Research

Items by Tilley, Derek

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 64.

Lin, J., Ngwompo, R. F. and Tilley, D. G., 2012. Development of a cardiopulmonary mathematical model incorporating a baro-chemoreceptor reflex control system. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 226 (10), pp. 787-803.

Darling, J., Patel, A. and Tilley, D., 2011. Prediction of the pressure-flow characteristic of a Belleville washer-based damper valve. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (8), pp. 1033-1043.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2011. Piezoelectrically actuated hydraulic valve design for high bandwidth and flow performance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (3), pp. 345-359.

Branson, D., Johnston, D. N., Tilley, D., Bowen, C. and Keogh, P., 2010. Piezoelectric Actuation in a High Bandwidth Valve. Ferroelectrics, 408 (1), pp. 32-40.

Roberts, A., Schlotter, M., Plummer, A. R. and Tilley, D. G., 2010. CFX/Simulink co-simulation of a wave energy converter. In: Bath/ASME Conference of Fluid Power and Motion Control (FPMC2010), 2010-09-15 - 2010-09-17.

Wilson, A. J., Murphy, C. M., Brook, B. S., Breen, D., Miles, A. W. and Tilley, D. G., 2009. A computer model of the artificially ventilated human respiratory system in adult intensive care. Medical Engineering & Physics, 31 (9), pp. 1118-1133.

Ouyang, X. P., Yang, H. H., Tilley, D. and Keogh, P., 2009. Research on screw in cartridge valves using piezoelectric actuator. Zhejiang Daxue Xuebao (Gongxue Ban), 43 (7), 1225-1229+1237.

Brook, B. S., Murphy, C. M., Breen, D., Miles, A. W., Tilley, D. G. and Wilson, A. J., 2009. Theoretical models for the quantification of lung injury using ventilation and perfusion distributions. Computational and Mathematical Methods in Medicine, 10 (2), pp. 139-154.

Darling, J., Tilley, D. and Gao, B., 2009. An experimental investigation of car-trailer high-speed stability. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 223 (4), pp. 471-484.

Ouyang, X., Tilley, D., Keogh, P., Yang, H., Johnston, D. N., Bowen, C. and Hopkins, P., 2008. Piezoelectric actuators for screw-in cartridge valves. In: 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2008-07-02 - 2008-07-05.

Branson, D. T., Keogh, P. S. and Tilley, D. G., 2008. Hydraulic actuation of multi-body structures through large-scale motions. Part 1: development and validation of system model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (2), pp. 181-193.

Branson, D. T., Keogh, P. S. and Tilley, D. G., 2008. Hydraulic actuation of multi-body structures through large-scale motions. Part 2: controller design and performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (3), pp. 365-375.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2008. Modeling for a High-Bandwidth High-Flow Valve Design Based on Horbiger Plate Operation. In: ASME Fluids Engineering Division Summer Conference, 2008-01-01.

Patel, A., Tilley, D. G. and Darling, J., 2007. Computational Simulation for Predicting Flow Through a Belleville Washer Damper Unit. In: ASME International Mechanical Engineering Congress and Exposition, 2007-11-01.

Gao, B., Darling, J., Tilley, D. G., Williams, R. A., Bean, A. and Donahue, J., 2007. Non-linear modelling of a gas strut used in ground vehicle suspensions. Transactions of the Institute of Measurement and Control, 29 (2), pp. 159-183.

Brook, B. S., Murphy, C. M., Breen, D., Miles, A. W., Tilley, D. G. and Wilson, A. J., 2007. Quantification of lung injury using ventilation and perfusion distributions obtained from gamma scintigraphy. Physiological Measurement, 28 (12), pp. 1451-1464.

Lin, J., Tilley, D. G. and Ngwompo, R. F., 2006. Development of a Cardiovascular Model with baroreceptor Reflex. In: 2006 European Simulation and Modelling Conference, 2006-10-01.

Gao, B., Darling, J., Tilley, D. G., Williams, R. A., Bean, A. and Donahue, J., 2006. Control of a hydropneumatic active suspension based on a non-linear quarter-car model. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 220 (I1), pp. 15-31.

Gao, B., Darling, J. and Tilley, D., 2006. Modelling and simulation of a semi-active suspension system. In: 18th Int. Conf. on Systems Engineering, ICSE '2006', 2006-01-01.

