Research

Items by Meo, Michele

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 108.

Book Sections

Meo, M., 2014. Acoustic emission sensors for assessing and monitoring civil infrastructures. In: Wang, M. L., Lynch, J. P. and Sohn, H., eds. Sensor Technologies for Civil Infrastructures. Vol. 1. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 159-178. (Woodhead Publishing Series in Electronic and Optical Materials)

Meo, M., 2014. Nonlinear acoustic and ultrasound methods for assessing and monitoring civil infrastructures. In: Wang, M. L., Lynch, J. P. and Sohn, H., eds. Sensor Technologies for Civil Infrastructures. Vol. 1. Cambridge, U. K.: Woodhead Publishing Ltd., pp. 179-200. (Woodhead Publishing Series in Electronic and Optical Materials)

Iervolino, O., Jenks, C.H. and Meo, M., 2014. Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM. In: Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9063. .

Ciampa, F., Pickering, S., Scarselli, G. and Meo, M., 2014. Nonlinear damage detection in composite structures using bispectral analysis. In: Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9064. .

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2013. A comparison between optimized active thermography and digital shearography for detection of damage in aerospace composite structures. In: Buyukozturk, O., Tasdemir, M. A., Gunes, O. and Akkaya, Y., eds. Nondestructive Testing of Materials and Structures. Dordrecht: Springer, pp. 641-647. (RILEM Bookseries; 6)

Ciampa, F. and Meo, M., 2011. Acoustic emission localization in a composite stiffened panel using a time reversal algorithm. In: Composite Science and Technology. Vol. 471-472. Zurich-Durnten: Trans Tech Publications, pp. 910-915. (Key Engineering Materials)

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Polimeno, U., 2011. Impact damage detection in a stiffened composite wing panel using digital shearography and thermosonics. In: Composite Science and Technology. Vol. 471-472. Zurich-Durnten: Trans Tech Publications, pp. 904-909. (Key Engineering Materials)

Meo, M., 2011. Modelling Wave Propagation in Nonlinear Elastic Solids. In: Vanhille, C. and Campos-Pozuelo, C., eds. Computational Methods in Nonlinear Acoustics: Current Trends. Transworld Research Network.

Ciampa, F. and Meo, M., 2010. A new wavelet based algorithm for impact identificationand group velocity determination in composite structures. In: Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. , pp. 1057-1063.

Amerini, F. and Meo, M., 2010. Structural health monitoring of bolted joints using linear and nonlinear acoustic methods. In: Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. , pp. 590-600.

Dolce, F., Meo, M., Wright, A. and French, M., 2009. Structural response of laminated composite plates to blast load. In: ICCM-17 - 17th International Conference on Composite Materials. Piscataway, NJ: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Meo, M. and Polimeno, U., 2007. Development of a single mode nonlinear acoustic resonance method for the detection of delamination due to low velocity impact. In: Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Meo, M. and Mattei, C., 2006. An Overview of Failure Modes and Linear Elastic Wave Propagation Damage Detection Methods in Aircraft Structures. In: Delsanto, P., ed. Universality of Nonclassical Nonlinearity. New York: Springer, pp. 495-513.

Zumpano, G. and Meo, M., 2004. A new damage detection technique for rails based on wave propagation. In: Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Vol. 5391. SPIE, pp. 482-491. (Proceedings of the SPIE)

Meo, M., Zumpano, G., Meng, X., Roberts, G. and Dodson, A., 2004. Identification of Nottingham Wilford Bridge modal parameters using wavelet transforms. In: Smart Structures and Materials 2004: Modeling, Signal Processing, and Control. Vol. 5383. SPIE, pp. 561-570. (Proceedings of the SPIE)

Articles

Ciampa, F., Barbieri, E. and Meo, M., 2014. Modelling of multiscale nonlinear interaction of elastic waves with three-dimensional cracks. The Journal of the Acoustical Society of America, 135 (6), pp. 3209-3220.

Ciampa, F., Onder, E., Barbieri, E. and Meo, M., 2014. Forthcoming. Detection and modelling of nonlinear elastic response in damaged composite structures. Journal of Nondestructive Evaluation

Koutitas, G., Chiaraviglio, L., Ciullo, D., Meo, M. and Tassiulas, L., 2014. Energy-aware base stations : the effect of planning, management, and femto Layers. Journal of Electrical and Computer Engineering

Pinto, F., White, A. and Meo, M., 2013. Characterisation of ductile prepregs. Applied Composite Materials, 20 (2), pp. 195-211.

Visrolia, A. and Meo, M., 2013. Multiscale damage modelling of 3D weave composite by asymptotic homogenisation. Composite Structures, 95, pp. 105-113.

