Research

Items by Wilson, Michael

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Jump to: 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1986
Number of items: 79.

2014

Teuber, R., 2014. Computation of Rim-sealed Ingestion for Gas Turbines. Thesis (Doctor of Philosophy (PhD)). University of Bath.

Scobie, J. A., Sangan, C. M., Owen, J. M., Wilson, M. and Lock, G. D., 2014. Experimental measurements of hot gas ingestion through turbine rim seals at off-design conditions. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 228 (5), pp. 491-507.

Wang, L. and Wilson, M. A., 2014. Effects Of Ingestion On The Flow And Heat Transferin A Rotor-Stator System. In: Proceedings of the 15th International Heat Transfer Conference, IHTC-15. .

Scobie, J., Sangan, C., Teuber, R., Pountney, O., Owen, M., Wilson, M. and Lock, G., 2014. Experimental measurements of ingestion through turbine rim seals. Part 4: Off-design conditions (ASME GT2013-94147). In: Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Vol. 3A. San Antonio, U.S.A.: ASME, V03AT15A002.

Lalwani, Y., Sangan, C. M., Wilson, M. A. and Lock, G. D., 2014. Forthcoming. Steady computations of ingress through gas turbine rim seals. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy

2013

Zhou, K., Wilson, M., Owen, J. M. and Lock, G. D., 2013. Computation of ingestion through gas turbine rim seals. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 227 (7), pp. 1101-1113.

Sangan, C. M., Pountney, O. J., Scobie, J. A., Wilson, M., Owen, J. M. and Lock, G. D., 2013. Experimental measurements of ingestion through turbine rim seals, Part 3 : single and double seals. Journal of Turbomachinery: Transactions of the ASME, 135 (5), 051011.

Sangan, C. M., Pountney, O., Zhou, K., Owen, J. M., Wilson, M. and Lock, G., 2013. Experimental measurements of ingestion through turbine rim seals, Part 2 : rotationally-induced ingress. Journal of Turbomachinery: Transactions of the ASME, 135 (2), 021013.

Sangan, C. M., Pountney, O., Zhou, K., Wilson, M., Owen, J. M. and Lock, G., 2013. Experimental measurements of ingestion through turbine rim seals. Part 1 : externally induced ingress. Journal of Turbomachinery: Transactions of the ASME, 135 (2), 021012.

Teuber, R., Li, Y. S., Maltson, J., Wilson, M., Lock, G. D. and Owen, J. M., 2013. Computational extrapolation of turbine sealing effectiveness from test rig to engine conditions. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227 (2), pp. 167-178.

2012

Owen, J. M., Zhou, K., Pountney, O., Wilson, M. and Lock, G., 2012. Prediction of ingress through turbine rim seals-part I : Externally induced ingress. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031012.

Javiya, U., Chew, J. W., Hills, N. J., Zhou, L., Wilson, M. and Lock, G. D., 2012. CFD analysis of flow and heat transfer in a direct transfer preswirl system. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031017.

Karnahl, J., Von Wolfersdorf, J., Tham, K. M., Wilson, M. and Lock, G., 2012. Computational fluid dynamics simulations of flow and heat transfer in a preswirl system: influence of rotating-stationary domain interface. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 134 (5), 052502.

Wang, L. and Wilson, M., 2012. Computations of flow and heat transfer in a rotor-stator system with externally-induced ingestion. International Journal of Gas Turbine, Propulsion and Power Systems, 4 (1), pp. 10-18.

Teuber, R., Li, Y.S., Maltson, J., Wilson, M., Lock, G. and Owen, J.M., 2012. Computational extrapolation of turbine sealing effectiveness from test rig to engine conditions. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15, Copenhagen.

Sangan, C., Pountney, O., Scobie, J., Wilson, M., Owen, M. and Lock, G., 2012. Experimental measurements of ingestion through turbine rim seals. Part 3: Single and double seals (ASME GT2012-68493). In: Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Vol. 4. Copenhagen, Denmark: ASME, pp. 1983-1995.

2011

Karnahl, J., von Wolfersdorf, J., Tham, K. M., Wilson, M. and Lock, G., 2011. CFD simulations of flow and heat transfer in a pre-swirl system: influence of rotating-stationary domain interface. In: Proceedings of the ASME Turbo Expo 2011. ASME.

Sangan, C. M., Zhou, K., Owen, J. M., Pountney, O. J., Wilson, M. and Lock, G. D., 2011. Experimental measurements of ingestion through turbine rim seals. Part 1: Externally-induced ingress (ASME GT2011-45310). In: Proceedings of the ASME Turbo Expo 2011: Turbine Technical Conference and Exposition. Vol. 5. Vancouver, Canada: ASME, pp. 741-753.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2011. Effect of radial location of nozzles on heat transfer in preswirl cooling systems. Journal of Turbomachinery: Transactions of the ASME, 133 (2), 021023.

