Research

Items by Hillis, Andrew

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 38.

Book Sections

Pan, M., Robertson, J., Johnston, D. N., Plummer, A. R. and Hillis, A. J., 2014. Forthcoming. Experimental investigation of a switched inertance hydraulic system. In: Bath/ASME Symposium on Fluid Power and Motion Control. ASME.

Scheiblegger, C. A., Roy, N. B., Silva Parez, O. B., Hillis, A. J. and Darling, J. C., 2014. Non-linear modeling of bushings and cab mounts for calculation of durability loads. In: SAE Technical Papers. Vol. 1. .

Pan, M., Johnston, D. N., Plummer, A., Kudzma, S. and Hillis, A., 2013. Active control of pressure pulsation in a piping system using measured dynamic flow rate. In: Proceedings of the ASME/BATH Symposium on Fluid Power and Motion Control, 2013. New York, U. S. A.: ASME, V001T01A001-1 - V001T01A059-7 :.

Articles

Darling, J., Hillis, A. J. and Gan, Z., 2015. Forthcoming. Development of a Biodynamic Model of a Seated Human Body Exposed to Low Frequency Whole-body Vibration. Journal of Vibration Engineering and Technologies, 3 (3).

Chen, L. F., Zang, J., Hillis, A. J., Morgan, G. C. J. and Plummer, A. R., 2014. Numerical investigation of wave-structure interaction using OpenFOAM. Ocean Engineering, 88, pp. 91-109.

Cargo, C. J., Hillis, A. J. and Plummer, A. R., 2014. Optimisation and control of a hydraulic power take-off unit for a wave energy converter in irregular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 228 (4), pp. 462-479.

Pan, M., Johnston, D. N., Plummer, A. R., Kudzma, S. and Hillis, A. J., 2014. Theoretical and experimental studies of a switched inertance hydraulic system including switching transition dynamics, non-linearity and leakage. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 228 (1), pp. 12-25.

Stringer, R., Zang, J. and Hillis, A. J., 2014. Unsteady RANS computations of flow around a circular cylinder for a wide range of Reynolds numbers. Ocean Engineering, 87, pp. 1-9.

Pan, M., Johnston, N. and Hillis, A., 2013. Active control of pressure pulsation in a switched inertance hydraulic system. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (7), pp. 610-620.

Cargo, C. J., Plummer, A. R., Hillis, A. J. and Schlotter, M., 2012. Determination of optimal parameters for a hydraulic power take-off unit of a wave energy converter in regular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226 (1), pp. 98-111.

Hillis, A. J., 2011. Multi-input multi-output control of an automotive active engine mounting system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (11), pp. 1492-1504.

Hillis, A. J. and Courtney, C. R. P., 2011. Structural health monitoring of fixed offshore structures using the bicoherence function of ambient vibration measurements. Journal of Sound and Vibration, 330 (6), pp. 1141-1152.

Rahim, S. A. and Hillis, A. J., 2011. Frequency shift in tracking the damage of fixed offshore structures. Journal of Applied Sciences, 11 (10), pp. 1688-1697.

Hillis, A. J. and Courtney, C. R. P., 2010. Bicoherence-based structural health monitoring of fixed offshore structures. Proceedings of SPIE - The International Society for Optical Engineering, 7650, 76502C.

Hillis, A., 2010. Active motion control of fixed offshore platforms using an extended state observer. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (1), pp. 53-63.

Hillis, A. J., Neild, S. A., Drinkwater, B. W. and Wilcox, P. D., 2006. Global crack detection using bispectral analysis. Proceedings of the Royal Society A, 462 (2069).

Hillis, A. J., Neild, S. A., Stoten, D. P. and Harrison, A. J. L., 2005. A minimal controller synthesis algorithm for narrow-band applications. Proceedings of the International Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 219.

Hillis, A. J., Harrison, A. J. L. and Stoten, D. P., 2004. A comparison of two adaptive algorithms for the control of active engine mounts. Journal of Sound and Vibration, 286.

Conference or Workshop Items

Chen, L., Sun, L., Zang, J. and Hillis, A. J., 2014. Numerical Simulation of Wave-induced Roll of a 2-D Rectangular Barge Using OpenFOAM. In: the 29th International Workshop on Water Waves and Floating Bodies, 2014-03-30 - 2014-04-02, Osaka.

Chen, L., Zang, J., Hillis, A. J. and Plummer, A. R., 2013. Modelling of focused waves transformation and wave run-up at a beach using OpenFOAM. In: The 9th UK Young Coastal Scientists and Engineers Conference, 2013-03-25 - 2013-03-26, Aberdeen.