Meo, M., Marulo, F., Guida, M. and Russo, S., 2013. Shape memory alloy hybrid composites for improved impact properties for aeronautical applications. Composite Structures, 95, pp. 756-766.

Ciampa, F., Meo, M. and Barbieri, E., 2012. Impact localization in composite structures of arbitrary cross section. Structural Health Monitoring - An International Journal, 11 (6), pp. 643-655.

Pinto, F., Ciampa, F., Meo, M. and Polimeno, U., 2012. Multifunctional SMArt composite material for in situ NDT/SHM and de-icing. Smart Materials and Structures, 21 (10), 105010.

Barbieri, E., Petrinic, N., Meo, M. and Tagarielli, V. L., 2012. A new weight-function enrichment in meshless methods for multiple cracks in linear elasticity. International Journal for Numerical Methods in Engineering, 90 (2), pp. 177-195.

Amura, M. and Meo, M., 2012. Prediction of residual fatigue life using nonlinear ultrasound. Smart Materials and Structures, 21 (4), 045001.

Angioni, S. L., Visrolia, A. and Meo, M., 2012. Combining X-FEM and a multilevel mesh superposition method for the analysis of thick composite structures. Composites Part B-Engineering, 43 (2), pp. 559-568.

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2012. A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization. NDT & E International, 45 (1), pp. 91-96.

Ciampa, F. and Meo, M., 2012. Impact detection in anisotropic materials using a time reversal approach. Structural Health Monitoring - An International Journal, 11 (1), pp. 43-49.

Barbieri, E. and Meo, M., 2012. A fast object-oriented Matlab implementation of the Reproducing Kernel Particle Method. Computational Mechanics, 49 (5), pp. 581-602.

Guida, M., Marulo, F., Meo, M. and Russo, S., 2012. Experimental tests analysis of fiber metal laminate under birdstrike. Mechanics of Advanced Materials and Structures, 19 (5), pp. 376-395.

Ciampa, F. and Meo, M., 2012. Imaging non-classical elastic nonlinearities using reciprocal time reversal and phase symmetry analysis. Proceedings of SPIE - The International Society for Optical Engineering, 8348, 83480P.

Pinto, F., Ciampa, F., Polimeno, U. and Meo, M., 2012. In-situ damage detection in SMA reinforced CFRP. Proceedings of SPIE, 8345, 83452V.

Ciampa, F. and Meo, M., 2012. Nonlinear elastic imaging using reciprocal time reversal and third order symmetry analysis. Journal of the Acoustical Society of America, 131 (6), pp. 4316-4323.

Angioni, S. L., Meo, M. and Foreman, A., 2011. A critical review of homogenization methods for 2D woven composites. Journal of Reinforced Plastics and Composites, 30 (22), pp. 1895-1906.

Amerini, F. and Meo, M., 2011. Structural health monitoring of bolted joints using linear and nonlinear acoustic/ultrasound methods. Structural Health Monitoring - An International Journal, 10 (6), pp. 659-672.

Amura, M., Meo, M. and Amerini, F., 2011. Baseline-free estimation of residual fatigue life using a third order acoustic nonlinear parameter. Journal of the Acoustical Society of America, 130 (4), pp. 1829-1837.

Ciampa, F. and Meo, M., 2011. Acoustic emission localization in complex dissipative anisotropic structures using a one-channel reciprocal time reversal method. Journal of the Acoustical Society of America, 130 (1), pp. 168-175.

Tsartsaris, N., Meo, M., Dolce, F., Polimeno, U., Guida, M. and Marulo, F., 2011. Low-velocity impact behavior of fiber metal laminates. Journal of Composite Materials, 45 (7), pp. 803-814.

Angioni, S. L., Meo, M. and Foreman, A., 2011. A comparison of homogenization methods for 2-D woven composites. Composites Part B-Engineering, 42 (2), pp. 181-189.

Barbieri, E. and Meo, M., 2011. A meshless cohesive segments method for crack initiation and propagation in composites. Applied Composite Materials, 18 (1), pp. 45-63.

Guida, M., Marulo, F., Meo, M., Grimaldi, A. and Olivares, G., 2011. SPH - Lagrangian study of bird impact on leading edge wing. Composite Structures, 93 (3), pp. 1060-1071.

Pernice, M. F., Annicchiarico, D., Petriccione, A., De Tommaso, G., Meo, M., Antonucci, V. and Zarrelli, M., 2011. Structural polymer composite materials for muscle-skeletal diagnostic systems. Journal of Reinforced Plastics and Composites, 30 (4), pp. 287-300.

