Research

Items from Faculty of Engineering & Design > Architecture & Civil Engineering

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level: 2350.

Book/s

Scheublin, F., Pronk, A., Prins, M., Emmitt, S. and Otter, A., eds., 2006. Adaptables 2006. Proceedings of International Conference on Adaptability in Design and Construction. Vol. 3. The Netherlands: Eindhoven University Press.

Emmitt, S., Prins, M. and den Otter, A., eds., 2009. Architectural Management : International Research and Practice. Chichester, U. K.: Wiley-Blackwell.

Altun, M. C. and Emmitt, S., eds., 2011. Contradictions and Synergies in Detail Design : Proceedings of Detail Design in Architecture 10, 2011. Istanbul, Turkey: Istanbul Technical University Press.

Emmitt, S. and Prins, M., eds., 2005. Designing Value : New directions in Architectural Management. Denmark: Technical University of Denmark.

Harney, M., ed., 2014. Gardens and Landscapes in Historic Building Conservation. Chichester, U. K.: Wiley-Blackwell.

Emmitt, S., ed., 2012. Lean Design Management. London, U. K.: Routledge.

Emmitt, S., ed., 2012. Lean Design Management. London, U. K.: Routledge.

Porter, R. and Zang, J., eds., 2015. Proceeding of the 30th International Workshop on Water Waves and Floating Bodies, 12-15 April 2015, Bristol, UK. International Workshop on Water Waves and Floating Bodies.

Melhado, S., Prins, M., Emmitt, S., Bouchlaghem, D. and Otter, A., eds., 2008. Proceedings of CIBW096/TG49, 2008 : Design Management in the Architectural Engineering and Construction Sector. Rotterdam, The Netherlands: CIB.

Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds., 2014. Shell Structures for Architecture : Form Finding and Optimization. London, U. K.: Routledge.

Charrington, H. and Nava, V., eds., 2011. Alvar Aalto : The Mark of the Hand. Helsinki, Finland: Rakennustieto Publishing.

Charrington, H., ed., 1998. Alvar Aalto: Kulttuuritalo. The House of Culture. Helsinki: Rakennustieto Oy.

Emmitt, S., ed., 2013. Architectural Technology : Research and Practice. Chichester, U. K.: Wiley-Blackwell.

Anstey, T., Grillner, K. and Hughes, R., eds., 2007. Architecture and Authorship. London, U. K.: Black Dog Publishing.

Jackson, P. and Nevola, F., eds., 2006. Beyond the Palio: Urban Ritual in Renaissance Siena. Oxford: Blackwell Publishing.

Dhir, R. K., Paine, K. A. and Newlands, M. D., eds., 2002. Composite materials in concrete construction. London: Thomas Telford.

Nikolopoulou, M., ed., 2004. Designing Open Spaces in the Urban Environment: a Bioclimatic Approach. Athens: Centre for Renewable Energy Sources, EESD, FP5.

Ledbetter, S., Keiller, A. and Liao, Z., eds., 2007. ICBEST '07 - Proceedings. Bath, UK: Centre for Window and Cladding Technology.

Forsyth, M. and White, L., eds., 2011. Interior finishes & fittings for historic building conservation. Hoboken, U. S. A.: Wiley-Blackwell.

Forsyth, M., ed., 2008. Materials and Skills for Historic Building Conservation. Oxford, U. K.: Blackwell Publishing. (Historic Building Conservation; 1)

Hart, V. and Hicks, P., eds., 1998. Paper Palaces: Rise of the Renaissance Architectural Treatise. London and New Haven: Yale University Press.

Odgers, J., Samuel, F. and Sharr, A., eds., 2006. Primitive: Original Matters in Architecture. London: Routledge.

Dhir, R. K. and Paine, K. A., eds., 1999. Radical design and concrete practices. London: Thomas Telford.

Dhir, R. K., Limbachiya, M. C. and Paine, K. A., eds., 2001. Recycling and reuse of used tyres. London: Thomas Telford.

Dhir, R. K., Paine, K. A. and Tang, M. C., eds., 2005. Role of concrete in nuclear facilities. London: Thomas Telford.

Dhir, R. K., Newlands, M. D. and Paine, K. A., eds., 2003. Role of concrete in sustainable development. London: Thomas Telford.

Charrington, H., ed., 1989. Scroope Journal, Issue 1. Cambridge: University of Cambridge.

Dhir, R. K., Dyer, T. D. and Paine, K. A., eds., 2000. Sustainable construction: Use of incinerator ash. London: Thomas Telford.

Marder, T. A. and Wilson Jones, M., eds., 2015. The Pantheon:From Antiquity to the Present. Cambridge, U. K.: Cambridge University Press.

Forsyth, M., ed., 2007. Understanding Historic Building Conservation. Oxford, U. K.: Blackwell Publishing.

Schofield, R. and Tavernor, R., eds., 2009. Vitruvius, On Architecture. Penguin. (Penguin Classics)

, I. o. S. E., 2007. Manual for the design of timber building structures to Eurocode 5. London: The Institution of Structural Engineers.

Achammer, C., 2011. Architectural Management in the Digital Arena : Proceedings of CIB/W096, 2011. Vienna, Austria: Vienna Technical University.

Bevan, R., Woolley, T., Pritchett, I., Carpenter, R., Walker, P. and Duckett, M., 2008. Hemp Lime Construction: a guide to building with hemp lime composites. London: BRE Press.

Cavaciocchi, P., Lastrico, C., Molinari, A., Pesce, G. and Soppa, S., 2009. Studi sull’antica Chiesa di San Nicolò di Capodimonte a Camogli. Borgo San Dalmazzo, Cuneo: Tipografia Berrone.

Chen, C. J. and Chang, W. S., 2005. Modern Wood Architecture (in Simplified Chinese). Tianjin, China: Tianjin University Press.

Chen, C. J. and Chang, W. S., 2003. Wood Architecture (in Traditional Chinese). Taipei, Taiwan: SinoBook.

Cripps, A., Harris, B. and Ibell, T., 2002. Applications for FRP composites in construction. Vol. 645. January ed. Unkown Publisher. (CIRIA)

Cripps, A., Harris, B. and Ibell, T., 2002. C564 Fibre-reinforced polymer composites in construction. London: CIRIA.

Day, A., 1997. Digital Building. Oxford, U. K.: Butterworth-Heinemann.

Dhir, R. K., McCarthy, M. J. and Paine, K. A., 2002. Use of fly ash to BS EN 450 in structural concrete. Technology Digest 1. Camberley, UK: The Concrete Society. (Technology Digest TD1)

Dhir, R. K., Newlands, M. D., McCarthy, M. J. and Paine, K. A., 2008. Harnessing fibres for concrete construction. Garston: IHS BRE Press.

Emmitt, S., 2002. Architectural Technology. Oxford, U. K.: Blackwell.

Emmitt, S., 2012. Architectural Technology (2nd ed.). Chichester, U. K.: Wiley-Blackwell.

Emmitt, S., 2007. Design Management for Architects. Oxford, U. K.: Blackwell.

Emmitt, S., 2011. Design Management for Architects. China: China Architecture & Building Press.

Emmitt, S., 2014. Design Management for Architects (2nd ed.). Chichester, U. K.: Wiley-Blackwell.

Emmitt, S. and Gorse, C. A., 2006. Barry's Advanced Construction of Buildings. Oxford, U. K.: Blackwell.

Emmitt, S. and Gorse, C. A., 2014. Barry's Advanced Construction of Buildings (3rd ed.). Chichester,U. K.: Wiley-Blackwell.

Emmitt, S. and Gorse, C. A., 2010. Barry's Advanced Construction of Construction of Buildings (2nd ed.). Chichester, U. K.: Wiley-Blackwell.

Emmitt, S. and Gorse, C. A., 2005. Barry's Introduction to Construction of Buildings. OXford, U. K.: Blackwell.

Emmitt, S. and Gorse, C. A., 2010. Barry's Introduction to Construction of Buildings (2nd ed.). Chichester, U. K.: Wiley-Blackwell.

Emmitt, S. and Gorse, C. A., 2014. Barry's Introduction to Construction of Buildings (3rd ed.). Chichester, U. K.: Wiley-Blackwell.

Emmitt, S. and Gorse, C. A., 2006. Communication in Construction Teams. London, U. K.: Routledge. (Spon Research)

Emmitt, S. and Gorse, C. A., 2003. Construction Communication. Oxford, U. K.: Blackwell.

Emmitt, S., Olie, J. and Schmid, P., 2004. Principles of Architectural Detailing. Oxford, U. K.: Blackwell.

Emmitt, S., Olie, J. and Schmid, P., 2006. Principles of Architectural Detailing. China: China Electric Power Press.

Emmitt, S. and Ruikar, K., 2013. Collaborative Design Management. London, U. K.: Routledge.

Emmitt, S. and Yeomans, D. T., 2014. Specifying Buildings : a Design Management Perspective. Oxford, U. K.: Butterworth-Heinemann.

Emmitt, S. and Yeomans, D. T., 2014. Specifying Buildings : a Design Management Perspective. Oxford, U. K.: Butterworth-Heinemann.

Emmitt, S. and Yeomans, D. T., 2008. Specifying Buildings : a Design Management Perspective (2nd ed.). London, U. K.: Routledge.

Fodde, E., 2004. Architetture di Terra in Sardegna: Archeometria e Conservazione. Cagliari, Italy: Aipsa Edizioni.

Forsyth, M., 2007. Structures and Construction in Historic Building Conservation. Oxford, U. K.: Blackwell Publishing. (Historic Building Conservation)

Forsyth, M., 2003. Bath. London, U. K.: Yale University Press. (Pevsner Architectural Guides)

Forsyth, M. and Ertug, A., 2010. Palaces of Music : Opera Houses of Europe. Istanbul, Turkey: Ertug & Kocabiyik.

Forsyth, M., Ousterhaut, R., Kuban, D. and Ertug, A., 2011. Domes : A Journey through European Architectural History. Switzerland: Ertug & Kocabiyik.

Hart, V. and Hicks, P., 2006. Palladio's Rome: a translation of Andrea Palladio's two guidebooks to Rome. London and New Haven: Yale University Press.

Hart, V., 2011. Inigo Jones : The Architect of Kings. London, U. K.: Yale University Press for The Paul Mellon Centre for Studies in British Art.

Hart, V., 2002. Nicholas Hawksmoor: rebuilding ancient wonders. London and New Haven: Yale University Press. (The Paul Mellon Centre for Studies in British Art)

Hart, V., 2008. Sir John Vanbrugh : Storyteller in Stone. London, U. K.: Yale University Press for The Paul Mellon Centre for Studies in British Art.

Hayles, C. S., Gronqvist, M. and Bowles, G., 1997. Value from Construction : A Comprehensive Bibliopgraphy. London, U. K.: CRC Press.

Hayles, C. and Simister, S., 2000. The Value Workshop:Concise Guidance on the Value Management Workshop. Watford: CRC Press. (Building Research Establishment; BRE397)

Hayles, C. and Simister, S., 2000. Value for Social Housing:Concise Guidance for Registered Social Landlords, their Consultants and Contractors. Watford: CRC Press. (Building Research Establiment; BR398)

Keiller, A., Ledbetter, S. and Wilkinson, M., 2005. Glass in buildings-2 incorporating COST C13 glass and interactive facades. Bath: Centre for Window and Cladding Technology.

Keiller, A. P., Ledbetter, S. R., Walker, A. and Wolmuth, W. J., 2005. Guidance on glazing at height. CIRIA.

Leach, N., Turnbull, D. and Williams, C. J. K., 2004. Digital Tectonics. Chichester, UK: Wiley.

Ledbetter, S., Liao, Z. and Metcalfe, D., 2006. The thermal assessment of window assemblies, curtain walling and non-traditional building envelopes. Bath: Centre for Window and Cladding Technology.

Nevola, F., 2007. Siena: Constructing the Renaissance City. London-New Haven: Yale University Press.

Orr, J., 2010. Structural Innovation in Europe. University of Bath.

Proctor, R. W. and Breidbach, O., 2007. Rene Binet : From Nature to Form. English ed. Munich: Prestel.

Proctor, R. W. and Breidbach, O., 2007. Rene Binet : Natur und Kunst. German ed. Munich, Germany: Prestel.

Samuel, F., 2004. Le Corbusier Architect and Feminist. London: Wiley/Academy.

Samuel, F., 2007. Le Corbusier in Detail. Oxford: Architectural Press.

Samuel, F. and Menin, S., 2003. Nature and Space: Aalto and Le Corbusier. London: Routledge.

Syson, L., Angelini, A., Jackson, P. and Nevola, F., 2007. Renaissance Siena: Art for a City. London-New Haven: National Gallery Publications.

Tavernor, R., 2005. Palladio and Palladianism. New York: Thames and Hudson. (World of Art)

Walker, P., Keable, R., Martin, J. and Maniatidis, V., 2005. Rammed earth: design and construction guidelines. IHS BRE.

Wilson Jones, M., 2000. Principles of Roman Architecture. New Haven: Yale University Press.

Book Sections

, 2011. Conservation of the historic interior. In: Forsyth, M., Forsyth, M. and White, L., eds. Interior Finishes & Fittings for Historic Building Conservation. Oxford, UK: Wiley-Blackwell, pp. 1-10.

Adriaenssens, S., Barnes, M. and Williams, C., 1999. A new analytic and numerical basis for the form-finding and analysis of spline and gridshell structures. In: Kumar, B. and Topping, B. H. V., eds. Computing Developments in Civil and Structural Engineering. Edinburgh: Civil-Comp Press, pp. 83-91.

Adriaenssens, S., Barnes, M., Harris, R. and Williams, C., 2014. Dynamic relaxation : design of a strained timber gridshell. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 89-102.

Aish, R., Fisher, A., Joyce, S. and Marsh, A., 2012. Progress towards multi-criteria design optimisation using DesignScript with SMART form, robot structural analysis and Ecotect building performance analysis. In: Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA). San Francisco: ACADIA, pp. 47-56.

Ashley, K., Osmani, M., Emmitt, S. and Mallinson, M., 2011. The conservation of tradition and vernacular construction in developing regions : the current context. In: Proceedings of Detail Design in Architecture 10. , pp. 181-190.

Ashmore, J. P. and Richens, P., 2001. Pano painter - sketching in the round. In: Bury, M., Datta, S., Dawson, A. and Rollo, J., eds. Proceedings of Mathematics and Design 2001. Geelong, Australia: Deakin University, pp. 332-347.

Azzouz, A., Copping, A. and Shepherd, P., 2015. An investigation into Building Information Modelling Assessment Methods (BIM-AMs). In: Sulbaran, T., ed. Proceedings of the 51st ASC Annual International Conference, 2015. .

Ball, R. J. and Allen, G. C., 2013. Hydraulic lime mortars: A study of mechanical properties. In: Barnett, S., ed. 33rd Cement & Concrete Science Conference. Portsmouth: University of Portsmouth.

Barnes, M. and Forster, B., 2004. Design Basis and Safety Criteria (for tensile structures). In: Forster, B. and Mollaert, M., eds. European Design Guide for Tensile Surface Structures. Brussels: Tensinet, pp. 177-189.

Barnes, M., Grundig, L. and Moncreiff, E., 2004. Form-finding, Analysis and Patterning. In: Forster, B. and Mollaert, M., eds. European Design Guide for Tensile Surface Structures. Brussels: Tensinet, p. 205.

Barron, M., 2006. The development of concert hall design: a 111 year experience. In: Institute of Acoustics - Spring Conference Futures in Acoustics 2006: Today's Research - Tomorrow's Careers. Vol. 1. , pp. 1-14.

Barron, M., 2008. Objective assessment of concert hall acoustics. In: Proceedings of the Institute of Acoustics.Vol. 30. , pp. 70-78.

Beadle, K. and Shea, A., 2013. Post-occupancy evaluation of a mixed-use academic office building. In: Hakansson, A., Hojer, M., Howlett, R. J. and Jain, L. C., eds. Sustainability in Energy and Buildings. Berlin: Springer, pp. 501-510. (Smart Innovation, Systems and Technologies; 22)

Bekas, D., Grammatikos, S. A., Kouimtzi, C. and Paipetis, A. S., 2015. Linear and non-linear electrical dependency of carbon nanotube reinforced composites to internal damage. In: Advanced Materials for Demanding Applications. IoP Publishing. (IOP Conference Series: Materials Science and Engineering; 74)

Bekessey, S., Hayles, C. S., Holdsworth, S. E. and Thomas, I., 2006. Framework for education for sustainable development in universities : the beyond leather patches (BELP) project at RMIT. In: Proceedings of the 6th Australasian Conference of Sustainable Tertiary Education, University of Ballarat, 20-22 September 2006. .

Bernal, S. A., Hussein, O. H., Mundra, S., Ball, R., Heath, A. and Provis, J. L., 2014. Alkali-activated binders based on biomass fly ash. In: XIII Encontro da Sociedade Brasileira de Pesquisa em Materiais (SBPMat), Int. > Symposium on Cementitious Materials – ISCM2014, Joao Pessoa, Brazil, September 28 – October 2, 2014. Book of proceedings. .

Bernal, S. A., Mundra, S., Hussein, O. H., Ball, R., Heath, A. and Provis, J. L., 2014. Biomass fly ash as precursor for alkali-activated materials. In: Workshop in Waste Cementation, Sheffield, UK, September 17 2014. Book of proceeding of 34th Annual Conference on Cement and Concrete Science, Sheffield, UK. .

Bernal, S., Ball, R., Hussein, O., Heath, A. and Provis, J., 2014. Paper sludge ash as a precursor for production of alkali-activated materials. In: Proceeding of the Second International Conference on Advances in Chemically-Activated Materials (CAM’2014). Changsha, China: .

Bertelsen, S. and Emmitt, S., 2005. Getting to grips with client complexity. In: Emmitt, S. and Prins, M., eds. Designing Value. Rotterdam, The Netherlands: , pp. 61-68.

Bertelsen, S. and Emmitt, S., 2005. The client as a complex system. In: Proceedings of 13th Annual Conference of the International Group on Lean Construction (IGLC) , 2005. , pp. 73-80.

Bertelsen, S. and Emmitt, S., 2005. The clients as a complex system. In: Boussabaine, A. H. and Lewis, J., eds. Proceedings of the 1st International Conference on Built Environment Complexity (BECON), 2005. , pp. 117-126.

Blenkinsopp, C. and Chaplin, J.R., 2005. Measurements of air/water interfaces in plunging breaking waves. In: Grue, J., ed. 20th International Workshop on Water Waves and Floating Bodies. IWWWFB.

Blenkinsopp, C. and Chaplin, J.R., 2007. Validity of small-scale models involving breaking waves. In: Malenica, S. and Senjanovic, I., eds. Proceedings 22nd International Workshop on Water Waves and Floating Bodies. IWWWFB, pp. 13-16.

Blenkinsopp, C., Turner, I.L., Masselink, G. and Russell, P.E., 2009. Field measurements of net sediment flux from individual swashes on a sandy beach. In: Mizuguchi, M. and Sato, S., eds. Proceedings of Coastal Dynamics 2009: Impacts of Human Activities on Dynamic Coastal Processes. World Scientific.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.R., 2009. Measurements of net cross-shore sediment flux at the timescale of individual swashes. In: 19th Australasian Coastal and Ocean Engineering Conference 2009 and the 12th Australasian Port and Harbour Conference 2009 (COASTS AND PORTS 2009). Curran Associates, pp. 759-767.

Blenkinsopp, C.E., Turner, I.L., Mole, M.A., Garden, L. and Peirson, W.L., 2011. Light detection and ranging (LiDAR) for measurement of coastal processes. In: 20th Australasian Coastal and Ocean Engineering Conference 2011 and the 13th Australasian Port and Harbour Conference 2011, COASTS and PORTS 2011. NY: Curran Associates, pp. 757-762.

Boato, A., Martini, S. and Pesce, G., 2005. La costruzione dei terrazzamenti a secco nel Parco Nazionale delle Cinque Terre (SP) : codificazione di un sapere empirico. In: Mochi, G., ed. Atti del seminario internazionale. Bologna, Italy: Edizioni Moderna.

Brandon, D., Ansell, M. P., Harris, R., Walker, P. and Bregulla, J., 2014. Modelling of non-metallic timber connections at elevated temperatures. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 231-241. (RILEM Bookseries; 9)

Brandon, D. and Leijten, A., 2014. Structural performance and advantages of DVW reinforced moment transmitting timber joints with steel plate connectors and tube fasteners. In: Aicher, S., Reinhardt, H.-W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 255-263. (RILEM Bookseries; 9)

Brandon, G., Day, A. and Warhurst, A., 2000. Making domestic energy use visible. In: Towards a Collaborative Environment Research Agenda. London: Macmillan Press Ltd, pp. 58-74.

Briggs, K., 2010. Charing embankment: climate change impacts on embankment hydrology. In: Ground Engineering Magazine. , pp. 28-31.

Briggs, K., Smethurst, J. and Powrie, W., 2014. Modelling the influence of tree removal on embankment slope hydrology. In: Sassa, K., Canuti, P. and Yin, Y., eds. Landslide Science for a Safer Geoenvironment. Springer, pp. 241-246.

Brookfield, E., Emmitt, S., Hill, R. and Scaysbrook, S., 2004. The architectural technologist's role in linking lean design with lean construction. In: Bertelsen, S. and Formoso, C. T., eds. Proceedings of 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 2004. Lean Construction, pp. 375-387.

Calabria, J., 2004. Avaliacao microestrutural de um tijolo macico queimado. In: Proceedings of the 48th Brazilian Congress on Ceramics, 2004. Brazil: .

Calabria, J., 2003. Nanostructural evolution of structural bricks. In: Proceedings of II Congress of the Brazilian Materials Research Society. Brazil: .

Calabria, J. and Vaconselos, W. L., 2004. Structural evaluation of an adobe from Minas Gerais. In: Pecchio, M., ed. Applied mineralogy: developments in science and technology. International Council for Applied Mineralogy.

Calabria, J. and Vasconselos, W. L., 2004. Geometric description of nanoporous earth bricks. In: Proceedings of the III Congress of the Brazilian Materials Research Society. Brazil: .

Calabria, J., Vasconselos, W. L., Magalhaes, R. S. C. and Ferriera, M., 2004. Chemical leaching in nanoporous structural ceramics. In: Proceedings of Congress of the Brazilian Materials Research Society. Brazil: .

Cano-Lopez, P., Copping, A. and Bullock, K., 2008. Introducing an innovative approach to supporting work-based learning for specialist trade operatives. In: Association of Researchers in Construction Management, ARCOM 2008: Proceedings of the 24th Annual Conference. Vol. 1. , pp. 33-41.

Carfrae, J., De Wilde, P., Goodhew, S., Walker, P. and Littlewood, J., 2008. Totnes eco house: Interaction between design and in-situ monitoring. In: PLEA 2008 - Towards Zero Energy Building: 25th PLEA International Conference on Passive and Low Energy Architecture, Conference Proceedings. .

Cavaciocchi, P., Guastella, R., Lastrico, C., Pesce, G. and Vecchiattini, R., 2008. La chiesa di S.Nicolò di Capodimonte (Camogli - GE) : un approccio multidisciplinare al problema del restauro di un edificio restaurato. In: Biscontin, G. and Driussi, G., eds. Atti del Convegno Internazionale 'Scienza e Beni Culturali. Restarare i restauri. Metodi, compatibilità, cantien. Padova, Italy: Edizioni Arcadia Ricerche.

Chang, W. and Nearchou, N., 2013. Investigation of the potential of hot-pressed wood in all-timber connections. In: Schober, K.-U., ed. Innovative timber composites – improving wood with other materials. , pp. 21-25.

Chang, W. S. and Hsu, M. F., 2003. Modified estimation method of fundamental periods of historic buildings with masonry shear walls in Taiwan. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture VIII. Southampton, UK: WIT Press, pp. 565-574. (International Series on Advances in Architecture)

Chang, W. S., Hsu, M. F. and Chen, W. C., 2005. A novel procedure for evaluating the rotational stiffness of traditional timber joints in Taiwan. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture IX. Southampton, UK: WIT Press, pp. 169-178.

Chang, W.-S., Wakita, T., Kitamori, A., Komatsu, K., Kataoka, Y. and Hsu, M.-F., 2012. Dynamic Properties of a Traditional Complex Bracket Sets in an Oriental Temple. In: World Conference on Timber Engineering 2012, WCTE 2012. Vol. 5. , pp. 460-463.

Charrington, H., 2012. A persuasive topology : Alvar Aalto and the ambience of history. In: Emmons, P., Hendrix, J. and Lomholt, J., eds. The Cultural Role of Architecture: Contemporary and Historical Perspectives. London: Routledge, pp. 102-113.

Charrington, H., 2006. Alvar Aalto and the Primitive Suburb. In: Odgen, J., Samuel, F. and Sharr, A., eds. Primitive: Original Matters in Architecture. London: Routledge, pp. 166-175.

Charrington, H., 2000. Grammar of Estonian Architecture. In: Harm, A. and Maiste, T., eds. Simulacrum City. Tallinn: Eesti Arhitektide Liit, pp. 38-62.

Charrington, H., 1998. Metaphor and forgetting in the city. In: Haapala, A., ed. Metaphor and the City. Helsinki: International Institute of Aesthetics, pp. 62-75.

Charrington, H., 2001. Postscript. In: Kunnapu, V., ed. Ule Punase Joe - Across the Red River. Tallinn Tehnikakorgkool, pp. 234-236.

Charrington, H., 2011. On Designing and Building as a Group. In: Parvin, A., Saxby, D., Cerulli, C. and Schneider, T., eds. A Right to Build: The Next Mass-Housebuilding Industry. University of Sheffield, pp. 91-94.

Charrington, H. and Devereux, M., 2012. Making space for place: from development management to planning. In: Bahar Durmaz, K. B. &, ed. Proceedings of Designing Place: International Urban Design Conference 2012. Nottingham: University of Nottingham Press, pp. 117-129.

Chem, C. J., Hsu, M. F. and Chang, W. S., 2003. In-situ evaluation of timber roof structures of historic buildings. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture VIII. Southampton, UK: WIT Press, pp. 815-824.

Chiang, T., Walker, I. and Natarajan, S., 2012. Presenting Energy Information: Display Design and Preferences. In: The Second Asian Conference on Sustainability, Energy & the Environment. .

Chiang, T., Walker, I. and Natarajan, S., 2011. The user-interface design of energy displays. In: Proceedings - Buildings Don’t Use Energy, People Do? , pp. 77-88.

Coley, D., 2012. Energy efficiency: Alternative routes to mitigation. In: Booth, C., Hammond, F. N., Lamond, J. and Proverbs, D. G., eds. Solutions for Climate Change Challenges in the Built Environment. Chichester: Wiley-Blackwell, pp. 153-162.

Coley, D., Winter, M. and Howard, M., 2011. The question of food miles: Thinking locally. In: Cohen, G. E. and Levin, C. M., eds. Food Storage. Hauppauge, N.Y.: Nova Science.

Coley, D., 2012. Mitigation via renewables. In: Booth, C. A., Hammond, F. N., Lamond, J. E. and Proverbs, D. G., eds. Solutions to Climate Change Challenges in the Built Environment. Oxford, U. K.: Wiley-Blackwell, pp. 303-320.

Coley, D., Winter, M. and Howard, M., 2013. National and international food distribution : do food miles really matter? 499 David Coley, Michael Winter and Mark Howard. In: Tirwari, B. K., Norton, T. and Holden, N. M., eds. Sustainable Food Processing. Chichester, U. K.: Wiley-Blackwell, pp. 499-520.

Copping, A. G., 2002. Chapter 11: Management of Fire Safety. In: Means of Escape from Fire. London, UK: Blackwell Publishing, 247--269.

Costa, S. and Pesce, G., 2009. Condivisione e diffusione dei dati nel settore dei Beni Culturali: Le potenzialità dell’integrazione tra standard, formati aperti e licenze libere. In: Cignoni, P., Palombini, A. and Pescarin, S., eds. Atti del IV workshop nazionale Open Source, Free Software e Open Format nei processi di ricerca archeologica. Rome, Italy 27-28 April 2009. Florence: All’Insegna del Giglio.

Costa, S., Pesce, G. and Bianconi, L., 2009. Il progetto IOSA cinque anni dopo: cambiamenti di prospettiva e indirizzi per il futuro. In: Cignoni, P., Palombini, A. and Pescarin, S., eds. Atti del IV workshop nazionale Open Source, Free Software e Open Format nei processi di ricerca archeologica. Rome, Italy 27-28 April 2009. Florence: All’Insegna del Giglio.

Costa, S., Bianconi, L. and Pesce, G. L. A., 2013. Open Source in archaeology : beyond passive users. In: Contreras, F., Farjas, M. and Melero, F. J., eds. CAA2010 Fusion of Cultures. Proceedings of the 38th Annual Conference on Computer Applications and Quantitative Methods in Arhcaeology. Granada, Spain, April 2010. Oxford, U. K.: Archaeopress, pp. 443-448. (British Archaeology Reports (BAR) International Series; 2494)

Cruise, R. B., 2005. The Dry Stone Waller. In: Lim, C. J., ed. Devices: A Manual of Architectural + Spatial Machines. Architectural Press, pp. 188-193.

Cruise, R. B., 2007. The methodology of construction: the gentleman's tailor and the home sewer. In: Lloyd Thomas, K., ed. Material Matters: Architecture and Material Practice. London: Routledge, pp. 163-174.

Cruise, R. B. and Ayres, P., 2004. Making a wall: The development of software to simulate the decisions made and physical fabrication of a dry stone wall. In: Gero, J. S., ed. Design Computing and Cognition '04. Dordrecht: Kluwer Academic Publishers, pp. 275-293.

Cruise, R. B. and Gardner, L., 2008. Harnessing strength enhancements due to cold-forming of stainless steel sections. In: Mahendran, M., ed. Proceedings of the Fifth International Conference on Thin-Walled Structures: Recent innovations and developments. Vol. 2. Queensland University of Technology, pp. 915-922.

Cruise, R. B. and Gardner, L., 2007. Material Stratification in cold-formed stainless steel structural members. In: Beale, R. G., ed. Proceedings of the 6th International Conference on Steel and Aluminium Structures. Oxford: Oxford Brookes University Press, pp. 1050-1057.

Cruise, R. B. and Gardner, L., 2006. The effect of production route on the behaviour of stainless steel structural members. In: Camotim, D., Silvestre, N. and Dinis, P. B., eds. Proceedings of the International Colloquium on Stability and Ductility of Steel Structures. Lisbon, Portugal:: IST Press, pp. 773-780.

D'Ayala, D. F., 2007. Numerical Modelling of masonry structures. In: Forsyth, M., ed. Structures and Construction in Historic Building Conservation. Oxford: Blackwell.

D'Ayala, D. F., Copping, A. G. and Wang, H., 2006. A conceptual model for Multihazard assessment of the vulnerability of historic buildings. In: Lourenco, P. B., Roca, P., Modena, C. and Agrawal, S., eds. Structural Analysis of Historical Constructions : Possibilities of Numerical and Experimental Techniques. Proceedings of the Fifth International Conference. Vol. 1. New Delhi: MacMillan India, pp. 121-140.

