Research

Items by Lock, Gary

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 94.

Scobie, J., Sangan, C. M., Wilson, M. A., Owen, J. M. and Lock, G. D., 2014. Experimental measurements of hot gas ingestion through turbine rim seals at off-design conditions. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 228 (5), pp. 491-507.

Sangan, C., Lalwani, Y., Owen, M. and Lock, G., 2014. Fluid dynamics of a gas turbine wheel-space with ingestion. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 228 (5), pp. 508-524.

Scobie, J., Sangan, C., Teuber, R., Pountney, O., Owen, M., Wilson, M. and Lock, G., 2014. Experimental measurements of ingestion through turbine rim seals. Part 4: Off-design conditions (ASME GT2013-94147). In: Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Vol. 3A. San Antonio, U.S.A.: ASME, V03AT15A002.

Sangan, C. M., Scobie, J., Owen, J. M., Lock, G. D., Tham, K.-M. and Laurello, V., 2014. Forthcoming. Performance of a finned turbine rim seal (GT2014-25626). In: ASME Turbo Expo 2014. Dusseldorf, Germany: ASME.

Owen, J. M., Wu, K., Scobie, J., Sangan, C. M., Cho, G. and Lock, G. D., 2014. Forthcoming. Use of pressure measurements to determine effectiveness of turbine rim seals (GT2014-25200). In: ASME Turbo Expo 2014. Dusseldorf, Germany: ASME.

Scobie, J. A., Pickering, S. G., Almond, D. P. and Lock, G. D., 2013. Fluid dynamics of cricket ball swing. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 227 (3), pp. 196-208.

Zhou, K., Wilson, M., Owen, J. M. and Lock, G. D., 2013. Computation of ingestion through gas turbine rim seals. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 227 (7), pp. 1101-1113.

Pountney, O., Sangan, C., Lock, G. D. and Owen, J. M., 2013. Effect of ingestion on temperature of turbine discs. Journal of Turbomachinery: Transactions of the ASME, 135 (5), 051010.

Sangan, C. M., Pountney, O. J., Scobie, J. A., Wilson, M., Owen, J. M. and Lock, G. D., 2013. Experimental measurements of ingestion through turbine rim seals, Part 3 : single and double seals. Journal of Turbomachinery: Transactions of the ASME, 135 (5), 051011.

Sangan, C. M., Pountney, O., Zhou, K., Owen, J. M., Wilson, M. and Lock, G., 2013. Experimental measurements of ingestion through turbine rim seals, Part 2 : rotationally-induced ingress. Journal of Turbomachinery: Transactions of the ASME, 135 (2), 021013.

Sangan, C. M., Pountney, O., Zhou, K., Wilson, M., Owen, J. M. and Lock, G., 2013. Experimental measurements of ingestion through turbine rim seals. Part 1 : externally induced ingress. Journal of Turbomachinery: Transactions of the ASME, 135 (2), 021012.

Teuber, R., Li, Y. S., Maltson, J., Wilson, M., Lock, G. D. and Owen, J. M., 2013. Computational extrapolation of turbine sealing effectiveness from test rig to engine conditions. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227 (2), pp. 167-178.

Sangan, C. M., Lalwani, Y., Owen, J. M. and Lock, G. D., 2013. Experimental measurements of ingestion through turbine rim seals. Part 5: Fluid dynamics of wheel-space (ASME GT2013-94148). In: Proceedings of the ASME Turbo Expo 2013. Vol. 3A. San Antonio, U.S.A.: ASME, V03AT15A003.

Pountney, O., Cho, G., Lock, G. D. and Owen, J. M., 2012. Solutions of Fourier's equation appropriate for experiments using thermochromic liquid crystal. International Journal of Heat and Mass Transfer, 55 (21-22), pp. 5908-5915.

Zhou, C., Hodson, H. and Lock, G., 2012. Thermal Performance of Cooled Tips in a High-Pressure Turbine Cascade. Journal of Propulsion and Power, 28 (5), pp. 900-911.

Owen, J. M., Zhou, K., Pountney, O., Wilson, M. and Lock, G., 2012. Prediction of ingress through turbine rim seals-part I : Externally induced ingress. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031012.

