Research

Items by Miles, Anthony

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 237.

Wright, S. J., Boymans, T. A. E. J., Grimm, B., Miles, A. W. and Kessler, O., 2014. Forthcoming. Strong correlation between the morphology of the proximal femur and the geometry of the distal femoral trochlea. Knee Surgery, Sports Traumatology, Arthroscopy

Jauch, S. Y., Coles, L. G., Ng, L. V., Miles, A. W. and Gill, H. S., 2014. Low torque levels can initiate a removal of the passivation layer and cause fretting in modular hip stems. Medical Engineering & Physics, 36 (9), pp. 1140-1146.

Coles, L. G., Gheduzzi, S. and Miles, A. W., 2014. The Effect of Femoral Rotation During Total Knee Arthroplasty on Patellofemoral Contact Characteristics. In: 7th WCB 2014, 2014-07-06 - 2014-07-11, Boston.

Holsgrove, T. P., Gheduzzi, S., Gill, H. S. and Miles, A. W., 2014. The development of a dynamic, six-axis spine simulator. The Spine Journal, 14 (7), pp. 1308-1317.

Coles, L. G., Gheduzzi, S. and Miles, A. W., 2014. Femoral component rotation of a modern tka implant does not affect pfj biomechanics. In: BORS 2014, 2014-06-23 - 2014-06-24, Bath.

Crosnier, E., Keogh, P. and Miles, A. W., 2014. Forthcoming. A novel method to assess primary stability of press-fit acetabular cups. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine

Holsgrove, T. P., Pentlow, A., Spencer, R. and Miles, A. W., 2014. Forthcoming. Cement Brand and Preparation effects Cement on Cement Mantle Shear Strength. Hip International

Jauch, S. Y., Miles, A. W. and Gill, H. S., 2014. Does the surface finish, the taper angle difference and the assembly force effect the taper strength between stem and ball head of a modular hip implant? In: Orthopaedic Research Society 2014 Annual Meeting, 2014-03-15 - 2014-03-18, New Orleans.

Holsgrove, T. P., Gill, H. S., Miles, A. W. and Gheduzzi, S., 2014. Forthcoming. The Dynamic, Six-Axis Stiffness Matrix Testing of Porcine Spinal Specimens. The Spine Journal

Avis, D., Wright, S., Forder, J., Miles, A. W. and Holsgrove, T. P., 2014. Volar Locking Plates for Distal Radius Fractures : A Biomechanical Study Investigating Optimal Locking Screw Trajectory. In: British Orthopaedic Research Society Annual Meeting, 2014-06-23 - 2014-06-24, Bath.

Jauch, S. Y., Brace, M., Miles, A. W. and Gill, H. S., 2013. Effect of stem trunnion roughness and assembly force on modular junction strength. In: ASTM International Workshop on Modularity and Tapers in Total Joint Replacement Devices, 2013-11-12, Jacksonville.

Fitzgerald, L. G., Miles, A. W. and Titchener, A., 2013. Development of a synthetic collateral ligament model for use in an in vitro kinematic knee simulator. In: CORS 2013, 2013-10-11 - 2013-10-16, Venice.

Holsgrove, T. P., Pentlow, A. and Miles, A. W., 2013. An in-vitro investigation of shear strength of cement on cement mantles. In: 8th Combined Meeting of Orthopaedic Research Societies 2013, 2013-10-13 - 2013-10-16, Venice.

Wright, S., Kessler, O., Boymans, T., Miles, A. W. and Grimm, B., 2013. Linking proximal femur morphology to that of the distal femur. In: ISTA 2013, 2013-10-17 - 2013-10-19, Palm Beach, Florida.

Jauch, S. Y., Ng, L. V., Peirce, S. R., Dhokia, V., Miles, A. W. and Gill, H. S., 2013. The assembly load influences the fretting behaviour at taper interfaces of modular hip prostheses: an in vitro study. In: 8th Combined Meeting of Orthopaedic Research Societies, 2013-10-13 - 2013-10-16, Venice.

Wright, S., Pincher, N. and Miles, A. W., 2013. Why does a collared and anatomically shaped total hip stem yield successful clinical results? In: 8th Combined Meeting of Orthopaedic Research Societies, 2013-10-13 - 2013-10-16, Venice.

Long, R., Gheduzzi, S., Bucher, T., Toms, A. and Miles, A. W., 2013. A biomechanical evaluation of hinged total knee replacement prostheses. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 227 (8), pp. 875-883.

Maurel, M. L., Fitzgerald, L. G., Miles, A. W. and Giddins, G. E. B., 2013. Biomechanical study of the efficacy of a new design of wrist guard. Clinical Biomechanics, 25 (5), pp. 509-513.

Holsgrove, T. P., Petheram, T., Miles, A. W. and Timperley, A. J., 2013. Distal stem features improve torsional resistance of long-stem cemented revision hip stems : An in vitro biomechanical study. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 227 (5), pp. 503-509.

Gardner, R., Yousri, T., Holmes, F., Clark, D., Pollintine, P., Miles, A. W. and Jackson, M., 2013. Stabilisation of the syndesmosis in the maisonneuve fracture: A biomechanical study comparing 2-hole locking plate and quadricortical screw fixation. Journal of Orthopaedic Trauma, 27 (4), pp. 212-216.

Burton, N. J., Miles, A. W. and Pollintine, P., 2013. Biomechanical comparison of a novel castless arthrodesis plate with -plate and cross pin techniques for canine partial carpal arthrodesis. Veterinary and Comparative Orthopaedics and Traumatology, 26 (3), pp. 165-171.

Ramoutar, D., Crosnier, E., Gill, H.S. and Miles, A. W., 2013. Disassembly force for modular head/trunnion junction increases with increasing assembly load. In: Annual Scientific Meeting of the British Hip Society, 2013-02-27 - 2013-03-01, Bristol.

Mitra, A., Fitzgerald, L., Gill, H.S. and Miles, A. W., 2013. To hit or not to hit : Modular hips, a review of assembly methodology. In: Annual Scientific Meeting of the British Hip Society, 2013-02-27 - 2013-03-01, Bristol.

Miles, A. W. and Gheduzzi, S., 2012. Basic biomechanics and biomaterials. Surgery (Oxford), 30 (2), pp. 86-91.

Schmotzer, H., Gheduzzi, S., Holsgrove, T. P. and Miles, A. W., 2012. Biologic Fixation - A Systematic Approach. In: Material and Surface Technology for Implants, 2012-04-23, Interlaken.

Petheram, T.G., Holsgrove, T. P., Timperley, A.J. and Miles, A. W., 2012. Distal Stem Features Improve the Torsional Resistance of Cemented Polished Revision Hip Stems – An In Vitro Biomechanical Study. In: British Orthopaedic Research Society Annual Meeting, 2012-07-24, London.

Holsgrove, T. P., Gheduzzi, S. and Miles, A. W., 2012. Dynamic Comparison of Porcine Lumbar Specimens with Intact Discs and Disc Replacements. In: 20th Annual Meeting, European Orthopaedic Research Society, 2012-09-26 - 2012-09-28, Amsterdam.

Miles, A., Turner, I. and Gittings, J., 2011. Bone Substitute Material. A61L27/56-ES2360402 (T3), 03 June 2011.