D'Ayala, D. F. and Forsyth, M., 2007. What is conservation engineering? In: Forsyth, M., ed. Structures and Construction in Historic Building Conservation. Oxford: Blackwell.

D'Ayala, D., 1999. Correlation of seismic damage between classes of buildings: churches and houses. In: Bernardini, A., ed. Seismic damage to masonry buildings: proceedings of the International Workshop on Measures of Seismic Damage to Masonry Buildings. Taylor & Francis, pp. 41-58.

D'Ayala, D., 1998. Numerical modelling of masonry structures reinforced or repaired. In: Pande, G. N., Middleton, J. and Kralj, B., eds. Computer methods in structural masonry-4: proceedings of the Fourth International Symposium on Computer Methods in Structural Masonry. London: Taylor & Francis, pp. 161-168.

D'Ayala, D., Shi, Y. and Stammers, C. W., 2008. Dynamic multibody behaviour of Historic masonry building models. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom. Vol. 1. London: Taylor & Francis, pp. 489-496.

D'Ayala, D. and Tomasoni, E., 2008. Structural Behaviour of Masonry Vaults: Limit State Analysis with Finite Friction. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom. Vol. 1. London: Taylor & Francis, pp. 47-61.

D'Ayala, D. and Tsai, P., 2008. Evaluation of Historic Dieh-Dou Buildings in Taiwan. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom. Vol. 1. London: Taylor & Francis, pp. 331-338.

Dalziel, S. B., Patterson, M. D., Caulfield, C. P. and Le Brun, S., 2011. Lee waves : new understanding of a classical problem. In: Cenedese, A., Espa, S. and Purini, R., eds. Proceedings of VII International Symposium on Stratified Flows, 2011. , p. 1162.

Darby, A., Coonan, R., Ibell, T. and Evernden, M., 2011. FRP confined square and rectangular columns under concentric and eccentric loading. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 264-276.

Davies, P. J., Emmitt, S., Firth, S. K. and Kerr, D., 2013. Addressing embodied energy from a contractor's perspective. In: SB13 Sustainable Building Conference Proceedings, 2013. Coventry, U. K.: Coventry University.

Day, A., 2005. A digital model of a heritage city: the Bath Experience. In: Insights of Digital Cities. Taipei: Archidata, pp. 57-74.

Day, A. and Gorst, T., 2000. Using Computers to Enhance Public Participation in Urban Design. In: Digital Environments: Design, Heritage and Architecture. Vol. 2. London: Computers and the History of Art.

De Caso y Basalo, F.J., Nanni, A. and Ibell, T., 2011. ICE methodology for FRP characterisation. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 289-298.

Dhir, R. K., Paine, K. A., de Brito, J. M. C. L., Etxeberria, M., Ho, N. Y., Poon, C. S. and Tam, V. W. Y., 2011. Use of recycled and secondary aggregates in concrete: an overview. In: Dhir, R. K. and Newlands, M. D., eds. New Developments in Concrete Construction. Mumbai: Shroff Publishers and Distributors, pp. 157-182.

Dimitriadou, E. and Shea, A., 2012. Experimental Assessment and Thermal Characterization of ETFE Foil. In: ATINER's Conference Paper Series. Athens Institute for Education and Research. (ATINER CONFERENCE PAPER SERIES; CON2012-0145)

Donohue, S., Long, M., Gavin, K. and O'Connor, P., 2004. The use of multichannel analysis of surface waves in determining Gmax for soft clay. In: VianaDaFonsea, A. and Mayne, P. W., eds. Geotechnical and Geophysical Site Characterization Vols 1 and 2. Rotterdam, Netherlands: Millpress Science Publishers, pp. 459-466.

Du, J., 2014. Window systems and energy performance in one-family houses : size and shading effects. In: Malki-Epsthein, L., Spataru, C., Halburd, L. and Mumovic, D., eds. Proceedings of Building Simulation and Optimization, 2014. London, U. K.: The Bartlett, UCL Faculty of the Built Environment, pp. 209-216.

Du, J., 2013. Advanced daylight systems and lighting performance in office building : a case in high latitudes. In: Proceedings of the 12th European Lighting Conference LuxEuropa2013. Poland: Jagiellonian University, pp. 271-276.

Du, J., Hellström, B. and Dubois, M., 2013. A preliminary study of lighting energy performance in houses with various window systems. In: Proceedings of the 7th International Conference on Energy Efficiency in Domestic Appliances and Lighting (EEDAL) 2013. Brussels, Belgium: Joint Research Centre, European Commission, pp. 1-11.

Du, J., Hellström, B. and Dubois, M., 2013. Assessing the impact of window systems on energy performance in houses : an integrated analysis. In: Proceedings of the 12th European Lighting Conference LuxEuropa2013. Poland: Jagiellonian University, pp. 259-264.

Du, J. and Sharples, S., 2010. An analysis of vertical daylight level distributions across the walls of atria. In: Proceedings of CIE 2010. Vienna, Austria: CIE Central Bureau, pp. 646-652.

Du, J. and Sharples, S., 2010. Atrium daylighting : daylight levels on the wall and daylight levels in the adjoining spaces. In: CIE 2010. Vienna, Austria: CIE Central Bureau, pp. 653-660.

Du, J. and Sharples, S., 2009. Computational simulations for predicting vertical daylight levels in atrium buildings. In: Proceedings of the 11th International Building Performance Simulation Association (IBPSA) Conference (Building Simulation 2009). Strathclyde, U. K.: University of Strathclyde, pp. 272-279.

Du, J. and Sharples, S., 2011. Daylight performance assessment and design strategies in the adjoining spaces of atrium buildings. In: Bodart, M. and Evrard, A., eds. Proceedings of PLEA 2011- 27th Conference on Passive and Low Energy Architecture. Louvain, Belgium: Universitaires de Louvain, pp. 765-770.

Du, J. and Sharples, S., 2009. Daylight prediction in atrium buildings : measurement, theoretical analysis and simulation. In: Proceedings of the Passive and Low Energy Architecture (PLEA) 2009 Conference "Architecture Energy and the Occupant's Perspective". Quebec, Canada: Les Presses de l'Universite Laval, pp. 436-441.

Du, J., Sharples, S. and Johnson, N., 2011. A model study of the daylight and energy performance of rooms adjoining an atrium well. In: Moshfegh, B., ed. Proceedings of World Renewable Energy Congress 2011. Linkoping, Sweden: Linkoping University, pp. 1906-1913.

Du, J. and Zhang, X., 2014. The Impact of Overhang on the Risk of Light Trespass in a Fully Glazed Office Building. In: 1st International Conference on Sustainable Lighting and Light Pollution. , pp. 51-58.

Du, Q., Ledbetter, S. and Yang, R., 2012. Web-based information system for cladding industry. In: Frontiers of Manufacturing and Design Science II. Vol. 121-126. Trans Tech Publications, pp. 4265-4268. (Applied Mechanics and Materials)

Dubois, M. and Du, J., 2012. Landscape offices at high latitude : daylight autonomy and electric lighting savings in relation to key design features. In: Proceedings of Improving Energy Efficiency in Commercial Building Conference (IEECB'12). Brussels, Belgium: Joint Research Centre, European Commission, pp. 358-369.

Egbu, C. C., Gorse, C. and Emmitt, S., 2000. Knowledge management for sustainable construction in SME's. In: Sustainable Product Information, Proceedings of UICB/W102, 2000. .

El Reifi, M. H. and Emmitt, S., 2011. Lean design management : exploring perceptions and practice. In: Otter, A., , S. E. and Achammer, C., eds. Architectural Management in the Digital Arena, Proceedings of CIB W096, 2011. Eindhoven, The Netherlands: Eindhoven University Press, p. 1105.

El Reifi, M. H., Emmitt, S. and Ruikar, K., 2013. Developing a conceptual lean briefing process model for lean design management. In: Proceedings of 21st Summit of the International Group for Lean Construction (IGLC), 2013. Brazil: .

El Reifi, M., Emmitt, S. and Ruikar, K., 2014. Exploring the lean briefing process for effective design management. In: Proceedings of IGLC 22 (Norway). , pp. 413-424.

Emmitt, S., 2002. 'Extreme sustainability - some reflections'. In: Erkelens, P. A. and de Jonge, S., eds. Beyond Sustainable Building. Eindhoven, The Netherlands: Eindhoven Technical University, pp. 67-69.

Emmitt, S., 2002. 'Extreme sustainability - some reflections'. In: Erkelens, P. A. and de Jonge, S., eds. Beyond Sustainable Building. Eindhoven, The Netherlands: Eindhoven University Press, pp. 67-69.

Emmitt, S., 2000. Changing the habits of a lifetime? A critical perspective on sustainable building. In: Erkelens, P. A., de Jonge, S. and van Vliet, A. A., eds. Beyond Sustainability. Eindhoven, The Netherlands: Eindhoven University Press.

Emmitt, S., 2009. Creative architectural detailing : learning to push the boundaries. In: Emmitt, S. and Littlewood, J., eds. Proceedings of Detail Design in Architecture 8 (DDiA8), 2009. .

Emmitt, S., 2009. Managing design effort in architectural offices. In: Emmitt, S., Prins, M. and den Otter, A., eds. Architectural Management. Oxford, U. K.: Wiley-Blackwell, pp. 271-283.

Emmitt, S., 2007. On the ongoing importance of architectural management. In: 9607 En Verder ADMS. Eindhoven, The Netherlands: Eindhoven University Press, pp. 15-16.

Emmitt, S., 2013. Research processes and practicalities. In: Emmitt, S., ed. Architectural Technology. Chichester, U. K.: Wiley-Blackwell, pp. 231-246.

Emmitt, S., 2006. Researching a value-based approach to design and construction. In: Aouad, G., Kagioglu, M., Harris, K., de Ridder, H. A. J., Vrijhoef, R. and van den Broek, C., eds. Proceedings of 3rd International Salford Centre for Research and Innovation (SCRI) Symposium, 2006. Salford, U. K.: University of Salford, pp. 65-77.

Emmitt, S., 2001. Selling to specifiers : empathy and heterophily in the supply chain. In: Academic Proceedings of 2nd International Construction Marketing Conference, CIB-W65, 2001. , pp. 114-121.

Emmitt, S., 2011. Stretching the tradition : rediscovering the art of architectural detailing. In: Proceedings of Detail Design in Architecture 10. , pp. 3-11.

Emmitt, S., 2001. The architectural technologist : a timely innovation. In: Anumba, C. J., Egbu, C. and Thorpe, A., eds. Perspectives on Innovation in Architecture, Engineering and Construction, 2001. Loughborough, U. K.: Loughborough University, pp. 601-611.

Emmitt, S., 1997. The diffusion of environmentally responsible ideas and practices. In: Gray, M., ed. Evolving Environmental Ideas. Stockholm, Sweden: Royal Institute of Technology, Stockholm, pp. 41-49.

Emmitt, S., 1997. The diffusion of environmentally responsible ideas and practices. In: Gray, M., ed. Evolving Environmental Ideas. Stockholm, Sweden: Royal Institute of Technology, Stockholm, pp. 41-49.

Emmitt, S. and Christoffersen, A. K., 2009. Collaboration and communication in the design chain : a value-based approach. In: O'Brien, W. J., Formoso, C. T., Ruben, V. and London, K. A., eds. Construction Supply Chain Management Handbook. Boca Raton, U. S. A.: CRC Press, 5.1-5.17.

Emmitt, S. and Christoffersen, A. K., 2009. Exploring the value universe : a values-based approach to design management. In: Emmitt, S., Prins, M. and den Otter, A., eds. Architectural Management. Oxford, U. K.: Wiley-Blackwell, pp. 34-52.

Emmitt, S., Christoffersen, A. K. and Sander, D., 2004. Design management : a value based approach. In: Khosrowshahi, F., ed. Proceedings 20th Annual ARCOM Conference, 2004. Vol. 1. Reading, U. K.: Association of Researchers in Construction Management (ARCOM), pp. 174-184.

Emmitt, S., Christoffersen, A. K. and Sander, D., 2005. Implementing a value based approach to construction. In: Emmitt, S. and Prins, D., eds. Designing Value. Lyngby, Denmark: Technical University of Denmark, pp. 19-28.

Emmitt, S. and Heaton, B., 2003. The introduction of approved document L : a study of enforced change. In: Greenwood, D. J., ed. Proceedings 19th Annual ARCOM Conference, 2003. Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 83-89.

Emmitt, S. and Johnson, M., 2004. Observing designers : disparate values and the realization of design intent. In: Building for the Future, Proceedings of CIB World Building Congress, 2004. Ottawa, Canada: National Research Council of Canada.

Emmitt, S., Pasquire, C. and Mertia, B., 2011. Addressing the architect/contractor interface : a lean design management perspective. In: Otter, A., Emmitt, S. and Achammer, C., eds. Architectural Management in the Digital Arena, Proceedings of CIB W-096, 2011. Eindhoven, Netherlands: Eindhoven University Press, pp. 110-119.

Emmitt, S., Sander, D. and Christoffersen, A. K., 2004. Implementing value through lean design. In: Bertelsen, S. and Formoso, C. T., eds. Proceedings of 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 2004. Lean Construction, pp. 361-374.

Emmitt, S., Sander, D. and Christoffersen, A. K., 2005. The value universe : defining a value-based approach to lean construction. In: Proceedings of 13th Annual Conference of the International Group on Lean Construction (IGLC) , 2005. , pp. 57-64.

Emmitt, S. and West, B., 2003. Incorporating research into an undergraduate module : learning to detail from first (ecologically sound) principles. In: Proceedings 19th Annual ARCOM Conference, 2003. Vol. 2. Association of Researchers in Construction Management (ARCOM), pp. 605-612.

Emmitt, S. and Wyatt, D., 2000. Worlds within worlds : networking towards ecological building. In: Sustainable Product Information, Proceedings of UICB/W102, 2000. .

Emmitt, S. and den Otter, A., 2007. Managing design with the effective use of communication media. In: Proceedings of CIB World Building Congress. .

Emmitt, S., 2006. Facilitating a value-based approach to design and construction through informal leadership : reflections on a Danish approach. In: Songer, A., Chinowsky, P. and Carrillo, P., eds. American Society of Civil Engineers (ASCE) Proceedings of the 2nd Specialty Conference on Leadership and Management in Construction, 2006. Louisville, U. S. A.: P. M. Publishing, pp. 274-281.

Evernden, M., Mottram, J. and Delhees, P., 2004. Characterisation of Uni-strut connectors for pultruded fibre reinforced plastic channels. In: Proceedings 1st International Conference on Innovative Materials and Technologies for Construction and Restoration (IMTCR04). Vol. 1. Leece, Italy: Liguori Editore, pp. 620-632.

Evernden, M. and Pelly, R., 2009. Single bolt tension joints in pultruded PFRP leg angle connections. In: Advanced Composites in Construction 2009, ACIC 2009 - Proceedings of the 4th International Conference. , pp. 473-482.

Evernden, M. and Smith, J., 2011. Concentric and eccentric compression tests on PFRP equal angles. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 406-417.

Fodde, E., 2003. An Approach to Archaeological Sites in Central Asia: the Conservation of Otrar Tobe, Kazakhstan. Selection and Evaluation of Repair Material. In: Terra 2003, 9th International Conference on the Study and Conservation of Earthen Architecture, 29 November – 2 December, 2003 , Yazd, Iran. , pp. 170-183.

Fodde, E., 2005. Field and Laboratory Assessment of Mud Mortars of the Later Mosque and Palace Area, Otrar Tobe, Kazakhstan. In: Conservation and Management of Archaeological and Earthen Structures and Sites in Otrar/Turkestan. Almaty: UNESCO - University of Aachen, pp. 55-64.

Fodde, E., 2002. Lavorazione e Finitura Tradizionale della Pietra di Serrenti: Tecniche e Saperi Artigianali. In: Bellu, A. and Atzeni, A., eds. Architetture in Pietra: materiali e architetture tra innovazione e tradizione. Serrenti: Comune di Serrenti, pp. 15-20.

Fodde, E., 2005. Sardinia's Vernacular Earthen Architecture. In: Petzet, M., ed. ICOMOS World Report on Monuments and Sites in Danger, 2004-2005. Munich: KG Saur Publishing, pp. 134-136.

Fodde, E., 2001. Surveying Craftsmen and Conservators through a Questionnaire. In: Burman, P. and Fodde, E., eds. This Common Bond - Training Cathedral Craftsmen and Conservators for the Next Generation. York: University of York, pp. 23-32.

Fodde, E., 1999. Conservation of Mud and Stud Architecture in Lincolnshire. In: Achenza, M. and Sanna, A., eds. Abitare la Terra. Cagliari, Italy: Cuec Editrice, pp. 152-153.

Fodde, E., 2000. Decorative Interior Features of Twentieth-century Ladiri Buildings of Campidano and their Traditional Conservation Methods. In: Sterry, N., ed. Terra 2000 - 8th International Conference on the Study and Conservation of Earthen Architecture. London: James and James, pp. 125-131.

Fodde, E., 2008. Structural Faults in Earthen Archaeological Sites in Central Asia: Analysis and Repair Methods. In: D'Ayala, D. F. and Fodde, E., eds. Proceedings of the 6th International Conference on Structural Analysis of Historic Construction. Vol. 2. Taylor & Francis, pp. 1415-1422.

Fodde, E., Watanabe, K. and Fujii, Y., 2011. Conservation and Documentation of the Buddhist Monastery of Ajina Tepa, Tajikistan: Heritage of the Silk Roads. In: Rainer, L., Bass Rivera, A. and Gandreau, D., eds. Terra 2008: 10th International Conference on the Study and Conservation of Earthen Architecture, 1-5 February, 2008, Bamako, Mali. , pp. 171-176.

Forsyth, M. G. D., 2001. The nineteenth century suburban villa. In: Looking Forwards. Cottbus, Germany: Brandenburgische Technische Universitat.

Forsyth, M., 2009. Concert Halls. In: Goode, P., ed. The Oxford Companion to Architecture. Vol. 1. Oxford: Oxford University Press, pp. 201-203.

Forsyth, M., 1998. Edward Davis : nineteenth century Bath architect and pupil of Sir John Soane. In: Buchanan, B. B., ed. Bath History. Bath, U. K.: Millstream Books, pp. 107-128.

Forsyth, M., 1997. Il rapporto tra musica e architettura nei teatri storici. In: Teatri Storici. Fiesole, Italy: Nardini Editore, pp. 115-129.

Forsyth, M., 2009. Opera houses. In: Goode, P., ed. The Oxford Companion to Architecture. Oxford, U. K.: Oxford University Press, pp. 670-674.

Fossati, S., Pesce, G. and Decri, A., 2011. Provenance study of wood found in archaeological and architectural objects. In: Turbanti-Memmi, I., ed. Proceedings of the 37th International Symposium on Archaeometry. Siena, Italy 12-16 May 2008. Berlin: Springer, pp. 405-409.

Gai, X., Darby, A., Ibell, T. and Evernden, M., 2011. Experimental investigation of a novel FRP-concrete composite floor slab. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 192-203.

Gai, X., Darby, A., Ibell, T., Evernden, M. and Matthews, S., 2009. FRP stay-in-place participating formwork: design considerations and preliminary testing. In: Advanced Composites in Construction 2009, ACIC 2009. , pp. 376-387.

Gao, F. and Zang, J., 2014. Numerical simulations of breaking waves at vertical wall. In: Proceedings of the 11th (2014) Pacific/Asia Offshore Mechanics Symposium, PACOMS 2014. International Society of Offshore and Polar Engineers, pp. 230-234.

Garbarino, G. B., Lassa, S., Delmonte, A. and Pesce, G. L., 2012. A proposito di insediamenti e castelli nella Langa tra le due Bormide. In: Garbarino, G. B. and Morresi, M., eds. Una chiesa bramantesca a Roccaverano. S. Maria Annunziata (1509-2009). Roccaverano, Italy 29-30 May 2009. Acqui Terme, Italy: Impressioni Grafiche.

Gardner, L. and Cruise, R. B., 2007. Residual stresses in structural stainless steel members. In: Beale, R. G., ed. Proceedings of the 6th International Conference on Steel and Aluminium Structures. Oxford: Oxford Brookes University Press, pp. 1058-1065.

Garvin, S. L., Ridal, J. P. and Hayles, C. S., 2002. The use of waste materials in aggregate concrete blocks. In: Dhir, R. K., McCarthy, M. J. and Newlands, M. D., eds. Concrete for Extreme Conditions. London: Thomas Telford, pp. 393-401.

Gates, P., Ibell, T., Darby, A. and Evernden, M., 2013. Polymeric facades:fatigue performance of pultruded panel connections. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013. Abingdon, U. K.: CRC Press, pp. 625-629.

Gates, P., Ibell, T., Darby, A., Evernden, M., Lo, S. N. G. and Kragh, M., 2012. Polymeric facades: advanced composites for retrofit. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. Proceedings of the 6th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VI 2012), Kingston, Ontario, Canada, 22-25 May 2011. Canadian Society for Civil Engineering (CSCE), pp. 101-108.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2013. A case study investigation into the use of computer generated visualizations to assist with construction delay claims. In: Kajewski, S., Manley, K. and Hampton, K., eds. Proceedings of the 19th International CIB World Building Congress, 2013. Brisbane, Australia: Queensland University of Technology.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2012. An investigation into whether building information modeling (BIM) can assist with construction delay claims. In: Greenwood, D., ed. First UK Academic Conference on Building Information Modelling. Northumbria, U. K.: , pp. 36-44.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2000. A critical examination of research methodologies for studying human communication in the construction industry. In: Akintoye, A., ed. Proceedings of 16th ARCOM Conference, 2000. Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 31-37.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2000. Interaction analysis during design team meetings. In: Akintoye, A., ed. Proceedings 16th Annual ARCOM Conference, 2000. Vol. 2. Association of Researchers in Construction Management (ARCOM), pp. 763-769.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2002. Interaction characteristics of successful contractors' representatives'. In: Greenwood, D., ed. Proceedings of 18th Annual ARCOM Conference, 2002. .

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2001. Interaction process analysis : a methodology for researching construction communication. In: Emmitt, S., ed. Detailing Design - Towards a Joined-Up Industry. , pp. 41-49.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2001. Models of group and interpersonal interaction during management and design team meetings. In: Emmitt, S., ed. Detailing Design - Towards a Joined-Up Industry. , pp. 50-59.

Gorse, C., Emmitt, S., Lowis, M. and Howarth, A., 2001. Project performance and management and design team communication. In: Akintoye, A., ed. Proceedings of ARCOM 17th Annual Conference, 2001. Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 705-712.

Gorse, C. A. and Emmitt, S., 2005. Group interaction research methods. In: Khosrowshahi, F., ed. Proceedings of 21st Annual Conference ARCOM, 2005. Vol. 1. Association of Researchers in Construction Management (ARCOM), pp. 13-22.

Gorse, C. A. and Emmitt, S., 2004. Management and design teamcommunication : responding to change. In: Proceedings of COBRA Annual Conference, RICS, 2004. .

Gorse, C. A. and Emmitt, S., 2005. Small group interaction research methods. In: Emmitt, S. and Prins, M., eds. Designing Value. Rotterdam, The Netherlands: , pp. 103-113.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2015. Service and maintenance damage assessment of composite structures using various modes of infrared thermography. In: Advanced Materials for Demanding Applications. IoP Publishing. (IOP Conference Series : Materials Science and Engineering; 74)

Green, E., Barron, M. and Thompson, D., 2011. The effect of scattering surfaces in rectangular concert halls:A scale model analysis. In: 8th International Conference on Auditorium Acoustics 2011, Proceedings of the Institute of Acoustics.Vol. 33. , pp. 83-92.

Grist, E., Paine, K., Heath, A. and Pinder, H., 2013. An Investigation into the Viability and Benefits of Modern Hydraulic Lime Concretes. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction. New Delhi: Excel India Publishers, pp. 967-981.

Gross, C., Fovargue, J., Homer, P., Mander, T., Walker, P. and White, C., 2009. Lateral Stability of Prefabricated Straw Bale Housing. In: Sustainability in Energy and Buildings. Berlin: Springer, pp. 147-154.

Grusova, M., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Shear transfer in CFRP strengthened reinforced concrete. In: Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings. , pp. 43-54.

Hall, J., Arheimer, B., Aronica, G. T., Bilibashi, A., Bohac, M., Bonacci, O., Borga, M., Burlando, P., Castellarin, A., Chirico, G. B., Claps, P., Fiala, K., Gaal, L., Gorbachova, L., Gul, A., Hannaford, J., Kiss, A., Kjeldsen, T., Kohnova, S., Koskela, J. J., Macdonald, N., Mavrova-Guirguinova, M., Ledvinka, O., Mediero, L., Merz, B., Merz, R., Molnar, P., Montanari, A., Osuch, M., Parajka, J., Perdigao, R. A. P., Radevski, I., Renard, B., Rogger, M., Salinas, J. L., Sauquet, E., Sraj, M., Szolgay, J., Viglione, A., Volpi, E., Wilson, D., Zaimi, K. and Bloschl, G., 2015. A European Flood Database: facilitating comprehensive flood research beyond administrative boundaries. In: Proceedings of the International Association of Hydrological Sciences.Vol. 370. , pp. 89-95.

Harding, J. and Derix, C., 2011. Associative spatial networks in architectural design: Artificial cognition of space using neural networks with spectral graph theory. In: Design Computing and Cognition '10. New York: Springer, pp. 305-323. (Design Computing and Cognition '10)

Harney, M., 2014. Conservation in Action: Monticello. In: Harney, M., ed. Gardens and Landscapes in Historic Building Conservation. Chichester: Wiley-Blackwell, pp. 413-420.

Harney, M., 2015. Conservation in Action: Strawberry Hill, Twickenham. In: Harney, M., ed. Gardens and Landscapes in Historic Building Conservation. Chichester, UK: Wiley-Blackwell, pp. 357-370.

Harney, M., 2014. Introduction: Gardens and Landscapes in Historic Building Conservation. In: Harney, M., ed. Gardens and Landscapes in Historic Building Conservation. Chichester, U. K: Wiley-Blackwell, xv-.xxiii..

Harney, M. and Forsyth, M., 2014. The State Hermitage Museum and its Architecture. In: The Hermitage. Germany: Ertug & Kocabiyik, pp. 19-23.

Harris, R. and Ledbetter, S., 1997. Joint sealing and air infiltration through cladding in tall buildings. In: Clarke, J. N., Tolloczko, J. and Viswanath, H. R., eds. Multi-purpose High-rise Towers and Tall Buildings. London: E & FN Spon, pp. 131-142.

Harry, M., Zhang, H., Lemckert, C., Colleter, G. and Blenkinsopp, C., 2011. Remote sensing of water waves: wave flume experiments on regular and irregular waves. In: 20th Australasian Coastal and Ocean Engineering Conference 2011 and the 13th Australasian Port and Harbour Conference 2011 (COASTS AND PORTS 2011). Curran Associates, pp. 138-143.

Hart, V., 2003. 'Of little or even no importance to the architect': on absent ideals in Serlio's drawings in the Sixth Book, on domestic architecture. In: Palmer, R. and Frangenberg, T., eds. The Rise of the Image: Essays on the History of the Illustrated Art Book. Aldershot: Ashgate, pp. 87-104.

Hart, V., 2002. On Inigo Jones and the Stuart Legal Body. In: Tavernor, R., ed. Body and Building. Essays on the Changing Relation of Body and Architecture. Cambridge, Mass.: MIT Press, pp. 138-149.

Hart, V., 2015. Forthcoming. British Classicism to 1700 and the Search for a National Architectural Style. In: Payne, A., ed. Companion to Early Modern Architecture. Chichester, U. K.: Wiley-Blackwell.

Hart, V., 2014. Forthcoming. Five building portraits : Greenwich, Blenheim, St Mary le Strand, All Souls and the Radcliffe Camera. In: van Eck, C., ed. Companion to Architectural Theory and Practice, Landscape Architecture and Urbanism. Chichester, U. K.: Wiley-Blackwell.

Hart, V., 2010. Stadium. In: Grafton, A., Most, G. W. and Settis, S., eds. The Classical Tradition. Cambridge, Mass.: Harvard University Press, p. 907.

Hart, V., 2010. Theatre Architecture. In: Grafton, A., Most, G. W. and Settis, S., eds. The Classical Tradition. Cambridge, Mass.: Harvard University Press, pp. 933-994.

Hayles, C. S., 2006. 'Value added' to the university curriculum. In: The World of Innovation. Managing Value, Risk and Relationships. .

Hayles, C. S. and Bluck, B. J., 1994. Sandstone decay mechanisms under examination on the balcony of Culzean Castle, South West Scotland. In: Fassina, V., Ott, H. and Zezza, F., eds. Proceedings of the 3rd International Symposium, Venice, 22-25 June 1994. Venice, italy: Soprintendenza ai Beni Artistici e Storici di Venezia.

Hayles, C. S. and Dean, M., 2010. Adapting to zero carbon living. In: Proceedings of CIB 2010 World Congress, Salford, Manchester, 10-13 May 2010. .

Hayles, C. S., Dean, M. and Chinowsky, P., 2010. A study potential approaches to supporting behaviour changes required to meet the challenges of climate change and the built environment. In: Proceedings of the COBRA 2010 RICS Research Conference, Paris, France, 2-3 September 2010. .

Hayles, C. S., Dean, M. and McCullough, J., 2011. Climate change mitigation and the social housing sector. In: Proceedings of the Behaviour, Energy and Climate Change (BECC) Conference, Washington D. C., U. S. A., 29 November-2 December 2011. .

Hayles, C. S. and Egbu, C. E., 2004. Will the knowledge management specialist please stand up! : Experiences from the UK construction industry and beyond. In: Khosrowshahi, F., ed. Proceedings of the 20th Annual ARCOM Conference 1-3 September 2004, Edinburgh, U. K. Vol. 2. Association of Researchers in Construction Management (ARCOM), pp. 805-814.

Hayles, C. S. and Fong, P. S.-W., 2005. Managing knowledge through value management for sustainable project solutions. In: Proceedings of the Conference on Sustainable Building - South East Asia, Malaysia. 11-13 April 2005. , pp. 416-423.

Hayles, C. S. and Hadjri, K., 2007. eFeedback and eAssessment tools for improved student engagement. In: Proceedings of the 3rd Annual Built Environment Education Annual Conference (BEECON) London, 12-13 September 2007. .

Hayles, C. S. and Holdsworth, S. E., 2006. Curriculum change for sustainability. In: Proceedings of the Built Environment Education Annual Conference (BEECON), London 12-13 September 2006. .

Hayles, C. S., Horne, R. E., Jensen, D. and Wakefield, R., 2006. An international comparison of housing energy efficiency and performance standards. In: Proceedings of the Construction Research Conference of the RICS (COBRA) London, 7-8th September 2006. .

Hayles, C. S. and de la Harpe, B., 2007. A study of student perceptions and awareness of sustainability issues. In: Proceedings of the 3rd Annual Built Environment Education Annual Conference (BEECON) London, 12-13 September 2007. .

Hayles, C. S. and de la Harpe, B., 2010. Can greening the curriculum influence students' perceptions and awareness of sustainability? In: Proceedings of CIB 2010 World Congress Salford, Manchester, 10-13th May 2010. .

Hayles, C., 2001. Foresight : Repair, refurbishment and re-use of facilities. In: Constructing the Future. London: Department of Trade and Industry.