Zhou, K., Wilson, M., Owen, J. M. and Lock, G., 2011. Computation of ingestion through gas turbine rim seals. In: Proceedings of the ASME Turbo Expo. Vol. 5. ASME, pp. 767-777.

Sangan, C.M., Pountney, O.J., Zhou, K., Wilson, M., Owen, J.M. and Lock, G.D., 2011. Experimental measurements of ingestion through turbine rim seals. Part 2 : rotationally-induced ingress (ASME GT2011-45313). In: Proceedings of the ASME Turbo Expo, 2011. Vol. 5. Vancouver, Canada: ASME, pp. 755-765.

2010

Javiya, U., Chew, J., Hills, N., Zhou, L., Wilson, M. and Lock, G., 2010. CFD analysis of flow and heat transfer in a direct transfer pre-swirl system. In: ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. Vol. 4. New York: American Society of Mechanical Engineers, pp. 1167-1178. (Proceedings of the ASME Turbo Expo)

2009

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Accurate heat transfer measurements using thermochromic liquid crystal, Part 2 : application to a rotating disc. International Journal of Heat and Fluid Flow, 30 (5), pp. 950-959.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Accurate heat transfer measurements using thermochromic liquid crystal. Part 1: calibration and characteristics of crystals. International Journal of Heat and Fluid Flow, 30 (5), pp. 939-949.

Kakade, V., Lock, G., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Effect of Location of Nozzles on Heat Transfer in pre-Swirl Cooling Systems. In: 54th International Gas Turbine and Aerospace Congress, 2009-06-01, Orlando.

Lewis, P., Wilson, M., Lock, G. D. and Owen, J. M., 2009. Effect of radial location of nozzles on performance of preswirl systems : a computational and theoretical study. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (2), pp. 179-190.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Effect of radial location of nozzles on heat transfer in pre-swirl cooling systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 3. ASME, pp. 1051-1060.

2008

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2008. Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin.

2007

Lewis, P. R. and Wilson, M., 2007. Three-dimensional computations of ingress in gas turbine cooling systems. In: International Gas Turbine Congress, 2007-12-01, Tokyo.

Robinson, K., Wilson, M., Leathard, M. J. and Hawley, J. G., 2007. Computational modelling of convective heat transfer in a simulated engine cooling gallery. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221 (9), pp. 1147-1157.

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2007. Physical interpretation of flow and heat transfer in preswirl systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 129 (3), pp. 769-777.

King, M. P., Wilson, M. and Owen, J. M., 2007. Rayleigh-Benard convection in open and closed rotating cavities. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 129 (2), pp. 305-311.

2006

Zhang, D., Varah, S., Lock, G. D. and Wilson, M., 2006. Thermal Modelling of Heat Transfer in a Rotating Disc Due to Superposed Flow of Cooling Air. In: 13th International Heat Transfer Conference, 2006-08-01, Sydney.

Lewis, P. R., Wilson, M., Lock, G. D. and Owen, J. M., 2006. Physical Interpretation of Flow and Heat Transfer in Pre-swirl Systems. In: ASME 51st International Gas Turbine and Aerospace Congress, 2006-05-01, Barcelona.

2005

Farzaneh Gord, M., Wilson, M. and Owen, J. M., 2005. Numerical and theoretical study of flow and heat transfer in a pre-swirl rotor-stator system. In: ASME Turbo Expo, 2009-06-08 - 2009-06-12, Orlando, FL.

Lock, G. D., Yan, Y. Y., Newton, P. J., Wilson, M. and Owen, J. M., 2005. Heat transfer measurements using liquid crystals in a preswirl rotating-disk system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 127 (2), pp. 375-382.

Lock, G. D., Wilson, M. and Owen, J. M., 2005. Influence of fluid dynamics on heat transfer in a preswirl rotating-disk system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 127 (4), pp. 791-797.

King, M. P. and Wilson, M., 2005. Numerical simulations of convective heat transfer in Rayleigh-Benard convection and a rotating annulus. Numerical Heat Transfer Part A - Applications, 48 (6), pp. 529-545.

Johnson, M. A., MacGregor, S. A. and Wilson, M., 2005. Semi-empirical compressor performance analysis using only basic characteristic information. In: ASME Turbo Expo, 2009-06-08 - 2009-06-12, Orlando, FL.

