. M., Barkoula, N.-M. and Paipetis, A. S., 2012. Dispersion monitoring of carbon nanotube modified epoxy systems. In: SPIE Smart Structures/NDE 2012, 2012-03-11 - 2012-03-15.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2014. Real-time debonding monitoring of composite repaired materials via electrical, acoustic, and thermographic methods. Journal of Materials Engineering and Performance, 23 (1), pp. 169-180.

Grammatikos, S., Kordatos, E. Z., Aggelis, D. G., Matikas, T. E. and Paipetis, A. S., 2012. Critical and subcritical damage monitoring of bonded composite repairs using innovative non-destructive techniques. In: SPIE Smart Structures/NDE 2012, 2012-03-11 - 2012-03-15.

Grammatikos, S., Kordatos, E. Z., Aggelis, D. G., Matikas, T. E. and Paipetis, A. S., 2012. Critical and subcritical damage monitoring of bonded composite repairs using innovative non-destructive techniques. In: TRANSPORT RESEARCH ARENA-YEAR 2012 (Finalist of the Young European Arena of Research 2012), 2012-04-23 - 2012-04-26.

Grammatikos, S., Kordatos, E. Z., Barkoula, N.-M., Matikas, T. E. and Paipetis, A. S., 2011. In service damage assessment of bonded composite repairs with full field thermographic techniques. In: Mini-Symposium: Micromechanics and modeling of Multifunctional Materials, 2011-07-14 - 2011-07-15.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2013. A combination of novel thermographic and electrical techniques for low-velocity impact damage identification in multifunctional composites. In: SPIE Smart Structures/NDE, 2013-03-10 - 2013-03-14.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2012. Bonded repair integrity monitoring of aerospace materials using combined non-destructive methods. In: Duracosys 2012, 2012-09-17 - 2012-09-19.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2012. Low-velocity impact damage identification using a novel current injection thermographic technique. In: SPIE Smart Structures/NDE 2012, 2012-03-11 - 2012-03-15.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2014. Service and maintenance damage assessment of composite structures using various modes of infrared thermography. In: Advanced Materials for Demanding Applications-AMDA 2014, 2014-04-07 - 2014-04-10.

Grammatikos, S., Kouli, M.-E., Gkikas, G. and Paipetis, A. S., 2012. Structural health monitoring of aerospace materials used in industry using electrical potential mapping methods. In: SPIE Smart Structures/NDE 2012, 2012-03-11 - 2012-03-15.

Grammatikos, S. and Paipetis, A. S., 2012. On the electrical properties of multi scale reinforced composites for damage accumulation monitoring. Composites Part B - Engineering, 43 (6), pp. 2687-2696.

Grammatikos, S. and Paipetis, A. S., 2011. Monitoring strain and damage in multi phase composite materials using electrical resistance methods. In: Mini-Symposium: Micromechanics and modeling of Multifunctional Materials,, 2011-07-14 - 2011-07-15.

Grammatikos, S. A. and , D. G. A., A., 2011. Continuous monitoring of setting and hardening of epoxy resin. In: NDTMS 2011, 2011-05-15 - 2011-05-18.

Grammatikos, S. A., Gkikas, G. and Paipetis, A., 2011. Monitoring strain and damage in multi phase composite materials using electrical resistance methods. In: SPIE Smart Structures/NDE 2011, 2011-03-09.

Grammatikos, S. A., Kordatos, E., Barkoula, N. M., Matika, T. E. and Paipetis, A. S., 2010. Repair integrity monitoring of composite aerostructures using thermographic imaging. In: SPIE Smart Structures/NDE 2010, 2010-03-07 - 2010-03-11.

Grammatikos, S. A., Kordatos, E. Z., Barkoula, N. M., Matikas, T. E. and Paipetis, A. S., 2011. Innovative non-destructive evaluation and damage characterization of composite aerostructures using thermography. Plastics, Rubber and Composites: Macromolecular Engineering, 40 (6-7), pp. 342-348.

Grammatikos, S. A., Kordatos, E. Z., Matikas, T. E., David, C. and Paipetis, A. S., 2014. Current injection phase thermography for low-velocity impact damage identification in composite laminates. Materials & Design, 55, pp. 429-441.

Grammatikos, S. A., Kordatos, E. Z., Barkoula, N.M., Matikas, T.E. and Paipetis, A.S., 2010. In-service damage monitoring of bonded composite repairs. In: Duracosys 2010, 2009-09-12.

Grammatikos, S. A., Kordatos, E.Z., Barkoula, N.M., Matikas, T.E. and Paipetis, A., 2010. Innovative non-destructive evaluations and damage characterization of composites. In: First Greek and First Greek – Ukrainian Conference on Fracture Mechanics of Materials and Structures, 2010-10-20 - 2010-10-23.

Grammatikos, S., Bekas, D., Grammatikos, S. A., Kouimtzi, C. and Paipetis, A. S., 2014. Linear and non-linear electrical dependency of carbon nanotube reinforced composites to internal damage. In: Advanced Materials for Demanding Applications-AMDA 2014, 2014-04-07 - 2014-04-10.

Grammatikos, S. A., Paipetis, A. S., Kordatos, E. Z., Barkoula, N.-M. and Matikas, T. E., 2011. In service damage assessment of bonded composite repairs with full field thermographic techniques. In: SPIE Smart Structures/NDE 2011, 2011-03-09.

Grammatikos, S. A., Zafari, B., Evernden, M. C., Mottram, J. T. and Mitchels, J. M., 2015. Moisture uptake characteristics of a pultruded fibre reinforced polymer flat sheet subjected to hot/wet aging. Polymer Degradation and Stability, 121, 407–419.

Grammatikos, S., Ball, R. and Evernden, M., 2015. Structural deformation assessment of glass fibre reinforced polymers subjected to hygrothermal ageing. In: 18th International Conference on Composite Structures (ICCS18), 2015-06-15 - 2015-06-18.

Grammatikos, S., Ball, R. J. and Evernden, M., 2014. Environmental degradation assessment of pultruded FRP profiles. In: Duracosys 2014, 2013-09-15, Japan.

Grammatikos, S., Ball, R. J. and Evernden, M., 2014. On the environmental degradation assessment of pultruded fibre reinforced polymers. In: 22nd International Conference on Composites / Nano Engineering (ICCE-22), 2014-07-13, Malta.

Grammatikos, S. and Evernden, M., 2015. A ‘complete’ characterization study of anomalous behaviour of hygrothermally aged FRPs. In: 6th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2015), 2015-09-08 - 2015-09-11, Portugal.

Grammatikos, S. and Evernden, M., 2015. On the estimates of durability of glass fibre reinforced polymers subjected to hot /wet aging. In: 10th International Conference on Composite Science and Technology (ICCST/10), 2015-09-02 - 2015-09-04, Portugal.

Grammatikos, S., Evernden, M. and Ball, R., 2015. Combined characterization of the effects of hot/wet aging on a pultruded GFRP plate. In: 20th International Conference on Composite Materials (ICCM 20), 2015-07-19 - 2015-07-24, Denmark.

Grammatikos, S., Evernden, M. and Ball, R., 2015. Effects of hygrothermal aging on pultruded glass fibre reinforced polymers:a complimentary study. In: Advanced Composites in Construction (ACIC 2015), 2015-09-09 - 2015-09-11.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2015. Service and maintenance damage assessment of composite structures using various modes of infrared thermography. In: Advanced Materials for Demanding Applications. IoP Publishing. (IOP Conference Series : Materials Science and Engineering; 74)

Grammatikos, S. A., Evernden, M., Mitchels, J., Zafari, B., Mottram, J. T. and Papanicolaou, G. C., 2016. On the response to hygrothermal aging of pultruded FRPs used in the civil engineering sector. Materials & Design, 96, pp. 283-295.