Heath, A. and Walker, P. J., 2013. Structural design for earth buildings. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation. Abingdon, U. K.: CRC Press, pp. 1901-1905.

Heath, A. and Paine, K., 2014. Reducing CO2 : Optimum blend of binders in the UK. In: Book of proceeding of 34th Annual Conference on Cement and Concrete Science, Sheffield, UK. .

Holdsworth, S., Bekessey, S., Hayles, C. and Thomas, I., 2006. Beyond leather patches (BELP) : sustainability education at RMIT University. In: Leal Filho, W. and Carpenter, D., eds. Sustainability in the Australasian University Context. New York, U. S. A.: Peter Lang, pp. 153-176. (Environmental Education, Communication, and Sustainability; 24)

Holdsworth, S., Bekessey, S., Mnguni, P., Hayles, C. and Thomas, I., 2006. Beyond leather patches (BELP) : sustainability education at RMIT University. In: Leal Filho, W. and Carpenter, D., eds. Sustainability in the Australasian University Context. New York, U. S. A.: Peter Lang, pp. 107-128. (Environmental Education, Communication, and Sustainability; 22)

Hsu, M. F. and Chang, W. S., 2007. Research efforts being devoted to traditional Chuan-Dou timber structures after Chi-Chi earthquake in Taiwan. In: Brebbia, C. A., ed. Structural Studies, Repairs and Maintenance of Heritage Architecture X. Southampton, UK: WIT Press, pp. 143-152.

Hu, J., Du, J. and Place, W., 2011. The assessment of advanced daylighting systems in multi-story office buildings using a dynamic method. In: Moshfegh, B., ed. Proceedings of World Renewable Energy Congress 2011. Linkoping, Sweden: Linkoping University, pp. 1867-1874.

Hu, J., Du, J. and Place, W., 2011. The performance evaluation of advanced daylighting systems in multi-story office buildings : measurement and simulation. In: Bodart, M. and Evrard, A., eds. Proceedings of PLEA 2011- 27th Conference on Passive and Low Energy Architecture. Louvain, Belgium: Universitaires de Louvain, pp. 813-817.

Huang, P., Chang, W.-S., Shea, A., Ansell, M. P. and Lawrence, R. M. H., 2014. Non-homogeneous thermal properties of bamboo. In: Aicher, S., Reinhardt, H. W. and Garrecht, H., eds. Materials and Joints in Timber Structures. Springer, pp. 657-664. (RILEM Bookseries; 9)

Ibell, T., Orr, J., Kostova, K., Darby, A. and Evernden, M., 2013. Extraordinary possibilities for future concrete structures. In: 8th Asia Pacific Conference on Structural Engineering: Future Cities. .

Ibell, T., Darby, A. and Denton, S., 2009. The goal for the FRP industry to be in Quadrant 1: ongoing research to assist in this quest. In: Advanced Composites in Construction 2009, ACIC 2009: Proceedings of the 4th International Conference. , pp. 31-40.

Ioannou, S., Paine, K. and Quillin, K., 2012. Resistance of supersulfated cement concrete to carbonation and sulfate attack. In: Patricios, N. and Alifragkis, S., eds. Construction. Athens, Greece: Athens Institute for Education and Research, pp. 293-305.

Isaac, P., Darby, A., Ibell, T., Evernden, M. and Silva, P., 2011. Response of FRP wrapped RC columns to impact loads. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 252-263.

Jonas, K., Kobayashi, P. and Shepherd, P., 2013. From Generic to Specific:Prototyping a Computational Growth Model. In: Proceedings of the Design Modeling Symposium Berlin 2013. Berlin: .

Jonas, K., Penn, A. and Shepherd, P., 2014. Designing with Discrete Geometry. In: Rethinking Comprehensive Design: Speculative Counterculture. , pp. 513-522.

Jorgensen, B. and Emmitt, S., 2007. Integrating design and construction from a lean perspective. In: Proceedings of CIB World Building Congress. .

Jorgensen, B., Emmitt, S. and Ballard, G., 2005. Divergent focus in the application of lean ideas : examples from Denmark and California. In: Proceedings of 13th Annual Conference of the International Group on Lean Construction (IGLC) , 2005. , pp. 395-404.

Jorgensen, B., Emmitt, S. and Bonke, S., 2004. Integrating (lean) design and construction : Paper no. 824. In: Building for the Future, Proceedings of CIB World Building Congress, 2004. Toronto, Canada: National Research Council of Canada.

Jorgensen, B., Emmitt, S. and Bonke, S., 2004. Revealing cultures and sub-cultures during the implementation of lean construction. In: Bertelsen, S. and Formoso, C. T., eds. Proceedings of 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 2004. Lean Construction, pp. 141-153.

Jorgensen, B., Emmitt, S. and Bonke, S., 2004. Studying cultural issues : the implementation of facilitated process-orientated co-operation. In: Khosrowshahi, F., ed. Proceedings 20th Annual ARCOM Conference, 2004. Reading, U. K.: Association of Researchers in Construction Management (ARCOM), pp. 957-964.

Joyce, S. and Harding, J., 2013. The Generator 2.0. In: Rethinking Prototyping. Epubli.

Joyce, S., Maleczek, R. and Genevaux, C., 2013. Linear folded V-shaped stripes. In: Rethinking Prototyping. Epubli.

Kagioglou, M., Formoso, C. and Emmitt, S., 2004. 'Champions' comments : product development and design management. In: Proceedings of 12th Annual Conference on Lean Construction (IGLG), 2004. Helsingor, Denmark: , pp. 357-359.

Kagioglou, M., Formoso, C. and Emmitt, S., 2004. 'Champions' comments : product development and design management. In: Proceedings of 12th Annual Conference on Lean Construction (IGLG), 2004. Helsingor, Denmark: , pp. 357-359.

Kansara, K., Ibell, T., Darby, A., Evernden, M. and Teng, J.-G., 2011. Conservativeness in FRP-based structural strengthening design process. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 168-179.

Kershaw, T. J., 2012. Characterising the response of buildings to climate change : The issue of overheating. In: Cities and the urgent challenges of climate change. Vol. 2. World Bank, pp. 382-394.

Kjeldsen, T. R., Lamb, R. and Blazkova, S., 2014. Uncertainty in flood frequency analysis. In: Beven, K. and Hall, J., eds. Applied Uncertainty Analysis for Flood Risk Management. Imperial College Press, pp. 153-197.

Kjeldsen, T. R., Svensson, C. and Miller, C., 2012. Large-scale attribution of trend in UK flood flow data. In: British Hydrological Society (BHS) National Symposium. Dundee, U. K.: British Hydrological Society.

Kostova, K. Z., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. Behaviour of fabric-formed concrete beams reinforced with FRP bars. In: Advanced Composites in Construction 2013, ACIC 2013. , pp. 286-297.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Advanced composite reinforcement for fabric-formed structural elements. In: Orr, J., Evernden, M., Darby, A. and Ibell, T., eds. Proceedings of the Second International Conference on Flexible Formwork: icff2012. Bath: The BRE Centre for Innovative Construction Materials, pp. 200-210.

Kostova, K., Ibell, T. J., Darby, A. P. and Evernden, M., 2012. Innovative structural systems for architecturally expressive and sustainable concrete structures. In: Fam, A. Z., Green, M. F. and Wight, R. G., eds. 6th International Conference on Advanced Materials in Bridges and Structures 2012 (ACMBS-VI 2012): Kingston, Ontario, Canada 22-25 May 2012. Montreal, QC: Canadian Society for Civil Engineering (CSCE), pp. 109-116.

Lanckriet, T., Puleo, J. A., Masselink, G., Turner, I.L., Conley, D., Blenkinsopp, C. and Russell, P.E., 2012. Field measurements of sheet flow sediment transport in the swash zone. In: Lynett, P. and McKee Smith, J. M., eds. International Conference on Coastal Engineering. Vol. 33 (2012). .

Lark, R., Al-Tabbaa, A. and Paine, K. A., 2013. Biomimetic multi-scale damage immunity for construction materials: M4L project overview. In: ICSHM 2013: Proceedings of the 4th International Conference on Self-Healing Materials, Ghent, Belgium, June 16-20, 2013. Ghent: Delft University of Technology, pp. 400-404.

Lawrence, M., Heath, A. and Walker, P., 2010. Development of a novel binder for mortar for unfired clay bricks. In: 2nd International Conference on Sustainable Construction Materials and Technologies. , pp. 755-765.

Lawrence, M., Walker, P. and Zhou, Z., 2013. Influence of interfacial material pore structure on the strength of the brick/lime mortar bond. In: Válek, J., Hughes, J. and Groot, C., eds. Historic Mortars. Dordrecht, Germany: Springer, pp. 373-381. (Rilem Bookseries; 7)

Lawrence, M., Heath, A. and Walker, P., 2009. Monitoring of the Moisture Content of Straw Bale Walls. In: Howlett, R. J., Lakhmi, C. J. and Shaun, H. L., eds. Sustainability in Energy and Buildings: Proceedings of the International Conference in Sustainability in Energy and Buildings (SEB'09). Vol. Part 3. Berlin Heidelberg: Springer, pp. 155-164.

Lawrence, R. M. H. and Walker, P., 2008. The impact of the water/lime ratio on the structural characteristics of air lime mortars. In: D'Ayala, D. F. and Fodde, E., eds. Structural Analysis of Historic Construction: Preserving Safety and Significance. Proceedings of the VI International Conference on Structural Analysis of Historic Construction, SAHC08, 2-4 July 2008, Bath, United Kingdom. London: Taylor & Francis, pp. 885-889.

Levermore, G., Muneer, T., Page, J., Sanders, C., Chow, D., Natarajan, S., Parkinson, J., Colley, M., Hulme, M. and Watkins, R., 2006. External design data. In: Butcher, K., ed. Environmental Design. CIBSE, p. 47. (Guide A)

Lewin, C., Thorman, M., Waterson, T., Williams, C. and Willis, P., 2013. Rod constraints for simplified ragdolls. In: SCA '13 Proceedings of the 12th ACM SIGGRAPH/Eurographics Symposium on Computer Animation. New York: ACM, pp. 79-84.

Li, X., Yang, B., Gao, F. and Zang, J., 2010. A FEM Model for Wave-Induced Pore Pressure Responses around Pile Foundations. In: Proceedings of the 20th (2010) International Offshore and Polar Engineering Conference, ISOPE-2010. International Society of Offshore and Polar Engineers, pp. 674-679.

Lombillo, I., Villegas, L., Fodde, E. and D'Ayala, D., 2012. Experimental diagnosis of earthen construction : characterization and in situ estimation. In: Ural, O., Sahin, M. and Ural, D., eds. Proceedings of the XXXVIII IAHS World Congress on Housing: Visions for the Future of Housing: Mega Cities. April 16-19, 2012, Istanbul, Turkey. Istanbul, Turkey: Istanbul Technical University Press, pp. 377-393.

Lovett, T. and O'Neill, E., 2012. Simulating user intervention for interactive semantic place recognition with mobile devices. In: LocalPeMA'12: Proceedings of the 2012 RecSys Workshop on Personalizing the Local Mobile Experience. New York: ACM, pp. 13-18.

Lovett, T., Gabe-Thomas, E., Natarajan, S., Brown, M. and Padget, J., 2014. Designing sensor sets for capturing energy events in buildings. In: e-Energy 2014 - Proceedings of the 5th ACM International Conference on Future Energy Systems. New York, U. S. A.: ACM, pp. 229-230.

Lu, M., Du, J. and Wang, X., 2010. Comparative assessment of daylight availability in high-density residential area : a case in Harbin. In: Proceedings of the First China-UK Forum on Low Carbon Cities and Architecture, 2010. Harbin, China: Harbin Institute of Technology, pp. 1-10.

Mabon, L. and Williams, C., 1999. Wind generated waves on fabric structures. In: Sajjadi, S. G., Thomas, N. H. and Hunt, J. C. R., eds. Wind-over-wave Couplings: Perspectives and Prospects. Oxford University Press, pp. 119-125.

McCullough, J. and Hayles, C. S., 2009. Education for sustainable development : interim paper for COST C25. In: Proceedings of COST C25 Working Group Meeting, Timisoara, Australia, 2009. .

McCullough, J. E., Hayles, C. S. and Dean, M., 2010. Methodology for assessing end users and design teams' perceptions, awareness and behaviours around sustainable housing design. In: Proceedings of SB10 Sustainable community - Building SMART, 22-24 September 2010. .

Mccombie, P., 1999. A discussion of approaches to programming slope stability analysis. In: Kumar, B. and Topping, B. V. H., eds. Computing Developments in Civil and Structural Engineering. Civil-Comp Press, pp. 177-184.

Mccombie, P. and Penman, J., 1999. The Production of interactive engineering design software using Borland Delphi. In: Kumar, B. and Topping, B. H. V., eds. Computing Developments in Civil and Structural Engineering. Edinburgh, U. K.: Civil-Comp Press, pp. 1-7.

Mcgilligan, C., Natarajan, S. and Nikolopoulou, M.-H., 2011. Comparison of energy savings achievable by adaptive comfort standards using the Adaptive Comfort Degree Day. In: Proceedings of the 5th International Conference on Solar Radiation and Daylighting. Brno, Czech Republic: .

Mcgilligan, C., Natarajan, S. and Nikolopoulou, M.-H., 2011. Use of Adaptive Comfort Degree-Days to compare energy savings from adaptive comfort standards for future UK climates. In: CIBSE Technical Symposium. London: CIBSE.

Mead, S., Blenkinsopp, C., Moores, A. and Borrero, J., 2010. Design and construction of the Boscombe multi-purpose reef. In: McKee Smith, J. and Lynett, P., eds. 32nd International Conference on Coastal Engineering. Vol. 32 (2010). .

Medjdoub, B., Richens, P. and Barnard, N., 2001. Building Services Standard Solutions. Variational Generation of Plant Room Layouts. In: de Vries, B., van Leeuwen, J. and Achten, H., eds. Proceedings of the 9th International Conference on Computer Aided Architectural Design Futures. Kluwer Academic, pp. 479-493.

Melhado, S. B., Fabricio, M., Emmitt, S. and Bouchlaghem, D., 2011. The building design process in the context of different countries : similarities and differences of professional practices. In: Otter, A.,, Emmitt, S. and Achammer, C., eds. Architectural Management in the Digital Arena, Proceedings of CIB W096, 2011. Eindhoven, The Netheralnds: Eindhoven University Press, p. 1134.

Moran, F. and Natarajan, S., 2011. PV in Historic Dwellings: the potential to reduce domestic CO2 emis- sions. In: Centre for alternative Technology Science Symposium. .

Morgan, G., Zang, J., Greaves, D., Heath, A., Whitlow, C. and Young, J., 2010. Using the rasInterFoam CFD model for wave transformation and coastal modelling. In: Proceeding of Coastal Engineering. American Society of Civil Engineers, pp. 418-423.

Muddle, D., Briggs, K., Dashwood, C. and Dijkstra, T., 2015. Forthcoming. The influence of slope geology on landslide occurrence during extreme rainfall. In: XVI European Conference on Soil Mechanics and Geotechnical Engineering. . Item availability may be restricted.

Musau, F., 2009. Control system for energy reduction in vacant environments. In: PLEA 2009 - Architecture Energy and the Occupant's Perspective: Proceedings of the 26th International Conference on Passive and Low Energy Architecture. Quebec: Les Presses de l'Universite Laval.

Natarajan, S., 2007. Future climate and domestic carbon emissions. In: Climate Change and the Built Environment. GRIC - Group of Construction Research and Information.

Nesti, C. and Pesce, G. L. A., 2009. Etichettatura delle calci e garanzia di qualità. In: Proceedings of the 7th IGIIC national conference - Lo stato dell’arte 7. Naples, Italy 8-10 October 2009. Firenze: Nardini Editore.

Nesti, C. and Pesce, G., 2010. Sustainable tourism and cultural policies: Considerations based on the example of dry stone walls conservation in Cinque Terre National Park (Italy). In: Proceedings of the 5th International Conference on Science and Technology in Archaeology and Conservation, Granada, Spain 07-12 July 2007. Petra, Jordan: Amman.

Nevola, F., 2010. A short note for Francesco di Giorgio Martini’s Madonna of the Earthquakes (1467). In: Israëls, M. and Waldman, L. A., eds. Toward a Festschrift: Renaissance Studies in Honor of Joseph Connors. Florence: Leo S. Olschki.

Nevola, F., 2007. Civic Identity and Private Patrons in Renaissance. In: Syson, L., Angelini, A., Jackson, P. and Nevola, F., eds. Renaissance Siena: Art for a City. London-New Haven: National Gallery Publications, pp. 16-29.

Nevola, F., 2013. Forthcoming. Construire la ville de la Renaissance : L’exemple siennois. In: Bourdin, S., Paoli, M. and Reltgen-Tallon, A., eds. La forme de la ville, Acts of the International Conference Amiens (7-9 November 2011). Amiens, France: Presses Universitaires de Rennes.

Nevola, F., 2009. Francesco Patrizi: umanista, urbanista e teorico di Pio II. In: Nevola, F., ed. Pio II Piccolomini: Il papa del rinascimento a Siena, Acts of the International Conference, Siena, 5-7 May 2005. Siena: Alsaba grafica.

Nevola, F., 2007. Il palazzo Chigi alla Postierla: sistemazione urbana e genesi del progetto. In: Fargnoli, N., ed. Il Palazzo Chigi Piccolomini alla Postierla. Vol. 6. Asciano: Ali Editoria & Comunicazione, pp. 26-43. (Quaderni della Soprintendenza per il patrimonio storico, artistico e demoetnoantropologico di Siena e Grosseto)

Nevola, F., 2009. Ordering the piazza del Campo in Siena. In: Jansen, K., Drell, J. and Andrews, F., eds. Medieval Italy: Texts in Translation. Philadelphia: Penn State University Press, pp. 261-264.

Nevola, F., 2012. Forthcoming. Picturing disaster in Renaissance Italy. In: Schenk, G. J., ed. Learning from Disaster from Antiquity to Early Modern Times. Heidelberg: Springer.

Nevola, F., 2009. Strategie abitative dell'élite senese tra '400 e '500: politica, alleanze ed architettura. In: Ascheri, M., Mazzoni, G. and Nevola, F., eds. L’ultimo secolo della repubblica di Siena: arti cultura e società, Acts of the International Conference, Siena (28-30 Sept. 2003 and 16-18 Sept. 2004). Siena: Accademia Senese degli Intronati, pp. 137-152.

Nevola, F., 2005. The Palazzo Spannocchi: Creating Site and Setting in Renaissance Sienese Architecture. In: Jenkens, L. A., ed. Renaissance Siena: Art in Context. Vol. 71. Kirksville: Truman State University Press, pp. 141-156. (Sixteenth Century Essays & Studies)

Nevola, F., 2013. Forthcoming. Urban responses to disaster in renaissance Italy : images and rituals. In: Folin, M. and Preti, M., eds. The Wounded City. Aldershot, U. K.: Ashgate.

Nevola, F., 2006. “Più honorati et suntuosi ala Republica”: Botteghe and Luxury Retail along Siena’s Strada Romana. In: Blondé, B., Stabel, P., Stobbart, J. and Van Damme, I., eds. Buyers and Sellers: Retail Circuits and Practices in Medieval and Early Modern Europe. Belgium: Turnhout, pp. 65-78.

Nevola, F., 2008. “la piu gloriosa solemnità che a di de padri nostri giammai fusse veduta”: Feste ed apparati urbani durante il pontificato di Pio II Piccolomini. In: Ricciardelli, F., ed. I luoghi del Sacro. Il sacro e la città fra medioevo ed età moderna, acts of the conference. Florence: Polistampa, pp. 173-188.

Nikolopoulou, M., 2004. Outdoor Comfort. In: Steemers, K. and Steane, M. A., eds. Environmental Diversity in Architecture. London: Spon Press, pp. 101-120.

Nikolopoulou, M., 2003. Vegetation in the Urban Environment. In: The Integration of Renewable Energy Sources in Buildings and the Urban Environment. Athens: CRES, ALTENER.

Nikolopoulou, M., 2004. Evaluation of Tools. In: Nikolopoulou, M., ed. Designing Open Spaces in the Urban Environment: a Bioclimatic Approach. Athens: Centre for Renewable Energy Sources, EESD, FP5, pp. 47-50.

Nikolopoulou, M., Lykoudis, S. and Kikira, M., 2004. Thermal Comfort Models for Open Urban Spaces. In: Nikolopoulou, M., ed. Designing Open Spaces in the Urban Environment: a Bioclimatic Approach. Athens: Centre for Renewable Energy Sources, EESD, FP5, pp. 2-6.

Nitsche, M. and Richens, P., 2006. Telling Stories through Space : The Mindstage Project. In: Goebel, S., Malkewitz, R. and Iurgel, I., eds. Technologies for interactive storytelling and entertainment (TIDSE 2006). Berlin/Heidelberg: Springer, pp. 61-71. (Lecture Notes in Computer Science; 4326)

Norton, B., Hobday, R. A. and Lo, S. N. G., 1992. Thermosyphoning Air Panels. In: Boer, K. W., ed. Advances in Solar Energy, vol 7. Vol. 7. Boulder, Colorado: American Solar Energy Society, pp. 495-571.

Novelli, V., De Vos, M., Padget, J. and D'Ayala, D., 2012. LOG-IDEAH:ASP for architectonic asset preservation. In: Dovier, A. and Santos Costa, V., eds. Technical Communications of the 28th International Conference on Logic Programming (ICLP'12). Dagstuhl: Schloss Dagstuhl - Leibniz-Zentrum fuer Informatik, pp. 393-403. (Leibniz International Proceedings in Informatics (LIPIcs); 17)

Orr, J., Darby, A., Ibell, T., Evernden, M., Lava, P. and Debruyne, D., 2013. The shear behaviour of non-prismatic reinforced concrete beams determined using digital image correlation. In: 5th International Conference on Optical Measurement Techniques for Systems & Structures. .

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2011. Fibre reinforced polymer grids as shear reinforcement in fabric formed concrete beams. In: Advanced Composites in Construction 2011, ACIC 2011. , pp. 72-83.

Orr, J., Ibell, T., Darby, A. and Evernden, M., 2013. Extraordinary possibilities using fabric to form concrete structures. In: Zingoni, A., ed. Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation. Abingdon, U. K.: Taylor & Francis, pp. 813-818.

Paganoni, S. and D'Ayala, D., 2010. Experimental and computational validation of dissipative prototype for the seismic protection of heritage buildings. In: Structural Analysis of Historic Constructions. Zurich: Trans Tech, pp. 831-836. (Advanced Materials Research)

Paine, K., Ioannou, S., Abora, K. and Quillin, K., 2013. Low Carbon Concrete: Research with Non-Portland Cements. In: Dhir, R. K., Singh, S. P. and Goel, S., eds. Innovations in Concrete Construction. New Delhi: Excel India Publishers, pp. 749-762.

Paine, K. A., 2008. Research towards sustainable concrete. In: Concrete and Steel Yearbook 2008-09. Cheshire, UK: Ten Alps Publishing, p. 9.

Paine, K. A., Dhir, R. K., Halliday, J. E., Zheng, L., Collery, D. J. and Rai, H. S., 2011. Use of recycled and secondary aggregates in concrete: engineering and environmental considerations. In: Newlands, M. D. and Dhir, R. K., eds. Concrete for High Performance Sustainable Infrastructure. Mumbai: Shroff Publishers and Distributors, pp. 77-86.

Paine, K. A., Zheng, L. and Dhir, R. K., 2005. Early age temperature rises in GGBS concrete: Part 2: T1 values for low heat and very low heat cements. In: Dhir, R. K., Harrison, T. A. and Newlands, M. D., eds. Cement Combinations for Durable Concrete. Dundee: Thomas Telford, pp. 183-194.

Pan, Y. H., Tzeng, C. T. and Emmitt, S., 2011. A study of BIM performance at the design stage by architecture consulting firms in Taiwan. In: Otter, A., Emmitt, S. and Achammer, C., eds. Architectural Management in the Digital Arena, Proceedings of CIB W-096, 2011. Eindhoven, Netherlands: Eindhoven University Press, p. 1109.

Patterson, M. D., Caulfield, C. P. and Dalziel, S. B., 2006. Buoyant mixing of unstably stratified fluids in a vertical square tube. In: Ivery, G., ed. Proceedings of the 6th International Symposium on Stratified Flows. , pp. 575-580.

Peaston, C. H., Elliott, K. S. and Paine, K. A., 1999. Steel fiber reinforcement for extruded prestressed hollow core slabs. In: Banthia, N., Macdonald, G. and Tatnall, P., eds. Structural Applications of Fiber Reinforced Concrete. American Concrete Institute, pp. 87-107. (SP-182)

Perera, K., Ibell, T., Darby, A. and Denton, S., 2009. Bond mechanisms of various shapes of NSM CFRP bars. In: Advanced Composites in Construction 2009, ACIC 2009 - Proceedings of the 4th International Conference. , pp. 250-258.

Pesce, G. L. A., 2010. Radiocarbon dating of lumps of not completely mixed lime contained in old constructions: The sampling problems. In: Valek, J., Groot, C. and Hughes, J. J., eds. 2nd Conference on Historic Mortars - HMC 2010 and RILEM TC 203-RHM final workshop. Prague, Czech Republic 22-24 September 2010. Prague: RILEM.

Pesce, G. L. A., 2010. Thermal activation of kaolinite used as hydraulic additive of old lime mixtures. In: Valek, J., Groot, C. and Hughes, J. J., eds. 2nd Conference on Historic Mortars - HMC 2010 and RILEM TC 203-RHM final workshop. Prague, Czech Republic 22-24 September 2010. Prague: RILEM.

Pesce, G. L. A., Cavaciocchi, P., Guastella, R. and Vecchiattini, R., 2009. La chiesa di S. Nicolò di Capodimonte (Camogli - GE): dal cantiere di diagnosi al progetto di restauro. In: Proceedings of the 7th IGIIC national conference - Lo stato dell’arte 7. Naples, Italy 8-10 October 2009. Firenze: Nardini Editore.

Pesce, G. L. A., Costa, S. and Bianconi, L., 2010. Software open source per l’analisi dei dati in archeologia. In: De Felice, G. and Sibilano, G., eds. ArcheoFOSS 2010 - Atti del V workshop nazionale Open Source, Free Software e Open Format nei processi di ricerca archeologica. Foggia, Italy 6-7 Maggio 2010. Foggia, Italy: Edipuglia.

Pesce, G. L. A. and Vecchiattini, R., 2011. Technical regulations: limitations or resource? The case of building limes. In: Martines, R. and Biscontin, G., eds. Proceedings of the 27th International Conference on Science and Cultural Heritage. Bressanone, Italy 21–24 June 2011. Padua, Italy: Edizioni Arcadia Ricerche.

Pesce, G., 2008. L'analisi archeologica degli elevati attraverso l'uso del free and open source software. In: Bezzi, L., Francisci, D., Grossi, P. and Lotti, D., eds. Atti del 3rd Workshop open Source, free Software e open Format nei processi di ricerca archeologica. Padova, Italy: Quasar.

Pesce, G. and Nesti, C., 2006. Le modifiche agli interventi di conservazione e restauro dei beni culturali introdotte dalla più recente normativa italiana. In: Proceedings of the 4th IGIIC National Conference. Florence, Italy: Nardini Editore.

Pesce, G., Nesti, C. and Vecchiattini, R., 2007. The preservation of the cultural heritage of property through an analysis of European regulations regarding building materials used in restoration. In: Drdacky, M. and Chapius, M., eds. Proceedings of the 7th European Conference SAVEUR - Safeguarded Cultural Heritage - Understanding & Viability for the Enlarged Europe. Prague, Czech Republic: Institute of Theoretical and Applied Mechanics of the Academy of Sciences of the Czech Republic.

Pesce, G. and Ricci, R., 2008. The use of metakaolinite as a hydraulic agent of aerial lime plasters and mortars. The case study of Genoa (Italy). In: Proceedings of the 1st Historical Mortars Conference - HMC08 - Characterization, Diagnosis, Conservation, Repair and Compatibility. .

Pesce, G. L. and Decri, A., 2013. Analisi critica della datazione delle malte con il metodo del radiocarbonio. In: Micheletto, E., ed. La Cattedrale di Alba. Archeologia di un Cantiere (ArcheologiaPiemonte 1). Florence, Italy: All’Insegna del Giglio, pp. 217-222.

Pesce, G., 2000. Analisi delle strutture di fondazione. In: Varaldo, C., ed. Archeologia urbana a Savona. Italy: Marco Sabatelli Editore, pp. 61-63.

Pesce, G., 2000. La datazione mensiocronologica. In: Varaldo, C., ed. Archeologia urbana a Savona. Italy: Marco Sabatelli Editore, p. 25.

Pesce, G., 2000. Lo studio della volta ad ombrello. In: Varaldo, C., ed. Archeologia urbana a Savona. Italy: Marco Sabatelli Editore, pp. 34-38.

Pesce, G. and Martini, S., 2005. Il terrazzamento con muri in pietra a secco. Forme e cause di degrado. In: V.V.A.A. 2005. Italy: La Spezia, pp. 32-50.

Pesce, G. and Martini, S., 2005. Il terrazzamento con muri in pietra a secco. La tecnica costruttiva. In: V.V.A.A. 2005. italy: La Spezia, pp. 15-31.

Pesce, G. and Martini, S., 2005. Indicazioni per la ricostruzione dei muri a secco. In: V.V.A.A. 2005. Italy: La Spezia.

Pesce, G. and Martini, S., 2005. Introduzione. In: V.V.A.A. 2005. Italy: La Spezia.

Pesce, G. and Martini, S., 2005. La sistemazione artificiale dei pendii. In: V.V.A.A. 2005. Italy: La Spezia, pp. 7-14.

Pesce, G. and Martini, S., 2005. Origine dello studio. In: V.V.A.A. 2005. Italy: La Spezia.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Ferreira, V. M., Dias, A. B., Afonso, A. S. and de Brito, J., eds. Congress of Innovation on Sustainable Construction (CINCOS'12), 20-22 September 2012, University of Aveiro, Portugal. , pp. 319-328.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Russell, M., ed. 32nd Cement & Concrete Science Conference, 17-18 September 2012, Queens University Belfast, Belfast. , pp. 116-121.

Pesce, G. L. A. and Ball, R. J., 2012. Dating of Old Lime Based Mixtures with the "Pure Lime Lumps" Technique. In: Nawrocka, D. M., ed. Radiometric Dating. InTech.

Pevsner, N. and Forsyth, M., 2009. Preface and postscript by Michael Forsyth. In: An Outline of European Architecture (Revised ed.). London, U. K.: Thames and Hudson.

Powell, R. and Copping, A., 2010. Construction worker sleep deprivation and its effects on personal safety. In: Association of Researchers in Construction Management, ARCOM 2010: Proceedings of the 26th Annual Conference. , pp. 203-211.

Proctor, R. W., 2009. A World of Things in Emergence and Growth : René Binet’s Porte Monumentale at the 1900 Paris Exposition. In: O'Mahony, C., ed. Symbolist Objects. High Wycombe, U. K.: Rivendale Press, pp. 220-244.