Kulikov, Y. I., Vinogradova, Y., Miles, A. W. and Giddins, G., 2011. Optimal configuration of the spiral linking technique for tendon repair. Biomechanical evaluation. Journal of Hand Surgery-European Volume, 36E (3), pp. 210-214.

Miles, A., 2011. Biomechanics of the knee joint. In: Streicher, R., ed. Tribology and Bearing Surfaces in Total Joint Replacement. .

Hao, S. Y., Taylor, J. T., Bowen, C. R., Gheduzzi, S. and Miles, A. W., 2010. Sensing methodology for in vivo stability evaluation of total hip and knee arthroplasty. Sensors and Actuators A-Physical, 157 (1), pp. 150-160.

Ho, K. W. K., Gilbody, J., Jameson, T. and Miles, A. W., 2010. The effect of 4 mm bicortical drill hole defect on bone strength in a pig femur model. Archives of Orthopaedic and Trauma Surgery, 130 (6), pp. 797-802.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2009. Mechanical properties of three different compositions of calcium phosphate bioceramic following immersion in Ringer’s solution and distilled water. Journal of Materials Science: Materials in Medicine, 20 (12), pp. 2367-2374.

Wilson, A. J., Murphy, C. M., Brook, B. S., Breen, D., Miles, A. W. and Tilley, D. G., 2009. A computer model of the artificially ventilated human respiratory system in adult intensive care. Medical Engineering & Physics, 31 (9), pp. 1118-1133.

Taylor, J., Hao, S. and Miles, A. W., 2009. A Sensor. A61B5/00-WO2009125188 (A1), 15 October 2009.

Hsu, Y. H., Turner, I. and Miles, A. W., 2009. Mechanical properties of calcium phosphate bioceramics after immersion in Ringer’s and distilled water. In: 22nd European Conference on Biomaterials (ESB2009), 2009-09-07 - 2009-09-11, Lausanne.

Hsu, Y. H., Turner, I. and Miles, A. W., 2009. The effect of calcium phosphate ceramic composition on in vitro dissolution/precipitation behaviour. In: 22nd European Conference on Biomaterials (ESB2009), 2009-09-07 - 2009-09-11, Lausanne.

Gheduzzi, S., Dodd, S. P., Miles, A. W., Humphrey, V. F. and Cunningham, J. L., 2009. Numerical and experimental simulation of the effect of long bone fracture healing stages on ultrasound transmission across an idealized fracture. Journal of the Acoustical Society of America, 126 (2), pp. 887-894.

Brook, B. S., Murphy, C. M., Breen, D., Miles, A. W., Tilley, D. G. and Wilson, A. J., 2009. Theoretical models for the quantification of lung injury using ventilation and perfusion distributions. Computational and Mathematical Methods in Medicine, 10 (2), pp. 139-154.

Hao, S., Taylor, J., Miles, A. and Bowen, C., 2009. An implantable electronic system for in-vivo stability evaluation of prosthesis in Total Hip and Knee Arthroplasty. In: I2MTC: 2009 IEEE Instrumentation & Measurement Technology Conference. New York: IEEE, pp. 171-176. (IEEE Instrumentation and Measurement Technology Conference)

Pina, S., Olhero, S. M., Gheduzzi, S., Miles, A. W. and Ferreira, J. M. F., 2009. Influence of setting liquid composition and liquid-to-powder ratio on properties of a Mg-substituted calcium phosphate cement. Acta Biomaterialia, 5 (4), pp. 1233-1240.

Miles, A. W. and Gheduzzi, S., 2009. Basic biomechanics and biomaterials. Surgery (Oxford), 27 (2), pp. 90-95.

Procter, P., Hess, B., Murphy, M., Phelps, R. C., Miles, A. W. and Gheduzzi, S., 2008. In-vitro study of screw fixation in augmented cancellous bone models. In: 54th meeting of the Orthopaedic Research Society, 2008-03-02 - 2008-03-05, San Francisco.

Dodd, S. P., Cunningham, J. L., Miles, A. W., Gheduzzi, S. and Humphrey, V. F., 2008. Ultrasound transmission loss across transverse and oblique bone fractures: an in-vitro study. Ultrasound in Medicine & Biology, 34 (3), pp. 454-462.

Hao, S., Taylor, J., Miles, A. W. and Bowen, C. R., 2008. An implantable system for the in vivo measurement of Hip and Knee migration and micromotion. In: ICSES 2008 International Conference on Signals and Electronic Systems, ICSES'08, 2008-09-14 - 2008-09-17, Krakow.

Hsu, Y. H., Turner, I., Miles, A. W. and MacArthur, I., 2008. Dissolution studies of calcium phosphate bioceramics in SBF and distilled water. In: 8th World Biomaterials Congress 2008. Vol. 3. .

Dath, R., Sirkett, D. M., Gheduzzi, S. and Miles, A. W., 2008. Intradiscal pressure changes with dynamic pedicle screw systems. Journal of Spinal Disorders and Techniques, 21 (4), pp. 241-246.

Jewell, D. P. A., Gheduzzi, S., Mitchell, M. S. and Miles, A. W., 2008. Locking plates increase the strength of dynamic hip screws. Injury, 39 (2), pp. 209-212.

Humphrey, V. F., Dodd, S. P., Gheduzzi, S., Cunningham, J. L. and Miles, A. W., 2008. Numerical modelling and in-vitro studies of ultrasound signal loss across fractures in cortical bone mimics. Journal of the Acoustical Society of America, 123 (5), p. 3514.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2008. Techniques for manufacturing FGM bioceramics. Key Engineering Materials, 361-363, pp. 123-126.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2008. The effect of slip loading on the properties of porous calcium phosphate bioceramics. Key Engineering Materials, 361-363, pp. 19-22.

Percival, A., Dekoninck, E. A., Miles, A. W. and Holsgrove, T. P., 2007. Improved Mattress. A47C27-WO2007128967, 15 November 2007.

Jameson, T. M., Clements, J. P., Zweymuller, K., Lintner, F., Schmotzer, H., Miles, A. W. and Gheduzzi, S., 2007. Clinically relevant in-vitro hip stem stability studies in composite models.

Vickerstaff, J. A., Miles, A. W. and Cunningham, J. L., 2007. A brief history of total ankle replacement and a review of the current status. Medical Engineering & Physics, 29 (10), pp. 1056-1064.

Gheduzzi, S. and Miles, A. W., 2007. A review of pre-clinical testing of femoral stem subsidence and comparison with clinical data. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 221 (H1), pp. 39-46.

Kulikov, Y. I., Dodd, S., Gheduzzi, S., Miles, A. W. and Giddins, G. E., 2007. An in vitro biomechanical study comparing the spiral linking technique against the pulvertaft weave for tendon repair. Journal of Hand Surgery: European Volume, 32 (7), pp. 377-381.

Dodd, S. P., Cunningham, J. L., Miles, A. W., Gheduzzi, S. and Humphrey, V. F., 2007. An in vitro study of ultrasound signal loss across simple fractures in cortical bone mimics and bovine cortical bone samples. Bone, 40 (3), pp. 656-661.

Dath, R., Porter, K. M. and Miles, A. W., 2007. Anatomical measurements of porcine lumbar vertebrae. Clinical Biomechanics, 22 (5), pp. 607-613.

Mak, S., Cunningham, J. L. and Miles, A. W., 2007. Determination of Poisson's ratio and hoop strain of morsellised bone graft under uni-axial compressive loading. In: Transactions 53rd Annual Meeting of the Orthopaedic Research Society, 2007-01-01.