Grant, R. G. and Walker, P., 2003. Survey of building sands in Australia. Construction and Building Materials,, 17 (4), pp. 231-240.

Greaves, D. M., 2004. A quadtree adaptive method for simulating fluid flows with moving interfaces. Journal of Computational Physics, 194 (10), pp. 35-56.

Greaves, D. M., 2001. Interface Capturing with Hierarchical Grid Refinement. In: MARNET-CFD Workshop, 2001-01-01.

Greaves, D. M., 2004. Simulation of interface and free surface flows in a viscous fluid using adapting quadtree grids. International Journal for Numerical Methods in Fluids, 44 (10), pp. 1093-1117.

Greaves, D. M., 2006. Simulation of viscous water column collapse using adapting hierarchical grids. International Journal for Numerical Methods in Fluids, 50 (6), pp. 693-711.

Greaves, D. M., 2004. The use of adapting quadtree grids for simulating moving interface and viscous fluid free surface flows. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004), 2004-07-24 - 2004-07-28.

Greaves, D. M., 2006. Viscous wave interaction with structures. In: 21st International Workshop on Water Waves and Floating Bodies, 2006-01-01.

Greaves, D. M., 2006. Viscous wave interaction with structures using adapting quadtree grids and Cartesian cut cells. In: European Conference on Computational Fluid Dynamics, ECCOMAS CFD 2006, 2006-09-01.

Greaves, D. M., 2005. Viscous wave simulation using adapting quadtrees. In: 6th European Wave and Tidal Energy Conference, 2005-01-01.

Green, E., Barron, M. and Thompson, D., 2011. The effect of scattering surfaces in rectangular concert halls:A scale model analysis. In: 8th International Conference on Auditorium Acoustics, 2011-05-19 - 2011-05-21.

Gregg, M. C., Hall, R. A., Carter, G. S., Alford, M. H., Lien, R. C., Winkel, D. P. and Wain, D. J., 2011. Flow and mixing in Ascension, a steep, narrow canyon. Journal of Geophysical Research, 116 (C7), C07016.

Grice, J. R., Taylor, P. H., Eatock Taylor, R., Zang, J. and Walker, D. A. G., 2015. Extreme wave elevations beneath offshore platforms, second order trapping, and the near flat form of the quadratic transfer functions. Computers and Fluids, 119, pp. 13-25.

Griffiths, D. S., Winstanley, D. and Gabriel, Y., 2005. Learning shock:the trauma of return to formal learning. Management Learning, 36 (3), pp. 275-297.

Grist, E., 2014. The Implementation Of Innovative And Sustainable Construction Materials. Thesis (Doctor of Engineering (EngD)). University of Bath.

Grist, E., Paine, K., Heath, A., Norman, J. and Pinder, H., 2015. Structural and durability properties of hydraulic lime-pozzolan concretes. Cement & Concrete Composites, 62, pp. 212-223. Item availability may be restricted.

Grist, E., Paine, K., Heath, A. and Pinder, H., 2013. An Investigation into the Viability and Benefits of Modern Hydraulic Lime Concretes. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction, 2013-03-05 - 2013-03-08. New Delhi: Excel India Publishers, pp. 967-981.

Grist, E., Paine, K., Norman, J. and Heath, A., 2012. The feasibility and potential of modern hydraulic lime concretes. In: Concrete Structures for Sustainable Community, Fib Symposium, 2012-06-10 - 2012-06-14.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2013. Compressive strength development of binary and ternary lime-pozzolan mortars. Materials & Design, 52, pp. 514-523.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2015. The environmental credentials of hydraulic lime-pozzolan concretes. Journal of Cleaner Production, 93, pp. 26-37.

Gross, C. D. and Walker, P. J., 2014. Racking performance of timber studwork and hemp-lime walling. Construction and Building Materials,, 66 (15), pp. 429-435.

Gross, C., Harris, R., Walker, P. and Pritchett, I., 2012. Structural enhancement of timber stud framing using renewable insulation materials. In: 12th World Conference on Timber Engineering, 2012-07-15 - 2012-07-19.

Gross, C., 2009. Structural Performance of Prefabricated Straw Bale Panels. Thesis (Master of Philosophy (MPhil)). University of Bath.

Gross, C., Fovargue, J., Homer, P., Mander, T., Walker, P. and White, C., 2009. Lateral Stability of Prefabricated Straw Bale Housing. In: Sustainability in Energy and Buildings. Berlin: Springer, pp. 147-154.

Gross, C., Walker, P. and Pritchett, I., 2013. Compression resistance of confined timber stud walls. Proceedings of the Institution of Civil Engineers: Construction Materials:, 166 (3), pp. 175-183.

Gross, C. D., 2013. Structural enhancement of timber framing using hemp-lime. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Grusova, M., 2013. Shear transfer across a specific plane in CFRP strengthened reinforced concrete. In: Institution of Structural Engineers Young Researchers' Conference 2013, 2013-03-14.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Experimentally observed behaviour of CFRP sheet strengthening across a shear plane. In: 11th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-11), 2013-06-26 - 2013-06-28.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Lifetime extension of reinforced concrete structures. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2014. Shear capacity of FRP-strengthened reinforced concrete T-beams. In: The 7th International Conference on FRP Composites in Civil Engineering – CICE 2014, 2014-08-20 - 2014-08-22.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12, Belfast.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013 (ACIC 2013), 2013-09-10 - 2013-09-12.

Grusova, M., Ibell, T. J., Darby, A. P., Evernden, M. and Orr, J. J., 2014. Mechanics of failure in FRP strengthened reinforced concrete in shear. In: The Fourth International fib Congress, 2014-02-10 - 2014-02-14.

Gulia, S., Chinthala, S., Ferreira Pinto Da Silva, C., Rana, C., Mower, K., Dengel, A. and Khare, M., 2016. Emission Characteristics of Eco-friendly Sustainable Building Construction Material-Part I. In: Indoor Air 2016, 2016-07-03.

Gunawardena, K. and Kershaw, T., 2016. Green and Blue-space Significance to Urban Heat Island Mitigation. In: Integrated Design at 50: Building our Future, 2016-06-30 - 2016-07-01, University of Bath.

Hadi, M., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Performance of shear wall composed of LVL and cement fiber board sheathing. Journal of Asian Architecture and Building Engineering, 9 (2), pp. 463-469.

Hall, J., Arheimer, B., Borga, M., Brazdil, R., Claps, P., Kiss, A., Kjeldsen, T. R., Kriaučiūnienė, J., Kundzewicz, Z. W., Lang, M., Llasat, M. C., Macdonald, N., McIntyre, N., Mediero, L., Merz, B., Merz, R., Molnar, P., Montanari, A., Neuhold, C., Parajka, J., Perdigão, R. A. P., Plavcová, L., Rogger, M., Salinas, J. L., Sauquet, E., Schär, C., Szolgay, J., Viglione, A. and Blöschl, G., 2014. Understanding flood regime changes in Europe:A state of the art assessment. Hydrology and Earth Systems Science, 18, pp. 2735-2772.

