Research

Items by Burrows, Clifford

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 125.

Sahinkaya, M. N., Abulrub, A. H. G. and Burrows, C. R., 2011. An adaptive multi-objective controller for flexible rotor and magnetic bearing systems. Journal of Dynamic Systems Measurement and Control - Transactions of the ASME, 133 (3), 031003.

Sahinkaya, M. N., Abulrub, A. H. G., Keogh, P. S. and Burrows, C. R., 2011. Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 133 (2), 022503.

Sahinkaya, M. N., Abulrub, A. H. G., Burrows, C. R. and Keogh, P. S., 2010. A multiobjective adaptive controller for magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 132 (12), 122503.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2010. An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 132 (5), 052502.

Abulrub, A. H., Sahinkaya, M. N. and Burrows, C., 2010. An adaptive weighting control strategy to avoid magnetic bearing contact. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. New York: ASME, pp. 741-747.

Cade, L. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2010. Destabilization of forward rub in rotor magnetic bearing systems using actively controlled auxiliary bearings. In: Proceedings of the Asme Turbo Expo 2010. Vol. 6. New York: ASME, pp. 273-282.

Sahinkaya, M. N., Abulrub, A. N. G., Keogh, P. S. and Burrows, C. R., 2010. Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. In: Proceedings of the ASME Turbo Expo 2010. Vol. 6. New York: ASME, pp. 399-408.

Burrows, C. R., Keogh, P. S. and Sahinkaya, M. N., 2009. Progress towards smart rotating machinery through the use of active bearings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (12), pp. 2849-2859.

Sahinkaya, M. N., Abulrub, A. H., Keogh, P. and Burrows, C., 2009. A multi-objective adaptive controller for magnetic bearing systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 6. New York: ASME, pp. 1063-1071.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2009. An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 6. New York: ASME, pp. 855-865.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2009. On the use of actively controlled auxiliary bearings in magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 131 (2), 022507.

Keogh, P., Sahinkaya, M. N., Burrows, C. and Cade, I., 2008. Rotor/auxiliary bearing dynamic contact modes in magnetic bearing systems. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 16 (4), pp. 266-271.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. On the use of auxiliary bearing to escape trapped contact modes in rotor/magnetic bearings. In: 9th International Conference on Vibrations in Rotating Machinery, 2008-09-07 - 2008-09-11, University of Exeter, Exeter.

Abulrub, A. H. G., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2008. Performance Assessment of a Multi-Frequency Controller Applied to a Flexible Rotor Magnetic Bearing System - Contact Dynamics. In: Ulbrich, H. and Ginzinger, L., eds. 9th International Conference on Motion and Vibration Control, 2008-09-15 - 2008-09-18, Munich.

Abulrub, A. H., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. Performance assessment of a multi-frequency controller applied to a flexible rotor magnetic bearing system - contact dynamics. In: 9th International Conference on Motion and Vibration Control, 2008-09-15 - 2008-09-18, Munich.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. On the design of an active auxiliary bearing for rotor/magnetic bearing systems. In: 11th International Symposium on Magnetic Bearings, 2008-08-26 - 2008-08-29, Nara.

Abulrub, A. H., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. Robustness of recursive auto-tuning strategy in flexible rotor and magnetic bearing systems. In: 11th International Symposium on Magnetic Bearings, 2008-08-26 - 2008-08-29, Nara.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2008. On the use of actively controlled auxiliary bearings in magnetic bearning systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin.

Cade, I. S., Keogh, P. S., Sahinkaya, M. N. and Burrows, C. R., 2007. Wavelet coefficient characteristics during rotor/auxiliary bearing contact in active magnetic bearing systems. In: ASME International Design Engineering Technical Conferences (IDETC), 2007-09-01, Las Vegas.

Sahinkaya, M. N., Abulrub, A. H. G., Keogh, P. S. and Burrows, C. R., 2007. Multiple sliding and rolling contact dynamics for a flexible rotor/magnetic bearing system. IEEE - ASME Transactions on Mechatronics, 12 (2), pp. 179-189.

Abulrub, A. G., Sahinkaya, M. N., Keogh, P. and Burrows, C., 2006. A constrained Lagrangian approach for modelling multiple contacts of flexible rotors. In: IFToMM 7th International Conference on Rotor Dynamics, 2006-09-01, Vienna.