Mak, S. Y., Cunningham, J. L. and Miles, A. W., 2007. Elastic modulus and stress-strain characteristics of morsellised bone graft under different loading conditions. In: Transactions 6th Combined Meeting of the Orthopaedic Research Societies, 2007-01-01.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2007. Fabrication and Mechanical Testing of Porous Calcium Phosphate Bioceramic Granules. In: European Society for Biomaterials, 2007-09-01, Brighton.

Hsu, Y. S., Turner, I. G. and Miles, A. W., 2007. Fabrication of porous bioceramics with porosity gradients similar to the bimodal structure of cortical and cancellous bone. Journal of Materials Science: Materials in Medicine, 18 (12), pp. 2251-2256.

Lankaster, B. J. A., Sabri, O., Gheduzzi, S., Stoney, J. D., Miles, A. W. and Bannister, G. C., 2007. In-vitro pressurization of the acetabular cement mantle - the effect of a flange. Journal of Arthroplasty, 22 (5), pp. 738-744.

Mak, S. Y., Holsgrove, T. P. and Miles, A. W., 2007. In-vitro study of influence of impaction energy on medial strain distribution in the femur during impaction grafting. In: Transactions 53rd Annual Meeting of the Orthopaedic Research Society, 2007-01-01.

Mak, S. Y., Holsgrove, T. P. and Miles, A. W., 2007. In-vitro study of medial strain distribution in the femur during impaction grafting. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 221 (6), pp. 613-619.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2007. Mechanical Characterization of Calcium Phosphate Bioceramics with Interconnected Porosity. In: European Society for Biomaterials, 2007-09-01, Brighton.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2007. Mechanical characterization of dense calcium phosphate bioceramics with interconnected porosity. Journal of Materials Science: Materials Medicine, 18 (11), pp. 2319-2329.

Dodd, S. P., Miles, A. W., Gheduzzi, S., Humphrey, V. F. and Cunningham, J. L., 2007. Modelling the effects of different fracture geometries and healing stages on ultrasound signal loss across a long bone fracture. Computer Methods in Biomechanics and Biomedical Engineering, 10, pp. 371-375.

Brook, B. S., Murphy, C. M., Breen, D., Miles, A. W., Tilley, D. G. and Wilson, A. J., 2007. Quantification of lung injury using ventilation and perfusion distributions obtained from gamma scintigraphy. Physiological Measurement, 28 (12), pp. 1451-1464.

Hsu, Y. H. and Miles, A. W., 2007. Techniques for Manufacturing FGM Bioceramics. In: Bioceramics 20, 2007-01-01, Nantes.

Heal, J. S., Gozzard, C., Gheduzzi, S., Grimm, B., Learmonth, I. D. and Miles, A. W., 2007. The development of a model for in vitro testing of femoral stems in impaction bone grafting. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 221 (H4), pp. 377-384.

Mak, S. Y., Cunningham, J. L. and Miles, A. W., 2007. The effect on rate of impaction on morsellised bone graft. In: Transactions 6th Combined Meeting of the Orthopaedic Research Societies, 2007-01-01.

Webb, J. C. J., Gheduzzi, S., Spencer, R. F., Miles, A. W. and Learmonth, I. D., 2006. Creep behaviour of leading cement brands. In: British Orthopaedic Research Society/Bone Research Society, 2006-07-01, Southampton.

Phelps, R. C., Gheduzzi, S., Learmonth, I. D. and Miles, A. W., 2006. Stem heating and its effect on cement porosity. In: 52nd meeting of the Orthopaedic Research Society, 2006-03-01, Chicago.

Datta, A., Gheduzzi, S. and Miles, A. W., 2006. A comparison of the viscoelastic properties of bone grafts. Clinical Biomechanics, 21 (7), pp. 761-766.

Clements, J. P., Gheduzzi, S., Webb, J. C. J., Schmotzer, H., Learmonth, I. D. and Miles, A. W., 2006. An in-vitro comparison between the initial stability of a cementless stem in composite and cadveric models. In: British Orthopaedic Research Society, Bristol . J Bone Joint Surg, Orthopaedic Proceedings Suppl III, 2006-01-01.

Gittings, J. P., Turner, I. G. and Miles, A. W., 2006. Development of bone substitute materials - calcium phosphate scaffold materials. Journal of Bone and Joint Surgery - (British) Proceedings, 88-B, p. 388.

Gittings, J., Miles, A. W. and Turner, I. G., 2006. Development of bone substitute materials - calcium phosphate scaffold materials. In: British Orthopaedic Research Society, Bristol. J Bone Joint Surg, Orthopaedic Proceedings Suppl III, 2006-01-01.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2006. Fabrication of porous calcium phosphate bioceramics as synthetic cortical bone graft. In: British Orthopaedic Research Society, Bristol. J Bone Joint Surg, Orthopaedic Proceedings Suppl III, 2006-01-01.

Farooq, M. A., Clements, J. P. and Miles, A. W., 2006. In vitro monitoring of hoop strains during impaction grafting of the femur. Hip International, 16, pp. 223-231.

Gheduzzi, S., Webb, J. J. C. and Miles, A. W., 2006. Mechanical characterisation of three percutaneous vertebroplasty biomaterials. Journal of Materials Science: Materials in Medicine, 17 (5), pp. 421-426.

Sirkett, D. M., Miles, A. W., Mullineux, G. and Giddins, G. E. B., 2006. Predicting carpal kinematics using the minimum energy principle. In: British Orthopaedic Research Society, Bristol: J Bone Joint Surg, Orthopaedic Proceedings Suppl III, 2006-01-01.

Dath, R., Al-Rashid, M., Ebinesan, A. D., Porter, K. M. and Miles, A. W., 2006. The anatomy of the porcine spine and its comparison to the human spine. Journal Of Anatomy, 209, p. 562.

Phelps, R. C., Gheduzzi, S., Learmonth, I. D. and Miles, A. W., 2005. Does component heating affect the porosity within a bone cement mantle? In: HIP, 2005-07-01, Lisbon.

Reddy, V. R. M., Miles, A. W., Cunningham, J. L., Gheduzzi, S. and Henman, P., 2005. Comparison of biomechanical properties of flexible steel and titanium intramedullary nails in adolescent fractures. In: Journal of Bone and Joint Surgery - British Volume, 2005-06-01, Lisbon.

Sabri, O., Lankester, B. J. A., Stoney, J. A., Gheduzzi, S., Miles, A. W. and Bannister, G. C., 2005. In-vitro pressurisation of the acetabular cement mantle - the effect of a flange.

Gheduzzi, S., Webb, J. C. J., Wylde, V., Spencer, R. F., Learmonth, I. D. and Miles, A. W., 2005. Mechanical evaluation of plain and antibiotic laden bone cements: static or viscoelastic properties? In: Journal of Bone and Joint Surgery Proceedings (March 2006), 2005-06-01, Lisbon.

Clements, J. P., Gheduzzi, S., Zweymuller, K., Litner, F., Schmotzer, H., Learmonth, I. D. and Miles, A. W., 2005. An in-vitro cadaveric biomechanical evaluation of the SL Plus hip stem - comparison of long and short term stability.