Hall, J., Arheimer, B., Aronica, G. T., Bilibashi, A., Bohac, M., Bonacci, O., Borga, M., Burlando, P., Castellarin, A., Chirico, G. B., Claps, P., Fiala, K., Gaal, L., Gorbachova, L., Gul, A., Hannaford, J., Kiss, A., Kjeldsen, T., Kohnova, S., Koskela, J. J., Macdonald, N., Mavrova-Guirguinova, M., Ledvinka, O., Mediero, L., Merz, B., Merz, R., Molnar, P., Montanari, A., Osuch, M., Parajka, J., Perdigao, R. A. P., Radevski, I., Renard, B., Rogger, M., Salinas, J. L., Sauquet, E., Sraj, M., Szolgay, J., Viglione, A., Volpi, E., Wilson, D., Zaimi, K. and Bloschl, G., 2015. A European Flood Database: facilitating comprehensive flood research beyond administrative boundaries.

Hall, R. A., Alford, M. H., Carter, G. S., Gregg, M. C., Lien, R.-C., Wain, D. J. and Zhao, Z., 2014. Transition from partly standing to progressive internal tides in Monterey Submarine Canyon. Deep Sea Research Part II: Topical Studies in Oceanography, 104, pp. 164-173.

Harding, J. and Derix, C., 2011. Associative spatial networks in architectural design: Artificial cognition of space using neural networks with spectral graph theory. In: Design Computing and Cognition '10. New York: Springer, pp. 305-323. (Design Computing and Cognition '10)

Harding, J., Joyce, S., Shepherd, P. and Williams, C., 2012. Thinking Topologically at Early Stage Parametric Design. In: Advances in Architectural Geometry 2012, 2012-09-27 - 2012-09-30.

Harding, J. and Shepherd, P., 2011. Structural form finding using zero-length springs with dynamic mass. In: 2011 IASS Annual Symposium: IABSE-IASS 2011: Taller, Longer, Lighter, 2011-09-20 - 2011-09-23.

Harney, M., 2014. Conservation in Action: Monticello. In: Harney, M., ed. Gardens and Landscapes in Historic Building Conservation. Chichester: Wiley-Blackwell, pp. 413-420.

Harney, M., 2015. Conservation in Action: Strawberry Hill, Twickenham. In: Harney, M., ed. Gardens and Landscapes in Historic Building Conservation. Chichester, UK: Wiley-Blackwell, pp. 357-370.

Harney, M., 2014. Introduction: Gardens and Landscapes in Historic Building Conservation. In: Harney, M., ed. Gardens and Landscapes in Historic Building Conservation. Chichester, U. K: Wiley-Blackwell, xv-.xxiii..

Harney, M., 2011. Place-making for the Imagination: Horace Walpole and Strawberry Hill. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Harney, M., 2007. Pope and Prior Park: a study in landscape and literature. Studies in the History of Gardens & Designed Landscapes, 27 (3), pp. 183-196.

Harney, M., 2008. Strawberry Hill. Architectural Review, 224 (1341), pp. 72-77.

Harney, M. and Forsyth, M., 2014. The State Hermitage Museum and its Architecture. In: The Hermitage. Germany: Ertug & Kocabiyik, pp. 19-23.

Harries, K. A., Sharma, B. and Richard, M., 2012. Structural use of full culm bamboo:the path to standardization. International Journal of Architecture, Engineering and Construction, 1 (2), pp. 66-75.

Harris, R., 2014. Engineered timber structures in the UK. In: 3ème Forum International Bois Construction, 2013-04-25 - 2013-04-26, France.

Harris, R., 2007. Large scale timber construction in the past 10 years. In: 13th Internationales Holzbau-Forum, 2007-01-01.

Harris, R., 2007. Long Span Structures. In: 13th Internationales Holzbau-Forum, 2007-01-01.

Harris, R., 2004. Sustainability into Reality. Responsible Use of Timber. The Structural Engineer, 82 (17), pp. 24-27.

Harris, R., 2005. Sustainable structures - The Reality. In: SB05: World Sustainable Building Conference, 2005-09-27 - 2005-09-29.

Harris, R., Dickson, M. and Kelly, O., 2004. The Use of Timber Gridshells for Long Span Structures. In: 8th International Conference on Timber Engineering, 2004-01-01.

Harris, R. and Kelly, O., 2002. The structural engineering of the Downland Gridshell. In: 7th World Conference of Timber Engineering, 2002-08-01.

Harris, R. and Ledbetter, S., 1997. Joint sealing and air infiltration through cladding in tall buildings. In: Clarke, J. N., Tolloczko, J. and Viswanath, H. R., eds. Multi-purpose High-rise Towers and Tall Buildings. London: E & FN Spon, pp. 131-142.

Harris, R., Romer, J., Kelly, O. and Johnson, S., 2003. Design and Construction of the Downland Gridshell. Building Research and Information, 31 (6), pp. 427-454.

Harris, R. J. L., Kelly, O. and Dickson, M., 2003. Downland Gridshell - An Innovation in Timber Design. Proceedings of the Institution of Civil Engineers - Civil Engineering, 156 (1), pp. 26-33.

Harris, R., Gusinde, B. and Roynon, J., 2012. Design and construction of the pods sports academy, Scunthorpe, England. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19.

Harris, R., 2011. Design of timber gridded shell structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 164 (2), pp. 105-116.

Harris, R., 2014. Forthcoming. Innovative structural systems in timber. RFS Quarterly Journal of Forestry, 108 (4), pp. 40-45.

Harris, R., 2009. Prescriptive rules for timber: right and wrong applications. In: IABSE British Group Henderson Colloqium, 2009-07-01.

Harris, R. and Chang, W.-S., 2014. Teaching timber engineering. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Harris, R., Chang, W.-S., Walker, P. and Shanks, J., 2014. Engineering Research into Traditional Timber Joints. CONTEXT - Journal of The Institute of Historic Building Conservation

Harris, R., Gusinde, B. and Roynon, J., 2012. The Pods Sports Academy, Scunthorpe, England. In: World Conference of Timber Engineering 2012, 2012-07-16 - 2012-07-19.

Harris, R., Haskins, S. and Roynon, J., 2008. The Savill Garden gridshell:Design and construction. The Structural Engineer, 86 (17), pp. 27-34.

Harris, R., Roberts, P. and Hargreaves, I., 2010. Aligned with nature. Civil Engineering, 80 (11), p. 82.

Harris, R., Roberts, P. and Hargreaves, I., 2010. The John Hope Gateway Biodiversity Centre. In: World Conference on Timber Engineering 2010, 2010-06-20 - 2010-06-24.

Harris, R. and Roynon, J., 2008. The Savill Garden Gridshell design and construction. In: 10th World Conference of Timber Engineering, 2008-06-02 - 2008-06-05.

Harris, R., Shanks, J., Hodson, T. and Borer, P., 2009. The Wales Institute for Sustainable Education (WISE): non-conventional materials in mainstream construction. In: 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009), 2009-09-06 - 2009-09-09.

Harry, M., Zhang, H., Lemckert, C., Colleter, G. and Blenkinsopp, C., 2011. Remote sensing of water waves: wave flume experiments on regular and irregular waves. In: 20th Australasian Coastal and Ocean Engineering Conference 2011, COASTS 2011 and the 13th Australasian Port and Harbour Conference 2011, PORTS 2011, 2011-09-28 - 2011-09-30. Curran Associates, pp. 138-143.

Hart, V., 2003. 'Of little or even no importance to the architect': on absent ideals in Serlio's drawings in the Sixth Book, on domestic architecture. In: Palmer, R. and Frangenberg, T., eds. The Rise of the Image: Essays on the History of the Illustrated Art Book. Aldershot: Ashgate, pp. 87-104.

