Research

Items by Keogh, Patrick

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 104.

Book Sections

Wang, M., Sahinkaya, M. N. and Keogh, P. S., 2013. Switching action in rotor-AMB systems for smooth vibration control. In: Proceedings of the ASME Turbo Expo. Vol. 7 A. San Antonio, U. S. A.: ASME, V07AT29A020.

Saket, F. Y., Sahinkaya, M. N. and Keogh, P. S., 2013. Touchdown bearing contact forces in magnetic bearing systems. In: Proceedings of the ASME Turbo Expo. Vol. 7 A. San Antonio, U. S. A.: ASME, V07AT29A021.

Ghorashi, A., Plummer, A., Edge, K. and Keogh, P., 2010. Accurate decoupled linear modeling for robust H∞ control of multi axis shaking tables. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. New York: ASME, pp. 1555-1562.

Cade, L. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2010. Destabilization of forward rub in rotor magnetic bearing systems using actively controlled auxiliary bearings. In: Proceedings of the Asme Turbo Expo 2010. Vol. 6. New York: ASME, pp. 273-282.

Sahinkaya, M. N., Abulrub, A. N. G., Keogh, P. S. and Burrows, C. R., 2010. Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. In: Proceedings of the ASME Turbo Expo 2010. Vol. 6. New York: ASME, pp. 399-408.

Sahinkaya, M. N., Abulrub, A. H., Keogh, P. and Burrows, C., 2009. A multi-objective adaptive controller for magnetic bearing systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 6. New York: ASME, pp. 1063-1071.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2009. An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 6. New York: ASME, pp. 855-865.

Keogh, P. and Cole, M. O. T., 2009. Dynamics and control issues for fault tolerance. In: Schweitzer, G. and Maslen, E. H., eds. Magnetic Bearings. Springer, pp. 407-433.

Schlotter, M. and Keogh, P. S., 2006. LMI gain-scheduled H∞ control of instationary flexible rotor/magnetic bearing systems. In: Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. ASME, pp. 789-797.

Keogh, P. S., Seow, Y. H. and Cole, M. O. T., 2005. Characteristics of a magnetically levitated flexible rotor when in contact with one or more auxiliary bearings. In: Proceedings of the ASME Turbo Expo, 2005. New York, U. S. A.: ASME, pp. 791-799.

Cole, M. O. T., Wongratanaphisan, T. and Keogh, P. S., 2005. On LMI-based optimization of vibration and stability in rotor system design. In: Proceedings of the ASME Turbo Expo, 2005. New York, U. S. A.: ASME, pp. 773-781.

Keogh, P. S. and Cole, M. O. T., 2004. Contact dynamic response with misalignment in a flexible rotor/magnetic bearing system. In: Proceedings of the ASME Turbo Expo, 2004. Vol. 6. U. S. A.: ASME, pp. 715-723.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2000. Adaptive-Q control of vibration due to unknown disturbances in rotor/magnetic bearing systems. In: Proceedings of the 2000 IEEE International Conference on Control Applications. Vol. 1. Piscataway, U. S. A.: IEEE, pp. 965-970.

Articles

Crosnier, E., Keogh, P. and Miles, A. W., 2014. A novel method to assess primary stability of press-fit acetabular cups. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 228 (11), pp. 1126-1134.

Griffiths, K., Shires, D., White, W., Keogh, P. S. and Hicks, B. J., 2013. Correlation study using scuffing damage to investigate improved simulation techniques for packaging vibration testing. Packaging Technology and Science, 26 (7), pp. 373-383.

Berg, F. T. N., Balchin, M. J. and Keogh, P. S., 2013. New principles for dynamic aircraft exergy mapping. AIAA Journal of Aircraft, 50 (4), pp. 1088-1098.

Keogh, P. S., 2012. Contact dynamic phenomena in rotating machines: active/passive considerations. Mechanical Systems and Signal Processing, 29, pp. 19-33.