Keogh, P. S., Sahinkaya, M. N., Burrows, C. R. and Sathujoda, P., 2006. Wavelet based adaption of H-infinity controllers in flexible rotor/magnetic bearing systems. In: IFToMM 7th International Conference on Rotor Dynamics, 2006-09-01, Vienna.

Abulrub, A. G., Sahinkaya, M. N., Keogh, P. S. and Burrows, C. R., 2006. Experiments on ROLAC to recover rotor position following contact. In: 10th International Symposium on Magnetic Bearings, 2006-08-01, Martigny.

Abulrub, A. G., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2006. Adaptive control of active magnetic bearings to prevent rotor-bearing contact. In: 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, 2006-11-05 - 2006-11-10, Chicargo.

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. N., 2006. Adaptive control of rotor vibration using compact wavelets. Journal of Vibration and Acoustics-Transactions of the Asme, 128 (5), pp. 653-665.

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. N., 2006. Wavelet domain control of rotor vibration. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (2), pp. 167-184.

Abulrub, A. G., Sahinkaya, M. N., Keogh, P. S. and Burrows, C. R., 2005. Effective model reduction for magnetically levitated flexible rotors including contact dynamics, Symposium on Modeling, Vibration, and Control of Rotor Systems. In: ASME 2005 International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, 2005-09-01, Long Beach, California.

Johnston, D. N., Burrows, C. R. and Edge, K. A., 2005. Power Transmission and Motion Control (PTMC 2005). John Wiley & Sons.

Keogh, P. S., Cole, M. O. T., Sahinkaya, M. N. and Burrows, C. R., 2004. On the control of synchronous vibration in rotor/magnetic bearing systems involving auxiliary bearing contact. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 126 (2), pp. 366-372.

Burrows, C. R., 2004. Fluid Power Technology - A case for global collaboration. Journal of the Korean Fluid Power Systems Society, 1, 3--9 (Invited paper to launch a new journal).

Burrows, C. R., Edge, K. A. and Johnston, D. N., 2004. Bath Workshop on Power Transmission and Motion Control, PTMC 2004. In: Bath Workshop on Power Transmission and Motion Control, 2004-01-01, Bath.

Pollmeier, K., Burrows, C. R. and Edge, K. A., 2004. Condition monitoring of an electrohydraulic position control system using artificial neural networks. In: ASME International Mechanical Engineering Congress and Exposition, 2006-11-05 - 2006-11-10, Chicago, IL..

Burrows, C. R., Johnston, D. N. and Edge, K. A., 2004. Power Transmission and Motion Control (PTMC 2004). London and Bury St Edmunds: Professional Engineering Publishing Ltd.

Cole, M. O. T., Keogh, P. S., Sahinkaya, M. N. and Burrows, C. R., 2004. Towards fault-tolerant active control of rotor-magnetic bearing systems. Control Engineering Practice, 12 (4), pp. 491-501.

McManus, M. C., Hammond, G. P. and Burrows, C. R., 2003. Life-cycle assessment of mineral and rapeseed oil in mobile hydraulic systems. The Journal of Industrial Ecology, 7 (3-4), pp. 163-177.

Burrows, C. R. and Edge, K. A., 2003. Power Transmission and Motion Control (PTMC 2003). London and Bury St Edmunds: Professional Engineering Publishing Ltd.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2003. Robust control of multiple discrete frequency vibration components in rotor - Magnetic bearing systems. JSME International Journal Series C-Mechanical Systems Machine Elements and Manufacturing, 46 (3), pp. 891-899.

Sahinkaya, M. N. and Burrows, C. R., 2002. Stabilisation of high-speed flexible rotors supported by oil-film bearings. In: IFToMMSixth International Conference on Rotor Dynamics, 2002-09-01, Sydney.

Sahinkaya M N, [N. V.], Cole, M. O. T. and Burrows, C. R., 2002. On the use of Schroeder Phased Harmonic Sequences for the multi-frequency vibration control of flexible rotor/magnetic bearing systems. In: Proceedings of The Eight International Symposium on Magnetic Bearings (ISMB-8),, 2002-08-01, Mito.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. Predictions on the dynamic behaviour of a rolling element auxiliary bearing for rotor/AMB systems. In: 8th International Symposium on Magnetic Bearings, 2002-08-01, Mito.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. The dynamic behavior of a rolling element auxiliary bearing following rotor impact. Journal of Tribology-Transactions of the Asme, 124 (2), pp. 406-413.