Hart, V., 2002. On Inigo Jones and the Stuart Legal Body. In: Tavernor, R., ed. Body and Building. Essays on the Changing Relation of Body and Architecture. Cambridge, Mass.: MIT Press, pp. 138-149.

Hart, V. and Tucker, R., 2001. "Immaginacy Set Free": Aristotelian Ethics and Inigo Jones's Banqueting House at Whitehall. Res: Journal of Anthropology and Aesthetics, 39, p. 151.

Hart, V. and Tucker, R., 2002. Ornament and the Work of Inigo Jones. Architectura, 32, pp. 36-52.

Hart, V., 2016. Forthcoming. British Classicism to 1700 and the Search for a National Architectural Style. In: Payne, A., ed. Companion to Early Modern Architecture. Chichester, U. K.: Wiley-Blackwell.

Hart, V., 2017. Forthcoming. London's Standard:Christopher Wren and the Heraldry of the Monument. Journal of the Heraldry Society

Hart, V. and Hicks, P., 2016. Forthcoming. Sansovino's Venice. Yale University Press.

Hart, V. and Hicks, P., 2014. Sebastiano Serlio on Architecture:Volume 1 - Chinese translation. China Architecture & Building Press.

Hart, V., 2003. A Pretty Impudent Countenance: John Vanbrugh's Seaton Delaval. arq: Architectural Research Quarterly, 7, p. 311.

Hart, V., 2013. A copy of the Oxford edition of Andrea Palladio's L'Antichita di Roma (1709). The Library: Transactions of the Bibliographical Society, 14 (2), pp. 208-212.

Hart, V., 2013. Book Review of Inigo's Stones, Inigo Jones, Royal Marbles and Imperial Power. Society of Architectural Historians of Great Britain Newsletter, 2013 (108), p. 20.

Hart, V., 2013. Book Review of Woolwich. Survey of London:Volume 48. The Burlington Magazine, October, pp. 717-718.

Hart, V., 2012. Book review of The Eighteenth-Century Church in Britain. Ecclesiological Society, 45, pp. 94-95.

Hart, V., 2016. Forthcoming. Five building portraits:Greenwich, Blenheim, St Mary le Strand, All Souls and the Radcliffe Camera. In: van Eck, C., ed. Companion to Architectural Theory and Practice, Landscape Architecture and Urbanism. Chichester, U. K.: Wiley-Blackwell.

Hart, V., 2012. Inigo Jones. Allegemeines Kunstlerlexikon

Hart, V., 2010. Inigo Jones, 'Vitruvius Britannicus'. Architectural History: Journal of the Society of Architectural Historians of Great Britain, 53, pp. 1-39.

Hart, V., 2011. Inigo Jones:The Architect of Kings. Yale University Press for The Paul Mellon Centre for Studies in British Art.

Hart, V., 2010. Inigo Jones:The Column and the Crown. Centre 30: National Gallery of Art, CASVA, 30, pp. 100-103.

Hart, V., 2002. Nicholas Hawksmoor: rebuilding ancient wonders. Yale University Press. (The Paul Mellon Centre for Studies in British Art)

Hart, V., 2008. Sir John Vanbrugh:Storyteller in Stone. Yale University Press for The Paul Mellon Centre for Studies in British Art.

Hart, V., 2010. Stadium. In: Grafton, A., Most, G. W. and Settis, S., eds. The Classical Tradition. Cambridge, Mass.: Harvard University Press, p. 907.

Hart, V., 2015. The Chinese Porcelain Display in the Topkapi Palace Museum, Istanbul. The Oriental Ceramics Society Newsletter, 23.

Hart, V., 2010. Theatre Architecture. In: Grafton, A., Most, G. W. and Settis, S., eds. The Classical Tradition. Cambridge, Mass.: Harvard University Press, pp. 933-994.

Hart, V., 2015. Untitled review. The Oriental Ceramics Society Newsletter, 23.

Hart, V. and Day, A., 1995. A computer model of the theatre of Sebastiano Serlio, 1545. Computers and the History of Art, 5 (1), pp. 41-52.

Hart, V., Day, A. and Robson, J., 1997. A computer reconstruction of Inigo Jones's Covent Garden Piazza, London, c.1640. Computers and the History of Art, 7 (2), pp. 81-86.

Hart, V. and Hicks, P., 2008. Palladio's Rome. Homewood Museum, Johns Hopkins University.

Hawkins, W., Orr, J., Shepherd, P. and Ibell, T., 2016. Forthcoming. Fabric formed concrete: physical modelling for assessment of digital form finding methods. In: 11th fib International PhD Symposium in Civil Engineering, 2016-08-29 - 2016-08-31, University of Tokyo.

Hayles, C., Graham, M. and Fong, P. S. W., 2010. Value management for sustainable decision making. Proceedings of the Institution of Civil Engineers-Municipal Engineer, 163 (1), pp. 43-50.

Hayles, C. S., 2009. An examination of decision making and knowledge management practices in post disaster housing reconstruction projects. In: CIBW055 & W065 : Construction Facing Worldwide Challenges, 2009-09-27 - 2009-10-01.

Hayles, C. S., 2009. An examination of decision making in post disaster housing reconstruction projects. In: The 19th World Conference on Disaster Management (WCDM), 2009-06-21 - 2009-06-24.

Hayles, C. S., 2006. An examination of the relationship between sustainability and affordability in residential housing markets. In: 12th Pacific Rim Real Estate Conference, 2006, 2006-01-22 - 2006-01-25.

Hayles, C. S., 1999. BRE's traditional building materials research. In: BRE's 50th Anniversary Seminar, 2000-08-11.

Hayles, C. S., 1999. Examples of the use of value management for social housing. In: Innovations in Housing, APM SIG, 1999, 1999-05-31.

Hayles, C. S., 2005. Housing affordability and life cycle costing. In: ATN Sustainability Symposium, 2005, 2005-09-08 - 2005-09-10.

Hayles, C. S., 2000. Introducing BRE's value management guidance documents. In: IVM Scottish Branch Annual Conference, 2000, 2000-06-14.

Hayles, C. S., 2001. Pulling together Scotland launch. In: Rethinking the Construction Client Conference, 2001, 2001-10-22.

Hayles, C. S., 2000. Stone masonry and heritage buildings. In: BRE Masonry Seminar, 2000, 2000-05-19.

Hayles, C. S., 2000. The Natural Stone Institute - the role of research. In: Seminar : Scottish Stone Liason Group, 2000, 2000-05-22.

Hayles, C. S., 1999. The application of value management within the social housing sector. In: National Housing Federation Seminar, 1999, 1999-05-20.

Hayles, C. S., 2003. Value management in the construction of sustainable communities. In: A World of Value. Hong Kong Institute of Value Management 6th Conference, 2003-11-26 - 2003-11-27.

Hayles, C. S. and Bilewu, T., 1998. The implementation of value management and benchmarking for improvements in social housing procurement. In: National Housing Federation Annual Conference, 1998, 1998-06-18 - 1998-06-20.

Hayles, C. S. and Bluck, B. J., 1995. An examination of some of the causes of sandstone deterioration at Culzean Castle, Scotland. In: Preservation and Restoration of Cultural Heritage, 1995-09-24 - 1995-09-29.

Hayles, C. S. and Bluck, B. J., 1995. Examination of some of the causes of sandstone deterioration at Culzean Castle, Scotland. SSCR journal : the quarterly news magazine of the Scottish Society for Conservation and Restoration, 6 (2), pp. 10-13.