Boyd, L. J., Andrew, R. P., Collett, A. P. S., Johnston, D. N., Tilley, D. G. and Edge, K. A., 2006. Prediction of hydraulic inertance using acoustic measurements and CFD modelling. In: IMECE 2006, 2006-01-01.

Gao, B., Darling, J., Tilley, D. G., Williams, R. A., Bean, A. and Donahue, J., 2005. Non-linear modelling of a novel gas strut. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (D10), pp. 1153-1164.

Gao, B., Darling, J., Tilley, D. G., Williams, R. A., Bean, A. and Donahue, J., 2004. Modeling of a Novel Gas Strut Using Neural Networks. Proceedings of the ASME International Mechanical Engineering Congress, IMECE2004-59119.

Tilley, D. G., Keogh, P. S., Mutch, K., Robotham, M., Curran, P. and Mehrkar-Asl, S., 2003. Making the eye blink - modelling the operation of the Gateshead Millennium Bridge. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (7), pp. 735-758.

Alford, D. K., Tilley, D. G., Busby, J. S. and Edge, K. A., 2003. Development and inculcation of intrinsic safety principles for fluid power systems design. In: ASME International Design Engineering Technical Conference & Computers and Information in Engineering Conference, 2003-09-02 - 2003-09-06.

Wilson, A. J., Brook, B. S., Murphy, C. M., Breen, D., Miles, A. W. and Tilley, D. G., 2002. Multi-modal modelling of the human respiratory system in intensive care. In: IFMBE Proceedings, 2002-12-01.

Hawley, J. G., Kolackowski, S. T., Tilley, D. G., Hall, J., Cox, A. and Horrocks, R. W., 2002. Pm thermal regeneration - the potential for catalytic combustion. In: SAE 2002 World Congress & Exhibition, 2002-03-01.

Leonard, L., Sirkett, D. M., Langdon, I. J., Mullineux, G., Tilley, D. G., Keogh, P. S., Cunningham, J. L., Cole, M. O. T., Prest, P. H., Miles, A. W. and Giddins, G. E. B., 2002. Engineering a new wrist joint replacement prosthesis - A multidisciplinary approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (9), pp. 1297-1302.

Langdon, I. J., Leonard, L., Tilley, D. G., Keogh, P. S., Cole, M. O. T., Cunningham, J. L., Miles, A. W. and Giddins, G. E. B., 2002. A simulator for evaluation of total wrist arthroplasties. In: British Orthopaedic Research Society, 2002-01-01.

Langdon, I. J., Leonard, L., Tilley, D. G., Cunningham, J. L., Giddins, G. E. B. and Miles, A. W., 2002. A simulator to investigate load transfer between implant and bone for wrist arthroplasty. In: SICOT Trainees Meeting, 2002-01-01.

Langdon, I. J., Leonard, L., Tilley, D. G., Keogh, P. S., Cole, M. O. T., Cunningham, J. L., Miles, A. W. and Giddins, G. E. B., 2002. Development of a wrist simulator. In: European Society of Biomechanics Meeting, 2002-01-01.

Hughes, E. J., Richards, T. G. and Tilley, D. G., 2001. Development of a design support tool for fluid power system design. Journal of Engineering Design, 12 (2), pp. 75-92.

Chochia, G. A., Tilley, D. G. and Nguyen-Schaefer, H., 2001. Numerical and experimental investigations on a shock wave related cavitational flow. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 215 (I1), pp. 71-91.

Darling, J. and Tilley, D. G., 2000. The use of hydraulics in automotive applications. In: Drives and Controls Conference, 2000-01-01.

Murphy, C. M., Brook, B., Tilley, D. G., Miles, A. W., Breen, D. and Wilson, A. J., 2000. The validation of computer models of a mechanical ventilator and the human respiratory system intended for use in adult intensive care. In: IMACS Symposium on Mathematical Modelling, 2000-02-02 - 2000-02-04.

Campbell, N. A. F., Hawley, J. G., Tilley, D. G., Wong, L. and Horrocks, R. W., 1999. Nucleate Boiling Investigations Using Simulated Engine Cooling Passages. In: Vehicle Thermal Management Systems Conference, (SAE/IMechE), 1999-05-01.