Keogh, P. S., Cole, M. O. T., Sahinkaya, M. N. and Burrows, C. R., 2002. On the control of synchronous vibration in rotor/magnetic bearing systems involving auxiliary bearing contact. In: ASME TURBO 2002, 2002-06-01, Amsterdam.

Keogh, P. S., Cole, M. O. T. and Burrows, C. R., 2002. Multi-state transient rotor vibration control using sampled harmonics. Journal of Vibration and Acoustics-Transactions of the Asme, 124 (2), pp. 186-197.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. Control of multifrequency rotor vibration components. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216 (2), pp. 165-177.

Burrows, C. R. and Edge, K. A., 2002. Power Transmission and Motion Control (PTMC 2002). London and Bury St Edmunds, UK: Professional Engineering Publishing Ltd.

Cole, M. O. T., Keogh, P. S., Sahinkaya, M. N. and Burrows, C. R., 2002. Progress towards fault-tolerant active control of rotor-magnetic bearing systems. In: UKACC Conference Control 2002, 2002-01-01, Sheffield.

Sahinkaya, M. N., Cole, M. O. T. and Burrows, C. R., 2001. Fault detection and tolerance in synchronous vibration control of rotor-magnetic bearing systems. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (12), pp. 1401-1416.

Sahinkaya, M. N., Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2001. Detection of feedback related faults in magnetic bearing/rotor systems using synchronous control techniques. In: International Symposium on Stability Control of Rotating Machinery (ISCORMA-1), 2001-08-01.

Burrows, C. R. and Edge, K. A., 2001. Power Transmission and Motion Control (PTMC 2001). London and Bury St Edmunds, UK: Professional Engineering Publishing Ltd.

Cole, M.O.T., Keogh, P.S. and Burrows, C.R., 2000. Fault-tolerant control of rotor/magnetic bearing systems using reconfigurable control with built-in fault detection. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214 (12), pp. 1445-1466.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2000. Adaptive-Q control of vibration due to unknown disturbances in rotor/magnetic bearing systems. In: Proceedings of the 2000 IEEE International Conference on Control Applications. Vol. 1. Piscataway, U. S. A.: IEEE, pp. 965-970.

McManus, M. C., Hammond, G. P. and Burrows, C. R., 2000. Life Cycle Assessment of Alternative Hydraulic Fluids for Municipal Cleaning Equipment. In: Proceedings of the National Fluid Power Association International Exposition for Power Transmission, 2000-01-01, Chicago.

McManus, M. C., Hammond, G. P. and Burrows, C. R., 2000. Life Cycle Assessment, Data Quality and Sensitivity Analysis: The case of Mobile Fluid Power Systems. In: International Conference of Life Cycle Assessment, 2000-01-01, Washington D.C.

Burrows, C. R. and Edge, K. A., 2000. Power Transmission and Motion Control (PTMC 2000). London and Bury St Edmunds: Professional Engineering Publishing Ltd.

Weber, S. T., Johnston, D. N., Edge, K. A. and Burrows, C. R., 2000. Recent research into cartridge style hydraulic valves. In: PTMC 2000, 2000-01-01, Bath.

Deacon, M., Brace, C. J., Vaughan, N. D., Burrows, C. R. and Horrocks, R. W., 1999. Impact of alternative controller strategies on exhaust emissions from an integrated diesel/continuously variable transmission powertrain. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 213 (2), pp. 95-107.

Burrows, C. R., Hammond, G. P. and McManus, M. C., 1999. Life Cycle Assessment of Mobile Hydraulic Systems. In: IMechE Seminar, 1999-11-04.

Burrows, C. R., Hammond, G. P. and McManus, M. C., 1999. Life Cycle Assessment of Some Mobile Hydraulic Systems. In: The Sixth Scandinavian International Conference on Fluid Power, SICFP '99, 1999-05-26 - 1999-05-28, Tampere.

Burrows, C. R., Hammond, G. P. and McManus, M. C., 1999. Non-Food Crops; Call for Evidence; Submission to the Select Committee on Science and Technology Sub-Committee. Other. Unkown Publisher.