Hayles, C. S. and Bluck, B. J., 1994. Sandstone decay mechanisms under examination on the balcony of Culzean Castle, South West Scotland. Venice, italy: Soprintendenza ai Beni Artistici e Storici di Venezia.

Hayles, C. S. and Cuckow, H. J., 2000. Value management - best value. In: RICS QS 2000 Conference, 2000-11-02.

Hayles, C. S., Dean, M., Lappin, S. A. and McCullough, J., 2013. Climate change adaptation:A decision support framework to encourage environmentally responsible behaviour. Smart and Sustainable Built Environment, 2 (2).

Hayles, C. S., Egbu, C., Hutchinson, V. J., Quintas, P., Ruikar, K. and Anumba, C. J., 2004. Getting Started in Knowledge Management:Concise Guidance for Construction Consultants and Contractors. Partners in Innovation Project. (BNE Report; 24)

Hayles, C. S., Egbu, C., Hutchinson, V. J., Quintas, P., Ruikar, K., Anumba, C. J. and Kurul, E., 2004. Knowledge Management for Sustainable Construction Competitiveness:Final Report, July 2004. Partners in Innovation Project. (BNE Report; 23)

Hayles, C. S. and Egbu, C. E., 2004. Will the knowledge management specialist please stand up!:Experiences from the UK construction industry and beyond. Association of Researchers in Construction Management (ARCOM), pp. 805-814.

Hayles, C. S. and Fong, P. S.-W., 2005. Communicating value management workshop outcomes for better teamwork and collaboration. In: Why Re-invent the Wheel? Hong Kong Institute of Value Management 7th Conference, 2005-06-02 - 2005-06-03.

Hayles, C. S. and Fong, P. S.-W., 2008. Strategies for the delivery of sustainable building projects:exploring the adoption of simple management tools to improve communication and collaboration. In: CIB W107 Construction in Developing Countries : Procurement, Ethics and Technology Construction in Developing Countries International Symposium, 2008, 2008-01-18 - 2008-01-20.

Hayles, C. S. and Graham, D., 2000. The F.A.S.T. approach to value management. In: Seizing Golden Opportunities. Hong Kong Institute of Value Management 4th Conference, 2000-11-07 - 2000-11-08.

Hayles, C. S., Gronqvist, M. and Bowles, G., 1997. Value from Construction:A Comprehensive Bibliopgraphy. CRC Press.

Hayles, C. S. and Holdsworth, S. E., 2005. Constructing stimulus:teaching sustainability to engender change. In: Fabricating Sustainability : 39th Annual Conference of the Architectural Science Association, 2005-11-17 - 2005-11-19.

Hayles, C. S. and Holdsworth, S. E., 2008. Curriculum change for sustainability. Journal of Education in the Built Environment (JEBE), 3 (1), pp. 25-48.

Hayles, C. S. and Holdsworth, S. E., 2005. New approaches to the teaching of sustainability for the construction disciplines. In: The 5th Australasian Conference of Sustainable Tertiary Education, 2005, 2005-09-21 - 2005-09-23.

Hayles, C. S. and Holdsworth, S. E., 2007. Student feedback on courses aimed at greening the curriculum of the built environment disciplines. In: Learning Together : Reshaping Higher Education in a Global Age, 2007-07-22 - 2007-07-24.

Hayles, C. S., Horne, R. E., Jensen, D. and Wakefield, R., 2006. An international comparison of housing energy efficiency and performance standards. In: 2nd International Conference of the CRC for Construction Innovation, 2006, 2006-03-12 - 2006-03-14.

Hayles, C. S. and Kooloos, T., 2008. The challenges and opportunities for sustainable building practices. In: Construction in Developing Countries : Procurement, Ethics and Technology Construction in Developing Countries International Symposium, 2008, 2008-01-18 - 2008-01-20.

Hayles, C. S., Robson, S. and Holdsworth, S. E., 2006. A case study from RMIT:introducing property undergraduates to the immediate issues of housing sustainability and affordability with Australia and New Zealand. In: 12th Pacific Rim Real Estate Conference, 2006, 2006-01-22 - 2006-01-25.

Hayles, C. S. and Simister, S., 2000. Value management and the UK's social housing sector. In: RICS COBRA Millenium Conference, 2000-08-31 - 2000-09-01.

Hayles, C. S. and Simister, S., 1999. Value management in the UK's social housing sector. In: Managing Sustainable Values. Hong Kong Institute of Value Management 3rd Conference, 1999-05-06 - 1999-05-07.

Hayles, C. S., de la Harpe, B. and Lombardo, R., 2008. Are we changing students' perceptions of sustainability? In: CIB W89 International COnference in Building Education and Research 2008, 2008-02-10 - 2008-02-15.

Hayles, C. S., de la Harpe, B. and Wakefield, R., 2008. Do graduate skills meet the needs of a greener building industry? In: SB08 The World Sustainable Building Conference, 2008-09-21 - 2008-09-25.

Hayles, C., 2001. Foresight:Repair, refurbishment and re-use of facilities. In: Constructing the Future. London: Department of Trade and Industry.

Hayles, C. and Simister, S., 2000. The Value Workshop:Concise Guidance on the Value Management Workshop. CRC Press. (Building Research Establishment; BRE397)

Hayles, C. S., 2010. An examination of decision making in post disaster housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 1 (1), pp. 103-122.

Heath, A., Walker, P. and Burt, J., 2007. Improving the Bond Strength of Unfired Clay Masonry. In: International Symposium on Earthen Structures., 2007-08-01.

Heath, A. and Walker, P. J., 2013. Structural design for earth buildings. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation. Abingdon, U. K.: CRC Press, pp. 1901-1905.

Heath, A. C. and Darby, A. P., 2005. Differential multiple support excitation: geotechnical and structural considerations. In: First US-Portugal International Workshop: Grand Challenges in Earthquake Engineering, 2005-07-01.

Heath, A., Pestana, J., Bejerano, M. and Harvey, J., 2004. Normalizing behavior of unsaturated granular pavement materials. Journal of Geotechnical and Geoenvironmental Engineering, 130 (9), pp. 896-904.

Heath, A., Roesler, J. and Harvey, J., 2003. Modeling Longitudinal, Corner and Transverse Cracking in Jointed Concrete Pavements. International Journal of Pavement Engineering, 4 (1), pp. 51-58.

Heath, A., Roesler, J. and Harvey, J., 2001. Quantifying Longitudinal, Corner and Transverse Cracking in Jointed Concrete Pavements. In: Transportation Research Board (TRB) Annual Meeting, 2001-01-01.

Heath, A., 2008. A Strain-based Non-linear Elastic Model for Geomaterials. WSEAS Transactions on Applied and Theoretical Mechanics, 3 (6), pp. 197-206.

Heath, A., Darby, A. P. and Bawcombe, J., 2008. Substructure testing for dynamic soil-structure interaction. In: Proceedings of the Second British Geotechnical Association International Conference on Foundations - ICOF 2008, 2008-01-01.

Heath, A., Jones, D. J. and Ballot, S., 1998. Strategic Environmental Assessment in Roads and Transportation Projects. In: International Roads Federation XIIIth World Meeting, 1998-01-01.

Heath, A., Lawrence, M., Walker, P. and Fourie, C., 2009. The compressive strength of modern earth masonry. In: 11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, 2009-09-06 - 2009-09-09.

Heath, A., Paine, K., Goodhew, S., Ramage, M. and Lawrence, M., 2013. The potential for using geopolymer concrete in the UK. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 195-203.