Ginzinger, L., Sahinkaya, M. N., Heckmann, B., Keogh, P. and Ulbrich, H., 2011. On the optimization problem of model-based monitoring. Science China-Technological Sciences, 54 (5), pp. 1095-1106.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2011. Piezoelectrically actuated hydraulic valve design for high bandwidth and flow performance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (3), pp. 345-359.

Sahinkaya, M. N., Abulrub, A. H. G., Keogh, P. S. and Burrows, C. R., 2011. Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 133 (2), 022503.

Sahinkaya, M. N., Abulrub, A. H. G., Burrows, C. R. and Keogh, P. S., 2010. A multiobjective adaptive controller for magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 132 (12), 122503.

Branson, D., Johnston, D. N., Tilley, D., Bowen, C. and Keogh, P., 2010. Piezoelectric Actuation in a High Bandwidth Valve. Ferroelectrics, 408 (1), pp. 32-40.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2010. An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 132 (5), 052502.

Burrows, C. R., Keogh, P. S. and Sahinkaya, M. N., 2009. Progress towards smart rotating machinery through the use of active bearings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (12), pp. 2849-2859.

Fatola, B. O., Keogh, P. and Hicks, B., 2009. Modelling Flat Spring performance using FEA. Journal of Physics: Conference Series, 181 (1), 012011.

Bullock, A. K., Tilley, D. G., Johnston, D. N., Bowen, C. R. and Keogh, P. S., 2009. Non-linear friction in reciprocating hydraulic rod seals: Simulation and measurement. Journal of Physics: Conference Series, 181 (1), 012009.

Ouyang, X. P., Yang, H. H., Tilley, D. and Keogh, P., 2009. Research on screw in cartridge valves using piezoelectric actuator. Zhejiang Daxue Xuebao (Gongxue Ban), 43 (7), 1225-1229+1237.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2009. On the use of actively controlled auxiliary bearings in magnetic bearing systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 131 (2), 022507.

Keogh, P., Sahinkaya, M. N., Burrows, C. and Cade, I., 2008. Rotor/auxiliary bearing dynamic contact modes in magnetic bearing systems. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 16 (4), pp. 266-271.

Schlotter, M. and Keogh, P. S., 2008. The vibration control of speed-dependent flexible rotor/magnetic bearing systems using linear matrix inequality gain-scheduled H-∞ design. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 222 (2), pp. 97-107.

Branson, D. T., Keogh, P. S. and Tilley, D. G., 2008. Hydraulic actuation of multi-body structures through large-scale motions. Part 1: development and validation of system model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (2), pp. 181-193.

Branson, D. T., Keogh, P. S. and Tilley, D. G., 2008. Hydraulic actuation of multi-body structures through large-scale motions. Part 2: controller design and performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (3), pp. 365-375.

Yong, W. Y. and Keogh, P. S., 2007. Annular component transient thermoelastic analysis using a state space approach. Journal of Tribology-Transactions of the Asme, 129 (4), pp. 818-828.

Sahinkaya, M. N., Abulrub, A. H. G., Keogh, P. S. and Burrows, C. R., 2007. Multiple sliding and rolling contact dynamics for a flexible rotor/magnetic bearing system. IEEE - ASME Transactions on Mechatronics, 12 (2), pp. 179-189.

Cade, I. S., Keogh, P. S. and Sahinkaya, M. N., 2007. Rotor/active magnetic bearing transient control using wavelet predictive moderation. Journal of Sound and Vibration, 302 (1-2), pp. 88-103.

Schlotter, M. and Keogh, P. S., 2007. Synchronous position recovery control for flexible rotors in contact with auxiliary bearings. Journal of Vibration and Acoustics-Transactions of the Asme, 129 (5), pp. 550-558.

Keogh, P. S. and Yong, W. Y., 2007. Thermal assessment of dynamic rotor/auxiliary bearing contact events. Journal of Tribology-Transactions of the Asme, 129 (1), pp. 143-152.

Cade, I. S., Keogh, P. S. and Sahinkaya, M. N., 2007. Transient Rotor/Active magnetic bearing control using sampled wavelet coefficients. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 129 (2), pp. 549-555.