Angioni, S., Visrolia, A. and Meo, M., 2011. A hierarchical multiple plate models theory for laminated composites including delamination and geometrical nonlinear effects. Composite Structures, 93 (2), pp. 780-791.

Angioni, S., Meo, M. and Foreman, A., 2011. Impact damage resistance and damage suppression properties of shape memory alloys in hybrid composites: a review. Smart Materials and Structures, 20 (1), 013001.

Ciampa, F. and Meo, M., 2011. Acoustic emission source localization in anisotropic structures with diffuse field conditions using a time reversal approach. Proceedings of SPIE - The International Society for Optical Engineering, 7984, 798416.

Dolce, F., Meo, M., Wright, A., French, M. and Bernabei, M., 2011. Hybrid S2/Carbon epoxy composite armours under blast loads. Applied Composite Materials, 19 (3-4), pp. 349-362.

Barbieri, E. and Meo, M., 2010. Time reversal DORT method applied to nonlinear elastic wave scattering. Wave Motion, 47 (7), pp. 452-467.

Polimeno, U., Meo, M., Almond, D. and Angioni, S., 2010. Detecting low velocity impact damage in composite plate using nonlinear acoustic methods. Applied Composite Materials, 17 (5), pp. 481-488.

Barbieri, E. and Meo, M., 2010. Discriminating linear from nonlinear elastic damage using a nonlinear time reversal DORT method. International Journal of Solids and Structures, 47 (20), pp. 2639-2652.

Amerini, F., Barbieri, E., Meo, M. and Polimeno, U., 2010. Detecting loosening/tightening of clamped structures using nonlinear vibration techniques. Smart Materials and Structures, 19 (8), 085013.

Capezzuto, F., Ciampa, F., Carotenuto, G., Meo, M., Milella, E. and Nicolais, F., 2010. A smart multifunctional polymer nanocomposites layer for the estimation of low-velocity impact damage in composite structures. Composite Structures, 92 (8), pp. 1913-1919.

Dolce, F., Meo, M., Wright, A. and French, M., 2010. Structural response of laminated composite plates to blast load. Plastics, Rubber and Composites: Macromolecular Engineering, 39 (3-5), pp. 180-188.

Ciampa, F. and Meo, M., 2010. A new algorithm for acoustic emission localization and flexural group velocity determination in anisotropic structures. Composites Part A Applied Science and Manufacturing, 41 (12), pp. 1777-1786.

Ciampa, F. and Meo, M., 2010. Acoustic emission source localization and velocity determination of the fundamental mode A0 using wavelet analysis and a Newton-based optimization technique. Smart Materials and Structures, 19 (4), 045027.

Polimeno, U. and Meo, M., 2009. Detecting barely visible impact damage detection on aircraft composites structures. Composite Structures, 91 (4), pp. 398-402.

Guida, M., Marulo, F., Polito, T., Meo, M. and Riccio, M., 2009. Design and testing of a fiber-metal-laminate bird-strike-resistant leading edge. Journal of Aircraft, 46 (6), pp. 2121-2129.

Barbieri, E. and Meo, M., 2009. A meshfree penalty-based approach to delamination in composites. Composites Science and Technology, 69 (13), pp. 2169-2177.

Barbieri, E. and Meo, M., 2009. Evaluation of the integral terms in reproducing kernel methods. Computer Methods in Applied Mechanics and Engineering, 198 (33-36), pp. 2485-2507.

Rossi, M. and Meo, M., 2009. On the estimation of mechanical properties of single-walled carbon nanotubes by using a molecular-mechanics based FE approach. Composites Science and Technology, 69 (9), pp. 1394-1398.

Barbieri, E., Meo, M. and Polimeno, U., 2009. Nonlinear wave propagation in damaged hysteretic materials using a frequency domain-based PM space formulation. International Journal of Solids and Structures, 46 (1), pp. 165-180.

Guida, M., Meo, M., Riccio, M. and Marulo, F., 2008. Analysis of bird impact on a composite tailplane leading edge. Applied Composite Materials, 15 (4-6), pp. 241-257.

Polimeno, U., Meo, M. and Almond, D., 2008. Smart Nonlinear Acoustic Based Structural Health Monitoring System. Advances in Science and Technology, 56, pp. 426-434.

Meo, M. and Zumpano, G., 2008. Damage assessment on plate-like structures using a global-local optimization approach. Optimization and Engineering, 9 (2), pp. 161-177.

Meo, M., Polimeno, U. and Zumpano, G., 2008. Detecting damage in composite material using nonlinear elastic wave spectroscopy methods. Applied Composite Materials, 15 (3), pp. 115-126.