Gheduzzi, S., Clements, J. P., Webb, J. C. J., Schmotzer, H., Learmonth, I. D. and Miles, A. W., 2005. In-vitro post-operative stem stability using composite and cadaveric models.

Gozzard, C., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2005. An in-vitro investigation into the cement pressurization achieved during insertion of four different femoral stems. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 219 (H6), pp. 407-413.

Gittings, J. P., Turner, I. G. and Miles, A. W., 2005. Calcium Open Porous Scaffold Bioceramics. In: Bioceramics 17, 2005-01-01, New Orleans, Louisana.

Gittings, J. P., Turner, I. G. and Miles, A. W., 2005. Calcium phosphate open porous scaffold bioceramics. In: Bioceramics 17, 2005-01-01, New Orleans, Louisana.

Alda, D. N., Kitsis, C. and Miles, A. W., 2005. Compression forces generated by Mini-bone screws: A comparative study done on a bone model. Injury, 36 (1), pp. 65-70.

Leonard, L., Sirkett, D., Mullineux, G., Giddins, G. E. B. and Miles, A. W., 2005. Development of an in-vivo method of wrist joint motion analysis. Clinical Biomechanics, 20, pp. 166-171.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2005. Fabrication of porous calcium phosphate bioceramics as synthetic cortical bone graft. In: Bioceramics 17, 2005-01-01, New Orleans, Louisana.

Gheduzzi, S., Webb, J. C. J. and Miles, A. W., 2004. A biomechanical evaluation of three vertebroplasty materials.

Dodd, S. P., Cunningham, J. L., Miles, A. W., Humphrey, V. F. and Gheduzzi, S., 2004. Ultrasonic wave propagation in cortical bone mimics. In: 148th Meeting of the Acoustical Society of America, 2004-11-15 - 2004-11-19, San Diego, CA.

Gheduzzi, S., Humphrey, V. F., Dodd, S. P., Cunningham, J. L. and Miles, A. W., 2004. Ultrasound attenuation as a quantitative measure of fracture healing. In: 148th Meeting of the Acoustical Society of America, 2004-11-15 - 2004-11-19, San Diego, CA.

Sirkett, D., Mullineux, G. M., Miles, A. W. and Giddins, G. E. B., 2004. A hypothesis of carpal kinematics based upon maximisation of contact area. In: Triennial International Wrist and Hand Symposium, 2004-09-01, Syracuse University.

Turner, I., Miles, A. W., Casey, B. P. and Hsu, Y.-H., 2004. Bone Substitute Material. A61L24/00-WO2004065329 (A1), 05 August 2004.

Gheduzzi, S., Clements, J. P., Webb, J. C. J., Zweymuller, K., Lintner, F., Schmotzer, h., Learmonth, I. D. and Miles, A. W., 2004. Post-operative stability of the SL-Plus stem: an in vitro comparison between cadaveric and composite models. In: EUROPEAN HIP SOCIETY 2004 Domestic Meeting, 2004-06-23 - 2004-06-26, Innsbruck.

Lankester, B. J. A., Stoney, J. D., Gheduzzi, S., Miles, A. W. and Bannister, G. C., 2004. The optimal thickness of the acetabular cement mantle - a biomechanical analysis. In: EUROPEAN HIP SOCIETY 2004 Domestic Meeting, 2004-06-23 - 2004-06-26, Innsbruck.

Lankester, B. J. A., Stoney, J. D., Gheduzzi, S., Miles, A. W. and Bannister, G. C., 2004. The optimum thickness of the acetabular cement mantle - a biomechanical analysis.

Sirkett, D. M., Mullineux, G., Miles, A. W. and Giddins, G. E. B., 2004. A hypothesis of carpal bone motion: does form govern function? In: Transactions 50th Orthopaedic Research Society, 2004-01-01, San Francisco.

Sirkett, D. M., Mullineux, G., Giddins, G. E. B. and Miles, A. W., 2004. A kinematic model of the wrist based on maximization of joint contact area. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 218, pp. 349-359.

Turner, H. C., Yate, R. M., Giddins, G. E. B. and Miles, A. W., 2004. A method for measuring forces applied to the upper limb during sit-to-stand. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 218, pp. 461-465.

Grimm, B., Miles, A. W. and Turner, I. G., 2004. A simple compression test to predict the mechanical stability of synthetic bone graft extenders in impaction grafting. In: Transactions 7th World Biomaterials Congress, 2004-01-01, Sydney.

Lankester, B. J. A., Stoney, J., Gheduzzi, S., Miles, A. W. and Bannister, G. C., 2004. Acetabular cement mantle: What is the optimum thickness?

Rigby, M. C., Miles, A. W. and Ross, A. C., 2004. Allograft size and impaction force in revision hip arthroplasty. In: 6th Congress of EFORT, Helsinki:, 2004-01-01.

Gittings, J. P., Turner, I. G. and Miles, A. W., 2004. Development of Bone Substitute Materials : Calcium Phosphate Scaffold Materials. In: Proceedings of the World Biomaterials Congress, Sydney, 2004-05-01.

Gittings, J., Turner, I. G. and Miles, A. W., 2004. Development of bone substitute materials - calcium phosphate scaffold materials. In: Transactions 7th World Biomaterials Congress, 2004-01-01, Sydney.

Grimm, B., Miles, A. W. and Turner, I. G., 2004. Standardised experimental method for the identification of ceramic bone graft extenders mechanically suited for impaction grafting. In: Transactions 50th Orthopaedic Research Society, 2004-01-01, San Francisco.

Grimm, B., Heyligers, I. C., Miles, A. W., Turner, I. G., Haaren, E. H., Smit, T. H. and Boshuizen, K., 2004. Subsidence and implant stability in impaction bone grafting using bone allografts and ceramic bone substitutes. Comparison between three experimental methods. Hip International, 14 (No.2), p. 69.

Gheduzzi, S., Phelps, R., Eastaugh-Waring, S., Learmonth, I. D. and Miles, A. W., 2004. Temperature at the cement bone interface and variation with stem pre-heating. In: EUROPEAN HIP SOCIETY 2004 Domestic Meeting, 2004-06-23 - 2004-06-26, Innsbruck.

Sirkett, D. M., Mullineux, G., Leonard, L., Giddins, G. E. B. and Miles, A. W., 2004. The application of optimisation in establishing wrist joint axes of motion. Journal of Bone and Joint Surgery - British Volume, 86-B: 1.

Eastwood, G. and Miles, A. W., 2003. Biomechanical analysis of sliding in keyed and non-keyed compression hip screws. In: British Trauma Society Meeting, 2003-10-01, London.

Turner, H. C., Yate, R. C., Miles, A. W., Giddins, G. E. B., Morgan, H. M., Starrat, H. C. and Duck, F. A., 2003. A system to measure wrist forces during sit-to-stand.

Lankester, B. J. A., Stoney, J. A., Gheduzzi, S., Miles, A. W. and Bannister, G. C., 2003. The acetabular cement mantle - does thickness matter? In: European Orthopeadic Research Society, 2003-06-01, Helsinki.

Heal, J. S., Gheduzzi, S., Learmonth, I. D. and Miles, A. W., 2003. The relevance of the stem taper angle in femoral impaction grafting.

Lankester, B. J. A., Stoney, J. D., Gheduzzi, S., Miles, A. W. and Bannister, G. C., 2003. An in-vitro evaluation of optimal acetabular cement mantle thickness.