Owen, J. M., Pountney, O. and Lock, G., 2012. Prediction of ingress through turbine rim seals-part II : Combined ingress. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031013.

Javiya, U., Chew, J. W., Hills, N. J., Zhou, L., Wilson, M. and Lock, G. D., 2012. CFD analysis of flow and heat transfer in a direct transfer preswirl system. Journal of Turbomachinery: Transactions of the ASME, 134 (3), 031017.

Karnahl, J., Von Wolfersdorf, J., Tham, K. M., Wilson, M. and Lock, G., 2012. Computational fluid dynamics simulations of flow and heat transfer in a preswirl system: influence of rotating-stationary domain interface. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 134 (5), 052502.

Teuber, R., Li, Y.S., Maltson, J., Wilson, M., Lock, G. and Owen, J.M., 2012. Computational extrapolation of turbine sealing effectiveness from test rig to engine conditions. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15, Copenhagen.

Pountney, O., Sangan, C., Owen, M. and Lock, G., 2012. Effect of ingestion on temperature of turbine discs (ASME GT2012-68496). In: Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Vol. 4. Copenhagen, Denmark: ASME, pp. 1997-2012.

Sangan, C., Pountney, O., Scobie, J., Wilson, M., Owen, M. and Lock, G., 2012. Experimental measurements of ingestion through turbine rim seals. Part 3: Single and double seals (ASME GT2012-68493). In: Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Vol. 4. Copenhagen, Denmark: ASME, pp. 1983-1995.

Owen, M., Lock, G., Sangan, C., Tham, K. M., Laurello, V. and Lee, C.P., 2012. Finned seal assembly for gas turbine engines. USPTO-2012P08852US, 2012.

Hejmadi, M.V., Bullock, K., Gould, V. and Lock, G.D., 2012. Is choosing to go on placement a gamble? Perspectives from bioscience undergraduates. Assessment and Evaluation in Higher Education, 37 (5), pp. 605-618.

Bullock, K., Hejmadi, M. and Lock, G., 2012. Work placements for bioscience undergraduates: Are they really necessary? Journal of Biological Education, 46 (1), pp. 4-11.

Hunt, V. L., Lock, G. D., Pickering, S. G. and Charnley, A. K., 2011. Application of infrared thermography to the study of behavioural fever in the desert locust. Journal of Thermal Biology, 36 (7), pp. 443-451.

Karnahl, J., von Wolfersdorf, J., Tham, K. M., Wilson, M. and Lock, G., 2011. CFD simulations of flow and heat transfer in a pre-swirl system: influence of rotating-stationary domain interface. In: Proceedings of the ASME Turbo Expo 2011. ASME.

Sangan, C. M., Zhou, K., Owen, J. M., Pountney, O. J., Wilson, M. and Lock, G. D., 2011. Experimental measurements of ingestion through turbine rim seals. Part 1: Externally-induced ingress (ASME GT2011-45310). In: Proceedings of the ASME Turbo Expo 2011: Turbine Technical Conference and Exposition. Vol. 5. Vancouver, Canada: ASME, pp. 741-753.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2011. Effect of radial location of nozzles on heat transfer in preswirl cooling systems. Journal of Turbomachinery: Transactions of the ASME, 133 (2), 021023.

Sangan, C. M., Zhou, K., Litherland, K., Lam, R. and Lock, G. D., 2011. Thermal imaging as flow visualization for gas-turbine film cooling. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 225 (G4), pp. 417-431.

Zhou, K., Wilson, M., Owen, J. M. and Lock, G., 2011. Computation of ingestion through gas turbine rim seals. In: Proceedings of the ASME Turbo Expo. Vol. 5. ASME, pp. 767-777.

Sangan, C.M., Pountney, O.J., Zhou, K., Wilson, M., Owen, J.M. and Lock, G.D., 2011. Experimental measurements of ingestion through turbine rim seals. Part 2 : rotationally-induced ingress (ASME GT2011-45313). In: Proceedings of the ASME Turbo Expo, 2011. Vol. 5. Vancouver, Canada: ASME, pp. 755-765.