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. N., 2006. Adaptive control of rotor vibration using compact wavelets. Journal of Vibration and Acoustics-Transactions of the Asme, 128 (5), pp. 653-665.

Eaton, M., Keogh, P. S. and Edge, K. A., 2006. The modelling, prediction, and experimental evaluation of gear pump meshing pressures with particular reference to aero-engine fuel pumps. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 220 (I5), pp. 365-379.

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. N., 2006. Wavelet domain control of rotor vibration. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (2), pp. 167-184.

Cade, I. S., Keogh, P. S. and Sahinkaya, M. N., 2005. Fault identification in rotor/magnetic bearing systems using discrete time wavelet coefficients. IEEE - ASME Transactions on Mechatronics, 10 (6), pp. 648-657.

Cole, M. O. T., Keogh, P. S. and Wongratanaphisan, T., 2004. On LMI-based optimization of vibration and stability in rotor system design. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 128 (3), pp. 677-684.

Keogh, P. S., Cole, M. O. T., Sahinkaya, M. N. and Burrows, C. R., 2004. On the control of synchronous vibration in rotor/magnetic bearing systems involving auxiliary bearing contact. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 126 (2), pp. 366-372.

Keogh, P. S. and Cole, M. O., 2004. Contact dynamic response with misalignment in a flexible rotor/magnetic bearing system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 128 (2), pp. 362-369.

Cole, M. O. T., Keogh, P. S., Sahinkaya, M. N. and Burrows, C. R., 2004. Towards fault-tolerant active control of rotor-magnetic bearing systems. Control Engineering Practice, 12 (4), pp. 491-501.

Cole, M. O. T. and Keogh, P. S., 2003. Asynchronous periodic contact modes for rotor vibration within an annular clearance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (10), pp. 1101-1115.

Tilley, D. G., Keogh, P. S., Mutch, K., Robotham, M., Curran, P. and Mehrkar-Asl, S., 2003. Making the eye blink - modelling the operation of the Gateshead Millennium Bridge. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (7), pp. 735-758.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2003. Robust control of multiple discrete frequency vibration components in rotor - Magnetic bearing systems. JSME International Journal Series C-Mechanical Systems Machine Elements and Manufacturing, 46 (3), pp. 891-899.

Cole, M. O. T. and Keogh, P. S., 2003. Rotor vibration with auxiliary bearing contact in magnetic bearing systems Part 2 : robust synchronous control for rotor position recovery. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (4), pp. 393-410.

Keogh, P. S. and Cole, M. O. T., 2003. Rotor vibration with auxiliary bearing contact in magnetic bearing systems part 1 : synchronous dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (4), pp. 377-392.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. The dynamic behavior of a rolling element auxiliary bearing following rotor impact. Journal of Tribology-Transactions of the Asme, 124 (2), pp. 406-413.

Keogh, P. S., Cole, M. O. T. and Burrows, C. R., 2002. Multi-state transient rotor vibration control using sampled harmonics. Journal of Vibration and Acoustics-Transactions of the Asme, 124 (2), pp. 186-197.

Leonard, L., Sirkett, D. M., Langdon, I. J., Mullineux, G., Tilley, D. G., Keogh, P. S., Cunningham, J. L., Cole, M. O. T., Prest, P. H., Miles, A. W. and Giddins, G. E. B., 2002. Engineering a new wrist joint replacement prosthesis - A multidisciplinary approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (9), pp. 1297-1302.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. Control of multifrequency rotor vibration components. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216 (2), pp. 165-177.

Keogh, P. S. and Khonsari, M. M., 2001. Influence of inlet conditions on the thermohydrodynamic state of a fully circumferentially grooved journal bearing. Journal of Tribology-Transactions of the Asme, 123 (3), pp. 525-532.

Cole, M.O.T., Keogh, P.S. and Burrows, C.R., 2000. Fault-tolerant control of rotor/magnetic bearing systems using reconfigurable control with built-in fault detection. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214 (12), pp. 1445-1466.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 1998. Vibration control of a flexible rotor/magnetic bearing system subject to direct forcing and base motion disturbances. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212 (7), pp. 535-546.