Proctor, R. W., 2009. Evolution and Tradition: The Glasgow School of Architecture under Eugene Bourdon. In: McKenzie, R., ed. The Flower and the Green Leaf: Glasgow School of Art in the Time of Charles Rennie Mackintosh. Edinburgh: Luath Press, pp. 80-94.

Proctor, R. W., 2012. Religion and nation : the architecture and symbolism of irish identity in the Roman Catholic Church in Britain. In: Quek, R., Deane, D. and Butler, S., eds. Nationalism and Architecture. Farnham, U. K.: Ashgate, pp. 39-51. (Ashgate Studies in Architecture)

Proctor, R. W., 2014. Uncertainty and the Modern Church:Two Roman Catholic Cathedrals in Britain. In: Kulic, V., Penick, M. and Parker, T., eds. Sanctioning Modernism. Austin: University of Texas Press, pp. 113-138.

Puleo, J. A., Blenkinsopp, C., Conley, D., Masselink, G., Russell, P.E., Turner, I.L., Buscombe, D., Lanckriet, T., Mccall, R. and Poate, T., 2012. Comprehensive study of swash-zone hydrodynamics and sediment transport. In: Lynett, P. and McKee Smith, J., eds. 33rd International Conference on Coastal Engineering. Vol. 33 (2012). .

Ramallo Gonzalez, A., Brown, M. and Coley, D., 2013. Using HPC to create an intelligent entity capable of recognising building energy performance by capturing basic thermal information. In: Using HPC to create an intelligent entity capable of recognising building energy performance by capturing basic thermal information. .

Ramsden, J., Keeling, T., Shepherd, P., Shea, A. and Sharma, S., 2015. SmartBuildingAnalyser : A parametric early-stage analysis tool for multi-objective building design. In: Proceedings of the CIBSE Technical Symposium 2015. .

Ratti, C. and Richens, P., 1999. Urban texture analysis with image processing techniques. In: Augenbroe, G. and Eastman, C., eds. Computers in Building: Proceedings of CAAD Futures 99. Boston: Kluwer Academic, pp. 49-64.

Rehmann, C. R., Wain, D. J. and Soga, C. L. M., 2004. Estimates of the dissipation of turbulent kinetic energy from temperature microstructure. In: Proceedings of the 2004 World Water and Environmental Resources Congress: Critical Transitions in Water and Environmental Resources Management. American Society of Civil Engineers (ASCE).

Richens, P., 1997. Computer-aided art direction. In: Penz, F. and Thomas, M., eds. Cinema & architecture: Méliès, Mallet-Stevens, Multimedia. London: British Film Institute.

Richens, P., 2011. Forward. In: Kocatürk, T. and Medjdoub, B., eds. Distributed Intelligence in Design. Wiley-Blackwell, x-xi.

Richens, P., 1999. The Piranesi system for interactive rendering. In: Augenbroe, G. and Eastman, C., eds. Computers in Building: Proccedings of CAAD Futures 99. Boston: Kluwer Academic, pp. 381-398.

Richens, P. and Harney, M., 2013. Beckford's ride: The reconstruction of historic landscapes. In: Bowen, J., Keene, S. and Ng, K., eds. Electronic Visualisation in Arts and Culture. London: Springer, pp. 259-276. (Springer Series on Cultural Computing)

Richens, P. and Herdt, G., 2009. Modelling the Ionic capital. In: Cagdas, G. and Colakoglu, B., eds. Computation: the new realm of architectural design: proceedings of the 27th Conference on Education and Research in Computer Aided Architectural Design in Europe, September 16-19, 2009, Istanbul Technical University and Yildiz Technical University, Istanb. Istanbul: eCAADe, pp. 809-816.

Richens, P. and Nitsche, M., 2005. Mindstage: towards a functional virtual architecture. In: Martens, B. and Brown, A., eds. Computer Aided Architectural Design Futures: Proceedings of the 11th International CAAD Futures Conference. Springer, pp. 331-340.

Rosbjerg, D., Bloschl, G., Burn, D., Castellarin, A., Croke, B., Di Baldassarre, G., Iacobellis, V., Kjeldsen, T. R., Kuczera, G., Merz, R., Montanari, A., Ouarda, T., Ren, L., Rogger, M., Salinas, J., Toth, E. and Viglione, A., 2013. Prediction of floods in ungauged basins. In: Bloschl, G., Sivapalan, M., Viglione, A., Wagener, T. and Savenije, H., eds. Runoff Prediction in Ungauged basins. Cambridge, U. K.: Cambridge University Press, pp. 189-225.

Ruffle, S. and Richens, P., 2001. Web Based Consultation for Cambridge University's Building Program. In: Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture: Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture. ACADIA, pp. 366-371.

Samuel, F., 2003. 'Awakening Place': Le Corbusier at La Sainte Baume. In: Menin, S., ed. Constructing Place: Mind and the Matter of Place-making. London: Routledge, pp. 217-227.

Samuel, F., 2005. La cite Orphique de La Sainte Baume. In: Le Corbusier: Le symbolique, le sacri, la spiritualiti. Paris: Editions La Villette.

Samuel, F. and Menin, S., 2006. The Modern Day Primitive Hut? 'Self Building' with Jung, Aalto and Le Corbusier. In: Odgers, J., Samuel, F. and Sharr, A., eds. Primitive: Original Matters in Architecture. London: Routledge, pp. 207-220.

Sengonzi, R., Demian, P. and Emmitt, S., 2009. A proposal for discursive methods of stakeholder involvement in healthcare project decision. In: Horner, M., Price, A. D. F., Bebbington, J. and Emmanuel, R., eds. Proceedings of 2nd International Conference on Whole Life Urban Sustainability and its Assessment , 2009. Dundee, U. K.: SUE-MoT, pp. 142-155.

Sengonzi, R., Demian, P. and Emmitt, S., 2009. Challenges in negotiating trade-offs in pre-design briefing of healthcare projects. In: Tzeng, C., Emmitt, S. and Prins, M., eds. Proceedings of the International Symposium CIB-W096, 2009. .

Sengonzi, R., Demian, P. and Emmitt, S., 2009. Opportunities for e-brainstorming in pre-design processes of healthcare projects. In: Kagioglou, M., Barlow, J., Price, A., Gray, D. F. and Gray, C., eds. Proceedings of PhD Workshop of HaCIRIC’s International Conference, 2009. HaCIRIC, pp. 32-41.

Sengonzi, R., Demian, P. and Emmitt, S., 2009. Optimizing healthcare facility value through better briefing and optioneering. In: Ahmed, V., Alshawi, M., Egbu, C. and Sutrisna, M., eds. Proceedings of the 9th International Postgraduate Research Conference (IPGRC), 2009. , pp. 352-365.

Shea, A., Hoxey, R. P. and Levermore, G. J., 2002. The performance of a wind and stack driven ventilation device. In: Proceedings of the 5th UK Wind Engineering Society Conference. Hemel Hempstead: Anemos Associates.

Shepherd, P., 2014. Subdivision Surfaces. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures For Architecture. Routledge, pp. 295-300.

Shepherd, P. and Pearson, W., 2013. Topology optimisation of algorithmically generated space frames. In: Proceedings of the IASS Symposium 2013. .

Shepherd, P. and Richens, P., 2010. Subdivision surface modelling for architecture. In: Symposium of the International Association for Shell and Spatial Structures (50th. 2009. Valencia). Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures : Proceedings. Editorial de la Universitat Politécnica de Valencia, pp. 1206-1217.

Shepherd, P. and Williams, C. J. K., 2010. British Museum Great Court. In: Burry, J. and Burry, M., eds. The New Mathematics of Architecture. New York: Thames & Hudson, pp. 122-125.

Spentzou, E., Cook, M. and Emmitt, S., 2013. Enhancing indoor comfort in existing apartment buildings in Athens using natural ventilation. In: Proceedings of the 13th International Conference of the International Building Performance Simulation Association, 2013. .

Stewart, E. J., Kjeldsen, T. R., Jones, D. A. and Morris, D. G., 2008. The flood estimation handbook and UK practice : past, present and future. In: Samuels, P., Huntingdon, S., Allsop, W. and Harrop, J., eds. Flood Risk Management. London, U. K.: CRC Press, p. 179.

Stewart, L., Beran, M., Farquharson, F., Faulkner, D., Jones, D. A., Kjeldsen, T., Newson, M., O'Connell, E. and Sutcliffe, J., 2015. Risks and extremes. In: Rodda, J. C. and Robinson, M., eds. Progress in Modern Hydrology. Chichester, U. K.: Wiley-Blackwell, pp. 60-99.

Sun, L., Choo, Y. S., Eatock Taylor, R. and Llorente, C., 2012. Responses of floating bodies with flexible connections. In: Proceedings of the 2nd Marine Operations Specialty Symposium. Research Publishing Services, pp. 229-243.

Tajaddini, A., Ibell, T. J., Darby, A. P. and Evernden, M., 2013. A parametric study on moment redistribution in FRP-strengthened continuous RC beams. In: 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS-11), 2013: Conference Proceedings. , pp. 203-204.

Tajaddini, A., Ibell, T., Darby, A. and Evernden, M., 2013. Moment redistribution in "anchored" FRP-strengthened continuous RC beams : a theorectical study. In: Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings. , pp. 55-65.

Tang, L., Zhao, F.-Y., Nikolopoulou, M.-H. and Zhang, N., 2011. CFD modeling of built air environment in historic settlements:Village microclimate. In: Proceedings - International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011. Piscataway, NJ: IEEE Computer Society, pp. 1086-1092. (Proceedings - International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011)

Tavernor, R., 2008. Architectural conservation. In: Cane, P. and Conagh, J., eds. The New Oxford Companion to Law. Oxford: Oxford University Press, pp. 46-47.

Tavernor, R., 2008. Composing London visually. In: Marcus, A. and Neumann, D., eds. Visualizing the City. Routledge, pp. 159-178.

Tavernor, R., 2011. Constructing the City over Time. In: Latham, I., ed. Allies and Morrison: Buildings and Projects 1983-2003, Volume 1. London: Right Angle, pp. 10-17.

Tavernor, R., 2010. Heritage strategy. In: KCAP,, Hosper, H., Systematica,, Pöyry, V., Tavernor, and Fakton,, eds. Transforming the City: Perm Strategic Masterplan. , pp. 388-417.

Tavernor, R., 2009. Introduction to Vitruvius, On Architecture. In: Schofield, R. and Tavernor, R., eds. Vitruvius, On Architecture. London: Penguin Classics, xiii-xxxviii.

Thomson, A. and Walker, P. J., 2013. Condition monitoring and durability assessment of straw bale construction. In: Braganca, L., Pinheiro, M. and Mateus, R., eds. Portugal SB13: Contribution of Sustainable Building to Meet EU 20-20-20 Targets. , pp. 791-798.

Thyssen, M. H., Emmitt, S., Bonke, S. and Christoffersen, A. K., 2008. Facilitating value creation and delivery in construction projects via front-end loading. In: Melhado, S., Prins, M., Emmitt, S., Bouchlaghem, D. and den Otter, A., eds. Design Management in the Architectural Engineering and Construction Sector, Proceedings of the Joint CIB W096 and TG49 Conference held in conjunction with the 8th Brazilian Workshop on Building Design Management, 2008. Rotterdam, The Netherlands: CIB, pp. 309-319.

Thyssen, M. H., Emmitt, S., Bonke, S. and Christoffersen, A. K., 2008. Managing client values in construction design. In: Proceedings of Joint CIB Conference W102 - Information and Knowledge Management in Building / W096 - Architectural Management "Improving Performance", 2008. .

Thyssen, M. H., Emmitt, S., Bonke, S. and Christoffersen, A. K., 2008. The Toyota product development system applied to a design management workshop model. In: Proceedings of the 16th Annual Conference of the International Group for Lean Construction (IGLC-16) , 2008. , pp. 507-517.

Tsigkari, M., Chronis, A., Joyce, S., Davis, A., Feng, S. and Aish, F., 2013. Integrated design in the simulation process. In: O'Brian, L., Khan, A. and Gunay, B., eds. SimAUD '13 Proceedings of the Symposium on Simulation for Architecture & Urban Design. San Diego, CA: Society for Computer Simulation International, Article No. 28. (Simulation Series; 45/8)

Turner, I.L., Masselink, G., Russell, P.E. and Blenkinsopp, C., 2008. Bed-level Change Over Individual Swash Cycles On Sand and Gravel Beaches. In: McKee Smith, J., ed. 31st International Conference on Coastal Engineering. Vol. 31 (2008). World Scientific.

Vecchiattini, R. and Pesce, G. L. A., 2012. A study on the traditional production of lime: The role of oral surces. In: Carvais, R., Guilleme, A., Negre, V. and Sakarovitch, J., eds. Proceedings of the 4th International Conference on Construction Industry. Paris: Picard.

Vemuri, N. A., Newlands, M. D. and Paine, K. A., 2005. Study on drying shrinkage of blended cement concretes. In: Dhir, R. K., Halliday, J. E. and Csetenyi, E., eds. Young Researchers' Forum: Proceedings of the International Conference Held at the University of Dundee, Scotland, UK on 7 July 2005. London: Thomas Telford, pp. 225-234. (Young Researchers' Forum)

Wain, D. J., Kohn, M. S., Scanlon, J. A. and Rehmann, C. R., 2011. Transport of fluid from the boundary of a lake. In: Proceedings of the 7th International Symposium on Stratified Flows. .

Wain, D. J. and Rehmann, C. R., 2005. Evaluation of oceanographic microstructure measurements for hydraulic problems. In: Proceedings of the 2005 World Water and Environmental Resources Congress: Impacts of Global Climate Change. American Society of Civil Engineers (ASCE), pp. 1-9.

Walker, I., Chiang, T. and Natarajan, S., 2014. Laboratory and real-world tests of smart meter (In-Home Display) design interfaces. In: Twenty-Eighth International Conference on Applied Psychology. Paris, France: .

Walker, I., Thomas, G. and Natarajan, S., 2013. Environmental attitudes and self-identity can influence perceptions of new appliances using renewable energy sources. In: 10th Biennial Conference on Environmental Psychology. Magdeburg: .

Walker, P., 2002. The Australian Earth Building Handbook. In: The Australian Earth Building Handbook. SAI Global Limited.

Walker, P., 1995. Performance of stabilised soil block masonry under uniform and concentrated compression loading. In: Proceedings of the British Masonry Society. Vol. 7. London: British Masonry Society, pp. 49-54.

Walker, P. and Dickens, J., 1995. Correlation of Structural Movements with Joint Characteristics on Dry-Stone Walls. In: Brebbia, C. A., ed. Structural Studies of Historical Buildings IV. Vol. 1. Computational Mechanics, pp. 357-364.

Walker, P. and Dickens, J., 1995. Dry-stone walls. In: Proceedings of the British Masonry Society. Vol. 7. British Masonry Society, pp. 127-129.

Wang, J., Heath, A. and Walker, P. J., 2014. Numerical analysis of triplet shear test on brickwork masonry. In: Al-Bahar, S. K. and Zhao, J. Y., eds. Advances in Civil Engineering and Building Materials III. Trans Tech Publications, pp. 437-441. (Advanced Materials Research; 831)

Warren, L., Briggs, K. and McCombie, P., 2015. Forthcoming. Advances in the assessment of drystone retaining walls - some case studies. In: XVI European Conference on Soil Mechanics and Geotechnical Engineering. Edinburgh, U. K.: .

Watanabe, K., Fodde, E. and Fujii, Y., 2011. Deterioration and conservation of earthen walls in Ajina Tepa, Tajikistan. In: Iwasaki, Y., ed. Geo-engineering for the Conservation of Cultural Heritage and Historic Sites, 26 May 2011, Hong Kong. , pp. 44-48.

Watanabe, K., Fujii, Y. and Fodde, E., 2008. Conservation of the Buddhist Monastery of Ajina Tepa, Heritage of the Ancient Silk Road (in Japanese). In: Construction, Technology and Conservation of Historical Earthen Structure. , p. 7.

Westphalen, J., Greaves, D. M., Hunt-Raby, A., Williams, C. J. K., Stansby, P. K. and Stallard, T., 2010. Numerical simulation of a floating body in multible degrees of freedom. In: RINA, Royal Institution of Naval Architects - Marine Renewable and Offshore Wind Energy - Papers. The Royal Institution of Naval Architects, pp. 81-88.

Westphalen, J., Greaves, D. M., Hunt-Raby, A., Williams, C. J. K., Taylor, P. H., Hu, Z. Z., Omidvar, P., Causon, D. M., Mingham, C. G., Stansby, P. K. and Rogers, B. D., 2010. Numerical simulation of wave energy converters using Eulerian and Lagrangian CFD methods. In: Proceedings of the 20th (2010) International Offshore and Polar Engineering Conference, ISOPE-2010. Vol. 3. International Society of Offshore and Polar Engineers, pp. 737-744. (Proceedings of the International Offshore and Polar Engineering Conference)

Wilkinson, M. A., 2005. Proceedings of Glass in Buildings 2. In: Keiller, A., Ledbetter, S. and Wilkinson, M., eds. Proceedings of Glass in Buildings 2. Bath, UK: Centre for Window and Cladding Technology, p. 254.

Williams, C., 2005. Computers and the Design and Construction Process. In: Voyatzaki, M., ed. Visions for the Future of Construction Education: Teaching Construction in a Changing World. European Network of Heads of Schools of Architecture.

Williams, C., 2014. Appendix A : the finite element method in a nutshell. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 274-280.

Williams, C., 2014. Appendix B : differential geometry and shell theory. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 281-289.

Williams, C., 2004. Design by algorithm. In: Leach, N., Turnbull, D. and Williams, C., eds. Digital tectonics. Chichester, UK.: Wiley, pp. 78-85.

Williams, C., 2014. The Multihalle and the British Museum:a comparison of two gridshells. In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 239-245.

Williams, C., 2014. What is a shell? In: Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C., eds. Shell Structures for Architecture. London, U. K.: Routledge, pp. 21-31.

Williams, C. J. K. and Kontovourkis, O., 2008. Practical emergence. In: Littlefield, D., ed. Space craft: developments in architectural computing. RIBA Publishing, pp. 68-81.

Williams, C., 2000. The definiton of curved geometry for widespan structures. In: Barnes, M. and Dickson, M., eds. Widespan roof structures. London: Thomas Telford, pp. 41-49.

Williams, C. J. K., 2001. The analytic and numerical definition of the geometry of the British Museum Great Court Roof. In: Burry, M., Datta, S., Dawson, A. and Rollo, A. J., eds. Mathematics & design 2001. Geelong, Victoria, Australia: Deakin University, pp. 434-440.

Williams, C. J. K. and Hudson, R., 2011. Distributed intelligence or a simple coherent mental model? In: Kocatürk, T. and Medjdoub, B., eds. Distributed Intelligence In Design. Wiley-Blackwell, pp. 27-35.

Wilson Jones, M., 2015. Ancient Architecture and Mathematics : Methodology and the Doric Temple. In: Williams, K. and Ostwald, M., eds. Architecture and Mathematics from Antiquity to the Future. Vol. 2. Heidelberg: Birkhäuser, pp. 271-295.

Wilson Jones, M., 2006. Ancient Architecture and Mathematics: Methodology and the Doric Temple. In: Duvernoy, S. and Pedemonte, O., eds. Nexus VI: Architecture and Mathematics. Vol. 6. Turin, Italy: Kim Williams Books, pp. 1-20.

Wilson Jones, M., 2009. Ancient Greek and Roman architects’ approach to curvature – the Corinthian capital, entasis and amphitheaters. In: Nowacki, H. and Lefèvre, W., eds. Creating Shapes in Civil and Naval Architecture: A Cross-Disciplinary Comparison. Leidon: Brill Academic Publishers, pp. 93-116. (History of Science and Medicine Library)

Wilson Jones, M., 2015. Building on adversity:the Pantheon and the problems of its construction. In: Marder, T. A. and Wilson Jones, M., eds. The Pantheon. Cambridge, U. K.: Cambridge University Press, pp. 193-230.

Wilson Jones, M., 2002. Doric Figuration. In: Tavernor, R. and Dodds, G., eds. Body and Building: Essays on the Changing Relation of Body and Architecture. Cambridge, Mass.: MIT Press, pp. 65-76.

Wilson Jones, M., 2015. Greek and Roman Architectural Theory. In: Marconi, C., ed. The Oxford Handbook of Greek and Roman Art and Architecture. Oxford and New York: Oxford University Press, pp. 41-69.

Wilson Jones, M., 1999. L'ordine architettonico dell'Hadrianeum : Forma e norme. In: Sapelli, M. and Claridge, A., eds. Provinciae fideles. Il fregio del Tempio di Adriano in Campo Marzio. Roma, pp. 129-139.

Wilson Jones, M., 1997. Los procesos del diseño arquitectónico: comprender Vitruvio a partir del los dibujos y maquetas romanas. In: Las casas del alma (5500 aC-300 dC). Maquetas arquitectónicas de la antigüedad. Barcelona: Centre de Cultura Contemporània de Barcelona, pp. 119-128.

Wilson Jones, M., 2015. The Origins of the Orders : Unity in Multiplicity. In: Reeve, M. M., ed. Architecture and the Classical Tradition, from Pliny to Posterity, Tributes to Pierre Du Prey. London and Turnhout: Harvey Miller Publishers, pp. 7-26.

Wilson Jones, M., 2009. The Pantheon and the phasing of its construction. In: Graßhoff, G., Heinzelmann, M. and Wäfler, M., eds. The Pantheon in Rome. Contributions to the Conference, Bern, November 9-12, 2006. Bern: Bern Studies, pp. 69-87.

Wilson Jones, M., 1999. The Practicalities of Roman Entasis. In: Haselberger, L. and Bankel, H., eds. Appearance and Essence: Refinements of Classical Architecture - Curvature : Proceedings of the Second Williams Symposium on Classical Architecture. Philadelphia: UPenn Museum of Archaeology, pp. 225-249.

Wilson Jones, M., 1996. The orders in antiquity. In: Turner, J., ed. Dictionary of Art. Vol. 13. Macmillian, pp. 447-484.

Wilson Jones, M., 2009. The setting out of amphitheatres : ellipse or oval? In: Wilmott, T., ed. Roman Amphitheatres and Spectacula. Vol. 1946. Oxford, U. K.: Archaeopress, pp. 5-14. (British Archaeological Reports International Series)

Wilson Jones, M., 2013. Who built the Pantheon? : Agrippa, Hadrian, Trajan and Apollodorus. In: Opper, T., ed. Hadrian. London, U. K.: The British Museum, pp. 31-49. (British Museum Research Publication; 175)

Wilson Jones, M., Herdt, G., Erkal, A. and D'Ayala, D. F., 2014. The structural assessment of ancient building components : The Temple of Artemis at Corfu. In: Verhagen, P., ed. Archaeology in the Digital Era. Amsterdam: Amsterdam University Press, pp. 130-137.

Wright, A. J. and Natarajan, S., 2003. Modelling future UK carbon dioxide emissions from domestic heating under climate change. In: Climate Change - Energy Awareness - Energy Efficiency: CIB WG 108 meeting, Györ, Hungary. , p. 6.

Wu, L. and Emmitt, S., 2010. Joint design for moving an historic concrete umbrella shaped structure. In: Akintoye, A., Goulding, J., Rahimian, F. P., Brindley, D. and Emmitt, S., eds. Proceedings of 9th International Detail Design in Architecture Conference, 2010. Preston, U. K.: University of Central Lancashire (UCLAN), pp. 181-192.

Wu, L. and Emmitt, S., 2010. Steel joint design of assembled concrete frames. In: Akintoye, A., Goulding, J., Rahimian, F. P., Brindley, D. and Emmitt, S., eds. Proceedings of 9th International Detail Design in Architecture Conference, 2010. Preston, U. K.: University of Central Lancashire (UCLAN), pp. 193-204.

Wyatt, D. and Emmitt, S., 2000. The reference document template in whole life portfolio management. In: Sustainable Product Information. .

Yazicioglu, F. and Emmitt, S., 2013. A comparative analysis of architecture and architectural technology undergraduate degree programmes in the UK. In: Proceedings of Architectural Technology. Sheffield Hallam University, pp. 84-104.

Yazicioglu, F. and Emmitt, S., 2013. Teaching architectural detailing : a comparison between ITU, Turkey and Loughborough University, U. K. In: Proceedings of Detail Design in Architecture 11. Taiwan: Tung Fang Design University, pp. 215-235.

Ye, S. Y., Hsu, M. F., Chang, W. S. and Chen, J. L., 2011. Life cycle assessment of timber components in Taiwan traditional temples. In: Proceedings of the 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12. Vol. 14. Oxford: Elsevier, pp. 2683-2691. (Procedia Engineering)

Zang, J., Liu, S., Eatock Taylor, R. and Taylor, P. H., 2008. Wave run-up and response spectrum for wave scattering from a cylinder. In: Proceedings of the 18th International Offshore and Polar Engineering Conference, 2008. International Society of Offshore and Polar Engineers, pp. 69-74.

Zhang, X. and Du, J., 2014. Ground Factors, Luminaires and Light Pollution Potential in Landscape Lighting Design. In: 1st International Conference on Sustainable Lighting and Light Pollution. Seoul, Korea: , pp. 1-11.

Zheng, L., Paine, K. A. and Dhir, R. K., 2005. Early age temperature rises in GGBS concrete: Part 1: Determination of T1 values. In: Dhir, R. K., Harrison, T. A. and Newlands, M. D., eds. Cement Combinations for Durable Concrete. London: Thomas Telford, pp. 173-182.

Zheng, L., Paine, K. A. and Dhir, R. K., 2008. Effect of weather on early-age temperature rises in concrete. In: Dhir, R. K., Newlands, M. D., Dyer, T. D. and Tang, M. C., eds. Proceedings of the International Conference, Dundee, July 2008: Designing concrete for the visual environment.EP 89 ed. IHS BRE Press, pp. 33-44.

den Otter, A. and Emmitt, S., 2009. Architectural management : reflection on the development of a domain. In: Tzeng, C., Emmitt, S. and Prins, M., eds. Proceedings of the International Symposium CIB-W096, 2009. .

van Rooijen, A., Reniers, A., van Thiel de Vries, J., Blenkinsopp, C. and Mccall, R., 2012. Modelling swash zone sediment transport at Le Truc Vert, France. In: Lynett, P. and McKee Smith, J., eds. 33rd International Conference on Coastal Engineering. Vol. 33 (2012). .

Articles

, 2011. Special Issue : Integrated project delivery. Lean Construction Journal

Adamu, Z., Emmitt, S. and Soetanto, R., 2015. Social BIM:Co-creation with shared situational awareness. ITcon - Technology Strategies for Collaborative Working, 20, pp. 230-252.

Adriaenssens, S. M. and Barnes, M. R., 2001. Tensegrity Spline Beam and Grid Shell Structures. Engineering Structures, 23 (1), pp. 29-36.

Adriaenssens, S., Malek, S., Miki, M. and Williams, C. J. K., 2013. Generating smooth curves in 3 dimensions by minimizing higher order strain energy measures. International Journal of Space Structures, 28 (3-4), pp. 119-126.

Adriaenssens, S., Ney, L., Bodarwe, E. and Williams, C. J. K., 2012. Finding the form of an irregular meshed steel and glass shell based on construction constraints. Journal of Architectural Engineering, 18 (3), 206–213.

Alharbi, M., Emmitt, S. and Demian, P., 2015. Forthcoming. Transferring architectural management into practice : a taxonomy framework. Frontiers of Architectural Research, 4.

Alharbi, M., Emmitt, S. and Demian, P., 2015. What is architectural management? : towards a pragmatic definition. Engineering, Construction and Architectural Management, 22 (2), pp. 151-168.

Almeida, L. P., Masselink, G., Russell, P.E., Davidson, M., Poate, T., Mccall, R., Blenkinsopp, C. and Turner, I.L., 2013. Observations of the swash zone on a gravel beach during a storm using a laser-scanner (Lidar). Journal of Coastal Research, SI 65, pp. 636-641.

Almond, D. P., Budd, C. J., Freitag, M. A., Hunt, G. W., McCullen, N. J. and Smith, N. D., 2013. The origin of power-law emergent scaling in large binary networks. Physica A: Statistical Mechanics and its Applications, 392 (4), pp. 1004-1027.

Amato, A., Musso, S., Pesce, G., Salvitti, E. and Vecchiattini, R., 2004. S. Sisto in Genova : la chiesa dei Re. Dall'analisi archeologica allo studio del comparto urbano. Archeologia dell’Architettura, 9, pp. 167-191.

Ansell, M. P., 1982. Acoustic-Emission from Softwoods in Tension. Wood Science and Technology, 16 (1), pp. 35-57.

Ansell, M. P., 1983. Stake and Socket Fractures in Polyester Fibers. Journal of Materials Science Letters, 2 (2), pp. 47-49.

Ansell, M. P., Hill, C. A. S. and Allgood, C., 1983. Architectural PTFE-Coated Glass Fabrics - Their Structure and Limitations. Textile Research Journal, 53 (11), pp. 692-700.

Anstey, T., 2005. The ambiguities of disegno. The Journal of Architecture, 10 (3), pp. 295-306.

Anstey, T., 2006. The dangers of decorum. arq: Architectural Research Quarterly, 10 (1), pp. 131-139.

Anstey, T., 2003. Theology and Geometry in the façade of S. Maria Novella. Albertiana, Journal of the Societée International Leon Battista Alberti, 06.

Ascione, F., Mancusi, G., Spadea, S., Lamberti, M., Lebon, F. and Maurel-Pantel, A., 2015. Forthcoming. On the flexural behaviour of GFRP beams obtained by bonding simple panels:an experimental investigation. Composite Structures, 131, pp. 55-65.

Ascione, L., Giordano, A. and Spadea, S., 2011. Lateral buckling of pultruded FRP beams. Composites Part B - Engineering, 42 (4), pp. 819-824.

Ascione, L., Mancusi, G. and Spadea, S., 2010. Flexural behaviour of concrete beams reinforced with GFRP bars. Strain, 46 (5), pp. 460-469.

Ascione, L., Mancusi, G. and Spadea, S., 2010. Travi di conglomerato cementizio armate con barre di FRP. L'Edilizia, 163, pp. 64-71.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Buckling failure modes of FRP thin-walled beams. Composites Part B - Engineering, 47, pp. 357-364.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2013. Local buckling behavior of FRP thin-walled beams : a mechanical model. Composite Structures, 98, pp. 111-120.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2014. Macro-scale analysis of local and global buckling behavior of T and C composite sections. Mechanics Research Communications, 58, pp. 105-111.

Ascione, L., Berardi, V. P., Giordano, A. and Spadea, S., 2015. Pre-buckling imperfection sensitivity of pultruded FRP profiles. Composites Part B - Engineering, 72, pp. 206-212.

Ashley, K., Osmani, M., Emmitt, S., Mallinson, H. and Mallinson, M., 2015. Assessing stakeholders perceptions towards the conservation of the built environment of Suakin, Sudan. International Journal of Heritage Studies, 21 (7).

Ashley, K., Osmani, M., Emmitt, S., Mallinson, H. and Mallinson, M., 2015. Forthcoming. Impacts of local cultural dynamics on heritage conservation. Proceedings of the Institution of Civil Engineers: Engineering Sustainability

Ashley, K. S., Osmani, M., Emmitt, S., Mallinson, M. and Mallinson, H., 2015. Assessing stakeholders’ perspectives towards the conservation of the built heritage of Suakin, Sudan. International Journal of Heritage Studies, 21 (7), pp. 674-697.