Heath, A., Theyse, H. and Lea, J., 1999. Use of ash in low-volume road construction in South Africa. Transportation Research Record, 1 (1652), pp. 196-202.

Heath, A., Walker, P., Fourie, C. and Lawrence, M., 2009. Compressive strength of extruded unfired clay masonry units. Proceedings of the Institution of Civil Engineers: Construction Materials, 162 (3), pp. 105-112.

Heath, A., Walker, P., Jaquin, P. and Lawrence, M., 2012. Render induced cracking of earth masonry. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 165 (8), pp. 435-442.

Heath, A. C., Lea, J. D., Bergh, A. O. and Hendricks, P., 1997. Testing of Sasol Ash as an Unstabilized Road Base Material. In: 1997 International Ash Utilization Symposium, 1997-10-20 - 1997-10-22.

Heath, A. C., Lea, J. D., Bergh, A. O. and Hendricks, P., 1997. The use of Sasol Ash as a Road Construction Material. In: 1997 International Ash Utilization Symposium, 1997-10-20 - 1997-10-22.

Heath, A. C. and Roesler, J. R., 2000. Top-down cracking of rigid pavements constructed with fast-setting hydraulic cement concrete. Transportation Research Record, 1712, pp. 3-12.

Heaton, M., 2016. Spolia Britannica:The historical use of salvaged building materials in Britain. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Hennessey, R. and Harris, R., 2004. The engineering of the Sheffield Winter Garden. In: 8th International Conference on Timber Engineering, 2004-01-01.

Hennessy, R. and Harris, R., 2004. The Winter Gardens, Sheffield, UK. In: World Conference of Timber Engineering 2004, 2015-04-20.

Henriksen, T., Lo, S. and Knaack, U., 2015. Advances in the application of thin-walled glass fiber reinforced concrete elements. Advances in Civil Engineering Materials, 4 (1).

Henriksen, T., Lo, S. and Knaack, U., 2015. An innovative approach to manufacture thin-walled glass fibre reinforced concrete for tomorrow's architectural buildings envelopes with complex geometries. Journal of Building Engineering, 4, pp. 189-199. Item availability may be restricted.

Henriksen, T., Lo, S. and Ulrich, K., 2016. The impact of a new mould system as part of a novel manufacturing process for complex geometry thin-walled GFRC. Architectural Engineering and Design Management, 12 (3), pp. 231-249.

Herdt, G. and Wilson Jones, M., 2008. Scanning ancient building components. Photogrammetrie - Fernerkundung - Geoinformation (PFG), 4, pp. 245-251.

Herrera, M., Abraham, E. and Stoianov, I., 2016. A graph-theoretic framework for assessing the resilience of sectorised water distribution networks. Water Resources Management, 30 (5), pp. 1685-1699.

Herrera Fernandez, A. M., Eames, M., Ramallo Gonzalez, A., Liu, C. and Coley, D., 2016. Quantile regression ensemble for summer temperatures time series and its impact on built environment studies. In: International Congress on Environmental Modelling and Software, 2016-07-10 - 2016-07-14, École nationale supérieure d'électronique, d'électrotechnique, d'informatique, d'hydraulique et des télécommunications.

Hilden, M., Dankers, R., Kjeldsen, T., Hannaford, J., Kuhlicke, C., Kuusisto, E., Makropoulos, C., te Linde, A., Ludwig, F., Luther, J. and Wolters, H., 2012. Floods - Vulnerability, Risks and Management:A Joint Report of ETC CCA and ICM. ETC CCA. (ETC CCA/ICM Joint Technical Paper; 2/2012)

Hill, T., Shanks, J., Stott, J. and Walker, P., 2007. Testing and analysis of a traditional oak frame. ICE Proceedings Structures & Buildings, SB1, p. 23.

Hinnells, M., Layberry, L., Curtis, D. and Shea, A., 2008. Transforming UK non-residential buildings: achieving a 60% cut in CO2 emissions by 2050. In: IEECB Focus 2008: Improving Energy Efficiency in Commercial Buildings Conference, 2008-04-10 - 2008-04-11.

Hirst, E., Brett, A., Thomson, A., Walker, P. and Harris, R., 2008. The structural performance of traditional oak tension and scarf joints. In: 10th World Conference on Timber Engineering, 2008-06-02 - 2008-06-05.

Hirst, E., Walker, P., Paine, K. and Yates, T., 2010. Characterisation of low density hemp-lime composite building materials under compression loading. In: Second International Conference on Sustainable Construction Materials and Technologies, 2010-06-28 - 2010-06-30.

Hirst, E. A. J., 2013. Characterisation of Hemp-Line as a Composite Building Material. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Hirst, E. A. J., Walker, P., Paine, K. A. and Yates, T., 2012. Characteristics of low density hemp-lime building materials. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (1), pp. 15-23.

Hjort, B., Lindgren, J., Larsson, B. and Emmitt, S., 2014. Success factors related to industrialized building in Sweden. In: CIB International Conference on Construction in a Changing World, 2014, 2014-05-04 - 2014-05-07, Heritance Kandalama.

Hodgson, J. A., Donohue, S., O'Connell, Y., Reid, G., Krahn, H. and Young, M., 2009. A geophysical journey around Ireland. First Break, 27 (8), pp. 35-42.

Hodsdon, T. and Walker, P., 2006. Study of round-wood timber-limecrete composite panels. Structural Engineering International, 16, 245--251.

Holdsworth, S., Bekessey, S., Hayles, C. and Thomas, I., 2006. Beyond leather patches (BELP):sustainability education at RMIT University. In: Leal Filho, W. and Carpenter, D., eds. Sustainability in the Australasian University Context. New York, U. S. A.: Peter Lang, pp. 153-176. (Environmental Education, Communication, and Sustainability; 24)

Holdsworth, S., Bekessey, S., Mnguni, P., Hayles, C. and Thomas, I., 2006. Beyond leather patches (BELP):sustainability education at RMIT University. In: Leal Filho, W. and Carpenter, D., eds. Sustainability in the Australasian University Context. New York, U. S. A.: Peter Lang, pp. 107-128. (Environmental Education, Communication, and Sustainability; 22)

Holley, J., 2009. Sol-gel surface treatment on Adobe brick. In: SIMS XVII - 17th International Conference on Secondary Ion Mass Spectrometry, 2009, 2009-09-14 - 2009-09-18.

Holley, J., Donadeli, E., Milhoranca, C. and Paine, K., 2015. Effect of nanolimestone particles on hydration and flexural strength of Portland limestone cement pastes. In: Concrete Research: Driving Profit and Sustainability, 2015-11-02 - 2015-11-05.

Horne, R. and Hayles, C., 2008. Towards global benchmarking for sustainable homes:An international comparison of the energy performance of housing. Journal of Housing and the Built Environment, 23 (2), pp. 119-130.

Hsu, M. F. and Chang, W. S., 2007. Research efforts being devoted to traditional Chuan-Dou timber structures after Chi-Chi earthquake in Taiwan. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture X. Southampton, UK: WIT Press, pp. 143-152.

Hsu, M. F., Yeo, S. and Chang, W. S., 2010. A preliminary research on the life cycle of historic timber buildings in Taiwan – using ten traditional temples as a case study. In: 60th Annual Meeting of the Japanese Wood Research Society, 2010-03-17 - 2010-03-19.