Keogh, P. S. and Morton, P. G., 1994. The dynamic nature of rotor thermal bending due to unsteady lubricant shearing within a bearing. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 445 (1924), pp. 273-290.

Reports/Papers

Berg, F., Balchin, M. and Keogh, P., 2011. Challenges in time-variant exergy analysis of aircraft. Discussion Paper. Bath: University of Bath.

Conference or Workshop Items

Crosnier, E., Keogh, P. and Miles, A. W., 2014. A novel method to measure the micromotion of acetabular cup after total hip replacement. In: BORS 2014, 2014-06-23 - 2014-06-24, Bath.

Crosnier, E., Keogh, P. and Miles, A. W., 2014. Initial stability of acetabular cups under physiological conditions: comparing heel strike to the full gait cycle. In: 10th Bath Biomechanics Symposium, 2014-09-15 - 2014-09-15, Bath.

Crosnier, E., Scrivens, D., Keogh, P. and Miles, A. W., 2014. Six degrees of freedom assessment of micromotion of press-fit acetabular cups should be carried out under dynamic hip motion. In: ISTA 2014, 2014-09-24 - 2014-09-27, Kyoto.

Li, P., Sahinkaya, M. N. and Keogh, P. S., 2012. Active recovery of contact-free levitation in magnetic bearing systems. In: ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012, 2012-08-12 - 2012-08-12, Chicago, IL.

Berg, F., Balchin, M. and Keogh, P., 2011. Elucidation of aircraft energy use through time-variant exergy analysis. In: SAE 2011 AeroTech Congress & Exhibition, 2011-10-18 - 2011-10-21, Toulouse.

Griffiths, K., Hicks, B., Keogh, P., Shires, D. and Sheppard-Fidler, S., 2011. Simulating the transport environment for packaging testing using a multi degree of freedom method. In: International Safe Transit Association, 2011 International Transport Packaging Forum, 2011-04-18 - 2011-04-21, Orlando USA.

Griffiths, K., Hicks, B., Keogh, P., Shires, D. and Sheppard-Fidler, S., 2010. Using supermarket home delivery system to evaluate and improve vibration simulation within the packaging design process. In: 17th IAPRI World Conference on Packaging, International Association of Packaging Research Institutes, 2010-10-10, Tianjian.

Branson, D., Wang, F., Bowen, C. and Keogh, P., 2009. Dynamic simulation model of a hydraulic valve utilizing the hörbiger plate principle and piezoactuation to achieve high bandwidth and flow performance. In: 2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 2008-10-31 - 2008-11-06, Boston, MA.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. On the use of auxiliary bearing to escape trapped contact modes in rotor/magnetic bearings. In: 9th International Conference on Vibrations in Rotating Machinery, 2008-09-07 - 2008-09-11, University of Exeter, Exeter.

Abulrub, A. H. G., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2008. Performance Assessment of a Multi-Frequency Controller Applied to a Flexible Rotor Magnetic Bearing System - Contact Dynamics. In: Ulbrich, H. and Ginzinger, L., eds. 9th International Conference on Motion and Vibration Control, 2008-09-15 - 2008-09-18, Munich.

Abulrub, A. H., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. Performance assessment of a multi-frequency controller applied to a flexible rotor magnetic bearing system - contact dynamics. In: 9th International Conference on Motion and Vibration Control, 2008-09-15 - 2008-09-18, Munich.

Cade, I., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. On the design of an active auxiliary bearing for rotor/magnetic bearing systems. In: 11th International Symposium on Magnetic Bearings, 2008-08-26 - 2008-08-29, Nara.

Abulrub, A. H., Sahinkaya, M. N., Burrows, C. and Keogh, P., 2008. Robustness of recursive auto-tuning strategy in flexible rotor and magnetic bearing systems. In: 11th International Symposium on Magnetic Bearings, 2008-08-26 - 2008-08-29, Nara.