Paul, M. C., Rees, D. A. S. and Wilson, M., 2005. The influence of higher order effects on the linear wave instability of vertical free convective boundary layer flow. International Journal of Heat and Mass Transfer, 48 (3-4), pp. 809-817.

Paul, M. C., Rees, D. A. S. and Wilson, M., 2005. The influence of higher order effects on the vortex instability of thermal boundary layer flow in a wedge-shaped domain. International Journal of Heat and Mass Transfer, 48 (8), pp. 1417-1424.

2004

Lock, G. D., Wilson, M. and Owen, J. M., 2004. Influence of Fluid-Dynamics on Heat Transfer in a Pre-Swirl Rotating-Disc System. In: ASME 49th International Gas Turbine and Aerospace Congress, 2004-06-01, Vienna.

Hawley, J. G., Wilson, M., Campbell, N. A. F., Hammond, G. P. and Leathard, M. J., 2004. Predicting boiling heat transfer using computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 218 (5), pp. 509-520.

Randriamampianina, A., Schiestel, R. and Wilson, M., 2004. The turbulent flow in an enclosed corotating disk pair: axisymmetric numerical simulation and Reynolds stress modelling. International Journal of Heat and Fluid Flow, 25 (6), pp. 897-914.

2003

Farzaneh Gord, M., Wilson, M. and Owen, J. M., 2003. Effects of swirl and flow rate on the flow and heat transfer in a pre-swirl rotating-disc system. In: International Gas Turbine Congress, 2007-12-01, Tokyo.

Lock, G. D., Yan, Y., Newton, P. J., Wilson, M. and Owen, J. M., 2003. Heat Transfer Measurements using Liquid Crystal in a Pre-Swirl Rotating-Disc System. In: ASME 48th International Gas Turbine and Aerospace Congress, 2003-06-01, Atlanta.

Yan, Y., Gord, M. F., Lock, G. D., Wilson, M. and Owen, J. M., 2003. Fluid dynamics of a pre-swirl rotor-stator system. Journal of Turbomachinery: Transactions of the ASME, 125 (4), pp. 641-647.

2002

King, M. P. and Wilson, M., 2002. Free convective heat transfer within rotating annuli. In: Proc. 12th International Heat Transfer Conference, 2002-08-01, Grenoble.

Megson, S. D., Wilson, M. and MacGregor, S. A., 2002. Multiphase flow investigation of a centrifugal filter. In: 4th Int. Symp. on computational technologies, 2002-08-01.

Hossain, M. A. and Wilson, M., 2002. Natural convection flow in a fluid-saturated porous medium enclosed by non-isothermal walls with heat generation. International Journal of Thermal Sciences, 41 (5), pp. 447-454.

Hossain, M. A. and Wilson, M., 2002. Natural convection flow in a fluid-saturated porous medium enclosed by non-isothermal walls with heat generation. International Journal of Thermal Sciences, 41 (5), pp. 447-454.

2001

Karabay, H., Wilson, M. and Owen, J. M., 2001. Approximate solutions for flow and heat transfer in pre-swirl rotating-disc systems. In: ASME, 2001-06-01.

Jaafar, A. A., Wilson, M. and Owen, J. M., 2001. Effects of geometry on flow and heat transfer in a rotating cavity with a stationary outer casing and peripheral flow. In: Proc. 4th European Conference on Turbomachinery, 2001-03-01, Florence.

Karabay, H., Wilson, M. and Owen, J. M., 2001. Predictions of effect of swirl on flow and heat transfer in a rotating cavity. International Journal of Heat and Fluid Flow, 22 (2), pp. 143-155.

Owen, J. M. and Wilson, M., 2001. Some current research in rotating-disc systems. In: Heat Transfer in Gas Turbine Systems, 2001-01-01.

Randriamampianina, A., Schiestel, R. and Wilson, M., 2001. Spatio-temporal behaviour in an enclosed corotating disk pair. Journal of Fluid Mechanics, 434, pp. 39-64.

Hossain, M. A., Hossain, A. and Wilson, M., 2001. Unsteady flow of viscous incompressible fluid with temperature-dependent viscosity due to a rotating disc in presence of transverse magnetic field and heat transfer. International Journal of Thermal Sciences, 40 (1), pp. 11-20.

2000

Hussain, S., Hossain, M. A. and Wilson, M., 2000. Natural convection flow from a vertical permeable flat plate with variable surface temperature and species concentration. Engineering Computations, 17 (6-7), pp. 789-812.

Karabay, H., Pilbrow, R., Wilson, M. and Owen, J. M., 2000. Performance of pre-swirl rotating-disc systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 122 (3), pp. 442-450.