Krishnababu, S. K., Hodson, H. P., Booth, G. D., Lock, G. D. and Dawes, W. N., 2010. Aerothermal investigation of tip leakage flow in a film cooled industrial turbine rotor. Journal of Turbomachinery: Transactions of the ASME, 132 (2), 021016.

Javiya, U., Chew, J., Hills, N., Zhou, L., Wilson, M. and Lock, G., 2010. CFD analysis of flow and heat transfer in a direct transfer pre-swirl system. In: ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. Vol. 4. New York: American Society of Mechanical Engineers, pp. 1167-1178. (Proceedings of the ASME Turbo Expo)

Lock, G. D., Edwards, S. and Almond, D. P., 2010. Flow visualization experiments demonstrating the reverse swing of a cricket ball. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 224 (3), pp. 191-199.

Owen, J. M., Pountney, O. and Lock, G., 2010. Prediction of ingress through turbine rim seals : Part 2 combined ingress. In: ASME Turbo Expo 2010. Vol. 4. New York, U. S. A.: American Society of Mechanical Engineers, pp. 1235-1245. (Proceedings of the ASME Turbo Expo)

Owen, J. M., Zhou, K., Wilson, M., Pountney, O. and Lock, G., 2010. Prediction of ingress through turbine rim seals part 1 : externally-induced ingress. In: ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. Vol. 4. American Society of Mechanical Engineers, pp. 1217-1234. (Proceedings of the ASME Turbo Expo)

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Accurate heat transfer measurements using thermochromic liquid crystal, Part 2 : application to a rotating disc. International Journal of Heat and Fluid Flow, 30 (5), pp. 950-959.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Accurate heat transfer measurements using thermochromic liquid crystal. Part 1: calibration and characteristics of crystals. International Journal of Heat and Fluid Flow, 30 (5), pp. 939-949.

Bullock, K., Gould, V., Hejmadi, M. and Lock, G., 2009. Work placement experience: should I stay or Should I go? Higher Education Research and Development, 28 (5), pp. 481-494.

Kakade, V., Lock, G., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Effect of Location of Nozzles on Heat Transfer in pre-Swirl Cooling Systems. In: 54th International Gas Turbine and Aerospace Congress, 2009-06-01, Orlando.

Lock, G., Bullock, K., Gould, V. and Hejmadi, M., 2009. Exploring the industrial-placement experience for Mechanical Engineering undergraduates. Engineering Education: Journal of the Higher Education Academy, Engineering Subject (1), pp. 42-51.

Bannister, C., Brace, C., Lock, G., Taylor, J., Brooks, T. and Fraser, N., 2009. Experimental characterisation of heat transfer in exhaust pipe sections. SAE International Journal of Materials & Manufacturing, 1 (1), pp. 136-144.

Lewis, P., Wilson, M., Lock, G. D. and Owen, J. M., 2009. Effect of radial location of nozzles on performance of preswirl systems : a computational and theoretical study. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (2), pp. 179-190.

Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Newton, S. J. and Lock, G. D., 2009. Numerical and experimental investigation of tip leakage flow and heat transfer using idealised rotor-tip models at transonic conditions. Aeronautical Journal, 113 (1141), pp. 165-175.

Krishnababu, S. K., Newton, P. J., Dawes, W. N., Lock, G. D., Hodson, H. P., Hannis, J. and Whitney, C., 2009. Aerothermal Investigations of Tip Leakage Flow in Axial Flow Turbines-Part I: Effect of Tip Geometry and Tip Clearance Gap. Journal of Turbomachinery: Transactions of the ASME, 131 (1), 011006.

Krishnababu, S. K., Dawes, W. N., Hodson, H. P., Lock, G. D., Hannis, J. and Whitney, C., 2009. Aerothermal Investigations of Tip Leakage Flow in Axial Flow Turbines-Part II: Effect of Relative Casing Motion. Journal of Turbomachinery: Transactions of the ASME, 131 (1), 011007.

Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney, C., 2009. Aerothermal investigations of tip leakage flow in axial flow turbines-part III : TIP cooling. Journal of Turbomachinery: Transactions of the ASME, 131 (1), 011008.