Ashmore, J. and Richens, P. N., 2001. Computer Simulation in Daylight Design: a comparison. Architectural Science Review, 44 (1), pp. 33-44.

Austin, M.J., Masselink, G., Russell, P.E., Turner, I.L. and Blenkinsopp, C.E., 2011. Alongshore fluid motions in the swash zone of a sandy and gravel beach. Coastal Engineering, 58 (8), pp. 690-705.

Ayyaz, M. S., Ruikar, K. D. and Emmitt, S., 2012. Towards understanding BPR needs for BIM implementation. International Journal of 3-D Information Modeling (IJ3DIM), 1 (4), pp. 18-28.

Baker, J., Bouchlaghem, D. and Emmitt, S., 2013. Categorisation of fire safety management : results of a Delphi Panel. Fire Safety Journal, 59, pp. 37-46.

Bale, C. S. E., McCullen, N. J., Foxon, T. J., Rucklidge, A. M. and Gale, W. F., 2013. Harnessing social networks for promoting adoption of energy technologies in the domestic sector. Energy Policy, 63, pp. 833-844.

Ball, R. J., Allen, G. C., Starrs, G. and McCarter, W. J., 2011. Impedance spectroscopy measurements to study physio-chemical processes in lime-based composites. Applied Physics A Materials Science & Processing, 105 (3), pp. 739-751.

Ball, R. J. and Allen, G. C., 2010. The measurement of water transport in porous materials using impedance spectroscopy. Journal of Physics D: Applied Physics, 43 (10), 105503.

Ball, R. J., Allen, G. C., Carter, M. A., Wilson, M. A., Ince, C. and El-Turki, A., 2012. The application of electrical resistance measurements to water transport in lime–masonry systems. Applied Physics A Materials Science & Processing, 106, pp. 669-677.

Ball, R. J. and Allen, G. C., 2010. Load-dependent deformation and shrinkage in hydraulic lime mortars. International Journal of Sustainable Engineering, 3 (1), pp. 40-46.

Ball, R. J., El-Turki, A., Allen, W. J. and Allen, G. C., 2007. The stress cycling of hydraulic lime mortars. Proceedings of Institution of Civil Engineers, Construction Materials, 160 (2), pp. 57-63.

Ball, R. J., El-Turki, A., Allen, W. J., Nicholson, J. A. and Allen, G. C., 2009. Deformation of NHL3.5 and CL90/PC hybrid mortars. Proceedings of the Institution of Civil Engineers: Construction Materials, 162 (1), pp. 29-35.

Ball, R. J., El-Turki, A. and Allen, G. C., 2011. Influence of carbonation on the load dependent deformation of hydraulic lime mortars. Materials Science and Engineering A, 528 (7-8), pp. 3193-3199.

Ball, R. J., Evans, R., Deven, M. and Stevens, R., 2002. Characterisation of defects observed within the positive grid corrosion layer of the valve regulated lead/acid battery. Journal of Power Sources, 103 (2), pp. 207-212.

Ball, R. J., Evans, R. and Stevens, R., 2002. Characterisation of separator papers for use in valve regulated lead/acid batteries. Journal of Power Sources, 104 (2), pp. 208-220.

Ball, R. J., Evans, R. and Stevens, R., 2002. Finite element (FE) modelling of current density on the valve regulated lead/acid battery positive grid. Journal of Power Sources, 103 (2), pp. 213-222.

Ball, R. J., Evans, R., Thacker, E. L. and Stevens, R., 2003. Effect of valve regulated lead/acid battery positive paste carbon fibre additive. Journal of Materials Science, 38 (14), pp. 3013-3017.

Ball, R. J., Kurian, R., Evans, R. and Stevens, R., 2002. Failure mechanisms in valve regulated lead/acid batteries for cyclic applications. Journal of Power Sources, 109 (1), pp. 189-202.

Ball, R. J., Kurian, R., Evans, R. and Stevens, R., 2002. Study of valve-regulated lead/acid batteries manufactured with different separator papers. Journal of Power Sources, 104 (2), pp. 234-240.

Ball, R. J. and Stevens, R., 2002. Characterisation of Ce0.8Gd0.2O1.9/3Y-TZP composite electrolytes - Effects of 3Y-TZP particle treatment. Journal of Materials Science, 37 (19), pp. 4137-4144.

Ball, R. J. and Stevens, R., 2003. Characterisation of Ce0.8Gd0.2O1.9/3Y-TZP composite electrolytes-effects of weight % 3Y-TZP particles. Journal of Materials Science, 38 (7), pp. 1413-1423.

Ball, R. J. and Stevens, R., 2003. Design aspects of the valve regulated lead/acid battery positive electrode. Journal of Power Sources, 113 (2), pp. 228-232.

Barclay, M., Kang, J. and Sharples, S., 2012. Combining noise mapping and ventilation performance for non-domestic buildings in an urban area. Building and Environment, 52, pp. 68-76.

Barclay, M., Sharples, S., Kang, J. and Watkins, R., 2012. The natural ventilation performance of buildings under alternative future weather projections. Building Services Engineering Research and Technology, 33 (1), pp. 35-50.

Barnes, M.R., Adriaenssens, S. and Krupka, M., 2013. A novel torsion/bending element for dynamic relaxation modeling. Computers and Structures, 119, pp. 60-67.

Barnes, M., 1994. Form and stress engineering of tension structures. Structural Engineering Review, 6 (3).

Barnes, M. R., 1999. Form finding and analysis of tension structures by dynamic relaxation. International Journal of Space Structures, 14 (2), pp. 89-104.

Barron, M., 2001. Late lateral energy fractions and the envelopment question in concert halls. Applied Acoustics, 62, 185--202.

Barron, M., 2005. Using the standard on objective measures for concert auditoria, ISO3382, to give reliable results. Acoustical Science and Technology, 26, 162--169.

Barron, M. and Coleman, S., 2001. Measurements of the absorption by auditorium seating a model study. Journal of Sound and Vibration, 239, 573--587.

Barron, M. and Dammerud, J., 2006. Stage acoustics in concert halls - early investigations. Proceedings of the Institute of Acoustics, 28 (2), pp. 1-12.

Barron, M., 1997. 21 years of acoustic scale model testing. Proceedings of the Institute of Acoustics, 19, pp. 67-80.

Barron, M., 1997. Acoustic Scale Model Testing over 21 Years. Acoustics Bulletin, 22 (3), pp. 5-12.

Barron, M., 1998. Early decay times in the Christchurch and Wellington Concert halls, New Zealand. Journal of the Acoustical Society of America (JASA), 103 (4), pp. 2229-2231.

Barron, M., 2008. Science and music: Raising the roof. Nature, 453 (7197), pp. 859-860.

Barron, M., 1999. Spatial Impression and envelopment in concert halls. Proceedings of the Institute of Acoustics, 21 (6), pp. 163-170.

Bawcombe, J., Harris, R., Walker, P. and Ansell, M., 2015. The quality of Douglas-fir grown in the United Kingdom. Proceedings of the Institution of Civil Engineers: Construction Materials, 168 (3), pp. 99-109.

Bejarano, M., Heath, A. and Harvey, J., 2003. A Low-Cost High-Performance Alternative for Controlling a Servo-Hydraulic System for Triaxial Resilient Modulus Apparatus. ASTM Special Technical Publications, 1437, pp. 129-140.

Benente, F., Parodi, V., Pesce, G., Garbarino, G. B. and Lassa, S., 1999. Progetto d'indagine dell'insediamento abbandonato di Pian dei Costi (Borzonasca - GE). Campagna d'indagine 1999. Notizie preliminari. Archeologia Postmedievale, 3, pp. 21-30.

Bernardini, A., D'Ayala, D. F., Meroni, F., Pessina, V. and Valluzzi, M. R., 2008. Damage scenarios in the Vittorio Veneto town center (NE Italy). Bollettino di Geofisica Teorica e Applicata, 49 (3-4), pp. 505-512.

Bernardini, A., D'Ayala, D. F., Modena, C., Speranza, E. and Valluzzi, M. R., 2008. Vulnerability assessment of the historical masonry building typologies of Vittorio Veneto (NE Italy). Bollettino di Geofisica Teorica e Applicata, 49 (3-4), pp. 463-484.

Bhooshan, S., Bhooshan, V., Sayed, M., Chandra, S., Richens, P. and Shepherd, P., 2015. Forthcoming. Applying dynamic relaxation techniques to form-find and manufacture curve-crease folded panels. Simulation : Transactions of The Society for Modeling and Simulation International

Biagini, M., Casale, M., Castagnasso, S., Costa, S., Mannoni, T., Martini, S. and Pesce, G., 2004. Indagini archeologiche in alta val Trebbia e alta valle Scrivia. Lo scavo del castello di Donnetta (GE). Relazione preliminaire sulla prima campagna di scavo. Ligures, 2, pp. 85-106.

Bisanda, E. T. N. and Ansell, M. P., 1992. Properties of Sisal-CNSL Composites. Journal of Materials Science, 27 (6), pp. 1690-1700.

Bisanda, E. T. N. and Ansell, M. P., 1991. The Effect of Silane Treatment on the Mechanical and Physical-Properties of Sisal-Epoxy Composites. Composites Science and Technology, 41 (2), pp. 165-178.

Blakeborough, A., Williams, M. S., Darby, A. and Williams, D. M., 2001. The development of real-time substructure testing. Philosophical Transactions of the Royal Society A - Mathematical, Physical and Engineering Sciences, 359, p. 1869.

Blenkinsop, T. and Walker, P., 1994. Geological Influences on the Location and Construction of Great Zimbabwe. Transactions of the Zimbabwe Scientific Association, 68, pp. 25-31.

Blenkinsopp, C.E. and Chaplin, J.R., 2010. Bubble size measurements in breaking waves using optical fiber phase detection probes. IEEE Journal of Oceanic Engineering, 35 (2), pp. 388-401.

Blenkinsopp, C.E. and Chaplin, J.R., 2008. The effect of relative crest submergence on wave breaking over submerged slopes. Coastal Engineering, 55 (12), pp. 967-974.

Blenkinsopp, C.E. and Chaplin, J.R., 2007. Void fraction measurements in breaking waves. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 463 (2088), pp. 3151-3170.

Blenkinsopp, C.E., Mole, M.A., Turner, I.L. and Peirson, W.L., 2010. Measurements of the time-varying free-surface profile across the swash zone obtained using an industrial LIDAR. Coastal Engineering, 57 (11-12), pp. 1059-1065.

Blenkinsopp, C.E., Turner, I.L., Allis, M.J., Peirson, W.L. and Garden, L.E., 2012. Application of LiDAR technology for measurement of time-varying free-surface profiles in a laboratory wave flume. Coastal Engineering, 68, pp. 1-5.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.E., 2011. Can standard energetics models be used to predict net cross-shore sediment flux at the beach face? Australian Journal of Civil Engineering, 9 (1), pp. 19-34.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.E., 2011. Swash zone sediment fluxes:field observations. Coastal Engineering, 58 (1), pp. 28-44.

Blenkinsopp, C.E., Turner, I.L., Masselink, G. and Russell, P.E., 2010. Validation of volume continuity method for estimation of cross-shore swash flow velocity. Coastal Engineering, 57 (10), pp. 953-958.

Boato, A., Martini, S. and Pesce, G., 2002. Ricerche sui terrazzamenti delle Cinque Terre. Notiziario di Archeologia Medievale, 75, pp. 7-8.

Bonal, J., Donohue, S. and McNally, C., 2012. Wavelet analysis of bender element signals. Geotechnique, 62 (3), pp. 243-252.

Bonfield, P. W. and Ansell, M. P., 1991. Fatigue Properties of Wood in Tension, Compression and Shear. Journal of Materials Science, 26 (17), pp. 4765-4773.

Bonfield, P. W., Hacker, C. L., Ansell, M. P. and Dinwoodie, J. M., 1994. Fatigue and Creep of Chipboard .1. Fatigue at R=0.01. Wood Science and Technology, 28 (6), pp. 423-435.

Boon, D., Fraser, S., Free, M., Grant, D., Mason, A., Paganoni, S., Wilkinson, S. and Williams, E., 2013. Observations and implications of damage from the magnitude Mw6.3 Christchurch, New Zealand earthquake of 22 February 2011. Bulletin of Earthquake Engineering, 11 (1), pp. 107-140.

Boura, O., Diamanti, E. K., Grammatikos, S. A., Gournis, D. and Paipetis, A. S., 2013. Carbon nanotube growth on high modulus carbon fibres:Morphological and interfacial characterization. Surface and Interface Analysis, 45 (9), pp. 1372-1381.

Bradley, A., Chang, W.-S. and Harris, R., 2015. The effect of drying on timber frame connections post flooding. Proceedings of the Institution of Civil Engineers: Construction Materials:, 168 (3), pp. 144-157. Item availability may be restricted.

Brennan, J., Pedreschi, R., Walker, P. and Ansell, M., 2013. The potential of advanced textiles for fabric formwork. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 229-237.

Briggs, K. M., Smethurst, J. A., Powrie, W., O'Brien, A. S. and Butcher, D. J. E., 2013. Managing the extent of tree removal from railway earthwork slopes. Ecological Engineering, 61 (C), pp. 690-696.

Briggs, K. M., Smethurst, J. A., Powrie, W. and O'Brien, A. S., 2013. Wet winter pore pressures in railway embankments. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 166 (5), pp. 451-465.

Bryant, L., Gantzer, P. A. and Little, J. C., 2011. Increased sediment oxygen uptake caused by oxygenation-induced hypolimnetic mixing. Water Research, 45 (12), pp. 3692-3703.

Bryant, L., Hsu-Kim, H., Gantzer, P. A. and Little, J. C., 2011. Solving the problem at the source:Controlling Mn release at the sediment-water interface via hypolimnetic oxygenation. Water Research, 45 (19), pp. 6381-6392.

Bryant, L., Little, J. C. and Bürgmann, H., 2012. Response of sediment microbial community structure in a freshwater reservoir to manipulations in oxygen availability. FEMS Microbiology Ecology, 80 (1), pp. 248-263.

Bryant, L., Lorrai, C., McGinnis, D. F., Brand, A., Wüest, A. and Little, J. C., 2010. Variable sediment oxygen uptake in response to dynamic forcing. Limnology and Oceanography, 55 (2), pp. 950-964.

Bryant, L., McGinnis, D. F., Lorrai, C., Brand, A., Little, J. C. and Wüest, A., 2010. Evaluating oxygen fluxes using microprofiles from both sides of the sediment-water interface. Limnology and Oceanography, 8 (Nov), pp. 610-627.

Bucur, V., Ansell, M. P., Barlow, C. Y., Pritchard, J., Garros, S. and Deglise, X., 1998. Physical methods for characterizing wood composite panel products. Holzforschung, 52 (5), pp. 553-561.

Burton, R., Dickson, M. and Harris, R., 1998. The Use of Roundwood Thinnings in Buildings : A Case Study. Building Research and Information, 26 (2), pp. 76-93.

Cagnana, A., Aurilia, G., Baldassarri, M., Ghidotti, P., Giovinazzo, R., Nervi, C., Pesce, G., Piccardi, E. and Raffelini, C., 2001. Gli scavi nel castello di Celasco (Monte Bardellone, La Spezia). Relazione preliminare sulle campagne 1996-1999. Archeologia Medievale, 28, pp. 147-148.

Cagnana, A., Ghidotti, P. and Pesce, G., 2001. Terza campagna di scavi nel sito incastellato di Monte Bardellone. Notiziario di Archeologia Medievale, 73, pp. 10-11.

Calabria, J., Vasconcelos, W. L. and Boccaccini, A. R., 2009. Microstructure and chemical degradation of adobe and clay brick. Ceramics International, 35 (2), pp. 665-671.

Calabria, J., Vasconcelos, W. L., Doni, D. J., Chater, R., McPhail, D. and Boccaccini, A. R., 2010. Synthesis of sol-gel titania bactericide coatings on adobe brick. Construction and Building Materials, 24 (3), pp. 384-389.

Carfrae, J., De Wilde, P., Littlewood, J., Goodhew, S. and Walker, P., 2011. Development of a cost effective probe for the long term monitoring of straw bale buildings. Building and Environment, 46 (1), pp. 156-164.

Chang, W.-S., Murakami, S., Komatsu, K., Araki, Y., Shrestha, K., Omori, T. and Kainuma, R., 2013. Technical note: Potential to use shape memory alloy in timber dowel-type connections. Wood and Fiber Science, 45 (3), pp. 330-334.

Chang, W. S., Chen, C. J. and Hsu, M. F., 2004. Examining types of timber joints in traditional Chuan-Dou timber frame by stress wave method. Journal of Architecture, 50, pp. 1-13.

Chang, W. S. and Hsu, M. F., 2005. Mechanical characteristics of traditional go-dou and stepped dovetail timber connections in Taiwan. Taiwan Journal of Forest Science, 20 (1), pp. 61-71.

Chang, W. S., Hsu, M. F. and Komatsu, K., 2006. Rotational performance of traditional Nuki joints with gap I : theory and verification. Journal of Wood Science, 52 (1), pp. 58-62.

Chang, W. S., Hsu, M. F., Komatsu, K. and Chen, W. J., 2007. On mechanical behavior of traditional timber shear wall in Taiwan II : simplified calculation and experimental verification. Journal of Wood Science, 53 (1), pp. 24-30.

Chang, W. S., Komatsu, K., Hsu, M. F. and Chen, W. J., 2007. On mechanical behavior of traditional timber shear wall in Taiwan I : background and theory derivation. Journal of Wood Science, 53 (1), pp. 17-23.

Chang, W.-S., 2015. Forthcoming. Repair and reinforcement of timber columns and shear walls - A review. Construction and Building Materials

Chang, W.-S. and Betts, R., 2015. Forthcoming. Dowel-type connections with multiple densified bamboo nails. Journal of Materials in Civil Engineering

Chang, W.-S., Hsu, M.-F. and Komatsu, K., 2011. A new proposal to reinforce planked timber shear walls. Journal of Wood Science, 57 (6), pp. 493-500.

Chang, W.-S. and Nearchou, N., 2015. Hot-pressed dowels in bonded-in rod timber connections. Wood and Fiber Science, 47 (2), pp. 199-208.

Chang, W.-S., Shanks, J., Kitamori, A. and Komatsu, K., 2009. The structural behaviour of timber joints subjected to bi-axial bending. Earthquake Engineering and Structural Dynamics, 38 (6), pp. 739-757.

Chang, W.-S., Thomson, A., Harris, R., Walker, P. and Shanks, J., 2011. Development of all-wood connections with plywood flitch plate and oak pegs. Advances in Structural Engineering, 14 (2), pp. 123-132.

Charrington, H. J., 2013. Harry Charrington on Aalto's relationship with America. Architectural Research Quarterly, 17 (1), pp. 89-91.

Charrington, H., 2012. Alvar Aalto. Architectural Review, 1384, pp. 110-111.

Charrington, H., 2011. Coordinating method and art: Alvar Aalto at play. Architectural History: Journal of the Society of Architectural Historians of Great Britain, 54, pp. 309-345.

Charrington, H., 2010. Nordic architects write. Architectural Theory Review, 15 (3), pp. 396-397.

Charrington, H., 2010. Not a locked box: the everyday art of the Aalto atelier. Architectural Research Quarterly, 14 (3), pp. 255-266.

Charrington, H., 2003. The dignity of the everyday. Architectural Research Quarterly, 7 (2), pp. 100-101.

Charrington, H., Leitch, D. and Tavernor, B., 1995. City thresholds. European Association for Architectural Education (EAAE) Proceedings

Charrington, H., Long, K. and Rattenbury, K., 2006. Cambridge, a conversation. Scroope, 17, xxiv-xxxv.

Cheah, J. S. J., Walker, P., Heath, A. and Morgan, T. K. K. B., 2012. Evaluating shear test methods for stabilised rammed earth. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (6), pp. 325-334.

Chiles, S. and Barron, M., 2004. Sound level distribution and scatter in proportionate spaces. Journal of the Acoustical Society of America, 116, 1585--1595.

Chinowsky, P., Hayles, C., Schweikert, A., Strzepek, N., Strzepek, K. and Schlosser, C. A., 2011. Climate change : Comparative impact on developing and developed countries. Engineering Project Organization Journal, 1 (1), pp. 67-80.

Choi, M. C. and Ibell, T., 2002. Anchorage zones for FRP-prestressed concrete structures. The Structural Engineer, 80 (20), p. 17.

Chouchoulas, O. and Day, A., 2007. Design exploration using a shape grammar with a genetic algorithm. Open House International, 32 (2), pp. 26-35.

Ciancio, D., Jacquin, P. and Walker, P., 2013. Advances on the assessment of soil suitability for rammed earth. Construction and Building Materials,, 42, pp. 40-47.

Clark, R. A. and Ansell, M. P., 1986. Jute and Glass-Fiber Hybrid Laminates. Journal of Materials Science, 21 (1), pp. 269-276.

Claxton, M., Hart, R. A., McCombie, P. F. and Walker, P., 2005. Rigid block distinct element modeling of dry-stone retaining walls in plane-strain. Journal of Geotechnical and Geoenvironmental Engineering, 131 (3), pp. 381-389.

Coley, D. A., Howard, M. and Winter, M., 2011. Food miles: time for a re-think? British Food Journal, 113 (7), pp. 919-934.

Collery, D. J., Paine, K. A. and Dhir, R. K., 2015. Establishing rational use of recycled aggregates in concrete : a performance-related approach. Magazine of Concrete Research, 67 (11), pp. 559-574. Item availability may be restricted.

Collier, N. C., Wilson, M. A., Carter, M. A., Hoff, W. D., Hall, C., Ball, R. J., El-Turki, A. and Allen, G. C., 2007. Theoretical development and validation of a Sharp Front model of the dewatering of a slurry by an absorbent substrate. Journal of Physics D: Applied Physics, 40, pp. 4049-4054.

Collins, L., Natarajan, S. and Levermore, G., 2010. Climate change and future energy consumption in UK housing stock. Building Services Engineering Research and Technology, 31 (1), pp. 75-90.

Comartin, C., Brzev, S., Naeim, F., Greene, M., Blondet, M., Cherry, S., D'Ayala, D. F., Farsi, M., Jain, S. K. and Pantelic, J., 2004. A Challenge to Earthquake Engineering Professionals. Earthquake Spectra, 20, 1049--1056.

Cook, D., Ledbetter, S., Ring, S. and Wentzel, F., 2000. Masonry crack damage: its origins, diagnosis, philosophy and a basis for repair. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 140, pp. 39-50.

Copping, A. G., 2004. Introducing a Protocol for an Integrated Fire Safety Evaluation Procedure for Historic Buildings. International Journal of Performance Based Fire Codes, 6, 72--77.

Costa, S. and Pesce, G. L. A., 2009. 3° workshop : 'Open Source Free Software e Open Format nei processi di ricerca archeologica'. Notiziario di Archeologia Medievale, 78, pp. 17-19.

Cruise, R. B. and Gardner, L., 2006. Effects of the production route on the behaviour of stainless steel. The Structural Engineer, 84 (22), 18 and 21-22.

Cruise, R. B. and Gardner, L., 2006. Measurement and prediction of geometric imperfections in structural stainless steel members. Structural Engineering and Mechanics, 24 (1), pp. 63-89.

Cruise, R. B. and Gardner, L., 2008. Residual stress analysis of structural stainless steel sections. Journal of Constructional Steel Research, 64 (3), pp. 352-366.

Cruise, R. B. and Gardner, L., 2008. Strength enhancements induced during cold forming of stainless steel sections. Journal of Constructional Steel Research, 64 (11), pp. 1310-1316.

D'Ayala, D., 2003. A summary of the report Seismic vulnerability of historic buildings in Lalitpur, Nepal. Earthquake Hazard Centre Newsletter, 7 (1).

D'Ayala, D. and Smars, P., 2003. Architectural and Structural Modelling for the Conservation of Cathedrals. Journal of Architectural Conservation, 9, 51--72.

D'Ayala, D. and Speranza, E., 2003. Definition of Collapse Mechanisms and Seismic Vulnerability of Historic Masonry Buildings. Earthquake Spectra, 19, 479--509.

D'Ayala, D. F., 2005. Force and Displacement Based Vulnerability Assessment for Traditional Buildings. Bulletin of Earthquake Engineering, 3, 235--265.

D'Ayala, D. F. and Copping, A., 2007. Holistic Approach to the Rehabilitation of Foundouks in Morocco. APT Bulletin: The Journal of Perservation Technology, 38.

D'Ayala, D. F. and Wang, H., 2006. Conservation practice of chinese timber structures. Journal of Architectural Conservation, 12, p. 7.

D'Ayala, D. and Ansal, A., 2012. Non linear push over assessment of heritage buildings in Istanbul to define seismic risk. Bulletin of Earthquake Engineering, 10 (1), pp. 285-306.

D'Ayala, D. and Dolce, M., 2011. L'Aquila earthquake: Seismic sequence of 6th April 2009, Abruzzo, Italy. Bulletin of Earthquake Engineering, 9 (1), pp. 1-10.

D'Ayala, D. and Shi, Y. N., 2011. Modeling masonry historic buildings by multi-body dynamics. International Journal of Architectural Heritage, 5 (4-5), pp. 483-512.

D'Ayala, D., Spence, R., Oliveira, C. and Pomonis, A., 1997. Earthquake Loss Estimation for Europe's Historic Town Centres. Earthquake Spectra, 13 (4), pp. 773-793.

D'Ayala, D., Worth, J. and Riddle, O., 2009. Realistic shear capacity assessment of infill frames: Comparison of two numerical procedures. Engineering Structures, 31 (8), pp. 1745-1761.

D'Ayala, D. F. and Paganoni, S., 2011. Assessment and analysis of damage in L'Aquila historic city centre after 6th April 2009. Bulletin of Earthquake Engineering, 9 (1), pp. 81-104.

D'Ayala, D. F. and Tomasoni, E., 2011. Three-dimensional analysis of masonry vaults using limit state analysis with finite friction. International Journal of Architectural Heritage, 5 (2), pp. 140-171.

D'Ayala, D. F. and Tsai, P. H., 2008. Seismic Vulnerability of Dieh-Dou Timber structures in Taiwan. Engineering Structures, 30 (8), pp. 2101-2113.

Dale, A. W., Sommer, S., Lomnitz, U., Montes, I., Treude, T., Liebetrau, V., Gier, J., Hensen, C., Dengler, M., Stolpovsky, K., Bryant, L. D. and Wallmann, K., 2015. Organic carbon production, mineralisation and preservation on the Peruvian margin. Biogeosciences, 12 (5), pp. 1537-1559.

Dalziel, S. B., Patterson, M. D., Caulfield, C. P. and Coomaraswamy, I. A., 2008. Mixing efficiency in high-aspect-ratio Rayleigh-Taylor experiments. Physics of Fluids, 20, 065106.

Dalziel, S. B., Patterson, M. D., Caulfield, C. P. and Le Brun, S., 2011. The structure of low Froude number lee waves over an isolated obstacle. Journal of Fluid Mechanics, 689, pp. 3-31.

Dammerud, J. J., Barron, M. F. and Kahle, E., 2011. Objective assessment of acoustic conditions for symphony orchestras. Building Acoustics, 18 (3-4), pp. 207-219.

Dammerud, J. J. and Barron, M., 2010. Attenuation of direct sound and the contributions of early reflections within symphony orchestras. The Journal of the Acoustical Society of America, 128 (4), pp. 1755-1765.

Dammerud, J. J. and Barron, M., 2008. Concert hall stage acoustics from the perspective of performers and physical reality. Proceedings of the Institute of Acoustics, 30 (3), pp. 26-36.

Darby, A. P., Blakeborough, A. and Williams, M. S., 2001. Improved control algorithm for real-time substructure testing. Earthquake Engineering & Structural Dynamics, 30, p. 446.

Darby, A. P. and Pellegrino, S., 1999. Modeling and control of a flexible structure incorporating inertial slip-stick actuators. Journal of Guidance, Control, and Dynamics, 22 (1), pp. 36-42.

Darby, A. P., Williams, M. S. and Blakeborough, A., 2002. Stability and delay compensation for real-time substructure testing. Journal of Engineering Mechanics, 128, 1276--1284.

Darby, A. P. and Pellegrino, S., 1997. Inertial stick-slip actuator for active control of shape and vibration. Journal of Intelligent Material Systems and Structures, 8 (12), pp. 1001-1011.

Darby, A., Ibell, T., Clarke, J., Denton, S., Farmer, N. and Luke, S., 2004. Strengthening concrete structures using fibre composites. Proceedings of the Institution of Civil Engineers - Bridge Engineering, 157 (3), pp. 123-129.

Darby, A. P., Denton, S. R. and Ibell, T. J., 2009. Influence of changes in cross section on the effectiveness of externally bonded FRP strengthening. Journal of Composites for Construction, 13 (3), pp. 208-216.

Darby, A., Blakeborough, A. and Williams, M. S., 1999. Real-time substructure tests using hydraulic actuator. Journal of Engineering Mechanics, 125 (10), pp. 1133-1139.

Davies, P. J., Emmitt, S. and Firth, S. K., 2014. Challenges for capturing and assessing initial embodied energy : a contractor’s perspective. Construction Management and Economics, 32 (3), pp. 290-308.

Davies, P. J., Emmitt, S. and Firth, S. K., 2015. Delivering improved initial embodied energy efficiency during construction. Sustainable Cities and Society, 14, pp. 267-279.

Davies, P. J., Emmitt, S. and Firth, S. K., 2013. On-site energy management challenges and opportunities : a contractor's perspective. Building Research and Information, 41 (4), pp. 450-468.

Dawson, A.R., Dehdezi, P.K., Hall, M.R., Wang, J. and Isola, R., 2012. Enhancing thermal properties of asphalt materials for heat storage and transfer applications. Road Materials and Pavement Design, 13 (4), pp. 784-803.

Day, A., 2002. Urban visualization and public inquiries: the case of the Heron Tower, London. Architectural Research Quarterly, 6 (4), pp. 363-372.

Day, A. and Ab Rahman, R., 2006. Physical or digital: alternative approaches to modelling in a participatory design environment. International Journal of Architectural Computing, 4 (4), pp. 57-70.

Day, A., Bourdakis, V. and Robson, J., 1996. Living with a virtual city. Architectural Research Quarterly, 2 (Autumn), pp. 84-91.

Day, A. and Hart, V., 2007. The architectural guidebook : from Palladio to Pod. Architectural Research Quarterly, 11 (2), pp. 151-158.

Day, T., Pritchard, J. and Heath, A., 2010. Sowing the seeds of enhanced academic writing support in a research-intensive university. Educational Developments, 11 (3), pp. 18-21.

De Wilde, P. and Coley, D., 2012. Editorial article: The Implications of a Changing Climate for Buildings. Building and Environment, 56, pp. 1-7.

Dhir, R. K., Dyer, T. D. and Paine, K. A., 2006. Appropriate use of sustainable construction materials. Concrete, 40 (9), pp. 20-23.