Burrows, C. R. and Edge, K. A., 1999. Power Transmission and Motion Control (PTMC 1999). London and Bury St Edmunds, UK: Professional Engineering Publishing Ltd.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 1998. Vibration control of a flexible rotor/magnetic bearing system subject to direct forcing and base motion disturbances. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212 (7), pp. 535-546.

Pollmeier, K., Burrows, C. R. and Edge, K. A., 1998. Non-linear parameter identification using genetic algorithms. In: Internationalites Fluidtechnisches Kolloquium, 1998-03-01, Aachen.

Burrows, C. R. and Edge, K. A., 1998. Bath Workshop on Power Transmission and Motion Control (PTMC 98). In: Bath Workshop on Power Transmission and Motion Control (PTMC 98), 1998-01-01, Bath.

Crowther, W. J., Edge, K. A., Burrows, C. R., Atkinson, R. M. and Woollons, D. J., 1998. Fault diagnosis of a hydraulic actuator circuit using neural networks - an output vector space classification approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 212 (I1), pp. 57-68.

Burrows, C. R., Hammond, G. P. and McManus, M. C., 1998. Life-Cycle Assessment of Oil Hydraulic Systems for Environmentally Sensitive Applications. In: ASME International Mechanical Engineering Congress and Exposition, 1998-11-15 - 1998-11-20, Anaheim, California.

Bull, D. R., Burrows, C. R. and Edge, K. A., 1997. Failure modes and effects analysis of a simple hydrostatic transmission using order of magnitude reasoning. In: 11th European Simulation Multiconference (ESM 97), 1997-06-01, Turkey.

Bull, D. R., Stecki, J. S., Edge, K. A. and Burrows, C. R., 1997. Failure modes and effects analysis of a valve-controlled hydrostatic drive. In: Challenges and Solutions: Tenth Bath International Fluid Power Workshop, 1997-09-10 - 1997-09-12, Bath.

Burrows, C. R. and Edge, K. A., 1997. Fluid power engineering: challenges and solutions - Tenth Bath International Fluid Power Workshop. In: 10th Bath International Fluid Power Workshop, 1997-01-01, Bath.

Burrows, C. R. and Edge, K. A., 1997. Fluid power systems: 9th Bath International Fluid Power Workshop. In: 9th Bath International Fluid Power Workshop, 1997-01-01, Taunton.

Shu, J. J., Burrows, C. R. and Edge, K. A., 1997. Pressure pulsations in reciprocating pump piping systems .1. Modelling. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 211 (3), pp. 229-237.

Edge, K. A., Boston, O. P., Xiao, S., Longvill, M. J. and Burrows, C. R., 1997. Pressure pulsations in reciprocating pump piping systems .2. Experimental investigations and model validation. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 211 (3), pp. 239-250.

Hawkins, P. G., Atkinson, R. M., Woollons, D. J., Bull, D. R., Edge, K. A. and Burrows, C. R., 1996. Approach to failure modes and effects analysis using multiple models. In: International Functional Modelling and Application Association. Proceedings of the Fourth International Workshop on Functional Modelling of Complex Technical Systems, 1996-06-01, Athens.

Bull, D. R., Burrows, C. R., Edge, K. A., Hawkins, P. G. and Woollons, D. G., 1996. Order of magnitude reasoning for automated failure modes and effects analysis of hydraulic systems. In: Modelling and Simulation 1996, 1996-06-01, Budapest.

Crowther, W. J., Edge, K. A., Burrows, C. R., Atkinson, R. M. and Woollons, D. J., 1996. Automated FMEA for hydraulic systems. In: 12th Colloquium on Fluid Power Technology, 1996-03-01, Aachen.

Pollmeier, K., Strossenreuther, F., Edge, K. A. and Burrows, C. R., 1996. Identification of non-linear components for condition monitoring in hydraulic systems. In: 12th Colloquium on Fluid Power Technology, 1996-03-01, Aachen.

Atkinson, R. M., Woollons, D. J., Crowther, W. J., Burrows, C. R. and Edge, K. A., 1996. A neural network approach to fault diagnosis in electro-hydraulic systems. In: COMADEM ‘96, 1996-01-01, Sheffield.