Lock, G., Holland, E. C., Cranston, G., Kakade, V., Lewis, P. and Pilbrow, R. G., 2009. Boundary layers explained : An undergraduate laboratory using an aerofoil with leading-edge slat. International Journal of Mechanical Engineering Education, 37 (1), pp. 45-66.

Lock, G., Holland, E. C., Cranston, G., Kakade, V., Lewis, P. and Pilbrow, R. G., 2009. Boundary layers explained: An undergraduate laboratory using an aerofoil with leadingedge slat. International Journal of Mechanical Engineering Education, 37 (1), pp. 45-66.

Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E., 2009. Effect of radial location of nozzles on heat transfer in pre-swirl cooling systems. In: Proceedings of the ASME Turbo Expo 2009. Vol. 3. ASME, pp. 1051-1060.

Genc, M. S., Kaynak, U. and Lock, G. D., 2009. Flow over an aerofoil without and with a leading-edge slat at a transitional Reynolds number. Proceedings of the Institution of Mechanical Engineers Part G - Journal of Aerospace Engineering, 223 (G3), pp. 217-231.

Genc, M. S., Lock, G. and Kaynak, U., 2008. An Experimental and Computational of Low Re Number Transitional Flows over an Aerofoil with Leading Edge Slat. In: 8th AIAA Aviation, Technology and Operation Conference, 2008-09-14 - 2008-09-19, Alaska.

Hunt, V., Charney, K. and Lock, G., 2008. Thermal imaging establishes behavioural fever in the desert locust, Schistocerca gregaria during mycosis. In: 23rd International Congress on Entomology, 2008-07-06 - 2008-07-12, Durban.

Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Lock, G., Booth, G. D. and , S. I. T. L., L., 2008. Aero-thermal investigation of tip leakage flow in a film cooled industrial turbine rotor. In: 2008 ASME Turbo Expo, 2008-06-09 - 2008-06-13, Berlin.

Krishnababu, S. K., Booth, G. D., Hodson, H. P., Lock, G. and Dawes, W. N., 2008. Aero-Thermal Investigation of Tip Leakage Flow in a Film-Cooled Industrial Turbine. In: 53rd International Gas Turbine and Aerospace Congress, 2008-05-01, Berlin.

Lock, G. and Wright, C., 2008. In undergraduate industrial design exercise at Rolls-Royce plc. International Journal of Mechanical Engineering Education, 36 (1), pp. 37-47.

Genc, M. S., Lock, G. and Kaynak, U., 2008. An experimental and computational study of low Re number transitional flows over an aerofoil with leading edge slat. In: 8th AIAA Aviation Technology, Integration and Operations (ATIO) Conference, September 14, 2008 - September 19, 2008, 2008-09-14 - 2008-09-19, Anchorage, AK.

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2008. Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems. In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin.

Bannister, C., Brace, C., Lock, G., Taylor, J., Brooks, T. and Fraser, N., 2008. Experimental Characterisation of Heat Transfer in Exhaust Pipe Sections. In: SAE World Congress & Exhibition, 2008-04-01, Detroit, MI.

Lock, G., 2007. Fluid Mechanics with Historical Perspective. Engineering Education: Journal of the Higher Education Academy. Engineering Subject Centre (2), 1, pp. 33-40.

Krishnababu, S. K., Newton, P. J., Lock, G. D., Dawes, W. N., Hodson, H. P., Hannis, J. and Whitney, C., 2007. Aero-Thermal Investigations Of Tip Leakage Flow In Axial Flow Turbines: Part 1- Effect Of Tip Geometry. In: ASME 52nd International Gas Turbine and Aerospace Congress, 2007-05-01, Montreal.

Krishnababu, K., Hodson, H. P., Dawes, W. N., Lock, G. D., Hannis, J. and Whitney, C., 2007. Aero-Thermal Investigations Of Tip Leakage Flow In Axial Flow Turbines: Part 2- Effects Of Relative Casing Motion. In: ASME 52nd International Gas Turbine and Aerospace Congress, 2007-05-01, Montreal.

Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney, C., 2007. Aero-Thermal Investigations Of Tip Leakage Flow In Axial Flow Turbines: Part 3- Tip Cooling. In: ASME 52nd International Gas Turbine and Aerospace Congress, 2007-05-01, Montreal.

Lewis, P., Wilson, M., Lock, G. and Owen, J. M., 2007. Physical interpretation of flow and heat transfer in preswirl systems. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 129 (3), pp. 769-777.

Zhang, D., Varah, S., Lock, G. D. and Wilson, M., 2006. Thermal Modelling of Heat Transfer in a Rotating Disc Due to Superposed Flow of Cooling Air. In: 13th International Heat Transfer Conference, 2006-08-01, Sydney.

Lock, G. D., Child, M., Cheng, V., Johnson, R., Mezzullo, W., Pattinson, C., Peet, S. and Wright, C., 2006. An Undergraduate Industrial Design Exercise at Rolls-Royce plc. In: ASME 51st International Gas Turbine and Aerospace Congress, 2006-05-01, Barcelona.

Lewis, P. R., Wilson, M., Lock, G. D. and Owen, J. M., 2006. Physical Interpretation of Flow and Heat Transfer in Pre-swirl Systems. In: ASME 51st International Gas Turbine and Aerospace Congress, 2006-05-01, Barcelona.

Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney, C., 2006. Heat transfer and aerodynamics of turbine blade tips in a linear cascade. Journal of Turbomachinery: Transactions of the ASME, 128 (2), pp. 300-309.

Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney, C., 2005. Heat Transfer and Aerodynamics of Turbine Blade Tips in a Linear Cascade. In: ASME 50th International Gas Turbine and Aerospace Congress, 2005-06-01, Reno.

Sargison, J. E., Oldfield, M. L. G., Guo, S. M., Lock, G. D. and Rawlinson, A. J., 2005. Flow visualisation of the external flow from a converging slot-hole film-cooling geometry. Experiments in Fluids, 38 (3), pp. 304-318.

Lock, G. D., Yan, Y. Y., Newton, P. J., Wilson, M. and Owen, J. M., 2005. Heat transfer measurements using liquid crystals in a preswirl rotating-disk system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 127 (2), pp. 375-382.

Lock, G. D., Wilson, M. and Owen, J. M., 2005. Influence of fluid dynamics on heat transfer in a preswirl rotating-disk system. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 127 (4), pp. 791-797.

Kingsley-Rowe, J. R., Lock, G. D. and Owen, J. M., 2005. Transient heat transfer measurements using thermochromic liquid crystal : lateral-conduction error. International Journal of Heat and Fluid Flow, 26 (2), pp. 256-263.

Lock, G. D., Wilson, M. and Owen, J. M., 2004. Influence of Fluid-Dynamics on Heat Transfer in a Pre-Swirl Rotating-Disc System. In: ASME 49th International Gas Turbine and Aerospace Congress, 2004-06-01, Vienna.

Forest, A. E., White, A. J., Lai, C. C., Guo, S. M., Oldfield, M. L. G. and Lock, G. D., 2004. Experimentally aided development of a turbine heat transfer prediction method. International Journal of Heat and Fluid Flow, 25 (4), pp. 606-617.

Coat, C. A. and Lock, G. D., 2004. Flow visualisation experiments for turbine film cooling. Aeronautical Journal, 108 (1086), pp. 403-409.

Lock, G. D., Yan, Y., Newton, P. J., Wilson, M. and Owen, J. M., 2003. Heat Transfer Measurements using Liquid Crystal in a Pre-Swirl Rotating-Disc System. In: ASME 48th International Gas Turbine and Aerospace Congress, 2003-06-01, Atlanta.

Sargison, J. E., Guo, S. M., Oldfield, M. L. G., Lock, G. D. and Rawlinson, A. J., 2003. Performance Predictions of a Converging Slot-Hole Film-Cooling Geometry. In: ASME 48th International Gas Turbine and Aerospace Congress, 2003-06-01, Atlanta.

Kingsley-Rowe, J. R., Lock, G. D. and Davies, A. G., 2003. Aerospace applications of luminescent paint Part one: Pressure measurement. Aeronautical Journal, 107 (1077), pp. 637-648.

