Items by Bramley, Alan

2011

Huang, G. Q., Qu, T., Fang, M. J. and Bramley, A. N., 2011. RFID-enabled gateway product service system for collaborative manufacturing alliances. CIRP Annals - Manufacturing Technology, 60 (1), pp. 465-468.

2008

Aksakal, B., Osman, F. H. and Bramley, A. N., 2008. Determination of experimental axial and sideways metal flow in open die forging. Materials & Design, 29 (3), pp. 576-583.

2007

Jeon, J. and Bramley, A., 2007. A Friction model for microforming. International Journal of Advanced Manufacturing Technology, 33 (1-2), pp. 125-129.

2006

Pennock, S. R., Shepherd, P. R., Trewartha, G. and Bramley, A. N., 2006. UWB Tracking for Sports and Entertainment. In: 1st European Conference on Antennas and Propagation (EuCAP 2006), 2006-11-06 - 2006-11-10, Nice.

Bramley, A. N., Pennock, S. R., Kerwin, D., Shepherd, P. R. and Trewartha, G., 2006. A System for Radio Tracking of Team-Sports Players. In: 6th International Conference on the Engineering of Sport, 2006-07-11 - 2006-07-14, Munich.

Allwood, J. M., Bramley, A. N., Ridgman, T. W. and Mileham, A. R., 2006. A novel method for the rapid production of inexpensive dies and moulds with surfaces made by incremental sheet forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (2), pp. 323-327.

Bramley, A. N., McMahon, C., Brissaud, D. and Coutellier, D., 2006. Guest editorial: Special issue on integrated design and manufacture in mechanical engineering. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (4), p. 531.

2005

Bramley, A. N., Jeswiet, J., Micari, F., Duflou, J. and Allwood, J., 2005. Asymmetric single point incremental forming of sheet metal. CIRP Annals - Manufacturing Technology, 54 (2), pp. 623-649.

Masuku, E. S., Bramley, A. N., Mileham, A. R. and Owen, G. W., 2005. Incremental sheet metal forming: A die-less rapid prototyping process forsheetmetal. In: Bramley, A. N., Brissaud, D., Coutellier, D. and McMahon, C., eds. Advances in Integrated Design and Manufacturing in Mechanical Engineering. Dordrecht, The Netherlands: Springer, pp. 305-314.

Qin, Q., Masuku, E. S., Bramley, A. N., Mileham, A. R. and Owen, G. W., 2005. Incremental sheet-metal forming simulation and accuracy. In: Proc ICTP 2005, 2005-01-01, Verona.

Jeon, A. H. J., Low, J., Mileham, A. R., Bramley, A. N. and Johal, C., 2005. Simulating electroplated micro surfaces in 3-D process. In: Proceedings of the 1st International Conference on Multi-Material Micro Manufacture (4M2005), 2005-01-01, Karlsruhe.

2004

Kencl, L., Pias, M., Pennock, S. R., Bramley, A. N., Kerwin, D., Shepherd, P. R. and Trewartha, G., 2004. A System for Radio Tracking of Team Sports Players. In: 6th Conference on Ubiquitous Computing (UBICOMP 2004), 2004-09-07 - 2004-09-10, Nottingham.

Bramley, A. N., Mathieu, L., Moisan, A., Reinhart, G., Weill, R. D., Weinert, K. and Westkamper, E., 2004. Dictionary of production engineering III manufacturing systems. Berlin, Heidelberg, Germany: Springer-Verlag.

Bramley, A. N., Culley, S. J., Dekoninck, E. A., McMahon, C. A., Medland, A. J., Mileham, A. R., Newnes, L. B. and Owen, G. W., 2004. Proceedings of the IDMME 2004 Conference. Bath: University of Bath. (Proc IDMME (Abstracts and CD))

Mileham, A. R., Culley, S. J., Owen, G. W., Newnes, L. B., Giess, M. D. and Bramley, A. N., 2004. The impact of run-up in ensuring rapid changeover. CIRP Annals - Manufacturing Technology, 53 (1), pp. 407-410.

2003

Becker, R., Jeon, H. J., Chang, C. C. and Bramley, A. N., 2003. A geometric approach to modelling friction in metal forming. CIRP Annals - Manufacturing Technology, 52 (1), pp. 209-212.

2002

Bramley, A. N. and Culley, S. J., 2002. Self Learning and group projects in Enginering. In: CIRP International Manufacturing Education Conference, 2002-04-03, Enschede, The Netherlands.

Chang, C. C. and Bramley, A. N., 2002. Determination of the heat transfer coefficient at the workpiece-die interface for the forging process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (8), pp. 1179-1186.