Grimm, B., Miles, A. W. and Turner, I. G., 2003. Measurement of impaction quality and correlation with stability in impaction. In: Transactions 49th Annual Meeting Orthopaedic Research Society, 2003-02-01, New Orleans.

Grimm, B., Miles, A. W. and Turner, I. G., 2003. Measurement of impaction quality and correlation with stability in impcation grafting. In: Transactions 49th Orthopaedic Research Society, 2003-02-01, New Orleans.

Vadivelu, R., Baker, A. S., Miles, A. W., Gheduzzi, S., Cunningham, J. L. and Chetwynd, D., 2003. A mechanical comparison of dynamic compression plate, limited contact dynamic compression plate and the fixclips. In: Meeting of the British Trauma Society, 2003-01-01.

Sirkett, D. M., Leonard, L., Mullineux, G., Giddins, G. E. B. and Miles, A. W., 2003. A novel method of modelling wrist kinematics. In: Transactions 49th Annual Meeting of the Orthopaedic Research Society, 2003-01-01.

Alda, D. N., Kitsis, C., Jones, C. and Miles, A. W., 2003. Abs compression forces generated by mini-bone screws. A comparison on simulated bone model. In: European Orthopaedic Research Society Meeting, 2003-01-01, Helsinki.

Gozzard, C., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2003. An in vitro investigation of the CPS-Plus femoral stem: Influence of the proximal centraliser on cement pressurisation during stem insertion. Acta Orthopaedica Scandanavica, 74 (2), pp. 154-158.

Vadivelu, R., Drew, S. J., Baker, A. S., Miles, A. W., Gheduzzi, S., Cunningham, J. L. and Chetwynd, D. G., 2003. Bio-mechanical comparison of four different forms of fixation used for two-part proximal humeral fractures. Injury, 34 (8), p. 599.

Selzer, G., Gheduzzi, S. and Miles, A. W., 2003. Biomechanical analysis of different proximal fixation devices. In: European Orthopaedic Research Society Meeting, 2003-01-01, Helsinki.

Eastwood, G. and Miles, A. W., 2003. Biomechanical analysis of sliding in keyed and non-keyed compression hip screws. In: Proceedings 71st Annual Meeting American Academy of Orthopaedic Surgeons, 2003-01-01, San Fransisco.

Sirkett, D. M., Mullineux, G., Miles, A. W. and Giddins, G. E. B., 2003. Can wrist motion be predicted by maximizing contact area. In: Proc IPEM Annual Scientific Meeting, 2003-01-01.

Heal, J. S., Gheduzzi, S., Learmonth, I. D. and Miles, A. W., 2003. Does size matter, or is it just technique? The relevance of stem taper angle in revision arthoplasty in a cemented environment. In: European Orthopaedic Research Society Meeting, 2003-01-01, Helsinki.

Heal, J. S., Gheduzzi, S., Learmonth, I. D. and Miles, A. W., 2003. Does size matter, or is it just technique? The relevance of stem taper angle in revision arthroplasty in a cemented environment. In: Journal of Bone and Joint Surgery Proceedings, 2004-09-01, Helsinki.

Sirkett, D. M., Mullineux, G., Miles, A. W. and Giddins, G. E. B., 2003. Does the minimum energy principle govern wrist kinematics? In: Proc. IASTED International Conference on Biomechanics 2003, 2003-01-01.

Clements, J. P., Gheduzzi, S., Heal, J., Learmonth, I. D. and Miles, A. W., 2003. Measurement of the micromtion and migration of an uncemented stem in an in-vitro test. In: Proc IASTED Int Conf -Biomechanics, 2003-01-01, Rhodes.

Gheduzzi, S., Clements, J., Latimer, P., Schmotzer, H., Learmonth, I. D. and Miles, A. W., 2003. Post-operative stability of cementless hip stems: an in-vitro study under physiological conditions. In: European Orthopaedic Research Society Meeting, 2003-01-01, Helsinki.

Turner, H. C., Yate, R. M., Giddins, G. E. B. and Miles, A. W., 2003. The influence of chair geometry on sit-to-stand forces. In: Proceedings IASTED Int Conf -Biomechanics, 2003-01-01, Rhodes.

Wilson, A. J., Brook, B. S., Murphy, C. M., Breen, D., Miles, A. W. and Tilley, D. G., 2002. Multi-modal modelling of the human respiratory system in intensive care. In: IFMBE Proceedings, 2002-12-01, Vienna.

Vadivelu, R., Baker, A. S., Miles, A. W., Gheduzzi, S., Cunningham, J. L. and Chetwynd, D. G., 2002. A mechanical comparison of dynamic compression plate, limited contact dynamic compression plate and the fixclips. In: British Trauma Society, 2002-10-01, Leeds.

Leonard, L., Sirkett, D., Mullineux, G., Giddins, G. E. B. and Miles, A. W., 2002. A novel, non-invasive method of measuring wrist joint movement in-vivo. In: British Hand Society Meeting, 2002-10-01, London.

Phipps, K., Saksena, J., Allwood, S. M., Miles, A. W., Goodship, A., Blunn, G., Leyvraz, P. F., Pioletti, D., Quinn, T. and Ph Zysset, [N. V.], 2002. Intra-operative force measurement of impaction allografting. In: European Orthopaedic Research Society Meeting, 2003-01-01, Helsinki.

Heal, J., Gheduzzi, S., Learmonth, I. D., Miles, A. W., Leyvraz, P. F. and Pioletti, D., 2002. Optimising the biomechanical environment of impaction bone graft in revision hip surgery, the role of the femoral stem taper angle. In: European Orthopaedic Research Society Meeting, 2003-01-01, Helsinki.

Leonard, L., Sirkett, D. M., Langdon, I. J., Mullineux, G., Tilley, D. G., Keogh, P. S., Cunningham, J. L., Cole, M. O. T., Prest, P. H., Miles, A. W. and Giddins, G. E. B., 2002. Engineering a new wrist joint replacement prosthesis - A multidisciplinary approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (9), pp. 1297-1302.

Vadivelu, R., Baker, A. S., Miles, A. W., Cunningham, J. L., Gheduzzi, S. and Chetwynd, D., 2002. A biomechanical study of dynamic compression plate, limited contact dynamic compression plate and the fixclips. In: 12th Annual Meeting of the European Orthopaedic Research Society, 2002-01-01, Lausanne.

Leonard, L., Sirkett, D., Mullineux, G., Giddins, G. E. B. and Miles, A. W., 2002. A new method of estimating the axes of wrist joint motion in vivo. In: British Orthopaedic Research Society, 2002-01-01, Cardiff.

Langdon, I. J., Leonard, L., Tilley, D. G., Keogh, P. S., Cole, M. O. T., Cunningham, J. L., Miles, A. W. and Giddins, G. E. B., 2002. A simulator for evaluation of total wrist arthroplasties. In: British Orthopaedic Research Society, 2002-01-01, Cardiff.

Langdon, I. J., Leonard, L., Tilley, D. G., Cunningham, J. L., Giddins, G. E. B. and Miles, A. W., 2002. A simulator to investigate load transfer between implant and bone for wrist arthroplasty. In: SICOT Trainees Meeting, 2002-01-01, St Petersburg, Russia.