Dhir, R. K., McCarthy, M. J. and Paine, K. A., 2005. Engineering property and structural design relationships for new and developing concretes. Materials and Structures, 38 (1), pp. 1-9.

Dhir, R. K., Paine, K. A. and Dyer, T. D., 2004. Recycling construction and demolition wastes in concrete. Concrete, 38 (3), pp. 25-28.

Dhir, R. K., Paine, K. A., Dyer, T. D. and Tang, M. C., 2004. Value-added recycling of domestic, industrial and construction arisings as concrete aggregate. Concrete Engineering International, 8 (1), pp. 43-48.

Dhir, R. K., Paine, K. A. and Moroney, R. C., 2003. Recycling of used tyres in concrete. Concrete, 37 (9), pp. 47-48.

Dhir, R. K., Zheng, L. and Paine, K. A., 2008. Measurement of early-age temperature rises in concrete made with blended cements. Magazine of Concrete Research, 60 (2), pp. 109-118.

Dhir, R. K. and Paine, K. A., 2010. Value added sustainable use of recycled and secondary aggregates in concrete. Indian Concrete Journal, 84 (3), pp. 7-26.

Dickens, J. and Walker, P. J., 1996. Use of distinct element model to simulate behaviour of dry-stone walls. Structural Engineering Review, 8 (2/3), pp. 187-199.

Dimoudi, A. and Nikolopoulou, M., 2003. Vegetation in the Urban Environment: Microclimatic Analysis and Benefits. Energy and Buildings, 35 (1), pp. 69-76.

Donohue, S., Gavin, K. and Tolooiyan, A., 2011. Geophysical and geotechnical assessment of a railway embankment failure. Near Surface Geophysics, 9 (1), pp. 33-44.

Donohue, S. and Long, M., 2008. Assessment of an MASW approach incorporating discrete particle modeling. Journal of Environmental and Engineering Geophysics, 13 (2), pp. 57-68.

Donohue, S. and Long, M., 2010. Assessment of sample quality in soft clay using shear wave velocity and suction measurements. Geotechnique, 60 (11), pp. 883-889.

Donohue, S. and Long, M., 2009. Suction measurements as indicators of sample quality in soft clay. Geotechnical Testing Journal, 32 (3), pp. 286-296.

Donohue, S., Long, M., O'Connor, P., Helle, T. E., Pfaffhuber, A. A. and Romoen, M., 2012. Multi-method geophysical mapping of quick clay. Near Surface Geophysics, 10 (3), pp. 207-219.

Donohue, S., O'Sullivan, C. and Long, M., 2009. Particle breakage during cyclic triaxial loading of a carbonate sand. Geotechnique, 59 (5), pp. 477-482.

Du, J. and Sharples, S., 2012. The assessment of vertical daylight factors across the walls of atrium buildings, Part 1:Square atria. Lighting Research and Technology, 44 (2), pp. 109-123.

Du, J. and Sharples, S., 2010. Daylight in atrium buildings : Geometric shape and vertical sky components. Lighting Research and Technology, 42 (4), pp. 385-397.

Du, J. and Sharples, S., 2012. The assessment of vertical daylight factors across the walls of atrium buildings, Part 2:Rectangular atria. Lighting Research and Technology, 44 (2), pp. 124-138.

Du, Q., Yang, R. and Ledbetter, S., 2012. The information sources in building cladding supply chain. Research Journal of Applied Sciences, Engineering and Technology, 4 (21), pp. 4449-4452.

Du, Q., Yang, J. and Ledbetter, S., 2011. Communication in the cladding supply chain. Advanced Materials Research, 255-260, pp. 3898-3902.

Eames, M., Kershaw, T. J. and Coley, D., 2011. On the creation of future probabilistic design weather years from UKCP09. Building Services Engineering Research and Technology, 32 (2), pp. 127-142.

Eames, M., Kershaw, T. J. and Coley, D., 2011. The creation of wind speed and direction data for the use in probabilistic future weather files. Building Services Engineering Research and Technology, 32 (2), pp. 143-158.

Eames, M., Kershaw, T. J. and Coley, D., 2012. The appropriate spatial resolution of future weather files for building simulation. Journal of Building Performance Simulation, 5 (6), pp. 347-358.

Edwards, D. D., Allen, G. C., Ball, R. J. and El-Turki, A., 2007. Pozzolanic properties of glass fines in lime mortars. Advances in Applied Ceramics, 106 (6), pp. 309-313.

El-Turki, A., Ball, R. J. and Allen, G. C., 2006. Chemical and mechanical properties of lime-based mortar materials. Journal of the Building Limes Forum, 13, pp. 71-87.

El-Turki, A., Ball, R. J. and Allen, G. C., 2007. The influence of relative humidity on structural and chemical changes during carbonation of hydraulic lime. Cement and Concrete Research, 37 (8), pp. 1233-1240.

El-Turki, A., Ball, R. J., Wang, C. F. and Allen, G. C., 2008. Effects of additives in lime-based mortar and paste. Journal of the Building Limes Forum, 15, pp. 48-56.

El-Turki, A., Carter, M. A., Wilson, M. A., Ball, R. J. and Allen, G. C., 2009. A microbalance study of the effects of hydraulicity and sand grain size on carbonation of lime and cement. Construction and Building Materials, 23 (3), pp. 1423-1428.

El-Turki, A., Ball, R. J., Carter, M. A., Wilson, M. A., Ince, C. and Allen, G. C., 2010. Effect of dewatering on the strength of lime and cement mortars. Journal of the American Ceramic Society, 93 (7), pp. 2074-2081.

El-Turki, A., Ball, R. J., Holmes, S., Allen, W. J. and Allen, G. C., 2010. Environmental cycling and laboratory testing to evaluate the significance of moisture control for lime mortars. Construction and Building Materials, 24 (8), pp. 1392-1397.

El. Reifi, M. H. and Emmitt, S., 2013. Perceptions of lean design management. Architectural Engineering and Design Management, 9 (3), pp. 195-208.

Elliott, K. S., Altamimi, A. and Paine, K. A., 2001. Precast concrete floors: The future. Concrete, 35 (9), pp. 56-59.

Emmitt, S., 2008. Design management : added value for sustainability. De Ontwerpmanager, 3, pp. 26-29.

Emmitt, S., 2009. Design managment for sustainability. Architectural Engineering and Design Management, 5 (1/2).

Emmitt, S., 2007. Editorial : Special Issue - Aspects of Building Design Management. Architectural Engineering and Design Management, 3 (1), pp. 3-4.

Emmitt, S., 2005. Integrating teaching and research in an architectural technology undergraduate model. Journal of Engineering, Design and Technology, 3 (2), pp. 164-179.

Emmitt, S., 2011. Lean design management. Architectural Engineering and Design Management, 7 (2), pp. 67-69.

Emmitt, S., 2001. Observing the act of specification. Design Studies, 22 (5), pp. 397-408.

Emmitt, S., 2006. Selection and specification of building products : implications for design managers. Architectural Engineering and Design Management, 2 (3), pp. 176-186.

Emmitt, S., 2011. Technological design in a multi-disciplinary, sensory context. Techne. Journal of Technology for Architecture and Environment, 2, pp. 44-51.

Emmitt, S., 2001. Technological gatekeepers : the management of trade literature by design offices. Engineering, Construction and Architectural Management, 8 (1), pp. 2-8.

Emmitt, S., Pasquire, C. and Mertia, B., 2012. Is good enough “making do”? An investigation of inappropriate processing in a small design and build company. Construction Innovation: Information, Process, Management, 12 (3), pp. 369-383.

Erkal, A., D'Ayala, D. and Sequeira, L., 2012. Assessment of wind-driven rain impact, related surface erosion and surface strength reduction of historic building materials. Building and Environment, 57, pp. 336-348.

Erkal, A., Tezcan, S. S. and Laefer, D. F., 2011. Assessment and code considerations for the combined effect of seismic base-isolation and viscoelastic dampers. ISRN Civil Engineering, 2011, 861451.

Eshwar, N., Nanni, A. and Ibell, T. J., 2008. Performance of two anchor systems of externally bonded fiber-reinforced polymer laminates. ACI Materials Journal, 105 (1), pp. 72-80.

Eshwar, N., Ibell, T. and Nanni, A., 2005. Effectiveness of CFRP strengthening on curved soffit RC beams. Advances in Structural Engineering, 8 (1), pp. 55-68.

Evernden, M., Darby, A. P. and Ibell, T. J., 2013. Engaging students with e-activities. The Structural Engineer, 91 (8), pp. 20-23.

Evernden, M. and Mottram, J., 2006. Characterisation of Unistrut connection method with pultruded fiber reinforced polymer channels. Journal of Materials in Civil Engineering, 18 (5), pp. 700-709.

Evernden, M. and Mottram, T., 2011. A case for houses in the UK to be constructed of fibre reinforced polymer components. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (1), pp. 3-13.

Evernden, M. and Mottram, T., 2012. Double lap single and double bolt tension joints in PFRP leg angle connections. Submitted to: ICE Construction Materials

Evernden, M. and Mottram, T., 2012. A case for houses to be constructed of FRP components. ICE Construction Materials, 165 (CM1), 1000002.

Evins, R., Joyce, S.C., Pointer, P., Sharma, S., Vaidyanathan, R. and Williams, C., 2012. Multi-objective design optimisation:Getting more for less. Proceedings of the Institution of Civil Engineers - Civil Engineering, 165 (5), pp. 5-10.

Falzone, P., Mannoni, T., Pesce, G., Pittaluga, P., Ricci, R. and Vecchiattini, R., 2001. I palazzi di via Garibaldi. Arkos Speciale G8, 2 (1), pp. 50-61.

Fasihnikoutalab, M., Westgate, P., Huat, B. B. K., Asadi, A., Ball, R., Nahazanan, H. and Singh, P., 2015. New Insights into Potential Capacity of Olivine in Ground Improvement. Electronic Journal of Geotechnical Engineering, 20 (8), pp. 2137-2148.

Fitzgerald, C. J., Taylor, P. H., Eatock Taylor, R., Grice, J. and Zang, J., 2014. Phase manipulation and the harmonic components of ringing forces on a surface-piercing column. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 470 (2168), 20130847.

Fodde, E., 2006. Analytical Methods for the Conservation of the Buddhist Temple II of Krasnaya Rechka, Kyrgyzstan. Conservation and Management of Archaeological Sites, 8 (3), pp. 136-153.

Fodde, E., 2006. Conserving sites on the Central Asian Silk Roads: the case of Otrar Tobe, Kazakhstan. Conservation and Management of Archaeological Sites, 8 (2), pp. 77-87.

Fodde, E., 2007. Fired Brick and Sulphate Attack: The Case of Moenjodaro, Pakistan. Journal of Architectural Conservation, 13 (1), pp. 69-80.

Fodde, E., 2001. Legno e architettura vernacolare in Sardegna. Adrastea, VIII (17), pp. 42-47.

Fodde, E., 2007. Traditional Earthen Construction and Repair Methods in Sardinia, Italy. Vernacular Architecture, 38 (1), pp. 61-69.

Fodde, E., Watanabe, K. and Fujii, Y., 2013. Measuring evaporation distribution of mud brick and rammed earth. Structural Survey Journal, 32 (1), pp. 32-48.

Fodde, E., 2008. Analytical investigation of traditional lime plasters : The case of Sardinia, Italy. International Journal of Architectural Heritage, 2 (2), pp. 187-198.

Fodde, E., 2010. Conservation and conflict in the central Asian silk roads. Journal of Architectural Conservation, 16 (1), pp. 75-94.

Fodde, E., 2008. Fired brick conservation in the Kyrgyz Silk Roads:The case of Burana's Mausoleum 4. Journal of Architectural Conservation, 14 (1), pp. 77-94.

Fodde, E., 1999. L'oro dei Campi. Bioarchitettura, V (13), p. 27.

Fodde, E., 2000. Prime Ipotesi sui Meccanismi di Degrado delle Malte di Calce del Campidano. Informazione, XII (87), pp. 41-43.

Fodde, E., 1998. Produzione e Uso della Calce, Oltre la Tradizione. Informazione, XX (80), pp. 16-20.

Fodde, E., 2000. Terra in Inghilterra, Tecnologie per il Recupero e per il Restauro. Bioarchitettura, VI (19), pp. 34-35.

Fodde, E., 2008. The influence of soluble salts on the decay of Moenjodaro, Pakistan. Structural Survey Journal, 26 (3), pp. 223-241.

Fodde, E., 2009. Traditional Earthen Building Techniques in Central Asia. International Journal of Architectural Heritage, 3 (2), pp. 145-168.

Fodde, E. and Khan, M. S., 2010. Moenjodaro: A World Heritage Site at Risk. The Historic Environment: Policy & Practice, 1 (1), pp. 52-69.

Fodde, E. and Khan, M. S., 2014. Forthcoming. Affordable monsoon rain mitigation measures in the World Heritage site of Moenjodaro, Pakistan. International Journal of Architectural Heritage

Fodde, E., Sala, R. and Deom, J., 2013. Managing and conserving large oases in southwest Kazakhstan. Conservation and Management of Archaeological Sites, 15 (2), pp. 152-168.

Fodde, E., Watanabe, K. and Fujii, Y., 2007. Preservation of earthen sites in remote areas: The Buddhist monastery of Ajina Tepa, Tajikistan. Conservation and Management of Archaeological Sites, 9 (4), pp. 194-218.

Fong, P. S.-W., Hills, M. J. and Hayles, C. S., 2007. Dynamic knowledge creation through value management teams. Journal of Management in Engineering, 23 (1), pp. 40-49.

Forster, A. M., Fernie, S., Carter, K., Walker, P. and Thomson, D., 2015. Innovation in low carbon construction technologies:An historic analysis for obviating defects. Structural Survey Journal, 33 (1), pp. 52-72.

Forsyth, M., 1990. Lecons de la boite a chausseures. L'Architecture d'Aujourdhui, 1990 (268), pp. 158-161.

Forsyth, M., 1983. Theme and variations : approaches to auditorium design. Architects' Journal, 1983 (8), pp. 49-53.

Forsyth, M., 2003. Victorian and Edwardian Bath : the forgotten years. The Victorian, 2003 (14), pp. 4-9.

Fossati, S., Pesce, G. L. A. and Decri, A., 2009. Lo studio della provenienza del legno attraverso l’analisi delle curve di accrescimento. Notiziario di Archeologia Medievale, 78, pp. 8-9.

Fox, M., Coley, D., Goodhew, S. and De Wilde, P., 2014. Thermography methodologies for detecting energy related building defects. Renewable and Sustainable Energy Reviews, 40, pp. 296-310.

Fox, M., Coley, D., Goodhew, S. and De Wilde, P., 2015. Time-lapse thermography for building defect detection. Energy and Buildings, 92, pp. 95-106.

Fraternali, F., Spadea, S. and Ascione, L., 2013. Buckling behavior of curved composite beams with different elastic response in tension and compression. Composite Structures, 100, pp. 280-289.

Fraternali, F., Spadea, S. and Berardi, V. P., 2014. Effects of recycled PET fibres on the mechanical properties and seawater curing of Portland cement-based concretes. Construction and Building Materials, 61, pp. 293-302.

Frear, N., Darby, A. P. and Salo, A., 2003. A new method for measuring the dynamic response of cable net structures. The Structural Engineer, 81 (12), pp. 19-20.

Fujii, Y., Fodde, E., Watanabe, K. and Murakami, K., 2009. Digital photogrammetry for the documentation of structural damage in earthen archaeological sites: the case of Ajina Tepa, Tajikistan. Engineering Geology, 105 (1-2), pp. 124-133.

Futcher, J. A., Kershaw, T. J. and Mills, G., 2013. Urban form and function as building performance parameters. Building and Environment, 62, pp. 112-123.

Füllekrug, M., Roussel-Dupré, R., Symbalisty, E. M. D., Colman, J. J., Chanrion, O., Soula, S., van der Velde, O., Odzimek, A., Bennett, A. J., Pasko, V. P. and Neubert, T., 2011. Relativistic electron beams above thunderclouds. Atmospheric Chemistry and Physics, 11 (15), pp. 7747-7754.

Gale, L. and Ibell, T. J., 2005. Multiple anchorage zones in fibre-reinforced polymer prestressed concrete structures. Magazine of Concrete Research, 57 (3), pp. 149-166.

Gale, L., Ibell, T. J. and Williams, C., 2006. Analysis of doubly loaded end blocks in FRP-prestressed concrete. Magazine of Concrete Research, 58, 547--563.

Gale, L. and Ibell, T., 2000. Effects of compression reinforcement on the shear strength of reinforced concrete bridge beams. Magazine of Concrete Research, 52 (4), pp. 275-285.

Gantzer, P. A., Bryant, L. and Little, J. C., 2009. Lake and Reservoir Management – 2009 Literature Review. Water Environment Research, 81 (10), pp. 1854-1956.

Gantzer, P. A., Bryant, L. and Little, J. C., 2009. Controlling soluble iron and manganese in a water-supply reservoir using hypolimnetic oxygenation. Water Research, 43 (5), pp. 1285-1294.

Gantzer, P. A., Bryant, L. and Little, J. C., 2009. Effect of hypolimnetic oxygenation on oxygen depletion rates in two water-supply reservoirs. Water Research, 43 (6), pp. 1700-1710.

Garbett, J., Darby, A. P. and Ibell, T. J., 2010. Optimised beam design using innovative fabric-formed concrete. Advances in Structural Engineering, 13 (5), pp. 849-860.

Gardner, L., Cruise, R. B., Sok, C. P., Krishnan, K. and Ministro, J., 2007. Life cycle costing of metallic structures. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 160 (ES4), pp. 167-177.

Gardner, L. and Cruise, R., 2009. Modeling of Residual Stresses in Structural Stainless Steel Sections. Journal of Structural Engineering, 135 (1), pp. 42-53.

Garvin, S. L. and Hayles, C. S., 1999. The chemical compatibility of cement–bentonite cut-off wall material. Construction and Building Materials, 13 (6), pp. 329-341.

Gates, P., 2010. A newcomer's perspective. Elevation: The Journal of the Society of Facade Engineering

Gates, P., Ibell, T., Darby, A., Evernden, M. and Kragh, M., 2012. Advanced composites for facade retrofit. The Structural Engineer, 90 (1), pp. 46-48.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2013. An investigation into whether building information modeling (BIM) can assist with construction delay claims. International Journal of 3-D Information Modeling (IJ3DIM), 2 (1), pp. 45-52.

Gibbs, D. J., Emmitt, S., Ruikar, K. and Lord, W., 2014. Recommendations on the creation of computer generated exhibits for construction delay claims. Construction Law Journal, 30 (4), pp. 236-248.

Gibbs, D.J., Emmitt, S., Lord, W. and Ruikar, K., 2015. Forthcoming. BIM and construction contracts : CPC 2013's approach. Proceedings of the ICE - Management, Procurement & Law

Glass, J., Dyer, T., Georgopoulos, C., Goodier, C., Paine, K., Parry, T., Baumann, H. and Gluch, P., 2013. Future use of life-cycle assessment in civil engineering. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 204-212.

Gorse, C. A. and Emmitt, S., 2007. Communication behaviour during management and design team meetings : a comparison of group interaction. Construction Management and Economics, 25 (11), pp. 1197-1213.

Gorse, C. A. and Emmitt, S., 2009. Informal interaction in construction progress meetings. Construction Management and Economics, 27 (10), pp. 983-993.

Gorse, C. A. and Emmitt, S., 2003. Investigating interpersonal communication during construction progress meetings : challenges and opportunities. Engineering, Construction and Architectural Management, 10 (4), pp. 234-244.

Gosling, P.D., Bridgens, B.N., Bartle, N., Albrecht, A., Alpermann, H., Angeleri, A., Canobbio, R., Barnes, M., Dieringer, F., Gellin, S., Lewis, W.J., Mageau, N., Mahadevan, R., Marion, J.-M., Marsden, P., Milligan, E., Phang, Y.P., Sahlin, K., Stimpfle, B., Suire, O. and Uhlemann, J., 2013. Analysis and design of membrane structures:Results of a round robin exercise. Engineering Structures, 48, pp. 313-328.

Grammatikos, S., Kordatos, E. Z., Matikas, T. E. and Paipetis, A. S., 2014. Real-time debonding monitoring of composite repaired materials via electrical, acoustic, and thermographic methods. Journal of Materials Engineering and Performance, 23 (1), pp. 169-180.

Grammatikos, S. and Paipetis, A. S., 2012. On the electrical properties of multi scale reinforced composites for damage accumulation monitoring. Composites Part B - Engineering, 43 (6), pp. 2687-2696.

Grammatikos, S. A., Kordatos, E. Z., Barkoula, N. M., Matikas, T. E. and Paipetis, A. S., 2011. Innovative non-destructive evaluation and damage characterization of composite aerostructures using thermography. Plastics, Rubber and Composites: Macromolecular Engineering, 40 (6-7), pp. 342-348.

Grammatikos, S. A., Kordatos, E. Z., Matikas, T. E., David, C. and Paipetis, A. S., 2014. Current injection phase thermography for low-velocity impact damage identification in composite laminates. Materials & Design, 55, pp. 429-441.

Grant, R. G. and Walker, P., 2003. Survey of building sands in Australia. Construction and Building Materials,, 17 (4), pp. 231-240.

Greaves, D. M., 2004. A quadtree adaptive method for simulating fluid flows with moving interfaces. Journal of Computational Physics, 194 (10), pp. 35-56.

Greaves, D. M., 2004. Simulation of interface and free surface flows in a viscous fluid using adapting quadtree grids. International Journal for Numerical Methods in Fluids, 44 (10), pp. 1093-1117.

Greaves, D. M., 2006. Simulation of viscous water column collapse using adapting hierarchical grids. International Journal for Numerical Methods in Fluids, 50 (6), pp. 693-711.

Gregg, M. C., Hall, R. A., Carter, G. S., Alford, M. H., Lien, R. C., Winkel, D. P. and Wain, D. J., 2011. Flow and mixing in Ascension, a steep, narrow canyon. Journal of Geophysical Research, 116 (C7), C07016.

Grice, J. R., Taylor, P. H., Eatock Taylor, R., Zang, J. and Walker, D. A. G., 2015. Extreme wave elevations beneath offshore platforms, second order trapping, and the near flat form of the quadratic transfer functions. Computers and Fluids, 119, pp. 13-25.

Griffiths, D. S., Winstanley, D. and Gabriel, Y., 2005. Learning shock : the trauma of return to formal learning. Management Learning, 36 (3), pp. 275-297.

Grist, E., Paine, K., Heath, A., Norman, J. and Pinder, H., 2015. Structural and durability properties of hydraulic lime-pozzolan concretes. Cement & Concrete Composites, 62, pp. 212-223. Item availability may be restricted.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2013. Compressive strength development of binary and ternary lime-pozzolan mortars. Materials & Design, 52, pp. 514-523.

Grist, E. R., Paine, K. A., Heath, A., Norman, J. and Pinder, H., 2015. The environmental credentials of hydraulic lime-pozzolan concretes. Journal of Cleaner Production, 93, pp. 26-37.

Gross, C. D. and Walker, P. J., 2014. Racking performance of timber studwork and hemp-lime walling. Construction and Building Materials,, 66 (15), pp. 429-435.

Gross, C., Walker, P. and Pritchett, I., 2013. Compression resistance of confined timber stud walls. Proceedings of the Institution of Civil Engineers: Construction Materials:, 166 (3), pp. 175-183.

Hadi, M., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Performance of shear wall composed of LVL and cement fiber board sheathing. Journal of Asian Architecture and Building Engineering, 9 (2), pp. 463-469.

Hall, J., Arheimer, B., Borga, M., Brazdil, R., Claps, P., Kiss, A., Kjeldsen, T. R., Kriaučiūnienė, J., Kundzewicz, Z. W., Lang, M., Llasat, M. C., Macdonald, N., McIntyre, N., Mediero, L., Merz, B., Merz, R., Molnar, P., Montanari, A., Neuhold, C., Parajka, J., Perdigão, R. A. P., Plavcová, L., Rogger, M., Salinas, J. L., Sauquet, E., Schär, C., Szolgay, J., Viglione, A. and Blöschl, G., 2014. Understanding flood regime changes in Europe : A state of the art assessment. Hydrology and Earth Systems Science, 18, pp. 2735-2772.

Hall, R. A., Alford, M. H., Carter, G. S., Gregg, M. C., Lien, R.-C., Wain, D. J. and Zhao, Z., 2014. Transition from partly standing to progressive internal tides in Monterey Submarine Canyon. Deep Sea Research Part II: Topical Studies in Oceanography, 104, pp. 164-173.

Harney, M., 2007. Pope and Prior Park: a study in landscape and literature. Studies in the History of Gardens & Designed Landscapes, 27 (3), pp. 183-196.

Harney, M., 2008. Strawberry Hill. Architectural Review, 224 (1341), pp. 72-77.

Harris, R., 2004. Sustainability into Reality. Responsible Use of Timber. The Structural Engineer, 82 (17), pp. 24-27.

Harris, R., Romer, J., Kelly, O. and Johnson, S., 2003. Design and Construction of the Downland Gridshell. Building Research and Information, 31 (6), pp. 427-454.

Harris, R. J. L., Kelly, O. and Dickson, M., 2003. Downland Gridshell - An Innovation in Timber Design. Proceedings of the Institution of Civil Engineers - Civil Engineering, 156 (1), pp. 26-33.

Harris, R., 2011. Design of timber gridded shell structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 164 (2), pp. 105-116.

Harris, R., 2014. Forthcoming. Innovative structural systems in timber. RFS Quarterly Journal of Forestry, 108 (4), pp. 40-45.

Harris, R., Chang, W.-S., Walker, P. and Shanks, J., 2014. Engineering Research into Traditional Timber Joints. CONTEXT - Journal of The Institute of Historic Building Conservation

Harris, R., Haskins, S. and Roynon, J., 2008. The Savill Garden gridshell:Design and construction. The Structural Engineer, 86 (17), pp. 27-34.

Harris, R., Roberts, P. and Hargreaves, I., 2010. Aligned with nature. Civil Engineering, 80 (11), p. 82.

Hart, V. and Tucker, R., 2001. "Immaginacy Set Free": Aristotelian Ethics and Inigo Jones's Banqueting House at Whitehall. Res: Journal of Anthropology and Aesthetics, 39, p. 151.

Hart, V. and Tucker, R., 2002. Ornament and the Work of Inigo Jones. Architectura, 32, pp. 36-52.

Hart, V., 2003. A Pretty Impudent Countenance: John Vanbrugh's Seaton Delaval. arq: Architectural Research Quarterly, 7, p. 311.

Hart, V., 2013. A copy of the Oxford edition of Andrea Palladio's L'Antichita di Roma (1709). The Library: Transactions of the Bibliographical Society, 14 (2), pp. 208-212.

Hart, V., 2013. Book Review of Inigo's Stones, Inigo Jones, Royal Marbles and Imperial Power. Society of Architectural Historians of Great Britain Newsletter, 2013 (108), p. 20.

Hart, V., 2013. Book Review of Woolwich. Survey of London : Volume 48. The Burlington Magazine, October, pp. 717-718.

Hart, V., 2012. Book review of The Eighteenth-Century Church in Britain. Ecclesiological Society, 45, pp. 94-95.

Hart, V., 2012. Inigo Jones. Allegemeines Kunstlerlexikon

Hart, V., 2010. Inigo Jones : The Column and the Crown. Centre 30: National Gallery of Art, CASVA, 30, pp. 100-103.

Hart, V., 2010. Inigo Jones, 'Vitruvius Britannicus'. Architectural History: Journal of the Society of Architectural Historians of Great Britain, 53, pp. 1-39.

Hart, V., 2015. Untitled review. The Oriental Ceramics Society Newsletter, 23.

Hart, V. and Day, A., 1995. A computer model of the theatre of Sebastiano Serlio, 1545. Computers and the History of Art, 5 (1), pp. 41-52.

Hart, V., Day, A. and Robson, J., 1997. A computer reconstruction of Inigo Jones's Covent Garden Piazza, London, c.1640. Computers and the History of Art, 7 (2), pp. 81-86.

Hayles, C., Graham, M. and Fong, P. S. W., 2010. Value management for sustainable decision making. Proceedings of the Institution of Civil Engineers-Municipal Engineer, 163 (1), pp. 43-50.

Hayles, C. S. and Bluck, B. J., 1995. Examination of some of the causes of sandstone deterioration at Culzean Castle, Scotland. SSCR journal : the quarterly news magazine of the Scottish Society for Conservation and Restoration, 6 (2), pp. 10-13.

Hayles, C. S., Dean, M., Lappin, S. A. and McCullough, J., 2013. Climate change adaptation : A decision support framework to encourage environmentally responsible behaviour. Smart and Sustainable Built Environment, 2 (2).

Hayles, C. S. and Holdsworth, S. E., 2008. Curriculum change for sustainability. Journal of Education in the Built Environment (JEBE), 3 (1), pp. 25-48.

Hayles, C. S., 2010. An examination of decision making in post disaster housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 1 (1), pp. 103-122.

Heath, A., Pestana, J., Bejerano, M. and Harvey, J., 2004. Normalizing behavior of unsaturated granular pavement materials. Journal of Geotechnical and Geoenvironmental Engineering, 130 (9), pp. 896-904.

Heath, A., Roesler, J. and Harvey, J., 2003. Modeling Longitudinal, Corner and Transverse Cracking in Jointed Concrete Pavements. International Journal of Pavement Engineering, 4 (1), pp. 51-58.

Heath, A., 2008. A Strain-based Non-linear Elastic Model for Geomaterials. WSEAS Transactions on Applied and Theoretical Mechanics, 3 (6), pp. 197-206.

Heath, A., Paine, K., Goodhew, S., Ramage, M. and Lawrence, M., 2013. The potential for using geopolymer concrete in the UK. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 195-203.

Heath, A., Theyse, H. and Lea, J., 1999. Use of ash in low-volume road construction in South Africa. Transportation Research Record, 1 (1652), pp. 196-202.

Heath, A., Walker, P., Fourie, C. and Lawrence, M., 2009. Compressive strength of extruded unfired clay masonry units. Proceedings of the Institution of Civil Engineers: Construction Materials, 162 (3), pp. 105-112.

Heath, A., Walker, P., Jaquin, P. and Lawrence, M., 2012. Render induced cracking of earth masonry. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 165 (8), pp. 435-442.

Heath, A. C. and Roesler, J. R., 2000. Top-down cracking of rigid pavements constructed with fast-setting hydraulic cement concrete. Transportation Research Record, 1712, pp. 3-12.

Herdt, G. and Wilson Jones, M., 2008. Scanning ancient building components. Photogrammetrie - Fernerkundung - Geoinformation (PFG), 4, pp. 245-251.

Hill, T., Shanks, J., Stott, J. and Walker, P., 2007. Testing and analysis of a traditional oak frame. ICE Proceedings Structures & Buildings, SB1, p. 23.

Hirst, E. A. J., Walker, P., Paine, K. A. and Yates, T., 2012. Characteristics of low density hemp-lime building materials. Proceedings of Institution of Civil Engineers, Construction Materials, 165 (1), pp. 15-23.

Hodgson, J. A., Donohue, S., O'Connell, Y., Reid, G., Krahn, H. and Young, M., 2009. A geophysical journey around Ireland. First Break, 27 (8), pp. 35-42.