2001

Bonnavand, F., Bramley, A. N. and Mynors, D. J., 2001. A fast new numerical tool for designing prestressed dies for backward extrusion Part 1: die behaviour. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2), pp. 169-179.

Bonnavand, F., Bramley, A. N. and Mynors, D. J., 2001. A fast new numerical tool for designing prestressed dies for backward extrusion Part 2: numerical analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2), pp. 181-193.

Bramley, A. N., Pham, D. T., Dimov, S. S. and Hagan, V. O., 2001. Forming processes and simulation. In: 17th National Conference on Manufacturing Research, 2001-09-04 - 2001-09-06, Cardiff.

Bramley, A. N., Vollersten, F. and Kleiner, M., 2001. Incremental sheet forming process for small batch and prototype parts. In: EPRINTS-BOOK-TITLE. Germany: Verlag Meisenbach Bamberg, pp. 95-102.

Bramley, A. N., 2001. UBET and TEUBA: fast methods for forging simulation and preform design. Journal of Materials Processing Technology, 116, pp. 62-66.

2000

Bramley, A. N. and Mynors, D. J., 2000. The use of forging simulation tools. Materials & Design, 21 (4), pp. 279-286.

Bramley, A. N., Venknatesh, V. C., Yusof, N. M., Sharif, S., Yusof, S. M. and Salehun, M. A. K., 2000. UBET and TEUBA fast methods for forging simulation and preform design. In: Proceedings of the Second International Conference on Advanced Manufacturing Technology, 2000-01-01, Johor Bahru.

1999

Bramley, A. N., Mileham, A. R., Newnes, L. B. and Owen, G. W., eds., 1999. Advances in manufacturing technology XIII. London: Wiley-Blackwell.

Bramley, A. N., 1999. From Kudo to TEUBA. In: Geiger, M., ed. Umformtechnik 2000Plus. Bamberg, Germany: Meisenbach-Verlag, pp. 81-99.

Bramley, A. N., Mynors, D. J. and Geiger, M., 1999. The use of forging simulation tools. In: Advanced Technology of Plasticity, Proceedings of the 6th ICTP, 1999-09-19 - 1999-09-24, Berlin.

1998

Snape, R. G., Clift, S. E. and Bramley, A. N., 1998. Sensitivity of finite element analysis of forging to input parameters. Journal of Materials Processing Technology, 82 (1-3), pp. 21-26.

1997

Bramley, A. N., Dean, T. A. and Standring, P. M., 1997. A view of the future of forging. Journal of the Institute of Forging Technology, 5, pp. 38-41.

Bramley, A. N., 1997. Implications of IT for forging technology. Journal of the Institute of Forging Technology, 5 (3), p. 38.

1996

Bramley, A. N., 1996. Simulation in manufacturing. Journal of Engineering Manufacture, 210, p. 291.

Bramley, A. N., Bowyer, A., Clift, S. E., Mynors, D. J., Pitt-Francis, J. M., Snape, R. G. and Standring, P., 1996. Versatile forging modelling. In: Metals Engineering '96, 1996-01-01, NEC.

1995

Bramley, A. N., 1995. Forging modelling. In: 9th International Cold Forging Congress, 1995-05-01, Solihull.

1994

Bramley, A. N., 1994. Design of preform stages with UBET. In: Rechnergestutzte Methoden fur die Werkzeugauslegung beim Prazisionschmieden und der Blechumung, 1994-10-01, Hannover.

1993

Bramley, A. N., 1993. Quality management in engineering education - too many cooks spoil the broth. European Journal of Engineering Education, 18 (4), pp. 333-338.

1992

Bramley, A. N. and Osman, F. H., 1992. The upper bound method. In: Hartley, P., Pillinger, I. and Sturgess, C. E., eds. Numerical Modelling of Material Deformation Processes : Research, Development and Applications. Springer-Verlag, pp. 114-130.

1991

Bramley, A. N., 1991. A long hard road to go. Manufacturing Engineer, 61, p. 60.

Bramley, A. N., 1991. Hand in hand. Manufacturing Engineer, 70, p. 32.

1990

Bramley, A. N., Lugora, C. F. and Osman, F. H., 1990. Forging process modeller; a feasibility study. Annals of the CIRP, 39 (1), pp. 227-230.

1989

Bramley, A. N. and Vaughan, N. D., 1989. Breaking the language barrier. Manufacturing Engineer, 7 (68), pp. 32-34.

Bramley, A. N., Lord, J. D. and Beeley, P. R., 1989. Determination of wear resistance of hot work die materials. Annals of the CIRP, 38 (1), pp. 231-234.