Chen, L., Morgan, G. C. J., Zang, J., Hillis, A. J. and Taylor, P. H., 2013. Modelling wave interactions with a surface-piercing vertical cylinder using OpenFOAM. In: The 28th International Workshop on Water Waves and Floating Bodies, 2013-04-07 - 2013-04-10.

Stringer, R., Zang, J. and Hillis, A. J., 2013. Numerical modelling of a laboratory scale tidal turbine. In: 2nd Oxford Tidal Energy Workshop (OTE 2013), 2013-03-18 - 2013-03-19, Oxford.

Stringer, R., Zang, J. and Hillis, A. J., 2013. Prediction of Lab Scale Cross-Flow Tidal Turbine Performance Using Unsteady RANS. In: The 10th European Wave and Tidal Energy Conference, 2013-09-02 - 2013-09-05, Aalborg.

Chen, L., Zang, J., Hillis, A. J. and Plummer, A. R., 2013. Use of OpenFORM in modelling of wave-structure interactions. In: HPC symposium, 2013-06-04 - 2013-06-04, Bath.

Johnston, N., Kudzma, S., Plummer, A., Sell, N., Hillis, A. and Pan, M., 2012. A high flow fast switching valve for digital hydraulic systems. In: The Fifth Workshop on Digital Fluid Power, 2012-10-24 - 2012-10-25, Tampere.

Pan, M., Johnston, N. and Hillis, A., 2012. Active control of pressure pulsation in a switched inertance hydraulic system using a rectangular-wave reference signal. In: Bath/ASME Symposium on Fluid Power and Motion Control, 2012-09-12 - 2012-09-14, Bath.

Wang, P., Kudzma, S., Johnston, N., Plummer, A. and Hillis, A., 2011. The Influence of Wave Effects on Digital Switching Valve Performance. In: The Fourth Workshop on Digital Fluid Power, 2011-09-21 - 2011-09-22, Linz.

Cargo, C., Plummer, A. R., Hillis, A. J. and Schlotter, M., 2011. Optimal design of a realistic hydraulic power take-off in irregular waves. In: 9th European Wave and Tidal Energy Conference (EWTEC), 2014-09-01 - 2014-09-05, Southampton.

Lamming, C., Plummer, A. R. and Hillis, A. J., 2011. Controller Synthesis in Electrohydraulic Force Control. In: 12th Scandinavian conference on Fluid Power (SICFP'11), 2011-05-17 - 2011-05-20, Tampere.

Cargo, C., Plummer, A. R. and Hillis, A. J., 2011. Hydraulic Power Transmission and Control for Wave Energy Converters. In: 52nd National Fluid Power Conference, 2011-03-21 - 2011-03-25, Las Vegas.

Lamming, C., Plummer, A. R. and Hillis, A. J., 2010. Analysis of Robust Electrohydraulic Force Control. In: 7th International Fluid Power Conference (IFK), 2010-03-22 - 2010-03-24, Aachen.

Hillis, A., 2009. Adaptive vibration control of offshore structures. In: International Conference on Experimental Vibration Analysis for Civil Engineering Structures (EVACES), 2009-10-14 - 2009-10-16, Wroclaw.

Hillis, A. J., Neild, S. A., Drinkwater, B. W. and Wilcox, P. D., 2006. Bispectral analysis of ultrasonic inter-modulation data for improved defect detection. In: 32nd Annual Review of Process in Quantitative Nondestructive Evaluation, 2005-07-31 - 2005-08-05, Brunswick.

Hillis, A. J. and Harrison, A. J. L., 2004. Active engine mounts for improved passenger comfort. In: Proceedings of the FISITA World Automotive Congress, Barcelona Spain, 2004-01-01.

Hillis, A. J., Harrison, A. J. L. and Stoten, D. P., 2003. Adaptive control of active engine mounts. In: Proceedings of the fifth IASTED International Conference on Signal and Image Processing, Honolulu USA, 2003-01-01.

Patent

Chapman, A., Hillis, A. J., Biddle, H. and Carey, J., 2007. Systems and method for dispensing an ice slush-cooled beverage. GB2436445(B), US2009077999(A1), WO2007107698(A1), EP1996883(A1), September 2007.

Other

Mullineux, G. and Hillis, A., 2012. Cost reduction and product innovation for bulk handling machines. University of Bath.

Hillis, A. and Mullineux, G., 2012. Cost reduction and product innovation with Stock Redler. University of Bath.

This list was generated on Mon Oct 20 23:56:13 2014 IST.