Ouyang, X., Tilley, D., Keogh, P., Yang, H., Johnston, D. N., Bowen, C. and Hopkins, P., 2008. Piezoelectric actuators for screw-in cartridge valves. In: 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2008-07-02 - 2008-07-05, Xi'an.

Cade, I. S., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2008. On the use of actively controlled auxiliary bearings in magnetic bearning systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin.

Keogh, P. S. and Khonsari, M. M., 2008. Incorporation of THD boundary conditions for the efficient evaluation of journal bearing performance. In: ASME/STLE International Joint Tribology Conference, IJTC 2007, 2008-01-01, San Diego, CA.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2008. Modeling for a High-Bandwidth High-Flow Valve Design Based on Horbiger Plate Operation. In: ASME Fluids Engineering Division Summer Conference, 2008-01-01, Jacksonville, FL.

Branson, D. T., Keogh, P. S. and Tilley, D. G., 2007. Improving the Position and Vibration Control of Multi-Body Structures Under External Disturbances. In: EVACS '07, 2007-10-01, Porto.

Cade, I. S., Keogh, P. S., Sahinkaya, M. N. and Burrows, C. R., 2007. Wavelet coefficient characteristics during rotor/auxiliary bearing contact in active magnetic bearing systems. In: ASME International Design Engineering Technical Conferences (IDETC), 2007-09-01, Las Vegas.

Schlotter, M. and Keogh, P. S., 2007. Recovery control for flexible rotors established in stable periodic contact modes. In: ASME Turbo Expo 2007, 2007-05-01.

Abulrub, A. G., Sahinkaya, M. N., Keogh, P. and Burrows, C., 2006. A constrained Lagrangian approach for modelling multiple contacts of flexible rotors. In: IFToMM 7th International Conference on Rotor Dynamics, 2006-09-01, Vienna.

Keogh, P. S., Sahinkaya, M. N., Burrows, C. R. and Sathujoda, P., 2006. Wavelet based adaption of H-infinity controllers in flexible rotor/magnetic bearing systems. In: IFToMM 7th International Conference on Rotor Dynamics, 2006-09-01, Vienna.

Abulrub, A. G., Sahinkaya, M. N., Keogh, P. S. and Burrows, C. R., 2006. Experiments on ROLAC to recover rotor position following contact. In: 10th International Symposium on Magnetic Bearings, 2006-08-01, Martigny.

Keogh, P. S., Cade, I. S. and Sahinkaya, M. N., 2006. The use of Wavelet analysis for the closed loop control of vibration in magnetic bearing systems. In: The tenth International Symposium on Magnetic Bearings (ISMB10), 2006-08-01, Martigny.

Cade, I. S., Keogh, P. S. and Sahinkaya, M. N., 2006. Transient rotor/active magnetic bearing control using sampled wavelet coefficients. In: ASME Turbo Expo 2006, 2006-05-01, Barcelona.

Abulrub, A. G., Sahinkaya, M. N., Burrows, C. R. and Keogh, P. S., 2006. Adaptive control of active magnetic bearings to prevent rotor-bearing contact. In: 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, 2006-11-05 - 2006-11-10, Chicargo.

Keogh, P. S. and Yong, W. Y., 2006. Thermal assessment of dynamic rotor/auxiliary bearing contact events. In: STLE/ASME International Joint Tribology Conference, IJTC 2006, 2006-01-01, San Antonio, TX.

Abulrub, A. G., Sahinkaya, M. N., Keogh, P. S. and Burrows, C. R., 2005. Effective model reduction for magnetically levitated flexible rotors including contact dynamics, Symposium on Modeling, Vibration, and Control of Rotor Systems. In: ASME 2005 International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, 2005-09-01, Long Beach, California.

Keogh, P. S., Seow, Y. H. and Cole, M. O. T., 2005. Characteristics of a magnetically levitated flexible rotor when in contact with one or more auxiliary bearings. In: ASME Turbo Expo 2005, 2005-06-01, Reno, Nevada.