Hu, J., Du, J. and Place, W., 2011. The assessment of advanced daylighting systems in multi-story office buildings using a dynamic method. In: Moshfegh, B., ed. World Renewable Energy Congress 2011, 2011-05-08 - 2011-05-13. Linkoping, Sweden: Linkoping University, pp. 1867-1874.

Hu, J., Du, J. and Place, W., 2011. The performance evaluation of advanced daylighting systems in multi-story office buildings:measurement and simulation. In: Bodart, M. and Evrard, A., eds. PLEA 2011 - 27th Conference on Passive and Low Energy Architecture, 2011-07-13 - 2011-07-15. Louvain, Belgium: Universitaires de Louvain, pp. 813-817.

Hu, Z. Z., Greaves, D. M. and Wu, G. X., 2002. Numerical simulation of fluid flows using an unstructured finite volume method with adaptive tri-tree grids. International Journal for Numerical Methods in Fluids, 39 (5), pp. 403-440.

Huang, H., Chang, W.-S. and Mosalam, K. M., 2016. Feasibility of shape memory alloy in a tuneable mass damper to reduce excessive in-service vibration. Structural Control and Health Monitoring Item availability may be restricted.

Huang, H., Xie, W. and Chang, W. S., 2015. Materials characterisation of NiTi and CuAIMn shape memory alloy bars under dynamic bending. In: International Conference on Shape Memory and Superelastic Technologies, SMST 2015, 2015-05-18 - 2015-05-22. Ohio, U. S. A.: ASM International, pp. 159-160.

Huang, P., Chang, W.-S., Shea, A., Ansell, M. P. and Lawrence, R. M. H., 2014. Non-homogeneous thermal properties of bamboo. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 657-664. (RILEM Bookseries; 9)

Huang, P., Chang, W.-S., Ansell, M., Chew, J., Shea, A., Zeidler, A. and Pickering, S., 2014. Heat transfer simulation and experimental studies of bamboo in radial direction. In: World Conference on Timber Engineering (WCTE) 2014, 2014-08-10 - 2014-08-14.

Huang, P., Zeidler, A., Chang, W.-S., Ansell, M. P., Chew, Y. M. J. and Shea, A., 2016. Forthcoming. Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry. Construction and Building Materials, 125, pp. 821-831. Item availability may be restricted.

Hubbard, S. B., Kershaw, T. J., Usher, A., Savchenko, A. K. and Shytov, A., 2011. Millikelvin de Haas–van Alphen and magnetotransport studies of graphite. Physical Review B, 83 (3), 035122.

Hudson, R., Shepherd, P. G. and Hines, D., 2011. Aviva Stadium: a case study in integrated parametric design. International Journal of Architectural Computing, 9 (2), pp. 187-204.

Hughes, D., Karim, M. R., Briggs, K., Glendinning, S., Toll, D., Dijkstra, T., Powrie, W. and Dixon, N., 2015. A comparison of numerical modelling techniques to predict the effect of climate on infrastructure slopes. In: Winter, M. G., Smith, D. M., Eldred, P. J. L. and Toll, D. G., eds. 16th European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2015, 2015-09-13 - 2015-09-17. ICE Publishing, pp. 3663-3668.

Hutchins, M. G., McGrane, S., Miller, J., Hagen-Zanker, A., Kjeldsen, T., Dadson, S. and Rowland, C., 2016. Integrated modeling in urban hydrology: reviewing the role of monitoring technology in overcoming the issue of ‘big data’ requirements. WIREs Water

Ibell, T., 2007. Flexible fabric formwork for novel concrete structures. In: Proceedings of Advanced Composites in Construction ACIC07, 2007-01-01.

Ibell, T. and Au, S., 2001. Elasto-plastic behaviour of FRP-prestressed concrete,. In: 5th International Conference on The Use of FRPs in Reinforced Concrete Structures, 2001-01-01.

Ibell, T. and Denton, S., 2007. Recent applications of plasticity theory to shear problems in concrete. In: Invited Proceedings of the Morley Symposium on Plasticity Theory, 2007-01-01.

Ibell, T. and Gale, L., 2003. Anchorage Zones for FRP-Prestressed Concrete. Unkown Publisher.

Ibell, T., Gale, L. and Choi, M. C., 2003. Design of anchorage zones for FRP-prestressed concrete. In: Fibre-reinforced polymer reinforcement for concrete structures FRPRCS6, 2003-01-01.

Ibell, T. J., 2005. Research at the University of Bath into the use of FRP in concrete structures. In: First US-Portugal International Workshop: Grand Challenges in Earthquake Engineering, 2005-07-01.

Ibell, T. J., Darby, A. P. and Bailiss, J., 2007. Fabric-formed concrete beams. Concrete, 41 (1), pp. 28-29.

Ibell, T. J., Darby, A. P. and Bailiss, J. A., 2007. Fabric-formed concrete beams. In: Proceedings of Advanced Composites in Construction 2007 (ACIC07), 2007-04-01.

Ibell, T. J., Darby, A. P. and Denton, S., 2007. The use of FRP to strengthen structures: A UK perspective. In: Proceedings of the Fourth Structural Engineering Mechanics Conference, 2007-09-01.

Ibell, T. J., Darby, A. P. and Denton, S. R., 2008. Application of plasticity theory to existing concrete structures for assessment and strengthening. In: Proceedings of CCC 2008 - Challenges for Civil Construction, 2008-04-16 - 2008-04-18.

Ibell, T. J., Orr, J. J., Kostova, K., Darby, A. P. and Evernden, M., 2013. Extraordinary possibilities for future concrete structures. The IES Journal Part A: Civil & Structural Engineering, 6 (4), pp. 239-248.

Ibell, T. J. and Walker, P. J., 2013. Editorial. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 187-188.

Ibell, T., 2015. Creativity and fun: core strengths. The Structural Engineer, 93 (2), pp. 10-17.

Ibell, T., 2015. Educating the next generation of structural engineers. In: ASCE/SEI Structures Congress, 2015-04-21 - 2015-04-25.

Ibell, T., 1992. Behaviour of anchorage zones for prestressed concrete. Thesis (Doctor of Philosophy (PhD)). University of Cambridge.

Ibell, T., 2010. Learning structural engineering. The Structural Engineer, 88 (8), pp. 17-19.

Ibell, T., 2016. Virtual by design. The Structural Engineer, 94 (3), pp. 88-89.

Ibell, T. and Burgoyne, C., 1994. A generalised lower-bound approach to the analysis of anchorage zones for prestressed concrete. Magazine of Concrete Research, 46 (2), pp. 331-338.

Ibell, T. and Burgoyne, C., 1994. A plasticity analysis of anchorage zones. Magazine of Concrete Research, 46 (1), pp. 39-48.

Ibell, T. and Burgoyne, C., 1993. An experimental investigation of the behaviour of anchorage zones. Magazine of Concrete Research, 45 (6), pp. 281-292.

Ibell, T. and Burgoyne, C., 1992. Behaviour of prestressed concrete end blocks. Cambridge University Engineering Department.

Ibell, T. and Burgoyne, C., 1993. Plastic analysis of anchorage zones for prestressed concrete. In: The FIP Symposium 1993: Prestressing Techniques and their Applications, 1993-10-01.

Ibell, T. and Burgoyne, C., 1998. The Shear Strength of Concrete containing FRP Reinforcement. In: 23rd conference on Our World in Concrete and Structures, 1998-08-01.

Ibell, T. and Burgoyne, C., 1999. The use of FRPs vs steel for shear reinforcement of concrete. ACI Structural Journal, 96 (6), pp. 997-1003.