Armstrong, M., Spencer, R. F., Lovering, A. M., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2002. Antibiotic elution from bone cement: A study of common cement-antibiotic combinations. Hip International, 12 (1), pp. 23-27.

Casey, B. P., Turner, I. G., Miles, A. W. and Gittings, J. P., 2002. Characterisation of biphasic calcium phosphate for use as bone substitutes. In: European Society of Biomaterials, 2002-01-01, Barcelona.

Grimm, B., Gozzard, C., Miles, A. W. and Turner, I. G., 2002. Comparing compression properties of bone grafts, ceramic grafts and graft mixes for impaction grafting. In: European Society of Biomaterials, 2002-01-01, Barcelona.

Grimm, B., Gozzard, C., Miles, A. W. and Turner, I. G., 2002. Compression properties of morsellised bone graft and synthetic alternatives for impaction grafting. In: European Society of Biomechanics Meeting, 2002-01-01, Poland.

Grimm, B., Gozzard, C., Miles, A. W. and Turner, I. G., 2002. Compression testing of bone grafts for impaction grafting. In: Transactions 48th Orthopaedic Research Society, 2002-01-01, Dallas.

Langdon, I. J., Leonard, L., Tilley, D. G., Keogh, P. S., Cole, M. O. T., Cunningham, J. L., Miles, A. W. and Giddins, G. E. B., 2002. Development of a wrist simulator. In: European Society of Biomechanics Meeting, 2002-01-01, Poland.

Grimm, B., Blom, A. W., Miles, A. W. and Turner, I. G., 2002. In-vitro endurance testing of bone graft materials for Impaction Grafting. In: Bioceramics 14, 2002-01-01.

Gheduzzi, S., Hodey, J., Latimer, P., Schmotzer, H. and Miles, A. W., 2002. In-vitro migration and micromotion measurements of a cementless hip stem under physiological loading conditions. In: Proc Int. Conf: Engineers and Surgeons Joined at the Hip, London:, 2002-01-01.

Gheduzzi, S., Latimer, P., Schmotzer, H., Miles, A. W. and Learmonth, I. D., 2002. In-vitro stability of cementless total hip replacement stems. In: 5th EBRA Meeting, 2002-01-01, Sheffield.

Blom, A. W., Grimm, B., Cunningham, J., Miles, A. W. and Learmonth, I. D., 2002. In-vitro testing of BoneSave, a ceramic bone graft substitute for use in impaction grafting. In: Bioceramics 14, 2002-01-01.

Reading, A. D., Miles, A. W. and Bannister, G. C., 2002. Keyholes in actetabular preparation. Hip International, 12 (2), pp. 163-165.

Armstrong, M. S., Spencer, R. F., Cunningham, J. L., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2002. Mechanical characteristics of antibiotic-laden bone cement. Acta Orthopaedica Scandinavica, 73 (6), pp. 688-690.

Blom, A. W., Grimm, B., Miles, A. W., Cunningham, J. L. and Learmonth, I. D., 2002. Subsidence in impaction grafting: the effect of adding a ceramic bone graft extender to bone. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 216 (H4), pp. 265-270.

Sirkett, D. M., Mullineux, G., Leonard, L., Giddins, G. E. B. and Miles, A. W., 2002. The application of optimization in establishing wrist joint axes of motion. 15th Annual Symposium of International Society for Technology in Arthroplasty, Oxford:, 86-B (13).

Gozzard, C., Grimm, B., Miles, A. W. and Learmonth, I. D., 2002. The effect of preparatory technique on the compressive properties of morsellised bone graft. Hip International, 12 (2), pp. 116-118.

Gheduzzi, S., Cunningham, J. L., Humphrey, V. F. and Miles, A. W., 2002. Ultrasound propagation in long bones as quantative measure of fracture healing. In: British Orthopaedic Research Society, 2002-01-01, Cardiff.

Grimm, B., Miles, A. W. and Turner, I. G., 2001. Hydroxyapatite/tricalcium-phosphate as a bone graft extender for impaction grafting. In: European Society for Biomaterials, 2007-09-01, Brighton.

Grimm, B. P., Miles, A. W. and Turner, I. G., 2001. Optimising a hydroxyapatite/tricalcium-phosphate ceramic as a bone graft extender for impaction grafting. In: European Society for Biomaterials, 2007-09-01, Brighton.

Casey, B. P., Turner, I. G. and Miles, A. W., 2001. Production of porous biphasic calcium phosphate materials for use in bone graft applications. In: European Society for Biomaterials, 2007-09-01, Brighton.

Grimm, B., Miles, A. W. and Turner, I. G., 2001. Hydroxyapatite/tricalcium-phosphate as a bone graft extender for impaction grafting revision hip surgery. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Spencer, R. F., Armstrong, M., Cunningham, J. L., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2001. Mechanical characteristics of antibiotic-laden bone cement. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Drosos, G., Karnezis, I. A., Bishay, M. and Miles, A. W., 2001. Rotational stability of dynamically-nailed-fractures of the distal tibial diaphysis. A biomechanical parametric study. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Gheduzzi, S., Humphrey, V. F., Cunningham, J. L. and Miles, A. W., 2001. A novel use of quantitative ultrasound for the monitoring of fracture healing in human long bones.

Gheduzzi, S., Miles, A. W., Humphrey, V. F. and Cunningham, J. L., 2001. In-vitro evaluation of quantitative ultrasound as a clinical tool for fracture healing assessment in human long bones. In: 47th Annual Meeting of the Orthopaedic Research Society, 2001-02-25 - 2001-02-28, San Francisco, CA.

Grimm, B., Blom, A., Miles, A. W. and Turner, I. G., 2001. Mechanical properties of morsellized bone graft and synthetic substitutes for impaction grafting total hip revision arthroplasty. In: Orthopaedic Research Society,, 2001-02-01, San Francisco.

Armstrong, M., Spencer, R. F., Lovering, A. M., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2001. Antibiotic elution from bone cement. In: J Bone Joint Surg, Orthopaedic Proceedings, Suppl I, 2001-01-01.

Miles, A. W., Drosos, D., Karnezis, I. A. and Bishay, M., 2001. Biomechanical comparison of tibial interlocking nails using simulated fracture healing. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Miles, A. W., Karnezis, I. A., Fragkiadakis, E. G. and Vossinakis, I. C., 2001. Biomechanical parameters of biological fixation of the femur using the bridging and wave plating techniques. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Karnezis, I. A., Fragkiadakis, E. G., Panagiotopolous, E., Miles, A. W. and Cunningham, J. L., 2001. Biomechanics of a new uniform-pitch headless screw for minimally-invasive osteosynthesis. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Karnezis, I. A., Drosos, D., Fragkiadakis, E. G., Panagiotopolous, E., Vossinakis, I. C., Cunningham, J. L. and Miles, A. W., 2001. Biomechanics of non-contact plating of diaphyseal fractures - a biomechanical study using simulated fracture healing. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Grimm, B., Miles, A. W. and Turner, I. G., 2001. Hydroxyapatite/Tricalcium-Phosphate as a bone graft extender for impaction grafting revision surgery. In: European Federation of National Associations of Orthopaedics and Traumatology, 2001-01-01.

Gheduzzi, S., Miles, A. W., Humphrey, V. F. and Cunningham, J. L., 2001. In vitro evaluation of quantitative ultrasound as a clinical tool for fracture healing assessment in human long bones. In: Transactions 50th Orthopaedic Research Society, 2004-01-01, San Francisco.