Hodsdon, T. and Walker, P., 2006. Study of round-wood timber-limecrete composite panels. Structural Engineering International, 16, 245--251.

Horne, R. and Hayles, C., 2008. Towards global benchmarking for sustainable homes:An international comparison of the energy performance of housing. Journal of Housing and the Built Environment, 23 (2), pp. 119-130.

Hu, Z. Z., Greaves, D. M. and Wu, G. X., 2002. Numerical simulation of fluid flows using an unstructured finite volume method with adaptive tri-tree grids. International Journal for Numerical Methods in Fluids, 39 (5), pp. 403-440.

Hubbard, S. B., Kershaw, T. J., Usher, A., Savchenko, A. K. and Shytov, A., 2011. Millikelvin de Haas–van Alphen and magnetotransport studies of graphite. Physical Review B, 83 (3), 035122.

Hudson, R., Shepherd, P. G. and Hines, D., 2011. Aviva Stadium: a case study in integrated parametric design. International Journal of Architectural Computing, 9 (2), pp. 187-204.

Ibell, T. J., Darby, A. P. and Bailiss, J., 2007. Fabric-formed concrete beams. Concrete, 41 (1), pp. 28-29.

Ibell, T. J., Orr, J. J., Kostova, K., Darby, A. P. and Evernden, M., 2013. Extraordinary possibilities for future concrete structures. The IES Journal Part A: Civil & Structural Engineering, 6 (4), pp. 239-248.

Ibell, T. J. and Walker, P. J., 2013. Editorial. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 187-188.

Ibell, T., 2015. Creativity and fun: core strengths. The Structural Engineer, 93 (2), pp. 10-17.

Ibell, T., 2010. Learning structural engineering. The Structural Engineer, 88 (8), pp. 17-19.

Ibell, T. and Burgoyne, C., 1994. A generalised lower-bound approach to the analysis of anchorage zones for prestressed concrete. Magazine of Concrete Research, 46 (2), pp. 331-338.

Ibell, T. and Burgoyne, C., 1994. A plasticity analysis of anchorage zones. Magazine of Concrete Research, 46 (1), pp. 39-48.

Ibell, T. and Burgoyne, C., 1993. An experimental investigation of the behaviour of anchorage zones. Magazine of Concrete Research, 45 (6), pp. 281-292.

Ibell, T. and Burgoyne, C., 1999. The use of FRPs vs steel for shear reinforcement of concrete. ACI Structural Journal, 96 (6), pp. 997-1003.

Ibell, T., Morley, C. and Middleton, C., 1997. A plasticity approach to the assessment of shear in concrete beam-and-slab bridges. The Structural Engineer, 75 (19), pp. 331-338.

Ibell, T., Morley, C. and Middleton, C., 1998. An upper-bound plastic analysis for shear. Magazine of Concrete Research, 50 (1), pp. 67-73.

Ibell, T., Morley, C. and Middleton, C., 1998. Shear assessment of concrete beam-and-slab bridges. ICE Journal of Structures and Buildings, 128 (3), pp. 264-273.

Ibell, T., Morley, C. and Middleton, C., 1999. Strength and behaviour in shear of concrete beam-and-slab bridges. ACI Structural Journal, 96 (3), pp. 386-391.

Ibell, T. J., Darby, A. P. and Denton, S., 2009. Research issues related to the appropriate use of FRP in concrete structures. Construction and Building Materials, 23 (4), pp. 1521-1528.

Ince, C., Carter, M. A., Wilson, M. A., Collier, N. C., El-Turki, A., Ball, R. J. and Allen, G. C., 2011. Factors affecting the water retaining characteristics of lime and cement mortars in the freshly-mixed state. Materials and Structures, 44 (2), pp. 509-516.

Ince, C., Carter, M. A., Wilson, M. A., El-Turki, A., Ball, R. J., Allen, G. C. and Collier, N. C., 2010. Analysis of the abstraction of water from freshly mixed jointing mortars in masonry construction. Materials and Structures/Materiaux et Constructions, 43 (7), pp. 985-992.

Ioannou, S., Reig, L., Paine, K. and Quillin, K., 2014. Properties of a ternary calcium sulfoaluminate-calcium sulfate-fly ash cement. Cement and Concrete Research, 56, pp. 75-83.

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2013. Forthcoming. Influence of loading-rate on the failure mode of RC columns. Proceedings of the ICE-Engineering and Computational Mechanics

Isaac, P., Darby, A., Ibell, T. and Evernden, M. C., 2011. Plasticity-based approach for evaluating the blast response of RC columns retrofitted with FRP. International Journal of Protective Structures (IJPS), 2 (3), pp. 367-380.

Jackson, P. and Nevola, F., 2006. Beyond the Palio: urbanism and ritual in Renaissance Siena. Renaissance Studies, 20 (2), pp. 137-146.

Jaiswal, K., Wald, D. and D'Ayala, D. F., 2011. Developing empirical collapse fragility functions for global building types. Earthquake Spectra, 27 (3), pp. 775-795.

Jeon, J. Y. and Barron, M., 2005. Evaluation of stage acoustics in Seoul Arts Center Concert Hall by measuring stage support. Journal of the Acoustical Society of America, 117, 232--239.

Jung, K., Murakami, S., Kitamori, A., Chang, W. S. and Komatsu, K., 2010. Improvement of glued-in-rod joint system using compressed wooden dowel. Holzforschung, 64 (6), pp. 799-804.

Jørgensen, B. and Emmitt, S., 2009. Investigating the integration of design and construction from a “lean” perspective. Construction Innovation: Information, Process, Management, 9 (2), pp. 225-240.

Jørgensen, B. and Emmitt, S., 2008. Lost in transition : the transfer of lean manufacturing to construction. Engineering, Construction and Architectural Management, 15 (4), pp. 383-398.

Kansara, K., Ibell, T., Darby, A. and Evernden, M., 2010. Interpreting conservativeness in design criteria for flexural strengthening of concrete structures. International Journal of Concrete Structures and Materials, 4 (1), pp. 25-36.

Kansara, K., Karusala, R. and , S. E. R. C. (C.), C., 2007. Fuzzy logic-based analytical load rating of existing bridges. The Bridge and Structural Engineer, 37 (2), p. 21.

Kansara, K. and Ramanjaneyulu, K., 2006. Influence of the geometric nonlinearities on the response of the suspension bridges. Journal of the Institution of Engineers, 87, pp. 40-46.

Kansara, K., Ramanjaneyulu, K. and , S. E. R. C., C., 2008. Service-life-performance of RC bridges under environmental actions. Journal of the Institution of Engineers, 89 (November), pp. 55-62.

Keiller, A. and Ledbetter, S., 2008. Robustness of rainscreen panels. Construction Materials, 161 (3), p. 93.

Kelly, D. M., Chen, Q. and Zang, J., 2015. PICIN:a particle-in-cell solver for incompressible free surface flows with two-way fluid-solid coupling. SIAM Journal on Scientific Computing, 37 (3), B403-B424.

Kelly, O., Harris, R. and Dickson, M., 2001. The Construction of the Downland Gridshell. The Structural Engineer, 79 (17), pp. 25-33.

Kershaw, T. J., Eames, M. and Coley, D. A., 2010. Comparison of multi-year and reference year building simulations. Building Services Engineering Research and Technology, 31 (4), pp. 357-369.

Kershaw, T. J., Sanderson, M., Coley, D. and Eames, M., 2010. Estimation of the urban heat island for UK climate change projections. Building Services Engineering Research and Technology, 31 (3), pp. 251-263.

Kershaw, T. J. and Simm, S., 2014. Thoughts of a design team:Barriers to low carbon school design. Sustainable Cities and Society, 11, pp. 40-47. Item availability may be restricted.

Kershaw, T. J., Usher, A., Sachrajda, A. S., Gupta, J., Wasilewski, Z. R., Elliott, M., Ritchie, D. A. and Simmons, M. Y., 2007. Decay of long-lived quantum Hall induced currents in 2D electron systems. New Journal of Physics, 9 (71).

Kirkby, M. J., Gallart, F., Kjeldsen, T. R., Irvine, B. J., Froebrich, J., Lo Porto, A. and De Girolamo, A., 2011. Classifying low flow hydrological regimes at a regional scale. Hydrology and Earth System Sciences Discussions, 15 (12), pp. 3741-3750.

Kjeldsen, T. R., Jones, D. A. and Morris, D. G., 2014. Using multiple donor sites for enhanced flood estimation in ungauged catchments. Water Resources Research, 50 (8), 6646–6657.

Kjeldsen, T. R., Macdonald, N., Lang, M., Mediero, L., Albuquerque, T., Bogdanowicz, E., Brazdil, R., Castellarin, A., David, V., Fleig, A., Gul, G. O., Kriauciuniene, J., Kohnova, S., Merz, B., Nicholson, O., Roald, L. A., Salinas, J. L., Sarauskiene, D., Sraj, M., Strupczewski, W., Szolgay, J., Toumazis, A., Vanneuville, W., Veijalainen, N. and Wilson, D., 2014. Documentary evidence of past floods in Europe and their utility in flood frequency estimation. Journal of Hydrology, 517, pp. 963-973.

Kjeldsen, T. R., 2015. Forthcoming. How reliable are design flood estimates in the UK? Journal of Flood Risk Management, 8 (3), pp. 237-246.

Kjeldsen, T. R., 2009. Modelling the impact of urbanisation on flood runoff volume. Proceedings of the ICE - Water Management, 162 (5), pp. 329-336.

Kjeldsen, T. R., Miller, J. D. and Packman, J. C., 2013. Modelling design flood hydrographs in catchments with mixed urban and rural land cover. Hydrology Research, 44 (6), pp. 1040-1057.

Kjeldsen, T. and Prosdocimi, I., 2015. A bivariate extension of the Hosking and Wallis goodness-of-fit measure for regional distributions. Water Resources Research, 51 (2), pp. 896-907.

Kjeldsen, T. R. and Jones, D. A., 2009. A formal statistical model for pooled analysis of extreme floods. Hydrology Research, 40 (5), pp. 465-480.

Kjeldsen, T. R. and Jones, D. A., 2009. An exploratory analysis of error components in hydrological regression modeling. Water Resources Research, 45 (2), W02407.

Kristiansen, K., Emmitt, S. and Bonke, S., 2005. Changes in the Danish construction sector : the need for a new focus. Engineering, Construction and Architectural Management, 12 (5), pp. 502-511.

Kuhlmann, E., 2006. Towards "citizen professionals": New patterns of professionalism in health care in Germany. Knowledge, Work and Society, 4 (1), pp. 59-81.

Kurchania, R., Sawant, S. S. and Ball, R., 2014. Synthesis and characterization of magnetite/polyvinyl alcohol core–shell composite nanoparticles. Journal of the American Ceramic Society, 97 (10), 3208–3215.

Laefer, D. F., Hong, L. T., Erkal, A., Long, J. H. and Cording, E. J., 2011. Manufacturing, assembly, and testing of scaled, historic masonry for one-gravity, pseudo-static, soil-structure experiments. Construction and Building Materials, 25 (12), pp. 4362-4373.

Lagomarsino, S., Modaressi, H., Pitilakis, K., Bosiljkov, V., Calderini, C., D'Ayala, D., Benouar, D. and Cattari, S., 2010. PERPETUATE Project: The Proposal of a Performance-Based Approach to Earthquake Protection of Cultural Heritage. Advanced Materials Research, 133-134, pp. 1119-1124.

Lanckriet, T., Puleo, J. A., Masselink, G., Turner, I. L., Conley, D., Blenkinsopp, C. and Russell, P., 2014. Comprehensive field study of swash-zone processes, part 2:Sheet flow sediment concentrations during quasi-steady backwash. Journal of Waterway, Port, Coastal, and Ocean Engineering, 140 (1), pp. 29-42.

Larsson, B., Sundqvist, J. and Emmitt, S., 2006. Component manufacturers' perceptions of managing innovation. Building Research and Information, 34 (6), pp. 552-564.

Lash, D., Ward, S., Kershaw, T. J., Butler, D. and Eames, M., 2014. Robust rainwater harvesting : Probabilistic tank sizing for climate change adaptation. Journal of Water and Climate Change, 5 (4), pp. 526-539.

Latif, E., Ciupala, M. A. and Wijeyesekera, D. C., 2014. The comparative in situ hygrothermal performance of Hemp and Stone Wool insulations in vapour open timber frame wall panels. Construction and Building Materials,, 73, pp. 205-213.

Latif, E., Tucker, S. and Ciupala, M. A., 2014. Hygric properties of hemp bio-insulations with differing compositions. Construction and Building Materials,, 66, pp. 702-711.

Latif, E., Ciupala, M. A., Tucker, S., Wijeyesekera, D. C. and Newport, D., 2015. Hygrothermal performance of wood-hemp insulation in timber frame wall panels with and without a vapour barrier. Building and Environment, 92, pp. 122-134.

Lawrence, E. L., Ball, R. J., Evans, R. and Stevens, R., 2002. Effect of soaking time on the positive active material and performance of the valve regulated lead/acid battery. Journal of Power Sources, 110 (1), pp. 125-132.

Lawrence, E. L., Ball, R. J., Evans, R. and Stevens, R., 2002. Under potential deposition of lead onto carbon fibres for use in lead/acid battery applications. Journal of Materials Science, 37 (21), pp. 4517-4520.

Lawrence, M., Drinkwater, L., Heath, A. and Walker, P., 2009. Racking shear resistance of prefabricated straw-bale panels. Proceedings of the Institute of Civil Engineers: Construction Materials, 162 (3), pp. 133-138.

Lawrence, M., Shea, A., Walker, P. and De Wilde, P., 2013. Hygrothermal performance of bio-based insulation materials. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 257-263.

Lawrence, M., Fodde, E., Paine, K. and Walker, P., 2012. Hygrothermal performance of an experimental hemp-lime building. Key Engineering Materials, 517, pp. 413-421.

Lawrence, M., Heath, A. and Walker, P., 2009. Determining moisture levels in straw bale construction. Construction and Building Materials, 23 (8), pp. 2763-2768.

Lawrence, M., Heath, A. and Walker, P., 2013. Development of a novel mortar for use with unfired clay bricks. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (1), pp. 18-26.

Lawrence, R. M. H., Mays, T., Rigby, S., Walker, P. and D'Ayala, D., 2007. Effects of carbonation on the pore structure of non-hydraulic lime mortars. Cement and Concrete Research, 37 (7), pp. 1059-1069.

Lawrence, R.M.H., Mays, T. J., Walker, P. and D'Ayala, D., 2006. The use of TG to measure different concentrations of lime in non-hydraulic lime mortars. Journal of Thermal Analysis and Calorimetry, 85 (2), pp. 377-382.

Layzell, J. and Ledbetter, S., 1999. FMEA applied to cladding systems - reducing the risk of failure. Building Research and Information, 26 (6), pp. 351-357.

Le, H. H., Morel, J. C., Garnier, D. and McCombie, P., 2011. Charts for the conservation of vernacular drystone retaining walls. WIT Transactions on the Built Environment, 118, pp. 463-472.

Ledbetter, S., 2002. Facade engineering - What's behind the façade? The Structural Engineer, 80 (22), pp. 21-24.

Ledbetter, S., 2001. Facade engineering: the challenge for structural engineers. The Structural Engineer, 79 (11), pp. 13-17.

Ledbetter, S., 2000. Nickel sulfide in toughened glass. Architectural and Surveying Institute Journal, 12 (3), pp. 28-29.

Ledbetter, S., 2000. Trouble glazing. Building, August, pp. 44-46.

Ledbetter, S. R., Keiller, A. P. and Walker, A. R., 2006. Structural use of glass. Journal of Architectural Engineering, 12 (3), pp. 137-149.

Li, K. and Darby, A. P., 2006. An experimental investigation into the use of a buffered impact damper. Journal of Sound and Vibration, 291, 844--860.

Li, K. and Darby, A. P., 2006. Experiments on the effect of an impact damper on a multiple-degree-of-freedom system. Journal of Vibration and Control, 12, 445--464.

Li, K. and Darby, A. P., 2009. A high precision direct integration scheme for nonlinear dynamic systems. Journal of Computational and Nonlinear Dynamics, 4 (4), 041008.

Li, K. and Darby, A., 2010. An approach to the design of buffer for a buffered impact damper. Structural Control and Health Monitoring, 17 (1), pp. 68-82.

Li, K. and Darby, A., 2009. Modelling a buffered impact damper system using a spring-damper model of impact. Structural Control and Health Monitoring, 16 (3), pp. 287-302.

Li, K. and Darby, A. P., 2008. A buffered impact damper for multi-degree-of-freedom structural control. Earthquake Engineering & Structural Dynamics, 37 (13), pp. 1491-1510.

Li, L., Patterson, M. D., Zhang, K. and Kerswell, R., 2012. Spin-up and spin-down in a half cone: A pathological situation or not? Physics of Fluids, 24 (11), 116601.

Li, X.-J., Gao, F.-P., Yang, B. and Zang, J., 2011. Wave-induced pore pressure responses and soil liquefaction around pile foundation. International Journal of Offshore and Polar Engineering, 21 (3), pp. 233-239.

Liang, Q., Zang, J., Borthwick, A. and Taylor, P. H., 2007. Shallow flow simulation on dynamically adaptive cut-cell quadtree grids. International Journal for Numerical Methods in Fluids, 53 (12), pp. 1777-1799.

Liu, S. X., Sun, Y. Y., Li, J. X. and Zang, J., 2010. Experimental study on 2-D focusing wave run-up on a vertical cylinder. China Ocean Engineering, 24 (3), pp. 499-512.

Liu, X., Xia, J., Blenkinsopp, C., Arnold, L. and Wright, G., 2014. High water mark determination based on spatial continuity of swash probability. Journal of Coastal Research, 30 (3), 00061.1.

Liu, Z., Teng, B., Ning, D. Z. and Sun, L., 2010. 波 流 与 结 构 物 相 互 作 用 的 数 值 模 拟. Chinese Journal of Computational Mechanics, 27 (1), pp. 82-87.

Liu, Z., Teng, B., Ning, D. Z. and Sun, L., 2010. Using a time-domain higher-order boundary element method to simulate wave and current diffraction from a 3-D body. Journal of Marine Science and Application, 9 (2), pp. 156-162.

Lo, S. M., Zhao, C. M., Liu, M. and Copping, A., 2008. A simulation model for studying the implementation of performance-based fire safety design in buildings. Automation in Construction, 17 (7), pp. 852-863.

Lo, S. N. G., Norton, B. and Mannis, A., 2001. Domestic energy use and air quality; a case study of the city of Belfast. Applied Energy, 68 (1), pp. 1-18.

Lombillo, I., Villegas, L., Fodde, E. and Thomas, C., 2014. In situ mechanical investigation of rammed earth:calibration of minor destructive testing. Construction and Building Materials, 51, pp. 451-460.

Long, M., Daynes, P., Donohue, S. and Lobby, M., 2012. Embedded retaining wall behaviour in Dublin’s fluvio-glacial gravel, Ireland. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 165 (5), pp. 289-307.

Long, M. and Donohue, S., 2010. Characterisation of Norwegian marine clays with combined shear wave velocity and CPTU data. Canadian Geotechnical Journal (CGJ), 47 (7), pp. 709-718.

Long, M. and Donohue, S., 2010. Characterization of Norwegian marine clays with combined shear wave velocity and piezocone cone penetration test (CPTU) data. Canadian Geotechnical Journal, 47 (7), pp. 709-718.

Long, M. and Donohue, S., 2007. In situ shear wave velocity from MASW surface waves at Norwegian soft clay sites. Studia Geotechnica et Mechanica, 29 (1-2), pp. 69-86.

Long, M. and Donohue, S., 2007. In situ shear wave velocity from multichannel analysis of surface waves (MASW) tests at eight Norwegian research sites. Canadian Geotechnical Journal, 44 (5), pp. 533-544.

Long, M., Donohue, S. and O'Connor, P., 2008. Rapid, cost effective and accurate determination of in-situ stiffness using MASW at Bothkennar. Ground Engineering, Nov 2008, pp. 34-37.

Long, M., Gudjonsson, G., Donohue, S. and Hagberg, K., 2010. Engineering characterisation of Norwegian glaciomarine silt. Engineering Geology, 110 (3-4), pp. 51-65.

Losada, I. J., Patterson, M. D. and Losada, M. A., 1997. Harmonic generation past a submerged porous step. Coastal Engineering, 31 (1-4), pp. 281-304.

Loveridge, F., Spink, T., O'Brien, T., Briggs, K. and Butcher, D., 2010. The impact of climate and climate change on infrastructure slopes with particular reference to southern England. Quarterly Journal of Engineering Geology and Hydrogeology, 43 (4), pp. 461-472.

Lowry, G. V., Espinasse, B. P., Badireddy, A. R., Richardson, C. J., Reinsch, B. C., Bryant, L., Bone, A. J., Deonarine, A., Chae, S., Therezien, M., Colman, B. P., Hsu-Kim, H., Bernhardt, E. S., Matson, C. W. and Wiesner, M. R., 2012. Long-term transformation and fate of manufactured Ag nanoparticles in a simulated large scale freshwater emergent wetland. Environmental Science & Technology, 46 (13), pp. 7027-7036.

Lu, L., Cheng, L., Teng, B. and Sun, L., 2010. Numerical simulation and comparison of potential flow and viscous fluid models in near trapping of narrow gaps. Journal of Hydrodynamics, 22 (5, supplement 1), pp. 120-125.

Lu, L., Teng, B., Cheng, L., Sun, L. and Chen, X. B., 2011. Modelling of multi-bodies in close proximity under water waves:Fluid resonance in narrow gaps. Science China Physics, Mechanics & Astronomy, 54 (1), pp. 16-25.

Lu, L., Teng, B., Sun, L. and Chen, B., 2011. Modelling of multi-bodies in close proximity under water waves:Fluid forces on floating bodies. Ocean Engineering, 38 (13), pp. 1403-1416.

Lu, M., Du, J. T., Wang, X. D. and Du, J., 2011. Comparative assessment of daylight availability in high-density residential area:a case in Harbin. Journal of Harbin Institute of Technology (New Series), 18 (2), pp. 55-61.

Luo, J., Ball, R. J. and Stevens, R., 2004. Gadolinia doped ceria/yttria stabilised zirconia electrolytes for solid oxide fuel cell applications. Journal of Materials Science, 39 (1), pp. 235-240.

Ma, Y. X., Dong, G. H., Liu, S. X., Zang, J., Li, J. X. and Sun, Y. Y., 2010. Laboratory study of unidirectional focusing waves in intermediate depth water. Journal of Engineering Mechanics-Asce, 136 (1), pp. 78-90.

Ma, Y., Dong, G., Perlin, M., Liu, S., Zang, J. and Sun, Y., 2009. Higher-harmonic focused-wave forces on a vertical cylinder. Ocean Engineering, 36 (8), pp. 595-604.

Macdonald, N., Kjeldsen, T. R., Prosdocimi, I. and Sangster, H., 2013. Reassessing flood frequency for the Sussex Ouse, Lewes : The inclusion of historical flood information since AD 1650. Natural Hazards and Earth System Sciences Discussion, 1, pp. 7615-7646.

Macdonald, N., Kjeldsen, T., Prosdocimi, I. and Sangster, H., 2014. Reassessing flood frequency for the Sussex Ouse, Lewes: the inclusion of historical flood information since AD 1650. Natural Hazards and Earth System Sciences, 14, pp. 2817-2828.

Mackenzie, C., Ormondroyd, G., Curling, S., Ball, R. J., Whiteley, N. and Malham, S., 2014. Ocean warming, more than acidification, reduces shell strength in a commercial shellfish species during food limitation. PLoS ONE, 9 (1), e86764.

Madsen, H., Lawrence, D., Lang, M., Martinkova, M. and Kjeldsen, T., 2014. Review of trend analysis and climate change projections of extreme precipitation and floods in Europe. Journal of Hydrology, 519 (D), pp. 3634-3650.

Mancusi, G., Spadea, S. and Berardi, V. P., 2013. Experimental analysis on the time-dependent bonding of FRP laminates under sustained loads. Composites Part B - Engineering, 46, pp. 116-122.

Maniatidis, V. and Walker, P., 2008. Structural capacity of rammed earth in compression. Journal of Materials in Civil Engineering, 20 (3), pp. 230-238.

Mannoni, T., Pesce, G. and Vecchiattini, R., 2006. Mortiers de chaux dolomitique avec adjonction de kaolin cuit : l'expèrience génoise. ArcheoScience - Revue d'Archeometrie, 30, pp. 67-79.

Margalha, M. G., Silva, A. S., Do Rosário Veiga, M., De Brito, J., Ball, R. J. and Allen, G. C., 2013. Microstructural changes of lime putty during aging. Journal of Materials in Civil Engineering, 25 (10), pp. 1524-1532.

Marshall, A. H. and Barron, M., 2001. Spatial responsiveness in concert halls and the origins of spatial impression. Applied Acoustics, 62, 91--108.

Maskell, D., Heath, A. and Walker, P. J., 2014. Geopolymer stabilisation of unfired earth masonry units. Key Engineering Materials, 600, pp. 175-185.

Maskell, D., Heath, A. and Walker, P. J., 2014. Inorganic Stabilisation Methods for Extruded Earth Masonry Units. Construction and Building Materials, 71, pp. 602-609.

Maskell, D., Walker, P. J., Thomson, A., Gross, C. D., Beadle, K. and Mander, T., 2014. Structural development and testing of a prototype house using timber and straw bales. ICE Proceedings Structures & Buildings, 168 (1), pp. 67-75.

Maskell, D., Heath, A. and Walker, P., 2015. Use of Metakaolin with stabilised extruded earth masonry units. Construction and Building Materials, 78 (1), p. 172.

Masselink, G., Russell, P.E., Blenkinsopp, C. and Turner, I.L., 2010. Swash zone sediment transport, step dynamics and morphological response on a gravel beach. Marine Geology, 274 (1-4), pp. 50-68.

Matias, A., Blenkinsopp, C.E. and Masselink, G., 2014. Detailed investigation of overwash on a gravel barrier. Marine Geology, 350, pp. 27-38. Item availability may be restricted.

Matias, A., Masselink, G., Kroon, A., Blenkinsopp, C. and Turner, I., 2013. Overwash experiment on a sandy barrier. Journal of Coastal Research, SI 65, pp. 778-783.

Matthews, L. A., Greaves, D. M. and Williams, C. J. K., 2008. Numerical simulation of viscous flow interaction with an elastic membrane. International Journal for Numerical Methods in Fluids, 57 (11), pp. 1577-1602.

McCombie, P. F. and Penman, J., 2001. The production of interactive engineering design software using Borland Delphi. Advances in Engineering Software, 32 (10-11), pp. 789-796.

McCombie, P., 1993. Trees and foundations : a reassessment. Arboricultural Journal, 17 (4), pp. 341-358.

McCombie, P., Cook, D., Rattray, D. and Silverman, B., 1993. The measurement and checking of the accuracy of small strain measurements during testing of model brick walls. Masonry International, 6 (3), pp. 82-87.

McCombie, P. F., 2009. Displacement based multiple wedge slope stability analysis. Computers and Geotechnics, 36 (1-2), pp. 332-341.

McCullen, N. and Moresco, P., 2011. Route to hyperchaos in a system of coupled oscillators with multistability. Physical Review E (PRE), 83 (4), 046212.

McCullen, N. and Moresco, P., 2006. Method for measuring unstable dimension variability from time series. Physical Review E (PRE), 73 (4), 046203.

McCullen, N., Mullin, T. and Golubitsky, M., 2007. Sensitive signal detection using a feed-forward oscillator network. Physical Review Letters, 98 (25), p. 254101.

McCullen, N. J., Ivanchenko, M. V., Shalfeev, V. D. and Gale, W. F., 2011. A dynamical model of decision-making behavior in a network of consumers with applications to energy choices. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering, 21 (09), pp. 2467-2480.

McCullen, N. J., Rucklidge, A. M., Bale, C. S. E., Foxon, T. J. and Gale, W. F., 2013. Multiparameter models of innovation diffusion on complex networks. SIAM Journal on Applied Dynamical Systems, 12 (1), pp. 515-532.

McGregor, F., Heath, A., Fodde, E. and Shea, A., 2014. Conditions affecting the moisture buffering measurement performed on compressed earth blocks. Building and Environment, 75, pp. 11-18. Item availability may be restricted.

McIntyre, N., Ballard, C., Bruen, M., Bulygina, N., Buytaert, W., Cluckie, I., Dunn, S., Ehret, U., Ewen, J., Gelfan, A., Hess, T., Hughes, D., Jackson, B., Kjeldsen, T. R., Merz, R., Park, J.-S., O'Connell, E., O'Donnell, G., Oudin, L., Todini, E., Wagener, T. and Wheater, H., 2014. Modelling the hydrological impacts of rural land use change. Hydrology Research, 45 (6), pp. 737-754.

Mediero, L., Kjeldsen, T., Macdonald, N., Kohnova, S., Merz, B., Vorogushyn, S., Wilson, D., Alburquerque, T., Bloschl, G., Bogdanowicz, E., Castellarin, A., Hall, J., Kobold, M., Kriauciuniene, J., Lang, M., Madsen, H., Gul, G. O., Perdigão, R. A. P., Roald, L. A., Salinas, J. L., Toumazis, A., Veijalainen, N. and Þórarinsson, Ó., 2015. Identification of coherent flood regions across Europe by using the longest streamflow records. Journal of Hydrology, 528, pp. 341-360. Item availability may be restricted.

Mediero, L. and Kjeldsen, T. R., 2014. Regional flood hydrology in a semi-arid catchment using a GLS regression model. Journal of Hydrology, 514, pp. 158-171.

Medjdoub, B., Richens, P. and Barnard, N., 2003. Generation of variational standard plant room solutions. Automation in Construction, 12 (2), pp. 155-166.

Mesbah, A., Morel, J. C., Ghavami, K. and Walker, P., 2004. Development of a direct tensile test for compacted earth blocks reinforced with natural fibres. ASCE Journal of Materials in Civil Engineering, 16 (1).

Mettem, C. and Harris, R., 2002. Building on timber codes and standards. The Structural Engineer, 80 (17), pp. 31-34.

Miller, J. D., Kjeldsen, T. R., Hannaford, J. and Morris, D. G., 2013. A hydrological assessment of the November 2009 floods in Cumbria, UK. Hydrology Research, 44 (1), pp. 180-197.

Miller, J., Kim, H., Kjeldsen, T. R., Packman, J., Grebby, S. and Dearden, R., 2014. Assessing the impact of urbanization on storm runoff in a peri-urban catchment using historical change in impervious cover. Journal of Hydrology, 515, pp. 59-70.

Moran, F., Natarajan, S. and Nikolopoulou, M.-H., 2012. Developing a database of energy use for historic dwellings in Bath, UK. Energy and Buildings, 55, pp. 218-226.

Morel, J. C., Mesbah, A., Oggero, M. and Walker, P., 2001. Building houses with local materials: a means to drastically reduce the environmental impact of construction. Building and Environment, 36 (10), pp. 1119-1126.

Morel, J. C., Pkla, A. and Walker, P., 2007. Compressive strength testing of compressed earth blocks. Construction and Building Materials, 21, 303--309.