Ibell, T. and Darby, A., 2009. Fabric formwork for innovative concrete structures. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Ibell, T., Darby, A. and Denton, S. R., 2009. Plane section assumption for FRP-strengthened beams. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), 2009-07-13 - 2009-07-15.

Ibell, T., Darby, A. and Denton, S., 2009. The goal for the FRP industry to be in Quadrant 1: ongoing research to assist in this quest. In: Advanced Composites in Construction (ACIC 2009), 2009-09-01 - 2009-09-03.

Ibell, T., Darby, A., Orr, J. and Evernden, M., 2010. The role of structural fabrics in a sustainable concrete infrastructure. In: International Conference on Sustainable Built Environment (ICSBE-2010), 2010-12-13 - 2010-12-14.

Ibell, T. and Middleton, C., 1995. A generalised collapse analysis method for concrete bridge assessment. In: The IABSE Symposium on Extending the Lifespan of Structures, 1995-01-01.

Ibell, T., Morley, C. and Middleton, C., 1996. A generalised collapse analysis method for concrete bridges. Cambridge University Engineering Department.

Ibell, T., Morley, C. and Middleton, C., 1997. A plasticity approach to the assessment of shear in concrete beam-and-slab bridges. The Structural Engineer, 75 (19), pp. 331-338.

Ibell, T., Morley, C. and Middleton, C., 1996. An experimental investigation into shear in large-scale concrete beam-and-slab structures CUED/D-Struct/TR 165. Cambridge University Engineering Department.

Ibell, T., Morley, C. and Middleton, C., 1998. An upper-bound plastic analysis for shear. Magazine of Concrete Research, 50 (1), pp. 67-73.

Ibell, T., Morley, C. and Middleton, C., 1996. Background to and developments in shear in reinforced concrete members CUED/D-Struct/TR 151. Cambridge University Engineering Department.

Ibell, T., Morley, C. and Middleton, C., 1998. Shear assessment of concrete beam-and-slab bridges. ICE Journal of Structures and Buildings, 128 (3), pp. 264-273.

Ibell, T., Morley, C. and Middleton, C., 1999. Strength and behaviour in shear of concrete beam-and-slab bridges. ACI Structural Journal, 96 (3), pp. 386-391.

Ibell, T., Morley, C. and Middleton, C., 1997. The assessment in shear of existing concrete bridges. In: FIP Symposium 97: The concrete way to development, 1997-03-02.

Ibell, T. J., Darby, A. P. and Denton, S., 2009. Research issues related to the appropriate use of FRP in concrete structures. Construction and Building Materials, 23 (4), pp. 1521-1528.

Ince, C., Carter, M. A., Wilson, M. A., Collier, N. C., El-Turki, A., Ball, R. J. and Allen, G. C., 2011. Factors affecting the water retaining characteristics of lime and cement mortars in the freshly-mixed state. Materials and Structures, 44 (2), pp. 509-516.

Ince, C., Carter, M. A., Wilson, M. A., El-Turki, A., Ball, R. J., Allen, G. C. and Collier, N. C., 2010. Analysis of the abstraction of water from freshly mixed jointing mortars in masonry construction. Materials and Structures/Materiaux et Constructions, 43 (7), pp. 985-992.

Incelli, G., Dodd, N., Blenkinsopp, C. E., Zhu, F. and Briganti, R., 2016. Morphodynamical modelling of field-scale swash events. Coastal Engineering, 115, pp. 42-57.

Ioannou, S., Paine, K. and Quillin, K., 2011. Resistance of supersulfated cement concrete to carbonation and sulfate attack. In: 1st Annual International Conference on Construction, 2011-06-20 - 2011-06-23.

Ioannou, S., Paine, K. and Quillin, K., 2012. Resistance of supersulfated cement concrete to carbonation and sulfate attack. In: Patricios, N. and Alifragkis, S., eds. Construction. Athens, Greece: Athens Institute for Education and Research, pp. 293-305.

Ioannou, S., Paine, K. and Quillin, K., 2010. Strength and durability of calcium sulfoaluminate based concretes. In: International Conference on Non-Conventional Materials and Technologies: Ecological Materials and Technologies for Sustainable Building, 2010-09-21 - 2010-09-23.

Ioannou, S., Reig, L., Paine, K. and Quillin, K., 2014. Properties of a ternary calcium sulfoaluminate-calcium sulfate-fly ash cement. Cement and Concrete Research, 56, pp. 75-83.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Response of FRP wrapped RC columns to impact loads. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Isaac, P., 2014. Effects of Extreme Impulsive Loads on RC Structures with a view to Strengthening. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2013. Influence of loading-rate on the failure mode of reinforced concrete members. Proceedings of the ICE-Engineering and Computational Mechanics, 166 (4), pp. 194-203.

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2011. Plasticity-based approach for evaluating the blast response of RC columns retrofitted with FRP. International Journal of Protective Structures (IJPS), 2 (3), pp. 367-380.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Plasticity based approach to analyse the response of FRP wrapped columns subjected to impact loads. In: Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Jackson, P. and Nevola, F., 2006. Beyond the Palio: urbanism and ritual in Renaissance Siena. Renaissance Studies, 20 (2), pp. 137-146.

Jain, N., Lala, C. R., Chopra, M., Ramallo-González, A. P. and Natarajan, S., 2015. Impacts of uncertainty in energy modelling widely used in aggressive energy efficiency regulations. In: 14th Conference of International Building Performance Simulation Association, BS 2015, 2015-12-07 - 2015-12-09. International Building Performance Simulation Association, pp. 1344-1351.

Jaiswal, K., Wald, D. and D'Ayala, D. F., 2011. Developing empirical collapse fragility functions for global building types. Earthquake Spectra, 27 (3), pp. 775-795.

Jeon, J. Y. and Barron, M., 2005. Evaluation of stage acoustics in Seoul Arts Center Concert Hall by measuring stage support. Journal of the Acoustical Society of America, 117, 232--239.

Jobe, K. and Williams, C. J. .K., 2016. Flexible design and construction strategies for self-help housing in Botswana. The Open Construction and Building Technology Journal, 10 (suppl. 3), pp. 381-394.

Jonas, K., Penn, A. and Shepherd, P., 2014. Designing with Discrete Geometry. In: 19th International Conference on Computer-Aided Architectural Design Research in Asia, 2014-05-14 - 2014-05-16, Japan.

Jones, M. W., 2015. Ancient architecture and mathematics:methodology and the doric temple. In: Williams, K. and Ostwald, M., eds. Architecture and Mathematics from Antiquity to the Future: Volume I: Antiquity to the 1500s. London, U. K.: Birkhäuser, pp. 271-295.

Jorgensen, B. and Emmitt, S., 2007. Integrating design and construction from a lean perspective. In: Proceedings of CIB World Building Congress. .

Jorgensen, B., Emmitt, S. and Ballard, G., 2005. Divergent focus in the application of lean ideas:examples from Denmark and California. In: Proceedings of 13th Annual Conference of the International Group on Lean Construction (IGLC) , 2005. , pp. 395-404.

Jorgensen, B., Emmitt, S. and Bonke, S., 2004. Integrating (lean) design and construction:Paper no. 824. In: Building for the Future, Proceedings of CIB World Building Congress, 2004. Toronto, Canada: National Research Council of Canada.

Jorgensen, B., Emmitt, S. and Bonke, S., 2004. Revealing cultures and sub-cultures during the implementation of lean construction. In: Bertelsen, S. and Formoso, C. T., eds. Proceedings of 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 2004. Lean Construction, pp. 141-153.

Jorgensen, B.,