Hogan, P. A., Burrows, C. R., Edge, K. A., Atkinson, R. M., Montakhab, M. R. and Woollons, D. J., 1996. Automated fault tree analysis for hydraulic systems. Journal of Dynamic Systems Measurement and Control - Transactions of the ASME, 118 (2), pp. 278-282.

Bull, D. R., Burrows, C. R., Edge, K. A., Hawkins, P. G. and Woollons, D. J., 1996. Computational tool for failure modes and effects analysis of hydraulic systems. American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division (Publication) FPST, 3, pp. 113-118.

Tomlinson, S.P. and Burrows, C.R., 1996. Design of a feedback controlled thermostat for a vehicle cooling system. In: International Off-Highway and Powerplant Congress and Exposition, 1996-08-26 - 1996-08-28, Indianapolis, IN.

Atkinson, R. M., Woollons, D. J., Tasson, S., Crowther, W. J., Burrows, C. R. and Edge, K. A., 1996. Fault diagnosis in electro-hydraulic systems using neural networks. In: BHR Group 5th International Conference on Profitable Condition Monitoring, 1996-12-03 - 1996-12-04, Harrogate.

Pollmeier, K., Burrows, C. R. and Edge, K. A., 1996. Mapping of large scale fluid power system simulations on a distributed memory parallel computer using genetic algorithms. American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division (Publication) FPST, 3, pp. 83-91.

Edge, K. A., Burrows, C. R. and Lecky-Thompson, N., 1996. Modelling of cavitation in a reciprocating plunger pump. In: 3rd JHPS International Symposium on Fluid Power, 1996-11-04 - 1996-11-06, Yokohama.

Pollmeier, K., Burrows, C. R. and Edge, K. A., 1996. Partitioned simulation of fluid power systems - An approach for reduced communication between processors. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 210 (4), pp. 221-230.

Hampson, S.P., Chawdhry, P.K. and Burrows, C.R., 1996. Robust control of hydraulic servos. In: International Off-Highway and Powerplant Congress and Exposition, 1996-08-26 - 1996-08-28, Indianapolis, IN.

Vaughan, N.D., Gübeli, M. and Burrows, C.R., 1996. The effect of hydraulic circuit design and control on the efficiency of a continuously variable transmission. In: International Off-Highway and Powerplant Congress and Exposition, 1996-08-26 - 1996-08-28, Indianapolis, IN.

Edge, K. A., Boston, O. P., Burrows, C. R., Darling, J., Woollons, D. J., Atkinson, R. M. and Hawkins, P. G., 1995. An approach to automated fault diagnosis of hydraulic circuits. In: ASME International Mechanical Engineering Congress and Exposition, 1995-11-12 - 1995-11-17, San Francisco, Cal.

Bull, D. R., Burrows, C. R., Crowther, W. J., Edge, K. A., Atkinson, R. M., Hawkins, P. G. and Woollons, D. J., 1995. Approaches to automated FMEA of hydraulic systems. In: Aerotech: Hydraulic Systems Design for the Future, IMechE Seminar, 1995-10-17 - 1995-10-19, NEC Birmingham.

Burrows, C. R. and Edge, K. A., 1995. Innovations in fluid power: 7th Bath International Fluid Power Workshop. In: 7th Bath International Fluid Power Workshop, 1995-01-01, Taunton.

Crowther, W. J., Bull, D. R., Burrows, C. R., Edge, K. A., Atkinson, R. M., Hawkins, P. G. and Woollons, D. J., 1995. Knowledge acquisition for engineering systems using bond graphs. In: British Computer Society SGES Annual Conference ES ‘95, 1995-12-11 - 1995-12-13, Cambridge.

Hogan, P. A., Burrows, C. R. and Edge, K. A., 1994. Automated failure mode and effects analysis of hydraulic systems. In: Seminar on Hydraulic Systems Reliability & Safety, 1994-04-20, London.

Edge, K. A., Xiao, S., Burrows, C. R. and Shu, J. J., 1994. Flow visualisation of cavitation in a reciprocating plunger pump using high-speed cinematography. In: Fourth Triennial International Symposium on Fluid Control, Fluid Measurement, Fluid Mechanics, Visualization, Fluidic; Flucome '94, 1994-01-01, Toulouse.

Burton, J. D., Edge, K. A. and Burrows, C. R., 1994. Modeling Requirements for the Parallel Simulation of Hydraulic Systems. Journal of Dynamic Systems Measurement and Control - Transactions of the ASME, 116 (1), pp. 137-145.