Zumpano, G. and Meo, M., 2008. Damage localization using transient non-linear elastic wave spectroscopy on composite structures. International Journal of Non-Linear Mechanics, 43 (3), pp. 217-230.

Meo, M., Tammaro, U. and Capuano, P., 2008. Influence of topography on ground deformation at Mt. Vesuvius (Italy) by finite element modelling. International Journal of Non-Linear Mechanics, 43 (3), pp. 178-186.

Polimeno, U. and Meo, M., 2008. Understanding the effect of boundary conditions on damage identification process when using non-linear elastic wave spectroscopy methods. International Journal of Non-Linear Mechanics, 43 (3), pp. 187-193.

Zumpano, G. and Meo, M., 2008. Damage detection in an aircraft foam sandwich panel using nonlinear elastic wave spectroscopy. Computers and Structures, 86 (3-5), pp. 483-490.

Meo, M. and Zumpano, G., 2007. A new nonlinear elastic time reversal acoustic method for the identification and localisation of stress corrosion cracking in welded plate-like structures - A simulation study. International Journal of Solids and Structures, 44, p. 3666.

Meo, M. and Rossi, M., 2007. A molecular-mechanics based finite element model for strength prediction of single wall carbon nanotubes. Materials Science & Engineering A - Structural Materials Properties Microstructure and Processing, 454, p. 170.

Meo, M., Zumpano, G. and Polimeno, U., 2007. Corrosion identification on an aluminium plate-like structure by monitoring the wave propagation phenomena. Corrosion Reviews, 25, pp. 213-232.

Meo, M. and Rossi, M., 2006. Tensile failure prediction of single wall carbon nanotube. Engineering Fracture Mechanics, 73 (17), pp. 2589-2599.

Meo, M. and Rossi, M., 2006. Prediction of Young's modulus of single wall carbon nanotubes by molecular-mechanics based finite element modelling. Composites Science and Technology, 66, pp. 1597-1605.

Meo, M., Zumpano, G., Meng, X., Cosser, E., Roberts, G. and Dodson, A., 2006. Measurements of dynamic properties of a medium span suspension bridge by using the wavelet transforms. Mechanical Systems and Signal Processing, 20, pp. 1112-1133.

Zumpano, G. and Meo, M., 2006. A new damage detection technique based on wave propagation for rails. International Journal of Solids and Structures, 43, pp. 1023-1046.

Meo, M. and Thieulot, E., 2005. Delamination modelling in a double cantilever beam. Composite Structures, 71, pp. 429-434.

Meo, M., Achard, F. and Grassi, M., 2005. Finite element modelling of bridging micro-mechanics in through-thickness reinforced composite laminates. Composite Structures, 71, pp. 383-387.

Meo, M., Antonucci, E., Duclaux, P. and Giordano, M., 2005. Finite element simulation of low velocity impact on shape memory alloy composite plates. Composite Structures, 71, pp. 337-342.

Meo, M., Zumpano, G., Piggott, M. and Marengo, G., 2005. Impact identification on a sandwich plate from wave propagation responses. Composite Structures, 71, pp. 302-306.

Meo, M. and Zumpano, G., 2005. Nonlinear elastic wave spectroscopy identification of impact damage on a sandwich plate. Composite Structures, 71, pp. 469-474.

Meo, M., Vignjevic, R. and Marengo, G., 2005. The response of honeycomb sandwich panels under low-velocity impact loading. International Journal of Mechanical Sciences, 47, pp. 1301-1325.

Meo, M. and Zumpano, G., 2005. On the optimal sensor placement techniques for a bridge structure. Engineering Structures, 27, pp. 1488-1497.

Lungarini, L., Troise, C., Meo, M. and De Natale, G., 2005. Finite element modelling of topographic effects on elastic ground deformation at Mt. Etna. Journal of Volcanology and Geothermal Research, 144, pp. 257-271.

Meo, M. and Zumpano, G., 2004. Optimal sensor placement on a large-scale civil structure. Proceedings of SPIE - The International Society for Optical Engineering, 5394 (108).

Meo, M., Morris, A., Vignjevic, R. and Marengo, G., 2003. Numerical simulations of low-velocity impact on an aircraft sandwich panel. Composite Structures, 62, pp. 353-360.

Meo, M. and Vignjevic, R., 2003. Finite element analysis of residual stress induced by shot peening process. Advances in Engineering Software, 34, pp. 569-575.

Grassi, M., Zhang, X. and Meo, M., 2002. Prediction of stiffness and stresses in z-fibre reinforced composite laminates. Composites Part A - Applied Science and Manufacturing, 33, pp. 1653-1664.