Grimm, B., Miles, A. W. and Turner, I. G., 2001. In-vitro analysis of initial mechanical stability of morsellised bone graft and extenders for impaction grafting. In: Transactions 4th Combined Meeting of Orthopaedic Research Societies of USA, Europe, Canada and Japan, 2001-01-01, Rhodes.

Drosos, D., Karnezis, I. A., Bishay, M. and Miles, A. W., 2001. Initial rotational stability of dynamically-nailed distal tibial fractures: the importance of fracture type and degree of cortical contact. Injury, 32 (2), pp. 137-143.

Blom, A. W., Grimm, B., Miles, A. W. and Cunningham, J. L., 2001. Mechanical studies on a ceramic bone graft substitute for use in revision total hip arthroplasty. In: 5th Congress of EFORT, 2001-06-01, Rhodes.

Heal, J. S., Blom, A. W., Miles, A. W. and Learmonth, I. D., 2001. Morsellized impaction bone gratfing - A review article. Orthopaedic Updates, 11 (3), pp. 28-35.

Grimm, B., Miles, A. W. and Turner, I. G., 2001. Optimizing a hydroxyapatite/tricalcium-phosphate ceramic as a bone graft extender for impaction grafting. Journal of Materials Science: Materials in Medicine, 12 (10-12), pp. 929-934.

Hsu, Y. H., Turner, I. G. and Miles, A. W., 2001. The Effect of Slip Loading on the Properties of Porous Calcium Phosphate Bioceramics. In: Proceedings of Bioceramics 20, 2001-01-01, Nantes.

Gozzard, C., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2001. The effect of a proximal femoral stem centraliser on cement pressurisation during stem inserrtion. In: British Orthopaedic Research Society Meeting, 2001-01-01, Southampton.

Taylor, A. H., Stibbs, M., Miles, A. W. and Webb, J., 2001. The effect of tendon suturing techniques on ACL graft tension. An experimental model. British Association for Surgery of the Knee, Norwich, 83-B, p. 386.

Gozzard, C., Gheduzzi, S., Miles, A. W. and Learmonth, I. D., 2001. The femoral stem proximal centraliser and its effect on cement pressurisation. In: Transactions 4th Combined Meeting of Orthopaedic Research Societies of USA, Europe, Canada and Japan, 2001-01-01, Rhodes.

Sirkett, D. M., Miles, A. W., Giddins, G., Mullineux, G. and Wood, L., 2001. Three dimensional constraint modelling of the wrist. In: 8th Congress of the International Federation of Societies for Surgery of the Hand (IFSSH), 2001-01-01.

Gheduzzi, S., Cunningham, J. L., Miles, A. W. and Humphrey, V. F., 2000. Feasibility of fracture healing measurement using ultrasound velocity and attenuation.

Gheduzzi, S., Cunningham, J. L., Miles, A. W. and Humphrey, V. F., 2000. A computational model of ultrasound propagation in fractured human long bones. In: International Society for Fracture Repair Meeting, 2000-09-01, Hong Kong.

Wilkinson, J. M., Eveleigh, R., Hamer, A. J., Milne, A., Miles, A. W. and Stockley, I., 2000. Effect of mixing technique on the properties of acrylic bone–cement. Journal of Arthroplasty, 15 (5), pp. 663-667.

Grimm, B., Miles, A. W. and Turner, I. G., 2000. Influence of bone graft properties on the stability of impaction grafting revision hip arthroplasty. In: 1st Annual congress UK Society for Biomechanics, 2000-07-01, London.

Drosos, G. I., Karnezis, I. A., Gheduzzi, S., Bishay, M. and Miles, A. W., 2000. Dynamic nailing of tibial fractures and torsional stability. A biomechanical study.

Hill, T. M., Bleakman, M., Earl, C. and Miles, A. W., 2000. Knowledge-based integrated design/cost systems. In: IEE 4th Int Conference. Factory 2000, 2000-01-01, York.

Gheduzzi, S., Miles, A. W., Humphrey, V. F. and Cunningham, J. L., 2000. Long bones fracture healing assessed by quantitative ultrasound. In: Int Society for Fracture Repair (ISFR), 2000-01-01, Hong Kong.

Drosos, G., Karnezis, I. A., Gheduzzi, S., Bishay, M., Miles, A. W. and Stergiopolous, K., 2000. Mechanical characteristics of tibial intramedullary nails. In: 56th Panhellenic Congress, Hellenic Association of Orthopaedic Traumatology, 2000-01-01, Athens.

Grimm, B., Sandford, G. C., Lee, J. R., Miles, A. W. and Turner, I. G., 2000. Mechanical properties of morsellised bone graft and synthetic substitutes for impaction grafting total hip revision arthroplasty. In: Transaction 6th World Biomechanics Congress, 2000-01-01, Hawaii.

Murphy, C. M., Brook, B., Tilley, D. G., Miles, A. W., Breen, D. and Wilson, A. J., 2000. The validation of computer models of a mechanical ventilator and the human respiratory system intended for use in adult intensive care. In: IMACS Symposium on Mathematical Modelling, 2000-02-02 - 2000-02-04, Vienna University of Technology.

Gheduzzi, S., Humphrey, V. F., Miles, A. W. and Cunningham, J. L., 1999. Fracture healing assessment using ultrasound velocity and attenuation.

Wilkinson, J. M., Eveliegh, R. J., Hamer, A. J., Miles, A. W. and Stockley, I., 1999. Do syringe mixing and delivery systems produce better cement than bowl mixing systems? In: 4th Congress of EFORT, 1999-01-01, Brussels.

Gheduzzi, S., Cunningham, J. L., Miles, A. W. and Humphrey, V. F., 1999. Fracture healing measurement using ultrasound. In: Physics and Technology of Mechanical Ultrasound, 1999-01-01, York.

Wheeler, J. P., Miles, A. W. and Clift, S. E., 1999. The influence of the time-dependent properties of bone cement on stress in the femoral cement mantle of total hip arthroplasty. Journal of Materials Science: Materials in Medicine, 10 (8), pp. 497-501.

Eveleigh, R. J. and Miles, A. W., 1997. Simulating combined loading in the femur in vitro - a comparison of five configurations. In: Autum Meeting of British Orthopaedic Research Society, 1997-09-01, Cardiff.

Goodship, A. E., Cunningham, J. L., Walker, P., Organov, V., Darling, J., Miles, A. W. and Owen, G. W., 1997. Bone loss during long term space flight is prevented by the application of a short term impulsive mechanical stimulus. In: 12th Man in Space Symposium, 1997-06-01, Washington.

Miles, A., Norman, W., Guy, W. and Colin Wilcox, S., 1997. System für örtlich begrenzte reine Luft und dazugehörender Verteilerkopf. A61G13/00-DE69120950 (T2), 16 January 1997.

Al-Sayyad, C., Goodwin, M. I., Miles, A. W. and Eveleigh, R. J., 1997. An experimental study into the mechanical properties of intramedullary nails in the treatment of simulated subtrochanteric femoral fracture. In: International Symposium Minimal Invasive Traumatology, 1997-01-01, Salzburg.

Haynes, R. C., Poll, R. G., Miles, A. W. and Weston, R. B., 1997. An experimental study of the failure modes of the Gamma Locking Nail and the AO Dynamic Hip Screw under static loading conditions : a cadaveric study. Medical Engineering & Physics, 19 (5), pp. 446-453.