1999

Pan, D., Whitfield, A. and Wilson, M., 1999. Design considerations for the volutes of centrifugal fans and compressors. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (4), pp. 401-410.

Karabay, H., Chen, J. X., Pilbrow, R., Wilson, M. and Owen, J. M., 1999. Flow in a "cover-plate" preswirl rotor-stator system. Journal of Turbomachinery: Transactions of the ASME, 121 (1), pp. 160-166.

Pilbrow, R., Karabay, H., Wilson, M. and Owen, J. M., 1999. Heat transfer in a "cover-plate" preswirl rotating-disk system. Journal of Turbomachinery: Transactions of the ASME, 121 (2), pp. 249-256.

Mirzaee, I., Quinn, P., Wilson, M. and Owen, J. M., 1999. Heat transfer in a rotating cavity with a stationary stepped casing. Journal of Turbomachinery: Transactions of the ASME, 121 (2), pp. 281-287.

1998

Dilin, P., Sakai, T., Wilson, M. and Whitfield, A., 1998. A computational and experimental evaluation of the performance of a centrifugal fan volute. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 212 (A4), pp. 235-246.

Mirzaee, I., Gan, X., Wilson, M. and Owen, J. M., 1998. Heat transfer in a rotating cavity with a peripheral inflow and outflow of cooling air. Journal of Turbomachinery: Transactions of the ASME, 120 (4), pp. 818-823.

1997

Wilson, M., Arnold, P. D., Lewis, T. W., Mirzaee, I., Rees, D. A. S. and Owen, J. M., 1997. Instability of flow and heat transfer in a rotating cavity with a stationary outer casing. In: Eurotherm 55 (Heat Transfer in a Single Phase Flow), 1997-09-01, Santorini.

Wilson, M., Karabay, H., Mirzaee, I. and Owen, J. M., 1997. Modelling flow in internal cooling-air systems of gas- turbine engines. In: 2nd European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, 1997-03-01, Antwerp.

Wilson, M., Pilbrow, R. and Owen, J. M., 1997. Flow and heat transfer in a preswirl rotor-stator system. Journal of Turbomachinery: Transactions of the ASME, 119 (2), pp. 364-373.

1996

Wilson, M., Chen, J. X. and Owen, J. M., 1996. Computation of flow and heat transfer in rotating-disc systems. In: 3rd International Conference on Computers in Reciprocating Engines and Gas Turbines, 1996-01-01, London.

1995

Wilson, M., Pilbrow, R. G. and Owen, J. M., 1995. Flow and heat transfer in a pre-swirl rotor-stator system. In: ASME International Gas Turbine and Aero Engine Congress, 1995-06-01, Houston, Texas.

1994

Wilson, M. and Owen, J. M., 1994. Axisymmetric computations of flow and heat transfer in a pre-swirl rotor- stator system. In: 1st International Conference Flow Interaction, 1994-09-01, Hong Kong.

Wilson, M., Chen, J. X., Pilbrow, R. G. and Owen, J. M., 1994. Computations of flow and heat transfer in pre-swirl rotor-stator systems. In: ICHMT International Symposium on Turbulence, Heat and Mass Transfer, 1994-08-01, Lisbon.

1993

Wilson, M., Syson, B. J. and Owen, J. M., 1993. Image processing techniques applied to wide-band thermochromic liquid crystals. In: Eurotherm, 1993-07-01.

Miller, P. and Wilson, M., 1993. Wall jets created by single and twin high-pressure jet impingement. Aeronautical Journal, 97 (963), pp. 87-100.

1992

Wilson, M., Kilic, M. and Owen, J. M., 1992. Computation of flow in rotating-disc systems. In: ICHMT International Symposium on Heat Transfer in Turbomachinery, 1992-08-01, Athens.

Wilson, M., 1992. Multigrid computation of rotating disc flows on distributed memory computers. In: Parallel supercomputing - (projects directory), 1992-01-01.

1991

Wilson, M., 1991. Parallel multigrid computation of rotating flows. In: Multiblock and multigrid methods on high performance computers, SERC workshop, 1991-11-01, Bath University.

Wilson, M., 1991. Porting mutli-grid codes to parallel systems. In: Parallel computing in computational fluid dynamics - SERC workshop, 1991-05-01, Daresbury.

1986

Wilson, M. and Wallace, F.J., 1986. A comprehensive phenomenological model of the jet mixing process in D.I. diesel engines. In: International Off-Highway and Powerplant Congress and Exposition, 1986-09-08 - 1986-09-10, Milwaukee, WI.

This list was generated on Fri Oct 24 18:49:55 2014 IST.