Vignjevic, R. and Meo, M., 2002. A new concept for a helicopter sub-floor structure crashworthy in impacts on water and rigid surfaces. International Journal of Crashworthiness, 7, pp. 321-330.

Vignjevic, R. and Meo, M., 2001. Simulation of helicopter under-floor structure impact on water. International Journal of Crashworthiness, 6, pp. 425-443.

Conference or Workshop Items

Dolce, F. and Meo, M., 2010. Structural response of laminated composite plates to blast load. In: 2010 Enginsoft International Conference, 2010-10-21 - 2010-10-22, Fiera Montichiari (BS).

Angioni, S., Visrolia, A. and Meo, M., 2010. A hierarchical multiscale plate model for the efficient simulation of composite laminates. In: 14th European Conference on Composite Materials, 2010-06-07 - 2010-06-10, Budapest.

Visrolia, A., Angioni, S. L. and Meo, M., 2010. A hierarchical XFEM plate model for the simulation of composite laminates failure. In: ECCM 2010: IV European Conference on Computational Mechanics, 2010-05-16 - 2010-05-21, Palais des Congrès, Paris.

Carotenuto, G., Meo, M. and Milella, E., 2009. A new smart multifunctional polymer nanocomposites layer for the detection of low velocity impact damage in composite structures. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31, Edinburgh.

Guida, M., Grimaldi, A., Marulo, M., Meo, M. and Olivares, G., 2009. Bird impact simulation on fiber metal laminate sandwich leading edge using a coupled FE/SPH approach. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31, Edinburgh.

Barbieri, E. and Meo, M., 2009. Computation of the integrals in reproducing kernel methods. In: 10th U.S. National Congress of Computational Mechanics, 2009-07-16 - 2009-07-19, Columbus, Ohio.

Barbieri, E. and Meo, M., 2009. Meshless cohesive segments method for crack initiation and propagation in composites. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31, Edinburgh.

Amerini, F., Barbieri, E., Meo, M. and Polimeno, U., 2009. Non Linear Vibration Method to Detect Imperfectly Contact Interfaces in Composite Beams. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31, Edinburgh.

Dolce, F., Meo, M., Wright, A. and French, M., 2009. Structural response of laminated composite plates to blast load. In: 17th International Conference on Composite Materials, 2009-07-27 - 2009-07-31, Edinburgh.

Ussorio, M., Perugini, P., Meo, M., Mataloni, A. and Milella, E., 2009. Damage tolerance modeling in design of space launcher motor cases. In: SAMPE 2009 (Society for the Advancement of Material and Process Engineering), 2009-05-18 - 2009-05-21, Baltimore, MD.

Polimeno, U., Meo, M., Almond, D. and Angioni, S., 2009. Detecting low velocity impact damage in composite plate using nonlinear acoustic methods. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22, Sharjah.

Dolce, F., Meo, M., Wright, A., French, M. and Bernabei, M., 2009. Glass/epoxy composite armours under blast loads. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22, Sharjah.

Tsartaris, N., Dolce, F., Polimeno, U., Meo, M., Guida, M., Marulo, F. and Riccio, M., 2009. Low velocity impact behavior of fiber metal laminates. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22, Sharjah.

Guida, M., Marulo, F., Meo, M. and Riccio, M., 2009. Transient three dimensional finite element analysis of a bird strike on a sandwich fin leading edge. In: 7th International Conference on Composite Science and Technology, 2009-01-20 - 2009-01-22, Sharjah.

Barbieri, E. and Meo, M., 2008. Delamination modelling using an element free galerkin approach. In: 13th European Conference on Composite Materials (ECCM13), 2008-06-02 - 2008-06-05, Stockholm.

Guida, M., Marulo, M., Meo, M. and Riccio, M., 2008. Evaluation and validation of multi-physics FE methods to simulate bird strike on a wing leading edge. In: 13th European Conference on Composite Materials (ECCM13), 2008-06-02 - 2008-06-05, Stockholm.

Polimeno, U., Meo, M. and Almond, D., 2008. Smart nonlinear acoustic based structural health monitoring system. In: 3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008, 2008-06-08 - 2008-06-13, Sicily.

Gonzalez, C. M., Fagan, M., Ansell, M. P. and Meo, M., 2007. Experimental and finite element studies of adhesively bonded lap joints for natural fibre composites. In: 6th International Conference on Composite Materials (ICCM-16), 2007-07-01, Kyoto.

Other

Meo, M., 2012. Nanoreinforced Solid Fibre Laminates (NSFL) for improved impact resistant properties. University of Bath.

This list was generated on Wed Jul 30 02:20:00 2014 IST.