Items by Vogwell, Jeffrey

2011

Chakherlou, T. N., Mirzajanzadeh, M., Vogwell, J. and Abazadeh, B., 2011. Investigation of the fatigue life and crack growth in torque tightened bolted joints. Aerospace Science and Technology, 15 (4), pp. 304-313.

Mirzajanzadeh, M., Chakherlou, T. N. and Vogwell, J., 2011. The effect of interference-fit on fretting fatigue crack initiation and K of a single pinned plate in 7075 Al-alloy. Engineering Fracture Mechanics, 78 (6), pp. 1233-1246.

Minguez, J. M. and Vogwell, J., 2011. Optimisation of a beam in bending subjected to severe inertia impact loading. Engineering Failure Analysis, 18 (1), pp. 117-123.

2009

Chakherlou, T. N., Mirzajanzadeh, M. and Vogwell, J., 2009. Effect of hole lubrication on the fretting fatigue life of double shear lap joints: An experimental and numerical study. Engineering Failure Analysis, 16 (7), pp. 2388-2399.

Chakherlou, T. N., Mirzajanzadeh, M. and Vogwell, J., 2009. Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints. Engineering Failure Analysis, 16 (7), pp. 2066-2080.

Vogwell, J. and Minguez, J. M., 2009. Damage in a bobsleigh start track braking system. Engineering Failure Analysis, 16 (4), pp. 1109-1117.

Chakherlou, T. N., Abazadeh, B. and Vogwell, J., 2009. The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks. Engineering Failure Analysis, 16 (1), pp. 242-253.

2008

Minguez, J. M. and Vogwell, J., 2008. An analytical model to study the radial stiffness and spoke load distribution in a modern racing bicycle wheel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (4), pp. 563-576.

Chakherlou, T. N., Oskouei, R. H. and Vogwell, J., 2008. Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates. Engineering Failure Analysis, 15 (5), pp. 563-574.

2007

Vogwell, J. and Minguez, J. M., 2007. The safety of rock climbing protection devices under falling loads. Engineering Failure Analysis, 14 (6), pp. 1114-1123.

Vogwell, J. and Minguez, J. M., 2007. Wire cable failures in climbing anchor chocks. Advances in Composite Materials and Structures, Parts 1 and 2, 348-349, pp. 165-168.

2006

Minguez, J. M. and Vogwell, J., 2006. Effect of torque tightening on the fatigue strength of bolted joints. Engineering Failure Analysis, 13 (8), pp. 1410-1421.

Minguez, J. M. and Vogwell, J., 2006. Fatigue life of an aerospace aluminium alloy subjected to cold expansion and a cyclic temperature regime. Engineering Failure Analysis, 13 (6), pp. 997-1004.

Fisher, S., Vogwell, J. and Ansell, M. P., 2006. Measurement of hand loads and the centre of percussion of cricket bats. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials - Design and Applications, 220 (L4), pp. 249-258.

2005

Minguez, J. M. and Vogwell, J., 2005. Theoretical analysis of preloaded bolted joints subjected to cyclic loading. International Journal of Mechanical Engineering Education, 33 (4), pp. 349-357.

Blackmore, S., Vogwell, J., Turner, I. G. and Brown, S. R., 2005. Development of Testing Techniques To Assess The Integrity of Film Coated Tablets 2. In: Proceedings of the British Pharmaceutical Conference,, 2005-01-01, Manchester.

Blackmore, S., Vogwell, J., Turner, I. G. and Brown, S. R., 2005. Development of Tests to Measure the Impact and Abrasion Properties of Film-Coated Tablets 1. In: Proceedings of the British Pharmaceutical Conference,, 2005-01-01, Manchester.

2004

Chakherlou, T. N. and Vogwell, J., 2004. A novel method of cold expansion which creates near-uniform compressive tangential residual stress around a fastener hole. Fatigue & Fracture of Engineering Materials & Structures, 27 (5), pp. 343-351.

Blackmore, S. J., Salmon, K., Turner, I. G., Vogwell, J. and Brown, S. R., 2004. Development of Testing Methods to Test The Integrity of Film Coatings. In: British Pharmacological Society Annual Conference, 2004-01-01, Manchester.

Blackmore, S., Salmon, K., Vogwell, J. and Turner, I. G., 2004. Development of a test to measure the impact properties of coated tablets. Supplement to Journal of Pharmacy and Pharmacology, S49, Vol 56.

2003

Chakherlou, T. N. and Vogwell, J., 2003. The effect of cold expansion on improving the fatigue life of fastener holes. Engineering Failure Analysis, 10 (1), pp. 13-24.

Minguez, J. M. and Vogwell, J., 2003. The stress distribution over open and closed welded joints. Engineering Failure Analysis, 10 (1), pp. 103-111.

1996

Culley, S. J. and Vogwell, J., 1996. Computer-aided design education. In: Proc. 18th Annual Design Conference, 1996-06-01, University of Bristol.

1990

Culley, S. J. and Vogwell, J., 1990. The role of feedback in component selection software. In: SERC's ACME Annual Conference, 1990-09-01, University of Birmingham.

Culley, S. J. and Vogwell, J., 1990. The role of feedback in computer-aided design systems. In: Proceedings of the Biannual Congress of the Canadian society of Mechanical Engineers, 1990-06-01, Toronto.

Culley, S. J., Vogwell, J. and Corderoy, M. P., 1990. A systems approach to component selection.

1989

Culley, S. J. and Vogwell, J., 1989. Evaluation and feedback techniques for computer aided information handling systems. In: Proceedings of the Mechanical Engineers Effective CADCAM '89 4th European Conference, 1989-11-01, London.