Cole, M. O. T., Wongratanaphisan, T. and Keogh, P. S., 2005. On LMI-based optimization of vibration and stability in rotor system design. In: ASME Turbo Expo 2005, 2005-06-01, Reno, Nevada.

Branson, D. T., Keogh, P. S. and Tilley, D. G., 2005. Modelling the operation of actuated complex flexible structures through large movements. In: Eurodyn 2005, 2005-01-01, Paris.

Keogh, P. S., Cade, I. S. and Sahinkaya, M. N., 2004. Fault classification in rotor/magnetic bearing systems using discrete time wavelet coefficients. In: 9th International Symposium on Magnetic Bearings (ISMB9), 2004-08-01, Kentucky.

Sahinkaya, M. N., Abulrub, A. G. and Keogh, P. S., 2004. On the modelling of flexible rotor/magnetic bearing systems when in contact with retainer bearings. In: 9th International Symposium on Magnetic Bearings, 2004-08-01, Lexington, Kentucky.

Sahinkaya, M. N., Abulrub, A. G. and Keogh, P. S., 2004. Performance of synchronous controllers for rotor magnetic bearing systems under retainer bearing contact. In: 7th International Conference on Motion and Vibration Control (MOvIC' 04),, 2004-08-01, St.Louis.

Keogh, P. S. and Yong, W. Y., 2004. Rotor/auxiliary bearing contact issues in magnetic bearing systems. In: 9th International Symposium on Magnetic Bearings, 2004-08-01, Lexington, Kentucky.

Keogh, P. S. and Cole, M. O. T., 2004. Contact dynamic response with misalignment in a flexible rotor/magnetic bearing system. In: ASME Turbo Expo 2004, 2004-06-01, Vienna.

Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2002. Predictions on the dynamic behaviour of a rolling element auxiliary bearing for rotor/AMB systems. In: 8th International Symposium on Magnetic Bearings, 2002-08-01, Mito.

Cole, M. O. T. and Keogh, P. S., 2002. Robust control of multiple discrete frequency vibration components in rotor/magnetic bearing systems. In: 6th International Conference on Motion and Vibration Control, 2002-08-01, Saitama.

Keogh, P. S., Cole, M. O. T., Sahinkaya, M. N. and Burrows, C. R., 2002. On the control of synchronous vibration in rotor/magnetic bearing systems involving auxiliary bearing contact. In: ASME TURBO 2002, 2002-06-01, Amsterdam.

Langdon, I. J., Leonard, L., Tilley, D. G., Keogh, P. S., Cole, M. O. T., Cunningham, J. L., Miles, A. W. and Giddins, G. E. B., 2002. A simulator for evaluation of total wrist arthroplasties. In: British Orthopaedic Research Society, 2002-01-01, Cardiff.

Langdon, I. J., Leonard, L., Tilley, D. G., Keogh, P. S., Cole, M. O. T., Cunningham, J. L., Miles, A. W. and Giddins, G. E. B., 2002. Development of a wrist simulator. In: European Society of Biomechanics Meeting, 2002-01-01, Poland.

Cole, M. O. T., Keogh, P. S., Sahinkaya, M. N. and Burrows, C. R., 2002. Progress towards fault-tolerant active control of rotor-magnetic bearing systems. In: UKACC Conference Control 2002, 2002-01-01, Sheffield.

Sahinkaya, M. N., Cole, M. O. T., Keogh, P. S. and Burrows, C. R., 2001. Detection of feedback related faults in magnetic bearing/rotor systems using synchronous control techniques. In: International Symposium on Stability Control of Rotating Machinery (ISCORMA-1), 2001-08-01.

Eaton, M., Edge, K. A. and Keogh, P. S., 2001. Modelling and simulation of pressures within the meshing teeth of gear pumps. In: International Conference on Recent Advances in Aerospace Actuation Systems and Components, 2001-06-01, Toulouse.

This list was generated on Thu Dec 18 07:08:20 2014 GMT.