Burrows, C. R. and Edge, K. A., 1994. Modelling and simulation: 6th Bath International Fluid Power Workshop. In: 6th Bath International Fluid Power Workshop, 1994-01-01, Taunton, Somerset.

Hogan, P., Burrows, C. R. and Edge, K. A., 1994. Use of qualitative simulation in automated failure modes and effects analysis. Oledinamica Pneumatic, 3, pp. 153-157.

Burton, J. D., Edge, K. A. and Burrows, C. R., 1993. Analysis of an electro-hydraulic position control servo-system using transmission-line modelling (TLM). In: 2nd JHPS International Symposium on Fluid Power, 1993-09-01, Japan.

Burton, J. D., Edge, K. A. and Burrows, C. R., 1993. Computational load balancing of parallel hydraulic circuit simulations employing variable time step transmission line modelling. In: 3rd Scandinavian International Conference Fluid Power, 1993-05-01, Linkoping.

Atkinson, R. M., Montakhab, M. R., Woollons, D. J., Hogan, P. A., Burrows, C. R. and Edge, K. A., 1993. DESHC: A diagnostic expert system for hydraulic circuits. In: CERT-ONERA International Conference on Fault Diagnosis. Toulouse, France, 1993-04-01.

Burrows, C. R., Tilley, D. G., Edge, K. A. and Chapple, P. J., 1993. Approach to the design of fluid power systems. In: ASME WAM, 1993-01-01, New Orleans, LA.

Hogan, P. A., Burrows, C. R., Edge, K. A., Atkinson, R. M., Montakhab, M. R. and Woollons, D. J., 1993. Automated fault tree analysis for hydraulic systems. In: ASME WAM, 1993-01-01, New Orleans, LA.

Burrows, C. R. and Edge, K. A., 1993. Circuit, component and system design: 5th Bath International Fluid Power Workshop. In: 5th Bath International Fluid Power Workshop, 1993-01-01, Taunton.

Burrows, C. R. and Edge, K. A., 1993. Joint research between universities, industry and government - a UK perspective. Journal of the Japan Hydraulics and Pneumatics Society, 24 (3).

Burton, J. D., Edge, K. A. and Burrows, C. R., 1993. Partitioned simulation of hydraulic systems using transmission-line modelling. In: ASME WAM, 1993-01-01, New Orleans, LA.

Sanada, K., Richards, C. W., Longmore, D. K., Johnston, D. N. and Burrows, C. R., 1993. Practical requirements for modelling the dynamics of hydraulic pipelines. In: 2nd JHPS International Symposium on Fluid Power, 1993-09-01, Japan.

Shu, J., Edge, K. A., Burrows, C. R. and Xiao, S., 1993. Transmission line modelling with vaporous cavitation. In: ASME WAM, 1993-01-01, New Orleans, LA.

Davison, P., Longmore, D. K., Burrows, C. R. and Edge, K. A., 1992. Automatic model generation in hybrid system design.

Vaughan, N. D., Johnston, N., Burnell, L. R., Burrows, C. R. and Edge, K. A., 1992. The use of computational fluid dynamics in hydraulic valve design. In: Bath International Fluid Power Workshop, 1994-09-01.

Woollons, D. J., Atkinson, R. M., Pillay, K. D., Burrows, C. R., Hogan, P. A. and Edge, K. A., 1992. Fault diagnosis for condition monitoring of hydraulic circuits. In: Aerotech 92 - I.Mech.E Aerospace & Airport Technology Exhibition & Congress. Seminar No C428/12, 1992-02-01.

Atkinson, R. M., Pillay, K. D., Woollons, D. J., Burrows, C. R., Edge, K. A. and Hogan, P. A., 1992. Model-based fault diagnosis of hydraulic circuits. In: IEE Computing and Control Division Colloquium on Intelligent Fault Diagnosis, Part 2 Model-based Techniques, 1992-02-01, London.

Hogan, P. A., Burrows, C. R., Edge, K. A., Woollons, D. J. and Atkinson, R. M., 1992. A System for Diagnosing Faults in Hydraulic Circuits Based on Qualitative Modesl of Component Behavior. In: Fault Detection, Supervision and Safety for Technical Processes ( SAFEPROCESS 91 ), 1992-01-01.