Hayes, A., Clift, S. E. and Miles, A. W., 1997. An investigation of the stress distribution generated in articular cartilage by crystal aggregates of varying material properties. Medical Engineering & Physics, 19 (3), pp. 242-252.

Eveleigh, R. J., Miles, A. W. and Weston, R. B., 1997. Simulating combined loading in the proximal femur for evaluation of fracture fixation systems. In: Transactions European Orthopaedic Research Society, 1997-01-01, Barcelona.

Karnezis, I. A., Miles, A. W., Cunningham, J. L. and Learmonth, I. D., 1997. The effect of axial preload on the preformance of external fixator pins - a mechanical study using a new bone fastener system. In: Autumn Meeting of British Orthopaedic Research Society, 1997-01-01, Cardiff.

Wheeler, J. P., Miles, A. W. and Clift, S. E., 1997. The influence of the stem-cement interface in total hip replacement--a comparison of experimental and finite element approaches. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 211 (2), pp. 181-186.

Culley, S. J., Miles, A. W. and Wood, N. J., 1994. The design continuum: the necessary stages for mechanical and aeronautical engineers. In: 2nd International Symposium in Engineering Education - Product Development in Engineering Education, 1994-10-01, University of Limerick.

Hailey, J. L., Turner, I. G., Miles, A. W. and Price, G., 1994. The effect of post-curing chemical changes on the mechanical properties of acrylic bone cement. Journal of Materials Science: Materials in Medicine, 5 (9-10), pp. 617-621.

Miles, A., Norman, W., Guy, W. and Stephen, W., 1994. Localized clean air system. A61G13/00-US5290331 (A), 01 March 1994.

Majkowski, R. S., Bannister, G. C. and Miles, A. W., 1994. The effect of bleeding on the cement-bone interface: an experimental study. Clinical Orthopaedics and Related Research, 299, pp. 293-297.

Miles, A., Norman, W., Guy, W. and Colin Wilcox, S., 1993. Localised Clean Air System. F24F13/08-AU8688591 (A), 06 May 1993.

Majkowski, R. S., Miles, A. W., Bannister, G. C., Perkins, J. and Taylor, G., 1993. Bone surface preparation in cemented joint replacement. Journal of Bone and Joint Surgery - British Volume, 75B (3), pp. 459-463.

Mileham, A. R., Currie, G. C., Miles, A. W. and Bradford, D. T., 1993. Computer based cost estimating for conceptual design. In: Proc International Forum on Design forManufacture and Assembly, 1993-01-01, Newport RI USA.

Miles, A. W., Dall, D. M., Learmonth, I. D., Solomon, M. and Davenport, J. M., 1993. Fracture and loosening of Charnley femoral stems: comparison between first-generation and subsequent designs. Journal of Bone and Joint Surgery - British Volume, 75B (2), pp. 259-265.

Clift, S. E., Miles, A. W., Harris, B., Dieppe, P. A. and Hayes, A., 1993. Load concentration around crystal aggregate in articular cartilage under short term loading. Journal of Biomechanics, 26 (7), p. 772.

Clift, S. E., Dieppe, P. A., Harris, B., Hayes, A. and Miles, A. W., 1993. Load concentrations around crystal aggregates in articular cartilage under short term loading. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 207 (1), pp. 34-40.

Clift, S. E., Hayes, A., Miles, A. W., Harris, B. and Dieppe, P. A., 1993. Load concentrations around crystal aggregates in articular cartilage under short-term loading. Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine, 207 (1), pp. 35-40.

Miles, A. W., Haynes, R. C. and Majkowski, R. J., 1992. A static and dynamic evaluation of the sliding characteristics of gamma locking nails. In: Transactions 4th World Biomaterials Conference, 1992-01-01, Berlin.

Currie, C. G., Mileham, A. R. and Miles, A. W., 1992. Computer cost estimating at the conceptual stage of design. In: Proc Sunderland Advanced Manufacturing Technology Conference, 1992-04-01 - 1992-04-03, Sunderland.

Currie, C. G., Mileham, A. R., Bradford, D. T. and Miles, A. W., 1992. Conceptual cost estimating at the conceptual stage of the Design Process. In: Proc 6th ISPE/IFAC International Conference on CADCAM Robotics and Factories of the Future (CARS&FOF92, 1992-01-01, London.

Mileham, A. R., Currie, G. C., Miles, A. W. and Bradford, D. T., 1992. Conceptual cost information as an aid to the designer. In: International Operations - Crossing Boarders in Manufacturing and Service (Proc 7th Annual Conference of the OMAUK), 1992-01-01, UMIST.

Majkowski, R. S., Miles, A. W., Bannister, G. C. and Perkins, H., 1992. The influence of surface preparation on the strength of the bone-cement interface in cemented arthroplasty. In: Transactions 4th World Biomaterials Conference, 1992-01-01, Berlin.

Currie, C. G., Mileham, A. R., Bradford, D. T. and Miles, A. W., 1991. Conceptual cost estimating using complexity criteria. In: Proc 7th National Conference on Manufacturing Research - Advances in Manufacturing Technology VI., 1991-08-01, Hatfield.

Hailey, J. L., Turner, I. G. and Miles, A. W., 1991. The characterization of acrylic bone cement. In: Imaging of Cartilage and Bone Meeting, 1991-06-01, Stanmore.

Currie, G. C., Mileham, A. R., Miles, A. W. and Bradford, D. T., 1990. Cost estimation of polymer products at the conceptual stage of design, advances in Man Tech V. In: Proc 6th National Conference on Manufacturing Research - Advances in Manufacturing Technology V., 1990-09-01, Glasgow.

Dall, D. M., Miles, A. W. and Solomon, M., 1990. The use of the cable grip system in total hip replacement - further report on results. In: 18th World Congress of SICOT, 1990-09-01, Montreal.

Clift, S. E. and Miles, A. W., 1990. A finite element study of the interactions between the stem-cement interface and bone structural support in total hip replacement. In: 1st World Congress of Biomechanics, 1990-01-01, La Jolla, California.

Clift, S. E. and Miles, A. W., 1990. A parametric finite-element analysis of the influence of the stem-cement interface in total hip replacement. In: 7th Meeting of European Society of Biomechanics, 1990-07-01, Aarhus.

Miles, A. W., Clift, S. E., Wainwright, S. and Wood, N., 1990. An experimental and finite element analysis of the influence of the stem- cement interface in total hip replacement. In: Clinical Implant Materials, Advance in Biomaterials, 1990-01-01.

Currie, G. C., Mileham, A. R., Miles, A. W. and Bradford, D. T., 1990. Cost estimation at the conceptual stage of the design process. In: Advances in Manufacturing Technology. Vol. 5. Strathclyde University Prress, pp. 18-22.

Watson, M. B., Miles, A. W. and Clift, S. E., 1990. The influence of curing time and environment on the fracture properties of bone cement. Clinical Materials, 6 (4), pp. 299-305.

Miles, A. W. and Dall, D. M., 1983. Re-attachment of the greater trochanter. The use of the trochanter cable grip system. Journal of Bone and Joint Surgery - British Volume, 65B (1), pp. 55-59.

This list was generated on Fri Nov 21 09:46:13 2014 GMT.