Kingsley-Rowe, J. R., Lock, G. D. and Davies, A. G., 2003. Aerospace applications of luminescent paint Part two: Heat transfer measurement. Aeronautical Journal, 107 (1077), pp. 649-656.

Yan, Y., Gord, M. F., Lock, G. D., Wilson, M. and Owen, J. M., 2003. Fluid dynamics of a pre-swirl rotor-stator system. Journal of Turbomachinery: Transactions of the ASME, 125 (4), pp. 641-647.

Newton, P. J., Yan, Y. Y., Stevens, N. E., Evatt, S. T., Lock, G. D. and Owen, J. M., 2003. Transient heat transfer measurements using thermochromic liquid crystal. Part 1: An improved technique. International Journal of Heat and Fluid Flow, 24 (1), pp. 14-22.

Owen, J. M., Newton, P. J. and Lock, G. D., 2003. Transient heat transfer measurements using thermochromic liquid crystal. Part 2: Experimental uncertainties. International Journal of Heat and Fluid Flow, 24 (1), pp. 23-28.

Sargison, J. E., Guo, S. M., Oldfield, M. L. G., Lock, G. D. and Rawlinson, A. J., 2002. A converging slot-hole film-cooling geometry - Part 1: Low-speed flat-plate heat transfer and loss. Journal of Turbomachinery: Transactions of the ASME, 124 (3), pp. 453-460.

Sargison, J. E., Guo, S. M., Oldfield, M. L. G., Lock, G. D. and Rawlinson, A. J., 2002. A converging slot-hole film-cooling geometry - Part 2: Transonic nozzle guide vane heat transfer and loss. Journal of Turbomachinery: Transactions of the ASME, 124 (3), pp. 461-471.

Guo, E. E., Lai, C. C. L., Guo, S. M., Oldfield, M. G., Lock, G. D. and Rawlinson, A. J., 2002. Experimentally-Aided Development of a Turbine Heat Transfer Prediction Method. In: ASME 47th International Gas Turbine and Aerospace Congress, 2002-01-01, Amsterdam.

Sargison, J. E., Guo, S. M. L., Oldfield, M. G., Lock, G. D. and Rawlinson, A. J., 2002. Flow Visualisation of a Converging Slot-Hole Film-Cooling Geometry. In: ASME 47th International Gas Turbine and Aerospace Congress, 2002-01-01, Amsterdam.

Yan, Y., Gord, M. F., Lock, G. D., Wilsom, M. and Owen, J. M., 2002. Fluid Dynamics of a Pre-Swirl Rotating-Disc System. In: ASME 47th International Gas Turbine and Aerospace Congress, 2002-01-01, Amsterdam.

Sargison, J. E., Guo, S. M., Oldfield, M. L. G., Lock, G. D. and Rawlinson, A. J., 2001. A Converging Slot-Hole Film-Cooling Geometry. Part 2: Transonic Heat Transfer and Loss. In: ASME 46th International Gas Turbine and Aerospace Congress, 2001-01-01, New Orleans.

Sargison, J. E., Guo, S. M., Oldfield, M. L. G., Lock, G. and Rawlinson, A. J., 2001. A converging Slot-Hole Film-Cooling Geometry. Part 1: Low Speed Heat Transfer and Loss. In: 46th International Gas Turbine and Aerospace Congress, 2001-01-01, New Orleans.

Rowbury, D. A., Oldfield, M. L. G. and Lock, G. D., 2001. A method for correlating the influence of external crossflow on the discharge coefficients of film cooling holes. Journal of Turbomachinery: Transactions of the ASME, 123 (2), pp. 258-265.

Woods, M. I., Henderson, J. F. and Lock, G. D., 2001. Energy requirements for the flight of micro air vehicles. Aeronautical Journal, 105 (1045), pp. 135-149.

Rowbury, D. A., Oldfield, M. L. G. and Lock, G. D., 2001. Large-scale testing to validate the influence of external crossflow on the discharge coefficients of film cooling holes. Journal of Turbomachinery: Transactions of the ASME, 123 (3), pp. 593-600.

This list was generated on Fri Jul 25 19:37:24 2014 IST.