Morgan, R. C. and Ball, R. J., 2013. Environmental (wet and dry) cycling of hydraulic lime mortars. Journal of the Building Limes Forum, 20, pp. 21-31.

Mundell, C., McCombie, P. F., Bailey, C., Heath, A. and Walker, P., 2009. Limit-equilibrium assessment of drystone retaining structures. Proceedings of the Institution of Civil Engineers - Geotechnical engineering, 162 (4), pp. 203-212.

Mundell, C., McCombie, P. F., Heath, A., Harkness, J. and Walker, P., 2010. Behaviour of drystone retaining structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 163 (1), pp. 3-12.

Murakami, S., Kitamori, A., Jung, K., Chang, W.-S. and Komatsu, K., 2012. Prediction of Reinforcement Effect by Screw on Triangular Embedment Perpendicular to the Grain with Variation of Screw Locations. Open Journal of Civil Engineering, 2 (1), pp. 167-173.

Murphy, G., Counsell, J., Baster, E., Allison, J. and Counsell, S., 2013. Symbolic modelling and predictive assessment of air source heat pumps. Building Services Engineering Research and Technology, 34 (1), pp. 23-39.

Musau, F. and Steemers, K., 2007. Space Planning and Energy Efficiency in Laboratory Spaces: the Role of Spatial and Temporal Diversity. Architectural Science Review, 50, 281--292.

Musau, F. and Steemers, K., 2008. Space planning and energy efficiency in office spaces:The role of spatial and temporal diversity. Architectural Science Review, 51 (2), pp. 133-145.

Musau, F. and Steemers, K., 2009. Space planning, ventilation and energy efficiency in offices. International Journal of Ventilation, 8 (1), pp. 9-22.

Mwaikambo, L. Y. and Ansell, M. P., 1999. The effect of chemical treatment on the properties of hemp, sisal, jute and kapok for composite reinforcement. Die Angewandte Makromolekulare Chemie, 272, pp. 108-116.

Müller, B., Bryant, L., Matzinger, A. and Wüest, A., 2012. Hypolimnetic oxygen depletion in eutrophic lakes. Environmental Science & Technology, 46 (18), pp. 9964-9971.

Nacif, G. L., Panzera, T. H., Strecker, K., Christoforo, A. L. and Paine, K., 2013. Investigations on cementitious composites based on rubber particle waste additions. Materials Research, 16 (2), pp. 259-268.

Natarajan, S. and Levermore, G. J., 2007. Predicting future UK housing stock and carbon emissions. Energy Policy, 35 (11), pp. 5719-5727.

Natarajan, S. and Levermore, G. J., 2007. Domestic futures — Which way to a low-carbon housing stock? Energy Policy, 35 (11), pp. 5728-5736.

Natarajan, S. and Moran, F., 2015. PV in Historic Dwellings: the potential to reduce domestic CO2 emissions. Journal of Building Engineering, 3. Item availability may be restricted.

Natarajan, S., Padget, J. and Elliott, L., 2011. Modelling UK domestic energy and carbon emissions: an agent-based approach. Energy and Buildings, 43 (10), pp. 2602-2612.

Nevola, F., 2010. Book Review of A. Savelli, Siena. Il popolo e le contrade (XVI-XX secolo). Urban History, 37 (2), pp. 338-340.

Nevola, F., 2010. Book Review: The cult of Saint Catherine of Siena. A study in civil religion. Journal of Ecclesiastical History, 61 (1), p. 178.

Nevola, F., 2011. Home shopping: urbanism, commerce and palace design in renaissance Italy. Journal of the Society of Architectural Historians, 70 (2), pp. 153-174.

Nevola, F., 2010. Introduction: locating communities in the early modern Italian city. Urban History, 37 (3), pp. 349-359.

Nevola, F., 2004. Le patronage architectural du pape Pie II Piccolomini à Sienne. Médiévales, 47, pp. 139-152.

Nevola, F., 2010. Machtelt Israëls, ed. 'Sassetta : The Borgo San Sepolcro Altarpiece'. Renaissance Quarterly, 63 (2), pp. 589-591.

Nevola, F., 2010. Michelangelo architetto a Roma. The Burlington Magazine, CLII (1282), pp. 63-64.

Nevola, F., 2007. Palaces, shops and clientage clustering in Early Modern Siena. Citta e Storia, II, pp. 365-379.

Nevola, F., 2009. Review of Il Campidoglio. Storia di un monumento civile di Roma papale, A. Bedon. The Burlington Magazine, CLI (1278), pp. 470-471.

Nevola, F., 2006. Ritual geography: housing the papal court of Pius II Piccolomini in Siena (1459-60). Renaissance Studies, 20 (2), pp. 201-224.

Nevola, F., 1999. Siena nel Rinascimento: sistemi urbanistici e strutture istituzionali (c. 1400-1520). Bullettino Senese di Storia Patria, CVI, pp. 44-67.

Nevola, F., 2011. “El Papa non verrà:”:The failed triumphal entry of Leo X de Medici to Siena (November 1515). Sixteenth Century Journal, 42 (2), pp. 427-443.

Nevola, F. and Jackson, P., 2006. Introduction. Renaissance Studies, 20 (2), pp. 127-137.

Nevola, F., Renzulli, E. and Bardati, F., 2012. Introduction : Tales of the City: Outsiders’ Descriptions of Cities in the Early Modern Period. Citta e Storia, 7 (1), pp. 3-8.

Newlands, M. D. and Paine, K. A., 2010. Research collaboration:Sustainable high performance concrete infrastructure. Indian Concrete Journal, 84 (10), pp. 37-45.

Newlands, M. D., Paine, K. A., Vemuri, N. A. and Dhir, R. K., 2008. A linear test method for determining early-age shrinkage of concrete. Magazine of Concrete Research, 60 (10), pp. 747-757.

Newton, A., Georgallides, C. and Ansell, M. P., 1996. A geometrical model for a two-layer woven composite reinforcement fabric. Composites Science and Technology, 56 (3), pp. 329-337.

Nikolopoulou, M., 2005. Simplified tools for the environmental performance of urban spaces. IASME Transactions, 2 (5), pp. 702-708.

Nikolopoulou, M. and Lykoudis, S., 2006. Thermal comfort in outdoor urban spaces: Analysis across different European countries. Building and Environment, 41 (11), pp. 1455-1470.

Nikolopoulou, M. and Steemers, K., 2003. Thermal Comfort and Psychological Adaptation as a Guide for Designing Urban Spaces. Energy and Buildings, 35 (1), pp. 95-101.

Nikolopoulou, M.-H., Baker, N. and Steemers, K., 2001. Thermal Comfort in Outdoor Urban Spaces: Understanding the Human Parameter. Solar Energy, 70 (3), pp. 227-235.

Nikolopoulou, M.-H., Kleissl, J., Linden, P. F. and Lykoudis, S., 2011. Pedestrians' perception of environmental stimuli through field surveys: Focus on particulate pollution. Science of the Total Environment, 409 (13), pp. 2493-2502.

Nikolopoulou, M.-H. and Lykoudis, S., 2007. Use of outdoor spaces and microclimate in a Mediterranean urban area. Building and Environment, 42 (10), pp. 3691-3707.

Ning, D., Zang, J., Liang, Q., Taylor, P. H. and Borthwick, A. G., 2008. Boussinesq cut cell model for non-linear wave interaction with coastal structures. International Journal for Numerical Methods in Fluids, 57 (10), pp. 1459-1483.

Ning, D. Z., Teng, B., Eatock Taylor, R. and Zang, J., 2008. Numerical simulation of non-linear regular and focused waves in an infinite water-depth. Ocean Engineering, 35 (8-9), pp. 887-899.

Ning, D. Z., Teng, B., Zang, J. and Liu, S. X., 2009. An Efficient Model for Transient Surface Waves in Both Finite and Infinite Water Depths. China Ocean Engineering, 23 (3), pp. 459-472.

Ning, D. Z., Zang, J., Liu, S. X., Taylor, R. E., Teng, B. and Taylor, P. H., 2009. Free-surface evolution and wave kinematics for nonlinear uni-directional focused wave groups. Ocean Engineering, 36 (15-16), pp. 1226-1243.

Nordby, A. S. and Shea, A. D., 2013. Building materials in the operational phase:Impacts of direct carbon exchanges and hygrothermal effects. Journal of Industrial Ecology, 17 (5), pp. 763-776.

Norton, B., Eames, P. C. and Lo, S. N. G., 2001. Alternative approaches to thermosyphon solar-energy water heater performance analysis and characterisation. Renewable and Sustainable Energy Reviews, 5 (1), pp. 79-96.

Nsugbe, E. and Williams, C., 1999. Robert LeRicolais - Visions and Paradox. AA Files, 39, pp. 55-60.

Nuño, M., Ball, R. J., Bowen, C. R., Kurchania, R. and Sharma, G. D., 2015. Photocatalytic activity of electrophoretically deposited (EPD) TiO2 coatings. Journal of Materials Science, 50 (14), pp. 4822-4835. Item availability may be restricted.

Oehlers, D. J., Visintin, P., Chen, J. F. and Ibell, T. J., 2014. Simulating reinforced concrete members. Part 1: Partial interaction properties. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (11), pp. 646-653.

Oehlers, D. J., Visintin, P., Chen, J. F. and Ibell, T. J., 2014. Simulating reinforced concrete members. Part 2:Displacement-based analyses. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 167 (12), pp. 718-727.

Onic, L., Bucur, V., Ansell, M. P., Pizzi, A., Deglise, X. and Merlin, A., 1998. Dynamic thermomechanical analysis as a control technique for thermoset bonding of wood joints. International Journal of Adhesion and Adhesives, 18 (2), pp. 89-94.

Orr, J. J., 2014. Form:An adventure in concrete and brick. The Structural Engineer, 92 (4), pp. 12-20.

Orr, J. J., Darby, A. P., Ibell, T. J., Evernden, M. C. and Otlet, M., 2011. Concrete structures using fabric formwork. The Structural Engineer, 89 (8), pp. 20-26.

Orr, J. J., Darby, A. P., Ibell, T. J., Denton, S. R. and Shave, J. D., 2010. Shear design of circular concrete sections using the Eurocode 2 truss model. The Structural Engineer, 88 (23-24), pp. 26-33.

Orr, J., Darby, A., Ibell, T. and Evernden, M., 2013. Durability enhancements using fabric formwork. Magazine of Concrete Research, 65 (20), pp. 1236-1245.

Orr, J., Darby, A., Ibell, T., Evernden, M. and Otlet, M., 2011. Concrete structures using fabric formwork. Atkins Technical Journal, 7 (1), 112.

Orr, J., Ibell, T., Evernden, M. and Darby, A., 2015. Day one sustainability. European Journal of Engineering Education, 40 (3), pp. 285-296.

Orr, J., Pask, D., Weise, K. and Otlet, M., 2015. Forthcoming. Birmingham Gateway:structural assessment and strengthening. Structural Concrete

Orr, J. J., Darby, A., Ibell, T. and Evernden, M., 2014. Design methods for flexibly formed concrete beams. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 167 (11), pp. 654-666.

Otter, A. D. and Emmitt, S., 2008. Design team communication and design task complexity : the preference for dialogues. Architectural Engineering and Design Management, 4 (2), pp. 121-129.

Otter, A. D. and Emmitt, S., 2007. Exploring effectiveness of team communication : balancing synchronous and asynchronous communication in design teams. Engineering, Construction and Architectural Management, 14 (5), pp. 408-419.

Oueslati, O., de Girolamo, A. M., Abouabdillah, A., Kjeldsen, T. and Lo Porto, A., 2015. Forthcoming. Classifying the flow regimes of mediterranean streams using multi-variate analysis. Hydrological Processes

Paine, K., 2015. Editorial. Proceedings of Institution of Civil Engineers: Construction Materials, 168 (1), pp. 1-2.

Paine, K. A. and Dhir, R. K., 2010. Recycled aggregates in concrete: a performance related approach. Magazine of Concrete Research, 62 (7), pp. 519-530.

Paine, K. A. and Dhir, R. K., 2010. Research on new applications for granulated rubber in concrete. Proceedings of the Institution of Civil Engineers: Construction Materials, 163 (1), pp. 7-17.

Paine, K. A., Dhir, R. K. and Doran, V. P. A., 2002. Incinerator Bottom Ash: Engineering and Environmental Properties as a Cement Bound Paving Material. International Journal of Pavement Engineering, 3 (1), pp. 43-52.

Paine, K. A., Dhir, R. K. and Zheng, L., 2006. Predicting early-age temperatures of blended-cement concrete. Proceedings of Institution of Civil Engineers, Construction Materials, 159 (4), pp. 163-170.

Paine, K. A., Zheng, L. and Dhir, R. K., 2005. Experimental study and modelling of heat evolution of blended cements. Advances in Cement Research, 17 (3), pp. 121-132.

Pan, J. C., Zang, J. and Cui, K. L., 1991. Long-term distribution of limiting values of wave parameters in the coast waters of China Yellow Sea. Journal of Port & Waterway Engineering, 5.

Pan, J. C., Zang, J. and Zhu, X. B., 1991. Joint distribution of one tenth of large wave heights with average periods along coast of China's Yellow Sea. Journal of Dalian University of Technology, 31 (6).

Panzera, T. H., Rubio, J. C., Bowen, C. R. and Walker, P. J., 2008. Microstructural design of materials for aerostatic bearings. Cement & Concrete Composites, 30 (7), pp. 649-660.

Patterson, M. D., Caulfield, C. P., McElwaine, J. N. and Dalziel, S. B., 2006. Time-dependent mixing in stratified Kelvin-Helmholtz billows: Experimental observations. Geophysical Research Letters, 33, L15608.

Patterson, M. D., Simpson, J. E., Dalziel, S. B. and N Nikiforakis, N., 2005. Numerical modelling of two-dimensional and axisymmetric gravity currents. International Journal for Numerical Methods in Fluids, 47 (10-11), pp. 1221-1227.

Patterson, M. D., Simpson, J. E., Dalziel, S. B. and van Heijst, G. J. F., 2006. Vortical motion in the head of an axisymmetric gravity current. Physics of Fluids, 18, 046601.

Patterson, M. D. and Wettlaufer, J. S., 2010. Scanned multi-light-emitting-diode illumination for volumetric particle image velocimetry. Review of Scientific Instruments, 81 (9), 096101.

Pavlopoulou, S., Grammatikos, S., Kordatos, E., Worden, K., Paipetis, A., Matikas, T. and Soutis, C., 2015. Forthcoming. Continuous debonding monitoring of a patch repaired helicopter stabilizer:damage assessment and analysis. Composite Structures, 127, pp. 231-244.

Penman, J. and McCombie, P., 1996. The Computerised design of reinforced soil structures. Ground Engineering, 29 (9), pp. 36-37.

Perera, K., Ibell, T. and Darby, A., 2013. Bond characteristics of near surface mounted CFRP bars. Construction and Building Materials, 43, pp. 58-68.

Perera, S., Hayles, C. S. and Kerlin, S., 2011. An analysis of value management in practice : The case of Northern Ireland's construction industry. Journal of Financial Management of Property and Construction, 16 (2), pp. 94-110.

Pesce, G. L., 2009. Archeologia dell’architettura e software libero. Archeologia dell’Architettura, 14, pp. 31-42.

Pesce, G. L. A. and Ricci, R., 2009. La diffusione e l’uso delle 'malte al caolino' attraverso lo studio delle analisi XRD. Notiziario di Archeologia Medievale, 78, pp. 10-13.

Pesce, G. L. A. and Ricci, R., 2009. La diffusione e l’uso delle 'malte al caolino' attraverso lo studio delle analisi XRD. Notiziario di Archeologia Medievale, 78, pp. 10-13.

Pesce, G., 2004. L'Archivo della Toponomastica Ligure. Ligures, 2, pp. 392-393.

Pesce, G., Quarta, G., Calcagnile, L., D'Elia, M., Cavaciocchi, P., Lastrico, C. and Guastella, R., 2009. Radiocarbon dating of lumps from aerial lime mortars and plasters:Methodological issues and results from S. Nicolò of Capodimonte church (Camogli, Genoa – Italy). Radiocarbon, 51 (2), pp. 867-872.

Pesce, G. L., Morgan, D., Odgers, D., Henry, A., Allen, M. and Ball, R. J., 2013. Consolidation of weathered limestone using nanolime. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4), pp. 213-228.

Powell, R. and Copping, A., 2010. Sleep deprivation and its consequences in construction workers. Journal of Construction Engineering and Management, 136 (10), pp. 1086-1092.

Price, N. and Heath, A., 2013. Quality control of earth construction in developing areas. Proceedings of the Institution of Civil Engineers: Construction Materials

Proctor, R. W., 2006. Architecture from the Cell-Soul : René Binet and Ernst Haeckel. The Journal of Architecture, 11 (4), pp. 407-424.

Proctor, R. W., 2005. Churches for a Changing Liturgy : Gillespie, Kidd & Coia and the Second Vatican Council. Architectural History: Journal of the Society of Architectural Historians of Great Britain, 48, pp. 291-322.

Proctor, R. W., 2007. Selling Art Nouveau in the Capital : The Nancy School in Paris. Art on the Line : International Arts Journal, 3.

Proctor, R. W., 2008. Social Structures : Gillespie, Kidd & Coia’s Halls of Residence for the University of Hull. Journal of the Society of Architectural Historians, 67 (1), pp. 106-129.

Proctor, R., 2003. A cubist history : the department store in late nineteenth-century Paris. Transactions of the Royal Historical Society (Sixth Series), 13, pp. 227-235.

Prosdocimi, I., Kjeldsen, T. R. and Miller, J. D., 2015. Detection and attribution of urbanization effect on flood extremes using nonstationary flood-frequency models. Water Resources Research, 51 (6), pp. 4244-4262.

Prosdocimi, I., Kjeldsen, T. R. and Svensson, C., 2013. Non-stationarity in annual and seasonal series of peak flow and precipitation in the UK. Natural Hazards and Earth System Sciences Discussion, 1, pp. 5499-5544.

Prosdocimi, I., Kjeldsen, T. R. and Svensson, C., 2014. Non-stationarity in annual and seasonal series of peak flow and precipitation in the UK. Natural Hazards and Earth System Sciences, 14, 1125–1144.

Puleo, J. A., Lanckriet, T. and Blenkinsopp, C., 2014. Bed level fluctuations in the inner surf and swash zone of a dissipative beach. Marine Geology, 349, pp. 99-112.

Puleo, J. A., Blenkinsopp, C., Conley, D., Masselink, G., Turner, I. L., Russell, P., Buscombe, D., Howe, D., Lanckriet, T., Mccall, R. and Poate, T., 2014. Comprehensive field study of swash-zone processes. 1 : experimental design with examples of hydrodynamic and sediment transport measurements. Journal of Waterway, Port, Coastal, and Ocean Engineering, 140 (1), 0000210.

Pye, A. and Ledbetter, S., 1998. The selection of an adhesive for the construction of a glass-adhesive T-beam. International Journal of Adhesion and Adhesives, 18 (3), pp. 159-165.

Pálsson, G., 2012. These are not old ruins:a heritage of the Hrun. International Journal of Historical Archaeology, 16 (3), pp. 559-576.

Qiu, D., Jia, Y. and Zang, J., 1996. Interaction of conoidal wave and vertical wall. Shuili Xuebao/Journal of Hydraulic Engineering, 9, pp. 11-21.

Qiu, D. and Zang, J., 1993. Wave force action on a pier sitting on deformable seabed. Journal of Hydrodynamics, 5 (3), pp. 32-41.

Qiu, D. and Zang, J., 1995. Wave-induced seapage action on cylinder resting on deformable foundation. Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, 35 (5), 713--.

Qiu, D., Zang, J. and Jia, Y., 1996. Action of cnoidal waves on vertical walls. China Ocean Engineering, 10 (2), 129-?.

Qiu, D., Zou, Z., Zang, J. and Li, L., 1993. Wave-induced seepage force on two piers resting on porous elastic seabed. Journal of Dalian University of Technology, 33 (2).

Qiu, D. H. and Zang, J., 1995. Wave uplifting forces on cylinders. Journal of Harbour Engineering, 5.

Radford, A. and Day, A., 1996. Growing Georgian Bath. Environment and Planning B: planning and design, 23 (4), pp. 465-488.

Rajamma, R., Ball, R. J., Tarelho, L. A. C., Allen, G. C., Labrincha, J. A. and Ferreira, V. M., 2009. Characterisation and use of biomass fly ash in cement-based materials. Journal of Hazardous Materials, 172 (2-3), pp. 1049-1060.

Rajamma, R., Senff, L., Ribeiro, M. J., Labrincha, J. A., Ball, R., Allen, G. C. and Ferreira, V. M., 2015. Biomass fly ash effect on fresh and hardened state properties of cement based materials. Composites Part B - Engineering, 77, pp. 1-9.

Ratti, C. and Richens, P., 2004. Raster analysis of urban form. Environment and Planning B: planning and design, 31 (2), pp. 297-309.

Raupp-Pereira, F., Ball, R. J., Rocha, J., Labrincha, J. and Allen, G., 2008. New waste based clinkers: Belite and lime formulations. Cement and Concrete Research, 38 (4), pp. 511-521.

Raw-Rees, S., Pesce, G. L. A., Ball, R. J. and Fodde, E., 2012. Characterization of binders in the historic lime mortars and plasters from 1A Royal Crescent, Bath. Journal of the Building Limes Forum, 19, pp. 28-37.

Razaqpur, A. G. and Spadea, S., 2015. Shear strength of FRP reinforced concrete members with stirrups. Journal of Composites for Construction, 19 (1), 04014025.

Reynolds, T., Harris, R. and Chang, W., 2014. Nonlinear pre-yield modal properties of timber structures with large-diameter steel dowel connections. Engineering Structures, 76, pp. 235-244. Item availability may be restricted.

Reynolds, T., Harris, R. and Chang, W.-S., 2013. An analytical model for embedment stiffness of a dowel in timber under cyclic load. European Journal of Wood and Wood Products, 71 (5), pp. 609-622.

Reynolds, T., Harris, R., Chang, W.-S., Bregulla, J. and Bawcombe, J., 2015. Ambient vibration tests of a cross-laminated timber building. Proceedings of the Institution of Civil Engineers: Construction Materials:, 168 (3), pp. 121-131.

Richens, P. N., Trinder, M. and Nagashima, M., 2001. Design participation through the internet. Journal of Architecture and Building Science, 116 (1481), pp. 353-358.

Richens, P., 2000. Playing games. Digital Creativity, 11 (3), pp. 156-160.

Richens, P., 2011. Towards non-linear representation. arq: Architectural Research Quarterly, 15 (2), pp. 93-95.

Richens, P. and Trinder, M., 1999. Design participation through the internet: a case study. arq: Architectural Research Quarterly, 3 (4), pp. 361-375.

Robinson, F. J., Patterson, M. D. and Sherwood, S. C., 2013. A numerical modeling study of the propagation of idealized sea-breeze density currents. Journal of the Atmospheric Sciences, 70 (2), pp. 653-668.

Roe, P. J. and Ansell, M. P., 1985. Jute-Reinforced Polyester Composites. Journal of Materials Science, 20 (11), pp. 4015-4020.

Ruffle, S. and Richens, P., 2004. Stylist and scaleable: vector graphics for all on the web. International Journal of Architectural Computing, 2 (3), pp. 333-350.

Ruikar, K. and Emmitt, S., 2009. Editorial : Special Issue - Technology Strategies for Collaborative Working. ITcon - Technology Strategies for Collaborative Working, 14, pp. 14-16.

Rundquist, J., Emmitt, S., Halila, F., Hjort, B. and Larsson, B., 2013. Construction innovation : addressing the project-product gap in the Swedish construction sector. International Journal of Innovation Science, 5 (1), pp. 1-10.

Saks, M. and Kuhlmann, E., 2006. Introduction: Professions, social inclusion and citizenship. Knowledge, Work and Society, 4 (1), pp. 9-20.

Salinas, J. L., Castellarin, A., Kohnová, S. and Kjeldsen, T. R., 2013. On the quest for a pan-European flood frequency distribution : Effect of scale and climate. Hydrology and Earth System Sciences Discussions, 10 (5), pp. 6321-6358.

Salinas, J. L., Castellarin, A., Kohnova, S. and Kjeldsen, T., 2014. Regional parent flood frequency distributions in Europe – Part 2: Climate and scale controls. Hydrology and Earth Systems Science, 18, pp. 4391-4401.

Salinas, J. L., Castellarin, A., Viglione, A., Kohnova, S. and Kjeldsen, T., 2014. Regional parent flood frequency distributions in Europe – Part 1: Is the GEV model suitable as a pan-European parent? Hydrology and Earth Systems Science, 18, pp. 4381-4389.

Salter, C., Ramachandran, G., Emmitt, S. and Bouchlaghem, N., 2013. Economic cost of fire : exploring UK fire incident data to develop a design tool. Fire Safety Journal, 62, pp. 256-263.

Samuel, F., 1999. A Profane Annunciation; The Representation of Sexuality in the Architecture of Ronchamp. Journal of Architectural Education, 53 (2), pp. 74-90.

Samuel, F., 2002. Animus, Anima and the Architecture of Le Corbusier. Harvest, 48 (2), pp. 42-60.

Samuel, F., 2008. Corb in the crypt. The Architects' Journal

Samuel, F., 2005. De Stijl and Dutch Modernism. Journal of Design History, 18 (2), pp. 224-225.

Samuel, F., 2002. L'Esprit Nouveau: Purism in Paris? Journal of Design History, 15 (1), pp. 62-64.

Samuel, F., 2003. Le Corbusier before Le Corbusier. Journal of Design History, 16 (2), pp. 192-194.

Samuel, F., 2001. Le Corbusier, Rabelais and the Oracle of the Holy Bottle. Word and Image, 17 (4), pp. 325-338.

Samuel, F., 1999. Le Corbusier, Teilhard de Chardin and the Planetisation of Mankind? The Journal of Architecture, 4, pp. 149-165.

Samuel, F., 1998. Le Corbusier, Women, Nature and Culture. Issues in Art and Architecture, 5 (2), pp. 1-17.

Samuel, F., 2001. Old guard's happiness in an age of confusion. The Times Higher Education Supplement, 1 (517), p. 36.

Samuel, F., 1999. Plymouth School of Architecture: prospectus 99. Building Design

Samuel, F., 2005. Saturday Night Fever: A Promenade Architecturale. Made, 2, pp. 35-36.

Samuel, F., 2008. Suburban Self Build. Field, 1 (2), pp. 111-124.

Samuel, F., 2002. Take a closer look at that black leather. The Times Higher Education Supplement, 1 (517), p. 27.

Samuel, F., 1999. The Representation of Mary in Le Corbusier's Chapel at Ronchamp. Church History: Studies in Christianity and Culture, 68 (2), pp. 398-417.

Scott, T. B., Petherbridge, J. R., Harker, N. J., Ball, R. J., Heard, P. J., Glascott, J. and Allen, G. C., 2011. The oxidative corrosion of carbide inclusions at the surface of uranium metal during exposure to water vapour. Journal of Hazardous Materials, 195, pp. 115-123.

Serrapede, M., Pesce, G. L., Ball, R. J. and Denuault, G., 2014. Nanostructured Pd hydride microelectrodes : In situ monitoring of pH variations in a porous medium. Analytical Chemistry, 86 (12), pp. 5758-5765.

Shanks, J. D. and Walker, P., 2005. Experimental performance of mortice and tenon connections in green oak. The Structural Engineer, 83, 40--45.

Shanks, J. D. and Walker, P., 2006. Lateral strength of green oak frames: physical testing and modelling. The Structural Engineer, 84, 34--38.

Shanks, J. D., Chang, W. S. and Komatsu, K., 2008. Experimental study on mechanical performance of all-softwood pegged mortice and tenon connections. Biosystems Engineering, 100 (4), pp. 562-570.

Shanks, K. B. P., Lo, S. N. and Norton, B., 2006. Appropriate energy efficient building envelope technologies for social housing in the Irish climate. Journal of Housing and the Built Environment, 21 (2), pp. 191-202.

Sharma, G. D., Kurchania, R., Ball, R. J., Roy, M. S. and Mikroyannidis, J. A., 2012. Effect of deoxycholic acid on the performance of liquid electrolyte dye-sensitized solar cells using a perylene monoimide derivative. International Journal of Photoenergy, 2012, 983081.

Sharma, G. D., Mikroyannidis, J. A., Roy, M. S., Justin Thomas, K. R., Ball, R. and Kurchania, R., 2012. Dithienylthienothiadiazole-based organic dye containing two cyanoacrylic acid anchoring units for dye-sensitized solar cells. RSC Advances, 2 (30), pp. 11457-11464.

Sharma, G. D., Prakash Singh, S., Nagarjuna, P., Mikroyannidis, J. A., Ball, R. J. and Kurchania, R., 2013. Efficient dye-sensitized solar cells based on cosensitized metal free organic dyes with complementary absorption spectra. Journal of Renewable and Sustainable Energy, 5 (4), 043107.

Sharples, S. and Shea, A. D., 2000. Daylight transmission of atrium roofs under overcast and partly cloudy skies. Lighting Research and Technology, 32 (3), pp. 153-155.

Sharples, S. and Shea, A. D., 1999. Roof obstructions and daylight levels in atria: a model study under real skies. Lighting Research and Technology, 31 (4), pp. 181-185.

Shave, J. D., Ibell, T. J. and Denton, S. R., 2007. Shear assessment of reinforced concrete bridges with short anchorage lengths. The Structural Engineer, 85 (5), pp. 30-37.

Shea, A. D., Robertson, A. P., Levermore, G. J. and Rideout, N. M., 2010. Measurements of the performance of a wind-driven ventilation terminal. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 163 (2), pp. 129-136.

Shea, A. D., Wall, K. and Walker, P., 2013. Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system. Building Services Engineering Research and Technology, 34 (4), pp. 369-380.

Shea, A., Lawrence, M. and Walker, P., 2012. Hygrothermal performance of an experimental hemp-lime building. Construction and Building Materials, 36, pp. 270-275.

Shepherd, P., 2011. A Mathematician's Apogee. Mathematics Today, 47 (4), pp. 166-171.

Shepherd, P. and Richens, P., 2012. The case for subdivision surfaces in building design. Journal of the International Association for Shell and Spatial Structures, 53 (4), pp. 237-245.

Shepherd, P. G. and Burgess, I. W., 2011. On the buckling of axially restrained steel columns in fire. Engineering Structures, 33 (10), pp. 2832-2838.

Shepherd, P. G., Hudson, R. and Hines, D., 2011. Aviva Stadium: a parametric success. International Journal of Architectural Computing, 9 (2), pp. 167-186.

Silva Santos, C. M. and Greaves, D. M., 2007. A mixed Lagrangian-Eulerian method for non-linear free-surface flows. Computers and Fluids, 36 (5), pp. 914-923.

Silva Santos, C. M. and Greaves, D., 2007. Using hierarchical Cartesian grids with multigrid acceleration. International Journal for Numerical Methods in Engineering, 69 (8), pp. 1755-1774.

Simm, S. and Coley, D., 2011. The relationship between wall reflectance and daylight factor in real rooms. Architectural Science Review, 54 (4), pp. 329-334.

Singh, M., Kurchania, R., Pockett, A., Ball, R., Koukaras, E.,