Tilley, D. G. and Brain, C., 1999. Applying fluid power modelling techniques to other liquid and gas based systems. In: International Workshiop on Computer Software for Design, Analysis and Control of Fluid Power Systems, 1999-02-01.

Robinson, K., Hawley, J. G., Campbell, N. A. F. and Tilley, D. G., 1999. A Review of Precision Engine Cooling. In: SAE Congress, 2005-01-01.

Tilley, D. G., 1996. Fluid power system design using genetic algorithms. In: Genetic Algorithms in Design Optimisation, 1996-01-01.

Tilley, D. G., 1996. Funding fluid power research. In: Review of Current Technical Activities, BFPA, 1996-01-01.

Harris, R. M., Edge, K. A. and Tilley, D. G., 1996. Predicting the behavior of slipper pads in swashplate-type axial piston pumps. Journal of Dynamic Systems Measurement and Control - Transactions of the ASME, 118 (1), pp. 41-47.

Tilley, D. G., Chapple, P. J. and Fung, J., 1994. Simulaton techniques for component slection using a component data base. In: Drives and Controls 1994 Conference, 1994-03-01.

Harris, R. M., Edge, K. A. and Tilley, D. G., 1994. The suction dynamics of positive displacement axial piston pumps. Journal of Dynamic Systems Measurement and Control - Transactions of the ASME, 116 (2), pp. 281-287.

Darling, J. and Tilley, D. G., 1993. Progress towards a general purpose technique for the condition monitoring of fluid power systems. In: IMechE Aerospace Hydraulics and Systems Conference, 1993-09-01.

Tilley, D. G. and Tomlinson, S. P., 1993. Simulaton of the bi-stable valve in the A340 landing gear. In: IMechE Aerospace Hydraulics and Systems Conference, 1993-09-01.

Tilley, D. G., Chapple, P. J. and Maeda, T., 1993. Using computer simulation methods in fluid power education. In: Maeda, T., ed. 2nd JHPS International Symposium on Fluid Power, 1993-09-01.

Harris, R. M., Edge, K. A. and Tilley, D. G., 1993. The spin motion of pistons in a swashplate-type axial piston pump. In: 3rd Scandinavian International Conference Fluid Power, 1993-05-01, Linkoping.

Tilley, D. G., 1993. Why use simulaton? In: Simulation of Fluid Power Systems, 1993-01-01.

Burrows, C. R., Tilley, D. G., Edge, K. A. and Chapple, P. J., 1993. Approach to the design of fluid power systems. In: ASME WAM, 1993-01-01, New Orleans, LA.

Vaughan, N. D., Tilley, D. G. and Pomeroy, P. E., 1993. Erosive wear measurement in spool valves. In: Annual Earthmoving Industry Conference, 1993-04-20 - 1993-04-21, Peoria, IL.

Tilley, D. G., 1992. Hydraulic simulation. In: Fluid Power in Agricultural Machinery, 1992-11-01.

Harris, R. M., Edge, K. A. and Tilley, D. G., 1992. The suction dynamics of positive displacement axial piston pumps. In: ASME WAM, 1993-01-01, New Orleans, LA.

Tilley, D. G., Richards, C. W., Tomlinson, S. P. and Burrows, C. R., 1991. Role of simulation in the design of fluid power systems. In: IFAC Symposium on Computer Aided Design in Control Systems, 1991-07-01.

Tilley, D. G., 1991. The operation and application of the Coulter LCM11 condition monitor. In: Royal Society of Chemistry Particle Characterisation Group, 1991-01-01.

Tilley, D. G. and Tomlinson, S. P., 1989. Practical experiences in simulating industrial fluid power systems. In: 2nd International Fluid Power Workshop, 1989-09-01.

Tilley, D. G., Livesey, J., Tomlinson, S. P. and Himmens, I. A., 1989. An approach to the modelling of underwater breathing apparatus. In: Undersea and Hyperbaric Medical Society Workshop 'Physiological and Human Engineereing Aspects of Underwater breathing apparatus', 1989-04-01.

Burrows, C. R., Edge, K. A., Tilley, D. G. and Tomlinson, S. P., 1989. Fault diagnosis of fluid power systems using computer simulation - a first step towards an expert system. In: 2nd International Conf on Fluid Power Transmission and Control, 1989-03-01, Hangzhou, P.R.China..

This list was generated on Tue Jun 28 08:15:10 2016 IST.