Atkinson, R. M., Montakhab, M. R., Pillay, K. D., Woollons, D. J., Hogan, P. A., Burrows, C. R. and Edge, K. A., 1992. Automated fault analysis for hydraulic systems: Part 1 - fundamentals. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 206, pp. 207-214.

Hogan, P. A., Burrows, C. R., Edge, K. A., Atkinson, R. M., Montakhab, M. R. and Woollons, D. J., 1992. Automated fault analysis for hydraulic systems: part 2 - applications. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 206, pp. 215-224.

Burrows, C. R. and Edge, K. A., 1992. Fluid power systems, modelling and control: 4th Bath International Fluid Power Workshop. In: 4th Bath International Fluid Power Workshop, 1992-01-01, Taunton, Somt.

Burton, J. D., Edge, K. A. and Burrows, C. R., 1992. Modelling requirements for the parallel simulation of hydraulic systems. In: ASME WAM, 1993-01-01, New Orleans, LA.

Hogan, P. A., Burrows, C. R., Edge, K. A., Woollons, D. J. and Atkinson, R. M., 1991. A system for diagnosing faults in hydraulic circuits based on qualitative models of component behaviour. In: Proc IFAC/IMACS Symposium on Fault Detection, Supervision & Safety for Technical Processes, 1991-09-01, Baden-Baden.

Tilley, D. G., Richards, C. W., Tomlinson, S. P. and Burrows, C. R., 1991. Role of simulation in the design of fluid power systems. In: IFAC Symposium on Computer Aided Design in Control Systems, 1991-07-01, Swansea.

Wang, L. M., Burrows, C. R., Edge, K. A. and Chapple, P. J., 1991. A software package for on-line performance monitoring and fault diagnosis of hydraulic circuits. In: Seminar on Maintainability and Reliability of Hydraulic Systems. I.Mech.E., 1991-05-01, London.

Burrows, C. R. and Edge, K. A., 1991. Computers in fluid power: 3rd Bath International Fluid Power Workshop. In: 3rd Bath International Fluid Power Workshop, 1990-09-12 - 2009-09-13, Taunton, Somerset.

Burrows, C. R., Tomlinson, S. P. and Hogan, P. A., 1991. Some modelling aspects of Bathfp. In: Edge, K. A. and Burrows, C. R., eds. Fluid Power Systems Modelling and Control, Proceedings of the Fourth Bath International Fluid Power Workshop, 1991-01-01, Taunton, Somt.

Burrows, C.R., Tomlinson, S.P. and Hogan, P.A., 1991. Use of computer simulation in the design and selection of critical components in fluid power systems. In: International Off-Highway and Powerplant Congress and Exposition, 1991-09-08 - 1991-09-11, Milwaukee, WI.

Vaughan, N. D., Plummer, A., Burrows, C. and Edge, K., 1990. Some issues in pole placement control of electrohydraulic servosytems. In: 3rd Bath International Fluid Power Workshop, 1990-09-12 - 2009-09-13, Taunton, Somerset.

Burrows, C. R., Edge, K. A. and Vaughan, N. D., 1990. Some applications of hydraulics for control of vibrations and machines. In: Actuator 90: Proceedings of the Second International Technology-Transfer Congress, 1990-06-01, Bremen, FR Germany.

Darling, J. and Burrows, C. R., 1990. The control of propeller-induced vibrations in ship transmission shafts. In: 2nd Int Symp Magnetic Bearings, 1990-06-01, Tokyo.

Hogan, P. A., Burrows, C. R. and Edge, K. A., 1990. Development of a knowledge based system for the diagnosis of faults in hydraulic circuits.

Burrows, C. R. and Edge, K. A., 1990. Fluid power components & systems: 2nd Bath International Fluid Power Workshop. In: 2nd Bath International Fluid Power Workshop, 1990-01-01, Taunton, Somerset.

Burrows, C. R., Edge, K. A., Tilley, D. G. and Tomlinson, S. P., 1989. Fault diagnosis of fluid power systems using computer simulation - a first step towards an expert system. In: 2nd International Conf on Fluid Power Transmission and Control, 1989-03-01, Hangzhou, P.R.China..

This list was generated on Sun Dec 21 14:27:26 2014 GMT.